| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The next patch will start to refer to recovery passes from the
superblock; naturally, we now need identifiers that don't change, since
the existing enum is in the order in which they are run and is not
fixed.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
similar to prt_bitflags(), but for ulong arrays
Signed-off-by: Kent Overstreet <[email protected]>
|
|
we need BCH_SB_ERR_MAX in bcachefs.h
Signed-off-by: Kent Overstreet <[email protected]>
|
|
BCH_REPLICAS_MAX isn't the actual maximum number of pointers in an
extent, it's the maximum number of dirty pointers.
We don't have a real restriction on the number of cached pointers, and
we don't want a fixed size array here anyways - so switch to
DARRAY_PREALLOCATED().
Signed-off-by: Kent Overstreet <[email protected]>
Reported-and-tested-by: Daniel J Blueman <[email protected]>
|
|
Add support to darray for preallocating some number of elements.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
We sometimes use darrays for quite large buffers - the btree write
buffer in particular needs large buffers, since it must be sized to hold
all the write buffer keys outstanding in the journal.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Move the slowpath (actually growing the darray) to an out-of-line
function; also, add some helpers for the upcoming btree write buffer
rewrite.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
If a superblock write hasn't happened (i.e. we never had to go rw), then
c->sb.version will be out of date w.r.t. c->disk_sb.sb->version.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
turns out iterate_iovec() mutates __iov, we need to save our own copy
Signed-off-by: Kent Overstreet <[email protected]>
Reported-by: Marcin Mirosław <[email protected]>
|
|
peek_upto() checks against the end position and bails out before
FILTER_SNAPSHOTS checks; this is because if we end up at a different
inode number than the original search key none of the keys we see might
be visibile in the current snapshot - we might be looking at inode in a
completely different subvolume.
But this is broken, because when we're iterating over extents we're
checking against the extent start position to decide when to bail out,
and the extent start position isn't monotonically increasing until after
we've run FILTER_SNAPSHOTS.
Fix this by adding a simple inode number check where the old bailout
check was, and moving the main check to the correct position.
Signed-off-by: Kent Overstreet <[email protected]>
Reported-by: "Carl E. Thompson" <[email protected]>
|
|
I am stepping down as TJA11XX C45 maintainer.
Andrei Botila will take the responsibility to maintain and improve the
support for TJA11XX C45 PHYs.
Signed-off-by: Radu Pirea (NXP OSS) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some r8168 NICs stop working upon system resume:
[ 688.051096] r8169 0000:02:00.1 enp2s0f1: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000).
[ 688.175131] r8169 0000:02:00.1 enp2s0f1: Link is Down
...
[ 691.534611] r8169 0000:02:00.1 enp2s0f1: PCI error (cmd = 0x0407, status_errs = 0x0000)
Not sure if it's related, but those NICs have a BMC device at function
0:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Realtek RealManage BMC [10ec:816e] (rev 1a)
Trial and error shows that increase the loop wait on
rtl_ep_ocp_read_cond to 30 can eliminate the issue, so let
rtl8168ep_driver_start() to wait a bit longer.
Fixes: e6d6ca6e1204 ("r8169: Add support for another RTL8168FP")
Signed-off-by: Kai-Heng Feng <[email protected]>
Reviewed-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The freeing and re-allocation of algorithm are protected by cpool_mutex,
so it doesn't fix an actual use-after-free, but avoids a deserved
refcount_warn_saturate() warning.
A trivial fix for the racy behavior.
Fixes: 8c73b26315aa ("net/tcp: Prepare tcp_md5sig_pool for TCP-AO")
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Dmitry Safonov <[email protected]>
Tested-by: Bagas Sanjaya <[email protected]>
Reported-by: syzbot <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
m->data needs to be freed when em_text_destroy is called.
Fixes: d675c989ed2d ("[PKT_SCHED]: Packet classification based on textsearch (ematch)")
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Hangyu Hua <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
When parsing emails from .yaml files in particular, stray punctuation
such as a leading '-' can end up in the name. For example, consider a
common YAML section such as:
maintainers:
- [email protected]
This would previously be processed by get_maintainer.pl as:
- <[email protected]>
Make the logic in clean_file_emails more robust by deleting any
sub-names which consist of common single punctuation marks before
proceeding to the best-effort name extraction logic. The output is then
correct:
[email protected]
Some additional comments are added to the function to make things
clearer to future readers.
Link: https://lore.kernel.org/all/[email protected]/
Suggested-by: Joe Perches <[email protected]>
Signed-off-by: Alvin Šipraga <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
While the script correctly extracts UTF-8 encoded names from the
MAINTAINERS file, the regular expressions damage my name when parsing
from .yaml files. Fix this by replacing the Latin-1-compatible regular
expressions with the unicode property matcher \p{L}, which matches on
any letter according to the Unicode General Category of letters.
The proposed solution only works if the script uses proper string
encoding from the outset, so instruct Perl to unconditionally open all
files with UTF-8 encoding. This should be safe, as the entire source
tree is either UTF-8 or ASCII encoded anyway. See [1] for a detailed
analysis.
Furthermore, to prevent the \w expression from matching non-ASCII when
checking for whether a name should be escaped with quotes, add the /a
flag to the regular expression. The escaping logic was duplicated in
two places, so it has been factored out into its own function.
The original issue was also identified on the tools mailing list [2].
This should solve the observed side effects there as well.
Link: https://lore.kernel.org/all/dzn6uco4c45oaa3ia4u37uo5mlt33obecv7gghj2l756fr4hdh@mt3cprft3tmq/ [1]
Link: https://lore.kernel.org/tools/20230726-gush-slouching-a5cd41@meerkat/ [2]
Signed-off-by: Alvin Šipraga <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix readers that are blocked on the ring buffer when buffer_percent
is 100%. They are supposed to wake up when the buffer is full, but
because the sub-buffer that the writer is on is never considered
"dirty" in the calculation, dirty pages will never equal nr_pages.
Add +1 to the dirty count in order to count for the sub-buffer that
the writer is on.
- When a reader is blocked on the "snapshot_raw" file, it is to be
woken up when a snapshot is done and be able to read the snapshot
buffer. But because the snapshot swaps the buffers (the main one with
the snapshot one), and the snapshot reader is waiting on the old
snapshot buffer, it was not woken up (because it is now on the main
buffer after the swap). Worse yet, when it reads the buffer after a
snapshot, it's not reading the snapshot buffer, it's reading the live
active main buffer.
Fix this by forcing a wakeup of all readers on the snapshot buffer
when a new snapshot happens, and then update the buffer that the
reader is reading to be back on the snapshot buffer.
- Fix the modification of the direct_function hash. There was a race
when new functions were added to the direct_function hash as when it
moved function entries from the old hash to the new one, a direct
function trace could be hit and not see its entry.
This is fixed by allocating the new hash, copy all the old entries
onto it as well as the new entries, and then use rcu_assign_pointer()
to update the new direct_function hash with it.
This also fixes a memory leak in that code.
- Fix eventfs ownership
* tag 'trace-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix modification of direct_function hash while in use
tracing: Fix blocked reader of snapshot buffer
ring-buffer: Fix wake ups when buffer_percent is set to 100
eventfs: Fix file and directory uid and gid ownership
|
|
Directly return NULL or 'next' instead of breaking out of the loop.
Signed-off-by: David Laight <[email protected]>
[ Split original patch into two independent parts - Linus ]
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Linus Torvalds <[email protected]>
|
|
osq_wait_next() is passed 'prev' from osq_lock() and NULL from
osq_unlock() but only needs the 'cpu' value to write to lock->tail.
Just pass prev->cpu or OSQ_UNLOCKED_VAL instead.
Should have no effect on the generated code since gcc manages to assume
that 'prev != NULL' due to an earlier dereference.
Signed-off-by: David Laight <[email protected]>
[ Changed 'old' to 'old_cpu' by request from Waiman Long - Linus ]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
struct optimistic_spin_node is private to the implementation.
Move it into the C file to ensure nothing is accessing it.
Signed-off-by: David Laight <[email protected]>
Acked-by: Waiman Long <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Masami Hiramatsu reported a memory leak in register_ftrace_direct() where
if the number of new entries are added is large enough to cause two
allocations in the loop:
for (i = 0; i < size; i++) {
hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
new = ftrace_add_rec_direct(entry->ip, addr, &free_hash);
if (!new)
goto out_remove;
entry->direct = addr;
}
}
Where ftrace_add_rec_direct() has:
if (ftrace_hash_empty(direct_functions) ||
direct_functions->count > 2 * (1 << direct_functions->size_bits)) {
struct ftrace_hash *new_hash;
int size = ftrace_hash_empty(direct_functions) ? 0 :
direct_functions->count + 1;
if (size < 32)
size = 32;
new_hash = dup_hash(direct_functions, size);
if (!new_hash)
return NULL;
*free_hash = direct_functions;
direct_functions = new_hash;
}
The "*free_hash = direct_functions;" can happen twice, losing the previous
allocation of direct_functions.
But this also exposed a more serious bug.
The modification of direct_functions above is not safe. As
direct_functions can be referenced at any time to find what direct caller
it should call, the time between:
new_hash = dup_hash(direct_functions, size);
and
direct_functions = new_hash;
can have a race with another CPU (or even this one if it gets interrupted),
and the entries being moved to the new hash are not referenced.
That's because the "dup_hash()" is really misnamed and is really a
"move_hash()". It moves the entries from the old hash to the new one.
Now even if that was changed, this code is not proper as direct_functions
should not be updated until the end. That is the best way to handle
function reference changes, and is the way other parts of ftrace handles
this.
The following is done:
1. Change add_hash_entry() to return the entry it created and inserted
into the hash, and not just return success or not.
2. Replace ftrace_add_rec_direct() with add_hash_entry(), and remove
the former.
3. Allocate a "new_hash" at the start that is made for holding both the
new hash entries as well as the existing entries in direct_functions.
4. Copy (not move) the direct_function entries over to the new_hash.
5. Copy the entries of the added hash to the new_hash.
6. If everything succeeds, then use rcu_pointer_assign() to update the
direct_functions with the new_hash.
This simplifies the code and fixes both the memory leak as well as the
race condition mentioned above.
Link: https://lore.kernel.org/all/170368070504.42064.8960569647118388081.stgit@devnote2/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Fixes: 763e34e74bb7d ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
In
https://lore.kernel.org/r/20231206110636.GBZXBVvCWj2IDjVk4c@fat_crate.local
I wanted to adjust the alternative patching debug output to the new
changes introduced by
da0fe6e68e10 ("x86/alternative: Add indirect call patching")
but removed the '*' which denotes the ->x86_capability word. The correct
output should be, for example:
[ 0.230071] SMP alternatives: feat: 11*32+15, old: (entry_SYSCALL_64_after_hwframe+0x5a/0x77 (ffffffff81c000c2) len: 16), repl: (ffffffff89ae896a, len: 5) flags: 0x0
while the incorrect one says "... 1132+15" currently.
Add back the '*'.
Fixes: da0fe6e68e10 ("x86/alternative: Add indirect call patching")
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/20231206110636.GBZXBVvCWj2IDjVk4c@fat_crate.local
|
|
The HP Pavilion 14 ec1xxx series uses the HP mainboard 8A0F with the
ALC287 codec.
The mute led can be enabled using the already existing
ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on an HP Pavilion ec1003AU
Signed-off-by: Aabish Malik <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Under heavy traffic, the BlueField Gigabit interface can
become unresponsive. This is due to a possible race condition
in the mlxbf_gige_rx_packet function, where the function exits
with producer and consumer indices equal but there are remaining
packet(s) to be processed. In order to prevent this situation,
read receive consumer index *before* the HW replenish so that
the mlxbf_gige_rx_packet function returns an accurate return
value even if a packet is received into just-replenished buffer
prior to exiting this routine. If the just-replenished buffer
is received and occupies the last RX ring entry, the interface
would not recover and instead would encounter RX packet drops
related to internal buffer shortages since the driver RX logic
is not being triggered to drain the RX ring. This patch will
address and prevent this "ring full" condition.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <[email protected]>
Signed-off-by: David Thompson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- Andy steps down as GPIO reviewer
- Kent becomes a reviewer for GPIO uAPI
- add missing intel file to the relevant MAINTAINERS section
* tag 'gpio-fixes-for-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Add a missing file to the INTEL GPIO section
MAINTAINERS: Remove Andy from GPIO maintainers
MAINTAINERS: split out the uAPI into a new section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Intel PMC GBE LTR regression
- P2SB / PCI deadlock fix
* tag 'platform-drivers-x86-v6.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/pmc: Move GBE LTR ignore to suspend callback
platform/x86/intel/pmc: Allow reenabling LTRs
platform/x86/intel/pmc: Add suspend callback
platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
|
|
Pull block fixes from Jens Axboe:
"Fix for a badly numbered flag, and a regression fix for the badblocks
updates from this merge window"
* tag 'block-6.7-2023-12-29' of git://git.kernel.dk/linux:
block: renumber QUEUE_FLAG_HW_WC
badblocks: avoid checking invalid range in badblocks_check()
|
|
Add my gnu.org mail address.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Mathieu Othacehe <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Konrad Dybcio <[email protected]>
Cc: Matthieu Baerts <[email protected]>
Cc: Matt Ranostay <[email protected]>
Cc: Oleksij Rempel <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Update the email addresses for vmwgfx and vmmouse to reflect the fact that
VMware is now part of Broadcom.
Add a .mailmap entry because the vmware.com address will start bouncing
soon.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zack Rusin <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Cc: Ian Forbes <[email protected]>
Cc: Martin Krastev <[email protected]>
Cc: Maaz Mombasawala <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
A test [1] in Android test suite started failing after [2] was merged. It
turns out that after handling a major fault under per-VMA lock, the
process major fault counter does not register that fault as major. Before
[2] read faults would be done under mmap_lock, in which case
FAULT_FLAG_TRIED flag is set before retrying. That in turn causes
mm_account_fault() to account the fault as major once retry completes.
With per-VMA locks we often retry because a fault can't be handled without
locking the whole mm using mmap_lock. Therefore such retries do not set
FAULT_FLAG_TRIED flag. This logic does not work after [2] because we can
now handle read major faults under per-VMA lock and upon retry the fact
there was a major fault gets lost. Fix this by setting FAULT_FLAG_TRIED
after retrying under per-VMA lock if VM_FAULT_MAJOR was returned. Ideally
we would use an additional VM_FAULT bit to indicate the reason for the
retry (could not handle under per-VMA lock vs other reason) but this
simpler solution seems to work, so keeping it simple.
[1] https://cs.android.com/android/platform/superproject/+/master:test/vts-testcase/kernel/api/drop_caches_prop/drop_caches_test.cpp
[2] https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 12214eba1992 ("mm: handle read faults under the VMA lock")
Signed-off-by: Suren Baghdasaryan <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Special VMAs like VM_PFNMAP can contain anon pages from COW. There isn't
much profit in doing lookaround on them. Besides, they can trigger the
pte_special() warning in get_pte_pfn().
Skip them in lru_gen_look_around().
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 018ee47f1489 ("mm: multi-gen LRU: exploit locality in rmap")
Signed-off-by: Yu Zhao <[email protected]>
Reported-by: [email protected]
Closes: https://lore.kernel.org/[email protected]/
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Miaohe Lin has contributed to hwpoison subsystem as a reviewer for more
than 1.5 year, and has made many patch contributions in hwpoison subsystem
and the memory management subsystem. So I'd like to pass on the hwpoison
maintainership to Miaohe.
[[email protected]: update to keep myself as a reviewer]
Link: https://lkml.kernel.org/r/20231223031115.GA2883156@u2004
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Naoya Horiguchi <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
I am stepping away from my role as hugetlb maintainer. There should be no
gap in coverage as Muchun Song is also a hugetlb maintainer.
[[email protected]: update CREDITS]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The bug happens when highest bit of holebegin is 1, suppose holebegin is
0x8000000111111000, after shift, hba would be 0xfff8000000111111, then
vma_interval_tree_foreach would look it up fail or leads to the wrong
result.
error call seq e.g.:
- mmap(..., offset=0x8000000111111000)
|- syscall(mmap, ... unsigned long, off):
|- ksys_mmap_pgoff( ... , off >> PAGE_SHIFT);
here pgoff is correctly shifted to 0x8000000111111,
but pass 0x8000000111111000 as holebegin to unmap
would then cause terrible result, as shown below:
- unmap_mapping_range(..., loff_t const holebegin)
|- pgoff_t hba = holebegin >> PAGE_SHIFT;
/* hba = 0xfff8000000111111 unexpectedly */
The issue happens in Heterogeneous computing, where the device(e.g.
gpu) and host share the same virtual address space.
A simple workflow pattern which hit the issue is:
/* host */
1. userspace first mmap a file backed VA range with specified offset.
e.g. (offset=0x800..., mmap return: va_a)
2. write some data to the corresponding sys page
e.g. (va_a = 0xAABB)
/* device */
3. gpu workload touches VA, triggers gpu fault and notify the host.
/* host */
4. reviced gpu fault notification, then it will:
4.1 unmap host pages and also takes care of cpu tlb
(use unmap_mapping_range with offset=0x800...)
4.2 migrate sys page to device
4.3 setup device page table and resolve device fault.
/* device */
5. gpu workload continued, it accessed va_a and got 0xAABB.
6. gpu workload continued, it wrote 0xBBCC to va_a.
/* host */
7. userspace access va_a, as expected, it will:
7.1 trigger cpu vm fault.
7.2 driver handling fault to migrate gpu local page to host.
8. userspace then could correctly get 0xBBCC from va_a
9. done
But in step 4.1, if we hit the bug this patch mentioned, then userspace
would never trigger cpu fault, and still get the old value: 0xAABB.
Making holebegin unsigned first fixes the bug.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiajun Xie <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When running autonuma with enabling multi-size THP, I encountered the
following kernel crash issue:
[ 134.290216] list_del corruption. prev->next should be fffff9ad42e1c490,
but was dead000000000100. (prev=fffff9ad42399890)
[ 134.290877] kernel BUG at lib/list_debug.c:62!
[ 134.291052] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 134.291210] CPU: 56 PID: 8037 Comm: numa01 Kdump: loaded Tainted:
G E 6.7.0-rc4+ #20
[ 134.291649] RIP: 0010:__list_del_entry_valid_or_report+0x97/0xb0
......
[ 134.294252] Call Trace:
[ 134.294362] <TASK>
[ 134.294440] ? die+0x33/0x90
[ 134.294561] ? do_trap+0xe0/0x110
......
[ 134.295681] ? __list_del_entry_valid_or_report+0x97/0xb0
[ 134.295842] folio_undo_large_rmappable+0x99/0x100
[ 134.296003] destroy_large_folio+0x68/0x70
[ 134.296172] migrate_folio_move+0x12e/0x260
[ 134.296264] ? __pfx_remove_migration_pte+0x10/0x10
[ 134.296389] migrate_pages_batch+0x495/0x6b0
[ 134.296523] migrate_pages+0x1d0/0x500
[ 134.296646] ? __pfx_alloc_misplaced_dst_folio+0x10/0x10
[ 134.296799] migrate_misplaced_folio+0x12d/0x2b0
[ 134.296953] do_numa_page+0x1f4/0x570
[ 134.297121] __handle_mm_fault+0x2b0/0x6c0
[ 134.297254] handle_mm_fault+0x107/0x270
[ 134.300897] do_user_addr_fault+0x167/0x680
[ 134.304561] exc_page_fault+0x65/0x140
[ 134.307919] asm_exc_page_fault+0x22/0x30
The reason for the crash is that, the commit 85ce2c517ade ("memcontrol:
only transfer the memcg data for migration") removed the charging and
uncharging operations of the migration folios and cleared the memcg data
of the old folio.
During the subsequent release process of the old large folio in
destroy_large_folio(), if the large folio needs to be removed from the
split queue, an incorrect split queue can be obtained (which is
pgdat->deferred_split_queue) because the old folio's memcg is NULL now.
This can lead to list operations being performed under the wrong split
queue lock protection, resulting in a list crash as above.
After the migration, the old folio is going to be freed, so we can remove
it from the split queue in mem_cgroup_migrate() a bit earlier before
clearing the memcg data to avoid getting incorrect split queue.
[[email protected]: fix comment, per Zi Yan]
Link: https://lkml.kernel.org/r/61273e5e9b490682388377c20f52d19de4a80460.1703054559.git.baolin.wang@linux.alibaba.com
Fixes: 85ce2c517ade ("memcontrol: only transfer the memcg data for migration")
Signed-off-by: Baolin Wang <[email protected]>
Reviewed-by: Nhat Pham <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Reviewed-by: Zi Yan <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Since now bdi->max_ratio is part per million, fix the wrong arithmetic for
max_prop_frac when setting max_ratio. Otherwise the miscalculated
max_prop_frac will affect the incrementing of writeout completion count
when max_ratio is not 100%.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: efc3e6ad53ea ("mm: split off __bdi_set_max_ratio() function")
Signed-off-by: Jingbo Xu <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Stefan Roesch <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Since now bdi->min_ratio is part per million, fix the wrong arithmetic.
Otherwise it will fail with -EINVAL when setting a reasonable min_ratio,
as it tries to set min_ratio to (min_ratio * BDI_RATIO_SCALE) in
percentage unit, which exceeds 100% anyway.
# cat /sys/class/bdi/253\:0/min_ratio
0
# cat /sys/class/bdi/253\:0/max_ratio
100
# echo 1 > /sys/class/bdi/253\:0/min_ratio
-bash: echo: write error: Invalid argument
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 8021fb3232f2 ("mm: split off __bdi_set_min_ratio() function")
Signed-off-by: Jingbo Xu <[email protected]>
Reported-by: Joseph Qi <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Stefan Roesch <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Align larger anonymous memory mappings on THP boundaries by going through
thp_get_unmapped_area if THPs are enabled for the current process.
With this patch, larger anonymous mappings are now THP aligned. When a
malloc library allocates a 2MB or larger arena, that arena can now be
mapped with THPs right from the start, which can result in better TLB hit
rates and execution time.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Rik van Riel <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christopher Lameter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero.
Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets`
would try to read the register at offset zero when trying to get the power
status of this widget, which is incorrect.
Fixes: b65c466220b3 ("ASoC: mediatek: mt8186: support adda in platform driver")
Signed-off-by: Eugen Hristev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
parse_server_interfaces should be in complete charge of maintaining
the iface_list linked list. Today, iface entries are removed
from the list only when the last refcount is dropped.
i.e. in release_iface. However, this can result in undercounting
of refcount if the server stops advertising interfaces (which
Azure SMB server does).
This change puts parse_server_interfaces in full charge of
maintaining the iface_list. So if an empty list is returned
by the server, the entries in the list will immediately be
removed. This way, a following call to the same function will
not find entries in the list.
Fixes: aa45dadd34e4 ("cifs: change iface_list from array to sorted linked list")
Cc: [email protected]
Signed-off-by: Shyam Prasad N <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
cifs_chan_is_iface_active checks the channels of a session to see
if the associated iface is active. This should always happen
with chan_lock held. However, these two callers of this function
were missing this locking.
This change makes sure the function calls are protected with
proper locking.
Fixes: b54034a73baf ("cifs: during reconnect, update interface if necessary")
Fixes: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Cc: [email protected]
Signed-off-by: Shyam Prasad N <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Once the server disables multichannel for an active multichannel
session, on the following reconnect, the client would reduce
the number of channels to 1. However, it could be the case that
the tree connect was active on one of these disabled channels.
This results in an unrecoverable state.
This change fixes that by making sure that whenever a channel
is being terminated, the session and tcon are marked for
reconnect too. This could mean a few redundant tree connect
calls to the server, but considering that this is not a frequent
event, we should be okay.
Fixes: ee1d21794e55 ("cifs: handle when server stops supporting multichannel")
Signed-off-by: Shyam Prasad N <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Add missing conversion from little-endian data to CPU-endian in
scarlett2_usb_get_meter_levels().
Fixes: 3473185f31df ("ALSA: scarlett2: Remap Level Meter values")
Signed-off-by: Geoffrey D. Bennett <[email protected]>
Link: https://lore.kernel.org/r/ZYsBIE3DSKdi4YC/@m.b4.vu
Signed-off-by: Takashi Iwai <[email protected]>
|
|
If an application blocks on the snapshot or snapshot_raw files, expecting
to be woken up when a snapshot occurs, it will not happen. Or it may
happen with an unexpected result.
That result is that the application will be reading the main buffer
instead of the snapshot buffer. That is because when the snapshot occurs,
the main and snapshot buffers are swapped. But the reader has a descriptor
still pointing to the buffer that it originally connected to.
This is fine for the main buffer readers, as they may be blocked waiting
for a watermark to be hit, and when a snapshot occurs, the data that the
main readers want is now on the snapshot buffer.
But for waiters of the snapshot buffer, they are waiting for an event to
occur that will trigger the snapshot and they can then consume it quickly
to save the snapshot before the next snapshot occurs. But to do this, they
need to read the new snapshot buffer, not the old one that is now
receiving new data.
Also, it does not make sense to have a watermark "buffer_percent" on the
snapshot buffer, as the snapshot buffer is static and does not receive new
data except all at once.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Mathieu Desnoyers <[email protected]>
Cc: Mark Rutland <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Fixes: debdd57f5145f ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The tracefs file "buffer_percent" is to allow user space to set a
water-mark on how much of the tracing ring buffer needs to be filled in
order to wake up a blocked reader.
0 - is to wait until any data is in the buffer
1 - is to wait for 1% of the sub buffers to be filled
50 - would be half of the sub buffers are filled with data
100 - is not to wake the waiter until the ring buffer is completely full
Unfortunately the test for being full was:
dirty = ring_buffer_nr_dirty_pages(buffer, cpu);
return (dirty * 100) > (full * nr_pages);
Where "full" is the value for "buffer_percent".
There is two issues with the above when full == 100.
1. dirty * 100 > 100 * nr_pages will never be true
That is, the above is basically saying that if the user sets
buffer_percent to 100, more pages need to be dirty than exist in the
ring buffer!
2. The page that the writer is on is never considered dirty, as dirty
pages are only those that are full. When the writer goes to a new
sub-buffer, it clears the contents of that sub-buffer.
That is, even if the check was ">=" it would still not be equal as the
most pages that can be considered "dirty" is nr_pages - 1.
To fix this, add one to dirty and use ">=" in the compare.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Fixes: 03329f9939781 ("tracing: Add tracefs file buffer_percentage")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added at probe. This was needed in order to allow the
SoC to enter the deepest Package C state. To fix the regression and at
least support PC10 during suspend, move the LTR ignore from probe to the
suspend callback, and enable it again on resume. This solution will allow
PC10 during suspend but restrict Package C entry at runtime to no deeper
than PC8/9 while a network cable it attach to the PCH LAN.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added during probe. The fix will move the ignore to
occur at suspend-time (so as to not affect suspend power). This will
require the ability to enable the LTR again on resume. Modify
pmc_core_send_ltr_ignore() to allow enabling an LTR.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Add a suspend callback to struct pmc for performing platform specific tasks
before device suspend. This is needed in order to perform GBE LTR ignore on
certain platforms at suspend-time instead of at probe-time and replace the
GBE LTR ignore removal that was done in order to fix a bug introduced by
commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()").
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Suggested-by: Andy Shevchenko <[email protected]>
Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: [email protected]
Signed-off-by: Shin'ichiro Kawasaki <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ilpo Järvinen <[email protected]>
|