aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-07-29xfs: avoid the iolock in xfs_free_eofblocks for evicted inodesChristoph Hellwig1-14/+10
Same rational as the last patch - these inodes are not reachable, so don't bother with locking. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Rich Johnston <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2012-07-29xfs: do not take the iolock in xfs_inactiveChristoph Hellwig2-18/+15
An inode that enters xfs_inactive has been removed from all global lists but the inode hash, and can't be recycled in xfs_iget before it has been marked reclaimable. Thus taking the iolock in here is not nessecary at all, and given the amount of lockdep false positives it has triggered already I'd rather remove the locking. The only change outside of xfs_inactive is relaxing an assert in xfs_itruncate_extents. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Rich Johnston <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2012-07-29xfs: remove xfs_inactive_attrsChristoph Hellwig1-61/+36
Remove this helper as the code flow is a lot more obvious when it gets merged into its only caller. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Rich Johnston <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2012-07-29xfs: clean up xfs_inactiveChristoph Hellwig1-128/+43
The code to reserve log space and join the inode to the transaction is common for all cases, so don't duplicate it. Also remove the trivial xfs_inactive_symlink_local helper which can simply be opencode now. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Rich Johnston <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2012-07-29xfs: do not read the AGI buffer in xfs_dialloc until nessecaryChristoph Hellwig1-58/+69
Refactor the AG selection loop in xfs_dialloc to operate on the in-memory perag data as much as possible. We only read the AGI buffer once we have selected an AG to allocate inodes now instead of for every AG considered. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Reviewed-by: Mark Tinguely <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2012-07-29xfs: refactor xfs_ialloc_ag_selectChristoph Hellwig1-51/+44
Loop over the in-core perag structures and prefer using pagi_freecount over going out to the AGI buffer where possible. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Reviewed-by: Mark Tinguely <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2012-07-29xfs: add a short cut to xfs_dialloc for the non-NULL agbp caseChristoph Hellwig1-21/+26
In this case we already have selected an AG and know it has free space beause the buffer lock never got released. Jump directly into xfs_dialloc_ag and short cut the AG selection loop. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Reviewed-by: Mark Tinguely <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2012-07-29xfs: remove the alloc_done argument to xfs_diallocChristoph Hellwig5-19/+10
We can simplify check the IO_agbp pointer for being non-NULL instead of passing another argument through two layers of function calls. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Reviewed-by: Mark Tinguely <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2012-07-29xfs: split xfs_diallocChristoph Hellwig1-175/+174
Move the actual allocation once we have selected an allocation group into a separate helper, and make xfs_dialloc a wrapper around it. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Reviewed-by: Ben Myers <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2012-07-28Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds25-567/+693
Pull embedded i2c changes from Wolfram Sang: "Changes for the "embedded" part of the I2C subsystem: - lots of devicetree conversions of drivers (and preparations for that) - big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin - Rafael's struct dev_pm_ops conversion patches for I2C - usual driver cleanups and fixes All patches have been in linux-next for an apropriate time and all patches touching files outside of i2c-folders should have proper acks from the maintainers." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits) Revert "i2c: tegra: convert normal suspend/resume to *_noirq" I2C: MV64XYZ: Add Device Tree support i2c: stu300: use devm managed resources i2c: i2c-ocores: support for 16bit and 32bit IO V4L/DVB: mfd: use reg_shift instead of regstep i2c: i2c-ocores: Use reg-shift property i2c: i2c-ocores: DT bindings and minor fixes. i2c: mv64xxxx: remove EXPERIMENTAL tag i2c-s3c2410: Use plain pm_runtime_put() i2c: s3c2410: Fix pointer type passed to of_match_node() i2c: mxs: Set I2C timing registers for mxs-i2c i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file. i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data. i2c:i2c-bfin-twi: include twi head file i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load. i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly. i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves. i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios". i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios. i2c-mv64xxxx: allow more than one driver instance ... Conflicts: drivers/i2c/busses/i2c-nomadik.c
2012-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds10-28/+36
Pull networking fixes from David Miller: "Several bug fixes, some to new features appearing in this merge window, some that have been around for a while. I have a short list of known problems that need to be sorted out, but all of them can be solved easily during the run up to 3.6-final. I'll be offline until Sunday afternoon, but nothing need hold up 3.6-rc1 and the close of the merge window, networking wise, at this point. 1) Fix interface check in ipv4 TCP early demux, from Eric Dumazet. 2) Fix a long standing bug in TCP DMA to userspace offload that can hang applications using MSG_TRUNC, from Jiri Kosina. 3) Don't allow TCP_USER_TIMEOUT to be negative, from Hangbin Liu. 4) Don't use GFP_KERNEL under spinlock in kaweth driver, from Dan Carpenter" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: perform DMA to userspace only if there is a task waiting for it Revert "openvswitch: potential NULL deref in sample()" ipv4: fix TCP early demux net: fix rtnetlink IFF_PROMISC and IFF_ALLMULTI handling USB: kaweth.c: use GFP_ATOMIC under spin_lock tcp: Add TCP_USER_TIMEOUT negative value check bcma: add missing iounmap on error path bcma: fix regression in interrupt assignment on mips mac80211_hwsim: fix possible race condition in usage of info->control.sta & control.vif
2012-07-28thinkpad_acpi: Free hotkey_keycode_map after unregistering tpacpi_inputdevLi Dongyang1-2/+1
We should free hotkey_keycode_map after unregistering tpacpi_inputdev, to aviod use after free like this: [ 99.408388] ============================================================================= [ 99.408393] BUG kmalloc-64 (Not tainted): Poison overwritten [ 99.408394] ----------------------------------------------------------------------------- [ 99.408394] [ 99.408398] INFO: 0xf2751962-0xf2751995. First byte 0x98 instead of 0x6b [ 99.408402] INFO: Allocated in 0xfdc88c28 age=79 cpu=0 pid=1329 [ 99.408407] __slab_alloc.isra.50.constprop.56+0x49f/0x533 [ 99.408410] kmem_cache_alloc_trace+0x10d/0x140 [ 99.408412] 0xfdc88c28 [ 99.408414] 0xfdc898cc [ 99.408417] do_one_initcall+0x112/0x160 [ 99.408420] sys_init_module+0xe6d/0x1bc0 [ 99.408422] sysenter_do_call+0x12/0x28 [ 99.408427] INFO: Freed in hotkey_exit+0x50/0xb0 [thinkpad_acpi] age=14 cpu=1 pid=1333 [ 99.408429] __slab_free+0x3d/0x30b [ 99.408431] kfree+0x129/0x140 [ 99.408435] hotkey_exit+0x50/0xb0 [thinkpad_acpi] [ 99.408438] ibm_exit+0xe3/0x1a0 [thinkpad_acpi] [ 99.408441] thinkpad_acpi_module_exit+0x35/0x208 [thinkpad_acpi] [ 99.408443] sys_delete_module+0x11f/0x280 [ 99.408445] sysenter_do_call+0x12/0x28 [ 99.408447] INFO: Slab 0xf4d5ea20 objects=17 used=17 fp=0x (null) flags=0x40000080 [ 99.408449] INFO: Object 0xf2751960 @offset=2400 fp=0xf2751780 [ 99.408449] [ 99.408452] Bytes b4 f2751950: 64 02 00 00 ae ce fe ff 5a 5a 5a 5a 5a 5a 5a 5a d.......ZZZZZZZZ [ 99.408454] Object f2751960: 6b 6b 98 00 ec 00 8e 00 ee 00 6b 6b e3 00 bf 00 kk........kk.... [ 99.408456] Object f2751970: c2 00 6b 6b 6b 6b cd 00 6b 6b 6b 6b 6b 6b e1 00 ..kkkk..kkkkkk.. [ 99.408458] Object f2751980: e0 00 e4 00 6b 6b 74 01 73 00 72 00 71 00 94 00 ....kkt.s.r.q... [ 99.408460] Object f2751990: 6b 6b 6b 6b f8 00 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkk..kkkkkkkkk. [ 99.408462] Redzone f27519a0: bb bb bb bb .... Signed-off-by: Li Dongyang <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28thinkpad_acpi: Fix a memory leak during module exitLi Dongyang1-0/+1
We should free the thinkpad_id.nummodel_str during exit as it's allocated in get_thinkpad_module_data(). Signed-off-by: Li Dongyang <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28thinkpad_acpi: Flush the workqueue before freeing tpacpi_ledsLi Dongyang1-0/+1
We init work_struct within tpacpi_leds, and we should free tpacpi_leds after the workqueue is empty, in case of the work_struct is referenced after free. This script could trigger the OOPS: #!/bin/sh while true do modprobe -r thinkpad_acpi modprobe thinkpad_acpi done And the OOPS looks like this: [ 73.863557] BUG: unable to handle kernel paging request at 45440000 [ 73.863925] IP: [<c1051d65>] process_one_work+0x25/0x3b0 [ 73.864749] *pde = 00000000 [ 73.865571] Oops: 0000 [#1] PREEMPT SMP [ 73.866443] Modules linked in: thinkpad_acpi(-) nvram netconsole configfs aes_i586 cryptd aes_generic joydev btusb bluetooth arc4 snd_hda_codec_analog iwl4965 uhci_hcd pcmcia microcode iwlegacy mac80211 cfg80211 firewire_ohci firewire_core kvm_intel kvm snd_hda_intel acpi_cpufreq mperf ehci_hcd yenta_socket pcmcia_rsrc crc_itu_t sr_mod snd_hda_codec processor pcmcia_core i2c_i801 usbcore lpc_ich cdrom serio_raw psmouse coretemp rfkill e1000e snd_pcm snd_page_alloc snd_hwdep snd_timer snd pcspkr evdev ac battery thermal soundcore usb_common intel_agp intel_gtt tp_smapi(O) thinkpad_ec(O) ext4 crc16 jbd2 mbcache sd_mod ata_piix ahci libahci libata scsi_mod nouveau button video mxm_wmi wmi i2c_algo_bit drm_kms_helper ttm drm agpgart i2c_core [last unloaded: nvram] [ 73.866676] [ 73.866676] Pid: 62, comm: kworker/u:4 Tainted: G O 3.5.0-1-ARCH #1 LENOVO 7662CTO/7662CTO [ 73.866676] EIP: 0060:[<c1051d65>] EFLAGS: 00010002 CPU: 1 [ 73.866676] EIP is at process_one_work+0x25/0x3b0 [ 73.866676] EAX: 45440065 EBX: f5545090 ECX: 00000088 EDX: 45440000 [ 73.866676] ESI: f568ff40 EDI: c164dd40 EBP: f5705f98 ESP: f5705f68 [ 73.866676] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 73.866676] CR0: 8005003b CR2: 45440000 CR3: 357ed000 CR4: 000007d0 [ 73.866676] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 73.866676] DR6: ffff0ff0 DR7: 00000400 [ 73.866676] Process kworker/u:4 (pid: 62, ti=f5704000 task=f5700540 task.ti=f5704000) [ 73.866676] Stack: [ 73.866676] f56fbf24 00000001 f5705f78 c10683e0 c1294950 00000000 00000000 f568ff40 [ 73.866676] 00000000 f568ff40 f568ff50 c164dd40 f5705fb8 c1052589 c1060c7e c15b9300 [ 73.866676] c164dd40 00000000 f568ff40 c1052490 f5705fe4 c10570b2 00000000 f568ff40 [ 73.866676] Call Trace: [ 73.866676] [<c10683e0>] ? default_wake_function+0x10/0x20 [ 73.866676] [<c1294950>] ? dev_get_drvdata+0x20/0x20 [ 73.866676] [<c1052589>] worker_thread+0xf9/0x280 [ 73.866676] [<c1060c7e>] ? complete+0x4e/0x60 [ 73.866676] [<c1052490>] ? manage_workers.isra.24+0x1c0/0x1c0 [ 73.866676] [<c10570b2>] kthread+0x72/0x80 [ 73.866676] [<c1057040>] ? kthread_freezable_should_stop+0x50/0x50 [ 73.866676] [<c13c20fe>] kernel_thread_helper+0x6/0x10 [ 73.866676] Code: bc 27 00 00 00 00 55 89 e5 57 56 53 83 ec 24 3e 8d 74 26 00 89 c6 8b 02 89 d3 c7 45 f0 00 00 00 00 89 c2 30 d2 a8 04 0f 44 55 f0 <8b> 02 89 55 f0 89 da c1 ea 0a 89 45 ec 89 d8 8b 4d ec c1 e8 04 [ 73.866676] EIP: [<c1051d65>] process_one_work+0x25/0x3b0 SS:ESP 0068:f5705f68 [ 73.866676] CR2: 0000000045440000 [ 73.866676] ---[ end trace 4d8a1887edca08c5 ]--- [ 73.866676] note: kworker/u:4[62] exited with preempt_count 1 Signed-off-by: Li Dongyang <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28dell-laptop: Add 6 machines to touchpad led quirkAceLan Kao1-0/+54
Add the following machines into quirk, Isnpiron 5420, Isnpiron 5520, Isnpiron 5720, Isnpiron 7420, Isnpiron 7520, Isnpiron 7720 Signed-off-by: AceLan Kao <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28ACER: Fix Smatch double-free issueMarek Vasut1-1/+0
The patch 6ae3a0876185: "ACER: Add support for accelerometer sensor" from Jun 1, 2012, leads to the following Smatch warning: drivers/platform/x86/acer-wmi.c:1886 acer_wmi_accel_destroy() error: don't call input_free_device() after input_unregister_device() drivers/platform/x86/acer-wmi.c 1883 static void acer_wmi_accel_destroy(void) 1884 { 1885 input_unregister_device(acer_wmi_accel_dev); 1886 input_free_device(acer_wmi_accel_dev); 1887 } Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Fengguang Wu <[email protected]> Cc: joeyli <[email protected]> Cc: Dan Carpenter <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28ACER: Fix up sparse warningMarek Vasut1-1/+1
drivers/platform/x86/acer-wmi.c:1836:18: sparse: Using plain integer as NULL pointer drivers/platform/x86/acer-wmi.c:1836: 1833 1834 BUG_ON(!name || !ah); 1835 > 1836 handle = 0; 1837 status = acpi_get_devices(prop, acer_wmi_get_handle_cb, 1838 (void *)name, &handle); 1839 Reported-by: Fengguang Wu <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Fengguang Wu <[email protected]> Cc: joeyli <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28asus-nb-wmi: add some video toggle keysAceLan Kao1-0/+4
There are some new video switch keys that used by newer machines. 0xA0 - SDSP HDMI only 0xA1 - SDSP LCD + HDMI 0xA2 - SDSP CRT + HDMI 0xA3 - SDSP TV + HDMI But in Linux, there is no suitable userspace application to handle this, so, mapping them all to KEY_SWITCHVIDEOMODE. Signed-off-by: AceLan Kao <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28asus-nb-wmi: add wapf quirk for ASUS machinesAceLan Kao1-3/+101
The BIOS of these machines will try to enable/disable wifi/bt in their own sqeuence. It won't read the enable/disable parameter in WMI command, but just iterates the wifi/bt's status described below 1st. enable wifi, enable bt 2nd. disable wifi, enable bt 3rd. enable wifi, disable bt 4th. disable wifi, disable bt That will totally mess up the rfkill status, since we will try to read wifi and bt's status and reset it again while booting up. To avoid this, these machines should set the wapf value to 4, that will let software totally control the wifi/bt's status and BIOS will do nothing instead of sending out the 0x88(KEY_RFKILL) event instead of 0x5e(wifi enable), 0x5f(wifi diable), 0x7d(bt enable), and 0x7e(bt disable) through WMI. With this patch[1], it will handle the KEY_RFKILL event correctly and will block/unblock wifi and bt together. 1. https://lkml.org/lkml/2012/5/21/75 Signed-off-by: AceLan Kao <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28classmate-laptop: Fix extra keys hardware id.Miguel Gómez1-1/+1
Since ACPI devices ids were changed to use always upper-case letters, the ACPI id of the extra keys (FNBT0000) was not maching the one defined in the driver (FnBT0000), causing the extra keys not to work. The patch replaces the driver id with the one reported by ACPI, fixing the problem. Signed-off-by: Miguel Gómez <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28classmate-laptop: Add support for Classmate V4 accelerometer.Miguel Gómez1-2/+401
Classmate V4 laptop includes a new accelerometer that can't be handled by previous driver. This patch adds a new driver to handle it. [mjg: Fixed up the driver pm stuff] Signed-off-by: Miguel Gómez <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28asus-wmi: enable resume on lid openAceLan Kao2-0/+14
According to the ASUS WMI spec., to enable resume on lid open should use the device ID(0x00120032), but it doesn't work indeed. After discussing with ASUS' BIOS engineer, they say wake on lid open doesn't have a uniq device ID(0x00120032) in the BIOS. It shares the same device ID with deep S3(0x00120031), and the deep S3(resume on lid open) is disable by default. Adding this option in asus wmi sysfs /sys/devices/platform/<platform>/lid_resume so that userspace apps can enable/disable this feature by themselves. Signed-off-by: AceLan Kao <[email protected]> Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28asus-wmi: control backlight power through WMI, not ACPIAceLan Kao3-1/+34
BugLink: https://bugs.launchpad.net/bugs/1000146 Some h/w that can adjust screen brightness through ACPI functions, but can't turn on/off the backlight power correctly. So, we list those h/w in quirks and try to turn on/off the backlight power through WMI. Signed-off-by: AceLan Kao <[email protected]> Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28samsung-laptop: support R40/R41Corentin Chary1-0/+9
> Chassis Information > Manufacturer: SAMSUNG ELECTRONICS CO., LTD. > Type: Other Type should be "Notebook", "Laptop", .. not "Other". Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28acpi/video_detect: blacklist samsung x360Corentin Chary1-0/+29
On Samsung X360, the BIOS will set a flag (VDRV) if the generic ACPI backlight device is used. This flag will definitively break the backlight interface (even the vendor interface) untill next reboot. It's why we should prevent video.ko from being used here and we can't rely on a later call to acpi_video_unregister(). Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28samsung-laptop: X360 ACPI backlight device is brokenCorentin Chary1-0/+10
Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28drivers-platform-x86: use acpi_video_dmi_promote_vendor()Corentin Chary3-17/+27
Instead of using directly acpi_video_unregister(), use acpi_video_dmi_promote_vendor() (and make it call acpi_video_unregister() if needed) Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28acpi: add a way to promote/demote vendor backlight driversCorentin Chary2-2/+39
Instead of adding a big blacklist in video_detect.c to set ACPI_VIDEO_BACKLIGHT_DMI_VENDOR correctly, let external modules promote or demote themselves when they know the generic video module won't work. Currently drivers where using acpi_video_unregister() directly but: - That didn't respect any acpi_backlight=[video|vendor] parameter provided by the user. - Any later call to acpi_video_register() would still re-load the generic video module (and some gpu drivers are doing that). This patch fix those two issues. Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28ACER: Add support for accelerometer sensorMarek Vasut1-0/+138
This device is present on Iconia Tab W500. Signed-off-by: Marek Vasut <[email protected]> Cc: joeyli <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2012-07-28asus-wmi: use ASUS_WMI_METHODID_DSTS2 as default DSTS ID.Alex Hung1-6/+1
According to responses from the BIOS team, ASUS_WMI_METHODID_DSTS2 (0x53545344) will be used as future DSTS ID. In addition, calling asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS2, 0, 0, NULL) returns ASUS_WMI_UNSUPPORTED_METHOD in new ASUS laptop PCs. This patch fixes no DSTS ID will be assigned in this case. Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Matthew Garrett <[email protected]> Cc: [email protected]
2012-07-27Merge tag 'ext4_for_linus' of ↵Linus Torvalds14-196/+563
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "The usual collection of bug fixes and optimizations. Perhaps of greatest note is a speed up for parallel, non-allocating DIO writes, since we no longer take the i_mutex lock in that case. For bug fixes, we fix an incorrect overhead calculation which caused slightly incorrect results for df(1) and statfs(2). We also fixed bugs in the metadata checksum feature." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: undo ext4_calc_metadata_amount if we fail to claim space ext4: don't let i_reserved_meta_blocks go negative ext4: fix hole punch failure when depth is greater than 0 ext4: remove unnecessary argument from __ext4_handle_dirty_metadata() ext4: weed out ext4_write_super ext4: remove unnecessary superblock dirtying ext4: convert last user of ext4_mark_super_dirty() to ext4_handle_dirty_super() ext4: remove useless marking of superblock dirty ext4: fix ext4 mismerge back in January ext4: remove dynamic array size in ext4_chksum() ext4: remove unused variable in ext4_update_super() ext4: make quota as first class supported feature ext4: don't take the i_mutex lock when doing DIO overwrites ext4: add a new nolock flag in ext4_map_blocks ext4: split ext4_file_write into buffered IO and direct IO ext4: remove an unused statement in ext4_mb_get_buddy_page_lock() ext4: fix out-of-date comments in extents.c ext4: use s_csum_seed instead of i_csum_seed for xattr block ext4: use proper csum calculation in ext4_rename ext4: fix overhead calculation used by ext4_statfs() ...
2012-07-27Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds69-754/+964
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
2012-07-27Merge branches 'audit', 'delay', 'fixes', 'misc' and 'sta2x11' into for-linusRussell King69-754/+964
2012-07-27Merge branch 'for-davem' of ↵David S. Miller3-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== These fixes are intended for the 3.6 stream. Hauke Mehrtens provides a pair of bcma fixes, one to fix a build regression on mips and another to correct a pair of missing iounmap calls. Thomas Huehn offers a mac80211_hwsim fix to avoid a possible use-after-free bug. ==================== Signed-off-by: David S. Miller <[email protected]>
2012-07-27hwmon: (applesmc) Decode and act on read/write status codesHenrik Rydberg1-24/+46
The behavior of the SMC has changed several times over the years, causing read failures in the driver. It seems the problem can be explained by a shift in SMC speed combined with improper action on status codes. We should first wait for the SMC to settle, which was the most frequent response on the old slow machines. Then, if the SMC is busy, we need to try again later by resending the command. This was the most likely response until 2012. Now, with a shorter wait time, we are again most likely to poll while the SMC is settling, and as a result we see high failure rates on many old and new models. With the distinction between busy and failure, we can also wait longer before retrying, without sacrificing speed. This seems to bring failures down to virtually zero on all models. Tested on: MBA1,1 MBA3,1 MBA5,1 MBA5,2 MBP9,2 Tested-by: Adam Somerville <[email protected]> Tested-by: Hubert Eichner <[email protected]> Signed-off-by: Henrik Rydberg <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2012-07-27hwmon: (jc42) Don't reset hysteresis on device removalJean Delvare1-3/+10
Restoring the configuration register on device removal has the side effect of also resetting the hysteresis value. This is inconsistent as the other limits are not reset, only hysteresis. So, following the principle of least surprise, preserve the hysteresis value when restoring the configuration register. Signed-off-by: Jean Delvare <[email protected]> Cc: Guenter Roeck <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2012-07-27hwmon: (jc42) Simplify hysteresis maskJean Delvare1-7/+6
Define JC42_CFG_HYST_MASK as the mask _before_ shifting instead of after shifting. This simplifies the current code slightly, and will simplify the code to come even more. Signed-off-by: Jean Delvare <[email protected]> Cc: Guenter Roeck <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2012-07-27hwmon: (acpi_power_meter) Fix build warningGuenter Roeck1-0/+4
Commit c5dec0182256361a3f823316e8fb85263f76efe7 (acpi_power_meter: Use struct dev_pm_ops for power management) introduced the following build warning. It is seen if CONFIG_PM_SLEEP is not defined. acpi_power_meter.c:930:12: warning: acpi_power_meter_resume defined but not used Fix it. Cc: Rafael J. Wysocki <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]>
2012-07-27tcp: perform DMA to userspace only if there is a task waiting for itJiri Kosina1-1/+3
Back in 2006, commit 1a2449a87b ("[I/OAT]: TCP recv offload to I/OAT") added support for receive offloading to IOAT dma engine if available. The code in tcp_rcv_established() tries to perform early DMA copy if applicable. It however does so without checking whether the userspace task is actually expecting the data in the buffer. This is not a problem under normal circumstances, but there is a corner case where this doesn't work -- and that's when MSG_TRUNC flag to recvmsg() is used. If the IOAT dma engine is not used, the code properly checks whether there is a valid ucopy.task and the socket is owned by userspace, but misses the check in the dmaengine case. This problem can be observed in real trivially -- for example 'tbench' is a good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they have been already early-copied in tcp_rcv_established() using dma engine. This patch introduces the same check we are performing in the simple iovec copy case to the IOAT case as well. It fixes the indefinite recvmsg(MSG_TRUNC) hangs. Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-27Revert "openvswitch: potential NULL deref in sample()"Jesse Gross1-3/+0
This reverts commit 5b3e7e6cb5771bedda51cdb6f715d1da8cd9e644. The problem that the original commit was attempting to fix can never happen in practice because validation is done one a per-flow basis rather than a per-packet basis. Adding additional checks at runtime is unnecessary and inconsistent with the rest of the code. CC: Dan Carpenter <[email protected]> Signed-off-by: Jesse Gross <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-27ipv4: fix TCP early demuxEric Dumazet3-8/+8
commit 92101b3b2e317 (ipv4: Prepare for change of rt->rt_iif encoding.) invalidated TCP early demux, because rx_dst_ifindex is not properly initialized and checked. Also remove the use of inet_iif(skb) in favor or skb->skb_iif Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-27net: fix rtnetlink IFF_PROMISC and IFF_ALLMULTI handlingJiri Benc1-1/+7
When device flags are set using rtnetlink, IFF_PROMISC and IFF_ALLMULTI flags are handled specially. Function dev_change_flags sets IFF_PROMISC and IFF_ALLMULTI bits in dev->gflags according to the passed value but do_setlink passes a result of rtnl_dev_combine_flags which takes those bits from dev->flags. This can be easily trigerred by doing: tcpdump -i eth0 & ip l s up eth0 ip sets IFF_UP flag in ifi_flags and ifi_change, which is combined with IFF_PROMISC by rtnl_dev_combine_flags, causing __dev_change_flags to set IFF_PROMISC in gflags. Reported-by: Max Matveev <[email protected]> Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-27USB: kaweth.c: use GFP_ATOMIC under spin_lockDan Carpenter1-1/+1
The problem is that we call this with a spin lock held. The call tree is: kaweth_start_xmit() holds kaweth->device_lock. -> kaweth_async_set_rx_mode() -> kaweth_control() -> kaweth_internal_control_msg() The kaweth_internal_control_msg() function is only called from kaweth_control() which used GFP_ATOMIC for its allocations. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-27tcp: Add TCP_USER_TIMEOUT negative value checkHangbin Liu1-1/+4
TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative values. If a user assign -1 to it, the socket will set successfully and wait for 4294967295 miliseconds. This patch add a negative value check to avoid this issue. Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-27Merge tag 'tty-3.6-rc1' of ↵Linus Torvalds9-38/+93
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY/Serial patches from Greg Kroah-Hartman: "Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and serial drivers. They were cherry-picked from the tty-next branch of the tty git tree, as they are small and "obvious" fixes. The larger changes, as mentioned before, will be saved for the 3.7-rc1 merge window. All of these changes have been in the linux-next releases for quite a while. Signed-off-by: Greg Kroah-Hartman <[email protected]>" * tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pch_uart: Fix parity setting issue pch_uart: Fix rx error interrupt setting issue pch_uart: Fix missing break for 16 byte fifo tty ldisc: Close/Reopen race prevention should check the proper flag pch_uart: Add eg20t_port lock field, avoid recursive spinlocks vt: fix race in vt_waitactive() serial/of-serial: Add LPC3220 standard UART compatible string serial/8250: Add LPC3220 standard UART type serial_core: Update buffer overrun statistics. serial: samsung: Fixed wrong comparison for baudclk_rate
2012-07-27Merge branch 'kmap_atomic' of git://github.com/congwang/linuxLinus Torvalds18-283/+44
Pull final kmap_atomic cleanups from Cong Wang: "This should be the final round of cleanup, as the definitions of enum km_type finally get removed from the whole tree. The patches have been in linux-next for a long time." * 'kmap_atomic' of git://github.com/congwang/linux: pipe: remove KM_USER0 from comments vmalloc: remove KM_USER0 from comments feature-removal-schedule.txt: remove kmap_atomic(page, km_type) tile: remove km_type definitions um: remove km_type definitions asm-generic: remove km_type definitions avr32: remove km_type definitions frv: remove km_type definitions powerpc: remove km_type definitions arm: remove km_type definitions highmem: remove the deprecated form of kmap_atomic tile: remove usage of enum km_type frv: remove the second parameter of kmap_atomic_primary() jbd2: remove the second argument of kmap_atomic
2012-07-27Merge branch 'merge' of ↵Linus Torvalds8-124/+128
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Here's a handful of powerpc patches, a couple of regression fixes for problems introduced in the main batch in this merge window, a couple of defconfig updates, and some trivials. The radeonfb one is something that was long standing in SLES which I forgot to pickup earlier." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ftrace: Trace function graph entry before updating index radeonfb: Add quirk for the graphics adapter in some JSxx powerpc: Lack of firmware flash support is not an error powerpc: Enable pseries hardware RNG and crypto modules powerpc: Update g5_defconfig powerpc/kvm/bookehv: Fix build regression powerpc: Set stack limit properly in crit_transfer_to_handler
2012-07-27Merge tag 'cpumask-for-linus' of ↵Linus Torvalds3-3/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus Pull cpumask changes from Rusty Russell: "Trivial comment changes to cpumask code. I guess it's getting boring." Boring is good. * tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: cpumask: cpulist_parse() comments correction init: add comments to keep initcall-names in sync with initcall levels cpumask: add a few comments of cpumask functions
2012-07-27Merge branch 'master' of ↵John W. Linville3-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-07-27dm thin: commit before gathering statusAlasdair G Kergon15-20/+35
Commit outstanding metadata before returning the status for a dm thin pool so that the numbers reported are as up-to-date as possible. The commit is not performed if the device is suspended or if the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target through a new 'status_flags' parameter in the target's dm_status_fn. The userspace dmsetup tool will support the --noflush flag with the 'dmsetup status' and 'dmsetup wait' commands from version 1.02.76 onwards. Tested-by: Mike Snitzer <[email protected]> Signed-off-by: Alasdair G Kergon <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.