aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-05-31ARM: dts: add dts file for exynos5800 SoCArun Kumar K1-0/+24
Most of the nodes of exynos5420 remains same for exynos5800. So the exynos5420.dtsi is included in exynos5800 and the changed node properties will be overriden. Signed-off-by: Arun Kumar K <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Acked-by: Olof Johansson <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-31ARM: dts: add dts file for exynos5260-xyref5260 boardRahul Sharma2-0/+104
The patch adds the dts file for xyref5260 board which is based on exynos5260 SoC. Signed-off-by: Rahul Sharma <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-31ARM: dts: add dts files for exynos5260 SoCRahul Sharma2-0/+878
The patch adds the dts files for exynos5260. Signed-off-by: Pankaj Dubey <[email protected]> Signed-off-by: Rahul Sharma <[email protected]> Signed-off-by: Arun Kumar K <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Reviewed-by: Sachin Kamat <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-31ARM: dts: update watchdog node name in exynos5440Sachin Kamat1-1/+1
Made it as per DT node naming convention <name@reg_addr>. Signed-off-by: Sachin Kamat <[email protected]> Reviewed-by: Jingoo Han <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-31ARM: dts: use key code macros on Origen and Arndale boardsSachin Kamat3-17/+20
Key code macros improve readability on exnos4210-origen, exynos4412-origen and exynos5250-arndale boards. Signed-off-by: Sachin Kamat <[email protected]> [[email protected]: squashed similar two patches] Signed-off-by: Kukjin Kim <[email protected]>
2014-05-31ARM: dts: enable RTC and WDT nodes on Origen boardsSachin Kamat2-0/+16
Enabled RTC and WDT nodes on exynos4210-origen and exynos4412-origen boards. Signed-off-by: Sachin Kamat <[email protected]> [[email protected]: squashed similar two patches] Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: enable usb nodes for exynos4412-trats2Chanho Park1-0/+10
This patch enables exynos_usbphy and hsotg device nodes. Cc: Tomasz Figa <[email protected]> Cc: Kamil Debski <[email protected]> Cc: Marek Szyprowski <[email protected]> Signed-off-by: Chanho Park <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: add hsotg device node for exynos4Chanho Park1-0/+11
This patch adds a hsotg node for exynos4 USB2.0 device controller. Cc: Tomasz Figa <[email protected]> Cc: Kamil Debski <[email protected]> Cc: Marek Szyprowski <[email protected]> Signed-off-by: Chanho Park <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: add exynos_usbphy node for exynos4Chanho Park2-0/+15
This patch enables a exynos_usbphy node for exynos4 SoCs. A exynos4x12 usb phy node is almost same with 4210's one except compatible string and pmu syscon. Cc: Tomasz Figa <[email protected]> Cc: Kamil Debski <[email protected]> Signed-off-by: Chanho Park <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: add PMU syscon node for exynos4Chanho Park4-0/+16
This patch adds a PMU(Power Management Unit) syscon node. This should be required for USB Phy syscon regmap I/F. Cc: Kamil Debski <[email protected]> Signed-off-by: Chanho Park <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: add pmu syscon handle to exynos5420 hdmiRahul Sharma1-0/+1
Add PMU syscon handle to HDMI dt node for controlling PHY Enable/Disable bit. Signed-off-by: Rahul Sharma <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: add pmu syscon handle to exynos5250 hdmiRahul Sharma1-0/+1
Add PMU syscon handle to HDMI dt node for controlling PHY Enable/Disable bit. Signed-off-by: Rahul Sharma <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: replace number by macro in clock binding for exynos5420Beomho Seo1-1/+1
sss module device node missed clock macro. This patch replace magic number with macro in clock binding for exynos5420. Signed-off-by: Beomho Seo <[email protected]> Reviewed-by: Sachin Kamat <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: replace number by macro in clock binding for exynos5250Beomho Seo1-2/+2
Phy and sss module device node missed clock macro. This patch replace magic number with macros in clock binding for exynos5250. Signed-off-by: Beomho Seo <[email protected]> Reviewed-by: Sachin Kamat <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: replace number by macro in clock binding for exynos4Beomho Seo1-1/+1
This patch replaces magic number of MIPI DSI Master node with macros in clock binding for exynos4 Signed-off-by: Beomho Seo <[email protected]> Reviewed-by: Sachin Kamat <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: add external sd card node for exynos4210-universal_c210Marek Szyprowski1-0/+10
This patch enables support external SD card slot. Signed-off-by: Marek Szyprowski <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: add multimedia nodes for exynos4210-universal_c210Marek Szyprowski1-0/+23
This patch enables support for multimedia blocks - fimc in mem2mem mode, no camera sensors support yet. Signed-off-by: Marek Szyprowski <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: enable USB functionality for exynos4210-universal_c210Marek Szyprowski1-0/+26
This patch adds device tree nodes necessary to enable USB support on universalc210 board, this includes UDC controller (USB gadget) as well as EHCI and OHCI host ports. LDO3 and LDO8 regulators are switched to always on mode until EHCI and OHCI drivers will support them correctly. Signed-off-by: Marek Szyprowski <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: Enable USB gadget functionality for exynos4210-tratsTomasz Figa1-0/+10
This patch adds device tree nodes necessary to enable USB gadget functionality on Exynos4210-based Trats board. Signed-off-by: Tomasz Figa <[email protected]> Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: Add audio subsystem nodes to exynos4.dtsiSylwester Nawrocki1-0/+38
This patch adds the audio subsystem clock controller and the I2S IP block nodes for Exynos4 SoC series. Signed-off-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: fixed gpio key node for exynos4412-trats2Beomho Seo1-8/+10
This patch fixed gpio key device node. First, fix incorrect gpio property. And then, add ok-key node where locate bottom center. I have tested on exynos4412-trats2 board. Signed-off-by: Beomho Seo <[email protected]> Signed-off-by: MyungJoo Ham <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-23ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2Beomho Seo1-0/+26
Exynos4412-trats2 board have light/proximity sensor. This patch add cm36651 light/ proximity sensor node for exynos4412. cm36651 is required properties as below. - Use i2c-gpio for cm36651 sensor. - Use fixed regulator for the IR LED. It is a part of the cm36651 for proximity detection. - cm36651 is i2c device driver so need to use i2c-gpio driver. Signed-off-by: Beomho Seo <[email protected]> Signed-off-by: MyungJoo Ham <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-22ARM: dts: Add USB 2.0 support on exynos5420Vivek Gautam1-0/+30
Add required device node for ehci and ohci controllers to enable USB 2.0 support. Signed-off-by: Vivek Gautam <[email protected]> Signed-off-by: Vikas Sajjan <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-22ARM: dts: Add usb2phy support on exynos5420Vivek Gautam1-0/+10
Add required device node for usb2phy to let enable USB 2.0 support. Signed-off-by: Vivek Gautam <[email protected]> Signed-off-by: Vikas Sajjan <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-22ARM: dts: Add usb2phy to exynos5250Kamil Debski1-0/+22
Add support to PHY of USB2 of the Exynos5250 SoC. Signed-off-by: Kamil Debski <[email protected]> [[email protected]: Split the usb phy entries] [[email protected]: Added phy entry for OHCI also along with EHCI] Signed-off-by: Vivek Gautam <[email protected]> Signed-off-by: Vikas Sajjan <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-22ARM: dts: Add sysreg sytem controller node to exynos5250 and exynos5420Vivek Gautam3-2/+19
This patch adds sysreg-syscon node to exynos5250 and exynos5420 device tree, to access System Register's registers using syscon driver. Signed-off-by: Kamil Debski <[email protected]> [[email protected]: Split this syreg-syscon dts entry] [[email protected]: added similar syscon entry for exynos5420] Signed-off-by: Vivek Gautam <[email protected]> [[email protected]: updated the binding document] Signed-off-by: Vikas Sajjan <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-22ARM: dts: move dp hpd gpio pin to pinctrl_0 for exynos5420 peach_pitRahul Sharma1-7/+7
DP Hpd Gpio pin which is "gpx2-6" in Exynos 5420 based peach board, belongs to Pinctrl_0. It has moved to pinctrl_0 from pinctrl_3. Signed-off-by: Rahul Sharma <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-20ARM: dts: Add MFC memory banks to exynos5420 boardsSachin Kamat2-0/+10
Add MFC memory banks to Exynos5420 based SMDK and Arndale-octa boards. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: enable dp-controller for exynos5420-peach-pit boardRahul Sharma1-0/+36
Enable dp-controller for peach-pit board. Signed-off-by: Rahul Sharma <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: enable fimd for exynos5420 based peach-pit boardRahul Sharma1-0/+5
Enable fimd for peach-pit board. Signed-off-by: Rahul Sharma <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: enable dp-controller for exynos5250-snow boardRahul Sharma1-0/+29
Enable dp-controller for snow board. Signed-off-by: Rahul Sharma <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: enable fimd for exynos5250-snow boardRahul Sharma1-0/+4
Enable fimd node for snow board. Signed-off-by: Rahul Sharma <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: enable pwm backlight for exynos5250-snowAjay Kumar1-0/+10
Add PWM backlight node for exynos5250 based snow board. Signed-off-by: Olof Johansson <[email protected]> Signed-off-by: Ajay Kumar <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Add pwmX_out pinctrl nodes to exynos5250Ajay Kumar1-0/+28
Adds the PWM nodes to 5250 pinctrl dtsi file. Signed-off-by: Ajay Kumar <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-smdk5420Vivek Gautam1-0/+46
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by: Vivek Gautam <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-peach-pitVivek Gautam1-0/+46
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by: Vivek Gautam <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Add Vbus regulator for USB 3.0 on exynos5250-snowVivek Gautam1-0/+22
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by: Vivek Gautam <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Add PD entry to MFC codec on exynos5420Sachin Kamat1-0/+1
PD entry was missing in MFC codec node. Signed-off-by: Sachin Kamat <[email protected]> Reviewed-by : Arun Kumar K <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Add sound node for exynos5420-peach-pit boardTushar Behera1-0/+31
The audio setup on Peach-pit board is similar to Snow board, hence the sound-card driver used on Snow board can be reused on Peach-pit board. Peach-pit board uses MAX98090 audio codec. Signed-off-by: Tushar Behera <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Add sound node for exynos5250-snow boardTushar Behera1-0/+27
The audio codec on Snow board, MAX98095 is connected on I2C7 bus. Also it requires the GPX1-7 line to be pulled up. Updated Snow DTS file to incorporate above changes and added a sound node to instantiate the I2S-based sound card. Signed-off-by: Tushar Behera <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Update DWC3 usb controller to use new phy driver for exynos5250Vivek Gautam1-15/+2
Removing the dt node for older usb3 phy driver from Exynos5250 device tree and updating the dt node for DWC3 controller to use new phy driver based on generic phy framework. Signed-off-by: Vivek Gautam <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Enable support for generic USB DRD phy for exynos5250Vivek Gautam1-0/+9
Add device tree node for new usbdrd-phy driver, which is based on generic phy framework. Signed-off-by: Vivek Gautam <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Enable support for DWC3 controller for exynos5420Vivek Gautam1-0/+34
Add device tree nodes for DWC3 controller present on Exynos 5420 SoC, to enable support for USB 3.0. Signed-off-by: Vivek Gautam <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: Enable support for USB 3.0 PHY controller for exynos5420Vivek Gautam1-0/+20
Add device tree nodes for USB 3.0 PHY present alongwith USB 3.0 controller Exynos 5420 SoC. This phy driver is based on generic phy framework. Signed-off-by: Vivek Gautam <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: enable hdmi for exynos5420-peach-pit boardRahul Sharma2-0/+27
Enable hdmi for exynos5420 based peach-pit board. Signed-off-by: Rahul Sharma <[email protected]> Acked-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: change to correct compatible string for exynos5420 hdmiRahul Sharma1-1/+1
Replace compatible string for HDMI node in Exynos5420. Since latest restructring in Drm hdmi driver, it is agreed to use a seperate compatible string for Exynos5420 HDMI IP siince it uses APB mapped Phy. Signed-off-by: Rahul Sharma <[email protected]> Acked-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-19ARM: dts: enable hdmi for exynos5250 based snow boardRahul Sharma2-1/+19
Enable support for HDMI for exynos5250 based Snow board. Signed-off-by: Rahul Sharma <[email protected]> Acked-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-16ARM: dts: add tps65090 power regulator for exynos5250-snowDoug Anderson1-0/+90
Added TPS65090 regulator related nodes to Snow board. Signed-off-by: Doug Anderson <[email protected]> Signed-off-by: Sachin Kamat <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-16ARM: dts: add pinctrl for EC irq of exynos5250-snowDoug Anderson1-0/+9
Added pinctrl node for embedded controller (EC) IRQ on Snow board. Signed-off-by: Doug Anderson <[email protected]> Signed-off-by: Sachin Kamat <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2014-05-16ARM: dts: add pinctrl for i2c-arbitrator of exynos5250-snowDoug Anderson1-0/+19
Added i2c-arbitrator pinctrl node to Snow board. Signed-off-by: Doug Anderson <[email protected]> Signed-off-by: Sachin Kamat <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.