aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-08-31ibmvnic: Include missing return code checks in reset functionThomas Falcon1-3/+9
Check the return codes of these functions and halt reset in case of failure. The driver will remain in a dormant state until the next reset event, when device initialization will be re-attempted. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31selftests: pmtu: detect correct binary to ping ipv6 addressesSabrina Dubroca1-1/+4
Some systems don't have the ping6 binary anymore, and use ping for everything. Detect the absence of ping6 and try to use ping instead. Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Sabrina Dubroca <[email protected]> Acked-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31selftests: pmtu: maximum MTU for vti4 is 2^16-1-20Sabrina Dubroca1-1/+1
Since commit 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu"), the maximum MTU for vti4 is based on IP_MAX_MTU instead of the mysterious constant 0xFFF8. This makes this selftest fail. Fixes: 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu") Signed-off-by: Sabrina Dubroca <[email protected]> Acked-by: Stefano Brivio <[email protected]> Acked-by: Nicolas Dichtel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31tcp: do not restart timewait timer on rst receptionFlorian Westphal1-1/+2
RFC 1337 says: ''Ignore RST segments in TIME-WAIT state. If the 2 minute MSL is enforced, this fix avoids all three hazards.'' So with net.ipv4.tcp_rfc1337=1, expected behaviour is to have TIME-WAIT sk expire rather than removing it instantly when a reset is received. However, Linux will also re-start the TIME-WAIT timer. This causes connect to fail when tying to re-use ports or very long delays (until syn retry interval exceeds MSL). packetdrill test case: // Demonstrate bogus rearming of TIME-WAIT timer in rfc1337 mode. `sysctl net.ipv4.tcp_rfc1337=1` 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < S 0:0(0) win 29200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 // Receive first segment 0.310 < P. 1:1001(1000) ack 1 win 46 // Send one ACK 0.310 > . 1:1(0) ack 1001 // read 1000 byte 0.310 read(4, ..., 1000) = 1000 // Application writes 100 bytes 0.350 write(4, ..., 100) = 100 0.350 > P. 1:101(100) ack 1001 // ACK 0.500 < . 1001:1001(0) ack 101 win 257 // close the connection 0.600 close(4) = 0 0.600 > F. 101:101(0) ack 1001 win 244 // Our side is in FIN_WAIT_1 & waits for ack to fin 0.7 < . 1001:1001(0) ack 102 win 244 // Our side is in FIN_WAIT_2 with no outstanding data. 0.8 < F. 1001:1001(0) ack 102 win 244 0.8 > . 102:102(0) ack 1002 win 244 // Our side is now in TIME_WAIT state, send ack for fin. 0.9 < F. 1002:1002(0) ack 102 win 244 0.9 > . 102:102(0) ack 1002 win 244 // Peer reopens with in-window SYN: 1.000 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // Therefore, reply with ACK. 1.000 > . 102:102(0) ack 1002 win 244 // Peer sends RST for this ACK. Normally this RST results // in tw socket removal, but rfc1337=1 setting prevents this. 1.100 < R 1002:1002(0) win 244 // second syn. Due to rfc1337=1 expect another pure ACK. 31.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 31.0 > . 102:102(0) ack 1002 win 244 // .. and another RST from peer. 31.1 < R 1002:1002(0) win 244 31.2 `echo no timer restart;ss -m -e -a -i -n -t -o state TIME-WAIT` // third syn after one minute. Time-Wait socket should have expired by now. 63.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // so we expect a syn-ack & 3whs to proceed from here on. 63.0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> Without this patch, 'ss' shows restarts of tw timer and last packet is thus just another pure ack, more than one minute later. This restores the original code from commit 283fd6cf0be690a83 ("Merge in ANK networking jumbo patch") in netdev-vger-cvs.git . For some reason the else branch was removed/lost in 1f28b683339f7 ("Merge in TCP/UDP optimizations and [..]") and timer restart became unconditional. Reported-by: Michal Tesar <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31net/rds: RDS is not Radio Data SystemPavel Machek1-1/+1
Getting prompt "The RDS Protocol" (RDS) is not too helpful, and it is easily confused with Radio Data System (which we may want to support in kernel, too). Signed-off-by: Pavel Machek <[email protected]> Acked-by: Sowmini Varadhan <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Acked-by: Sowmini Varadhan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()Dexuan Cui1-1/+10
This patch fixes the race between netvsc_probe() and rndis_set_subchannel(), which can cause a deadlock. These are the related 3 paths which show the deadlock: path #1: Workqueue: hv_vmbus_con vmbus_onmessage_work [hv_vmbus] Call Trace: schedule schedule_preempt_disabled __mutex_lock __device_attach bus_probe_device device_add vmbus_device_register vmbus_onoffer vmbus_onmessage_work process_one_work worker_thread kthread ret_from_fork path #2: schedule schedule_preempt_disabled __mutex_lock netvsc_probe vmbus_probe really_probe __driver_attach bus_for_each_dev driver_attach_async async_run_entry_fn process_one_work worker_thread kthread ret_from_fork path #3: Workqueue: events netvsc_subchan_work [hv_netvsc] Call Trace: schedule rndis_set_subchannel netvsc_subchan_work process_one_work worker_thread kthread ret_from_fork Before path #1 finishes, path #2 can start to run, because just before the "bus_probe_device(dev);" in device_add() in path #1, there is a line "object_uevent(&dev->kobj, KOBJ_ADD);", so systemd-udevd can immediately try to load hv_netvsc and hence path #2 can start to run. Next, path #2 offloads the subchannal's initialization to a workqueue, i.e. path #3, so we can end up in a deadlock situation like this: Path #2 gets the device lock, and is trying to get the rtnl lock; Path #3 gets the rtnl lock and is waiting for all the subchannel messages to be processed; Path #1 is trying to get the device lock, but since #2 is not releasing the device lock, path #1 has to sleep; since the VMBus messages are processed one by one, this means the sub-channel messages can't be procedded, so #3 has to sleep with the rtnl lock held, and finally #2 has to sleep... Now all the 3 paths are sleeping and we hit the deadlock. With the patch, we can make sure #2 gets both the device lock and the rtnl lock together, gets its job done, and releases the locks, so #1 and #3 will not be blocked for ever. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Dexuan Cui <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: K. Y. Srinivasan <[email protected]> Cc: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31nfp: wait for posted reconfigs when disabling the deviceJakub Kicinski1-15/+33
To avoid leaking a running timer we need to wait for the posted reconfigs after netdev is unregistered. In common case the process of deinitializing the device will perform synchronous reconfigs which wait for posted requests, but especially with VXLAN ports being actively added and removed there can be a race condition leaving a timer running after adapter structure is freed leading to a crash. Add an explicit flush after deregistering and for a good measure a warning to check if timer is running just before structures are freed. Fixes: 3d780b926a12 ("nfp: add async reconfiguration mechanism") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31Revert "packet: switch kvzalloc to allocate memory"Eric Dumazet2-13/+32
This reverts commit 71e41286203c017d24f041a7cd71abea7ca7b1e0. mmap()/munmap() can not be backed by kmalloced pages : We fault in : VM_BUG_ON_PAGE(PageSlab(page), page); unmap_single_vma+0x8a/0x110 unmap_vmas+0x4b/0x90 unmap_region+0xc9/0x140 do_munmap+0x274/0x360 vm_munmap+0x81/0xc0 SyS_munmap+0x2b/0x40 do_syscall_64+0x13e/0x1c0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 71e41286203c ("packet: switch kvzalloc to allocate memory") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: John Sperbeck <[email protected]> Bisected-by: John Sperbeck <[email protected]> Cc: Zhang Yu <[email protected]> Cc: Li RongQing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31netfilter: nf_tables: release chain in flushing setTaehee Yoo1-0/+1
When element of verdict map is deleted, the delete routine should release chain. however, flush element of verdict map routine doesn't release chain. test commands: %nft add table ip filter %nft add chain ip filter c1 %nft add map ip filter map1 { type ipv4_addr : verdict \; } %nft add element ip filter map1 { 1 : jump c1 } %nft flush map ip filter map1 %nft flush ruleset splat looks like: [ 4895.170899] kernel BUG at net/netfilter/nf_tables_api.c:1415! [ 4895.178114] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 4895.178880] CPU: 0 PID: 1670 Comm: nft Not tainted 4.18.0+ #55 [ 4895.178880] RIP: 0010:nf_tables_chain_destroy.isra.28+0x39/0x220 [nf_tables] [ 4895.178880] Code: fc ff df 53 48 89 fb 48 83 c7 50 48 89 fa 48 c1 ea 03 0f b6 04 02 84 c0 74 09 3c 03 7f 05 e8 3e 4c 25 e1 8b 43 50 85 c0 74 02 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 [ 4895.228342] RSP: 0018:ffff88010b98f4c0 EFLAGS: 00010202 [ 4895.234841] RAX: 0000000000000001 RBX: ffff8801131c6968 RCX: ffff8801146585b0 [ 4895.234841] RDX: 1ffff10022638d37 RSI: ffff8801191a9348 RDI: ffff8801131c69b8 [ 4895.234841] RBP: ffff8801146585a8 R08: 1ffff1002323526a R09: 0000000000000000 [ 4895.234841] R10: 0000000000000000 R11: 0000000000000000 R12: dead000000000200 [ 4895.234841] R13: dead000000000100 R14: ffffffffa3638af8 R15: dffffc0000000000 [ 4895.234841] FS: 00007f6d188e6700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000 [ 4895.234841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4895.234841] CR2: 00007ffe72b8df88 CR3: 000000010e2d4000 CR4: 00000000001006f0 [ 4895.234841] Call Trace: [ 4895.234841] nf_tables_commit+0x2704/0x2c70 [nf_tables] [ 4895.234841] ? nfnetlink_rcv_batch+0xa4f/0x11b0 [nfnetlink] [ 4895.234841] ? nf_tables_setelem_notify.constprop.48+0x1a0/0x1a0 [nf_tables] [ 4895.323824] ? __lock_is_held+0x9d/0x130 [ 4895.323824] ? kasan_unpoison_shadow+0x30/0x40 [ 4895.333299] ? kasan_kmalloc+0xa9/0xc0 [ 4895.333299] ? kmem_cache_alloc_trace+0x2c0/0x310 [ 4895.333299] ? nfnetlink_rcv_batch+0xa4f/0x11b0 [nfnetlink] [ 4895.333299] nfnetlink_rcv_batch+0xdb9/0x11b0 [nfnetlink] [ 4895.333299] ? debug_show_all_locks+0x290/0x290 [ 4895.333299] ? nfnetlink_net_init+0x150/0x150 [nfnetlink] [ 4895.333299] ? sched_clock_cpu+0xe5/0x170 [ 4895.333299] ? sched_clock_local+0xff/0x130 [ 4895.333299] ? sched_clock_cpu+0xe5/0x170 [ 4895.333299] ? find_held_lock+0x39/0x1b0 [ 4895.333299] ? sched_clock_local+0xff/0x130 [ 4895.333299] ? memset+0x1f/0x40 [ 4895.333299] ? nla_parse+0x33/0x260 [ 4895.333299] ? ns_capable_common+0x6e/0x110 [ 4895.333299] nfnetlink_rcv+0x2c0/0x310 [nfnetlink] [ ... ] Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-08-31netfilter: kconfig: nat related expression depend on nftables coreFlorian Westphal1-3/+5
NF_TABLES_IPV4 is now boolean so it is possible to set NF_TABLES=m NF_TABLES_IPV4=y NFT_CHAIN_NAT_IPV4=y which causes: nft_chain_nat_ipv4.c:(.text+0x6d): undefined reference to `nft_do_chain' Wrap NFT_CHAIN_NAT_IPV4 and related nat expressions with NF_TABLES to restore the dependency. Reported-by: Randy Dunlap <[email protected]> Fixes: 02c7b25e5f54 ("netfilter: nf_tables: build-in filter chain type") Signed-off-by: Florian Westphal <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-08-31Merge tag 'arm64-fixes' of ↵Linus Torvalds3-17/+26
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A few arm64 fixes came in this week, specifically fixing some nasty truncation of return values from firmware calls and resolving a VM_BUG_ON due to accessing uninitialised struct pages corresponding to NOMAP pages. Summary: - Fix typos in SVE documentation - Fix type-checking and implicit truncation for SMCCC calls - Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP regions" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: always enable CONFIG_HOLES_IN_ZONE arm/arm64: smccc-1.1: Handle function result as parameters arm/arm64: smccc-1.1: Make return values unsigned long Documentation/arm64/sve: Couple of improvements and typos
2018-08-31x86/efi: Load fixmap GDT in efi_call_phys_epilog()Joerg Roedel1-6/+2
When PTI is enabled on x86-32 the kernel uses the GDT mapped in the fixmap for the simple reason that this address is also mapped for user-space. The efi_call_phys_prolog()/efi_call_phys_epilog() wrappers change the GDT to call EFI runtime services and switch back to the kernel GDT when they return. But the switch-back uses the writable GDT, not the fixmap GDT. When that happened and and the CPU returns to user-space it switches to the user %cr3 and tries to restore user segment registers. This fails because the writable GDT is not mapped in the user page-table, and without a GDT the fault handlers also can't be launched. The result is a triple fault and reboot of the machine. Fix that by restoring the GDT back to the fixmap GDT which is also mapped in the user page-table. Fixes: 7757d607c6b3 x86/pti: ('Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32') Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Guenter Roeck <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Pavel Machek <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-31Merge tag 'for-linus-4.19b-rc2-tag' of ↵Linus Torvalds4-10/+24
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - minor cleanup avoiding a warning when building with new gcc - a patch to add a new sysfs node for Xen frontend/backend drivers to make it easier to obtain the state of a pv device - two fixes for 32-bit pv-guests to avoid intermediate L1TF vulnerable PTEs * tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: remove redundant variable save_pud xen: export device state to sysfs x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear x86/xen: don't write ptes directly in 32-bit PV guests
2018-08-31Merge tag 'm68k-for-v4.19-tag2' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "Just a single fix for a bug introduced during the merge window: fix wrong date and time on PMU-based Macs" * tag 'm68k-for-v4.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Use correct PMU response format
2018-08-31Merge branch 'i2c/for-current' of ↵Linus Torvalds8-44/+66
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - regression fixes for i801 and designware - better API and leak fix for releasing DMA safe buffers - better greppable strings for the bitbang algorithm * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sh_mobile: fix leak when using DMA bounce buffer i2c: sh_mobile: define start_ch() void as it only returns 0 anyhow i2c: refactor function to release a DMA safe buffer i2c: algos: bit: make the error messages grepable i2c: designware: Re-init controllers with pm_disabled set on resume i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus
2018-08-31x86/nmi: Fix NMI uaccess race against CR3 switchingAndy Lutomirski4-1/+53
A NMI can hit in the middle of context switching or in the middle of switch_mm_irqs_off(). In either case, CR3 might not match current->mm, which could cause copy_from_user_nmi() and friends to read the wrong memory. Fix it by adding a new nmi_uaccess_okay() helper and checking it in copy_from_user_nmi() and in __copy_from_user_nmi()'s callers. Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Cc: Nadav Amit <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Jann Horn <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/dd956eba16646fd0b15c3c0741269dfd84452dac.1535557289.git.luto@kernel.org
2018-08-31x86: Allow generating user-space headers without a compilerBen Hutchings1-4/+7
When bootstrapping an architecture, it's usual to generate the kernel's user-space headers (make headers_install) before building a compiler. Move the compiler check (for asm goto support) to the archprepare target so that it is only done when building code for the target. Fixes: e501ce957a78 ("x86: Force asm-goto") Reported-by: Helmut Grohne <[email protected]> Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-31x86/dumpstack: Don't dump kernel memory based on usermode RIPJann Horn3-5/+15
show_opcodes() is used both for dumping kernel instructions and for dumping user instructions. If userspace causes #PF by jumping to a kernel address, show_opcodes() can be reached with regs->ip controlled by the user, pointing to kernel code. Make sure that userspace can't trick us into dumping kernel memory into dmesg. Fixes: 7cccf0725cf7 ("x86/dumpstack: Add a show_ip() function") Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-31of: Add device_type access helper functionsRob Herring1-0/+12
In preparation to remove direct access to device_node.type, add of_node_is_type() and of_node_get_device_type() helpers to check and retrieve the device type. Cc: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-08-31cpu/hotplug: Remove skip_onerr field from cpuhp_step structureMukesh Ojha1-22/+4
When notifiers were there, `skip_onerr` was used to avoid calling particular step startup/teardown callbacks in the CPU up/down rollback path, which made the hotplug asymmetric. As notifiers are gone now after the full state machine conversion, the `skip_onerr` field is no longer required. Remove it from the structure and its usage. Signed-off-by: Mukesh Ojha <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-08-31arm64: mm: always enable CONFIG_HOLES_IN_ZONEJames Morse1-1/+0
Commit 6d526ee26ccd ("arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA") only enabled HOLES_IN_ZONE for NUMA systems because the NUMA code was choking on the missing zone for nomap pages. This problem doesn't just apply to NUMA systems. If the architecture doesn't set HAVE_ARCH_PFN_VALID, pfn_valid() will return true if the pfn is part of a valid sparsemem section. When working with multiple pages, the mm code uses pfn_valid_within() to test each page it uses within the sparsemem section is valid. On most systems memory comes in MAX_ORDER_NR_PAGES chunks which all have valid/initialised struct pages. In this case pfn_valid_within() is optimised out. Systems where this isn't true (e.g. due to nomap) should set HOLES_IN_ZONE and provide HAVE_ARCH_PFN_VALID so that mm tests each page as it works with it. Currently non-NUMA arm64 systems can't enable HOLES_IN_ZONE, leading to a VM_BUG_ON(): | page:fffffdff802e1780 is uninitialized and poisoned | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) | ------------[ cut here ]------------ | kernel BUG at include/linux/mm.h:978! | Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] | CPU: 1 PID: 25236 Comm: dd Not tainted 4.18.0 #7 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 40000085 (nZcv daIf -PAN -UAO) | pc : move_freepages_block+0x144/0x248 | lr : move_freepages_block+0x144/0x248 | sp : fffffe0071177680 [...] | Process dd (pid: 25236, stack limit = 0x0000000094cc07fb) | Call trace: | move_freepages_block+0x144/0x248 | steal_suitable_fallback+0x100/0x16c | get_page_from_freelist+0x440/0xb20 | __alloc_pages_nodemask+0xe8/0x838 | new_slab+0xd4/0x418 | ___slab_alloc.constprop.27+0x380/0x4a8 | __slab_alloc.isra.21.constprop.26+0x24/0x34 | kmem_cache_alloc+0xa8/0x180 | alloc_buffer_head+0x1c/0x90 | alloc_page_buffers+0x68/0xb0 | create_empty_buffers+0x20/0x1ec | create_page_buffers+0xb0/0xf0 | __block_write_begin_int+0xc4/0x564 | __block_write_begin+0x10/0x18 | block_write_begin+0x48/0xd0 | blkdev_write_begin+0x28/0x30 | generic_perform_write+0x98/0x16c | __generic_file_write_iter+0x138/0x168 | blkdev_write_iter+0x80/0xf0 | __vfs_write+0xe4/0x10c | vfs_write+0xb4/0x168 | ksys_write+0x44/0x88 | sys_write+0xc/0x14 | el0_svc_naked+0x30/0x34 | Code: aa1303e0 90001a01 91296421 94008902 (d4210000) | ---[ end trace 1601ba47f6e883fe ]--- Remove the NUMA dependency. Link: https://www.spinics.net/lists/arm-kernel/msg671851.html Cc: <[email protected]> Cc: Ard Biesheuvel <[email protected]> Reported-by: Mikulas Patocka <[email protected]> Reviewed-by: Pavel Tatashin <[email protected]> Tested-by: Mikulas Patocka <[email protected]> Signed-off-by: James Morse <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-08-31m68k/mac: Use correct PMU response formatFinn Thain1-6/+4
Now that the 68k Mac port has adopted the via-pmu driver, it must decode the PMU response accordingly otherwise the date and time will be wrong. Fixes: ebd722275f9cfc67 ("macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver") Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2018-08-30Merge tag 'drm-fixes-2018-08-31' of git://anongit.freedesktop.org/drm/drmLinus Torvalds26-161/+303
Pull drm fixes from Dave Airlie: "Regular fixes pull: - Mediatek has a bunch of fixes to their RDMA and Overlay engines. - i915 has some Cannonlake/Geminilake watermark workarounds, LSPCON fix, HDCP free fix, audio fix and a ppgtt reference counting fix. - amdgpu has some SRIOV, Kasan, memory leaks and other misc fixes" * tag 'drm-fixes-2018-08-31' of git://anongit.freedesktop.org/drm/drm: (35 commits) drm/i915/audio: Hook up component bindings even if displays are disabled drm/i915: Increase LSPCON timeout drm/i915: Stop holding a ref to the ppgtt from each vma drm/i915: Free write_buf that we allocated with kzalloc. drm/i915: Fix glk/cnl display w/a #1175 drm/amdgpu: Need to set moved to true when evict bo drm/amdgpu: Remove duplicated power source update drm/amd/display: Fix memory leak caused by missed dc_sink_release drm/amdgpu: fix holding mn_lock while allocating memory drm/amdgpu: Power on uvd block when hw_fini drm/amdgpu: Update power state at the end of smu hw_init. drm/amdgpu: Fix vce initialize failed on Kaveri/Mullins drm/amdgpu: Enable/disable gfx PG feature in rlc safe mode drm/amdgpu: Adjust the VM size based on system memory size v2 drm/mediatek: fix connection from RDMA2 to DSI1 drm/mediatek: update some variable name from ovl to comp drm/mediatek: use layer_nr function to get layer number to init plane drm/mediatek: add function to return RDMA layer number drm/mediatek: add function to return OVL layer number drm/mediatek: add function to get layer number for component ...
2018-08-30disable stringop truncation warnings for nowStephen Rothwell1-0/+3
They are too noisy Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-08-30Merge tag 'pm-4.19-rc2' of ↵Linus Torvalds2-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These address a corner case in the menu cpuidle governor and fix error handling in the PM core's generic clock management code. Specifics: - Make the menu cpuidle governor avoid stopping the scheduler tick if the predicted idle duration exceeds the tick period length, but the selected idle state is shallow and deeper idle states with high target residencies are available (Rafael Wysocki). - Make the PM core's generic clock management code use a proper data type for one variable to make error handling work (Dan Carpenter)" * tag 'pm-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: menu: Retain tick when shallow state is selected PM / clk: signedness bug in of_pm_clk_add_clks()
2018-08-31Merge branch 'pm-core'Rafael J. Wysocki1-1/+1
Merge a generic clock management fix for 4.19-rc2. * pm-core: PM / clk: signedness bug in of_pm_clk_add_clks()
2018-08-30clk: x86: Set default parent to 48MhzAkshu Agrawal1-1/+1
System clk provided in ST soc can be set to: 48Mhz, non-spread 25Mhz, spread To get accurate rate, we need it to set it at non-spread option which is 48Mhz. Signed-off-by: Akshu Agrawal <[email protected]> Reviewed-by: Daniel Kurtz <[email protected]> Fixes: 421bf6a1f061 ("clk: x86: Add ST oscout platform clock") Signed-off-by: Stephen Boyd <[email protected]>
2018-08-30i2c: sh_mobile: fix leak when using DMA bounce bufferWolfram Sang1-2/+4
We only freed the bounce buffer after successful DMA, missing the cases where DMA setup may have gone wrong. Use a better location which always gets called after each message and use 'stop_after_dma' as a flag for a successful transfer. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: sh_mobile: define start_ch() void as it only returns 0 anyhowWolfram Sang1-6/+3
After various refactoring over the years, start_ch() doesn't return errno anymore, so make the function return void. This saves the error handling when calling it which in turn eases cleanup of resources of a future patch. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: refactor function to release a DMA safe bufferWolfram Sang4-10/+15
a) rename to 'put' instead of 'release' to match 'get' when obtaining the buffer b) change the argument order to have the buffer as first argument c) add a new argument telling the function if the message was transferred. This allows the function to be used also in cases where setting up DMA failed, so the buffer needs to be freed without syncing to the message buffer. Also convert the only user. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: algos: bit: make the error messages grepableJan Kundrát1-24/+31
Yep, I went looking for one of these, and I wasn't able to find it easily. That's worse than a line which is 82-chars long, IMHO. Signed-off-by: Jan Kundrát <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: designware: Re-init controllers with pm_disabled set on resumeHans de Goede2-2/+6
On Bay Trail and Cherry Trail devices we set the pm_disabled flag for I2C busses which the OS shares with the PUNIT as these need special handling. Until now we called dev_pm_syscore_device(dev, true) for I2C controllers with this flag set to keep these I2C controllers always on. After commit 12864ff8545f ("ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation"), this no longer works. This commit modifies lpss_iosf_exit_d3_state() to only run if lpss_iosf_enter_d3_state() has ran before it, so that it does not run on a resume from hibernate (or from S3). On these systems the conditions for lpss_iosf_enter_d3_state() to run never become true, so lpss_iosf_exit_d3_state() never gets called and the 2 LPSS DMA controllers never get forced into D0 mode, instead they are left in their default automatic power-on when needed mode. The not forcing of D0 mode for the DMA controllers enables these systems to properly enter S0ix modes, which is a good thing. But after entering S0ix modes the I2C controller connected to the PMIC no longer works, leading to e.g. broken battery monitoring. The _PS3 method for this I2C controller looks like this: Method (_PS3, 0, NotSerialized) // _PS3: Power State 3 { If ((((PMID == 0x04) || (PMID == 0x05)) || (PMID == 0x06))) { Return (Zero) } PSAT |= 0x03 Local0 = PSAT /* \_SB_.I2C5.PSAT */ } Where PMID = 0x05, so we enter the Return (Zero) path on these systems. So even if we were to not call dev_pm_syscore_device(dev, true) the I2C controller will be left in D0 rather then be switched to D3. Yet on other Bay and Cherry Trail devices S0ix is not entered unless *all* I2C controllers are in D3 mode. This combined with the I2C controller no longer working now that we reach S0ix states on these systems leads to me believing that the PUNIT itself puts the I2C controller in D3 when all other conditions for entering S0ix states are true. Since now the I2C controller is put in D3 over a suspend/resume we must re-initialize it afterwards and that does indeed fix it no longer working. This commit implements this fix by: 1) Making the suspend_late callback a no-op if pm_disabled is set and making the resume_early callback skip the clock re-enable (since it now was not disabled) while still doing the necessary I2C controller re-init. 2) Removing the dev_pm_syscore_device(dev, true) call, so that the suspend and resume callbacks are actually called. Normally this would cause the ACPI pm code to call _PS3 putting the I2C controller in D3, wreaking havoc since it is shared with the PUNIT, but in this special case the _PS3 method is a no-op so we can safely allow a "fake" suspend / resume. Fixes: 12864ff8545f ("ACPI / LPSS: Avoid PM quirks on suspend and resume ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200861 Cc: 4.15+ <[email protected]> # 4.15+ Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Acked-by: Jarkko Nikula <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBusMika Westerberg1-1/+8
Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") made it possible for AML code to access SMBus I/O ports by installing custom SystemIO OpRegion handler and blocking i80i driver access upon first AML read/write to this OpRegion. However, while ThinkPad T560 does have SystemIO OpRegion declared under the SMBus device, it does not access any of the SMBus registers: Device (SMBU) { ... OperationRegion (SMBP, PCI_Config, 0x50, 0x04) Field (SMBP, DWordAcc, NoLock, Preserve) { , 5, TCOB, 11, Offset (0x04) } Name (TCBV, 0x00) Method (TCBS, 0, NotSerialized) { If ((TCBV == 0x00)) { TCBV = (\_SB.PCI0.SMBU.TCOB << 0x05) } Return (TCBV) /* \_SB_.PCI0.SMBU.TCBV */ } OperationRegion (TCBA, SystemIO, TCBS (), 0x10) Field (TCBA, ByteAcc, NoLock, Preserve) { Offset (0x04), , 9, CPSC, 1 } } Problem with the current approach is that it blocks all I/O port access and because this system has touchpad connected to the SMBus controller after first AML access (happens during suspend/resume cycle) the touchpad fails to work anymore. Fix this so that we allow ACPI AML I/O port access if it does not touch the region reserved for the SMBus. Fixes: 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200737 Reported-by: Yussuf Khalil <[email protected]> Signed-off-by: Mika Westerberg <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30Merge tag 'for-linus-20180830' of git://git.kernel.dk/linux-blockLinus Torvalds12-108/+269
Pull block fixes from Jens Axboe: "Small collection of fixes that should go into this series. This pull contains: - NVMe pull request with three small fixes (via Christoph) - Kill useless NULL check before kmem_cache_destroy (Chengguang Xu) - Xen block driver pull request with persistent grant flushing fixes (Juergen Gross) - Final wbt fixes, wrapping up the changes for this series. These have been heavily tested (me) - cdrom info leak fix (Scott Bauer) - ATA dma quirk for SQ201 (Linus Walleij) - Straight forward bsg refcount_t conversion (John Pittman)" * tag 'for-linus-20180830' of git://git.kernel.dk/linux-block: cdrom: Fix info leak/OOB read in cdrom_ioctl_drive_status nvmet: free workqueue object if module init fails nvme-fcloop: Fix dropped LS's to removed target port nvme-pci: add a memory barrier to nvme_dbbuf_update_and_check_event block: bsg: move atomic_t ref_count variable to refcount API block: remove unnecessary condition check ata: ftide010: Add a quirk for SQ201 blk-wbt: remove dead code blk-wbt: improve waking of tasks blk-wbt: abstract out end IO completion handler xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ring xen/blkback: move persistent grants flags to bool xen/blkfront: reorder tests in xlblk_init() xen/blkfront: cleanup stale persistent grants xen/blkback: don't keep persistent grants too long
2018-08-30of: add node name compare helper functionsRob Herring2-0/+35
In preparation to remove device_node.name pointer, add helper functions for node name comparisons which are a common pattern throughout the kernel. Cc: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-08-30Merge tag 'mtd/for-4.19-rc2' of git://git.infradead.org/linux-mtdLinus Torvalds2-2/+7
Pull mtd fixes from Boris Brezillon: "Raw NAND fixes: - denali: Fix a regression caused by the nand_scan() rework - docg4: Fix a build error when gcc decides to not iniline some functions (can be reproduced with gcc 4.1.2): * tag 'mtd/for-4.19-rc2' of git://git.infradead.org/linux-mtd: mtd: rawnand: denali: do not pass zero maxchips to nand_scan() mtd: rawnand: docg4: Remove wrong __init annotations
2018-08-30Merge tag 'mmc-v4.19-2' of ↵Linus Torvalds5-14/+25
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix unsupported parallel dispatch of requests MMC host: - atmel-mci/android-goldfish: Fixup logic of sg_copy_{from,to}_buffer - renesas_sdhi_internal_dmac: Prevent IRQ-storm due of DMAC IRQs - renesas_sdhi_internal_dmac: Fixup bad register offset" * tag 'mmc-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi_internal_dmac: mask DMAC interrupts mmc: renesas_sdhi_internal_dmac: fix #define RST_RESERVED_BITS mmc: block: Fix unsupported parallel dispatch of requests mmc: android-goldfish: fix bad logic of sg_copy_{from,to}_buffer conversion mmc: atmel-mci: fix bad logic of sg_copy_{from,to}_buffer conversion
2018-08-30arm/arm64: smccc-1.1: Handle function result as parametersMarc Zyngier1-10/+20
If someone has the silly idea to write something along those lines: extern u64 foo(void); void bar(struct arm_smccc_res *res) { arm_smccc_1_1_smc(0xbad, foo(), res); } they are in for a surprise, as this gets compiled as: 0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d4000003 smc #0x0 5ac: b4000073 cbz x19, 5b8 <bar+0x30> 5b0: a9000660 stp x0, x1, [x19] 5b4: a9010e62 stp x2, x3, [x19, #16] 5b8: f9400bf3 ldr x19, [sp, #16] 5bc: a8c27bfd ldp x29, x30, [sp], #32 5c0: d65f03c0 ret 5c4: d503201f nop The call to foo "overwrites" the x0 register for the return value, and we end up calling the wrong secure service. A solution is to evaluate all the parameters before assigning anything to specific registers, leading to the expected result: 0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d28175a0 mov x0, #0xbad 5ac: d4000003 smc #0x0 5b0: b4000073 cbz x19, 5bc <bar+0x34> 5b4: a9000660 stp x0, x1, [x19] 5b8: a9010e62 stp x2, x3, [x19, #16] 5bc: f9400bf3 ldr x19, [sp, #16] 5c0: a8c27bfd ldp x29, x30, [sp], #32 5c4: d65f03c0 ret Reported-by: Julien Grall <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-08-30x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember()Uros Bizjak1-3/+4
Replace open-coded set instructions with CC_SET()/CC_OUT(). Signed-off-by: Uros Bizjak <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-08-30x86/alternatives: Lockdep-enforce text_mutex in text_poke*()Jiri Kosina1-4/+5
text_poke() and text_poke_bp() must be called with text_mutex held. Put proper lockdep anotation in place instead of just mentioning the requirement in a comment. Reported-by: Peter Zijlstra <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Andy Lutomirski <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-08-30objtool: Remove workaround for unreachable warnings from old GCCMasahiro Yamada1-2/+0
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") bumped the minimum GCC version to 4.6 for all architectures. This effectively reverts commit da541b20021c ("objtool: Skip unreachable warnings for GCC 4.4 and older"), which was a workaround for GCC 4.4 or older. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Josh Poimboeuf <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Michal Marek <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-30notifier: Remove notifier header file wherever not usedMukesh Ojha7-7/+0
The conversion of the hotplug notifiers to a state machine left the notifier.h includes around in some places. Remove them. Signed-off-by: Mukesh Ojha <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-08-30watchdog: Mark watchdog touch functions as notraceVincent Whitchurch3-4/+4
Some architectures need to use stop_machine() to patch functions for ftrace, and the assumption is that the stopped CPUs do not make function calls to traceable functions when they are in the stopped state. Commit ce4f06dcbb5d ("stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE") added calls to the watchdog touch functions from the stopped CPUs and those functions lack notrace annotations. This leads to crashes when enabling/disabling ftrace on ARM kernels built with the Thumb-2 instruction set. Fix it by adding the necessary notrace annotations. Fixes: ce4f06dcbb5d ("stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE") Signed-off-by: Vincent Whitchurch <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-30x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit()Jann Horn1-0/+4
Reset the KASAN shadow state of the task stack before rewinding RSP. Without this, a kernel oops will leave parts of the stack poisoned, and code running under do_exit() can trip over such poisoned regions and cause nonsensical false-positive KASAN reports about stack-out-of-bounds bugs. This does not wipe the exception stacks; if an oops happens on an exception stack, it might result in random KASAN false-positives from other tasks afterwards. This is probably relatively uninteresting, since if the kernel oopses on an exception stack, there are most likely bigger things to worry about. It'd be more interesting if vmapped stacks and KASAN were compatible, since then handle_stack_overflow() would oops from exception stack context. Fixes: 2deb4be28077 ("x86/dumpstack: When OOPSing, rewind the stack before do_exit()") Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Andrey Ryabinin <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Kees Cook <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-30x86/irqflags: Mark native_restore_fl extern inlineNick Desaulniers1-1/+2
This should have been marked extern inline in order to pick up the out of line definition in arch/x86/kernel/irqflags.S. Fixes: 208cbb325589 ("x86/irqflags: Provide a declaration for native_save_fl") Reported-by: Ben Hutchings <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-30x86/build: Remove jump label quirk for GCC older than 4.5.2Masahiro Yamada2-16/+0
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") bumped the minimum GCC version to 4.6 for all architectures. Remove the workaround code. It was the only user of cc-if-fullversion. Remove the macro as well. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Michal Marek <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-30mac80211: always account for A-MSDU header changesJohannes Berg1-5/+7
In the error path of changing the SKB headroom of the second A-MSDU subframe, we would not account for the already-changed length of the first frame that just got converted to be in A-MSDU format and thus is a bit longer now. Fix this by doing the necessary accounting. It would be possible to reorder the operations, but that would make the code more complex (to calculate the necessary pad), and the headroom expansion should not fail frequently enough to make that worthwhile. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Johannes Berg <[email protected]> Acked-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-08-30mac80211: do not convert to A-MSDU if frag/subframe limitedLorenzo Bianconi1-3/+3
Do not start to aggregate packets in a A-MSDU frame (converting the first subframe to A-MSDU, adding the header) if max_tx_fragments or max_amsdu_subframes limits are already exceeded by it. In particular, this happens when drivers set the limit to 1 to avoid A-MSDUs at all. Signed-off-by: Lorenzo Bianconi <[email protected]> [reword commit message to be more precise] Signed-off-by: Johannes Berg <[email protected]>
2018-08-30cfg80211: nl80211_update_ft_ies() to validate NL80211_ATTR_IEArunk Khandavalli1-0/+1
nl80211_update_ft_ies() tried to validate NL80211_ATTR_IE with is_valid_ie_attr() before dereferencing it, but that helper function returns true in case of NULL pointer (i.e., attribute not included). This can result to dereferencing a NULL pointer. Fix that by explicitly checking that NL80211_ATTR_IE is included. Fixes: 355199e02b83 ("cfg80211: Extend support for IEEE 802.11r Fast BSS Transition") Signed-off-by: Arunk Khandavalli <[email protected]> Signed-off-by: Jouni Malinen <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-08-29Merge branch 'net_sched-reject-unknown-tcfa_action-values'David S. Miller2-5/+59
Paolo Abeni says: ==================== net_sched: reject unknown tcfa_action values As agreed some time ago, this changeset reject unknown tcfa_action values, instead of changing such values under the hood. A tdc test is included to verify the new behavior. v1 -> v2: - helper is now static and renamed according to act_* convention - updated extack message, according to the new behavior ==================== Reviewed-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.