aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-07pinctrl: lochnagar: select GPIOLIBArnd Bergmann1-0/+1
In a rare randconfig build I came across one configuration that does not enable CONFIG_GPIOLIB, which is needed by lochnagar: ERROR: "devm_gpiochip_add_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_free" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_request" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_get_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! Add another 'select' like all other pinctrl drivers have. Fixes: 0548448b719a ("pinctrl: lochnagar: Add support for the Cirrus Logic Lochnagar") Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Charles Keepax <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2020-01-07Merge branch 'cpufreq/arm/fixes' of ↵Rafael J. Wysocki1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq driver fix for v5.5-rc6 from Viresh Kumar: "Blacklist Tegra20/30 for probing by cpufreq-dt driver." * 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs
2020-01-07drivers: thermal: tsens: Work with old DTBsAmit Kucheria1-0/+3
In order for the old DTBs to continue working, the new interrupt code must not return an error if interrupts are not defined. Don't return an error in case of -ENXIO. Fixes: 634e11d5b450a ("drivers: thermal: tsens: Add interrupt support") Suggested-by: Stephan Gerhold <[email protected]> Signed-off-by: Amit Kucheria <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Tested-by: Bjorn Andersson <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]> Link: https://lore.kernel.org/r/cea3317c5d793db312064d68b261ad420a4a81b1.1576146898.git.amit.kucheria@linaro.org
2020-01-06Merge tag 'mlx5-fixes-2020-01-06' of ↵David S. Miller10-96/+119
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-01-06 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v5.3 ('net/mlx5: Move devlink registration before interfaces load') For -stable v5.4 ('net/mlx5e: Fix hairpin RSS table size') ('net/mlx5: DR, Init lists that are used in rule's member') ('net/mlx5e: Always print health reporter message to dmesg') ('net/mlx5: DR, No need for atomic refcount for internal SW steering resources') ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-06Merge tag 'trace-v5.5-rc5' of ↵Linus Torvalds7-10/+31
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Various tracing fixes: - kbuild found missing define of MCOUNT_INSN_SIZE for various build configs - Initialize variable to zero as gcc thinks it is used undefined (it really isn't but the code is subtle enough that this doesn't hurt) - Convert from do_div() to div64_ull() to prevent potential divide by zero - Unregister a trace point on error path in sched_wakeup tracer - Use signed offset for archs that can have stext not be first - A simple indentation fix (whitespace error)" * tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix indentation issue kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail tracing: Change offset type to s32 in preempt/irq tracepoints ftrace: Avoid potential division by zero in function profiler tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined tracing: Define MCOUNT_INSN_SIZE when not defined without direct calls tracing: Initialize val to zero in parse_entry of inject code
2020-01-06net/mlx5: DR, Init lists that are used in rule's memberErez Shitrit1-0/+3
Whenever adding new member of rule object we attach it to 2 lists, These 2 lists should be initialized first. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Erez Shitrit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-01-06net/mlx5e: Fix hairpin RSS table sizeEli Cohen3-17/+17
Set hairpin table size to the corret size, based on the groups that would be created in it. Groups are laid out on the table such that a group occupies a range of entries in the table. This implies that the group ranges should have correspondence to the table they are laid upon. The patch cited below made group 1's size to grow hence causing overflow of group range laid on the table. Fixes: a795d8db2a6d ("net/mlx5e: Support RSS for IP-in-IP and IPv6 tunneled packets") Signed-off-by: Eli Cohen <[email protected]> Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-01-06net/mlx5: DR, No need for atomic refcount for internal SW steering resourcesYevgeny Kliteynik3-12/+14
No need for an atomic refcounter for the STE and hashtables. These are internal SW steering resources and they are always under domain mutex. This also fixes the following refcount error: refcount_t: addition on 0; use-after-free. WARNING: CPU: 9 PID: 3527 at lib/refcount.c:25 refcount_warn_saturate+0x81/0xe0 Call Trace: dr_table_init_nic+0x10d/0x110 [mlx5_core] mlx5dr_table_create+0xb4/0x230 [mlx5_core] mlx5_cmd_dr_create_flow_table+0x39/0x120 [mlx5_core] __mlx5_create_flow_table+0x221/0x5f0 [mlx5_core] esw_create_offloads_fdb_tables+0x180/0x5a0 [mlx5_core] ... Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-01-06Revert "net/mlx5: Support lockless FTE read lookups"Parav Pandit2-56/+15
This reverts commit 7dee607ed0e04500459db53001d8e02f8831f084. During cleanup path, FTE's parent node group is removed which is referenced by the FTE while freeing the FTE. Hence FTE's lockless read lookup optimization done in cited commit is not possible at the moment. Hence, revert the commit. This avoid below KAZAN call trace. [ 110.390896] BUG: KASAN: use-after-free in find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391048] Read of size 4 at addr ffff888c19e6d220 by task swapper/12/0 [ 110.391219] CPU: 12 PID: 0 Comm: swapper/12 Not tainted 5.5.0-rc1+ [ 110.391222] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/02/2014 [ 110.391225] Call Trace: [ 110.391229] <IRQ> [ 110.391246] dump_stack+0x95/0xd5 [ 110.391307] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391320] print_address_description.constprop.5+0x20/0x320 [ 110.391379] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391435] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391441] __kasan_report+0x149/0x18c [ 110.391499] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391504] kasan_report+0x12/0x20 [ 110.391511] __asan_report_load4_noabort+0x14/0x20 [ 110.391567] find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391625] del_sw_fte_rcu+0x4a/0x100 [mlx5_core] [ 110.391633] rcu_core+0x404/0x1950 [ 110.391640] ? rcu_accelerate_cbs_unlocked+0x100/0x100 [ 110.391649] ? run_rebalance_domains+0x201/0x280 [ 110.391654] rcu_core_si+0xe/0x10 [ 110.391661] __do_softirq+0x181/0x66c [ 110.391670] irq_exit+0x12c/0x150 [ 110.391675] smp_apic_timer_interrupt+0xf0/0x370 [ 110.391681] apic_timer_interrupt+0xf/0x20 [ 110.391684] </IRQ> [ 110.391695] RIP: 0010:cpuidle_enter_state+0xfa/0xba0 [ 110.391703] Code: 3d c3 9b b5 50 e8 56 75 6e fe 48 89 45 c8 0f 1f 44 00 00 31 ff e8 a6 94 6e fe 45 84 ff 0f 85 f6 02 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 db 06 00 00 4d 63 fe 4b 8d 04 7f 49 8d 04 87 49 8d [ 110.391706] RSP: 0018:ffff888c23a6fce8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 110.391712] RAX: dffffc0000000000 RBX: ffffe8ffff7002f8 RCX: 000000000000001f [ 110.391715] RDX: 1ffff11184ee6cb5 RSI: 0000000040277d83 RDI: ffff888c277365a8 [ 110.391718] RBP: ffff888c23a6fd40 R08: 0000000000000002 R09: 0000000000035280 [ 110.391721] R10: ffff888c23a6fc80 R11: ffffed11847485d0 R12: ffffffffb1017740 [ 110.391723] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000000 [ 110.391732] ? cpuidle_enter_state+0xea/0xba0 [ 110.391738] cpuidle_enter+0x4f/0xa0 [ 110.391747] call_cpuidle+0x6d/0xc0 [ 110.391752] do_idle+0x360/0x430 [ 110.391758] ? arch_cpu_idle_exit+0x40/0x40 [ 110.391765] ? complete+0x67/0x80 [ 110.391771] cpu_startup_entry+0x1d/0x20 [ 110.391779] start_secondary+0x2f3/0x3c0 [ 110.391784] ? set_cpu_sibling_map+0x2500/0x2500 [ 110.391795] secondary_startup_64+0xa4/0xb0 [ 110.391841] Allocated by task 290: [ 110.391917] save_stack+0x21/0x90 [ 110.391921] __kasan_kmalloc.constprop.8+0xa7/0xd0 [ 110.391925] kasan_kmalloc+0x9/0x10 [ 110.391929] kmem_cache_alloc_trace+0xf6/0x270 [ 110.391987] create_root_ns.isra.36+0x58/0x260 [mlx5_core] [ 110.392044] mlx5_init_fs+0x5fd/0x1ee0 [mlx5_core] [ 110.392092] mlx5_load_one+0xc7a/0x3860 [mlx5_core] [ 110.392139] init_one+0x6ff/0xf90 [mlx5_core] [ 110.392145] local_pci_probe+0xde/0x190 [ 110.392150] work_for_cpu_fn+0x56/0xa0 [ 110.392153] process_one_work+0x678/0x1140 [ 110.392157] worker_thread+0x573/0xba0 [ 110.392162] kthread+0x341/0x400 [ 110.392166] ret_from_fork+0x1f/0x40 [ 110.392218] Freed by task 2742: [ 110.392288] save_stack+0x21/0x90 [ 110.392292] __kasan_slab_free+0x137/0x190 [ 110.392296] kasan_slab_free+0xe/0x10 [ 110.392299] kfree+0x94/0x250 [ 110.392357] tree_put_node+0x257/0x360 [mlx5_core] [ 110.392413] tree_remove_node+0x63/0xb0 [mlx5_core] [ 110.392469] clean_tree+0x199/0x240 [mlx5_core] [ 110.392525] mlx5_cleanup_fs+0x76/0x580 [mlx5_core] [ 110.392572] mlx5_unload+0x22/0xc0 [mlx5_core] [ 110.392619] mlx5_unload_one+0x99/0x260 [mlx5_core] [ 110.392666] remove_one+0x61/0x160 [mlx5_core] [ 110.392671] pci_device_remove+0x10b/0x2c0 [ 110.392677] device_release_driver_internal+0x1e4/0x490 [ 110.392681] device_driver_detach+0x36/0x40 [ 110.392685] unbind_store+0x147/0x200 [ 110.392688] drv_attr_store+0x6f/0xb0 [ 110.392693] sysfs_kf_write+0x127/0x1d0 [ 110.392697] kernfs_fop_write+0x296/0x420 [ 110.392702] __vfs_write+0x66/0x110 [ 110.392707] vfs_write+0x1a0/0x500 [ 110.392711] ksys_write+0x164/0x250 [ 110.392715] __x64_sys_write+0x73/0xb0 [ 110.392720] do_syscall_64+0x9f/0x3a0 [ 110.392725] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 7dee607ed0e0 ("net/mlx5: Support lockless FTE read lookups") Signed-off-by: Parav Pandit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-01-06net/mlx5: Move devlink registration before interfaces loadMichael Guralnik1-7/+9
Register devlink before interfaces are added. This will allow interfaces to use devlink while initalizing. For example, call mlx5_is_roce_enabled. Fixes: aba25279c100 ("net/mlx5e: Add TX reporter support") Signed-off-by: Michael Guralnik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-01-06net/mlx5e: Always print health reporter message to dmesgEran Ben Elisha1-3/+4
In case a reporter exists, error message is logged only to the devlink tracer. The devlink tracer is a visibility utility only, which user can choose not to monitor. After cited patch, 3rd party monitoring tools that tracks these error message will no longer find them in dmesg, causing a regression. With this patch, error messages are also logged into the dmesg. Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-01-06net/mlx5e: Avoid duplicating rule destinationsDmytro Linkin1-1/+57
Following scenario easily break driver logic and crash the kernel: 1. Add rule with mirred actions to same device. 2. Delete this rule. In described scenario rule is not added to database and on deletion driver access invalid entry. Example: $ tc filter add dev ens1f0_0 ingress protocol ip prio 1 \ flower skip_sw \ action mirred egress mirror dev ens1f0_1 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter del dev ens1f0_0 ingress protocol ip prio 1 Dmesg output: [ 376.634396] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 3439): DESTROY_FLOW_GROUP(0x934) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x563e2f) [ 376.654983] mlx5_core 0000:82:00.0: del_hw_flow_group:567:(pid 3439): flow steering can't destroy fg 89 of ft 3145728 [ 376.673433] kasan: CONFIG_KASAN_INLINE enabled [ 376.683769] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 376.695229] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [ 376.705069] CPU: 7 PID: 3439 Comm: tc Not tainted 5.4.0-rc5+ #76 [ 376.714959] Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0a 08/12/2016 [ 376.726371] RIP: 0010:mlx5_del_flow_rules+0x105/0x960 [mlx5_core] [ 376.735817] Code: 01 00 00 00 48 83 eb 08 e8 28 d9 ff ff 4c 39 e3 75 d8 4c 8d bd c0 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 84 04 00 00 48 8d 7d 28 8b 9 d [ 376.761261] RSP: 0018:ffff888847c56db8 EFLAGS: 00010202 [ 376.770054] RAX: dffffc0000000000 RBX: ffff8888582a6da0 RCX: ffff888847c56d60 [ 376.780743] RDX: 0000000000000058 RSI: 0000000000000008 RDI: 0000000000000282 [ 376.791328] RBP: 0000000000000000 R08: fffffbfff0c60ea6 R09: fffffbfff0c60ea6 [ 376.802050] R10: fffffbfff0c60ea5 R11: ffffffff8630752f R12: ffff8888582a6da0 [ 376.812798] R13: dffffc0000000000 R14: ffff8888582a6da0 R15: 00000000000002c0 [ 376.823445] FS: 00007f675f9a8840(0000) GS:ffff88886d200000(0000) knlGS:0000000000000000 [ 376.834971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 376.844179] CR2: 00000000007d9640 CR3: 00000007d3f26003 CR4: 00000000001606e0 [ 376.854843] Call Trace: [ 376.868542] __mlx5_eswitch_del_rule+0x49/0x300 [mlx5_core] [ 376.877735] mlx5e_tc_del_fdb_flow+0x6ec/0x9e0 [mlx5_core] [ 376.921549] mlx5e_flow_put+0x2b/0x50 [mlx5_core] [ 376.929813] mlx5e_delete_flower+0x5b6/0xbd0 [mlx5_core] [ 376.973030] tc_setup_cb_reoffload+0x29/0xc0 [ 376.980619] fl_reoffload+0x50a/0x770 [cls_flower] [ 377.015087] tcf_block_playback_offloads+0xbd/0x250 [ 377.033400] tcf_block_setup+0x1b2/0xc60 [ 377.057247] tcf_block_offload_cmd+0x195/0x240 [ 377.098826] tcf_block_offload_unbind+0xe7/0x180 [ 377.107056] __tcf_block_put+0xe5/0x400 [ 377.114528] ingress_destroy+0x3d/0x60 [sch_ingress] [ 377.122894] qdisc_destroy+0xf1/0x5a0 [ 377.129993] qdisc_graft+0xa3d/0xe50 [ 377.151227] tc_get_qdisc+0x48e/0xa20 [ 377.165167] rtnetlink_rcv_msg+0x35d/0x8d0 [ 377.199528] netlink_rcv_skb+0x11e/0x340 [ 377.219638] netlink_unicast+0x408/0x5b0 [ 377.239913] netlink_sendmsg+0x71b/0xb30 [ 377.267505] sock_sendmsg+0xb1/0xf0 [ 377.273801] ___sys_sendmsg+0x635/0x900 [ 377.312784] __sys_sendmsg+0xd3/0x170 [ 377.338693] do_syscall_64+0x95/0x460 [ 377.344833] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 377.352321] RIP: 0033:0x7f675e58e090 To avoid this, for every mirred action check if output device was already processed. If so - drop rule with EOPNOTSUPP error. Signed-off-by: Dmytro Linkin <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-01-07gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIPDmitry Osipenko1-0/+1
Driver fails to compile in a minimized kernel's configuration because of the missing dependency on GPIOLIB_IRQCHIP. error: ‘struct gpio_chip’ has no member named ‘irq’ 44 | virq = irq_find_mapping(gpio->gpio_chip.irq.domain, offset); Signed-off-by: Dmitry Osipenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2020-01-06Merge tag 'tpmdd-next-20200106' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds1-19/+15
Pull tpmd fixes from Jarkko Sakkinen: "There has been a bunch of reports (e.g. [*]) reporting that when commit 5b359c7c4372 ("tpm_tis_core: Turn on the TPM before probing IRQ's") and subsequent fixes are applied it causes boot freezes on some machines. Unfortunately hardware where this causes a failure is not widely available (only one I'm aware is Lenovo T490), which means we cannot predict yet how long it will take to properly fix tpm_tis interrupt probing. Thus, the least worst short term action is to revert the code to the state before this commit. In long term we need fix the tpm_tis probing code to work on machines that Stefan's patches were supposed to fix. With these patches reverted nothing fatal happens, TPM is fallbacked to be used in polling mode (which is not in the end too bad because there are no high throughput workloads for TPM). [*] https://bugzilla.kernel.org/show_bug.cgi?id=205935" * tag 'tpmdd-next-20200106' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQ's" tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts" tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init"
2020-01-06bpf: Fix passing modified ctx to ld/abs/ind instructionDaniel Borkmann1-2/+7
Anatoly has been fuzzing with kBdysch harness and reported a KASAN slab oob in one of the outcomes: [...] [ 77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406 [ 77.361119] [ 77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215eba #1 [ 77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 77.362984] Call Trace: [ 77.363249] dump_stack+0x97/0xe0 [ 77.363603] print_address_description.constprop.0+0x1d/0x220 [ 77.364251] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365030] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365860] __kasan_report.cold+0x37/0x7b [ 77.366365] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.366940] kasan_report+0xe/0x20 [ 77.367295] bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.367821] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.368278] ? mark_lock+0xa3/0x9b0 [ 77.368641] ? kvm_sched_clock_read+0x14/0x30 [ 77.369096] ? sched_clock+0x5/0x10 [ 77.369460] ? sched_clock_cpu+0x18/0x110 [ 77.369876] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.370330] ___bpf_prog_run+0x16c0/0x28f0 [ 77.370755] __bpf_prog_run32+0x83/0xc0 [ 77.371153] ? __bpf_prog_run64+0xc0/0xc0 [ 77.371568] ? match_held_lock+0x1b/0x230 [ 77.371984] ? rcu_read_lock_held+0xa1/0xb0 [ 77.372416] ? rcu_is_watching+0x34/0x50 [ 77.372826] sk_filter_trim_cap+0x17c/0x4d0 [ 77.373259] ? sock_kzfree_s+0x40/0x40 [ 77.373648] ? __get_filter+0x150/0x150 [ 77.374059] ? skb_copy_datagram_from_iter+0x80/0x280 [ 77.374581] ? do_raw_spin_unlock+0xa5/0x140 [ 77.375025] unix_dgram_sendmsg+0x33a/0xa70 [ 77.375459] ? do_raw_spin_lock+0x1d0/0x1d0 [ 77.375893] ? unix_peer_get+0xa0/0xa0 [ 77.376287] ? __fget_light+0xa4/0xf0 [ 77.376670] __sys_sendto+0x265/0x280 [ 77.377056] ? __ia32_sys_getpeername+0x50/0x50 [ 77.377523] ? lock_downgrade+0x350/0x350 [ 77.377940] ? __sys_setsockopt+0x2a6/0x2c0 [ 77.378374] ? sock_read_iter+0x240/0x240 [ 77.378789] ? __sys_socketpair+0x22a/0x300 [ 77.379221] ? __ia32_sys_socket+0x50/0x50 [ 77.379649] ? mark_held_locks+0x1d/0x90 [ 77.380059] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 77.380536] __x64_sys_sendto+0x74/0x90 [ 77.380938] do_syscall_64+0x68/0x2a0 [ 77.381324] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 77.381878] RIP: 0033:0x44c070 [...] After further debugging, turns out while in case of other helper functions we disallow passing modified ctx, the special case of ld/abs/ind instruction which has similar semantics (except r6 being the ctx argument) is missing such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache() and others are expecting skb fields in original position, hence, add check_ctx_reg() to reject any modified ctx. Issue was first introduced back in f1174f77b50c ("bpf/verifier: rework value tracking"). Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Reported-by: Anatoly Trosinenko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-01-06Merge tag 'linux-watchdog-5.5-fixes' of ↵Linus Torvalds5-4/+7
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: - fix module aliases - fix potential build errors - fix missing conversion of imx7ulp_wdt_enable() - fix platform_get_irq() complaints - fix NCT6116D support * tag 'linux-watchdog-5.5-fixes' of git://www.linux-watchdog.org/linux-watchdog: watchdog: orion: fix platform_get_irq() complaints watchdog: rn5t618_wdt: fix module aliases watchdog: tqmx86_wdt: Fix build error watchdog: max77620_wdt: fix potential build errors watchdog: imx7ulp: Fix missing conversion of imx7ulp_wdt_enable() watchdog: w83627hf_wdt: Fix support NCT6116D
2020-01-06Merge branch 'atlantic-bugfixes'David S. Miller3-8/+3
Igor Russkikh says: ==================== Aquantia/Marvell atlantic bugfixes 2020/01 Here is a set of recently discovered bugfixes, ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-06net: atlantic: remove duplicate entriesIgor Russkikh1-3/+0
Function entries were duplicated accidentally, removing the dups. Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06net: atlantic: loopback configuration in improper placeIgor Russkikh1-2/+2
Initial loopback configuration should be called earlier, before starting traffic on HW blocks. Otherwise depending on race conditions it could be kept disabled. Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06net: atlantic: broken link status on old fwIgor Russkikh1-3/+1
Last code/checkpatch cleanup did a copy paste error where code from firmware 3 API logic was moved to firmware 1 logic. This resulted in FW1.x users would never see the link state as active. Fixes: 7b0c342f1f67 ("net: atlantic: code style cleanup") Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06bpf: cgroup: prevent out-of-order release of cgroup bpfRoman Gushchin1-2/+9
Before commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") cgroup bpf structures were released with corresponding cgroup structures. It guaranteed the hierarchical order of destruction: children were always first. It preserved attached programs from being released before their propagated copies. But with cgroup auto-detachment there are no such guarantees anymore: cgroup bpf is released as soon as the cgroup is offline and there are no live associated sockets. It means that an attached program can be detached and released, while its propagated copy is still living in the cgroup subtree. This will obviously lead to an use-after-free bug. To reproduce the issue the following script can be used: #!/bin/bash CGROOT=/sys/fs/cgroup mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C sleep 1 ./test_cgrp2_attach ${CGROOT}/A egress & A_PID=$! ./test_cgrp2_attach ${CGROOT}/B egress & B_PID=$! echo $$ > ${CGROOT}/A/C/cgroup.procs iperf -s & S_PID=$! iperf -c localhost -t 100 & C_PID=$! sleep 1 echo $$ > ${CGROOT}/B/cgroup.procs echo ${S_PID} > ${CGROOT}/B/cgroup.procs echo ${C_PID} > ${CGROOT}/B/cgroup.procs sleep 1 rmdir ${CGROOT}/A/C rmdir ${CGROOT}/A sleep 1 kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID} On the unpatched kernel the following stacktrace can be obtained: [ 33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002 [ 33.620677] #PF: supervisor read access in kernel mode [ 33.621293] #PF: error_code(0x0000) - not-present page [ 33.622754] Oops: 0000 [#1] SMP NOPTI [ 33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23 [ 33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0 [ 33.635809] Call Trace: [ 33.636118] ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0 [ 33.636728] ? __switch_to_asm+0x40/0x70 [ 33.637196] ip_finish_output+0x68/0xa0 [ 33.637654] ip_output+0x76/0xf0 [ 33.638046] ? __ip_finish_output+0x1c0/0x1c0 [ 33.638576] __ip_queue_xmit+0x157/0x410 [ 33.639049] __tcp_transmit_skb+0x535/0xaf0 [ 33.639557] tcp_write_xmit+0x378/0x1190 [ 33.640049] ? _copy_from_iter_full+0x8d/0x260 [ 33.640592] tcp_sendmsg_locked+0x2a2/0xdc0 [ 33.641098] ? sock_has_perm+0x10/0xa0 [ 33.641574] tcp_sendmsg+0x28/0x40 [ 33.641985] sock_sendmsg+0x57/0x60 [ 33.642411] sock_write_iter+0x97/0x100 [ 33.642876] new_sync_write+0x1b6/0x1d0 [ 33.643339] vfs_write+0xb6/0x1a0 [ 33.643752] ksys_write+0xa7/0xe0 [ 33.644156] do_syscall_64+0x5b/0x1b0 [ 33.644605] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by grabbing a reference to the bpf structure of each ancestor on the initialization of the cgroup bpf structure, and dropping the reference at the end of releasing the cgroup bpf structure. This will restore the hierarchical order of cgroup bpf releasing, without adding any operations on hot paths. Thanks to Josef Bacik for the debugging and the initial analysis of the problem. Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Reported-by: Josef Bacik <[email protected]> Signed-off-by: Roman Gushchin <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2020-01-06firmware: tee_bnxt: Fix multiple call to tee_client_close_contextVikas Gupta1-1/+0
Fix calling multiple tee_client_close_context in case of shm allocation fails. Fixes: 246880958ac9 (“firmware: broadcom: add OP-TEE based BNXT f/w manager”) Signed-off-by: Vikas Gupta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06net: dsa: mv88e6xxx: Preserve priority when setting CPU port.Andrew Lunn2-0/+6
The 6390 family uses an extended register to set the port connected to the CPU. The lower 5 bits indicate the port, the upper three bits are the priority of the frames as they pass through the switch, what egress queue they should use, etc. Since frames being set to the CPU are typically management frames, BPDU, IGMP, ARP, etc set the priority to 7, the reset default, and the highest. Fixes: 33641994a676 ("net: dsa: mv88e6xxx: Monitor and Management tables") Signed-off-by: Andrew Lunn <[email protected]> Tested-by: Chris Healy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06net: ethernet: sxgbe: Rename Samsung to lowercaseKrzysztof Kozlowski2-2/+2
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06net: wan: sdla: Fix cast from pointer to integer of different sizeKrzysztof Kozlowski1-1/+1
Since net_device.mem_start is unsigned long, it should not be cast to int right before casting to pointer. This fixes warning (compile testing on alpha architecture): drivers/net/wan/sdla.c: In function ‘sdla_transmit’: drivers/net/wan/sdla.c:711:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLYXin Long1-10/+18
This patch is to fix a memleak caused by no place to free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq with an allocated chunk in cmd->obj.chunk. So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on the cmd seq when any cmd returns error. While at it, also remove 'nomem' label. Reported-by: [email protected] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06tipc: eliminate KMSAN: uninit-value in __tipc_nl_compat_dumpit errorYing Xue1-2/+2
syzbot found the following crash on: ===================================================== BUG: KMSAN: uninit-value in __nlmsg_parse include/net/netlink.h:661 [inline] BUG: KMSAN: uninit-value in nlmsg_parse_deprecated include/net/netlink.h:706 [inline] BUG: KMSAN: uninit-value in __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215 CPU: 0 PID: 12425 Comm: syz-executor062 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x57/0xa0 mm/kmsan/kmsan_instr.c:245 __nlmsg_parse include/net/netlink.h:661 [inline] nlmsg_parse_deprecated include/net/netlink.h:706 [inline] __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215 tipc_nl_compat_dumpit+0x761/0x910 net/tipc/netlink_compat.c:308 tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline] tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x444179 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b d8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd2d6409c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000444179 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 00000000006ce018 R08: 0000000000000000 R09: 00000000004002e0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401e20 R13: 0000000000401eb0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xe47/0x11f0 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x309/0xa50 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] nlmsg_new include/net/netlink.h:888 [inline] tipc_nl_compat_dumpit+0x6e4/0x910 net/tipc/netlink_compat.c:301 tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline] tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ===================================================== The complaint above occurred because the memory region pointed by attrbuf variable was not initialized. To eliminate this warning, we use kcalloc() rather than kmalloc_array() to allocate memory for attrbuf. Reported-by: [email protected] Signed-off-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06Merge tag 'spi-fix-v5.5-rc5' of ↵Linus Torvalds7-47/+54
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of fixes here, one to make the newly added PTP timestamping code more accurate, a few driver fixes and a fix for the core DT binding to document the fact that we support eight wire buses" * tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Document Octal mode as valid SPI bus width spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode spi: Don't look at TX buffer for PTP system timestamping spi: uniphier: Fix FIFO threshold
2020-01-06Merge tag 'regulator-fix-v5.5-rc5' of ↵Linus Torvalds2-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Three small fixes here, two the result of Axel Lin's amazing work tracking down inconsistencies in drivers" * tag 'regulator-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: bd70528: Remove .set_ramp_delay for bd70528_ldo_ops regulator: axp20x: Fix axp20x_set_ramp_delay regulator: axp20x: Fix AXP22x ELDO2 regulator enable bitmask
2020-01-06tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXPPeng Fan1-1/+0
i.MX8QXP lpuart is compatible with i.MX7ULP, so no need an extra entry for i.MX8QXP. Signed-off-by: Peng Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06tty: serial: fsl_lpuart: support UPIO_MEM32 for lpuart32Peng Fan1-1/+3
"earlycon" no need to specify the value string since it uses stdout-path parameters. However when earlycon and normal console are not using the same uart port, we need specify value string to earlycon, this is what we need to do when support dual linux using jailhouse hypervisor. The 2nd linux will use the uart of the 1st linux as earlycon. earlycon=lpuart32,mmio32,0x5a060010,115200 not work for i.MX8QXP. It is because lpuart32_early_console_setup not support little endian. Since the original code is to support UPIO_MEM32BE, so if not UPIO_MEM32, we still take it as UPIO_MEM32BE Acked-by: Fugang Duan <[email protected]> Signed-off-by: Peng Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06tty: serial: fsl_lpuart: drop EARLYCON_DECLAREPeng Fan1-2/+0
EARLYCON_DECLARE is just a wrapper of OF_EARLYCON_DECLARE, since we already have OF_EARLYCON_DECLARE for lpuart and lpuart32, so no need EARLYCON_DECLARE. Signed-off-by: Peng Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOPAkash Asthana1-27/+9
Remove code from the driver that create and maintain loopback sysfs node. Instead use the ioctl TIOCMSET with TIOCM_LOOP argument to set HW to loopback mode. Signed-off-by: Akash Asthana <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06tty: serial: qcom_geni_serial: Wakeup IRQ cleanupAkash Asthana1-48/+43
This patch is the continuation of below mentioned commits which adds wakeup feature over the UART RX line. 1)commit 3e4aaea7a039 ("tty: serial: qcom_geni_serial: IRQ cleanup")[v2] 2)commit 8b7103f31950 ("tty: serial: qcom_geni_serial: Wakeup over UART RX")[v2] The following cleanup is done based on upstream comment received on subsequent versions of the above-mentioned commits to simplifying the code. - Use devm_kasprintf API in place of scnprintf. - Use dev_pm_set_dedicated_wake_irq API that will take care of requesting and attaching wakeup irqs for devices. Also, it sets wakeirq status to WAKE_IRQ_DEDICATED_ALLOCATED as a result enabling/disabling of wake irq will be managed by suspend/resume framework. We can remove the code for enabling and disabling of wake irq from the this driver. - Use platform_get_irq_optional API to get optional wakeup IRQ for device. - Move ISR registration later in probe after uart port gets register with serial core. Patch link: - https://patchwork.kernel.org/patch/11189717/ (v3) - https://patchwork.kernel.org/patch/11227435/ (v4) - https://patchwork.kernel.org/patch/11241669/ (v5) - https://patchwork.kernel.org/patch/11258045/ (v6) Signed-off-by: Akash Asthana <[email protected]> Reviewed-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06serial: samsung: Rename Exynos to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06serial: ucc_uart: remove redundant assignment to pointer bdpColin Ian King1-2/+0
The variable bdp is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Acked-by: Timur Tabi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06chardev: Avoid potential use-after-free in 'chrdev_open()'Will Deacon1-1/+1
'chrdev_open()' calls 'cdev_get()' to obtain a reference to the 'struct cdev *' stashed in the 'i_cdev' field of the target inode structure. If the pointer is NULL, then it is initialised lazily by looking up the kobject in the 'cdev_map' and so the whole procedure is protected by the 'cdev_lock' spinlock to serialise initialisation of the shared pointer. Unfortunately, it is possible for the initialising thread to fail *after* installing the new pointer, for example if the subsequent '->open()' call on the file fails. In this case, 'cdev_put()' is called, the reference count on the kobject is dropped and, if nobody else has taken a reference, the release function is called which finally clears 'inode->i_cdev' from 'cdev_purge()' before potentially freeing the object. The problem here is that a racing thread can happily take the 'cdev_lock' and see the non-NULL pointer in the inode, which can result in a refcount increment from zero and a warning: | ------------[ cut here ]------------ | refcount_t: addition on 0; use-after-free. | WARNING: CPU: 2 PID: 6385 at lib/refcount.c:25 refcount_warn_saturate+0x6d/0xf0 | Modules linked in: | CPU: 2 PID: 6385 Comm: repro Not tainted 5.5.0-rc2+ #22 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 | RIP: 0010:refcount_warn_saturate+0x6d/0xf0 | Code: 05 55 9a 15 01 01 e8 9d aa c8 ff 0f 0b c3 80 3d 45 9a 15 01 00 75 ce 48 c7 c7 00 9c 62 b3 c6 08 | RSP: 0018:ffffb524c1b9bc70 EFLAGS: 00010282 | RAX: 0000000000000000 RBX: ffff9e9da1f71390 RCX: 0000000000000000 | RDX: ffff9e9dbbd27618 RSI: ffff9e9dbbd18798 RDI: ffff9e9dbbd18798 | RBP: 0000000000000000 R08: 000000000000095f R09: 0000000000000039 | R10: 0000000000000000 R11: ffffb524c1b9bb20 R12: ffff9e9da1e8c700 | R13: ffffffffb25ee8b0 R14: 0000000000000000 R15: ffff9e9da1e8c700 | FS: 00007f3b87d26700(0000) GS:ffff9e9dbbd00000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 00007fc16909c000 CR3: 000000012df9c000 CR4: 00000000000006e0 | DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 | DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 | Call Trace: | kobject_get+0x5c/0x60 | cdev_get+0x2b/0x60 | chrdev_open+0x55/0x220 | ? cdev_put.part.3+0x20/0x20 | do_dentry_open+0x13a/0x390 | path_openat+0x2c8/0x1470 | do_filp_open+0x93/0x100 | ? selinux_file_ioctl+0x17f/0x220 | do_sys_open+0x186/0x220 | do_syscall_64+0x48/0x150 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 | RIP: 0033:0x7f3b87efcd0e | Code: 89 54 24 08 e8 a3 f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f4 | RSP: 002b:00007f3b87d259f0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 | RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b87efcd0e | RDX: 0000000000000000 RSI: 00007f3b87d25a80 RDI: 00000000ffffff9c | RBP: 00007f3b87d25e90 R08: 0000000000000000 R09: 0000000000000000 | R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe188f504e | R13: 00007ffe188f504f R14: 00007f3b87d26700 R15: 0000000000000000 | ---[ end trace 24f53ca58db8180a ]--- Since 'cdev_get()' can already fail to obtain a reference, simply move it over to use 'kobject_get_unless_zero()' instead of 'kobject_get()', which will cause the racing thread to return -ENXIO if the initialising thread fails unexpectedly. Cc: Hillf Danton <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Al Viro <[email protected]> Reported-by: [email protected] Signed-off-by: Will Deacon <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06serdev: Don't claim unsupported ACPI serial devicesPunit Agrawal1-0/+10
Serdev sub-system claims all ACPI serial devices that are not already initialised. As a result, no device node is created for serial ports on certain boards such as the Apollo Lake based UP2. This has the unintended consequence of not being able to raise the login prompt via serial connection. Introduce a blacklist to reject ACPI serial devices that should not be claimed by serdev sub-system. Add the peripheral ids for Intel HS UART to the blacklist to bring back serial port on SoCs carrying them. Cc: [email protected] Signed-off-by: Punit Agrawal <[email protected]> Acked-by: Hans de Goede <[email protected]> Acked-by: Johan Hovold <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06Merge tag 'rtc-5.5-2' of ↵Linus Torvalds4-28/+50
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "A few fixes for this cycle. The CMOS AltCentury support broke a few platforms with a recent BIOS so I reverted it. The mt6397 fix is not that critical but good to have. And finally, the sun6i fix repairs WiFi and BT on a few platforms. Summary: - cmos: revert AltCentury support on AMD/Hygon - mt6397: fix alarm register overwrite - sun6i: ensure clock is working on R40" * tag 'rtc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform" rtc: mt6397: fix alarm register overwrite rtc: sun6i: Add support for RTC clocks on R40
2020-01-06Merge tag 'arc-5.5-rc6' of ↵Linus Torvalds4-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Kconfig warning, stale define, duplicate asm-offset entry ..." * tag 'arc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: pt_regs: remove hardcoded registers offset ARC: asm-offsets: remove duplicate entry ARC: mm: drop stale define of __ARCH_USE_5LEVEL_HACK arc: eznps: fix allmodconfig kconfig warning
2020-01-06arm64: Revert support for execute-only user mappingsCatalin Marinas4-17/+6
The ARMv8 64-bit architecture supports execute-only user permissions by clearing the PTE_USER and PTE_UXN bits, practically making it a mostly privileged mapping but from which user running at EL0 can still execute. The downside, however, is that the kernel at EL1 inadvertently reading such mapping would not trip over the PAN (privileged access never) protection. Revert the relevant bits from commit cab15ce604e5 ("arm64: Introduce execute-only page access permissions") so that PROT_EXEC implies PROT_READ (and therefore PTE_USER) until the architecture gains proper support for execute-only user mappings. Fixes: cab15ce604e5 ("arm64: Introduce execute-only page access permissions") Cc: <[email protected]> # 4.9.x- Acked-by: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-06tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQ's"Stefan Berger1-2/+0
There has been a bunch of reports (one from kernel bugzilla linked) reporting that when this commit is applied it causes on some machines boot freezes. Unfortunately hardware where this commit causes a failure is not widely available (only one I'm aware is Lenovo T490), which means we cannot predict yet how long it will take to properly fix tpm_tis interrupt probing. Thus, the least worst short term action is to revert the code to the state before this commit. In long term we need fix the tpm_tis probing code to work on machines that Stefan's fix was supposed to fix. Fixes: 21df4a8b6018 ("tpm_tis: reserve chip for duration of tpm_tis_core_init") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935 Cc: [email protected] Cc: Jerry Snitselaar <[email protected]> Cc: Dan Williams <[email protected]> Tested-by: Dan Williams <[email protected]> Tested-by: Xiaoping Zhou <[email protected]> Signed-off-by: Stefan Berger <[email protected]> Reported-by: Jerry Snitselaar <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2020-01-06tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts"Stefan Berger1-1/+0
There has been a bunch of reports (one from kernel bugzilla linked) reporting that when this commit is applied it causes on some machines boot freezes. Unfortunately hardware where this commit causes a failure is not widely available (only one I'm aware is Lenovo T490), which means we cannot predict yet how long it will take to properly fix tpm_tis interrupt probing. Thus, the least worst short term action is to revert the code to the state before this commit. In long term we need fix the tpm_tis probing code to work on machines that Stefan's fix was supposed to fix. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935 Fixes: 1ea32c83c699 ("tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts") Cc: [email protected] Cc: Jerry Snitselaar <[email protected]> Cc: Dan Williams <[email protected]> Tested-by: Dan Williams <[email protected]> Tested-by: Xiaoping Zhou <[email protected]> Signed-off-by: Stefan Berger <[email protected]> Reported-by: Jerry Snitselaar <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2020-01-06tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init"Jarkko Sakkinen1-18/+17
Revert a commit, which was included in Linux v5.5-rc3 because it did not properly fix the issues it was supposed to fix. Fixes: 21df4a8b6018 ("tpm_tis: reserve chip for duration of tpm_tis_core_init") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935 Cc: [email protected] Cc: Jerry Snitselaar <[email protected]> Cc: Dan Williams <[email protected]> Tested-by: Dan Williams <[email protected]> Tested-by: Xiaoping Zhou <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2020-01-06Merge tag 'asoc-fix-v5.5-rc5' of ↵Takashi Iwai8-28/+61
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.5 More fixes that have been collected, nothing super remarkable here - the few core fixes are mainly error handling related as are many of the driver fixes.
2020-01-06USB: Fix: Don't skip endpoint descriptors with maxpacket=0Alan Stern1-4/+8
It turns out that even though endpoints with a maxpacket length of 0 aren't useful for data transfer, the descriptors do serve other purposes. In particular, skipping them will also skip over other class-specific descriptors for classes such as UVC. This unexpected side effect has caused some UVC cameras to stop working. In addition, the USB spec requires that when isochronous endpoint descriptors are present in an interface's altsetting 0 (which is true on some devices), the maxpacket size _must_ be set to 0. Warning about such things seems like a bad idea. This patch updates an earlier commit which would log a warning and skip these endpoint descriptors. Now we only log a warning, and we don't even do that for isochronous endpoints in altsetting 0. We don't need to worry about preventing endpoints with maxpacket = 0 from ever being used for data transfers; usb_submit_urb() already checks for this. Reported-and-tested-by: Roger Whittaker <[email protected]> Fixes: d482c7bb0541 ("USB: Skip endpoints with 0 maxpacket length") Signed-off-by: Alan Stern <[email protected]> CC: Laurent Pinchart <[email protected]> Link: https://marc.info/?l=linux-usb&m=157790377329882&w=2 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-06i2c: bcm2835: Store pointer to bus clockStefan Wahren1-9/+8
The commit bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") introduced a NULL pointer dereference on driver unload. It seems that we can't fetch the bus clock via devm_clk_get in bcm2835_i2c_remove. As an alternative approach store a pointer to the bus clock in the private driver structure. Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") Signed-off-by: Stefan Wahren <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-01-06dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60Eugen Hristev1-2/+4
SAM9X60 also supports i2c-sda-hold-time-ns. Fix the documentation accordingly. Fixes: 2034e3f4c9a5 ("dt-bindings: i2c: at91: add new compatible") Signed-off-by: Eugen Hristev <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-01-06i2c: at91: fix clk_offset for sam9x60Eugen Hristev1-1/+1
In SAM9X60 datasheet, FLEX_TWI_CWGR register description mentions clock offset of 3 cycles (compared to 4 in eg. SAMA5D3). This is the same offset as in SAMA5D2. Fixes: b00277923743 ("i2c: at91: add new platform support for sam9x60") Suggested-by: Codrin Ciubotariu <[email protected]> Signed-off-by: Eugen Hristev <[email protected]> Acked-by: Ludovic Desroches <[email protected]> Reviewed-by: Codrin Ciubotariu <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-01-06netfilter: flowtable: add nf_flowtable_time_stampPablo Neira Ayuso4-10/+11
This patch adds nf_flowtable_time_stamp and updates the existing code to use it. This patch is also implicitly fixing up hardware statistic fetching via nf_flow_offload_stats() where casting to u32 is missing. Use nf_flow_timeout_delta() to fix this. Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support") Signed-off-by: Pablo Neira Ayuso <[email protected]> Acked-by: wenxu <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.