aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-02-01KVM: x86: Supplement __cr4_reserved_bits() with X86_FEATURE_PCID checkVitaly Kuznetsov1-0/+2
Commit 7a873e455567 ("KVM: selftests: Verify supported CR4 bits can be set before KVM_SET_CPUID2") reveals that KVM allows to set X86_CR4_PCIDE even when PCID support is missing: ==== Test Assertion Failure ==== x86_64/set_sregs_test.c:41: rc pid=6956 tid=6956 - Invalid argument 1 0x000000000040177d: test_cr4_feature_bit at set_sregs_test.c:41 2 0x00000000004014fc: main at set_sregs_test.c:119 3 0x00007f2d9346d041: ?? ??:0 4 0x000000000040164d: _start at ??:? KVM allowed unsupported CR4 bit (0x20000) Add X86_FEATURE_PCID feature check to __cr4_reserved_bits() to make kvm_is_valid_cr4() fail. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-01KVM/x86: assign hva with the right value to vm_munmap the pagesZheng Zhan Liang1-1/+1
Cc: Paolo Bonzini <[email protected]> Cc: Wanpeng Li <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Zheng Zhan Liang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-01KVM: x86: Allow guests to see MSR_IA32_TSX_CTRL even if tsx=offPaolo Bonzini2-13/+30
Userspace that does not know about KVM_GET_MSR_FEATURE_INDEX_LIST will generally use the default value for MSR_IA32_ARCH_CAPABILITIES. When this happens and the host has tsx=on, it is possible to end up with virtual machines that have HLE and RTM disabled, but TSX_CTRL available. If the fleet is then switched to tsx=off, kvm_get_arch_capabilities() will clear the ARCH_CAP_TSX_CTRL_MSR bit and it will not be possible to use the tsx=off hosts as migration destinations, even though the guests do not have TSX enabled. To allow this migration, allow guests to write to their TSX_CTRL MSR, while keeping the host MSR unchanged for the entire life of the guests. This ensures that TSX remains disabled and also saves MSR reads and writes, and it's okay to do because with tsx=off we know that guests will not have the HLE and RTM features in their CPUID. (If userspace sets bogus CPUID data, we do not expect HLE and RTM to work in guests anyway). Cc: [email protected] Fixes: cbbaa2727aa3 ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES") Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-01SUNRPC: Fix NFS READs that start at non-page-aligned offsetsChuck Lever1-3/+4
Anj Duvnjak reports that the Kodi.tv NFS client is not able to read video files from a v5.10.11 Linux NFS server. The new sendpage-based TCP sendto logic was not attentive to non- zero page_base values. nfsd_splice_read() sets that field when a READ payload starts in the middle of a page. The Linux NFS client rarely emits an NFS READ that is not page- aligned. All of my testing so far has been with Linux clients, so I missed this one. Reported-by: A. Duvnjak <[email protected]> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211471 Fixes: 4a85a6a3320b ("SUNRPC: Handle TCP socket sends with kernel_sendpage() again") Signed-off-by: Chuck Lever <[email protected]> Tested-by: A. Duvnjak <[email protected]>
2021-02-01mac80211: fix station rate table updates on assocFelix Fietkau2-2/+6
If the driver uses .sta_add, station entries are only uploaded after the sta is in assoc state. Fix early station rate table updates by deferring them until the sta has been uploaded. Cc: [email protected] Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] [use rcu_access_pointer() instead since we won't dereference here] Signed-off-by: Johannes Berg <[email protected]>
2021-02-01usb: xhci-mtk: skip dropping bandwidth of unchecked endpointsChunfeng Yun2-29/+36
For those unchecked endpoints, we don't allocate bandwidth for them, so no need free the bandwidth, otherwise will decrease the allocated bandwidth. Meanwhile use xhci_dbg() instead of dev_dbg() to print logs and rename bw_ep_list_new as bw_ep_chk_list. Fixes: 1d69f9d901ef ("usb: xhci-mtk: fix unreleased bandwidth data") Cc: stable <[email protected]> Reviewed-and-tested-by: Ikjoon Jang <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-02-01usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop()Yoshihiro Shimoda1-0/+1
Should clear the pipe running flag in usbhs_pkt_pop(). Otherwise, we cannot use this pipe after dequeue was called while the pipe was running. Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Reported-by: Tho Vu <[email protected]> Signed-off-by: Yoshihiro Shimoda <[email protected]> Link: https://lore.kernel.org/r/1612183640-8898-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-02-01Merge tag 'thunderbolt-for-v5.11-rc7' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fix for v5.11-rc7 A single fix for a possible NULL pointer dereference when adding device links from ACPI description. * tag 'thunderbolt-for-v5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Fix possible NULL pointer dereference in tb_acpi_add_link()
2021-02-01gpio: gpiolib: remove shadowed variableWolfram Sang1-1/+1
After refactoring, we had two variables for the same thing. Remove the second declaration, one is enough here. Found by cppcheck. drivers/gpio/gpiolib.c:2551:17: warning: Local variable 'ret' shadows outer variable [shadowVariable] Fixes: d377f56f34f5 ("gpio: gpiolib: Normalize return code variable name") Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-02-01mmc: sdhci-pltfm: Fix linking err for sdhci-brcmstbUlf Hansson1-1/+6
The implementation of sdhci_pltfm_suspend() is only available when CONFIG_PM_SLEEP is set, which triggers a linking error: "undefined symbol: sdhci_pltfm_suspend" when building sdhci-brcmstb.c. Fix this by implementing the missing stubs when CONFIG_PM_SLEEP is unset. Reported-by: Arnd Bergmann <[email protected]> Suggested-by: Florian Fainelli <[email protected]> Fixes: 5b191dcba719 ("mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend") Cc: [email protected] Tested-By: Nicolas Schichan <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2021-02-01mmc: core: Limit retries when analyse of SDIO tuples failsFengnan Chang1-0/+6
When analysing tuples fails we may loop indefinitely to retry. Let's avoid this by using a 10s timeout and bail if not completed earlier. Signed-off-by: Fengnan Chang <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2021-02-01kbuild: remove PYTHON variableMasahiro Yamada6-7/+6
Python retired in 2020, and some distributions do not provide the 'python' command any more. As in commit 51839e29cb59 ("scripts: switch explicitly to Python 3"), we need to use more specific 'python3' to invoke scripts even if they are written in a way compatible with both Python 2 and 3. This commit removes the variable 'PYTHON', and switches the existing users to 'PYTHON3'. BTW, PEP 394 (https://www.python.org/dev/peps/pep-0394/) is a helpful material. Signed-off-by: Masahiro Yamada <[email protected]>
2021-01-31Linux 5.11-rc6Linus Torvalds1-1/+1
2021-01-31platform/x86: dell-wmi-sysman: fix a NULL pointer dereferenceMario Limonciello1-1/+5
An upcoming Dell platform is causing a NULL pointer dereference in dell-wmi-sysman initialization. Validate that the input from BIOS matches correct ACPI types and abort module initialization if it fails. Signed-off-by: Mario Limonciello <[email protected]> Tested-by: Perry Yuan <[email protected]> Link: https://lore.kernel.org/r/[email protected] [[email protected]: Drop redundant release_attributes_data() call] Signed-off-by: Hans de Goede <[email protected]>
2021-01-31Merge tag 'efi-urgent-for-v5.11' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Borislav Petkov: "A single fix from Lukas: handle boolean device properties imported from Apple firmware correctly" * tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/apple-properties: Reinstate support for boolean properties
2021-01-31Merge tag 'x86_entry_for_v5.11_rc6' of ↵Linus Torvalds3-10/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: "A single fix for objtool to generate proper unwind info for newer toolchains which do not generate section symbols anymore. And a cleanup ontop. This was originally going to go during the next merge window but people can already trigger a build error with binutils-2.36 which doesn't emit section symbols - something which objtool relies on - so let's expedite it" * tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument x86/entry: Emit a symbol for register restoring thunk
2021-01-31Merge tag 'timers-urgent-2021-01-31' of ↵Linus Torvalds2-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A fix for handling advertised, but non-existent 146818 RTCs correctly. With the recent UIP handling changes the time readout of non-existent RTCs hangs forever as the read returns always 0xFF which means the UIP bit is set. Sanity check the RTC before registering by checking the RTC_VALID register for correctness" * tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: mc146818: Detect and handle broken RTCs
2021-01-31Merge tag 'core-urgent-2021-01-31' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull single stepping fix from Thomas Gleixner: "A single fix for the single step reporting regression caused by getting the condition wrong when moving SYSCALL_EMU away from TIF flags" [ There's apparently another problem too, fix pending ] * tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Unbreak single step reporting behaviour
2021-01-31Merge tag 'powerpc-5.11-6' of ↵Linus Torvalds1-12/+16
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for a bug in our soft interrupt masking, which could lead to interrupt replaying recursing, causing spurious interrupts. Thanks to Nicholas Piggin" * tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt
2021-01-31Merge branch 'i2c/for-current' of ↵Linus Torvalds1-3/+16
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Just one I2C driver update this time" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mediatek: Move suspend and resume handling to NOIRQ phase
2021-01-31Merge branch 'for-rc-5.11' of ↵Linus Torvalds9-8/+542
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED fixes from Pavel Machek: "This pull is due to 'leds: trigger: fix potential deadlock with libata' -- people find the warn annoying. It also contains new driver and two trivial fixes" * 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon
2021-01-31Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds5-85/+93
Pull NFS client fixes from Trond Myklebust: - SUNRPC: Handle 0 length opaque XDR object data properly - Fix a layout segment leak in pnfs_layout_process() - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn - pNFS/NFSv4: Improve rejection of out-of-order layouts - pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() * tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Handle 0 length opaque XDR object data properly SUNRPC: Move simple_get_bytes and simple_get_netobj into private header pNFS/NFSv4: Improve rejection of out-of-order layouts pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
2021-01-31USB: gadget: legacy: fix an error code in eth_bind()Dan Carpenter1-1/+3
This code should return -ENOMEM if the allocation fails but it currently returns success. Fixes: 9b95236eebdb ("usb: gadget: ether: allocate and init otg descriptor by otg capabilities") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/YBKE9rqVuJEOUWpW@mwanda Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-31leds: rt8515: Add Richtek RT8515 LED driverLinus Walleij5-0/+421
This adds a driver for the Richtek RT8515 dual channel torch/flash white LED driver. This LED driver is found in some mobile phones from Samsung such as the GT-S7710 and GT-I8190. A V4L interface is added. We do not have a proper datasheet for the RT8515 but it turns out that RT9387A has a public datasheet and is essentially the same chip. We designed the driver in accordance with this datasheet. The day someone needs to drive a RT9387A this driver can probably easily be augmented to handle that chip too. Sakari Ailus, Pavel Machek and Andy Shevchenko helped significantly in getting this driver right. Cc: Sakari Ailus <[email protected]> Cc: [email protected] Cc: Stephan Gerhold <[email protected]> Cc: [email protected] Cc: [email protected] Reviewed-by: Sakari Ailus <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Pavel Machek <[email protected]>
2021-01-31dt-bindings: leds: Add DT binding for Richtek RT8515Linus Walleij1-0/+111
Add a YAML devicetree binding for the Richtek RT8515 dual channel flash/torch LED driver. Cc: Sakari Ailus <[email protected]> Cc: [email protected] Cc: Stephan Gerhold <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Sakari Ailus <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Pavel Machek <[email protected]>
2021-01-31leds: trigger: fix potential deadlock with libataAndrea Righi1-4/+6
We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ #25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e918188611f0 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <[email protected]> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb9956cc ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <[email protected]> Signed-off-by: Pavel Machek <[email protected]>
2021-01-31leds: leds-ariel: convert comma to semicolonZheng Yongjun1-3/+3
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <[email protected]> Reviewed-by: Alexander Dahl <[email protected]> Signed-off-by: Pavel Machek <[email protected]>
2021-01-31leds: leds-lm3533: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <[email protected]> Signed-off-by: Pavel Machek <[email protected]>
2021-01-30Merge tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds6-20/+81
Pull cifs fixes from Steve French: "Four cifs patches found in additional testing of the conversion to the new mount API: three small option processing ones, and one fixing domain based DFS referrals" * tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix dfs domain referrals cifs: returning mount parm processing errors correctly cifs: fix mounts to subdirectories of target cifs: ignore auto and noauto options if given
2021-01-30Merge tag 'scsi-fixes' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes in drivers. Both changing strings (one in a comment, one in a module help text) with no code impact" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit scsi: target: iscsi: Fix typo in comment
2021-01-30Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-0/+1
Pull OpenRISC fix from Stafford Horne: "Fix config dependencies for Litex SOC driver causing issues on um" * tag 'for-linus' of git://github.com/openrisc/linux: soc: litex: Properly depend on HAS_IOMEM
2021-01-30Merge tag 'devicetree-fixes-for-5.11-2' of ↵Linus Torvalds34-67/+49
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Cleanups on properties with standard unit suffixes - Fix overwriting dma_range_map if there's no 'dma-ranges' property - Fix a bug when creating a /chosen node from ARM ATAGs - Add missing properties for TI j721e USB binding - Several doc reference updates due to DT schema conversions * tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Cleanup standard unit properties of/device: Update dma_range_map only when dev has valid dma-ranges ARM: zImage: atags_to_fdt: Fix node names on added root nodes dt-bindings: usb: j721e: add ranges and dma-coherent props dt-bindings:iio:adc: update adc.yaml reference dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references dt-bindings: display: mediatek: update mediatek,dpi.yaml reference ASoC: audio-graph-card: update audio-graph-card.yaml reference
2021-01-30Merge tag 's390-5.11-4' of ↵Linus Torvalds6-74/+101
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix max number of VCPUs reported via ultravisor information sysfs interface. - Fix memory leaks during vfio-ap resources clean up on KVM pointer invalidation notification. - Fix potential specification exception by avoiding unnecessary interrupts disable after queue reset in vfio-ap. * tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: uv: Fix sysfs max number of VCPUs reporting s390/vfio-ap: No need to disable IRQ after queue reset s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated
2021-01-30Merge tag 'riscv-for-linus-5.11-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt: "A fix to avoid initializing max_mapnr to be too large, which may manifest on NUMA systems" * tag 'riscv-for-linus-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup pfn_valid error with wrong max_mapnr
2021-01-30neighbour: Prevent a dead entry from updating gc_listChinmay Agarwal1-3/+4
Following race condition was detected: <CPU A, t0> - neigh_flush_dev() is under execution and calls neigh_mark_dead(n) marking the neighbour entry 'n' as dead. <CPU B, t1> - Executing: __netif_receive_skb() -> __netif_receive_skb_core() -> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which takes a reference on neighbour entry 'n'. <CPU A, t2> - Moves further along neigh_flush_dev() and calls neigh_cleanup_and_release(n), but since reference count increased in t2, 'n' couldn't be destroyed. <CPU B, t3> - Moves further along, arp_process() and calls neigh_update()-> __neigh_update() -> neigh_update_gc_list(), which adds the neighbour entry back in gc_list(neigh_mark_dead(), removed it earlier in t0 from gc_list) <CPU B, t4> - arp_process() finally calls neigh_release(n), destroying the neighbour entry. This leads to 'n' still being part of gc_list, but the actual neighbour structure has been freed. The situation can be prevented from happening if we disallow a dead entry to have any possibility of updating gc_list. This is what the patch intends to achieve. Fixes: 9c29a2f55ec0 ("neighbor: Fix locking order for gc_list changes") Signed-off-by: Chinmay Agarwal <[email protected]> Reviewed-by: Cong Wang <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-30arm64: dts: ls1046a: fix dcfg address rangeZyta Szpak1-1/+1
Dcfg was overlapping with clockgen address space which resulted in failure in memory allocation for dcfg. According regs description dcfg size should not be bigger than 4KB. Signed-off-by: Zyta Szpak <[email protected]> Fixes: 8126d88162a5 ("arm64: dts: add QorIQ LS1046A SoC support") Signed-off-by: Shawn Guo <[email protected]>
2021-01-30Merge tag 'usb-serial-5.11-rc6' of ↵Greg Kroah-Hartman2-0/+8
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.11-rc6 Here are some new device-ids for 5.11-rc6. All but the option one have been in linux-next, and with no reported issues. * tag 'usb-serial-5.11-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: Adding support for Cinterion MV31 USB: serial: cp210x: add pid/vid for WSDA-200-USB USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000
2021-01-30powerpc/vdso64: remove meaningless vgettimeofday.o build ruleMasahiro Yamada1-2/+0
VDSO64 is only built for the 64-bit kernel, hence vgettimeofday.o is built by the generic rule in scripts/Makefile.build. This line does not provide anything useful. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-30powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.oMasahiro Yamada5-11/+4
vgettimeofday.o is unnecessarily rebuilt. Adding it to 'targets' is not enough to fix the issue. Kbuild is correctly rebuilding it because the command line is changed. PowerPC builds each vdso directory twice; first in vdso_prepare to generate vdso{32,64}-offsets.h, second as part of the ordinary build process to embed vdso{32,64}.so.dbg into the kernel. The problem shows up when CONFIG_PPC_WERROR=y due to the following line in arch/powerpc/Kbuild: subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror In the preparation stage, Kbuild directly visits the vdso directories, hence it does not inherit subdir-ccflags-y. In the second descend, Kbuild adds -Werror, which results in the command line flipping with/without -Werror. It implies a potential danger; if a more critical flag that would impact the resulted vdso, the offsets recorded in the headers might be different from real offsets in the embedded vdso images. Removing the unneeded second descend solves the problem. Reported-by: Michael Ellerman <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/linuxppc-dev/[email protected]/ Link: https://lore.kernel.org/r/[email protected]
2021-01-30powerpc/sstep: Fix array out of bound warningRavi Bangoria1-6/+8
Compiling kernel with -Warray-bounds throws below warning: In function 'emulate_vsx_store': warning: array subscript is above array bounds [-Warray-bounds] buf.d[2] = byterev_8(reg->d[1]); ~~~~~^~~ buf.d[3] = byterev_8(reg->d[0]); ~~~~~^~~ Fix it by using temporary array variable 'union vsx_reg buf32[]' in that code block. Also, with element_size = 32, 'union vsx_reg *reg' is an array of size 2. So, use 'reg' as an array instead of pointer in the same code block. Fixes: af99da74333b ("powerpc/sstep: Support VSX vector paired storage access instructions") Suggested-by: Naveen N. Rao <[email protected]> Signed-off-by: Ravi Bangoria <[email protected]> Tested-by: Naveen N. Rao <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-29rxrpc: Fix deadlock around release of dst cached on udp tunnelDavid Howells2-6/+6
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst from an incoming packet to get stolen and attached to the UDP socket from whence it is leaked when that socket is closed. When a network namespace is removed, the wait for dst records to be cleaned up happens before the cleanup of the rxrpc and UDP socket, meaning that the wait never finishes. Fix this by moving the rxrpc (and, by dependence, the afs) private per-network namespace registrations to the device group rather than subsys group. This allows cached rxrpc local endpoints to be cleared and their UDP sockets closed before we try waiting for the dst records. The symptom is that lines looking like the following: unregister_netdevice: waiting for lo to become free get emitted at regular intervals after running something like the referenced syzbot test. Thanks to Vadim for tracking this down and work out the fix. Reported-by: [email protected] Reported-by: Vadim Fedorenko <[email protected]> Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells <[email protected]> Acked-by: Vadim Fedorenko <[email protected]> Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-29r8169: work around RTL8125 UDP hw bugHeiner Kallweit1-6/+65
It was reported that on RTL8125 network breaks under heavy UDP load, e.g. torrent traffic ([0], from comment 27). Realtek confirmed a hw bug and provided me with a test version of the r8125 driver including a workaround. Tests confirmed that the workaround fixes the issue. I modified the original version of the workaround to meet mainline code style. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 v2: - rebased to net v3: - make rtl_skb_is_udp() more robust and use skb_header_pointer() to access the ip(v6) header v4: - remove dependency on ptp_classify.h - replace magic number with offsetof(struct udphdr, len) Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Tested-by: xplo <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-29net: arcnet: Fix RESET flag handlingAhmed S. Darwish8-14/+78
The main arcnet interrupt handler calls arcnet_close() then arcnet_open(), if the RESET status flag is encountered. This is invalid: 1) In general, interrupt handlers should never call ->ndo_stop() and ->ndo_open() functions. They are usually full of blocking calls and other methods that are expected to be called only from drivers init and exit code paths. 2) arcnet_close() contains a del_timer_sync(). If the irq handler interrupts the to-be-deleted timer, del_timer_sync() will just loop forever. 3) arcnet_close() also calls tasklet_kill(), which has a warning if called from irq context. 4) For device reset, the sequence "arcnet_close(); arcnet_open();" is not complete. Some children arcnet drivers have special init/exit code sequences, which then embed a call to arcnet_open() and arcnet_close() accordingly. Check drivers/net/arcnet/com20020.c. Run the device RESET sequence from a scheduled workqueue instead. Signed-off-by: Ahmed S. Darwish <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-29dt-bindings: Cleanup standard unit propertiesRob Herring25-56/+29
Properties with standard unit suffixes already have a type and don't need type definitions. They also default to a single entry, so 'maxItems: 1' can be dropped. adi,ad5758 is an oddball which defined an enum of arrays. While a valid schema, it is simpler as a whole to only define scalar constraints. Cc: Jean Delvare <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Ulf Hansson <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Serge Semin <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Rob Herring <[email protected]> Acked-by: Guenter Roeck <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Wolfram Sang <[email protected]> # for I2C Acked-by: Alexandre Belloni <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Sebastian Reichel <[email protected]> # for power-supply Acked-by: Jonathan Cameron <[email protected]> #for-iio Acked-by: Alexandre TORGUE <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-29kretprobe: Avoid re-registration of the same kretprobe earlierWang ShaoBo1-0/+4
Our system encountered a re-init error when re-registering same kretprobe, where the kretprobe_instance in rp->free_instances is illegally accessed after re-init. Implementation to avoid re-registration has been introduced for kprobe before, but lags for register_kretprobe(). We must check if kprobe has been re-registered before re-initializing kretprobe, otherwise it will destroy the data struct of kretprobe registered, which can lead to memory leak, system crash, also some unexpected behaviors. We use check_kprobe_rereg() to check if kprobe has been re-registered before running register_kretprobe()'s body, for giving a warning message and terminate registration process. Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: 1f0ab40976460 ("kprobes: Prevent re-registration of the same kprobe") [ The above commit should have been done for kretprobes too ] Acked-by: Naveen N. Rao <[email protected]> Acked-by: Ananth N Mavinakayanahalli <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Wang ShaoBo <[email protected]> Signed-off-by: Cheng Jian <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-01-29Merge tag 'arm64-fixes' of ↵Linus Torvalds2-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses. - Do not blindly trust the DMA masks from ACPI/IORT. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ACPI/IORT: Do not blindly trust DMA masks from firmware arm64: Fix kernel address detection of __is_lm_address()
2021-01-29Merge tag 'for-5.11-rc5-tag' of ↵Linus Torvalds6-51/+46
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes for a late rc: - fix lockdep complaint on 32bit arches and also remove an unsafe memory use due to device vs filesystem lifetime - two fixes for free space tree: * race during log replay and cache rebuild, now more likely to happen due to changes in this dev cycle * possible free space tree corruption with online conversion during initial tree population" * tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix log replay failure due to race with space cache rebuild btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch btrfs: fix possible free space tree corruption with online conversion
2021-01-29Merge tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-blockLinus Torvalds14-29/+75
Pull block fixes from Jens Axboe: "All over the place fixes for this release: - blk-cgroup iteration teardown resched fix (Baolin) - NVMe pull request from Christoph: - add another Write Zeroes quirk (Chaitanya Kulkarni) - handle a no path available corner case (Daniel Wagner) - use the proper RCU aware list_add helper (Chao Leng) - bcache regression fix (Coly) - bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12, but for now, we'll make it IRQ safe (Damien) - null_blk zoned init fix (Damien) - add_partition() error handling fix (Dinghao) - s390 dasd kobject fix (Jan) - nbd fix for freezing queue while adding connections (Josef) - tag queueing regression fix (Ming) - revert of a patch that inadvertently meant that we regressed write performance on raid (Maxim)" * tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block: null_blk: cleanup zoned mode initialization nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head nvme-multipath: Early exit if no path is available nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES block: fix bd_size_lock use blk-cgroup: Use cond_resched() when destroy blkgs Revert "block: simplify set_init_blocksize" to regain lost performance nbd: freeze the queue while we're adding connections s390/dasd: Fix inconsistent kobject removal block: Fix an error handling in add_partition blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
2021-01-29Merge tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-42/+53
Pull io_uring fixes from Jens Axboe: "We got the cancelation story sorted now, so for all intents and purposes, this should be it for 5.11 outside of any potential little fixes that may come in. This contains: - task_work task state fixes (Hao, Pavel) - Cancelation fixes (me, Pavel) - Fix for an inflight req patch in this release (Pavel) - Fix for a lock deadlock issue (Pavel)" * tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block: io_uring: reinforce cancel on flush during exit io_uring: fix sqo ownership false positive warning io_uring: fix list corruption for splice file_get io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE io_uring: fix wqe->lock/completion_lock deadlock io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE io_uring: only call io_cqring_ev_posted() if events were posted io_uring: if we see flush on exit, cancel related tasks
2021-01-30soc: litex: Properly depend on HAS_IOMEMDavid Gow1-0/+1
The LiteX SOC controller driver makes use of IOMEM functions like devm_platform_ioremap_resource(), which are only available if CONFIG_HAS_IOMEM is defined. This causes the driver to be enable under make ARCH=um allyesconfig, even though it won't build. By adding a dependency on HAS_IOMEM, the driver will not be enabled on architectures which don't support it. Fixes: 22447a99c97e ("drivers/soc/litex: add LiteX SoC Controller driver") Signed-off-by: David Gow <[email protected]> [[email protected]: Fix typo in commit message pointed out in review] Signed-off-by: Stafford Horne <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.