aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-09-23net/mlx4_en: Don't allow aRFS for encapsulated packetsAya Levin1-0/+3
Driver doesn't support aRFS for encapsulated packets, return early error in such a case. Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support") Signed-off-by: Aya Levin <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-23net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabledVladimir Oltean1-3/+8
The blamed commit made the fatally incorrect assumption that ports which aren't in the FORWARDING STP state should not have packets forwarded towards them, and that is all that needs to be done. However, that logic alone permits BLOCKING ports to forward to FORWARDING ports, which of course allows packet storms to occur when there is an L2 loop. The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge do for you", but "what can you do for the bridge". This way, only FORWARDING ports forward to the other FORWARDING ports from the same bridging domain, and we are still compatible with the idea of multiple bridges. Fixes: df291e54ccca ("net: ocelot: support multiple bridges") Suggested-by: Colin Foster <[email protected]> Reported-by: Colin Foster <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: Colin Foster <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-23net: ethernet: mtk_eth_soc: avoid creating duplicate offload entriesFelix Fietkau1-0/+3
Sometimes multiple CLS_REPLACE calls are issued for the same connection. rhashtable_insert_fast does not check for these duplicates, so multiple hardware flow entries can be created. Fix this by checking for an existing entry early Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Ilya Lipnitskiy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-23nfc: st-nci: Add SPI ID matching DT compatibleMark Brown1-0/+1
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding the part name used in the compatible to the list of SPI IDs. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-23MAINTAINERS: remove Guvenc Gulce as net/smc maintainerGuvenc Gulce1-1/+0
Remove myself as net/smc maintainer, as I am leaving IBM soon and can not maintain net/smc anymore. Cc: Julian Wiedmann <[email protected]> Acked-by: Karsten Graul <[email protected]> Signed-off-by: Guvenc Gulce <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-23nexthop: Fix memory leaks in nexthop notification chain listenersIdo Schimmel2-6/+15
syzkaller discovered memory leaks [1] that can be reduced to the following commands: # ip nexthop add id 1 blackhole # devlink dev reload pci/0000:06:00.0 As part of the reload flow, mlxsw will unregister its netdevs and then unregister from the nexthop notification chain. Before unregistering from the notification chain, mlxsw will receive delete notifications for nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw will not receive notifications for nexthops using netdevs that are not dismantled as part of the reload flow. For example, the blackhole nexthop above that internally uses the loopback netdev as its nexthop device. One way to fix this problem is to have listeners flush their nexthop tables after unregistering from the notification chain. This is error-prone as evident by this patch and also not symmetric with the registration path where a listener receives a dump of all the existing nexthops. Therefore, fix this problem by replaying delete notifications for the listener being unregistered. This is symmetric to the registration path and also consistent with the netdev notification chain. The above means that unregister_nexthop_notifier(), like register_nexthop_notifier(), will have to take RTNL in order to iterate over the existing nexthops and that any callers of the function cannot hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN driver. To avoid a deadlock, change the latter to unregister its nexthop listener without holding RTNL, making it symmetric to the registration path. [1] unreferenced object 0xffff88806173d600 (size 512): comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s) hex dump (first 32 bytes): 41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa.... 08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............ backtrace: [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522 [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline] [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline] [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231 [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239 [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83 [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline] [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306 [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244 [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline] [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline] [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913 [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572 [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504 [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590 [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340 [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929 [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline] [<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline] [<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409 [<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463 [<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492 [<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline] [<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline] [<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499 Fixes: 2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-23mac80211-hwsim: fix late beacon hrtimer handlingJohannes Berg1-2/+2
Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time. Suggested-by: Thomas Gleixner <[email protected]> Reported-by: Dmitry Vyukov <[email protected]> Reported-by: [email protected] Fixes: 01e59e467ecf ("mac80211_hwsim: hrtimer beacon") Reviewed-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/20210915112936.544f383472eb.I3f9712009027aa09244b65399bf18bf482a8c4f1@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-09-23mac80211: mesh: fix potentially unaligned accessJohannes Berg1-1/+2
The pointer here points directly into the frame, so the access is potentially unaligned. Use get_unaligned_le16 to avoid that. Fixes: 3f52b7e328c5 ("mac80211: mesh power save basics") Link: https://lore.kernel.org/r/20210920154009.3110ff75be0c.Ib6a2ff9e9cc9bc6fca50fce631ec1ce725cc926b@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-09-23mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotapLorenzo Bianconi1-0/+4
Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Reported-by: [email protected] Fixes: 646e76bb5daf4 ("mac80211: parse VHT info in injected frames") Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/c26c3f02dcb38ab63b2f2534cb463d95ee81bb13.1632141760.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <[email protected]>
2021-09-23mac80211: Drop frames from invalid MAC address in ad-hoc modeYueHaibing1-1/+2
WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554 sta_info_insert_rcu+0x121/0x12a0 Modules linked in: CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253 Workqueue: phy3 ieee80211_iface_work RIP: 0010:sta_info_insert_rcu+0x121/0x12a0 ... Call Trace: ieee80211_ibss_finish_sta+0xbc/0x170 ieee80211_ibss_work+0x13f/0x7d0 ieee80211_iface_work+0x37a/0x500 process_one_work+0x357/0x850 worker_thread+0x41/0x4d0 If an Ad-Hoc node receives packets with invalid source MAC address, it hits a WARN_ON in sta_info_insert_check(), this can spam the log. Signed-off-by: YueHaibing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-09-23mac80211: Fix ieee80211_amsdu_aggregate frag_tail bugChih-Kang Chang1-0/+8
In ieee80211_amsdu_aggregate() set a pointer frag_tail point to the end of skb_shinfo(head)->frag_list, and use it to bind other skb in the end of this function. But when execute ieee80211_amsdu_aggregate() ->ieee80211_amsdu_realloc_pad()->pskb_expand_head(), the address of skb_shinfo(head)->frag_list will be changed. However, the ieee80211_amsdu_aggregate() not update frag_tail after call pskb_expand_head(). That will cause the second skb can't bind to the head skb appropriately.So we update the address of frag_tail to fix it. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Chih-Kang Chang <[email protected]> Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] [reword comment] Signed-off-by: Johannes Berg <[email protected]>
2021-09-23Revert "mac80211: do not use low data rates for data frames with no ack flag"Felix Fietkau1-4/+0
This reverts commit d333322361e7 ("mac80211: do not use low data rates for data frames with no ack flag"). Returning false early in rate_control_send_low breaks sending broadcast packets, since rate control will not select a rate for it. Before re-introducing a fixed version of this patch, we should probably also make some changes to rate control to be more conservative in selecting rates for no-ack packets and also prevent using probing rates on them, since we won't get any feedback. Fixes: d333322361e7 ("mac80211: do not use low data rates for data frames with no ack flag") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-09-22init: Revert accidental changes to print irqs_disabled()Geert Uytterhoeven1-3/+3
Commit f8ade8dddb16 ("xsurf100: drop include of lib8390.c") accidentally changed init/main.c. Revert that part. Fixes: f8ade8dddb16 ("xsurf100: drop include of lib8390.c") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-22MAINTAINERS: Update Xen-[PCI,SWIOTLB,Block] maintainershipKonrad Rzeszutek Wilk1-3/+3
Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Juergen, Roger, and Stefano. Thank you! Acked-by: Juergen Gross <[email protected]> Acked-by: Roger Pau Monné <[email protected]> Acked-by: Stefano Stabellini <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-22MAINTAINERS: Update SWIOTLB maintainershipKonrad Rzeszutek Wilk1-2/+3
Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Christoph Hellwig. Thank you! Acked-by: Christoph Hellwig <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-22MAINTAINERS: update entry for NIOS2Dinh Nguyen1-2/+2
Ley Foon has left Intel and will no longer be able to maintain NIOS2. Update the MAINTAINER's entry to Dinh Nguyen. Acked-by: Ley Foon Tan <[email protected]> Signed-off-by: Dinh Nguyen <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-22Merge tag 'spi-fix-v5.15-rc1' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi modalias fix from Mark Brown: "Fix modalias issues As reported by Russell King the change to use OF style modaliases for DT enumerated broke at least the spi-nor driver, the patch here reverts that change to fix the regression. Sadly this will mean that anything that started loading since the change to OF modaliases will run into issues, there doesn't seem to be any approach which doesn't cause some problems and thi seems like the least bad approach - gory details are in the commit log for the change. I'm currently working through the SPI drivers to add ID tables and missing IDs to tables which should address things from the other end, this seems more straightforward and robust than any other options" * tag 'spi-fix-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Revert modalias changes
2021-09-22Merge tag 'nfsd-5.15-2' of ↵Linus Torvalds2-14/+15
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: "Critical bug fixes: - Fix crash in NLM TEST procedure - NFSv4.1+ backchannel not restored after PATH_DOWN" * tag 'nfsd-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN NLM: Fix svcxdr_encode_owner()
2021-09-22Merge tag 'platform-drivers-x86-v5.15-2' of ↵Linus Torvalds7-15/+77
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "The first round of bug-fixes for platform-drivers-x86 for 5.15, highlights: - amd-pmc fix for some suspend/resume issues - intel-hid fix to avoid false-positive SW_TABLET_MODE=1 reporting - some build error/warning fixes - various DMI quirk additions" * tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX platform/x86/intel: hid: Add DMI switches allow list platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error platform/x86: amd-pmc: Increase the response register timeout platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet lg-laptop: Correctly handle dmi_get_system_info() returning NULL platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()
2021-09-22MAINTAINERS: ARM/VT8500, remove defunct e-mailJiri Slaby1-2/+1
[email protected] is defunct: 4.1.2 <[email protected]>: Recipient address rejected: Domain not found Remove it from MAINTAINERS and mark the ARM/VT8500 entry orphan. Signed-off-by: Jiri Slaby <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-22mptcp: ensure tx skbs always have the MPTCP extPaolo Abeni1-2/+2
Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. Reported-and-tested-by: [email protected] Fixes: 1094c6fe7280 ("mptcp: fix possible divide by zero") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-22qed: rdma - don't wait for resources under hw error recovery flowShai Malin2-0/+16
If the HW device is during recovery, the HW resources will never return, hence we shouldn't wait for the CID (HW context ID) bitmaps to clear. This fix speeds up the error recovery flow. Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery") Signed-off-by: Michal Kalderon <[email protected]> Signed-off-by: Ariel Elior <[email protected]> Signed-off-by: Shai Malin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-21Merge branch 's390-qeth-fixes-2021-09-21'Jakub Kicinski6-19/+18
Julian Wiedmann says: ==================== s390/qeth: fixes 2021-09-21 This brings two fixes for deadlocks when a device is removed while it has certain types of async work pending. And one additional fix for a missing NULL check in an error case. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-21s390/qeth: fix deadlock during failing recoveryAlexandra Winter3-4/+11
Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter <[email protected]> Reviewed-by: Julian Wiedmann <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-21s390/qeth: Fix deadlock in remove_disciplineAlexandra Winter4-15/+4
Problem: qeth_close_dev_handler is a worker that tries to acquire card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline(). Since commit b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") qeth_remove_discipline() is called under card->discipline_mutex and cancels the work and waits for it to finish. STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the only situation that schedules close_dev_work. In that situation scheduling qeth recovery will also result in an offline interface, when resetting the isolation mode fails, if the external switch is still set to VEB. And since commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") qeth recovery does not aquire card->discipline_mutex anymore. So we accept the longer pathlength of qeth_schedule_recovery in this error situation and re-use the existing function. As a side-benefit this changes the hwtrap to behave like during recovery instead of like during a user-triggered set_offline. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter <[email protected]> Acked-by: Julian Wiedmann <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-21s390/qeth: fix NULL deref in qeth_clear_working_pool_list()Julian Wiedmann1-0/+3
When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Fixes: eff73e16ee11 ("s390/qeth: tolerate pre-filled RX buffer") Reported-by: Stefan Raspl <[email protected]> Root-caused-by: Heiko Carstens <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Alexandra Winter <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-21spi: Revert modalias changesMark Brown1-8/+0
During the v5.13 cycle we updated the SPI subsystem to generate OF style modaliases for SPI devices, replacing the old Linux style modalises we used to generate based on spi_device_id which are the DT style name with the vendor removed. Unfortunately this means that we start only reporting OF style modalises and not the old ones and there is nothing that ensures that drivers list every possible OF compatible string in their OF ID table. The result is that there are systems which have been relying on loading modules based on the old style that are now broken, as found by Russell King with spi-nor on Macchiatobin. spi-nor is a particularly problematic case for this, it only lists a single generic DT compatible jedec,spi-nor in the driver but supports a huge raft of device specific compatibles, with a large set of part numbers many of which are offered by multiple vendors. Russell's searches of upstream device trees has turned up examples with vendor names written in non-standard ways too. To make matters worse up until 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding") the generic compatible was not part of the binding so there are device trees out there written to that binding version which don't list it all. The sheer number of parts supported together with our previous approach of ignoring the vendor ID makes robustly fixing this by adding compatibles to the spi-nor driver seem problematic, the current DT binding document does not list all the parts supported by the driver at the minute (further patches will fix this). I've also investigated supporting both formats of modalias simultaneously but that doesn't seem possible, especially without breaking our userspace ABI which is obviously not viable. Instead revert the relevant changes for now: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support") 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") This will unfortunately mean that any system which had started having modules autoload based on the OF compatibles for drivers that list things there but not in the spi_device_ids will now not have those modules load which is itself a regression. Since it affects a narrower time window and the particularly problematic spi-nor driver may be critical to system boot on smaller systems this seems the best of a series of bad options. I will start an audit of SPI drivers to identify and fix cases where things won't autoload using spi_device_id, this is not great but seems to be the best way forward that anyone has been able to identify. Thanks to Russell for both his report and the additional diagnostic and analysis work he has done here, the detailed research above was his work. Fixes: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support") Fixes: 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") Reported-by: Russell King (Oracle) <[email protected]> Suggested-by: Russell King (Oracle) <[email protected]> Signed-off-by: Mark Brown <[email protected]> Tested-by: Russell King (Oracle) <[email protected]> Cc: Andreas Schwab <[email protected]> Cc: Marco Felsch <[email protected]>
2021-09-21Merge tag 's390-5.15-ebpf-jit-fixes' of ↵Linus Torvalds1-32/+38
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 eBPF fixes from Vasily Gorbik: "Johan Almbladh has implemented a number of new testcases for eBPF [1], which uncovered three miscompilation issues in the s390 eBPF JIT" Link: https://lore.kernel.org/bpf/[email protected]/ [1] * tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/bpf: Fix optimizing out zero-extensions s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant s390/bpf: Fix branch shortening during codegen pass
2021-09-21qnx4: work around gcc false positive warning bugLinus Torvalds1-9/+27
In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried to teach gcc about how the directory entry structure can be two different things depending on a status flag. It made the code clearer, and it seemed to make gcc happy. However, Arnd points to a gcc bug, where despite using two different members of a union, gcc then gets confused, and uses the size of one of the members to decide if a string overrun happens. And not necessarily the rigth one. End result: with some configurations, gcc-11 will still complain about the source buffer size being overread: fs/qnx4/dir.c: In function 'qnx4_readdir': fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread] 76 | size = strnlen(name, size); | ^~~~~~~~~~~~~~~~~~~ fs/qnx4/dir.c:26:22: note: source object declared here 26 | char de_name; | ^~~~~~~ because gcc will get confused about which union member entry is actually getting accessed, even when the source code is very clear about it. Gcc internally will have combined two "redundant" pointers (pointing to different union elements that are at the same offset), and takes the size checking from one or the other - not necessarily the right one. This is clearly a gcc bug, but we can work around it fairly easily. The biggest thing here is the big honking comment about why we do what we do. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6 Reported-and-tested-by: Arnd Bergmann <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-21platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AXTobias Jakobi1-0/+1
Tested with a AMD Ryzen 7 5800X. Signed-off-by: Tobias Jakobi <[email protected]> Acked-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-09-21platform/x86/intel: hid: Add DMI switches allow listJosé Expósito1-5/+22
Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE reports. Add an allow list and accept such reports only from devices in it. Bug reported for Dell XPS 17 9710 on: https://gitlab.freedesktop.org/libinput/libinput/-/issues/662 Reported-by: Tobias Gurtzick <[email protected]> Suggested-by: Hans de Goede <[email protected]> Tested-by: Tobias Gurtzick <[email protected]> Signed-off-by: José Expósito <[email protected]> Link: https://lore.kernel.org/r/[email protected] [[email protected]: Check dmi_switches_auto_add_allow_list only once] Signed-off-by: Hans de Goede <[email protected]>
2021-09-21platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build errorRandy Dunlap1-2/+1
When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there is a linker error since the LEDS trigger code is built as a loadable module. This happens because DELL_WMI_PRIVACY is a bool that depends on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous. ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe': dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get' Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Randy Dunlap <[email protected]> Cc: Perry Yuan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Hans de Goede <[email protected]> Cc: Mark Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2021-09-21Merge branch 'dsa-devres'David S. Miller2-4/+10
Vladimir Oltean says: ==================== Fix mdiobus users with devres Commit ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") by Bartosz Golaszewski has introduced two classes of potential bugs by making the devres callback of devm_mdiobus_alloc stop calling mdiobus_unregister. The exact buggy circumstances are presented in the individual commit messages. I have searched the tree for other occurrences, but at the moment: - for issue (a) I have no concrete proof that other buses except SPI and I2C suffer from it, and the only SPI or I2C device drivers that call of_mdiobus_alloc are the DSA drivers that leave a NULL ds->slave_mii_bus and a non-NULL ds->ops->phy_read, aka ksz9477, ksz8795, lan9303_i2c, vsc73xx-spi. - for issue (b), all drivers which call of_mdiobus_alloc either use of_mdiobus_register too, or call mdiobus_unregister sometime within the ->remove path. Although at this point I've seen enough strangeness caused by this "device_del during ->shutdown" that I'm just going to copy the SPI and I2C subsystem maintainers to this patch series, to get their feedback whether they've had reports about things like this before. I don't think other buses behave in this way, it forces SPI and I2C devices to have to protect themselves from a really strange set of issues. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-09-21net: dsa: realtek: register the MDIO bus under devresVladimir Oltean1-1/+1
The Linux device model permits both the ->shutdown and ->remove driver methods to get called during a shutdown procedure. Example: a DSA switch which sits on an SPI bus, and the SPI bus driver calls this on its ->shutdown method: spi_unregister_controller -> device_for_each_child(&ctlr->dev, NULL, __unregister); -> spi_unregister_device(to_spi_device(dev)); -> device_del(&spi->dev); So this is a simple pattern which can theoretically appear on any bus, although the only other buses on which I've been able to find it are I2C: i2c_del_adapter -> device_for_each_child(&adap->dev, NULL, __unregister_client); -> i2c_unregister_device(client); -> device_unregister(&client->dev); The implication of this pattern is that devices on these buses can be unregistered after having been shut down. The drivers for these devices might choose to return early either from ->remove or ->shutdown if the other callback has already run once, and they might choose that the ->shutdown method should only perform a subset of the teardown done by ->remove (to avoid unnecessary delays when rebooting). So in other words, the device driver may choose on ->remove to not do anything (therefore to not unregister an MDIO bus it has registered on ->probe), because this ->remove is actually triggered by the device_shutdown path, and its ->shutdown method has already run and done the minimally required cleanup. This used to be fine until the blamed commit, but now, the following BUG_ON triggers: void mdiobus_free(struct mii_bus *bus) { /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); bus->state = MDIOBUS_RELEASED; put_device(&bus->dev); } In other words, there is an attempt to free an MDIO bus which was not unregistered. The attempt to free it comes from the devres release callbacks of the SPI device, which are executed after the device is unregistered. I'm not saying that the fact that MDIO buses allocated using devres would automatically get unregistered wasn't strange. I'm just saying that the commit didn't care about auditing existing call paths in the kernel, and now, the following code sequences are potentially buggy: (a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device located on a bus that unregisters its children on shutdown. After the blamed patch, either both the alloc and the register should use devres, or none should. (b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no mdiobus_unregister at all in the remove path. After the blamed patch, nobody unregisters the MDIO bus anymore, so this is even more buggy than the previous case which needs a specific bus configuration to be seen, this one is an unconditional bug. In this case, the Realtek drivers fall under category (b). To solve it, we can register the MDIO bus under devres too, which restores the previous behavior. Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Lino Sanfilippo <[email protected]> Reported-by: Alvin Šipraga <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-21net: dsa: don't allocate the slave_mii_bus using devresVladimir Oltean1-3/+9
The Linux device model permits both the ->shutdown and ->remove driver methods to get called during a shutdown procedure. Example: a DSA switch which sits on an SPI bus, and the SPI bus driver calls this on its ->shutdown method: spi_unregister_controller -> device_for_each_child(&ctlr->dev, NULL, __unregister); -> spi_unregister_device(to_spi_device(dev)); -> device_del(&spi->dev); So this is a simple pattern which can theoretically appear on any bus, although the only other buses on which I've been able to find it are I2C: i2c_del_adapter -> device_for_each_child(&adap->dev, NULL, __unregister_client); -> i2c_unregister_device(client); -> device_unregister(&client->dev); The implication of this pattern is that devices on these buses can be unregistered after having been shut down. The drivers for these devices might choose to return early either from ->remove or ->shutdown if the other callback has already run once, and they might choose that the ->shutdown method should only perform a subset of the teardown done by ->remove (to avoid unnecessary delays when rebooting). So in other words, the device driver may choose on ->remove to not do anything (therefore to not unregister an MDIO bus it has registered on ->probe), because this ->remove is actually triggered by the device_shutdown path, and its ->shutdown method has already run and done the minimally required cleanup. This used to be fine until the blamed commit, but now, the following BUG_ON triggers: void mdiobus_free(struct mii_bus *bus) { /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); bus->state = MDIOBUS_RELEASED; put_device(&bus->dev); } In other words, there is an attempt to free an MDIO bus which was not unregistered. The attempt to free it comes from the devres release callbacks of the SPI device, which are executed after the device is unregistered. I'm not saying that the fact that MDIO buses allocated using devres would automatically get unregistered wasn't strange. I'm just saying that the commit didn't care about auditing existing call paths in the kernel, and now, the following code sequences are potentially buggy: (a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device located on a bus that unregisters its children on shutdown. After the blamed patch, either both the alloc and the register should use devres, or none should. (b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no mdiobus_unregister at all in the remove path. After the blamed patch, nobody unregisters the MDIO bus anymore, so this is even more buggy than the previous case which needs a specific bus configuration to be seen, this one is an unconditional bug. In this case, DSA falls into category (a), it tries to be helpful and registers an MDIO bus on behalf of the switch, which might be on such a bus. I've no idea why it does it under devres. It does this on probe: if (!ds->slave_mii_bus && ds->ops->phy_read) alloc and register mdio bus and this on remove: if (ds->slave_mii_bus && ds->ops->phy_read) unregister mdio bus I _could_ imagine using devres because the condition used on remove is different than the condition used on probe. So strictly speaking, DSA cannot determine whether the ds->slave_mii_bus it sees on remove is the ds->slave_mii_bus that _it_ has allocated on probe. Using devres would have solved that problem. But nonetheless, the existing code already proceeds to unregister the MDIO bus, even though it might be unregistering an MDIO bus it has never registered. So I can only guess that no driver that implements ds->ops->phy_read also allocates and registers ds->slave_mii_bus itself. So in that case, if unregistering is fine, freeing must be fine too. Stop using devres and free the MDIO bus manually. This will make devres stop attempting to free a still registered MDIO bus on ->shutdown. Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Lino Sanfilippo <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Tested-by: Lino Sanfilippo <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-21Doc: networking: Fox a typo in ice.rstMasanari Iida1-1/+1
This patch fixes a spelling typo in ice.rst Signed-off-by: Masanari Iida <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-21net: dsa: fix dsa_tree_setup error pathVladimir Oltean1-0/+1
Since the blamed commit, dsa_tree_teardown_switches() was split into two smaller functions, dsa_tree_teardown_switches and dsa_tree_teardown_ports. However, the error path of dsa_tree_setup stopped calling dsa_tree_teardown_ports. Fixes: a57d8c217aad ("net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-21Merge branch 'smc-fixes'David S. Miller2-1/+4
Karsten Graul says: ==================== net/smc: fixes 2021-09-20 Please apply the following patches for smc to netdev's net tree. The first patch adds a missing error check, and the second patch fixes a possible leak of a lock in a worker. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-09-21net/smc: fix 'workqueue leaked lock' in smc_conn_abort_workKarsten Graul1-0/+2
The abort_work is scheduled when a connection was detected to be out-of-sync after a link failure. The work calls smc_conn_kill(), which calls smc_close_active_abort() and that might end up calling smc_close_cancel_work(). smc_close_cancel_work() cancels any pending close_work and tx_work but needs to release the sock_lock before and acquires the sock_lock again afterwards. So when the sock_lock was NOT acquired before then it may be held after the abort_work completes. Thats why the sock_lock is acquired before the call to smc_conn_kill() in __smc_lgr_terminate(), but this is missing in smc_conn_abort_work(). Fix that by acquiring the sock_lock first and release it after the call to smc_conn_kill(). Fixes: b286a0651e44 ("net/smc: handle incoming CDC validation message") Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-21net/smc: add missing error check in smc_clc_prfx_set()Karsten Graul1-1/+2
Coverity stumbled over a missing error check in smc_clc_prfx_set(): *** CID 1475954: Error handling issues (CHECKED_RETURN) /net/smc/smc_clc.c: 233 in smc_clc_prfx_set() >>> CID 1475954: Error handling issues (CHECKED_RETURN) >>> Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times). 233 kernel_getsockname(clcsock, (struct sockaddr *)&addrs); Add the return code check in smc_clc_prfx_set(). Fixes: c246d942eabc ("net/smc: restructure netinfo for CLC proposal msgs") Reported-by: Julian Wiedmann <[email protected]> Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-21netfilter: conntrack: serialize hash resizes and cleanupsEric Dumazet1-33/+37
Syzbot was able to trigger the following warning [1] No repro found by syzbot yet but I was able to trigger similar issue by having 2 scripts running in parallel, changing conntrack hash sizes, and: for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done It would take more than 5 minutes for net_namespace structures to be cleaned up. This is because nf_ct_iterate_cleanup() has to restart everytime a resize happened. By adding a mutex, we can serialize hash resizes and cleanups and also make get_next_corpse() faster by skipping over empty buckets. Even without resizes in the picture, this patch considerably speeds up network namespace dismantles. [1] INFO: task syz-executor.0:8312 can't die for more than 144 seconds. task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408 preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35 __local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390 local_bh_enable include/linux/bottom_half.h:32 [inline] get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline] nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275 nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171 setup_net+0x639/0xa30 net/core/net_namespace.c:349 copy_net_ns+0x319/0x760 net/core/net_namespace.c:470 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3128 __do_sys_unshare kernel/fork.c:3202 [inline] __se_sys_unshare kernel/fork.c:3200 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f63da68e739 RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000 RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80 R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000 Showing all locks held in the system: 1 lock held by khungtaskd/27: #0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446 2 locks held by kworker/u4:2/153: #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268 #1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272 1 lock held by systemd-udevd/2970: 1 lock held by in:imklog/6258: #0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990 3 locks held by kworker/1:6/8158: 1 lock held by syz-executor.0/8312: 2 locks held by kworker/u4:13/9320: 1 lock held by syz-executor.5/10178: 1 lock held by syz-executor.4/10217: Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-09-21netfilter: log: work around missing softdep backend moduleFlorian Westphal3-3/+34
iptables/nftables has two types of log modules: 1. backend, e.g. nf_log_syslog, which implement the functionality 2. frontend, e.g. xt_LOG or nft_log, which call the functionality provided by backend based on nf_tables or xtables rule set. Problem is that the request_module() call to load the backed in nf_logger_find_get() might happen with nftables transaction mutex held in case the call path is via nf_tables/nft_compat. This can cause deadlocks (see 'Fixes' tags for details). The chosen solution as to let modprobe deal with this by adding 'pre: ' soft dep tag to xt_LOG (to load the syslog backend) and xt_NFLOG (to load nflog backend). Eric reports that this breaks on systems with older modprobe that doesn't support softdeps. Another, similar issue occurs when someone either insmods xt_(NF)LOG directly or unloads the backend module (possible if no log frontend is in use): because the frontend module is already loaded, modprobe is not invoked again so the softdep isn't evaluated. Add a workaround: If nf_logger_find_get() returns -ENOENT and call is not via nft_compat, load the backend explicitly and try again. Else, let nft_compat ask for deferred request_module via nf_tables infra. Softdeps are kept in-place, so with newer modprobe the dependencies are resolved from userspace. Fixes: cefa31a9d461 ("netfilter: nft_log: perform module load from nf_tables") Fixes: a38b5b56d6f4 ("netfilter: nf_log: add module softdeps") Reported-and-tested-by: Eric Dumazet <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-09-21netfilter: iptable_raw: drop bogus net_init annotationFlorian Westphal1-1/+1
This is a leftover from the times when this function was wired up via pernet_operations. Now its called when userspace asks for the table. With CONFIG_NET_NS=n, iptable_raw_table_init memory has been discarded already and we get a kernel crash. Other tables are fine, __net_init annotation was removed already. Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Reported-by: youling 257 <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-09-21netfilter: nf_nat_masquerade: defer conntrack walk to work queueFlorian Westphal1-26/+24
The ipv4 and device notifiers are called with RTNL mutex held. The table walk can take some time, better not block other RTNL users. 'ip a' has been reported to block for up to 20 seconds when conntrack table has many entries and device down events are frequent (e.g., PPP). Reported-and-tested-by: Martin Zaharinov <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-09-21netfilter: nf_nat_masquerade: make async masq_inet6_event handling genericFlorian Westphal1-47/+75
masq_inet6_event is called asynchronously from system work queue, because the inet6 notifier is atomic and nf_iterate_cleanup can sleep. The ipv4 and device notifiers call nf_iterate_cleanup directly. This is legal, but these notifiers are called with RTNL mutex held. A large conntrack table with many devices coming and going will have severe impact on the system usability, with 'ip a' blocking for several seconds. This change places the defer code into a helper and makes it more generic so ipv4 and ifdown notifiers can be converted to defer the cleanup walk as well in a follow patch. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-09-21netfilter: nf_tables: Fix oversized kvmalloc() callsPablo Neira Ayuso1-1/+1
The commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") limits the max allocatable memory via kvmalloc() to MAX_INT. Reported-by: [email protected] Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-09-21netfilter: nf_tables: unlink table before deleting itFlorian Westphal1-10/+18
syzbot reports following UAF: BUG: KASAN: use-after-free in memcmp+0x18f/0x1c0 lib/string.c:955 nla_strcmp+0xf2/0x130 lib/nlattr.c:836 nft_table_lookup.part.0+0x1a2/0x460 net/netfilter/nf_tables_api.c:570 nft_table_lookup net/netfilter/nf_tables_api.c:4064 [inline] nf_tables_getset+0x1b3/0x860 net/netfilter/nf_tables_api.c:4064 nfnetlink_rcv_msg+0x659/0x13f0 net/netfilter/nfnetlink.c:285 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 Problem is that all get operations are lockless, so the commit_mutex held by nft_rcv_nl_event() isn't enough to stop a parallel GET request from doing read-accesses to the table object even after synchronize_rcu(). To avoid this, unlink the table first and store the table objects in on-stack scratch space. Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership") Reported-and-tested-by: [email protected] Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-09-21selftests: netfilter: add zone stress test with colliding tuplesFlorian Westphal1-0/+156
Add 20k entries to the connection tracking table, once from the data plane, once via ctnetlink. In both cases, each entry lives in a different conntrack zone and addresses/ports are identical. Expectation is that insertions work and occurs in constant time: PASS: added 10000 entries in 1215 ms (now 10000 total, loop 1) PASS: added 10000 entries in 1214 ms (now 20000 total, loop 2) PASS: inserted 20000 entries from packet path in 2434 ms total PASS: added 10000 entries in 57631 ms (now 10000 total) PASS: added 10000 entries in 58572 ms (now 20000 total) PASS: inserted 20000 entries via ctnetlink in 116205 ms Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-09-21selftests: netfilter: add selftest for directional zone supportFlorian Westphal1-0/+309
Add a script to exercise NAT port clash resolution with directional zones. Add net namespaces that use the same IP address and connect them to a gateway. Gateway uses policy routing based on iif/mark and conntrack zones to isolate the client namespaces. In server direction, same zone with NAT to single address is used. Then, connect to a server from each client netns, using identical connection id, i.e. saddr:sport -> daddr:dport. Expectation is for all connections to succeeed: NAT gatway is supposed to do port reallocation for each of the (clashing) connections. This is based on the description/use case provided in the commit message of deedb59039f111 ("netfilter: nf_conntrack: add direction support for zones"). Cc: Daniel Borkmann <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-09-21netfilter: nat: include zone id in nat table hash againFlorian Westphal1-5/+12
Similar to the conntrack change, also use the zone id for the nat source lists if the zone id is valid in both directions. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.