aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-08-02Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds6-17/+43
Pull ARM fixes from Russell King: "A few fixes for ARM. Some of these are correctness issues: - TLBs must be flushed after the old mappings are removed by the DMA mapping code, but before the new mappings are established. - An off-by-one entry error in the Keystone LPAE setup code. Fixes include: - ensuring that the identity mapping for LPAE does not remove the kernel image from the identity map. - preventing userspace from trapping into kgdb. - fixing a preemption issue in the Intel iwmmxt code. - fixing a build error with nommu. Other changes include: - Adding a note about which areas of memory are expected to be accessible while the identity mapping tables are in place" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction ARM: idmap: add identity mapping usage note ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layout ARM: fix alignment of keystone page table fixup ARM: 8112/1: only select ARM_PATCH_PHYS_VIRT if MMU is enabled ARM: 8100/1: Fix preemption disable in iwmmxt_task_enable() ARM: DMA: ensure that old section mappings are flushed from the TLB
2014-08-02f2fs: avoid skipping recover_inline_xattr after recover_inline_dataChao Yu3-3/+4
When we recover data of inode in roll-forward procedure, and the inode has both inline data and inline xattr. We may skip recovering inline xattr if we recover inline data form node page first. This patch will fix the problem that we lost inline xattr data in above scenario. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2014-08-02f2fs: add tracepoint for f2fs_direct_IOChao Yu2-0/+68
This patch adds a tracepoint for f2fs_direct_IO. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2014-08-02ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instructionOmar Sandoval1-0/+4
The kgdb breakpoint hooks (kgdb_brk_fn and kgdb_compiled_brk_fn) should only be entered when a kgdb break instruction is executed from the kernel. Otherwise, if kgdb is enabled, a userspace program can cause the kernel to drop into the debugger by executing either KGDB_BREAKINST or KGDB_COMPILED_BREAK. Acked-by: Will Deacon <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: Russell King <[email protected]>
2014-08-02ARM: idmap: add identity mapping usage noteRussell King1-0/+5
Add a note about the usage of the identity mapping; we do not support accesses outside of the identity map region and kernel image while a CPU is using the identity map. This is because the identity mapping may overwrite vmalloc space, IO mappings, the vectors pages, etc. Acked-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
2014-08-02ARM: add comments to the early page table remap codeRussell King1-5/+46
Add further comments to the early page table remap code to explain what the code is doing, why it is doing it, but more importantly to explain that the code is not architecturally compliant and is squarely in "UNPREDICTABLE" behaviour territory. Add a warning and tainting of the kernel too. Signed-off-by: Russell King <[email protected]>
2014-08-02ARM: 8122/1: smp_scu: enable SCU standby supportShawn Guo1-0/+7
With SCU standby enabled, SCU CLK will be turned off when all processors are in WFI mode. And the clock will be turned on when any processor leaves WFI mode. This behavior should be preferable in terms of power efficiency of system idle. So let's set the SCU standby bit to enable the support in function scu_enable(). Cortex-A9 earlier than r2p0 has no standby bit in SCU, so we need to skip setting the bit for those. Signed-off-by: Shawn Guo <[email protected]> Acked-by: Soren Brinkmann <[email protected]> Signed-off-by: Russell King <[email protected]>
2014-08-02ARM: 8121/1: smp_scu: use macro for SCU enable bitShawn Guo1-2/+3
Use macro instead of magic number for SCU enable bit. Signed-off-by: Shawn Guo <[email protected]> Acked-by: Soren Brinkmann <[email protected]> Signed-off-by: Russell King <[email protected]>
2014-08-02ARM: 8120/1: crypto: sha512: add ARM NEON implementationJussi Kivilinna4-0/+777
This patch adds ARM NEON assembly implementation of SHA-512 and SHA-384 algorithms. tcrypt benchmark results on Cortex-A8, sha512-generic vs sha512-neon-asm: block-size bytes/update old-vs-new 16 16 2.99x 64 16 2.67x 64 64 3.00x 256 16 2.64x 256 64 3.06x 256 256 3.33x 1024 16 2.53x 1024 256 3.39x 1024 1024 3.52x 2048 16 2.50x 2048 256 3.41x 2048 1024 3.54x 2048 2048 3.57x 4096 16 2.49x 4096 256 3.42x 4096 1024 3.56x 4096 4096 3.59x 8192 16 2.48x 8192 256 3.42x 8192 1024 3.56x 8192 4096 3.60x 8192 8192 3.60x Acked-by: Ard Biesheuvel <[email protected]> Tested-by: Ard Biesheuvel <[email protected]> Signed-off-by: Jussi Kivilinna <[email protected]> Signed-off-by: Russell King <[email protected]>
2014-08-02ARM: 8119/1: crypto: sha1: add ARM NEON implementationJussi Kivilinna6-3/+859
This patch adds ARM NEON assembly implementation of SHA-1 algorithm. tcrypt benchmark results on Cortex-A8, sha1-arm-asm vs sha1-neon-asm: block-size bytes/update old-vs-new 16 16 1.04x 64 16 1.02x 64 64 1.05x 256 16 1.03x 256 64 1.04x 256 256 1.30x 1024 16 1.03x 1024 256 1.36x 1024 1024 1.52x 2048 16 1.03x 2048 256 1.39x 2048 1024 1.55x 2048 2048 1.59x 4096 16 1.03x 4096 256 1.40x 4096 1024 1.57x 4096 4096 1.62x 8192 16 1.03x 8192 256 1.40x 8192 1024 1.58x 8192 4096 1.63x 8192 8192 1.63x Acked-by: Ard Biesheuvel <[email protected]> Tested-by: Ard Biesheuvel <[email protected]> Signed-off-by: Jussi Kivilinna <[email protected]> Signed-off-by: Russell King <[email protected]>
2014-08-02ARM: 8118/1: crypto: sha1/make use of common SHA-1 structuresJussi Kivilinna1-28/+22
Common SHA-1 structures are defined in <crypto/sha.h> for code sharing. This patch changes SHA-1/ARM glue code to use these structures. Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Jussi Kivilinna <[email protected]> Signed-off-by: Russell King <[email protected]>
2014-08-01Merge branch 'for-linus' of ↵Linus Torvalds2-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "This contains a couple of fixes - one is the aio fix from Christoph, the other a fallocate() one from Eric" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: fix check for fallocate on active swapfile direct-io: fix AIO regression
2014-08-01Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-21/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Peter Anvin: "A single fix to not invoke the espfix code on Xen PV, as it turns out to oops the guest when invoked after all. This patch leaves some amount of dead code, in particular unnecessary initialization of the espfix stacks when they won't be used, but in the interest of keeping the patch minimal that cleanup can wait for the next cycle" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64/entry/xen: Do not invoke espfix64 on Xen
2014-08-01Merge tag 'staging-3.16-rc8' of ↵Linus Torvalds5-8/+15
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver bugfixes from Greg KH: "Here are some tiny staging driver bugfixes that I've had in my tree for the past week that resolve some reported issues. Nothing major at all, but it would be good to get them merged for 3.16-rc8 or -final" * tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt6655: Fix disassociated messages every 10 seconds staging: vt6655: Fix Warning on boot handle_irq_event_percpu. staging: rtl8723au: rtw_resume(): release semaphore before exit on error iio:bma180: Missing check for frequency fractional part iio:bma180: Fix scale factors to report correct acceleration units iio: buffer: Fix demux table creation
2014-08-01tty/n_gsm.c: fix a memory leak in gsmld_openxinhui.pan1-1/+8
If gsmld_attach_gsm fails, the gsm is not used anymore. tty core will not call gsmld_close to do the cleanup work. tty core just restore to the tty old ldisc. That always causes memory leak. Signed-off-by: xinhui.pan <[email protected]> Reported-by: Peter Hurley <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01pch_uart: don't hardcode PCI slot to get DMA deviceAndy Shevchenko1-3/+4
The DMA is a function 0 of the multifunction device where SPI host is attached. Thus, we may avoid to hardcode PCI slot number. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01tty: n_gsm, use setup_timerJiri Slaby1-3/+1
Just a simple cleanup of init_timer with setting the fields manually. Signed-off-by: Jiri Slaby <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01ARM: imx: Remove references to platform_bus in mxc codePawel Moll1-2/+0
The bus devices created to be parents for other peripherals were using platform_bus as a parent, not being platform devices themselves. Remove the references, making them virtual devices instead. Cc: Sascha Hauer <[email protected]> Cc: Russell King <[email protected]> Signed-off-by: Pawel Moll <[email protected]> Acked-by: Shawn Guo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01USB: devio: fix issue with log floodingOliver Neukum1-1/+1
usbfs allows user space to pass down an URB which sets URB_SHORT_NOT_OK for output URBs. That causes usbcore to log messages without limit for a nonsensical disallowed combination. The fix is to silently drop the attribute in usbfs. The problem is reported to exist since 3.14 https://www.virtualbox.org/ticket/13085 Signed-off-by: Oliver Neukum <[email protected]> CC: [email protected] Acked-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01uas: Log a warning when we cannot use uas because the hcd lacks streamsHans de Goede1-3/+9
So that an user who wants to use uas can see why he is not getting uas. Also move the check down so that we don't warn if there are other reasons why uas cannot work. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01uas: Only complain about missing sg if all other checks succeedHans de Goede1-18/+10
Don't complain about controllers without sg support if there are other reasons why uas cannot be used anyways. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01xhci: Add missing checks for xhci_alloc_command failureHans de Goede2-0/+8
Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01xhci: Rename Asrock P67 pci product-id to EJ168Hans de Goede1-2/+2
The 7023 product id is the generic product id for the Etron EJ168, it is not specific to the version found on the Asrock P67 motherboard. The same id is e.g. also used on Gigabyte motherboards and on no-name pci-e usb-3 addon cards. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01xhci: Blacklist using streams on the Etron EJ168 controllerHans de Goede3-2/+7
Streams on the EJ168 do not work as they should. I've spend 2 days trying to get them to work, but without success. The first problem is that when ever you ring the stream-ring doorbell, the controller starts executing trbs at the beginning of the first ring segment, event if it ended somewhere else previously. This can be worked around by allowing enqueing only one td (not a problem with how streams are typically used) and then resetting our copies of the enqueueing en dequeueing pointers on a td completion to match what the controller seems to be doing. This way things seem to start working with uas and instead of being able to complete only the very first scsi command, the scsi core can probe the disk. But then things break later on when td-s get enqueued with more then one trb. The controller does seem to increase its dequeue pointer while executing a stream-ring (data transfer events I inserted for debugging do trigger). However execution seems to stop at the final normal trb of a multi trb td, even if there is a data transfer event inserted after the final trb. The first problem alone is a serious deviation from the spec, and esp. dealing with cancellation would have been very tricky if not outright impossible, but the second problem simply is a deal breaker altogether, so this patch simply disables streams. Note this will cause the usb-storage + uas driver pair to automatically switch to using usb-storage instead of uas on these devices, essentially reverting to the 3.14 and earlier behavior when uas was marked CONFIG_BROKEN. https://bugzilla.redhat.com/show_bug.cgi?id=1121288 https://bugzilla.kernel.org/show_bug.cgi?id=80101 Cc: [email protected] # 3.15 Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01uas: Limit qdepth to 32 when connected over usb-2Hans de Goede1-1/+1
Some jmicron uas chipsets act up (they disconnect from the bus) when sending more then 32 commands to them at once. Rather then building an ever growing list with usb-id based quirks for devices using this chipset, simply reduce the qdepth to 32 when connected over usb-2. 32 should be plenty to keep things close to maximum possible throughput on usb-2. Cc: [email protected] Tested-and-reported-by: Laszlo T. <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01uwb/whci: use correct structure type name in sizeofJulia Lawall1-1/+1
Correct typo in the name of the type given to sizeof. Because it is the size of a pointer that is wanted, the typo has no impact on compilation or execution. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). The semantic patch used can be found in message 0 of this patch series. Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01usb-core bInterval quirkJames P Michels III3-0/+26
This patch adds a usb quirk to support devices with interupt endpoints and bInterval values expressed as microframes. The quirk causes the parse endpoint function to modify the reported bInterval to a standards conforming value. There is currently code in the endpoint parser that checks for bIntervals that are outside of the valid range (1-16 for USB 2+ high speed and super speed interupt endpoints). In this case, the code assumes the bInterval is being reported in 1ms frames. As well, the correction is only applied if the original bInterval value is out of the 1-16 range. With this quirk applied to the device, the bInterval will be accurately adjusted from microframes to an exponent. Signed-off-by: James P Michels III <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01USB: serial: ftdi_sio: Add support for new Xsens devicesPatrick Riphagen2-0/+5
This adds support for new Xsens devices, using Xsens' own Vendor ID. Signed-off-by: Patrick Riphagen <[email protected]> Signed-off-by: Frans Klaver <[email protected]> Cc: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01USB: serial: ftdi_sio: Annotate the current Xsens PID assignmentsPatrick Riphagen1-5/+5
The converters are used in specific products. It can be useful to know which they are exactly. Signed-off-by: Patrick Riphagen <[email protected]> Signed-off-by: Frans Klaver <[email protected]> Cc: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: comedi: addi_apci_1564: remove diagnostic interrupt support codeChase Southwood2-32/+0
As per Ian, at this point in time it is not worth implementing an async command interface for diagnostic interrupts for this board. As this is the case, this patch removes the code which supports such interrupts as it is now unused. This includes removing apci1564_do_read(), which was the insn_read operation for the digital output subdevice, since all it was doing was reading the current diagnostic interrupt type and returning it in 'data'. This doesn't follow the comedi API and this operation can be emulated by the comedi core anyway since the insn_bits operation follows the comedi API. So it is safe to simply remove this function. Signed-off-by: Chase Southwood <[email protected]> Reviewed-by: Ian Abbott <[email protected]> Cc: H Hartley Sweeten <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: comedi: addi_apci_1564: add subdevice to check diagnostic statusChase Southwood1-1/+22
This board provides VCC/CC diagnostic information, and it also supports diagnostic interrupts. However, as per Ian, these interrupts aren't very useful and it is enough to simply provide an interface for accessing the diagnostic status on-demand. This patch adds a 2-channel digital input subdevice with an insn_bits handler to access this information. Signed-off-by: Chase Southwood <[email protected]> Reviewed-by: Ian Abbott <[email protected]> Cc: H Hartley Sweeten <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: wlan-ng: coding style problem fixModestas Stankus1-1/+0
WARNING: break is not useful after a goto or return 201: FILE: drivers/staging/wlan-ng/p80211conv.c:201: + return 1; + break; Signed-off-by: Modestas Stankus <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: wlan-ng: fixing coding style problemsModestas Stankus1-1/+2
WARNING: Unnecessary space before function pointer arguments + int (*func) (struct mibrec *mib, WARNING: Missing a blank line after declarations + hfa384x_WPAData_t wpa; + if (isget) { Signed-off-by: Modestas Stankus <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: comedi: ii_pci20kc: request and ioremap memoryIan Abbott1-3/+29
The "ii_pci20kc" module is a comedi driver for Intelligent Instruments PCI-20001C carrier board and modules. Despite the name, this is actually an ISA board and uses 1K of ISA memory space (below 1M) for the main board plus up to three modules. The address is set by hardware jumpers. When the board is attached to Comedi via the `COMEDI_DEVCONFIG` ioctl and the driver's legacy "attach" handler, the base address is passed in. The driver currently uses that address as-is, which is a bad idea. It doesn't even reserve the memory region. Fix that by sanity checking the passed in address, reserving the memory region and ioremapping it. Replace the current "detach" handler `comedi_legacy_detach()` with a new handler `ii20k_detach()` which unmaps the memory and releases the region. Signed-off-by: Ian Abbott <[email protected]> Reviewed-by: H Hartley Sweeten <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: lustre: bitwise vs logical typoDan Carpenter1-1/+1
Bitwise AND was intended here obviously. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: dgnc: Remove unneeded dgnc_trace.c and dgnc_trace.hSeunghun Lee7-93/+1
Removes unneeded dgnc_trace.c and dgnc_trace.h CC: Lidza Louina <[email protected]> CC: Mark Hounschell <[email protected]> Signed-off-by: Seunghun Lee <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: dgnc: rephrase commentSeunghun Lee1-4/+4
Rephrase comment to explain original intention of function. CC: Lidza Louina <[email protected]> CC: Mark Hounschell <[email protected]> Suggested-by: Tobias Klauser <[email protected]> Signed-off-by: Seunghun Lee <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: comedi: ni_tio: remove some dead codeDan Carpenter1-12/+0
These conditions can never be true because "i" is always one more than NI_660X_MAX_RTSI_CHAN after the loop. Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: H Hartley Sweeten <[email protected]> Reviewed-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: rtl8723au: Fix static symbol sparse warningMiguel Oliveira1-25/+0
Fix sparse warning: drivers/staging/rtl8723au/core/rtw_efuse.c:579:5: warning: symbol 'efuse_GetCurrentSize23a' was not declared. Should it be static? by removing efuse_GetCurrentSize23a since its never used Signed-off-by: Miguel Oliveira <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: rtl8723au: usb_dvobj_init(): Remove unused variable 'pdev_desc'Jes Sorensen1-3/+0
Signed-off-by: Jes Sorensen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: rtl8723au: Do not duplicate kernel provided USB macrosJes Sorensen1-35/+10
Signed-off-by: Jes Sorensen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: rtl8723au: Remove never set struct pwrctrl_priv.bHWPowerdownJes Sorensen2-14/+8
Signed-off-by: Jes Sorensen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: rtl8723au: Remove two never set variablesJes Sorensen4-37/+0
struct registry_priv.usbss_enable and struct pwrctrl_priv.bHWPwrPindetect are never set. Signed-off-by: Jes Sorensen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: rtl8723au: RSSI_test is never setJes Sorensen2-6/+2
Signed-off-by: Jes Sorensen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging:r8190: coding style: Fixed checkpatch reported ErrorSanjeev Sharma1-90/+79
This is a patch to the r8190_rtl8256.c file that fixes checkpatch reported space & coding style issues. Signed-off-by: Sanjeev Sharma <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging:r8180: coding style: Fixed too long linesSanjeev Sharma1-4/+7
This is a patch to the r8180_93cx6.h file that fixes long lines along with some additional warning. Signed-off-by: Sanjeev Sharma <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging:r8180: coding style: Fixed commenting styleSanjeev Sharma1-6/+9
This is a patch to the r8180_93cx6.c file that fixes commenting style warning Signed-off-by: Sanjeev Sharma <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: lustre: ptlrpc: lproc_ptlrpc.c - fix dereferenceing user space bufferAnil Belur1-1/+2
- this fixes sparse warning for directly deferencing user space buffer drivers/staging/lustre/lustre/ptlrpc/lproc_ptlrpc.c:652:33: warning: incorrect type in argument 2 (different address spaces) drivers/staging/lustre/lustre/ptlrpc/lproc_ptlrpc.c:652:33: expected void const [noderef] <asn:1>*from drivers/staging/lustre/lustre/ptlrpc/lproc_ptlrpc.c:652:33: got char const *buffer Signed-off-by: Anil Belur <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01staging: lustre: ldlm: ldlm_resource.c - fix dereferenceing user space bufferAnil Belur1-2/+3
- this fixes sparse warning for directly deferencing user space buffer ./lustre/ldlm/ldlm_resource.c:202:35: warning: incorrect type in argument 2 (different address spaces) ./lustre/ldlm/ldlm_resource.c:202:35: expected void const [noderef] <asn:1>*from ./lustre/ldlm/ldlm_resource.c:202:35: got char const *buffer Signed-off-by: Anil Belur <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-08-01Staging: android: timed_gpio.c: improved logic of gpio_get_time()Murilo Opsfelder Araujo1-7/+8
This patch improves the logic of gpio_get_time() and, thereafter, makes checkpatch.pl happy. Signed-off-by: Murilo Opsfelder Araujo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.