aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-05-17sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_levelVitalii Bursov2-2/+2
Change relax_domain_level checks so that it would be possible to include or exclude all domains from newidle balancing. This matches the behavior described in the documentation: -1 no request. use system default or follow request of others. 0 no search. 1 search siblings (hyperthreads in a core). "2" enables levels 0 and 1, level_max excludes the last (level_max) level, and level_max+1 includes all levels. Fixes: 1d3504fcf560 ("sched, cpuset: customize sched domains, core") Signed-off-by: Vitalii Bursov <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Tested-by: Dietmar Eggemann <[email protected]> Reviewed-by: Vincent Guittot <[email protected]> Reviewed-by: Valentin Schneider <[email protected]> Link: https://lore.kernel.org/r/bd6de28e80073c79466ec6401cdeae78f0d4423d.1714488502.git.vitaly@bursov.com
2024-05-17x86/alternatives: Use the correct length when optimizing NOPsBorislav Petkov (AMD)1-1/+1
Commit in Fixes moved the optimize_nops() call inside apply_relocation() and made it a second optimization pass after the relocations have been done. Since optimize_nops() works only on NOPs, that is fine and it'll simply jump over instructions which are not NOPs. However, it made that call with repl_len as the buffer length to optimize. However, it can happen that there are alternatives calls like this one: alternative("mfence; lfence", "", ALT_NOT(X86_FEATURE_APIC_MSRS_FENCE)); where the replacement length is 0. And using repl_len is wrong because apply_alternatives() expands the buffer size to the length of the source insn that is being patched, by padding it with one-byte NOPs: for (; insn_buff_sz < a->instrlen; insn_buff_sz++) insn_buff[insn_buff_sz] = 0x90; Long story short: pass the length of the original instruction(s) as the length of the temporary buffer which to optimize. Result: SMP alternatives: feat: 11*32+27, old: (lapic_next_deadline+0x9/0x50 (ffffffff81061829) len: 6), repl: (ffffffff89b1cc60, len: 0) flags: 0x1 SMP alternatives: ffffffff81061829: old_insn: 0f ae f0 0f ae e8 SMP alternatives: ffffffff81061829: final_insn: 90 90 90 90 90 90 => SMP alternatives: feat: 11*32+27, old: (lapic_next_deadline+0x9/0x50 (ffffffff81061839) len: 6), repl: (ffffffff89b1cc60, len: 0) flags: 0x1 SMP alternatives: ffffffff81061839: [0:6) optimized NOPs: 66 0f 1f 44 00 00 SMP alternatives: ffffffff81061839: old_insn: 0f ae f0 0f ae e8 SMP alternatives: ffffffff81061839: final_insn: 66 0f 1f 44 00 00 Fixes: da8f9cf7e721 ("x86/alternatives: Get rid of __optimize_nops()") Signed-off-by: Borislav Petkov (AMD) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-05-17x86/boot: Address clang -Wimplicit-fallthrough in vsprintf()Nathan Chancellor1-0/+2
After enabling -Wimplicit-fallthrough for the x86 boot code, clang warns: arch/x86/boot/printf.c:257:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] 257 | case 'u': | ^ Clang is a little more pedantic than GCC, which does not warn when falling through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to silence the warning. Fixes: dd0716c2b877 ("x86/boot: Add a fallthrough annotation") Reported-by: kernel test robot <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Justin Stitt <[email protected]> Link: https://lore.kernel.org/r/20240516-x86-boot-fix-clang-implicit-fallthrough-v1-1-04dc320ca07c@kernel.org Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
2024-05-16af_packet: do not call packet_read_pending() from tpacket_destruct_skb()Eric Dumazet1-2/+1
trafgen performance considerably sank on hosts with many cores after the blamed commit. packet_read_pending() is very expensive, and calling it in af_packet fast path defeats Daniel intent in commit b013840810c2 ("packet: use percpu mmap tx frame pending refcount") tpacket_destruct_skb() makes room for one packet, we can immediately wakeup a producer, no need to completely drain the tx ring. Fixes: 89ed5b519004 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET") Signed-off-by: Eric Dumazet <[email protected]> Cc: Neil Horman <[email protected]> Cc: Daniel Borkmann <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-16virtio_net: Fix missed rtnl_unlockDaniel Jurgens1-3/+3
The rtnl_lock would stay locked if allocating promisc_allmulti failed. Also changed the allocation to GFP_KERNEL. Fixes: ff7c7d9f5261 ("virtio_net: Remove command data from control_buf") Reported-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/netdev/CANn89iLazVaUCvhPm6RPJJ0owra_oFnx7Fhc8d60gV-65ad3WQ@mail.gmail.com/ Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: Brett Creeley <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-16netrom: fix possible dead-lock in nr_rt_ioctl()Eric Dumazet1-12/+7
syzbot loves netrom, and found a possible deadlock in nr_rt_ioctl [1] Make sure we always acquire nr_node_list_lock before nr_node_lock(nr_node) [1] WARNING: possible circular locking dependency detected 6.9.0-rc7-syzkaller-02147-g654de42f3fc6 #0 Not tainted ------------------------------------------------------ syz-executor350/5129 is trying to acquire lock: ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_node_lock include/net/netrom.h:152 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:464 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 but task is already holding lock: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (nr_node_list_lock){+...}-{2:2}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_remove_node net/netrom/nr_route.c:299 [inline] nr_del_node+0x4b4/0x820 net/netrom/nr_route.c:355 nr_rt_ioctl+0xa95/0x1090 net/netrom/nr_route.c:683 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&nr_node->node_lock){+...}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_node_lock include/net/netrom.h:152 [inline] nr_dec_obs net/netrom/nr_route.c:464 [inline] nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(nr_node_list_lock); lock(&nr_node->node_lock); lock(nr_node_list_lock); lock(&nr_node->node_lock); *** DEADLOCK *** 1 lock held by syz-executor350/5129: #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697 stack backtrace: CPU: 0 PID: 5129 Comm: syz-executor350 Not tainted 6.9.0-rc7-syzkaller-02147-g654de42f3fc6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_node_lock include/net/netrom.h:152 [inline] nr_dec_obs net/netrom/nr_route.c:464 [inline] nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-16idpf: don't skip over ethtool tcp-data-split settingMichal Schmidt1-1/+2
Disabling tcp-data-split on idpf silently fails: # ethtool -G $NETDEV tcp-data-split off # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: on But it works if you also change 'tx' or 'rx': # ethtool -G $NETDEV tcp-data-split off tx 256 # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: off The bug is in idpf_set_ringparam, where it takes a shortcut out if the TX and RX sizes are not changing. Fix it by checking also if the tcp-data-split setting remains unchanged. Only then can the soft reset be skipped. Fixes: 9b1aa3ef2328 ("idpf: add get/set for Ethtool's header split ringparam") Reported-by: Xu Du <[email protected]> Closes: https://issues.redhat.com/browse/RHEL-36182 Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-16dt-bindings: net: qcom: ethernet: Allow dma-coherentSagar Cheluvegowda1-0/+2
On SA8775P, Ethernet DMA controller is coherent with the CPU. allow specifying that. Signed-off-by: Sagar Cheluvegowda <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20240514-mark_ethernet_devices_dma_coherent-v4-2-04e1198858c5@quicinc.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-16bonding: fix oops during rmmodTony Battersby1-6/+7
"rmmod bonding" causes an oops ever since commit cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function"). Here are the relevant functions being called: bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); bonding_debug_root = NULL; <--------- SET TO NULL HERE bond_netlink_fini() rtnl_link_unregister() __rtnl_link_unregister() unregister_netdevice_many_notify() bond_uninit() bond_debug_unregister() (commit removed check for bonding_debug_root == NULL) debugfs_remove() simple_recursive_removal() down_write() -> OOPS However, reverting the bad commit does not solve the problem completely because the original code contains a race that could cause the same oops, although it was much less likely to be triggered unintentionally: CPU1 rmmod bonding bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); CPU2 echo -bond0 > /sys/class/net/bonding_masters bond_uninit() bond_debug_unregister() if (!bonding_debug_root) CPU1 bonding_debug_root = NULL; So do NOT revert the bad commit (since the removed checks were racy anyway), and instead change the order of actions taken during module removal. The same oops can also happen if there is an error during module init, so apply the same fix there. Fixes: cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function") Cc: [email protected] Signed-off-by: Tony Battersby <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-16net/ipv6: Fix route deleting failure when metric equals 0xu xin1-1/+4
Problem ========= After commit 67f695134703 ("ipv6: Move setting default metric for routes"), we noticed that the logic of assigning the default value of fc_metirc changed in the ioctl process. That is, when users use ioctl(fd, SIOCADDRT, rt) with a non-zero metric to add a route, then they may fail to delete a route with passing in a metric value of 0 to the kernel by ioctl(fd, SIOCDELRT, rt). But iproute can succeed in deleting it. As a reference, when using iproute tools by netlink to delete routes with a metric parameter equals 0, like the command as follows: ip -6 route del fe80::/64 via fe81::5054:ff:fe11:3451 dev eth0 metric 0 the user can still succeed in deleting the route entry with the smallest metric. Root Reason =========== After commit 67f695134703 ("ipv6: Move setting default metric for routes"), When ioctl() pass in SIOCDELRT with a zero metric, rtmsg_to_fib6_config() will set a defalut value (1024) to cfg->fc_metric in kernel, and in ip6_route_del() and the line 4074 at net/ipv3/route.c, it will check by if (cfg->fc_metric && cfg->fc_metric != rt->fib6_metric) continue; and the condition is true and skip the later procedure (deleting route) because cfg->fc_metric != rt->fib6_metric. But before that commit, cfg->fc_metric is still zero there, so the condition is false and it will do the following procedure (deleting). Solution ======== In order to keep a consistent behaviour across netlink() and ioctl(), we should allow to delete a route with a metric value of 0. So we only do the default setting of fc_metric in route adding. CC: [email protected] # 5.4+ Fixes: 67f695134703 ("ipv6: Move setting default metric for routes") Co-developed-by: Fan Yu <[email protected]> Signed-off-by: Fan Yu <[email protected]> Signed-off-by: xu xin <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-16selftests/net: reduce xfrm_policy test timeHangbin Liu1-2/+2
The check_random_order test add/get plenty of xfrm rules, which consume a lot time on debug kernel and always TIMEOUT. Let's reduce the test loop and see if it works. Signed-off-by: Hangbin Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-16Merge branches 'clk-microchip', 'clk-samsung' and 'clk-qcom' into clk-nextStephen Boyd35-607/+2346
* clk-microchip: clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clock, reset: microchip: move all mpfs reset code to the reset subsystem * clk-samsung: clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk: samsung: gs101: drop unused HSI2 clock parent data clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit clk: samsung: gs101: propagate PERIC1 USI SPI clock rate clk: samsung: gs101: propagate PERIC0 USI SPI clock rate clk: samsung: exynosautov9: fix wrong pll clock id value dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema clk: samsung: exynos850: Add CMU_CPUCL0 and CMU_CPUCL1 clk: samsung: Implement manual PLL control for ARM64 SoCs * clk-qcom: (27 commits) clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies clk: qcom: mmcc-msm8998: fix venus clock issue clk: qcom: dispcc-sm8650: fix DisplayPort clocks clk: qcom: dispcc-sm8550: fix DisplayPort clocks clk: qcom: dispcc-sm6350: fix DisplayPort clocks clk: qcom: dispcc-sm8450: fix DisplayPort clocks clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pll clk: qcom: apss-ipq-pll: constify clk_init_data structures clk: qcom: apss-ipq-pll: constify match data structures clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs' clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs' clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf clk: qcom: clk-rcg2: add support for rcg2 freq multi ops clk: qcom: clk-rcg: introduce support for multiple conf for same freq clk: qcom: hfpll: Add QCS404-specific compatible dt-bindings: clock: qcom,hfpll: Convert to YAML ...
2024-05-16Merge branches 'clk-counted', 'clk-imx', 'clk-amlogic', 'clk-binding' and ↵Stephen Boyd41-63/+1037
'clk-rockchip' into clk-next * clk-counted: clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws * clk-imx: clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: imx: add i.MX95 BLK CTL clk driver dt-bindings: clock: support i.MX95 Display Master CSR module dt-bindings: clock: support i.MX95 BLK CTL module dt-bindings: clock: add i.MX95 clock header clk: imx: imx8mp: Add pm_runtime support for power saving * clk-amlogic: clk: meson: s4: fix module autoloading clk: meson: fix module license to GPL only clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF clk: meson: add vclk driver clk: meson: pll: print out pll name when unable to lock it clk: meson: s4: pll: determine maximum register in regmap config clk: meson: s4: peripherals: determine maximum register in regmap config clk: meson: a1: pll: determine maximum register in regmap config clk: meson: a1: peripherals: determine maximum register in regmap config * clk-binding: dt-bindings: clock: fixed: Define a preferred node name * clk-rockchip: clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock clk: rockchip: rk3588: Add reset line for HDMI Receiver clk: rockchip: rk3568: Add missing USB480M_PHY mux dt-bindings: reset: Define reset id used for HDMI Receiver dt-bindings: clock: rockchip: add USB480M_PHY mux
2024-05-16Merge branches 'clk-stm', 'clk-renesas', 'clk-scmi' and 'clk-allwinner' into ↵Stephen Boyd52-201/+3672
clk-next - STM32MP257 SoC clk driver - Allocate clk_ops dynamically for SCMI clk driver * clk-stm: dt-bindings: clocks: stm32mp25: add access-controllers description clk: stm32: introduce clocks for STM32MP257 platform dt-bindings: clocks: stm32mp25: add description of all parents clk: stm32mp13: use platform device APIs * clk-renesas: clk: renesas: r9a08g045: Add support for power domains clk: renesas: rzg2l: Extend power domain support dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for RZ/G3S dt-bindings: clock: r9a08g045-cpg: Add power domain IDs dt-bindings: clock: r9a07g054-cpg: Add power domain IDs dt-bindings: clock: r9a07g044-cpg: Add power domain IDs dt-bindings: clock: r9a07g043-cpg: Add power domain IDs clk: renesas: shmobile: Remove unused CLK_ENABLE_ON_INIT clk: renesas: r8a7740: Remove unused div4_clk.flags field clk: renesas: r9a07g043: Add clock and reset entry for PLIC clk: renesas: r8a779h0: Add INTC-EX clock clk: renesas: r8a779h0: Add MSIOF clocks clk: renesas: r8a779a0: Fix CANFD parent clock clk: rs9: fix wrong default value for clock amplitude clk: renesas: r8a779h0: Add timer clocks clk: renesas: r8a779h0: Add SCIF clocks clk: renesas: r9a07g044: Mark resets array as const clk: renesas: r9a07g043: Mark mod_clks and resets arrays as const clk: renesas: r8a779h0: Add thermal clock dt-bindings: clock: r9a07g043-cpg: Annotate RZ/G2UL-only core clocks * clk-scmi: clk: scmi: Add support for get/set duty_cycle operations clk: scmi: Add support for re-parenting restricted clocks clk: scmi: Add support for rate change restricted clocks clk: scmi: Add support for state control restricted clocks clk: scmi: Allocate CLK operations dynamically * clk-allwinner: clk: sunxi-ng: fix module autoloading clk: sunxi-ng: a64: Add constraints on PLL-MIPI's n/m ratio and parent rate clk: sunxi-ng: nkm: Support constraints on m/n ratio and parent rate
2024-05-16Merge branches 'clk-cleanup', 'clk-airoha', 'clk-mediatek', 'clk-sophgo' and ↵Stephen Boyd20-301/+4046
'clk-loongson' into clk-next - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver * clk-cleanup: clk: gemini: Remove an unused field in struct clk_gemini_pci clk: highbank: Remove an unused field in struct hb_clk clk: ti: dpll: fix incorrect #ifdef checks clk: nxp: Remove an unused field in struct lpc18xx_pll * clk-airoha: clk: en7523: Add EN7581 support clk: en7523: Add en_clk_soc_data data structure dt-bindings: clock: airoha: add EN7581 binding * clk-mediatek: clk: mediatek: mt8365-mm: fix DPI0 parent clk: mediatek: pllfh: Don't log error for missing fhctl node * clk-sophgo: clk: sophgo: avoid open-coded 64-bit division clk: sophgo: Make synthesizer struct static clk: sophgo: Add clock support for SG2000 SoC clk: sophgo: Add clock support for CV1810 SoC clk: sophgo: Add clock support for CV1800 SoC dt-bindings: clock: sophgo: Add clock controller of SG2000 series SoC * clk-loongson: clk: clk-loongson2: Add Loongson-2K2000 clock support dt-bindings: clock: loongson2: Add Loongson-2K2000 compatible clk: clk-loongson2: Add Loongson-2K0500 clock support dt-bindings: clock: loongson2: Add Loongson-2K0500 compatible clk: clk-loongson2: Refactor driver for adding new platforms dt-bindings: clock: Add Loongson-2K expand clock index
2024-05-16Merge tag 'for-netdev' of ↵Jakub Kicinski8-9/+20
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-05-17 We've added 7 non-merge commits during the last 2 day(s) which contain a total of 8 files changed, 20 insertions(+), 9 deletions(-). The main changes are: 1) Fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup and add BPF selftests to cover this case, from Andrii Nakryiko. (Report https://lore.kernel.org/bpf/[email protected]/) 2) Fix two BPF selftests to adjust for kernel changes after fast-forwarding Linus' tree to make BPF CI all green again, from Martin KaFai Lau. 3) Fix libbpf feature detectors when using token_fd by adjusting the attribute size for memset to cover the former, also from Andrii Nakryiko. 4) Fix the description of 'src' in ALU instructions for the BPF ISA standardization doc, from Puranjay Mohan. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Adjust btf_dump test to reflect recent change in file_operations selftests/bpf: Adjust test_access_variable_array after a kernel function name change selftests/bpf: add more variations of map-in-map situations bpf: save extended inner map info for percpu array maps as well MAINTAINERS: Update ARM64 BPF JIT maintainer bpf, docs: Fix the description of 'src' in ALU instructions libbpf: fix feature detectors when using token_fd ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-17selftests/bpf: Adjust btf_dump test to reflect recent change in file_operationsMartin KaFai Lau1-1/+1
The btf_dump test fails: test_btf_dump_struct_data:FAIL:file_operations unexpected file_operations: actual '(struct file_operations){ .owner = (struct module *)0xffffffffffffffff, .fop_flags = (fop_flags_t)4294967295, .llseek = (loff_t (*)(struct f' != expected '(struct file_operations){ .owner = (struct module *)0xffffffffffffffff, .llseek = (loff_t (*)(struct file *, loff_t, int))0xffffffffffffffff,' The "fop_flags" is a recent addition to the struct file_operations in commit 210a03c9d51a ("fs: claw back a few FMODE_* bits") This patch changes the test_btf_dump_struct_data() to reflect this change. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-05-17selftests/bpf: Adjust test_access_variable_array after a kernel function ↵Martin KaFai Lau1-1/+1
name change After commit 4c3e509ea9f2 ("sched/balancing: Rename load_balance() => sched_balance_rq()"), the load_balance kernel function is renamed to sched_balance_rq. This patch adjusts the fentry program in test_access_variable_array.c to reflect this kernel function name change. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-05-16Merge tag 'platform-drivers-x86-v6.10-1' of ↵Linus Torvalds85-1197/+5938
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - New drivers/platform/arm64 directory for arm64 embedded-controller drivers - New drivers: - Acer Aspire 1 embedded controllers (for arm64 models) - ACPI quickstart PNP0C32 buttons - Dell All-In-One backlight support (dell-uart-backlight) - Lenovo WMI camera buttons - Lenovo Yoga Tablet 2 Pro 1380F/L fast charging - MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only) - MSI WMI sensors (fan speed sensors only for now) - Asus WMI: - 2024 ROG Mini-LED support - MCU powersave support - Vivobook GPU MUX support - Misc. other improvements - Ideapad laptop: - Export FnLock LED as LED class device - Switch platform profiles using thermal management key - Intel drivers: - IFS: various improvements - PMC: Lunar Lake support - SDSI: various improvements - TPMI/ISST: various improvements - tools: intel-speed-select: various improvements - MS Surface drivers: - Fan profile switching support - Surface Pro thermal sensors support - ThinkPad ACPI: - Reworked hotkey support to use sparse keymaps - Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys - WMI core: - New WMI driver development guide - x86 Android tablets: - Lenovo Yoga Tablet 2 Pro 1380F/L support - Xiaomi MiPad 2 status LED and bezel touch buttons backlight support - Miscellaneous cleanups / fixes / improvements * tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits) platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver devm-helpers: Fix a misspelled cancellation in the comments tools arch x86: Add dell-uart-backlight-emulator platform/x86: Add new Dell UART backlight driver platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates platform/x86: x86-android-tablets: Pass struct device to init() platform/x86/amd: pmc: Add new ACPI ID AMDI000B platform/x86/amd: pmf: Add new ACPI ID AMDI0105 platform/x86: p2sb: Don't init until unassigned resources have been assigned platform/surface: aggregator: Log critical errors during SAM probing platform/x86: ISST: Support SST-BF and SST-TF per level platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit() tools/power/x86/intel-speed-select: v1.19 release tools/power/x86/intel-speed-select: Display CPU as None for -1 tools/power/x86/intel-speed-select: SST BF/TF support per level tools/power/x86/intel-speed-select: Increase number of CPUs displayed tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq tools/power/x86/intel-speed-select: Fix display for unsupported levels tools/power/x86/intel-speed-select: Support multiple dies ...
2024-05-16Merge tag 'mtd/for-6.10' of ↵Linus Torvalds11-12/+212
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD: - Simon Glass wanted to support binman's output properties in order to check their validity using the binding checks and proposed changes with the missing properties as well as a binman compatible. - Krzysztof Kozlowski on his side shared a new yaml for describing Samsung's OneNAND interface. - The interface with NVMEM has also been slightly improved/fixed, especially now that OTP are also supported in the NAND subsystem. - Along with these changes, small cleanups have also been contributed around ID tables, structure sizes, arithmetic checks and comments. Raw NAND subsystem: - Two small fixes, one in the Hynix vendor code for properly returning an error which might have been ignored and another in the Davinci driver to properly synchronize the controller with the gpio domain. SPI NOR subsystem: - SPI NOR now uses div_u64() instead of div64_u64() in places where the divisor is 32 bits. Many 32 bit architectures can optimize this variant better than a full 64 bit divide" * tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: replace unnecessary div64_u64() with div_u64() mtd: mchp23k256: drop unneeded MODULE_ALIAS dt-bindings: mtd: fixed-partition: Add binman compatibles dt-bindings: mtd: fixed-partitions: Add alignment properties mtd: maps: sa1100-flash: Prefer struct_size over open coded arithmetic mtd: core: Align comment with an action in mtd_otp_nvmem_add() mtd: rawnand: hynix: fixed typo mtd: rawnand: davinci: Add dummy read after sending command mtd: partitions: redboot: Added conversion of operands to a larger type dt-bindings: mtd: Add Samsung S5Pv210 OneNAND mtd: core: Don't fail mtd_otp_nvmem_add() if OTP is unsupported mtd: core: Report error if first mtd_otp_size() call fails in mtd_otp_nvmem_add()
2024-05-16Merge tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds39-396/+826
Pull MMC updates from Ulf Hansson: "MMC core: - Increase the timeout period of the ACMD41 command - Add card entry for quirks to debugfs - Add mmc_gpiod_set_cd_config() function - Store owner from SDIO modules with sdio_register_driver() MMC host: - atmel-mci: Some cleanups and a switch to use dev_err_probe() - renesas_sdhi: - Add support for RZ/G2L, RZ/G3S and RZ/V2M variants - Set the SDBUF after reset - sdhci: Add support for "Tuning Error" interrupts - sdhci-acpi: - Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA - Disable write protect detection on Toshiba WT10-A - Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working - sdhci_am654: - Re-work and fix the tuning support for multiple speed-modes - Add tuning algorithm for delay chain - sdhci-esdhc-imx: Add NXP S32G3 support - sdhci-of-dwcmshc: - Add tuning support for Sophgo CV1800B and SG200X - Implement SDHCI CQE support - sdhci-pci-gli: Use the proper pci_set_power_state() instead of PMCSR writes" MEMSTICK: - Convert a couple of drivers to use the ->remove_new() callback" * tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list mmc: renesas_sdhi: Set the SDBUF after reset mmc: core: Increase the timeout period of the ACMD41 command mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too mmc: atmel-mci: Switch to use dev_err_probe() mmc: atmel-mci: Incapsulate used to be a platform data into host structure mmc: atmel-mci: Replace platform device pointer by generic one mmc: atmel-mci: Use temporary variable for struct device mmc: atmel-mci: Get rid of platform data leftovers mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning mmc: sdhci-s3c: Choose sdhci_ops based on variant mmc: sdhci_am654: Constify struct sdhci_ops mmc: sdhci-sprd: Constify struct sdhci_ops mmc: sdhci-omap: Constify struct sdhci_ops mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops mmc: slot-gpio: Use irq_handler_t type mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA ...
2024-05-16Merge tag 'pmdomain-v6.10' of ↵Linus Torvalds13-109/+127
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Don't clear suspended_count at genpd_prepare() - Update the rejected/usage counters at system suspend too pmdomain providers: - ti-sci: Fix duplicate PD referrals - mediatek: Add MT8188 buck isolation setting - renesas: Add R-Car M3-W power-off delay quirk - renesas: Split R-Car M3-W and M3-W+ sub-drivers cpuidle-psci: - Update MAINTAINERS to set a git for DT IDLE PM DOMAIN/ARM PSCI PM DOMAIN - Update init level to core_initcall() - Drop superfluous wrappers psci_dt_attach|detach_cpu()" * tag 'pmdomain-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: ti-sci: Fix duplicate PD referrals pmdomain: core: Don't clear suspended_count at genpd_prepare() pmdomain: core: Update the rejected/usage counters at system suspend too pmdomain: renesas: rcar-sysc: Add R-Car M3-W power-off delay quirk pmdomain: renesas: rcar-sysc: Remove rcar_sysc_nullify() helper pmdomain: renesas: rcar-sysc: Split R-Car M3-W and M3-W+ sub-drivers pmdomain: renesas: rcar-sysc: Absorb rcar_sysc_ch into rcar_sysc_pd MAINTAINERS: Add a git for the DT IDLE PM DOMAIN MAINTAINERS: Add a git for the ARM PSCI PM DOMAIN cpuidle: psci: Update init level to core_initcall() cpuidle: psci: Drop superfluous wrappers psci_dt_attach|detach_cpu() pmdomain: mediatek: Add MT8188 buck isolation setting pmdomain: mediatek: scpsys: drop driver owner assignment
2024-05-16Merge tag 'media/v6.10-1' of ↵Linus Torvalds307-5428/+22908
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New V4L2 ioctl VIDIOC_REMOVE_BUFS - experimental support for using generic metaformats on V4L2 core - New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x - More cleanups at atomisp driver - Usual bunch of driver cleanups, improvements and fixes * tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits) media: bcm2835-unicam: Depend on COMMON_CLK Revert "media: v4l2-ctrls: show all owned controls in log_status" media: ov2740: Ensure proper reset sequence on probe() media: intel/ipu6: Don't print user-triggerable errors to kernel log media: bcm2835-unicam: Fix driver path in MAINTAINERS media: bcm2835-unicam: Fix a NULL vs IS_ERR() check media: bcm2835-unicam: Do not print error when irq not found media: bcm2835-unicam: Do not replace IRQ retcode during probe media: bcm2835-unicam: Convert to platform remove callback returning void media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping" media: intel/ipu6: explicitly include vmalloc.h media: cec.h: Fix kerneldoc media: uvcvideo: Refactor iterators media: v4l: async: refactor v4l2_async_create_ancillary_links media: intel/ipu6: Don't re-allocate memory for firmware media: dvb-frontends: tda10048: Fix integer overflow media: tc358746: Use the correct div_ function media: i2c: st-mipid02: Use the correct div function media: tegra-vde: Refactor timeout handling media: stk1160: Use min macro ...
2024-05-16Merge tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds2-2/+37
Pull drm fix from Dave Airlie: - fix breakage in buddy allocator * tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernel: drm/tests: Add a unit test for range bias allocation drm/buddy: Fix the range bias clear memory allocation issue
2024-05-16rtla: Documentation: Fix -t, --traceJohn Kacur3-4/+8
Move -t, --trace from common_options.rst to common_osnoise_options.rst and common_timerlat_options.rst so that it will appear in the man pages rtla-timerlat-hist.1 rtla-timerlat-top.1 rtla-osnoise-hist.1 rtla-osnoise-top.1 Remove the equals ('=') sign and add a space. Link: https://lkml.kernel.org/r/[email protected] Cc: Daniel Bristot de Oliveria <[email protected]> Signed-off-by: John Kacur <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-16rtla: Fix -t\--trace[=file]John Kacur4-20/+36
The -t option has an optional argument. The usual case is for a short option to be specified without an '=' and for the long version to be specified with an '=' Various forms of this do not work as expected. For example: rtla timerlat hist -T50 -tfile.txt will result in a truncated file name of "ile.txt" Another example is that the long form without the '=' will result in the default file name instead of the requested file name. This patch properly parses the optional argument with and without '=' and with and without spaces for the short form. This patch was also tested using -t and --trace without providing a file name both as the last requested option and with a following long and short option. For example: rtla timerlat hist -T50 -t -u rtla timerlat hist -T50 --trace -u This fix is applied to both timerlat top and hist and to osnoise top and hist. Here is the full testing for rtla timerlat hist. Before applying the patch rtla timerlat hist -T50 -t=file.txt Works as expected, "file.txt" rtla timerlat hist -T50 -tfile.txt Truncated file name "ile.txt" rtla timerlat hist -T50 -t file.txt Default file name instead of file.txt rtla timerlat hist -T50 --trace=file.txt Truncated file name "ile.txt" rtla timerlat hist -T50 --trace file.txt Default file name "timerlat_trace.txt" instead of "file.txt" After applying the patch: rtla timerlat hist -T50 -t=file.txt Works as expected, "file.txt" rtla timerlat hist -T50 -tfile.txt Works as expected, "file.txt" rtla timerlat hist -T50 -t file.txt Works as expected, "file.txt" rtla timerlat hist -T50 --trace=file.txt Works as expected, "file.txt" rtla timerlat hist -T50 --trace file.txt Works as expected, "file.txt" In addition the following tests were performed to make sure that the default file name worked as expected including with trailing options. rtla timerlat hist -T50 -t Works as expected "timerlat_trace.txt" rtla timerlat hist -T50 --trace Works as expected "timerlat_trace.txt" rtla timerlat hist -T50 -t -u Works as expected "timerlat_trace.txt" rtla timerlat hist -T50 --trace -u Works as expected "timerlat_trace.txt" Link: https://lkml.kernel.org/r/[email protected] Cc: Daniel Bristot de Oliveria <[email protected]> Signed-off-by: John Kacur <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-16rtla/timerlat: Fix histogram report when a cpu count is 0John Kacur1-18/+42
On short runs it is possible to get no samples on a cpu, like this: # rtla timerlat hist -u -T50 Index IRQ-001 Thr-001 Usr-001 IRQ-002 Thr-002 Usr-002 2 1 0 0 0 0 0 33 0 1 0 0 0 0 36 0 0 1 0 0 0 49 0 0 0 1 0 0 52 0 0 0 0 1 0 over: 0 0 0 0 0 0 count: 1 1 1 1 1 0 min: 2 33 36 49 52 18446744073709551615 avg: 2 33 36 49 52 - max: 2 33 36 49 52 0 rtla timerlat hit stop tracing IRQ handler delay: (exit from idle) 48.21 us (91.09 %) IRQ latency: 49.11 us Timerlat IRQ duration: 2.17 us (4.09 %) Blocking thread: 1.01 us (1.90 %) swapper/2:0 1.01 us ------------------------------------------------------------------------ Thread latency: 52.93 us (100%) Max timerlat IRQ latency from idle: 49.11 us in cpu 2 Note, the value 18446744073709551615 is the same as ~0. Fix this by reporting no results for the min, avg and max if the count is 0. Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Suggested-by: Daniel Bristot de Oliveria <[email protected]> Signed-off-by: John Kacur <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-16rtla: Add --trace-buffer-size optionDaniel Bristot de Oliveira8-5/+71
Add the option allow the users to set a different buffer size for the trace. For example, in large systems, the user might be interested on reducing the trace buffer to avoid large tracing files. The buffer size is specified in kB, and it is only affecting the tracing instance. The function trace_set_buffer_size() appears on libtracefs v1.6, so increase the minimum required version on Makefile.config. Link: https://lkml.kernel.org/r/e7c9ca5b3865f28e131a49ec3b984fadf2d056c6.1715860611.git.bristot@kernel.org Cc: Jonathan Corbet <[email protected]> Cc: Juri Lelli <[email protected]> Cc: John Kacur <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-05-16powerpc/fadump: Fix section mismatch warningMichael Ellerman1-1/+1
With some compilers/configs fadump_setup_param_area() isn't inlined into its caller (which is __init), leading to a section mismatch warning: WARNING: modpost: vmlinux: section mismatch in reference: fadump_setup_param_area+0x200 (section: .text.fadump_setup_param_area) -> memblock_phys_alloc_range (section: .init.text) Fix it by adding an __init annotation. Fixes: 683eab94da75 ("powerpc/fadump: setup additional parameters for dump capture kernel") Reported-by: Stephen Rothwell <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2024-05-16Merge branches 'amba', 'cfi', 'clkdev' and 'misc' into for-linusRussell King (Oracle)64-989/+2591
2024-05-16x86/boot: Add a fallthrough annotationBorislav Petkov2-0/+2
Add implicit fallthrough checking to the decompressor code and fix this warning: arch/x86/boot/printf.c: In function ‘vsprintf’: arch/x86/boot/printf.c:248:10: warning: this statement may fall through [-Wimplicit-fallthrough=] 248 | flags |= SMALL; | ^ arch/x86/boot/printf.c:249:3: note: here 249 | case 'X': | ^~~~ This is a patch from three years ago which I found in my trees, thus the SUSE authorship still. Signed-off-by: Borislav Petkov <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-05-16Merge tag 'nand/for-6.10' into mtd/nextMiquel Raynal2-2/+5
Raw NAND: Two small fixes, one in the Hynix vendor code for properly returning an error which might have been ignored and another in the Davinci driver to properly synchronize the controller with the gpio domain. Signed-off-by: Miquel Raynal <[email protected]>
2024-05-16Merge tag 'spi-nor/for-6.10' into mtd/nextMiquel Raynal1-2/+2
SPI NOR now uses div_u64() instead of div64_u64() in places where the divisor is 32 bits. Many 32 bit architectures can optimize this variant better than a full 64 bit divide. Signed-off-by: Miquel Raynal <[email protected]>
2024-05-16selftests/net/lib: no need to record ns name if it already existHangbin Liu1-2/+4
There is no need to add the name to ns_list again if the netns already recoreded. Fixes: 25ae948b4478 ("selftests/net: add lib.sh") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-05-16net: qrtr: ns: Fix module refcntChris Lew1-0/+27
The qrtr protocol core logic and the qrtr nameservice are combined into a single module. Neither the core logic or nameservice provide much functionality by themselves; combining the two into a single module also prevents any possible issues that may stem from client modules loading inbetween qrtr and the ns. Creating a socket takes two references to the module that owns the socket protocol. Since the ns needs to create the control socket, this creates a scenario where there are always two references to the qrtr module. This prevents the execution of 'rmmod' for qrtr. To resolve this, forcefully put the module refcount for the socket opened by the nameservice. Fixes: a365023a76f2 ("net: qrtr: combine nameservice into main module") Reported-by: Jeffrey Hugo <[email protected]> Tested-by: Jeffrey Hugo <[email protected]> Signed-off-by: Chris Lew <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Jeffrey Hugo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-05-16net: lan966x: remove debugfs directory in probe() error pathHerve Codina1-2/+4
A debugfs directory entry is create early during probe(). This entry is not removed on error path leading to some "already present" issues in case of EPROBE_DEFER. Create this entry later in the probe() code to avoid the need to change many 'return' in 'goto' and add the removal in the already present error path. Fixes: 942814840127 ("net: lan966x: Add VCAP debugFS support") Cc: <[email protected]> Signed-off-by: Herve Codina <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Horatiu Vultur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-05-16drm/tests: Add a unit test for range bias allocationArunpravin Paneer Selvam1-1/+35
Allocate cleared blocks in the bias range when the DRM buddy's clear avail is zero. This will validate the bias range allocation in scenarios like system boot when no cleared blocks are available and exercise the fallback path too. The resulting blocks should always be dirty. v1:(Matthew) - move the size to the variable declaration section. - move the mm.clear_avail init to allocator init. Signed-off-by: Arunpravin Paneer Selvam <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-16drm/buddy: Fix the range bias clear memory allocation issueArunpravin Paneer Selvam1-1/+2
Problem statement: During the system boot time, an application request for the bulk volume of cleared range bias memory when the clear_avail is zero, we dont fallback into normal allocation method as we had an unnecessary clear_avail check which prevents the fallback method leads to fb allocation failure following system goes into unresponsive state. Solution: Remove the unnecessary clear_avail check in the range bias allocation function. v2: add a kunit for this corner case (Daniel Vetter) Signed-off-by: Arunpravin Paneer Selvam <[email protected]> Fixes: 96950929eb23 ("drm/buddy: Implement tracking clear page feature") Reviewed-by: Matthew Auld <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-15tools/power turbostat: version 2024.05.10Len Brown1-1/+1
New since 2024.04.08: Len Brown (6): tools/power turbostat: Add "snapshot:" Makefile target tools/power turbostat: Harden probe_intel_uncore_frequency() tools/power turbostat: Remember global max_die_id tools/power turbostat: Survive sparse die_id tools/power turbostat: Add columns for clustered uncore frequency tools/power turbostat: version 2024.05.10 Patryk Wlazlyn (7): tools/power turbostat: Replace _Static_assert with BUILD_BUG_ON tools/power turbostat: Enable non-privileged users to read sysfs counters tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs tools/power turbostat: Read Core-cstates via perf tools/power turbostat: Read Package-cstates via perf tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings tools/power turbostat: Ignore pkg_cstate_limit when it is not available Zhang Rui (2): tools/power turbostat: Enhance ARL/LNL support tools/power turbostat: Add ARL-H support Signed-off-by: Len Brown <[email protected]>
2024-05-15tools/power turbostat: Ignore pkg_cstate_limit when it is not availablePatryk Wlazlyn1-4/+3
When running in no-msr mode, the pkg_cstate_limit is not populated, thus we use perf to determine if given pcstate counter is present on the platform. Signed-off-by: Patryk Wlazlyn <[email protected]> Signed-off-by: Len Brown <[email protected]>
2024-05-15tools/power turbostat: Fix order of strings in pkg_cstate_limit_stringsPatryk Wlazlyn1-1/+1
Change the order so that it matches the indexes defined in: Signed-off-by: Patryk Wlazlyn <[email protected]> Signed-off-by: Len Brown <[email protected]>
2024-05-15tools/power turbostat: Read Package-cstates via perfPatryk Wlazlyn1-130/+244
Reading the counters via perf can be done in bulk with a single syscall, making the counter values more accurate with respect to one another by minimizing the time gap between individual counter reads. Signed-off-by: Patryk Wlazlyn <[email protected]> Signed-off-by: Len Brown <[email protected]>
2024-05-15tools/power turbostat: Read Core-cstates via perfPatryk Wlazlyn1-44/+335
Reading the counters via perf can be done in bulk with a single syscall, making the counter values more accurate with respect to one another by minimizing the time gap between individual counter reads. Signed-off-by: Patryk Wlazlyn <[email protected]> Signed-off-by: Len Brown <[email protected]>
2024-05-15tools/power turbostat: Avoid possible memory corruption due to sparse ↵Patryk Wlazlyn1-6/+19
topology IDs Save the highest core and package id when parsing topology to allocate enough memory when get_rapl_counters() is called with a core or a package id as a domain. Note that RAPL domains are per-package on Intel, but per-core on AMD. Thus, the RAPL code effectively runs in different modes on those two product lines. Signed-off-by: Patryk Wlazlyn <[email protected]> Signed-off-by: Len Brown <[email protected]>
2024-05-15tools/power turbostat: Add columns for clustered uncore frequencyLen Brown2-120/+226
New machines have multiple uncore frequencies per package, visible in /sys/devices/system/cpu/intel_uncore_frequency/uncore##/ turbostat now samples these frequencies each measurement interval. For each package, turbostat now prints "UMHzX.Y" columns, where X = domain_id, and Y = fabric_cluster_id. The system summary for each UMHzX.Y column is the average value for across all of the packages in the system. Signed-off-by: Len Brown <[email protected]>
2024-05-15Merge tag 'wq-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds4-193/+327
Pull workqueue updates from Tejun Heo: - Work items can now be disabled and enabled, and cancel_work_sync() and disable_work() can be called form atomic contexts for BH work items. This closes feature gap with tasklet and should allow converting all existing tasklet users to BH workqueues. - Improve pool sharing for unbound workqueues with strict affinity. - Misc changes including doc updates, improved debug annotations and cleanups. * tag 'wq-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Use "@..." in function comment to describe variable length argument workqueue: Add destroy_work_on_stack() in workqueue_softirq_dead() workqueue: remove unnecessary import and function in wq_monitor.py workqueue: Introduce enable_and_queue_work() convenience function workqueue: add function in event of workqueue_activate_work workqueue: Cleanup subsys attribute registration workqueue: Use list_last_entry() to get the last idle worker workqueue: Move attrs->cpumask out of worker_pool's properties when attrs->affn_strict workqueue: Use INIT_WORK_ONSTACK in workqueue_softirq_dead() workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items workqueue: Remember whether a work item was on a BH workqueue workqueue: Remove WORK_OFFQ_CANCELING workqueue: Implement disable/enable for (delayed) work items workqueue: Preserve OFFQ bits in cancel[_sync] paths
2024-05-15Merge tag 'cgroup-for-6.10' of ↵Linus Torvalds27-223/+358
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - The locking around cpuset hotplug processing has always been a bit of mess which was worked around by making hotplug processing asynchronous. The asynchronity isn't great and led to other issues. We tried to make the behavior synchronous a while ago but that led to lockdep splats. Waiman took another stab at cleaning up and making it synchronous. The patch has been in -next for well over a month and there haven't been any complaints, so fingers crossed. - Tracepoints added to help understanding rstat lock contentions. - A bunch of minor changes - doc updates, code cleanups and selftests. * tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits) cgroup/rstat: add cgroup_rstat_cpu_lock helpers and tracepoints selftests/cgroup: Drop define _GNU_SOURCE docs: cgroup-v1: Update page cache removal functions selftests/cgroup: fix uninitialized variables in test_zswap.c selftests/cgroup: cpu_hogger init: use {} instead of {NULL} selftests/cgroup: fix clang warnings: uninitialized fd variable selftests/cgroup: fix clang build failures for abs() calls cgroup/cpuset: Remove outdated comment in sched_partition_write() cgroup/cpuset: Fix incorrect top_cpuset flags cgroup/cpuset: Avoid clearing CS_SCHED_LOAD_BALANCE twice cgroup/cpuset: Statically initialize more members of top_cpuset cgroup: Avoid unnecessary looping in cgroup_no_v1() cgroup, legacy_freezer: update comment for freezer_css_offline() docs, cgroup: add entries for pids to cgroup-v2.rst cgroup: don't call cgroup1_pidlist_destroy_all() for v2 cgroup_freezer: update comment for freezer_css_online() cgroup/rstat: desc member cgrp in cgroup_rstat_flush_release cgroup/rstat: add cgroup_rstat_lock helpers and tracepoints cgroup/pids: Remove superfluous zeroing docs: cgroup-v1: Fix description for css_online ...
2024-05-16kprobe/ftrace: bail out if ftrace was killedStephen Brennan10-0/+35
If an error happens in ftrace, ftrace_kill() will prevent disarming kprobes. Eventually, the ftrace_ops associated with the kprobes will be freed, yet the kprobes will still be active, and when triggered, they will use the freed memory, likely resulting in a page fault and panic. This behavior can be reproduced quite easily, by creating a kprobe and then triggering a ftrace_kill(). For simplicity, we can simulate an ftrace error with a kernel module like [1]: [1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer sudo perf probe --add commit_creds sudo perf trace -e probe:commit_creds # In another terminal make sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug # Back to perf terminal # ctrl-c sudo perf probe --del commit_creds After a short period, a page fault and panic would occur as the kprobe continues to execute and uses the freed ftrace_ops. While ftrace_kill() is supposed to be used only in extreme circumstances, it is invoked in FTRACE_WARN_ON() and so there are many places where an unexpected bug could be triggered, yet the system may continue operating, possibly without the administrator noticing. If ftrace_kill() does not panic the system, then we should do everything we can to continue operating, rather than leave a ticking time bomb. Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Stephen Brennan <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Acked-by: Guo Ren <[email protected]> Reviewed-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2024-05-15cifs: fix data corruption in read after invalidateSteve French1-1/+3
When invalidating a file as part of breaking a lease, the folios holding the file data are disposed of, and truncate calls ->invalidate_folio() to get rid of them rather than calling ->release_folio(). This means that the netfs_inode::zero_point value didn't get updated in current upstream code to reflect the point after which we can assume that the server will only return zeroes, and future reads will then return blocks of zeroes if the file got extended for any region beyond the old zero point. Fix this by updating zero_point before invalidating the inode in cifs_revalidate_mapping(). Suggested-by: David Howells <[email protected]> Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib") Reviewed-by: David Howells <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-05-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds262-4204/+8891
Pull KVM updates from Paolo Bonzini: "ARM: - Move a lot of state that was previously stored on a per vcpu basis into a per-CPU area, because it is only pertinent to the host while the vcpu is loaded. This results in better state tracking, and a smaller vcpu structure. - Add full handling of the ERET/ERETAA/ERETAB instructions in nested virtualisation. The last two instructions also require emulating part of the pointer authentication extension. As a result, the trap handling of pointer authentication has been greatly simplified. - Turn the global (and not very scalable) LPI translation cache into a per-ITS, scalable cache, making non directly injected LPIs much cheaper to make visible to the vcpu. - A batch of pKVM patches, mostly fixes and cleanups, as the upstreaming process seems to be resuming. Fingers crossed! - Allocate PPIs and SGIs outside of the vcpu structure, allowing for smaller EL2 mapping and some flexibility in implementing more or less than 32 private IRQs. - Purge stale mpidr_data if a vcpu is created after the MPIDR map has been created. - Preserve vcpu-specific ID registers across a vcpu reset. - Various minor cleanups and improvements. LoongArch: - Add ParaVirt IPI support - Add software breakpoint support - Add mmio trace events support RISC-V: - Support guest breakpoints using ebreak - Introduce per-VCPU mp_state_lock and reset_cntx_lock - Virtualize SBI PMU snapshot and counter overflow interrupts - New selftests for SBI PMU and Guest ebreak - Some preparatory work for both TDX and SNP page fault handling. This also cleans up the page fault path, so that the priorities of various kinds of fauls (private page, no memory, write to read-only slot, etc.) are easier to follow. x86: - Minimize amount of time that shadow PTEs remain in the special REMOVED_SPTE state. This is a state where the mmu_lock is held for reading but concurrent accesses to the PTE have to spin; shortening its use allows other vCPUs to repopulate the zapped region while the zapper finishes tearing down the old, defunct page tables. - Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which is defined by hardware but left for software use. This lets KVM communicate its inability to map GPAs that set bits 51:48 on hosts without 5-level nested page tables. Guest firmware is expected to use the information when mapping BARs; this avoids that they end up at a legal, but unmappable, GPA. - Fixed a bug where KVM would not reject accesses to MSR that aren't supposed to exist given the vCPU model and/or KVM configuration. - As usual, a bunch of code cleanups. x86 (AMD): - Implement a new and improved API to initialize SEV and SEV-ES VMs, which will also be extendable to SEV-SNP. The new API specifies the desired encryption in KVM_CREATE_VM and then separately initializes the VM. The new API also allows customizing the desired set of VMSA features; the features affect the measurement of the VM's initial state, and therefore enabling them cannot be done tout court by the hypervisor. While at it, the new API includes two bugfixes that couldn't be applied to the old one without a flag day in userspace or without affecting the initial measurement. When a SEV-ES VM is created with the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected once the VMSA has been encrypted. Also, the FPU and AVX state will be synchronized and encrypted too. - Support for GHCB version 2 as applicable to SEV-ES guests. This, once more, is only accessible when using the new KVM_SEV_INIT2 flow for initialization of SEV-ES VMs. x86 (Intel): - An initial bunch of prerequisite patches for Intel TDX were merged. They generally don't do anything interesting. The only somewhat user visible change is a new debugging mode that checks that KVM's MMU never triggers a #VE virtualization exception in the guest. - Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig VM-Exit to L1, as per the SDM. Generic: - Use vfree() instead of kvfree() for allocations that always use vcalloc() or __vcalloc(). - Remove .change_pte() MMU notifier - the changes to non-KVM code are small and Andrew Morton asked that I also take those through the KVM tree. The callback was only ever implemented by KVM (which was also the original user of MMU notifiers) but it had been nonfunctional ever since calls to set_pte_at_notify were wrapped with invalidate_range_start and invalidate_range_end... in 2012. Selftests: - Enhance the demand paging test to allow for better reporting and stressing of UFFD performance. - Convert the steal time test to generate TAP-friendly output. - Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed time across two different clock domains. - Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT. - Avoid unnecessary use of "sudo" in the NX hugepage test wrapper shell script, to play nice with running in a minimal userspace environment. - Allow skipping the RSEQ test's sanity check that the vCPU was able to complete a reasonable number of KVM_RUNs, as the assert can fail on a completely valid setup. If the test is run on a large-ish system that is otherwise idle, and the test isn't affined to a low-ish number of CPUs, the vCPU task can be repeatedly migrated to CPUs that are in deep sleep states, which results in the vCPU having very little net runtime before the next migration due to high wakeup latencies. - Define _GNU_SOURCE for all selftests to fix a warning that was introduced by a change to kselftest_harness.h late in the 6.9 cycle, and because forcing every test to #define _GNU_SOURCE is painful. - Provide a global pseudo-RNG instance for all tests, so that library code can generate random, but determinstic numbers. - Use the global pRNG to randomly force emulation of select writes from guest code on x86, e.g. to help validate KVM's emulation of locked accesses. - Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception handlers at VM creation, instead of forcing tests to manually trigger the related setup. Documentation: - Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits) selftests/kvm: remove dead file KVM: selftests: arm64: Test vCPU-scoped feature ID registers KVM: selftests: arm64: Test that feature ID regs survive a reset KVM: selftests: arm64: Store expected register value in set_id_regs KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope KVM: arm64: Only reset vCPU-scoped feature ID regs once KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs() KVM: arm64: Rename is_id_reg() to imply VM scope KVM: arm64: Destroy mpidr_data for 'late' vCPU creation KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support KVM: arm64: Fix hvhe/nvhe early alias parsing KVM: SEV: Allow per-guest configuration of GHCB protocol version KVM: SEV: Add GHCB handling for termination requests KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests KVM: SEV: Add support to handle AP reset MSR protocol KVM: x86: Explicitly zero kvm_caps during vendor module load KVM: x86: Fully re-initialize supported_mce_cap on vendor module load KVM: x86: Fully re-initialize supported_vm_types on vendor module load KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values ...
Powered by cgit, Gruvboxed by Blaster4385.