| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
To pick the change in:
cc662126b413 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Abdiel Janulgue <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
e933adde6f97 ("fscrypt: include <linux/ioctl.h> in UAPI header")
93edd392cad7 ("fscrypt: support passing a keyring key to FS_IOC_ADD_ENCRYPTION_KEY")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
KVM allows the deferral of exception payloads when a vCPU is in guest
mode to allow the L1 hypervisor to intercept certain events (#PF, #DB)
before register state has been modified. However, this behavior is
incompatible with the KVM_{GET,SET}_VCPU_EVENTS ABI, as userspace
expects register state to have been immediately modified. Userspace may
opt-in for the payload deferral behavior with the
KVM_CAP_EXCEPTION_PAYLOAD per-VM capability. As such,
kvm_multiple_exception() will immediately manipulate guest registers if
the capability hasn't been requested.
Since the deferral is only necessary if a userspace ioctl were to be
serviced at the same as a payload bearing exception is recognized, this
behavior can be relaxed. Instead, opportunistically defer the payload
from kvm_multiple_exception() and deliver the payload before completing
a KVM_GET_VCPU_EVENTS ioctl.
Signed-off-by: Oliver Upton <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
SDM 27.3.4 states that the 'pending debug exceptions' VMCS field will
be populated if a VM-exit caused by an INIT signal takes priority over a
debug-trap. Emulate this behavior when synthesizing an INIT signal
VM-exit into L1.
Fixes: 4b9852f4f389 ("KVM: x86: Fix INIT signal handling in various CPU states")
Signed-off-by: Oliver Upton <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
KVM defines the #DB payload as compatible with the 'pending debug
exceptions' field under VMX, not DR6. Mask off bit 12 when applying the
payload to DR6, as it is reserved on DR6 but not the 'pending debug
exceptions' field.
Fixes: f10c729ff965 ("kvm: vmx: Defer setting of DR6 until #DB delivery")
Signed-off-by: Oliver Upton <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Make sure we hold the rcu lock as we acquire the rcu protected reference
of the object when looking it up from the associated mmap vma.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1083
Fixes: cc662126b413 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Abdiel Janulgue <[email protected]>
Cc: Matthew Auld <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 280d14a69da2e71f43408537c008f2775d5e5360)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Only the first and the last nodes were being added to
ref->preallocated_barriers.
Renaming variables to make it more easy to read.
Fixes: 841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin")
Cc: Chris Wilson <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit d4c3c0b8221a72107eaf35c80c40716b81ca463e)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Similar to commit ac0e331a628b ("drm/i915: Tighten atomicity of
i915_active_acquire vs i915_active_release") we have the same race of
trying to pin the context underneath a mutex while allowing the
decrement to be atomic outside of that mutex. This leads to the problem
where two threads may simultaneously try to pin the context and the
second not notice that they needed to repin the context.
<2> [198.669621] kernel BUG at drivers/gpu/drm/i915/gt/intel_timeline.c:387!
<4> [198.669703] invalid opcode: 0000 [#1] PREEMPT SMP PTI
<4> [198.669712] CPU: 0 PID: 1246 Comm: gem_exec_create Tainted: G U W 5.5.0-rc6-CI-CI_DRM_7755+ #1
<4> [198.669723] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017
<4> [198.669776] RIP: 0010:timeline_advance+0x7b/0xe0 [i915]
<4> [198.669785] Code: 00 48 c7 c2 10 f1 46 a0 48 c7 c7 70 1b 32 a0 e8 bb dd e7 e0 bf 01 00 00 00 e8 d1 af e7 e0 31 f6 bf 09 00 00 00 e8 35 ef d8 e0 <0f> 0b 48 c7 c1 48 fa 49 a0 ba 84 01 00 00 48 c7 c6 10 f1 46 a0 48
<4> [198.669803] RSP: 0018:ffffc900004c3a38 EFLAGS: 00010296
<4> [198.669810] RAX: ffff888270b35140 RBX: ffff88826f32ee00 RCX: 0000000000000006
<4> [198.669818] RDX: 00000000000017c5 RSI: 0000000000000000 RDI: 0000000000000009
<4> [198.669826] RBP: ffffc900004c3a64 R08: 0000000000000000 R09: 0000000000000000
<4> [198.669834] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88826f9b5980
<4> [198.669841] R13: 0000000000000cc0 R14: ffffc900004c3dc0 R15: ffff888253610068
<4> [198.669849] FS: 00007f63e663fe40(0000) GS:ffff888276c00000(0000) knlGS:0000000000000000
<4> [198.669857] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [198.669864] CR2: 00007f171f8e39a8 CR3: 000000026b1f6005 CR4: 00000000003606f0
<4> [198.669872] Call Trace:
<4> [198.669924] intel_timeline_get_seqno+0x12/0x40 [i915]
<4> [198.669977] __i915_request_create+0x76/0x5a0 [i915]
<4> [198.670024] i915_request_create+0x86/0x1c0 [i915]
<4> [198.670068] i915_gem_do_execbuffer+0xbf2/0x2500 [i915]
<4> [198.670082] ? __lock_acquire+0x460/0x15d0
<4> [198.670128] i915_gem_execbuffer2_ioctl+0x11f/0x470 [i915]
<4> [198.670171] ? i915_gem_execbuffer_ioctl+0x300/0x300 [i915]
<4> [198.670181] drm_ioctl_kernel+0xa7/0xf0
<4> [198.670188] drm_ioctl+0x2e1/0x390
<4> [198.670233] ? i915_gem_execbuffer_ioctl+0x300/0x300 [i915]
Fixes: 841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin")
References: ac0e331a628b ("drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit e5429340bfa2dc43a07c3329e0c30cdae4cc0b35)
Signed-off-by: Jani Nikula <[email protected]>
|
|
As we use a mutex to serialise the first acquire (as it may be a lengthy
operation), but only an atomic decrement for the release, we have to
be careful in case a second thread races and completes both
acquire/release as the first finishes its acquire.
Thread A Thread B
i915_active_acquire i915_active_acquire
atomic_read() == 0 atomic_read() == 0
mutex_lock() mutex_lock()
atomic_read() == 0
ref->active();
atomic_inc()
mutex_unlock()
atomic_read() == 1
i915_active_release
atomic_dec_and_test() -> 0
ref->retire()
atomic_inc() -> 1
mutex_unlock()
So thread A has acquired the ref->active_count but since the ref was
still active at the time, it did not initialise it. By switching the
check inside the mutex to an atomic increment only if already active, we
close the race.
Fixes: c9ad602feabe ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree")
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ac0e331a628b5ded087eab09fad2ffb082ac61ba)
Signed-off-by: Jani Nikula <[email protected]>
|
|
i915_gpu_coreddump_put is currently only defined if
CONFIG_DRM_I915_CAPTURE_ERROR is enabled, provide a stub otherwise.
Reported-by: Mike Lothian <[email protected]>
Fixes: 742379c0c400 ("drm/i915: Start chopping up the GPU error capture")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mike Lothian <[email protected]>
Cc: Andi Shyti <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 7e36505d0cf82f2920f2fd22ebb14a8b540396a3)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Accessing a per-cpu variable only makes sense when preemption is
disabled (and the kernel does check this when the right debug options
are switched on).
For kvm_get_running_vcpu(), it is fine to return the value after
re-enabling preemption, as the preempt notifiers will make sure that
this is kept consistent across task migration (the comment above the
function hints at it, but lacks the crucial preemption management).
While we're at it, move the comment from the ARM code, which explains
why the whole thing works.
Fixes: 7495e22bb165 ("KVM: Move running VCPU from ARM to common code").
Cc: Paolo Bonzini <[email protected]>
Reported-by: Zenghui Yu <[email protected]>
Tested-by: Zenghui Yu <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Message-id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Do not initialize the microcode version at RESET or INIT, only on vCPU
creation. Microcode updates are not lost during INIT, and exact
behavior across a warm RESET is not specified by the architecture.
Since we do not support a microcode update directly from the hypervisor,
but only as a result of userspace setting the microcode version MSR,
it's simpler for userspace if we do nothing in KVM and let userspace
emulate behavior for RESET as it sees fit.
Userspace can tie the fix to the availability of MSR_IA32_UCODE_REV in
the list of emulated MSRs.
Reported-by: Alex Williamson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
MSI-GL73 laptop with ALC1220 codec requires a similar workaround for
Clevo laptops to enforce the DAC/mixer connection path. Set up a
quirk entry for that.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204159
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Add supported Headset Button for ALC215/ALC285/ALC289.
Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Sameeh Jubran says:
====================
Bug fixes for ENA Ethernet driver
Difference from V1:
* Started using netdev_rss_key_fill()
* Dropped superflous changes that are not related to bug fixes as
requested by Jakub
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
comp_ctx can be NULL in a very rare case when an admin command is executed
during the execution of ena_remove().
The bug scenario is as follows:
* ena_destroy_device() sets the comp_ctx to be NULL
* An admin command is executed before executing unregister_netdev(),
this can still happen because our device can still receive callbacks
from the netdev infrastructure such as ethtool commands.
* When attempting to access the comp_ctx, the bug occurs since it's set
to NULL
Fix:
Added a check that comp_ctx is not NULL
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Up till kernel 4.11 there was no enum defined for crc32 hash in ethtool,
thus the xor enum was used for supporting crc32.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As the name suggests ETH_RSS_HASH_NO_CHANGE is received upon changing
the key or indirection table using ethtool while keeping the same hash
function.
Also add a function for retrieving the current hash function from
the ena-com layer.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: Saeed Bshara <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The function ena_com_ind_tbl_convert_from_device() has an overflow
bug as explained below. Either way, this function is not needed at
all since we don't retrieve the indirection table from the device
at any point which means that this conversion is not needed.
The bug:
The for loop iterates over all io_sq_queues, when passing the actual
number of used queues the io_sq_queues[i].idx equals 0 since they are
uninitialized which results in the following code to be executed till
the end of the loop:
dev_idx_to_host_tbl[0] = i;
This results dev_idx_to_host_tbl[0] in being equal to
ENA_TOTAL_NUM_QUEUES - 1.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
table
The indirection table has the indices of the Rx queues. When we store it
during set indirection operation, we convert the indices to our internal
representation of the indices.
Our internal representation of the indices is: even indices for Tx and
uneven indices for Rx, where every Tx/Rx pair are in a consecutive order
starting from 0. For example if the driver has 3 queues (3 for Tx and 3
for Rx) then the indices are as follows:
0 1 2 3 4 5
Tx Rx Tx Rx Tx Rx
The BUG:
The issue is that when we satisfy a get request for the indirection
table, we don't convert the indices back to the original representation.
The FIX:
Simply apply the inverse function for the indices of the indirection
table after we set it.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The device receives, stores and retrieves the hash function value as bits
and not as their enum value.
The bug:
* In ena_com_set_hash_function() we set
cmd.u.flow_hash_func.selected_func to the bit value of rss->hash_func.
(1 << rss->hash_func)
* In ena_com_get_hash_function() we retrieve the hash function and store
it's bit value in rss->hash_func. (Now the bit value of rss->hash_func
is stored in rss->hash_func instead of it's enum value)
The fix:
This commit fixes the issue by converting the retrieved hash function
values from the device to the matching enum value of the set bit using
ffs(). ffs() finds the first set bit's index in a word. Since the function
returns 1 for the LSB's index, we need to subtract 1 from the returned
value (note that BIT(0) is 1).
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On old hardware, getting / setting the hash function is not supported while
gettting / setting the indirection table is.
This commit enables us to still show the indirection table on older
hardwares by setting the hash function and key to NULL.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently we allocate the key whether the device supports setting the
key or not. This commit adds a check to the allocation function and
handles the error accordingly.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Bug description:
When running "ethtool -x <if_name>" the key shows up as all zeros.
When we use "ethtool -X <if_name> hfunc toeplitz hkey <some:random:key>" to
set the key and then try to retrieve it using "ethtool -x <if_name>" then
we return the correct key because we return the one we saved.
Bug cause:
We don't fetch the key from the device but instead return the key
that we have saved internally which is by default set to zero upon
allocation.
Fix:
This commit fixes the issue by initializing the key to a random value
using netdev_rss_key_fill().
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Current implementation of the driver calls skb_tx_timestamp()to add a
software tx timestamp to the skb, however the software-transmit capability
is not reported in ethtool -T.
This commit updates the ethtool structure to report the software-transmit
capability in ethtool -T using the standard ethtool_op_get_ts_info().
This function reports all software timestamping capabilities (tx and rx),
as well as setting phc_index = -1. phc_index is the index of the PTP
hardware clock device that will be used for hardware timestamps. Since we
don't have such a device in ENA, using the default -1 value is the correct
setting.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Ezequiel Lara Gomez <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
>From the documentation of round_jiffies():
"Rounds a time delta in the future (in jiffies) up or down to
(approximately) full seconds. This is useful for timers for which
the exact time they fire does not matter too much, as long as
they fire approximately every X seconds.
By rounding these timers to whole seconds, all such timers will fire
at the same time, rather than at various times spread out. The goal
of this is to have the CPU wake up less, which saves power."
There are 2 parts to this patch:
================================
Part 1:
-------
In our case we need timer_service to be called approximately every
X=1 seconds, and the exact time does not matter, so using round_jiffies()
is the right way to go.
Therefore we add round_jiffies() to the mod_timer() in ena_timer_service().
Part 2:
-------
round_jiffies() is used in check_for_missing_keep_alive() when
getting the jiffies of the expiration of the keep_alive timeout. Here it
is actually a mistake to use round_jiffies() because we want the exact
time when keep_alive should expire and not an approximate rounded time,
which can cause early, false positive, timeouts.
Therefore we remove round_jiffies() in the calculation of
keep_alive_expired() in check_for_missing_keep_alive().
Fixes: 82ef30f13be0 ("net: ena: add hardware hints capability to the driver")
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When ethtool -X is called without an hkey, ena_com_fill_hash_function()
is called with key=NULL, which is passed to memcpy causing a crash.
This commit fixes this issue by checking key is not NULL.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <[email protected]>
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As nlmsg_put() does not clear the memory that is reserved,
it this the caller responsability to make sure all of this
memory will be written, in order to not reveal prior content.
While we are at it, we can provide the socket cookie even
if clsock is not set.
syzbot reported :
BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline]
BUG: KMSAN: uninit-value in __swab32p include/uapi/linux/swab.h:179 [inline]
BUG: KMSAN: uninit-value in __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
BUG: KMSAN: uninit-value in get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
BUG: KMSAN: uninit-value in bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252
CPU: 1 PID: 5262 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
__arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
__fswab32 include/uapi/linux/swab.h:59 [inline]
__swab32p include/uapi/linux/swab.h:179 [inline]
__be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
kmsan_kmalloc_large+0x73/0xc0 mm/kmsan/kmsan_hooks.c:128
kmalloc_large_node_hook mm/slub.c:1406 [inline]
kmalloc_large_node+0x282/0x2c0 mm/slub.c:3841
__kmalloc_node_track_caller+0x44b/0x1200 mm/slub.c:4368
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_dump+0x44b/0x1ab0 net/netlink/af_netlink.c:2224
__netlink_dump_start+0xbb2/0xcf0 net/netlink/af_netlink.c:2352
netlink_dump_start include/linux/netlink.h:233 [inline]
smc_diag_handler_dump+0x2ba/0x300 net/smc/smc_diag.c:242
sock_diag_rcv_msg+0x211/0x610 net/core/sock_diag.c:256
netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
kernel_sendmsg+0x433/0x440 net/socket.c:679
sock_no_sendpage+0x235/0x300 net/core/sock.c:2740
kernel_sendpage net/socket.c:3776 [inline]
sock_sendpage+0x1e1/0x2c0 net/socket.c:937
pipe_to_sendpage+0x38c/0x4c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x539/0xed0 fs/splice.c:636
splice_from_pipe fs/splice.c:671 [inline]
generic_splice_sendpage+0x1d5/0x2d0 fs/splice.c:844
do_splice_from fs/splice.c:863 [inline]
do_splice fs/splice.c:1170 [inline]
__do_sys_splice fs/splice.c:1447 [inline]
__se_sys_splice+0x2380/0x3350 fs/splice.c:1427
__x64_sys_splice+0x6e/0x90 fs/splice.c:1427
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Ursula Braun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap
validation") introduced a necessary change for verifying how queue
bitmaps from the iavf driver get validated. Unfortunately, the
conditional was reversed. Fix this.
Fixes: d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap validation")
Signed-off-by: Brett Creeley <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The current generic XDP handler skips execution of XDP programs entirely if
an SKB is marked as cloned. This leads to some surprising behaviour, as
packets can end up being cloned in various ways, which will make an XDP
program not see all the traffic on an interface.
This was discovered by a simple test case where an XDP program that always
returns XDP_DROP is installed on a veth device. When combining this with
the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending
side, SKBs reliably end up in the cloned state, causing them to be passed
through to the receiving interface instead of being dropped. A minimal
reproducer script for this is included below.
This patch fixed the issue by simply triggering the existing linearisation
code for cloned SKBs instead of skipping the XDP program execution. This
behaviour is in line with the behaviour of the native XDP implementation
for the veth driver, which will reallocate and copy the SKB data if the SKB
is marked as shared.
Reproducer Python script (requires BCC and Scapy):
from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP
from bcc import BPF
import time, sys, subprocess, shlex
SKB_MODE = (1 << 1)
DRV_MODE = (1 << 2)
PYTHON=sys.executable
def client():
time.sleep(2)
# Sniffing on the sender causes skb_cloned() to be set
s = AsyncSniffer()
s.start()
for p in range(10):
sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"),
verbose=False)
time.sleep(0.1)
s.stop()
return 0
def server(mode):
prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}")
func = prog.load_func("dummy_drop", BPF.XDP)
prog.attach_xdp("a_to_b", func, mode)
time.sleep(1)
s = sniff(iface="a_to_b", count=10, timeout=15)
if len(s):
print(f"Got {len(s)} packets - should have gotten 0")
return 1
else:
print("Got no packets - as expected")
return 0
if len(sys.argv) < 2:
print(f"Usage: {sys.argv[0]} <skb|drv>")
sys.exit(1)
if sys.argv[1] == "client":
sys.exit(client())
elif sys.argv[1] == "server":
mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE
sys.exit(server(mode))
else:
try:
mode = sys.argv[1]
if mode not in ('skb', 'drv'):
print(f"Usage: {sys.argv[0]} <skb|drv>")
sys.exit(1)
print(f"Running in {mode} mode")
for cmd in [
'ip netns add netns_a',
'ip netns add netns_b',
'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b',
# Disable ipv6 to make sure there's no address autoconf traffic
'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1',
'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1',
'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa',
'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc',
'ip -n netns_a link set dev a_to_b up',
'ip -n netns_b link set dev b_to_a up']:
subprocess.check_call(shlex.split(cmd))
server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}"))
client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client"))
client.wait()
server.wait()
sys.exit(server.returncode)
finally:
subprocess.run(shlex.split("ip netns delete netns_a"))
subprocess.run(shlex.split("ip netns delete netns_b"))
Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Reported-by: Stepan Horacek <[email protected]>
Suggested-by: Paolo Abeni <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A fix for an xfstest failure and some and an update that removes an
fsdax dependency on block devices.
Summary:
- Fix RWF_NOWAIT writes to properly return -EAGAIN
- Clean up an unused helper
- Update dax_writeback_mapping_range to not need a block_device
argument"
* tag 'dax-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: pass NOWAIT flag to iomap_apply
dax: Get rid of fs_dax_get_by_host() helper
dax: Pass dax_dev instead of bdev to dax_writeback_mapping_range()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes:
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically. To ease complaints about
taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event (soft
disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)"
* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Consolidate trace() functions
tracing: Don't return -EINVAL when tracing soft disabled synth events
tracing: Add missing nest end to synth_event_trace_start() error case
tools/bootconfig: Suppress non-error messages
bootconfig: Allocate xbc_nodes array dynamically
bootconfig: Use parse_args() to find bootconfig and '--'
tracing/kprobe: Fix uninitialized variable bug
bootconfig: Remove unneeded CONFIG_LIBXBC
tools/bootconfig: Fix wrong __VA_ARGS__ usage
|
|
If only Tegra194 support is enabled, the tegra30_fuse_read() and
tegra30_fuse_init() function are not declared and cause a build failure.
Add Tegra194 to the preprocessor guard to make sure these functions are
available for Tegra194-only builds as well.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains ARM64 defconfig changes for v5.6, please pull
the following:
- Nicolas enables the BCM2835 DMA engine controller as built-in since
the bcm2835 SD host controller depends on the DMA engine to be
available.
* tag 'arm-soc/for-5.6/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Set bcm2835-dma as built-in
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
One patch to enable the new thermal sensor driver found on newer
Allwinner SoCs.
* tag 'sunxi-config-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: sunxi: Enable CONFIG_SUN8I_THERMAL
Link: https://lore.kernel.org/r/9d9805ea-cfe3-4eed-b977-1933a670ba7b.lettre@localhost
Signed-off-by: Olof Johansson <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Two patches to enable the new thermal sensor driver found on newer
Allwinner SoCs and to enable the MIPI-DSI controller.
* tag 'sunxi-config64-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable DRM_SUN6I_DSI
arm64: defconfig: Enable CONFIG_SUN8I_THERMAL
Link: https://lore.kernel.org/r/283eb531-890f-4ab2-95b5-898301af9807.lettre@localhost
Signed-off-by: Olof Johansson <[email protected]>
|
|
Linux 5.6-rc1
Merging in to avoid fixes pull request diffstats being noisy due to
being based on -rc1.
Signed-off-by: Olof Johansson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
ARMv8 Juno/Fast Models fix for v5.6
A single fix for PCI interrupt-mapping on FVP Rev C model. This is
present since the platform was added. This fix is needed to get VFIO
working correctly on this model.
* tag 'juno-fix-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fast models: Fix FVP PCI interrupt-map property
Link: https://lore.kernel.org/r/20200205183423.GF38466@bogus
Signed-off-by: Olof Johansson <[email protected]>
|
|
If the platform triggers a spurious SCI even though the status bit
is not set for any GPE when the system is suspended to idle, it will
be treated as a genuine wakeup, so avoid that by checking if any GPEs
are active at all before returning 'true' from acpi_s2idle_wake().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206413
Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow")
Reported-by: Tsuchiya Yuto <[email protected]>
Cc: 5.4+ <[email protected]> # 5.4+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Introduce a new helper function, acpi_any_gpe_status_set(), for
checking the status bits of all enabled GPEs in one go.
It is needed to distinguish spurious SCIs from genuine ones when
deciding whether or not to wake up the system from suspend-to-idle.
Cc: 5.4+ <[email protected]> # 5.4+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Rather than the FEATURE_ID flags. Avoids a possible reading past
the end of the array.
Reviewed-by: Evan Quan <[email protected]>
Reported-by: Aleksandr Mezin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 5.5.x
|
|
Update to the latest changes.
Reviewed-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 5.5.x
|
|
Former comment looks to be one intended behavior in code,
actually it's not. So correct it.
Suggested-by: Christian König <[email protected]>
Signed-off-by: Guchun Chen <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY]
Programming DPPCLK to the same value currently set may cause
underflow while playing video in certain conditions.
[HOW]
Only program DPPCLK if clock is not the same as the
previous value programmed.
Signed-off-by: Sung Lee <[email protected]>
Reviewed-by: Yongqiang Sun <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
In DCN hardware sequencer we do actually call ATOM_INIT correctly per
pipe. The workaround is not necessary for command table offloading.
[How]
Drop the workaround since it's not needed.
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Reviewed-by: Chris Park <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix warning during switching to dpg pause mode for
VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16
Signed-off-by: James Zhu <[email protected]>
Acked-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
GDS clear workaround will cause gfx failure in suspend/resume case.
[ 98.679559] [drm:amdgpu_device_ip_late_init [amdgpu]] *ERROR* late_init of IP block <gfx_v9_0> failed -110
[ 98.679561] PM: dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -110
[ 98.679562] PM: Device 0000:03:00.0 failed to resume async: error -110
As this workaround is specific to the HW bug of GDS's ECC error
existing in cold boot up, so bypass this workaround in suspend/
resume case after booting up.
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
hwc->conf was designated specifically for AMD APU IOMMU purposes. This
could cause problems in performance and/or function since APU IOMMU
implementation is elsewhere. Also hwc->conf and hwc->config are
different members of an anonymous union so hwc->conf aliases as
hw->last_tag.
Signed-off-by: Jonathan Kim <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
On PowerPC, the compiler will tag object files with whether they
use hard or soft float FP ABI and whether they use 64 or 128-bit
long double ABI. On systems with 64-bit long double ABI, a tag
will get emitted whenever a double is used, as on those systems
a long double is the same as a double. This will prevent linkage
as other files are being compiled with hard-float.
On ppc64, this code will never actually get used for the time
being, as the only currently existing hardware using it are the
Renoir APUs. Therefore, until this is testable and can be fixed
properly, at least make sure the build will not fail.
Signed-off-by: Daniel Kolesa <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Support pause_state for multiple instance, and it will fix vcn2.5 DPG mode
power off issue on instance 1.
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|