| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It turned out that polling period for MMC_SEND_OP_COND, that currently is
set to 1ms, still isn't sufficient. In particular a Micron eMMC on a
Beaglebone platform, is reported to sometimes fail to initialize.
Additional test, shows that extending the period to 4ms is working fine, so
let's make that change.
Reported-by: Jean Rene Dawin <[email protected]>
Tested-by: Jean Rene Dawin <[email protected]>
Fixes: 1760fdb6fe9f (mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND")
Fixes: 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1")
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The function has only a single caller and two lines. Just remove it
since it is pointless and just harming readability.
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
We store struct bfq_io_cq pointer in rq->elv.priv[0] in bfq_init_rq().
Thus a call to icq_to_bic() in RQ_BIC() is wrong. Luckily it does no
harm currently because struct io_iq is the first one in struct
bfq_io_cq.
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The code in bfq_check_waker() ignores wake up events from the current
waker. This makes it more likely we select a new tentative waker
although the current one is generating more wake up events. Treat
current waker the same way as any other process and allow it to reset
the waker detection logic.
Fixes: 71217df39dc6 ("block, bfq: make waker-queue detection more robust")
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Currently we look for waker only if current queue has no requests. This
makes sense for bfq queues with a single process however for shared
queues when there is a larger number of processes the condition that
queue has no requests is difficult to meet because often at least one
process has some request in flight although all the others are waiting
for the waker to do the work and this harms throughput. Relax the "no
queued request for bfq queue" condition to "the current task has no
queued requests yet". For this, we also need to start tracking number of
requests in flight for each task.
This patch (together with the following one) restores the performance
for dbench with 128 clients that regressed with commit c65e6fd460b4
("bfq: Do not let waker requests skip proper accounting") because
this commit makes requests of wakers properly enter BFQ queues and thus
these queues become ineligible for the old waker detection logic.
Dbench results:
Vanilla 5.18-rc3 5.18-rc3 + revert 5.18-rc3 patched
Mean 1237.36 ( 0.00%) 950.16 * 23.21%* 988.35 * 20.12%*
Numbers are time to complete workload so lower is better.
Fixes: c65e6fd460b4 ("bfq: Do not let waker requests skip proper accounting")
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
When running as dom0less guest (HVM domain on ARM) the xenstore event
channel is available at domain creation but the shared xenstore
interface page only becomes available later on.
In that case, wait for a notification on the xenstore event channel,
then complete the xenstore initialization later, when the shared page
is actually available.
The xenstore page has few extra field. Add them to the shared struct.
One of the field is "connection", when the connection is ready, it is
zero. If the connection is not-zero, wait for a notification.
Signed-off-by: Luca Miccio <[email protected]>
Signed-off-by: Stefano Stabellini <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Sync the xs_wire.h header file in Linux with the one in Xen.
Signed-off-by: Stefano Stabellini <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Since commit 4d65adfcd119 ("x86: xen: insn: Decode Xen and KVM
emulate-prefix signature"), objtool is able to correctly parse the
prefixed instruction in xen_cpuid and emit correct orc unwind
information. Hence, marking the function as STACKFRAME_NON_STANDARD is
no longer needed.
This commit is basically a revert of commit 983bb6d254c7 ("x86/xen: Mark
xen_cpuid() stack frame as non-standard").
Signed-off-by: Maximilian Heyne <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
CC: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
and feature_persistent
SeongJae is currently listed as a contact point for some blk{back,front}
features, but he will not work for XEN for a while. This commit
therefore updates the contact point to his colleague, Maximilian, who is
understanding the context and actively working with the features now.
Signed-off-by: SeongJae Park <[email protected]>
Signed-off-by: Maximilian Heyne <[email protected]>
Acked-by: Roger Pau Monné <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Commit 505a666ee3fc ("writeback: plug writeback in wb_writeback() and
writeback_inodes_wb()") has us holding a plug during wb_writeback, which
may cause a potential ABBA dead lock:
wb_writeback fat_file_fsync
blk_start_plug(&plug)
for (;;) {
iter i-1: some reqs have been added into plug->mq_list // LOCK A
iter i:
progress = __writeback_inodes_wb(wb, work)
. writeback_sb_inodes // fat's bdev
. __writeback_single_inode
. . generic_writepages
. . __block_write_full_page
. . . . __generic_file_fsync
. . . . sync_inode_metadata
. . . . writeback_single_inode
. . . . __writeback_single_inode
. . . . fat_write_inode
. . . . __fat_write_inode
. . . . sync_dirty_buffer // fat's bdev
. . . . lock_buffer(bh) // LOCK B
. . . . submit_bh
. . . . blk_mq_get_tag // LOCK A
. . . trylock_buffer(bh) // LOCK B
. . . redirty_page_for_writepage
. . . wbc->pages_skipped++
. . --wbc->nr_to_write
. wrote += write_chunk - wbc.nr_to_write // wrote > 0
. requeue_inode
. redirty_tail_locked
if (progress) // progress > 0
continue;
iter i+1:
queue_io
// similar process with iter i, infinite for-loop !
}
blk_finish_plug(&plug) // flush plug won't be called
Above process triggers a hungtask like:
[ 399.044861] INFO: task bb:2607 blocked for more than 30 seconds.
[ 399.046824] Not tainted 5.18.0-rc1-00005-gefae4d9eb6a2-dirty
[ 399.051539] task:bb state:D stack: 0 pid: 2607 ppid:
2426 flags:0x00004000
[ 399.051556] Call Trace:
[ 399.051570] __schedule+0x480/0x1050
[ 399.051592] schedule+0x92/0x1a0
[ 399.051602] io_schedule+0x22/0x50
[ 399.051613] blk_mq_get_tag+0x1d3/0x3c0
[ 399.051640] __blk_mq_alloc_requests+0x21d/0x3f0
[ 399.051657] blk_mq_submit_bio+0x68d/0xca0
[ 399.051674] __submit_bio+0x1b5/0x2d0
[ 399.051708] submit_bio_noacct+0x34e/0x720
[ 399.051718] submit_bio+0x3b/0x150
[ 399.051725] submit_bh_wbc+0x161/0x230
[ 399.051734] __sync_dirty_buffer+0xd1/0x420
[ 399.051744] sync_dirty_buffer+0x17/0x20
[ 399.051750] __fat_write_inode+0x289/0x310
[ 399.051766] fat_write_inode+0x2a/0xa0
[ 399.051783] __writeback_single_inode+0x53c/0x6f0
[ 399.051795] writeback_single_inode+0x145/0x200
[ 399.051803] sync_inode_metadata+0x45/0x70
[ 399.051856] __generic_file_fsync+0xa3/0x150
[ 399.051880] fat_file_fsync+0x1d/0x80
[ 399.051895] vfs_fsync_range+0x40/0xb0
[ 399.051929] __x64_sys_fsync+0x18/0x30
In my test, 'need_resched()' (which is imported by 590dca3a71 "fs-writeback:
unplug before cond_resched in writeback_sb_inodes") in function
'writeback_sb_inodes()' seldom comes true, unless cond_resched() is deleted
from write_cache_pages().
Fix it by correcting wrote number according number of skipped pages
in writeback_sb_inodes().
Goto Link to find a reproducer.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215837
Cc: [email protected] # v4.3
Signed-off-by: Zhihao Cheng <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
There is no external user of xenbus_grant_ring() left, so merge it into
the only caller xenbus_setup_ring().
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Simplify sndfront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Tested-by: Oleksandr Tyshchenko <[email protected]> # Arm64 only
Signed-off-by: Juergen Gross <[email protected]>
|
|
Simplify xen-hcd's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Simplify scsifront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Simplify pcifront's shared page creation and removal via
xenbus_setup_ring() and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Simplify drmfront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Tested-by: Oleksandr Tyshchenko <[email protected]> # Arm64 only
Signed-off-by: Juergen Gross <[email protected]>
|
|
Simplify tpmfront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring(), which are provided exactly for the use
pattern as seen in this driver.
Signed-off-by: Juergen Gross <[email protected]>
|
|
Simplify netfront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Simplify blkfront's ring creation and removal via xenbus_setup_ring()
and xenbus_teardown_ring().
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Acked-by: Roger Pau Monné <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Most PV device frontends share very similar code for setting up shared
ring buffers:
- allocate page(s)
- init the ring admin data
- give the backend access to the ring via grants
Tearing down the ring requires similar actions in all frontends again:
- remove grants
- free the page(s)
Provide service functions xenbus_setup_ring() and xenbus_teardown_ring()
for that purpose.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Update include/xen/interface/io/ring.h to its newest version.
Switch the two improper use cases of RING_HAS_UNCONSUMED_RESPONSES() to
XEN_RING_NR_UNCONSUMED_RESPONSES() in order to avoid the nasty
XEN_RING_HAS_UNCONSUMED_IS_BOOL #define.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Tested-by: Oleksandr Tyshchenko <[email protected]> # Arm64 only
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Tested-by: Oleksandr Tyshchenko <[email protected]> # Arm64 only
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Oleksandr Tyshchenko <[email protected]>
Tested-by: Oleksandr Tyshchenko <[email protected]> # Arm64 only
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
GRANT_INVALID_REF isn't used in scsifront, so remove it.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Acked-by: Roger Pau Monné <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Make sure a reserved grant is never put on the free list, as this could
cause hard to debug errors.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Update include/xen/interface/grant_table.h to its newest version.
This allows to drop some private definitions in grant-table.c and
include/xen/grant_table.h.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of relying on a well behaved PV scsi backend verify all meta
data received from the backend and avoid multiple reads of the same
data from the shared ring page.
In case any illegal data from the backend is detected switch the
PV device to a new "error" state and deactivate it for further use.
Use the "lateeoi" variant for the event channel in order to avoid
event storms blocking the guest.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Add a translation layer for the command result values.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Instead of using the kernel's values for the result of PV scsi
operations use the values of the interface definition.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
Update include/xen/interface/io/vscsiif.h to its newest version.
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
|
|
GCC 11 (incorrectly[1]) assumes that literal values cast to (void *)
should be treated like a NULL pointer with an offset, and raises
diagnostics when doing bounds checking under -Warray-bounds. GCC 12
got "smarter" about finding these:
In function 'rdfs8',
inlined from 'vga_recalc_vertical' at /srv/code/arch/x86/boot/video-mode.c:124:29,
inlined from 'set_mode' at /srv/code/arch/x86/boot/video-mode.c:163:3:
/srv/code/arch/x86/boot/boot.h:114:9: warning: array subscript 0 is outside array bounds of 'u8[0]' {aka 'unsigned char[]'} [-Warray-bounds]
114 | asm volatile("movb %%fs:%1,%0" : "=q" (v) : "m" (*(u8 *)addr));
| ^~~
This has been solved in other places[2] already by using the recently
added absolute_pointer() macro. Do the same here.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
[2] https://lore.kernel.org/all/[email protected]/
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When removing short term pins, I've changed the the batch buffer
pinning for relocation to use __i915_vma_pin, because
i915_gem_object_ggtt_pin_ww was destroying the old vma. This
caused regressions, because the functions are not identical.
Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again
on ggtt-only platforms, but only if the batch can be pinned without
being moved.
Fixes: b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.")
Cc: Matthew Auld <[email protected]>
Reported-by: Mateusz Jończyk <[email protected]>
Tested-by: Hans de Goede <[email protected]>
Signed-off-by: Maarten Lankhorst <[email protected]>
Acked-by: Matthew Auld <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 451374eef622fca6f00eeeda89aaccb45a30a149)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
When returning to user space, %rsp is user-controlled value.
If it is a SNP-guest and the hypervisor decides to mess with the
code-page for this path while a CPU is executing it, a potential #VC
could hit in the syscall return path and mislead the #VC handler.
So make ip_within_syscall_gap() return true in this case.
Signed-off-by: Lai Jiangshan <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Joerg Roedel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add support for getting the boot hart ID from the Linux EFI stub using
RISCV_EFI_BOOT_PROTOCOL. This method is preferred over the existing DT
based approach since it works irrespective of DT or ACPI.
The specification of the protocol is hosted at:
https://github.com/riscv-non-isa/riscv-uefi
Signed-off-by: Sunil V L <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ardb: minor tweaks for coding style and whitespace]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:
br1
/ \
/ \
/ \
br0.11 wlan0
|
br0
/ | \
p1 p2 p3
br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.
A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.
When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().
Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark")
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
In the detach path, the driver calls sysfs_remove_group() for the
groups it believes has been registered. However, if the group was
never previously registered, then this causes a splat.
Instead, compute the groups that should be registered in advance,
and then call sysfs_create_groups(), which registers them all at once.
Update the error handling appropriately.
Fixes: c205d53c4923 ("ptp: ocp: Add firmware capability bits for feature gating")
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Jonathan Lemon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.18-2022-05-18:
amdgpu:
- Suspend/resume regression fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Fix missing backslash, introduced in f62c5acc800ee. Causes all tests to
not be installed.
Fixes: f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <[email protected]>
Acked-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Reduce number of hardware offload retries from flowtable datapath
which might hog system with retries, from Felix Fietkau.
2) Skip neighbour lookup for PPPoE device, fill_forward_path() already
provides this and set on destination address from fill_forward_path for
PPPoE device, also from Felix.
4) When combining PPPoE on top of a VLAN device, set info->outdev to the
PPPoE device so software offload works, from Felix.
5) Fix TCP teardown flowtable state, races with conntrack gc might result
in resetting the state to ESTABLISHED and the time to one day. Joint
work with Oz Shlomo and Sven Auhagen.
6) Call dst_check() from flowtable datapath to check if dst is stale
instead of doing it from garbage collector path.
7) Disable register tracking infrastructure, either user-space or
kernel need to pre-fetch keys inconditionally, otherwise register
tracking assumes data is already available in register that might
not well be there, leading to incorrect reductions.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disable expression reduction infra
netfilter: flowtable: move dst_check to packet path
netfilter: flowtable: fix TCP flow teardown
netfilter: nft_flow_offload: fix offload with pppoe + vlan
net: fix dev_fill_forward_path with pppoe + bridge
netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices
netfilter: flowtable: fix excessive hw offload attempts after failure
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull block fix from Jens Axboe:
"Just a small fix for a missing fifo time assigment for the head
insertion case in mq-deadline"
* tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
block/mq-deadline: Set the fifo_time member also if inserting at head
|
|
Pull io_uring fixes from Jens Axboe:
"Two small changes fixing issues from the 5.18 merge window:
- Fix wrong ordering of a tracepoint (Dylan)
- Fix MSG_RING on IOPOLL rings (me)"
* tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
io_uring: don't attempt to IOPOLL for MSG_RING requests
io_uring: fix ordering of args in io_uring_queue_async_work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single audit patch to fix a problem where a task's audit_context was
not being properly reset with io_uring"
* tag 'audit-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit,io_uring,io-wq: call __audit_uring_exit for dummy contexts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A single SELinux patch to fix an error path that was doing the wrong
thing with respect to freeing memory"
* tag 'selinux-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix bad cleanup on error in hashtab_duplicate()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The SoC bug fixes have calmed down sufficiently, there is one minor
update for the MAINTAINERS file, and few bug fixes for dts
descriptions:
- Updates to the BananaPi R2-Pro (rk3568) dts to match production
hardware rather than the prototype version.
- Qualcomm sm8250 soundwire gets disabled on some machines to avoid
crashes
- A number of aspeed SoC specific fixes, addressing incorrect pin
cotrol settings, some values in the romed8hm board, and a revert
for an accidental removal of a DT node"
* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: omap: remove me as a maintainer
ARM: dts: aspeed: Add video engine to g6
ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
arm64: dts: rockchip: Change io-domains of bpi-r2-pro
|
|
Pull misc fixes from Al Viro:
"vhost race fix and a percpu_ref_init-caused cgroup double-free fix.
The latter had manifested as buggered struct mount refcounting - those
are also using percpu data structures, but anything that does percpu
allocations could be hit"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Fix double fget() in vhost_net_set_backend()
percpu_ref_init(): clean ->percpu_count_ref on failure
|