| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
dma_map_sg return 0 on error, fix the error check, and return -EIO
to caller.
Fixes: dbc049eee730 ("mailbox: Add driver for Broadcom FlexRM ring manager")
Signed-off-by: Jack Wang <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
IPQ8074 has the APSS clock controller utilizing the same register space as
the APCS, so provide access to the APSS utilizing a child device like
IPQ6018.
IPQ6018 and IPQ8074 use the same controller and driver, so just utilize
IPQ6018 match data for IPQ8074.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
IPQ6018 APSS driver is registered by APCS as they share the same register
space, and it uses "pll" and "xo" as inputs.
Correct the allowed clocks for IPQ6018 and IPQ8074 as they share the same
driver to allow "pll" and "xo" as clock-names.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
IPQ6018 and IPQ8074 require #clock-cells to be set to 1 as their APSS
clock driver provides multiple clock outputs.
So allow setting 1 as #clock-cells and check that its set to 1 for IPQ6018
and IPQ8074, check others for 0 as its currently.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
The mailbox offset is not only used for receiving messages, but it is
also used by messages sent to the system controller by Linux that have a
payload, such as the "digital signature service". It is also overloaded
by certain other services (reprogramming of the FPGA fabric, see Link:)
to have a meaning other than the offset the system controller should
read from.
When the driver was written, no such services of the latter type were
in use & those of the former used an offset of zero so this has gone
un-noticed.
Link: https://www.microsemi.com/document-portal/doc_download/1245815-polarfire-fpga-and-polarfire-soc-fpga-system-services-user-guide # Section 5.2
Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Signed-off-by: Conor Dooley <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
The "data" region of the PolarFire SoC's system controller mailbox is
not one continuous register space - the system controller's QSPI sits
between the control and data registers. Split the "data" reg into two
parts: "data" & "control". Optionally get the "data" register address
from the 3rd reg property in the devicetree & fall back to using the
old base + MAILBOX_REG_OFFSET that the current code uses.
Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Signed-off-by: Conor Dooley <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
The "data" region of the PolarFire SoC's system controller mailbox is
not one continuous register space - the system controller's QSPI sits
between the control and data registers. Split the "data" reg into two
parts: "data" & "control".
Fixes: 213556235526 ("dt-bindings: soc/microchip: update syscontroller compatibles")
Fixes: ed9543d6f2c4 ("dt-bindings: add bindings for polarfire soc mailbox")
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
Because IMX_MU_xCR_MAX was increased to 5, some mu cfgs were not updated
to include the CR register. Add the missed CR register to xcr array.
Fixes: 82ab513baed5 ("mailbox: imx: support RST channel")
Reported-by: Liu Ying <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Tested-by: Liu Ying <[email protected]> # i.MX8qm/qxp MEK boards boot
Signed-off-by: Jassi Brar <[email protected]>
|
|
When compat mode isn't supported(I believe this is the most case now),
kernel will emit somthing as:
[ 0.050407] riscv: ELF compat mode failed
This msg may make users think there's something wrong with the kernel
itself, replace "failed" with "unsupported" to make it clear. In fact
this is the real compat_mode_supported meaning. After the patch, the
msg would be:
[ 0.050407] riscv: ELF compat mode unsupported
Signed-off-by: Jisheng Zhang <[email protected]>
Acked-by: Guo Ren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
cpp_check reports
[drivers/power/supply/ab8500_chargalg.c:493]: (style) Variable 'ab8500_chargalg_ex_ac_enable_toggle' is assigned a value that is never used.
From inspection, this variable is never used. So remove it.
Fixes: 6c50a08d9dd3 ("power: supply: ab8500: Drop external charger leftovers")
Signed-off-by: Tom Rix <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Chen Lifu <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes are ASoC drivers (SOF, Intel, AMD, Mediatek,
Qualcomm, TI, Apple Silicon, etc), while we see a few small fixes in
ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual"
* tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (422 commits)
ALSA: hda: Fix position reporting on Poulsbo
ALSA: hda/hdmi: Don't skip notification handling during PM operation
ASoC: rockchip: i2s: use regmap_read_poll_timeout_atomic to poll I2S_CLR
ASoC: dt-bindings: Document audio OF graph dai-tdm-slot-num dai-tdm-slot-width props
ASoC: qcom: fix unmet direct dependencies for SND_SOC_QDSP6
ALSA: usb-audio: Fix potential memory leaks
ALSA: usb-audio: Fix NULL dererence at error path
ASoC: mediatek: mt8192-mt6359: Set the driver name for the card
ALSA: hda/realtek: More robust component matching for CS35L41
ASoC: Intel: sof_rt5682: remove SOF_RT1015_SPEAKER_AMP_100FS flag
ASoC: nau8825: Add TDM support
ASoC: core: clarify the driver name initialization
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
ASoC: wcd-mbhc-v2: Revert "ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()"
ASoC: mediatek: mt8186: Fix spelling mistake "slect" -> "select"
ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model
ALSA: asihpi - Remove unused struct hpi_subsys_response
...
|
|
Pull drm updates from Dave Airlie:
"Lots of stuff all over, some new AMD IP support and gang submit
support. i915 has further DG2 and Meteorlake pieces, and a bunch of
i915 display refactoring. msm has a shrinker rework. There are also a
bunch of conversions to use kunit.
This has two external pieces, some MEI changes needed for future Intel
discrete GPUs. These should be acked by Greg. There is also a cross
maintainer shared tree with some backlight rework from Hans in here.
Core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU:
simplified VBIF configuration
cleanup CTL interfaces
- DSI:
removed unused msm_display_dsc_config struct
switch regulator calls to new API
switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduce lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- improve error and edge conditions handling
- convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support"
* tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits)
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdkfd: Track unified memory when switching xnack mode
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
drm/msm: Fix build break with recent mm tree
drm/panel: simple: Use dev_err_probe() to simplify code
drm/panel: panel-edp: Use dev_err_probe() to simplify code
drm/panel: simple: Add Multi-Inno Technology MI0800FT-9
dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel
drm/amdgpu: correct the memcpy size for ip discovery firmware
drm/amdgpu: Skip put_reset_domain if it doesn't exist
drm/amdgpu: remove switch from amdgpu_gmc_noretry_set
drm/amdgpu: Fix mc_umc_status used uninitialized warning
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/amdgpu: add page retirement handling for CPU RAS
drm/amdgpu: use RAS error address convert api in mca notifier
drm/amdgpu: support to convert dedicated umc mca address
drm/amdgpu: export umc error address convert interface
drm/amdgpu: fix sdma v4 init microcode error
drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight update from Lee Jones:
- Add support for MediaTek MT6370 Backlight
* tag 'backlight-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
video: backlight: mt6370: Add MediaTek MT6370 support
dt-bindings: backlight: Add MediaTek MT6370 backlight
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec_proto:
- Fix protocol failure if EC firmware jumps to RO part
cros_typec_switch:
- Add USB Type-C switch driver for mode switches and retimers
- Integrate to EC for retimers, status update, and mode switches
- Clean-ups
cros_ec_typec:
- Clean-ups
- Use partner PDOs to register USB PD capabilities
chromeos_laptop:
- Fix a double-free
cros_ec_chardev:
- Check data length from userland to avoid a memory corruption
cros_ec:
- Expose suspend_timeout_ms in debugfs
- Notify the PM about wake events during resume"
* tag 'tag-chrome-platform-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec: Notify the PM of wake events during resume
platform/chrome: cros_ec_typec: Register partner PDOs
platform/chrome: cros_typec_switch: Inline DRV_NAME
platform/chrome: cros_typec_switch: Use PTR_ERR_OR_ZERO() to simplify
platform/chrome: cros_typec_switch: Remove impossible condition
platform/chrome: cros_typec_switch: Add missing newline on printk
platform/chrome: cros_ec_typec: Correct alt mode index
platform/chrome: cros_ec_typec: Add bit offset for DP VDO
platform/chrome: cros_ec: Expose suspend_timeout_ms in debugfs
platform/chrome: fix memory corruption in ioctl
platform/chrome: fix double-free in chromeos_laptop_prepare()
platform/chrome: cros_ec_typec: Get retimer handle
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
platform/chrome: cros_typec_switch: Register mode switches
platform/chrome: cros_typec_switch: Add event check
platform/chrome: cros_typec_switch: Set EC retimer
platform/chrome: cros_typec_switch: Add switch driver
platform/chrome: Add Type-C mux set command definitions
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
|
|
"module.h" does not exist in kselftest, it should be "kselftest_module.h".
Signed-off-by: Hoi Pok Wu <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This kernel module is used for testing. It's safe to say M here.
It can also be built-in without X86_AMD_PSTATE enabled.
Currently, only tests for amd-pstate are supported. If X86_AMD_PSTATE
is set disabled, it can tell the users test can only run on amd-pstate
driver, please set X86_AMD_PSTATE enabled.
In the future, comparison tests will be added. It can set amd-pstate
disabled and set acpi-cpufreq enabled to run test cases, then compare
the test results.
Suggested-by: Shuah Khan <[email protected]>
Signed-off-by: Meng Li <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add log information when run full test successfully.
Signed-off-by: Zhao Gongyi <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Considering that we can not offline all cpus in any cases,
we need to reserve one cpu online when the test offline all
hotpluggable online cpus, otherwise the test will fail forever.
Fixes: d89dffa976bc ("fault-injection: add selftests for cpu and memory hotplug")
Signed-off-by: Zhao Gongyi <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Delete fault injection related code since the module has been deleted.
Signed-off-by: Zhao Gongyi <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Some cpus will be left in offline state when online
function exits in some error conditions. Use return
instead of exit to fix it.
Signed-off-by: Zhao Gongyi <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Correct the log info to match the test.
Signed-off-by: Zhao Gongyi <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Modify restricted FMODE_PREAD to experted int O_RDONLY to
fix the sparse warnings below:
sparse warnings: (new ones prefixed by >>)
>> drivers/cpufreq/amd-pstate-ut.c:74:40: sparse: sparse: incorrect type
>> in argument 2 (different base types) @@ expected int @@ got
>> restricted fmode_t [usertype] @@
drivers/cpufreq/amd-pstate-ut.c:74:40: sparse: expected int
drivers/cpufreq/amd-pstate-ut.c:74:40: sparse: got restricted
fmode_t [usertype]
Signed-off-by: Meng Li <[email protected]>
Reported-by: kernel test robot <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Introduce the AMD P-State unit test module design and implementation.
It also talks about kselftest and how to use.
Signed-off-by: Meng Li <[email protected]>
Acked-by: Huang Rui <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add amd-pstate test trigger in kselftest, it will load/unload
amd-pstate-ut module to test some cases etc.
Signed-off-by: Meng Li <[email protected]>
Acked-by: Huang Rui <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add amd-pstate-ut test module, this module is used by kselftest
to unit test amd-pstate functionality. This module will be
expected by some of selftests to be present and loaded.
Signed-off-by: Meng Li <[email protected]>
Acked-by: Huang Rui <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Expose struct amd_cpudata to AMD P-State unit test module.
This data struct will be used on the following AMD P-State unit test
(amd-pstate-ut) module. The amd-pstate-ut module can get some
AMD infomations by this data struct. For example: highest perf,
nominal perf, boost supported etc.
Signed-off-by: Meng Li <[email protected]>
Acked-by: Huang Rui <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
In various places both in t/t/s/v/Makefile as well as some of the test
sources, we were referring to headers or directories using some fairly
long relative paths.
Since we have a working top_srcdir variable though, which refers to the
root of the kernel tree, we can clean up all of these "up and over"
relative paths, just relying on the single variable instead.
Signed-off-by: Axel Rasmussen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Pull MMC updates from Ulf Hansson:
- dt-bindings: Increase maximum supported frequency to 384MHz
- dw_mmc-rockchip: Add support for the rk3128 variant
- meson-gx: Add support for SDIO interrupts
- mtk-sd: Add support for MT6795 Helio X10 variant
- sdhci: Improve the code by centralizing the CMD/DATA reset handling
- sdhci-msm:
- Add support for the sdm670 variant
- Add support for the sm6115 variant
- sdhci-omap: Make Vignesh replace Kishon as the maintainer
- sdhci-pci-o2micro: Disable fragile support for DDR50 in favor of
SDR50
- sdhci-sprd: Fix clock divider limitation
* tag 'mmc-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (31 commits)
mmc: sdhci: Centralize CMD and DATA reset handling
mmc: sdhci: Get rid of SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS
mmc: sdhci: Remove misleading comment about resets
mmc: sdhci: Separate out sdhci_reset_for_all()
MAINTAINERS: Add Vignesh as maintainer of TI SDHCI OMAP DRIVER
mmc: sdhci-msm: add compatible string check for sdm670
dt-bindings: mmc: sdhci-msm: add sdm670 compatible
mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
mmc: rtsx_usb_sdmmc: Remove the unneeded result variable
mmc: sdhci-of-aspeed: Add dependency on ARCH_ASPEED
mmc: mtk-sd: Add support for MT6795 Helio X10
mmc: mtk-sd: Reorder of_device_id and platform data by name
mmc: sdhci-sprd: Fix the limitation of div
dt-bindings: mmc: sdhci-msm: Add pinctrl-1 property
dt-bindings: mmc: rockchip: add rockchip,rk3128-dw-mshc
dt-bindings: mmc: renesas,sdhi: Add iommus property
mmc: sdhci_am654: Remove the unneeded result variable
mmc: meson-gx: add SDIO interrupt support
mmc: meson-gx: adjust and re-use constant IRQ_EN_MASK
mmc: jz4740_mmc: Fix error check for dma_map_sg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull PCMCIA updates from Dominik Brodowski:
"Odd cleanups and fixes for v6.1
Remove the obsolete VR41XX and AT91RM9200 Compact Flash drivers, and
fix some minor coding issues (__init/__exit annotations, unused
variable)"
* tag 'pcmcia-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: remove AT91RM9200 Compact Flash driver
pcmcia: Removed unused variable control.
pcmcia: Add __init/__exit annotations to module init/exit funcs
pcmcia: at91_cf: make mc static
pcmcia: remove VR41XX PCMCIA driver
pcmcia: sa1100: Make sa11x0_drv_pcmcia_legacy_remove() return void
|
|
The checkpatch tool complains that "virtio,rproc" is not documented.
But it is not possible to probe the device "rproc-virtio" by declaring
it in the device tree. So documenting it in the bindings does not make
sense.
This commit solves the checkpatch warning by suppressing the useless
of_match_table.
Suggested-by: Rob Herring <[email protected]>
Fixes: 1d7b61c06dc3 ("remoteproc: virtio: Create platform device for the remoteproc_virtio")
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
When building with CONFIG_LTO after commit ba00c2a04fa5 ("arm64: fix the
build with binutils 2.27"), the following build error occurs:
In file included from arch/arm64/kernel/module-plts.c:6:
In file included from include/linux/elf.h:6:
In file included from arch/arm64/include/asm/elf.h:8:
In file included from arch/arm64/include/asm/hwcap.h:9:
In file included from arch/arm64/include/asm/cpufeature.h:9:
In file included from arch/arm64/include/asm/alternative-macros.h:5:
In file included from include/linux/bits.h:22:
In file included from include/linux/build_bug.h:5:
In file included from include/linux/compiler.h:248:
In file included from arch/arm64/include/asm/rwonce.h:71:
include/asm-generic/rwonce.h:67:9: error: expected string literal in 'asm'
return __READ_ONCE(*(unsigned long *)addr);
^
arch/arm64/include/asm/rwonce.h:43:16: note: expanded from macro '__READ_ONCE'
asm volatile(__LOAD_RCPC(b, %w0, %1) \
^
arch/arm64/include/asm/rwonce.h:17:2: note: expanded from macro '__LOAD_RCPC'
ALTERNATIVE( \
^
Similar to the issue resolved by commit 0072dc1b53c3 ("arm64: avoid
BUILD_BUG_ON() in alternative-macros"), there is a circular include
dependency through <linux/bits.h> when CONFIG_LTO is enabled due to
<asm/rwonce.h> appearing in the include chain before the contents of
<asm/alternative-macros.h>, which results in ALTERNATIVE() not getting
expanded properly because it has not been defined yet.
Avoid this issue by including <vdso/bits.h>, which includes the
definition of the BIT() macro, instead of <linux/bits.h>, as BIT() is the
only macro from bits.h that is relevant to this header.
Fixes: ba00c2a04fa5 ("arm64: fix the build with binutils 2.27")
Link: https://github.com/ClangBuiltLinux/linux/issues/1728
Signed-off-by: Nathan Chancellor <[email protected]>
Tested-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
- convert to use dev_groups (Greg Kroah-Hartman)
|
|
- compilation warning fix (Jiangshan Yi)
|
|
- Simplify comments (Christophe JAILLET)
|
|
- Add UGEEv2 support (XP-PEN Deco Pro S and Parblo A610 PRO) (José
Expósito)
|
|
- Support for various RC controllers (Marcus Folkesson)
|
|
- Fix Topre REALFORCE R2 keyboard so it can send more than 6 keys at the
time (Harry Stern)
|
|
- better support of Nintendo clone controllers (Icenowy Zheng and
Johnothan King)
|
|
- reduce verbosity of amd_sfh driver (Basavaraj Natikar)
- better handling of devices with SFH1.1 (Basavaraj Natikar)
|
|
- fix broken atomic checks by adding memory barriers (Andri Yngvason)
|
|
- playstation: convert to use dev_groups (Greg Kroah-Hartman)
|
|
- Add hanlding of all Bluetooth HID++ devices and fixes in hid++
(Bastien Nocera)
|
|
- move from strlcpy with unused retval to strscpy (Wolfram Sang)
- Kconfig fixes (Randy Dunlap)
- HID-BPF preparatory patches, convert blank defines as enums (Benjamin
Tissoires)
|
|
Adding the #address-cells/#size-cells properties without also
adding the other required properties for PCI nodes causes new
build warnings from dtc that now show up everywhere, rather than
just while verifying the yaml bindings:
arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge)
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Revert it for now.
Fixes: 61dc1e3850a6 ("ARM: dts: BCM5301X: Add basic PCI controller properties")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Share config response may contain the share name without casefolding as
it is known to the user space daemon. When it is present, casefold and
compare it to the share name the share config request was made with. If
they differ, we have a share config which is incompatible with the way
share config caching is done. This is the case when CONFIG_UNICODE is
not set, the share name contains non-ASCII characters, and those non-
ASCII characters do not match those in the share name known to user
space. In other words, when CONFIG_UNICODE is not set, UTF-8 share
names now work but are only case-insensitive in the ASCII range.
Signed-off-by: Atte Heikkilä <[email protected]>
Acked-by: Tom Talpey <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
When disconnected, call ib_drain_qp to cancel all pending work requests
and prevent ksmbd_conn_handler_loop from waiting for a long time
for those work requests to compelete.
Signed-off-by: Hyunchul Lee <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Reviewed-by: Tom Talpey <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Case-insensitive file name lookups with __caseless_lookup() use
strncasecmp() for file name comparison. strncasecmp() assumes an
ISO8859-1-compatible encoding, which is not the case here as UTF-8
is always used. As such, use of strncasecmp() here produces correct
results only if both strings use characters in the ASCII range only.
Fix this by using utf8_strncasecmp() if CONFIG_UNICODE is set. On
failure or if CONFIG_UNICODE is not set, fallback to strncasecmp().
Also, as we are adding an include for `linux/unicode.h', include it
in `fs/ksmbd/connection.h' as well since it should be explicit there.
Signed-off-by: Atte Heikkilä <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
A kernel daemon should not rely on the current thread, which is unknown
and might be malicious. Before this security fix,
ksmbd_override_fsids() didn't correctly override FS UID/GID which means
that arbitrary user space threads could trick the kernel to impersonate
arbitrary users or groups for file system access checks, leading to
file system access bypass.
This was found while investigating truncate support for Landlock:
https://lore.kernel.org/r/CAKYAXd8fpMJ7guizOjHgxEyyjoUwPsx3jLOPZP=wPYcbhkVXqA@mail.gmail.com
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: Hyunchul Lee <[email protected]>
Cc: Steve French <[email protected]>
Cc: [email protected]
Signed-off-by: Mickaël Salaün <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Christian Brauner (Microsoft) <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
When ipv6 config is disable(CONFIG_IPV6 is not set), ksmbd fallback to
create ipv4 socket. User reported that this error message lead to
misunderstood some issue. Users have requested not to print this error
message that occurs even though there is no problem.
Signed-off-by: Namjae Jeon <[email protected]>
Acked-by: Tom Talpey <[email protected]>
Signed-off-by: Steve French <[email protected]>
|