aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-04Merge tag 'for-5.6/dm-fixes' of ↵Linus Torvalds10-69/+94
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix request-based DM's congestion_fn and actually wire it up to the bdi. - Extend dm-bio-record to track additional struct bio members needed by DM integrity target. - Fix DM core to properly advertise that a device is suspended during unload (between the presuspend and postsuspend hooks). This change is a prereq for related DM integrity and DM writecache fixes. It elevates DM integrity's 'suspending' state tracking to DM core. - Four stable fixes for DM integrity target. - Fix crash in DM cache target due to incorrect work item cancelling. - Fix DM thin metadata lockdep warning that was introduced during 5.6 merge window. - Fix DM zoned target's chunk work refcounting that regressed during recent conversion to refcount_t. - Bump the minor version for DM core and all target versions that have seen interface changes or important fixes during the 5.6 cycle. * tag 'for-5.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: bump version of core and various targets dm: fix congested_fn for request-based device dm integrity: use dm_bio_record and dm_bio_restore dm bio record: save/restore bi_end_io and bi_integrity dm zoned: Fix reference counter initial value of chunk works dm writecache: verify watermark during resume dm: report suspended device during destroy dm thin metadata: fix lockdep complaint dm cache: fix a crash due to incorrect work item cancelling dm integrity: fix invalid table returned due to argument count mismatch dm integrity: fix a deadlock due to offloading to an incorrect workqueue dm integrity: fix recalculation when moving from journal mode to bitmap mode
2020-03-04riscv: Force flat memory model with no-mmuDamien Le Moal1-0/+1
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for a nommu kernel. Since the sparsemem model does not make sense anyway for the nommu case, do not allow selecting this option to always use the flatmem model. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Anup Patel <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-04RDMA/iwcm: Fix iwcm work deallocationBernard Metzler1-1/+3
The dealloc_work_entries() function must update the work_free_list pointer while freeing its entries, since potentially called again on same list. A second iteration of the work list caused system crash. This happens, if work allocation fails during cma_iw_listen() and free_cm_id() tries to free the list again during cleanup. Fixes: 922a8e9fb2e0 ("RDMA: iWARP Connection Manager.") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Signed-off-by: Bernard Metzler <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/siw: Fix failure handling during device creationBernard Metzler1-3/+3
A failing call to ib_device_set_netdev() during device creation caused system crash due to xa_destroy of uninitialized xarray hit by device deallocation. Fixed by moving xarray initialization before potential device deallocation. Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Signed-off-by: Bernard Metzler <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missingMark Zhang1-0/+2
This fixes the kernel crash when a RDMA_NLDEV_CMD_STAT_SET command is received, but the QP number parameter is not available. iwpm_register_pid: Unable to send a nlmsg (client = 2) infiniband syz1: RDMA CMA: cma_listen_on_dev, error -98 general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 9754 Comm: syz-executor069 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nla_get_u32 include/net/netlink.h:1474 [inline] RIP: 0010:nldev_stat_set_doit+0x63c/0xb70 drivers/infiniband/core/nldev.c:1760 Code: fc 01 0f 84 58 03 00 00 e8 41 83 bf fb 4c 8b a3 58 fd ff ff 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 6d RSP: 0018:ffffc900068bf350 EFLAGS: 00010247 RAX: dffffc0000000000 RBX: ffffc900068bf728 RCX: ffffffff85b60470 RDX: 0000000000000000 RSI: ffffffff85b6047f RDI: 0000000000000004 RBP: ffffc900068bf750 R08: ffff88808c3ee140 R09: ffff8880a25e6010 R10: ffffed10144bcddc R11: ffff8880a25e6ee3 R12: 0000000000000000 R13: ffff88809acb0000 R14: ffff888092a42c80 R15: 000000009ef2e29a FS: 0000000001ff0880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4733e34000 CR3: 00000000a9b27000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline] rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc0efbc5c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004 RBP: 00000000006ca018 R08: 0000000000000008 R09: 00000000004002c8 R10: 000000000000004a R11: 0000000000000246 R12: 0000000000401c60 R13: 0000000000401cf0 R14: 0000000000000000 R15: 0000000000000000 Fixes: b389327df905 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Signed-off-by: Mark Zhang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/odp: Ensure the mm is still alive before creating an implicit childJason Gunthorpe1-5/+19
Registration of a mmu_notifier requires the caller to hold a mmget() on the mm as registration is not permitted to race with exit_mmap(). There is a BUG_ON inside the mmu_notifier to guard against this. Normally creating a umem is done against current which implicitly holds the mmget(), however an implicit ODP child is created from a pagefault work queue and is not guaranteed to have a mmget(). Call mmget() around this registration and abort faulting if the MM has gone to exit_mmap(). Before the patch below the notifier was registered when the implicit ODP parent was created, so there was no chance to register a notifier outside of current. Fixes: c571feca2dc9 ("RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/core: Fix protection fault in ib_mr_pool_destroyMaor Gottlieb3-19/+14
Fix NULL pointer dereference in the error flow of ib_create_qp_user when accessing to uninitialized list pointers - rdma_mrs and sig_mrs. The following crash from syzkaller revealed it. kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 23167 Comm: syz-executor.1 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_mr_pool_destroy+0x81/0x1f0 Code: 00 00 fc ff df 49 c1 ec 03 4d 01 fc e8 a8 ea 72 fe 41 80 3c 24 00 0f 85 62 01 00 00 48 8b 13 48 89 d6 4c 8d 6a c8 48 c1 ee 03 <42> 80 3c 3e 00 0f 85 34 01 00 00 48 8d 7a 08 4c 8b 02 48 89 fe 48 RSP: 0018:ffffc9000951f8b0 EFLAGS: 00010046 RAX: 0000000000040000 RBX: ffff88810f268038 RCX: ffffffff82c41628 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffc9000951f850 RBP: ffff88810f268020 R08: 0000000000000004 R09: fffff520012a3f0a R10: 0000000000000001 R11: fffff520012a3f0a R12: ffffed1021e4d007 R13: ffffffffffffffc8 R14: 0000000000000246 R15: dffffc0000000000 FS: 00007f54bc788700(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000116920002 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rdma_rw_cleanup_mrs+0x15/0x30 ib_destroy_qp_user+0x674/0x7d0 ib_create_qp_user+0xb01/0x11c0 create_qp+0x1517/0x2130 ib_uverbs_create_qp+0x13e/0x190 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465b49 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f54bc787c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000465b49 RDX: 0000000000000040 RSI: 0000000020000540 RDI: 0000000000000003 RBP: 00007f54bc787c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f54bc7886bc R13: 00000000004ca2ec R14: 000000000070ded0 R15: 0000000000000005 Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04IB/mlx5: Fix implicit ODP raceArtemy Kovalyov2-10/+8
Following race may occur because of the call_srcu and the placement of the synchronize_srcu vs the xa_erase. CPU0 CPU1 mlx5_ib_free_implicit_mr: destroy_unused_implicit_child_mr: xa_erase(odp_mkeys) synchronize_srcu() xa_lock(implicit_children) if (still in xarray) atomic_inc() call_srcu() xa_unlock(implicit_children) xa_erase(implicit_children): xa_lock(implicit_children) __xa_erase() xa_unlock(implicit_children) flush_workqueue() [..] free_implicit_child_mr_rcu: (via call_srcu) queue_work() WARN_ON(atomic_read()) [..] free_implicit_child_mr_work: (via wq) free_implicit_child_mr() mlx5_mr_cache_invalidate() mlx5_ib_update_xlt() <-- UMR QP fail atomic_dec() The wait_event() solves the race because it blocks until free_implicit_child_mr_work() completes. Fixes: 5256edcb98a1 ("RDMA/mlx5: Rework implicit ODP destroy") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Artemy Kovalyov <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04dt-bindings: power: Convert domain-idle-states bindings to json-schemaUlf Hansson5-47/+76
While converting to the json-schema, let's also take the opportunity to further specify/clarify some more details about the DT binding. For example, let's define the label where to put the states nodes, set a pattern for nodename of the state nodes and finally add an example. Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <[email protected]> [robh: drop type refs from standard unit properties] Signed-off-by: Rob Herring <[email protected]>
2020-03-04dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCIUlf Hansson1-2/+2
Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-03-04dt-bindings: arm: Correct links to idle states definitionsUlf Hansson1-1/+1
The arm,idle-state DT bindings recently got converted to the json-schema, but some links are still pointing to the old, non-existing, txt file. Let's update the links to fix this. Fixes: baac82fe06db ("dt-bindings: arm: Convert arm,idle-state binding to DT schema") Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-03-04spi: spi_register_controller(): free bus id on error pathsAaro Koskinen1-17/+15
Some error paths leave the bus id allocated. As a result the IDR allocation will fail after a deferred probe. Fix by freeing the bus id always on error. Signed-off-by: Aaro Koskinen <[email protected]> Message-Id: <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2020-03-04regulator: stm32-vrefbuf: fix a possible overshoot when re-enablingFabrice Gasnier1-1/+2
There maybe an overshoot, when disabling, then re-enabling vrefbuf too quickly. VREFBUF is used by ADC/DAC on some boards. When re-enabling too quickly, an overshoot on the reference voltage make the conversions inaccurate for a short period of time. - Don't put the VREFBUF in HiZ when disabling, to force an active discharge. - Enforce a 1ms OFF/ON delay Fixes: 0cdbf481e927 ("regulator: Add support for stm32-vrefbuf") Signed-off-by: Fabrice Gasnier <[email protected]> Message-Id: <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2020-03-04drm: kirin: Revert "Fix for hikey620 display offset problem"John Stultz2-21/+0
This reverts commit ff57c6513820efe945b61863cf4a51b79f18b592. With the commit ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") we added support for handling LDI overflows by resetting the hardware. However, its been observed that when we do hit the LDI overflow condition, the irq seems to be screaming, and we do nothing but stream: [drm:ade_irq_handler [kirin_drm]] *ERROR* LDI underflow! over and over to the screen I've tried a few appraoches to avoid this, but none has yet been successful and the cure here is worse then the original disease, so revert this for now. Cc: Xinliang Liu <[email protected]> Cc: Rongrong Zou <[email protected]> Cc: Xinwei Kong <[email protected]> Cc: Chen Feng <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: dri-devel <[email protected]> Fixes: ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") Signed-off-by: John Stultz <[email protected]> Acked-by: Xinliang Liu <[email protected]> Signed-off-by: Xinliang Liu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-04ASoC: stm32: sai: manage rebind issueOlivier Moysan1-8/+10
The commit e894efef9ac7 ("ASoC: core: add support to card rebind") allows to rebind the sound card after a rebind of one of its component. With this commit, the sound card is actually rebound, but may be no more functional. The following problems have been seen with STM32 SAI driver. 1) DMA channel is not requested: With the sound card rebind the simplified call sequence is: stm32_sai_sub_probe snd_soc_register_component snd_soc_try_rebind_card snd_soc_instantiate_card devm_snd_dmaengine_pcm_register The problem occurs because the pcm must be registered, before snd_soc_instantiate_card() is called. Modify SAI driver, to change the call sequence as follows: stm32_sai_sub_probe devm_snd_dmaengine_pcm_register snd_soc_register_component snd_soc_try_rebind_card 2) DMA channel is not released: dma_release_channel() is not called when devm_dmaengine_pcm_release() is executed. This occurs because SND_DMAENGINE_PCM_DRV_NAME component, has already been released through devm_component_release(). devm_dmaengine_pcm_release() should be called before devm_component_release() to avoid this problem. Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component() explicitly from SAI driver, to have the right sequence. Signed-off-by: Olivier Moysan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2020-03-04drm/i915/gt: Drop the timeline->mutex as we wait for retirementChris Wilson1-3/+11
As we have pinned the timeline (using tl->active_count), we can safely drop the tl->mutex as we wait for what we believe to be the final request on that timeline. This is useful for ensuring that we do not block the engine heartbeat by hogging the kernel_context's timeline on a dead GPU. References: https://gitlab.freedesktop.org/drm/intel/issues/1364 Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats") Fixes: f33a8a51602c ("drm/i915: Merge wait_for_timelines with retire_request") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 82126e596d8519baac416aee83cad938f1d23cf8) Signed-off-by: Jani Nikula <[email protected]>
2020-03-04drm/i915/perf: Reintroduce wait on OA configuration completionChris Wilson2-18/+43
We still need to wait for the initial OA configuration to happen before we enable OA report writes to the OA buffer. Reported-by: Lionel Landwerlin <[email protected]> Fixes: 15d0ace1f876 ("drm/i915/perf: execute OA configuration from command stream") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1356 Testcase: igt/perf/stream-open-close Signed-off-by: Chris Wilson <[email protected]> Cc: Lionel Landwerlin <[email protected]> Reviewed-by: Lionel Landwerlin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4b4e973d5eb89244b67d3223b60f752d0479f253) Signed-off-by: Jani Nikula <[email protected]>
2020-03-04s390/pci: Fix unexpected write combine on resourceNiklas Schnelle1-2/+2
In the initial MIO support introduced in commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") zpci_map_resource() and zpci_setup_resources() default to using the mio_wb address as the resource's start address. This means users of the mapping, which includes most drivers, will get write combining on PCI Stores. This may lead to problems when drivers expect write through behavior when not using an explicit ioremap_wc(). Cc: [email protected] Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <[email protected]> Reviewed-by: Pierre Morel <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-03-04s390/mm: fix panic in gup_fast on large pudGerald Schaefer1-0/+6
On s390 there currently is no implementation of pud_write(). That was ok as long as we had our own implementation of get_user_pages_fast() which checked for pud protection by testing the bit directly w/o using pud_write(). The other callers of pud_write() are not reachable on s390. After commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") we use the generic get_user_pages_fast(), which does call pud_write() in pud_access_permitted() for FOLL_WRITE access on a large pud. Without an s390 specific pud_write(), the generic version is called, which contains a BUG() statement to remind us that we don't have a proper implementation. This results in a kernel panic. Fix this by providing an implementation of pud_write(). Cc: <[email protected]> # 5.2+ Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Gerald Schaefer <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-03-03Merge tag '5.6-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds11-20/+44
Pull cifs fixes from Steve French: "Five small cifs/smb3 fixes, two for stable (one for a reconnect problem and the other fixes a use case when renaming an open file)" * tag '5.6-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Use #define in cifs_dbg cifs: fix rename() by ensuring source handle opened with DELETE bit cifs: add missing mount option to /proc/mounts cifs: fix potential mismatch of UNC paths cifs: don't leak -EAGAIN for stat() during reconnect
2020-03-03dt-bindings: mfd: Fix typo in file name of twl-familly.txtJonathan Neuschäfer2-1/+1
Signed-off-by: Jonathan Neuschäfer <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-03-03dt-bindings: mfd: tps65910: Improve grammarJonathan Neuschäfer1-2/+2
Signed-off-by: Jonathan Neuschäfer <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-03-03dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad")Jonathan Neuschäfer1-1/+1
Signed-off-by: Jonathan Neuschäfer <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-03-03drm/sun4i: Fix DE2 VI layer format supportJernej Skrabec2-11/+67
DE2 VI layer doesn't support blending which means alpha channel is ignored. Replace all formats with alpha with "don't care" (X) channel. Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes") Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-03drm/sun4i: Add separate DE3 VI layer formatsJernej Skrabec3-3/+102
DE3 VI layers support alpha blending, but DE2 VI layers do not. Additionally, DE3 VI layers support 10-bit RGB and YUV formats. Make a separate list for DE3. Fixes: c50519e6db4d ("drm/sun4i: Add basic support for DE3") Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-03drm/sun4i: de2/de3: Remove unsupported VI layer formatsJernej Skrabec2-14/+0
YUV444 and YVU444 are planar formats, but HW format RGB888 is packed. This means that those two mappings were never correct. Remove them. Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats") Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Jernej Skrabec <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-03hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()Dan Carpenter1-1/+1
This is only called from adt7462_update_device(). The caller expects it to return zero on error. I fixed a similar issue earlier in commit a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0") but I missed this one. Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2020-03-03riscv: Change code model of module to medany to improve data accessingVincent Chen1-2/+4
All the loaded module locates in the region [＆_end-2G，VMALLOC_END] at runtime, so the distance from the module start to the end of the kernel image does not exceed 2GB. Hence, the code model of the kernel module can be changed to medany to improve the performance data access. Signed-off-by: Vincent Chen <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-03riscv: avoid the PIC offset of static percpu data in module beyond 2G limitsVincent Chen1-0/+16
The compiler uses the PIC-relative method to access static variables instead of GOT when the code model is PIC. Therefore, the limitation of the access range from the instruction to the symbol address is +-2GB. Under this circumstance, the kernel cannot load a kernel module if this module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason is that kernel relocates the .data..percpu section of the kernel module to the end of kernel's .data..percpu. Hence, the distance between the per-CPU symbols and the instruction will exceed the 2GB limits. To solve this problem, the kernel should place the loaded module in the memory area [&_end-2G, VMALLOC_END]. Signed-off-by: Vincent Chen <[email protected]> Suggested-by: Alexandre Ghiti <[email protected]> Suggested-by: Anup Patel <[email protected]> Tested-by: Alexandre Ghiti <[email protected]> Tested-by: Carlos de Paula <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-03dm: bump version of core and various targetsMike Snitzer7-8/+8
Changes made during the 5.6 cycle warrant bumping the version number for DM core and the targets modified by this commit. It should be noted that dm-thin, dm-crypt and dm-raid already had their target version bumped during the 5.6 merge window. Signed-off-by; Mike Snitzer <[email protected]>
2020-03-03dm: fix congested_fn for request-based deviceHou Tao1-11/+10
We neither assign congested_fn for requested-based blk-mq device nor implement it correctly. So fix both. Also, remove incorrect comment from dm_init_normal_md_queue and rename it to dm_init_congested_fn. Fixes: 4aa9c692e052 ("bdi: separate out congested state into a separate struct") Cc: [email protected] Signed-off-by: Hou Tao <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-03-03fcntl: Distribute switch variables for initializationKees Cook1-2/+4
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. fs/fcntl.c: In function ‘send_sigio_to_task’: fs/fcntl.c:738:20: warning: statement will never be executed [-Wswitch-unreachable] 738 | kernel_siginfo_t si; | ^~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Jeff Layton <[email protected]>
2020-03-03dm integrity: use dm_bio_record and dm_bio_restoreMike Snitzer1-23/+9
In cases where dec_in_flight() has to requeue the integrity_bio_wait work to transfer the rest of the data, the bio's __bi_remaining might already have been decremented to 0, e.g.: if bio passed to underlying data device was split via blk_queue_split(). Use dm_bio_{record,restore} rather than effectively open-coding them in dm-integrity -- these methods now manage __bi_remaining too. Depends-on: f7f0b057a9c1 ("dm bio record: save/restore bi_end_io and bi_integrity") Reported-by: Daniel Glöckner <[email protected]> Suggested-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-03-03dm bio record: save/restore bi_end_io and bi_integrityMike Snitzer1-0/+15
Also, save/restore __bi_remaining in case the bio was used in a BIO_CHAIN (e.g. due to blk_queue_split). Suggested-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-03-03btrfs: fix RAID direct I/O reads with alternate csumsOmar Sandoval1-1/+3
btrfs_lookup_and_bind_dio_csum() does pointer arithmetic which assumes 32-bit checksums. If using a larger checksum, this leads to spurious failures when a direct I/O read crosses a stripe. This is easy to reproduce: # mkfs.btrfs -f --checksum blake2 -d raid0 /dev/vdc /dev/vdd ... # mount /dev/vdc /mnt # cd /mnt # dd if=/dev/urandom of=foo bs=1M count=1 status=none # dd if=foo of=/dev/null bs=1M iflag=direct status=none dd: error reading 'foo': Input/output error # dmesg | tail -1 [ 135.821568] BTRFS warning (device vdc): csum failed root 5 ino 257 off 421888 ... Fix it by using the actual checksum size. Fixes: 1e25a2e3ca0d ("btrfs: don't assume ordered sums to be 4 bytes") CC: [email protected] # 5.4+ Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-03-03ASoC: SOF: Fix snd_sof_ipc_stream_posn()Dan Carpenter1-1/+1
We're passing "&posn" instead of "posn" so it ends up corrupting memory instead of doing something useful. Fixes: 53e0c72d98ba ("ASoC: SOF: Add support for IPC IO between DSP and Host") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-03-03ASoC: rt1015: modify pre-divider for sysclkJack Yu1-1/+1
Modify pre-divider for system clock. Signed-off-by: Jack Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-03-03efi: Add embedded peripheral firmware supportHans de Goede6-0/+201
Just like with PCI options ROMs, which we save in the setup_efi_pci* functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself sometimes may contain data which is useful/necessary for peripheral drivers to have access to. Specifically the EFI code may contain an embedded copy of firmware which needs to be (re)loaded into the peripheral. Normally such firmware would be part of linux-firmware, but in some cases this is not feasible, for 2 reasons: 1) The firmware is customized for a specific use-case of the chipset / use with a specific hardware model, so we cannot have a single firmware file for the chipset. E.g. touchscreen controller firmwares are compiled specifically for the hardware model they are used with, as they are calibrated for a specific model digitizer. 2) Despite repeated attempts we have failed to get permission to redistribute the firmware. This is especially a problem with customized firmwares, these get created by the chip vendor for a specific ODM and the copyright may partially belong with the ODM, so the chip vendor cannot give a blanket permission to distribute these. This commit adds support for finding peripheral firmware embedded in the EFI code and makes the found firmware available through the new efi_get_embedded_fw() function. Support for loading these firmwares through the standard firmware loading mechanism is added in a follow-up commit in this patch-series. Note we check the EFI_BOOT_SERVICES_CODE for embedded firmware near the end of start_kernel(), just before calling rest_init(), this is on purpose because the typical EFI_BOOT_SERVICES_CODE memory-segment is too large for early_memremap(), so the check must be done after mm_init(). This relies on EFI_BOOT_SERVICES_CODE not being free-ed until efi_free_boot_services() is called, which means that this will only work on x86 for now. Reported-by: Dave Olsthoorn <[email protected]> Suggested-by: Peter Jones <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-03-03efi: Export boot-services code and data as debugfs-blobsHans de Goede4-0/+63
Sometimes it is useful to be able to dump the efi boot-services code and data. This commit adds these as debugfs-blobs to /sys/kernel/debug/efi, but only if efi=debug is passed on the kernel-commandline as this requires not freeing those memory-regions, which costs 20+ MB of RAM. Reviewed-by: Greg Kroah-Hartman <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]>
2020-03-02Revert "bcache: ignore pending signals when creating gc and allocator thread"Jens Axboe2-29/+2
This reverts commit 0b96da639a4874311e9b5156405f69ef9fc3bef8. We can't just go flushing random signals, under the assumption that the OOM killer will just do something else. It's not safe from the OOM perspective, and it could also cause other signals to get randomly lost. Signed-off-by: Jens Axboe <[email protected]>
2020-03-02dt-bindings: arm: fsl: fix APF6Dev compatibleSébastien Szymanski1-1/+1
APF6 Dev compatible is armadeus,imx6dl-apf6dev and not armadeus,imx6dl-apf6dldev. Fixes: 3d735471d066 ("dt-bindings: arm: Document Armadeus SoM and Dev boards devicetree binding") Signed-off-by: Sébastien Szymanski <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-03-02io-wq: remove io_wq_flush and IO_WQ_WORK_INTERNALPavel Begunkov2-39/+1
io_wq_flush() is buggy, during cancelation of a flush, the associated work may be passed to the caller's (i.e. io_uring) @match callback. That callback is expecting it to be embedded in struct io_kiocb. Cancelation of internal work probably doesn't make a lot of sense to begin with. As the flush helper is no longer used, just delete it and the associated work flag. Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-03-02selftest/lkdtm: Use local .gitignoreChristophe Leroy2-4/+2
Commit 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'") introduced patterns for git to ignore files generated in tools/testing/selftests/lkdtm/ Use local .gitignore file instead of using the root one. Fixes: 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'") Signed-off-by: Christophe Leroy <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-03-02IB/hfi1, qib: Ensure RCU is locked when accessing listDennis Dalessandro2-1/+5
The packet handling function, specifically the iteration of the qp list for mad packet processing misses locking RCU before running through the list. Not only is this incorrect, but the list_for_each_entry_rcu() call can not be called with a conditional check for lock dependency. Remedy this by invoking the rcu lock and unlock around the critical section. This brings MAD packet processing in line with what is done for non-MAD packets. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-02spi: bcm63xx-hsspi: Really keep pll clk enabledChristophe JAILLET1-1/+0
The purpose of commit 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled") was to keep the pll clk enabled through the lifetime of the device. In order to do that, some 'clk_prepare_enable()'/'clk_disable_unprepare()' calls have been added in the error handling path of the probe function, in the remove function and in the suspend and resume functions. However, a 'clk_disable_unprepare()' call has been unfortunately left in the probe function. So the commit seems to be more or less a no-op. Axe it now, so that the pll clk is left enabled through the lifetime of the device, as described in the commit. Fixes: 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Jonas Gorski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-03-02io-wq: fix IO_WQ_WORK_NO_CANCEL cancellationPavel Begunkov1-6/+14
To cancel a work, io-wq sets IO_WQ_WORK_CANCEL and executes the callback. However, IO_WQ_WORK_NO_CANCEL works will just execute and may return next work, which will be ignored and lost. Cancel the whole link. Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-03-02block: Remove used kblockd_schedule_work_on()Daniel Wagner2-7/+0
Commit ee63cfa7fc19 ("block: add kblockd_schedule_work_on()") introduced the helper in 2016. Remove it because since then no caller was added. Cc: Jens Axboe <[email protected]> Signed-off-by: Daniel Wagner <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-03-02ASoC: rt1015: add operation callback function for rt1015_dai[]Jack Yu1-0/+1
Add operation callback function for rt1015_dai[]. Signed-off-by: Jack Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-03-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds8-9/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a pkeys fix for a bug that triggers with weird BIOS settings, and two Xen PV fixes: a paravirt interface fix, and pagetable dumping fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix dump_pagetables with Xen PV x86/ioperm: Add new paravirt function update_io_bitmap() x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changes
2020-03-02Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a scheduler statistics bug" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix statistics for find_idlest_group()
Powered by cgit, Gruvboxed by Blaster4385.