aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-01-06drm/radeon/kms: adjust quirk for acer laptopAlex Deucher1-10/+11
Acer laptop (TravelMate 5730G) has an HDMI connector on the laptop and a DVI connector on the docking station and both share the same encoder, hpd pin, and ddc line. The bios connector table reflects this and is technically correct, however, we drop the DVI connector here since xrandr has no concept of encoders (only crtcs and connectors) and will try and drive both connectors with different crtcs which isn't possible on the hardware side and leaves no crtcs for LVDS or VGA. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=32732 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-01-05vga_switcheroo: split switching into two stages.Dave Airlie1-11/+34
stage 1: turn card on, switch boot vga pointer. stage 2: switch fbs, switch mux and power off old card. Signed-off-by: Dave Airlie <[email protected]>
2011-01-05drm/switcheroo: track state of switch in drivers.Dave Airlie10-13/+40
We need to track the state of the switch in drivers, so that after s/r we don't resume the card we've explicitly switched off before. Also don't allow a userspace open to occur if we've switched the gpu off. Signed-off-by: Dave Airlie <[email protected]>
2011-01-05vga_switcheroo: add reprobe hook for fbcon to recheck connected outputs.Dave Airlie5-0/+16
This adds a hook after the mux is switched for the driver to reprobe the connected outputs. Signed-off-by: Dave Airlie <[email protected]>
2011-01-05nouveau/acpi: improve detection of what is IGD and what is DIS.Dave Airlie1-3/+8
This improves the IGD/DIS picking using firstly if Intel, then if the bus is bus 0. There may be a correct way to do this, but I've no idea what it is. Signed-off-by: Dave Airlie <[email protected]>
2011-01-05drm/nouveau: add delayed switch complete callback.Dave Airlie1-0/+1
this just adds the callback on the delayed switch mechanism. Signed-off-by: Dave Airlie <[email protected]>
2011-01-05vga_switcheroo: add debugging mux switch option.Dave Airlie1-0/+16
This allows the mux to be switched from userspace using MIGD/MDIS command to the switch. Signed-off-by: Dave Airlie <[email protected]>
2011-01-05vga_switcheroo: make power switch handler optionalDave Airlie1-4/+4
At least on the nvidia mux the power switch seems to be executed by the ACPI PS0/PS3 methods so need to do it explicitly. Signed-off-by: Dave Airlie <[email protected]>
2011-01-05vga_switcheroo: print the IGD/DIS flag in the debugfs output.Dave Airlie1-1/+2
We really want to see this so we can confirm that we pick the right one. Signed-off-by: Dave Airlie <[email protected]>
2011-01-05drm/radeon/kms: implement gpu lockup check for evergreenAlex Deucher2-2/+25
Now that soft reset works, we can add this. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-01-05Merge branch 'master' of /home/airlied/kernel/linux-2.6 into drm-core-nextDave Airlie656-4634/+6373
2011-01-03Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds14-157/+78
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: pxa: fix page table corruption on resume ARM: it8152: add IT8152_LAST_IRQ definition to fix build error ARM: pxa: PXA_ESERIES depends on FB_W100. ARM: 6605/1: Add missing include "asm/memory.h" ARM: 6540/1: Stop irqsoff trace on return to user ARM: 6537/1: update Nomadik, U300 and Ux500 maintainers ARM: 6536/1: Add missing SZ_{32,64,128} ARM: fix cache-feroceon-l2 after stack based kmap_atomic() ARM: fix cache-xsc3l2 after stack based kmap_atomic() ARM: get rid of kmap_high_l1_vipt() ARM: smp: avoid incrementing mm_users on CPU startup ARM: pxa: PXA_ESERIES depends on FB_W100.
2011-01-03arch/mn10300/kernel/irq.c: fix buildAndrew Morton1-1/+1
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=25702 Reported-by: Martin Ettl <[email protected]> Cc: David Howells <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-01-03ima: fix add LSM rule bugMimi Zohar1-0/+2
If security_filter_rule_init() doesn't return a rule, then not everything is as fine as the return code implies. This bug only occurs when the LSM (eg. SELinux) is disabled at runtime. Adding an empty LSM rule causes ima_match_rules() to always succeed, ignoring any remaining rules. default IMA TCB policy: # PROC_SUPER_MAGIC dont_measure fsmagic=0x9fa0 # SYSFS_MAGIC dont_measure fsmagic=0x62656572 # DEBUGFS_MAGIC dont_measure fsmagic=0x64626720 # TMPFS_MAGIC dont_measure fsmagic=0x01021994 # SECURITYFS_MAGIC dont_measure fsmagic=0x73636673 < LSM specific rule > dont_measure obj_type=var_log_t measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC measure func=FILE_CHECK mask=MAY_READ uid=0 Thus without the patch, with the boot parameters 'tcb selinux=0', adding the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB measurement policy, would result in nothing being measured. The patch prevents the default TCB policy from being replaced. Signed-off-by: Mimi Zohar <[email protected]> Cc: James Morris <[email protected]> Acked-by: Serge Hallyn <[email protected]> Cc: David Safford <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-01-03Merge branch 'fix' of ↵Russell King259-1598/+2484
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2011-01-03Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds4-11/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix callchain hit bad cast on ascii display arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPU watchdog: Improve initialisation error message and documentation
2011-01-03Merge branch 'v4l_for_linus' of ↵Linus Torvalds8-188/+79
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] em28xx: radio_fops should also use unlocked_ioctl [media] wm8775: Revert changeset fcb9757333 to avoid a regression [media] cx25840: Prevent device probe failure due to volume control ERANGE error
2011-01-03Merge branch 'fixes' of ↵Linus Torvalds2-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: provide dummy functions for DMA_ENGINE=n mv_xor: fix race in tasklet function
2011-01-03name_to_dev_t() must not call __init codeJan Beulich1-1/+1
The function can't be __init itself (being called from some sysfs handler), and hence none of the functions it calls can be either. Signed-off-by: Jan Beulich <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-01-03Merge branch 'perf/urgent' of ↵Ingo Molnar1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent
2011-01-03ARM: pxa: fix page table corruption on resumeAric D. Blumer1-2/+2
Before this patch, the following error would sometimes occur after a resume on pxa3xx: /path/to/mm/memory.c:144: bad pmd 8040542e. The problem was that a temporary page table mapping was being improperly restored. The PXA3xx resume code creates a temporary mapping of resume_turn_on_mmu to avoid a prefetch abort. The pxa3xx_resume_after_mmu code requires that the r1 register holding the address of this mapping not be modified, however, resume_turn_on_mmu does modify it. It is mostly correct in that r1 receives the base table address, but it may also get other bits in 13:0. This results in pxa3xx_resume_after_mmu restoring the original mapping to the wrong place, corrupting memory and leaving the temporary mapping in place. Signed-off-by: Matt Reimer <[email protected]> Signed-off-by: Eric Miao <[email protected]>
2011-01-03ARM: it8152: add IT8152_LAST_IRQ definition to fix build errorMike Rapoport1-0/+1
The commit 6ac6b817f3f4c23c5febd960d8deb343e13af5f3 (ARM: pxa: encode IRQ number into .nr_irqs) removed definition of ITE_LAST_IRQ which caused the following build error: CC arch/arm/common/it8152.o arch/arm/common/it8152.c: In function 'it8152_init_irq': arch/arm/common/it8152.c:86: error: 'IT8152_LAST_IRQ' undeclared (first use in this function) arch/arm/common/it8152.c:86: error: (Each undeclared identifier is reported only once arch/arm/common/it8152.c:86: error: for each function it appears in.) make[2]: *** [arch/arm/common/it8152.o] Error 1 Defining the IT8152_LAST_IRQ in the arch/arm/include/hardware/it8152.c fixes the build. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Eric Miao <[email protected]>
2011-01-03ARM: pxa: PXA_ESERIES depends on FB_W100.Lennert Buytenhek1-0/+1
As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}() directly. Signed-off-by: Lennert Buytenhek <[email protected]> Signed-off-by: Eric Miao <[email protected]>
2011-01-03perf: Fix callchain hit bad cast on ascii displayFrederic Weisbecker1-1/+1
ipchain__fprintf_graph() casts the number of hits in a branch as an int, which means we lose its highests bits. This results in meaningless number of callchain hits in perf.data that have a high number of hits recorded, typically those that have callchain branches hits appearing more than INT_MAX. This happens easily as those are pondered by the event period. Reported-by: Nick Piggin <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Paul Mackerras <[email protected]>
2011-01-03arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPURobert Richter1-8/+16
Disable preemption in init_ibs(). The function only checks the ibs capabilities and sets up pci devices (if necessary). It runs only on one cpu but operates with the local APIC and some MSRs, thus it is better to disable preemption. [ 7.034377] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/483 [ 7.034385] caller is setup_APIC_eilvt+0x155/0x180 [ 7.034389] Pid: 483, comm: modprobe Not tainted 2.6.37-rc1-20101110+ #1 [ 7.034392] Call Trace: [ 7.034400] [<ffffffff812a2b72>] debug_smp_processor_id+0xd2/0xf0 [ 7.034404] [<ffffffff8101e985>] setup_APIC_eilvt+0x155/0x180 [ ... ] Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22812 Reported-by: <[email protected]> Signed-off-by: Robert Richter <[email protected]> Cc: [email protected] <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Rafael J. Wysocki <[email protected]> Cc: Dan Carpenter <[email protected]> Cc: Andrew Morton <[email protected]> Cc: <[email protected]> [2.6.37.x] LKML-Reference: <[email protected]> [ small cleanups ] Signed-off-by: Ingo Molnar <[email protected]>
2011-01-03[media] em28xx: radio_fops should also use unlocked_ioctlHans Verkuil1-1/+1
em28xx uses core assisted locking, so it shouldn't use .ioctl. The .ioctl callback was replaced by .unlocked_ioctl for video nodes, but not for radio nodes. This is now corrected. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-01-03[media] wm8775: Revert changeset fcb9757333 to avoid a regressionMauro Carvalho Chehab6-185/+61
It seems that cx88 and ivtv use wm8775 on some different modes. The patch that added support for a board with wm8775 broke ivtv boards with this device. As we're too close to release 2.6.37, let's just revert it. Reported-by: Andy Walls <[email protected]> Reported-by: Eric Sharkey <[email protected]> Reported-by: Auric <[email protected]> Reported by: David Gesswein <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-01-03[media] cx25840: Prevent device probe failure due to volume control ERANGE errorAndy Walls1-2/+17
This patch fixes a regression that crept into 2.6.36. The volume control scale in the cx25840 driver has an unusual mapping from register values to v4l2 volume control values. Enforce the mapping limits, so that the default volume control setting does not fall out of bounds to prevent the cx25840 module device probe from failing. Signed-off-by: Andy Walls <[email protected]> Cc: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-01-03dmaengine: provide dummy functions for DMA_ENGINE=nGuennadi Liakhovetski1-3/+10
This lets drivers, optionally using the dmaengine, build with DMA_ENGINE unselected. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2011-01-03mv_xor: fix race in tasklet functionSaeed Bishara1-1/+1
use mv_xor_slot_cleanup() instead of __mv_xor_slot_cleanup() as the former function aquires the spin lock that needed to protect the drivers data. Cc: <[email protected]> Signed-off-by: Saeed Bishara <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2011-01-03ARM: 6605/1: Add missing include "asm/memory.h"Axel Lin1-0/+1
This patch fixes below build error by adding the missing asm/memory.h, which is needed for arch_is_coherent(). $ make pxa3xx_defconfig; make CC init/do_mounts_rd.o In file included from include/linux/list_bl.h:5, from include/linux/rculist_bl.h:7, from include/linux/dcache.h:7, from include/linux/fs.h:381, from init/do_mounts_rd.c:3: include/linux/bit_spinlock.h: In function 'bit_spin_unlock': include/linux/bit_spinlock.h:61: error: implicit declaration of function 'arch_is_coherent' make[1]: *** [init/do_mounts_rd.o] Error 1 make: *** [init] Error 2 Signed-off-by: Axel Lin <[email protected]> Acked-by: Peter Huewe <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-01-03watchdog: Improve initialisation error message and documentationBen Hutchings2-2/+3
The error message 'NMI watchdog failed to create perf event...' does not make it clear that this is a fatal error for the watchdog. It also currently prints the error value as a pointer, rather than extracting the error code with PTR_ERR(). Fix that. Add a note to the description of the 'nowatchdog' kernel parameter to associate it with this message. Reported-by: Cesare Leonardi <[email protected]> Signed-off-by: Ben Hutchings <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Don Zickus <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: <[email protected]> # .37.x and later LKML-Reference: <1294009362.3167.126.camel@localhost> Signed-off-by: Ingo Molnar <[email protected]>
2011-01-02hwmon: (s3c-hwmon) Fix compilationMaurus Cuelenaere1-2/+0
The owner field was removed from struct attribute in 6fd69dc578fa0b1bbc3aad70ae3af9a137211707, so don't assign it anymore. Signed-off-by: Maurus Cuelenaere <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2011-01-02Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+4
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: i8259: initialize isr_ack KVM: MMU: Fix incorrect direct gfn for unpaged mode shadow
2011-01-02Merge branch 'for-linus' of ↵Linus Torvalds14-228/+167
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda: Use LPIB quirk for Dell Inspiron m101z/1120 sound: Prevent buffer overflow in OSS load_mixer_volumes ASoC: codecs: wm8753: Fix register cache incoherency ASoC: codecs: wm9090: Fix register cache incoherency ASoC: codecs: wm8962: Fix register cache incoherency ASoC: codecs: wm8955: Fix register cache incoherency ASoC: codecs: wm8904: Fix register cache incoherency ASoC: codecs: wm8741: Fix register cache incoherency ASoC: codecs: wm8523: Fix register cache incoherency ASoC: codecs: max98088: Fix register cache incoherency ASoC: codecs: Add missing control_type initialization
2011-01-02Merge branch 'rc-fixes' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kconfig: fix undesirable side effect of adding "visible" menu attribute
2011-01-02Merge branch 'fix/asoc' into for-linusTakashi Iwai12-226/+164
2011-01-02KVM: i8259: initialize isr_ackAvi Kivity1-0/+2
isr_ack is never initialized. So, until the first PIC reset, interrupts may fail to be injected. This can cause Windows XP to fail to boot, as reported in the fallout from the fix to https://bugzilla.kernel.org/show_bug.cgi?id=21962. Reported-and-tested-by: Nicolas Prochazka <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2010-12-30Merge branch 'drm-intel-fixes' of ↵Linus Torvalds8-7/+111
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915/dvo: Report LVDS attached to ch701x as connected Revert "drm/i915/bios: Reverse order of 100/120 Mhz SSC clocks" drm/i915: Verify Ironlake eDP presence on DP_A using the capability fuse drm/i915, intel_ips: When i915 loads after IPS, make IPS relink to i915. drm/i915/sdvo: Add hdmi connector properties after initing the connector drm/i915: Set the required VFMUNIT clock gating disable on Ironlake.
2010-12-30Revert "Staging: zram: work around oops due to startup ordering snafu"Nitin Gupta1-6/+0
This reverts commit 7e24cce38a99f373450db67bf576fe73e8168d66 because it was never appropriate for mainline. Do not check for init flag before starting I/O - zram module is unusable without this fix. The oops mentioned in the reverted commit message was actually a problem only with the zram version as present in project's own repository where we allocate struct zram_stats_cpu upon device initialization. OTOH, In mainline/staging version of zram, we allocate struct stats upfront, so this oops cannot happen in mainline version. Checking for init_done flag in zram_make_request() results in a *no-op* for any I/O operation since we simply always return success. This flag is actually set when the first write occurs on a zram disk which triggers its initialization. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=25722 Reported-by: Dennis Jansen <[email protected]> Signed-off-by: Nitin Gupta <[email protected]> Cc: Anton Blanchard <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-12-30Merge branch 'merge-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-1/+40
* 'merge-spi' of git://git.secretlab.ca/git/linux-2.6: spi/m68knommu: Coldfire QSPI platform support spi/omap2_mcspi.c: Force CS to be in inactive state after off-mode transition
2010-12-30memcg: fix wrong VM_BUG_ON() in try_charge()'s mm->owner checkKAMEZAWA Hiroyuki1-10/+9
At __mem_cgroup_try_charge(), VM_BUG_ON(!mm->owner) is checked. But as commented in mem_cgroup_from_task(), mm->owner can be NULL in some racy case. This check of VM_BUG_ON() is bad. A possible story to hit this is at swapoff()->try_to_unuse(). It passes mm_struct to mem_cgroup_try_charge_swapin() while mm->owner is NULL. If we can't get proper mem_cgroup from swap_cgroup information, mm->owner is used as charge target and we see NULL. Cc: Daisuke Nishimura <[email protected]> Cc: KOSAKI Motohiro <[email protected]> Reported-by: Hugh Dickins <[email protected]> Reported-by: Thomas Meyer <[email protected]> Signed-off-by: KAMEZAWA Hiroyuki <[email protected]> Reviewed-by: Balbir Singh <[email protected]> Signed-off-by: Hugh Dickins <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2010-12-30update Documentation/filesystems/LockingChristoph Hellwig1-112/+102
Mostly inspired by all the recent BKL removal changes, but a lot of older updates also weren't properly recorded. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-12-30drm/i915/dvo: Report LVDS attached to ch701x as connectedChris Wilson1-1/+1
As we have already detected something attached to the chip during initialisation, always report the LVDS connector status as connected during probing. Signed-off-by: Chris Wilson <[email protected]>
2010-12-30Revert "drm/i915/bios: Reverse order of 100/120 Mhz SSC clocks"Chris Wilson1-1/+1
As I feared, whilst this fixed the clocks for the Lenovo U160, it broke many other machines. So lets reverts commit 448f53a1ede54eb854d036abf and search for the real bug. Reported-and-tested-by: Travis Hume <[email protected]> [et al] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25842 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32698 Signed-off-by: Chris Wilson <[email protected]>
2010-12-30ALSA: hda: Use LPIB quirk for Dell Inspiron m101z/1120Daniel T Chen1-0/+1
Sjoerd Simons reports that, without using position_fix=1, recording experiences overruns. Work around that by applying the LPIB quirk for his hardware. Reported-and-tested-by: Sjoerd Simons <[email protected]> Cc: <[email protected]> Signed-off-by: Daniel T Chen <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-12-30sound: Prevent buffer overflow in OSS load_mixer_volumesDan Rosenberg1-2/+2
The load_mixer_volumes() function, which can be triggered by unprivileged users via the SOUND_MIXER_SETLEVELS ioctl, is vulnerable to a buffer overflow. Because the provided "name" argument isn't guaranteed to be NULL terminated at the expected 32 bytes, it's possible to overflow past the end of the last element in the mixer_vols array. Further exploitation can result in an arbitrary kernel write (via subsequent calls to load_mixer_volumes()) leading to privilege escalation, or arbitrary kernel reads via get_mixer_levels(). In addition, the strcmp() may leak bytes beyond the mixer_vols array. Signed-off-by: Dan Rosenberg <[email protected]> Cc: stable <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-12-29spi/m68knommu: Coldfire QSPI platform supportJate Sujjavanich1-1/+1
After grabbing a msg from the msgq, the mcfqspi_work function calls list_del_init on the mcfqspi->msgq which unintentionally deletes the rest of the list before it can be processed. If qspi call was made using spi_sync, this can result in a process hang. Signed-off-by: Jate Sujjavanich <[email protected]> Acked-by: Steven King <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-12-29kconfig: fix undesirable side effect of adding "visible" menu attributeJan Beulich1-0/+14
This lead to non-selected, non-user-selectable options to be written out to .config. This is not only pointless, but also preventing the user to be prompted should any of those options eventually become visible (e.g. by de-selecting the *_AUTO options the "visible" attribute was added for. Furthermore it is quite logical for the "visible" attribute of a menu to control the visibility of all contained prompts, which is what the patch does. Signed-off-by: Jan Beulich <[email protected]> Signed-off-by: Michal Marek <[email protected]>
2010-12-29spi/omap2_mcspi.c: Force CS to be in inactive state after off-mode transitionGregory CLEMENT1-0/+39
When SPI wake up from OFF mode, CS is in the wrong state: force it to the inactive state. During the system life, I monitored the CS behavior using a oscilloscope. I also activated debug in omap2_mcspi, so I saw when driver disable the clocks and restore context when device is not used.Each time the CS was in the correct state. It was only when system was put suspend to ram with off-mode activated that on resume the CS was in wrong state( ie activated). Changelog: * Change from v1 to v2: - Rebase on linus/master (after 2.6.37-rc1) - Do some clean-up and fix indentation on both patches - Add more explanations for patch 2 * Change from v2 to v3: - Use directly resume function of spi_master instead of using function - from spi_device as Grant Likely pointed it out. - Force this transition explicitly for each CS used by a device. * Change from v3 to v4: - Patch clean-up according to Kevin Hilman and checkpatch. - Now force CS to be in inactive state only if it was inactive when it was suspended. * Change from v4 to v5: - Rebase on linus/master (after 2.6.37-rc3) - Collapse some lines as pointed by Grant Likely - Fix a spelling * Change from v5 to v6: - Rebase on linus/master (after 2.6.37-rc7) - Use CONFIG_SUSPEND instead of CONFIG_PM - Didn't use legacy PM methods anymore. Instead, add a struct dev_pm_ops and add the resume method there. - Fix multi-line comment style * Change from v6 to v7: - Rebase on linus/master (after 2.6.37-rc8) - Drop an extra line Signed-off-by: Gregory CLEMENT <[email protected]> Acked-by: David Brownell <[email protected]> Reviewed-by: Kevin Hilman <[email protected]> Signed-off-by: Grant Likely <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.