aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-06-12i2c: acorn: fix i2c warningRussell King1-0/+1
The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name" warning in the I2C core driver, resulting in the RTC being inaccessible. Fix this. Fixes: 2236baa75f70 ("i2c: Sanity checks on adapter registration") Signed-off-by: Russell King <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2019-06-12arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGSNathan Chancellor1-1/+1
This is a GCC only option, which warns about ABI changes within GCC, so unconditionally adding it breaks Clang with tons of: warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option] and link time failures: ld.lld: error: undefined symbol: __efistub___stack_chk_guard >>> referenced by arm-stub.c:73 (/home/nathan/cbl/linux/drivers/firmware/efi/libstub/arm-stub.c:73) >>> arm-stub.stub.o:(__efistub_install_memreserve_table) in archive ./drivers/firmware/efi/libstub/lib.a These failures come from the lack of -fno-stack-protector, which is added via cc-option in drivers/firmware/efi/libstub/Makefile. When an unknown flag is added to KBUILD_CFLAGS, clang will noisily warn that it is ignoring the option like above, unlike gcc, who will just error. $ echo "int main() { return 0; }" > tmp.c $ clang -Wno-psabi tmp.c; echo $? warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option] 1 warning generated. 0 $ gcc -Wsometimes-uninitialized tmp.c; echo $? gcc: error: unrecognized command line option ‘-Wsometimes-uninitialized’; did you mean ‘-Wmaybe-uninitialized’? 1 For cc-option to work properly with clang and behave like gcc, -Werror is needed, which was done in commit c3f0d0bc5b01 ("kbuild, LLVMLinux: Add -Werror to cc-option to support clang"). $ clang -Werror -Wno-psabi tmp.c; echo $? error: unknown warning option '-Wno-psabi' [-Werror,-Wunknown-warning-option] 1 As a consequence of this, when an unknown flag is unconditionally added to KBUILD_CFLAGS, it will cause cc-option to always fail and those flags will never get added: $ clang -Werror -Wno-psabi -fno-stack-protector tmp.c; echo $? error: unknown warning option '-Wno-psabi' [-Werror,-Wunknown-warning-option] 1 This can be seen when compiling the whole kernel as some warnings that are normally disabled (see below) show up. The full list of flags missing from drivers/firmware/efi/libstub are the following (gathered from diffing .arm64-stub.o.cmd): -fno-delete-null-pointer-checks -Wno-address-of-packed-member -Wframe-larger-than=2048 -Wno-unused-const-variable -fno-strict-overflow -fno-merge-all-constants -fno-stack-check -Werror=date-time -Werror=incompatible-pointer-types -ffreestanding -fno-stack-protector Use cc-disable-warning so that it gets disabled for GCC and does nothing for Clang. Fixes: ebcc5928c5d9 ("arm64: Silence gcc warnings about arch ABI drift") Link: https://github.com/ClangBuiltLinux/linux/issues/511 Reported-by: Qian Cai <[email protected]> Acked-by: Dave Martin <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-06-12drm/edid: abstract override/firmware EDID retrievalJani Nikula1-8/+17
Abstract the debugfs override and the firmware EDID retrieval function. We'll be needing it in the follow-up. No functional changes. Cc: Daniel Vetter <[email protected]> Cc: Harish Chegondi <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Tested-by: Tested-by: Paul Wise <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-12platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flowVadim Pasternak1-0/+1
Add devm_free_irq() call to mlxreg-hotplug remove() for clean release of devices irq resource. Fix debugobjects warning triggered by rmmod It prevents of use-after-free memory, related to mlxreg_hotplug_work_handler. Issue has been reported as debugobjects warning triggered by 'rmmod mlxtreg-hotplug' flow, while running kernel with CONFIG_DEBUG_OBJECTS* options. [ 2489.623551] ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler+0x0/0x7f0 [mlxreg_hotplug] [ 2489.637097] WARNING: CPU: 5 PID: 3924 at lib/debugobjects.c:328 debug_print_object+0xfe/0x180 [ 2489.637165] RIP: 0010:debug_print_object+0xfe/0x180 ? [ 2489.637214] Call Trace: [ 2489.637225] __debug_check_no_obj_freed+0x25e/0x320 [ 2489.637231] kfree+0x82/0x110 [ 2489.637238] release_nodes+0x33c/0x4e0 [ 2489.637242] ? devres_remove_group+0x1b0/0x1b0 [ 2489.637247] device_release_driver_internal+0x146/0x270 [ 2489.637251] driver_detach+0x73/0xe0 [ 2489.637254] bus_remove_driver+0xa1/0x170 [ 2489.637261] __x64_sys_delete_module+0x29e/0x320 [ 2489.637265] ? __ia32_sys_delete_module+0x320/0x320 [ 2489.637268] ? blkcg_exit_queue+0x20/0x20 [ 2489.637273] ? task_work_run+0x7d/0x100 [ 2489.637278] ? exit_to_usermode_loop+0x5b/0xf0 [ 2489.637281] do_syscall_64+0x73/0x160 [ 2489.637287] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2489.637290] RIP: 0033:0x7f95c3596fd7 The difference in release flow with and with no devm_free_irq is listed below: bus: 'platform': remove driver mlxreg-hotplug mlxreg_hotplug_remove(start) -> devm_free_irq (with new code) mlxreg_hotplug_remove (end) release_nodes (start) mlxreg-hotplug: DEVRES REL devm_hwmon_release (8 bytes) device: 'hwmon3': device_unregister PM: Removing info for No Bus:hwmon3 mlxreg-hotplug: DEVRES REL devm_kzalloc_release (88 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (6 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_irq_release (16 bytes) (no new code) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (1376 bytes) ------------[ cut here ]------------ (no new code): ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler release_nodes(end) driver: 'mlxreg-hotplug': driver_release Fixes: 1f976f6978bf ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox") Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2019-06-12platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registrationVadim Pasternak1-1/+1
Fix the issue found while running kernel with the option CONFIG_DEBUG_TEST_DRIVER_REMOVE. Driver 'mlx-platform' registers 'i2c_mlxcpld' device and then registers few underlying 'i2c-mux-reg' devices: priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr, NULL, 0); ... for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { priv->pdev_mux[i] = platform_device_register_resndata( &mlxplat_dev->dev, "i2c-mux-reg", i, NULL, 0, &mlxplat_mux_data[i], sizeof(mlxplat_mux_data[i])); But actual parent of "i2c-mux-reg" device is priv->pdev_i2c->dev and not mlxplat_dev->dev. Patch fixes parent device parameter in a call to platform_device_register_resndata() for "i2c-mux-reg". It solves the race during initialization flow while 'i2c_mlxcpld.1' is removing after probe, while 'i2c-mux-reg.0' is still in probing flow: 'i2c_mlxcpld.1' flow: probe -> remove -> probe. 'i2c-mux-reg.0' flow: probe -> ... [ 12:621096] Registering platform device 'i2c_mlxcpld.1'. Parent at platform [ 12:621117] device: 'i2c_mlxcpld.1': device_add [ 12:621155] bus: 'platform': add device i2c_mlxcpld.1 [ 12:621384] Registering platform device 'i2c-mux-reg.0'. Parent at mlxplat [ 12:621395] device: 'i2c-mux-reg.0': device_add [ 12:621425] bus: 'platform': add device i2c-mux-reg.0 [ 12:621806] Registering platform device 'i2c-mux-reg.1'. Parent at mlxplat [ 12:621828] device: 'i2c-mux-reg.1': device_add [ 12:621892] bus: 'platform': add device i2c-mux-reg.1 [ 12:621906] bus: 'platform': add driver i2c_mlxcpld [ 12:621996] bus: 'platform': driver_probe_device: matched device i2c_mlxcpld.1 with driver i2c_mlxcpld [ 12:622003] bus: 'platform': really_probe: probing driver i2c_mlxcpld with device i2c_mlxcpld.1 [ 12:622100] i2c_mlxcpld i2c_mlxcpld.1: no default pinctrl state [ 12:622293] device: 'i2c-1': device_add [ 12:627280] bus: 'i2c': add device i2c-1 [ 12:627692] device: 'i2c-1': device_add [ 12.629639] bus: 'platform': add driver i2c-mux-reg [ 12.629718] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.629723] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.629818] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.629981] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral [ 12.629986] platform i2c-mux-reg.0: Added to deferred list [ 12.629992] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg [ 12.629997] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1 [ 12.630091] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state [ 12.630247] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral [ 12.630252] platform i2c-mux-reg.1: Added to deferred list [ 12.640892] devices_kset: Moving i2c-mux-reg.0 to end of list [ 12.640900] platform i2c-mux-reg.0: Retrying from deferred list [ 12.640911] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.640919] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.640999] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.641177] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral [ 12.641187] platform i2c-mux-reg.0: Added to deferred list [ 12.641198] devices_kset: Moving i2c-mux-reg.1 to end of list [ 12.641219] platform i2c-mux-reg.1: Retrying from deferred list [ 12.641237] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg [ 12.641247] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1 [ 12.641331] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state [ 12.641465] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral [ 12.641469] platform i2c-mux-reg.1: Added to deferred list [ 12.646427] device: 'i2c-1': device_add [ 12.646647] bus: 'i2c': add device i2c-1 [ 12.647104] device: 'i2c-1': device_add [ 12.669231] devices_kset: Moving i2c-mux-reg.0 to end of list [ 12.669240] platform i2c-mux-reg.0: Retrying from deferred list [ 12.669258] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.669263] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.669343] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.669585] device: 'i2c-2': device_add [ 12.669795] bus: 'i2c': add device i2c-2 [ 12.670201] device: 'i2c-2': device_add [ 12.671427] i2c i2c-1: Added multiplexed i2c bus 2 [ 12.671514] device: 'i2c-3': device_add [ 12.671724] bus: 'i2c': add device i2c-3 [ 12.672136] device: 'i2c-3': device_add [ 12.673378] i2c i2c-1: Added multiplexed i2c bus 3 [ 12.673472] device: 'i2c-4': device_add [ 12.673676] bus: 'i2c': add device i2c-4 [ 12.674060] device: 'i2c-4': device_add [ 12.675861] i2c i2c-1: Added multiplexed i2c bus 4 [ 12.675941] device: 'i2c-5': device_add [ 12.676150] bus: 'i2c': add device i2c-5 [ 12.676550] device: 'i2c-5': device_add [ 12.678103] i2c i2c-1: Added multiplexed i2c bus 5 [ 12.678193] device: 'i2c-6': device_add [ 12.678395] bus: 'i2c': add device i2c-6 [ 12.678774] device: 'i2c-6': device_add [ 12.679969] i2c i2c-1: Added multiplexed i2c bus 6 [ 12.680065] device: 'i2c-7': device_add [ 12.680275] bus: 'i2c': add device i2c-7 [ 12.680913] device: 'i2c-7': device_add [ 12.682506] i2c i2c-1: Added multiplexed i2c bus 7 [ 12.682600] device: 'i2c-8': device_add [ 12.682808] bus: 'i2c': add device i2c-8 [ 12.683189] device: 'i2c-8': device_add [ 12.683907] device: 'i2c-1': device_unregister [ 12.683945] device: 'i2c-1': device_unregister [ 12.684387] device: 'i2c-1': device_create_release [ 12.684536] bus: 'i2c': remove device i2c-1 [ 12.686019] i2c i2c-8: Failed to create compatibility class link [ 12.686086] ------------[ cut here ]------------ [ 12.686087] can't create symlink to mux device [ 12.686224] Workqueue: events deferred_probe_work_func [ 12.686135] WARNING: CPU: 7 PID: 436 at drivers/i2c/i2c-mux.c:416 i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux] [ 12.686232] RIP: 0010:i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux] [ 0x190/0x190 [i2c_mux] [ 12.686300] ? i2c_mux_alloc+0xac/0x110 [i2c_mux] [ 12.686306] ? i2c_mux_reg_set+0x200/0x200 [i2c_mux_reg] [ 12.686313] i2c_mux_reg_probe+0x22c/0x731 [i2c_mux_reg] [ 12.686322] ? i2c_mux_reg_deselect+0x60/0x60 [i2c_mux_reg] [ 12.686346] platform_drv_probe+0xa8/0x110 [ 12.686351] really_probe+0x185/0x720 [ 12.686358] driver_probe_device+0xdf/0x1f0 ... [ 12.686522] i2c i2c-1: Added multiplexed i2c bus 8 [ 12.686621] device: 'i2c-9': device_add [ 12.686626] kobject_add_internal failed for i2c-9 (error: -2 parent: i2c-1) [ 12.694729] i2c-core: adapter 'i2c-1-mux (chan_id 8)': can't register device (-2) [ 12.705726] i2c i2c-1: failed to add mux-adapter 8 as bus 9 (error=-2) [ 12.714494] device: 'i2c-8': device_unregister [ 12.714537] device: 'i2c-8': device_unregister Fixes: 6613d18e9038 ("platform/x86: mlx-platform: Move module from arch/x86") Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2019-06-12platform/x86: intel-vbtn: Report switch events when event wakes deviceMathew King1-2/+14
When a switch event, such as tablet mode/laptop mode or docked/undocked, wakes a device make sure that the value of the swich is reported. Without when a device is put in tablet mode from laptop mode when it is suspended or vice versa the device will wake up but mode will be incorrect. Tested by suspending a device in laptop mode and putting it in tablet mode, the device resumes and is in tablet mode. When suspending the device in tablet mode and putting it in laptop mode the device resumes and is in laptop mode. Signed-off-by: Mathew King <[email protected]> Reviewed-by: Jett Rink <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2019-06-12platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from ↵Hans de Goede3-1/+10
asus_nb_wmi Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") causes the backlight to be permanently off on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC 1015BX, Asus EeePC 1025C). The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added by that commit is made conditional in this commit and only enabled in the quirk_entry structs in the asus-nb-wmi driver fixing the broken display / backlight on various EeePC laptop models. Cc: João Paulo Rechi Vita <[email protected]> Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2019-06-12x86/resctrl: Prevent NULL pointer dereference when local MBM is disabledPrarit Bhargava1-0/+3
Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in a NULL pointer dereference on systems which do not have local MBM support enabled.. BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2 Workqueue: events mbm_handle_overflow RIP: 0010:mbm_handle_overflow+0x150/0x2b0 Only enter the bandwith update loop if the system has local MBM enabled. Fixes: de73f38f7680 ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth") Signed-off-by: Prarit Bhargava <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Reinette Chatre <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-06-12x86/resctrl: Don't stop walking closids when a locksetup group is foundJames Morse1-1/+6
When a new control group is created __init_one_rdt_domain() walks all the other closids to calculate the sets of used and unused bits. If it discovers a pseudo_locksetup group, it breaks out of the loop. This means any later closid doesn't get its used bits added to used_b. These bits will then get set in unused_b, and added to the new control group's configuration, even if they were marked as exclusive for a later closid. When encountering a pseudo_locksetup group, we should continue. This is because "a resource group enters 'pseudo-locked' mode after the schemata is written while the resource group is in 'pseudo-locksetup' mode." When we find a pseudo_locksetup group, its configuration is expected to be overwritten, we can skip it. Fixes: dfe9674b04ff6 ("x86/intel_rdt: Enable entering of pseudo-locksetup mode") Signed-off-by: James Morse <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Reinette Chatre <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: H Peter Avin <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-06-12iommu/arm-smmu: Avoid constant zero in TLBI writesRobin Murphy1-3/+12
Apparently, some Qualcomm arm64 platforms which appear to expose their SMMU global register space are still, in fact, using a hypervisor to mediate it by trapping and emulating register accesses. Sadly, some deployed versions of said trapping code have bugs wherein they go horribly wrong for stores using r31 (i.e. XZR/WZR) as the source register. While this can be mitigated for GCC today by tweaking the constraints for the implementation of writel_relaxed(), to avoid any potential arms race with future compilers more aggressively optimising register allocation, the simple way is to just remove all the problematic constant zeros. For the write-only TLB operations, the actual value is irrelevant anyway and any old nearby variable will provide a suitable GPR to encode. The one point at which we really do need a zero to clear a context bank happens before any of the TLB maintenance where crashes have been reported, so is apparently not a problem... :/ Reported-by: AngeloGioacchino Del Regno <[email protected]> Tested-by: Marc Gonzalez <[email protected]> Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Marc Gonzalez <[email protected]> Acked-by: Will Deacon <[email protected]> Cc: [email protected] Signed-off-by: Joerg Roedel <[email protected]>
2019-06-12drm/i915/perf: fix whitelist on Gen10+Lionel Landwerlin2-0/+2
Gen10 added an additional NOA_WRITE register (high bits) and we forgot to whitelist it for userspace. Fixes: 95690a02fb5d96 ("drm/i915/perf: enable perf support on CNL") Signed-off-by: Lionel Landwerlin <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit bf210f6c9e6fd8dc0d154ad18f741f20e64a3fce) Signed-off-by: Jani Nikula <[email protected]>
2019-06-12drm/i915/sdvo: Implement proper HDMI audio support for SDVOVille Syrjälä2-11/+50
Our SDVO audio support is pretty bogus. We can't push audio over the SDVO bus, so trying to enable audio in the SDVO control register doesn't do anything. In fact it looks like the SDVO encoder will always mix in the audio coming over HDA, and there's no (at least documented) way to disable that from our side. So HDMI audio does work currently on gen4 but only by luck really. On gen3 it got broken by the referenced commit. And what has always been missing on every platform is the ELD. To pass the ELD to the audio driver we need to write it to magic buffer in the SDVO encoder hardware which then gets pulled out via HDA in the other end. Ie. pretty much the same thing we had for native HDMI before we started to just pass the ELD between the drivers. This sort of explains why we even have that silly hardware buffer with native HDMI. $ cat /proc/asound/card0/eld#1.0 -monitor_present 0 -eld_valid 0 +monitor_present 1 +eld_valid 1 +monitor_name LG TV +connection_type HDMI +... This also fixes our state readout since we can now query the SDVO encoder about the state of the "ELD valid" and "presence detect" bits. As mentioned those don't actually control whether audio gets sent over the HDMI cable, but it's the best we can do. And with the state checker appeased we can re-enable HDMI audio for gen3. Cc: [email protected] Cc: Daniel Vetter <[email protected]> Cc: [email protected] Tested-by: [email protected] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976 Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Imre Deak <[email protected]> (cherry picked from commit dc49a56bd43bb04982e64b44436831da801d0237) Signed-off-by: Jani Nikula <[email protected]>
2019-06-12drm/i915: Fix per-pixel alpha with CCSVille Syrjälä1-4/+8
We forgot to set .has_alpha=true for the A+CCS formats when the code started to consult .has_alpha. This manifests as A+CCS being treated as X+CCS which means no per-pixel alpha blending. Fix the format list appropriately. Cc: [email protected] Cc: Maarten Lankhorst <[email protected]> Cc: Matt Roper <[email protected]> Cc: Heinrich Fink <[email protected]> Reported-by: Heinrich Fink <[email protected]> Tested-by: Heinrich Fink <[email protected]> Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Maarten Lankhorst <[email protected]> (cherry picked from commit 38f300410f3e15b6fec76c8d8baed7111b5ea4e4) Signed-off-by: Jani Nikula <[email protected]>
2019-06-12drm/i915/dmc: protect against reading random memoryLucas De Marchi1-0/+18
While loading the DMC firmware we were double checking the headers made sense, but in no place we checked that we were actually reading memory we were supposed to. This could be wrong in case the firmware file is truncated or malformed. Before this patch: # ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin -rw-r--r-- 1 root root 25716 Feb 1 12:26 icl_dmc_ver1_07.bin # truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin # modprobe i915 # dmesg| grep -i dmc [drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin [drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7) i.e. it loads random data. Now it fails like below: [drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin [drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting. i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management. i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 Before reading any part of the firmware file, validate the input first. Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.") Cc: [email protected] Signed-off-by: Lucas De Marchi <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit bc7b488b1d1c71dc4c5182206911127bc6c410d6) Signed-off-by: Jani Nikula <[email protected]>
2019-06-12drm/i915/dsi: Use a fuzzy check for burst mode clock checkHans de Goede3-1/+13
Prior to this commit we fail to init the DSI panel on the GPD MicroPC: https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/ The problem is intel_dsi_vbt_init() failing with the following error: *ERROR* Burst mode freq is less than computed The pclk in the VBT panel modeline is 70000, together with 24 bpp and 4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000. But the target_burst_mode_freq in the VBT is 418000. This commit works around this problem by adding an intel_fuzzy_clock_check when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to bitrate when that checks succeeds, fixing the panel not working. Cc: [email protected] Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2c1c55252647abd989b94f725b190c700312d053) Signed-off-by: Jani Nikula <[email protected]>
2019-06-11Merge branch 'for-linus' of ↵Linus Torvalds2-2/+27
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace fixes from Eric Biederman: "This is just two very minor fixes: - prevent ptrace from reading unitialized kernel memory found twice by syzkaller - restore a missing smp_rmb in ptrace_may_access and add comment tp it so it is not removed by accident again. Apologies for being a little slow about getting this to you, I am still figuring out how to develop with a little baby in the house" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: restore smp_rmb() in __ptrace_may_access() signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
2019-06-11Merge branch 'stable/for-linus-5.2' of ↵Linus Torvalds1-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "One tiny fix for ARM64 where we could allocate the SWIOTLB twice" * 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: xen/swiotlb: don't initialize swiotlb twice on arm64
2019-06-11Merge tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfioLinus Torvalds3-77/+69
Pull VFIO fixes from Alex Williamson: "Fix mdev device create/remove paths to provide initialized device for parent driver create callback and correct ordering of device removal from bus prior to initiating removal by parent. Also resolve races between parent removal and device create/remove paths (all from Parav Pandit)" * tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio: vfio/mdev: Synchronize device create/remove with parent removal vfio/mdev: Avoid creating sysfs remove file on stale device removal vfio/mdev: Improve the create/remove sequence
2019-06-11Merge tag 'for-5.2-rc4-tag' of ↵Linus Torvalds1-25/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "One regression fix to TRIM ioctl. The range cannot be used as its meaning can be confusing regarding physical and logical addresses. This confusion in code led to potential corruptions when the range overlapped data. The original patch made it to several stable kernels and was promptly reverted, the version for master branch is different due to additional changes but the change is effectively the same" * tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Always trim all unallocated space in btrfs_trim_free_extents
2019-06-11selinux: log raw contexts as untrusted stringsOndrej Mosnacek1-2/+8
These strings may come from untrusted sources (e.g. file xattrs) so they need to be properly escaped. Reproducer: # setenforce 0 # touch /tmp/test # setfattr -n security.selinux -v 'kuřecí řízek' /tmp/test # runcon system_u:system_r:sshd_t:s0 cat /tmp/test (look at the generated AVCs) Actual result: type=AVC [...] trawcon=kuřecí řízek Expected result: type=AVC [...] trawcon=6B75C5996563C3AD20C599C3AD7A656B Fixes: fede148324c3 ("selinux: log invalid contexts in AVCs") Cc: [email protected] # v5.1+ Signed-off-by: Ondrej Mosnacek <[email protected]> Acked-by: Richard Guy Briggs <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2019-06-11ptrace: restore smp_rmb() in __ptrace_may_access()Jann Horn2-0/+19
Restore the read memory barrier in __ptrace_may_access() that was deleted a couple years ago. Also add comments on this barrier and the one it pairs with to explain why they're there (as far as I understand). Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks") Cc: [email protected] Acked-by: Kees Cook <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Eric W. Biederman <[email protected]>
2019-06-11drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after allocShirish S3-3/+11
[What] readptr read always returns zero, since most likely these blocks are either power or clock gated. [How] fetch rptr after amdgpu_ring_alloc() which informs the power management code that the block is about to be used and hence the gating is turned off. Signed-off-by: Louis Li <[email protected]> Signed-off-by: Shirish S <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2019-06-11ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)Rui Nuno Capela1-1/+1
Check for exact and correct return value to snd_i2c_sendbytes call for EWS/DMX 6Fire (snd_ice1712). Fixes a systemic error on every boot starting from kernel 5.1 onwards to snd_ice1712 driver ("cannot send pca") on Terratec EWS/DMX 6Fire PCI soundcards. Check for exact and correct return value to snd_i2c_sendbytes call for EWS/DMX 6Fire (snd_ice1712). Fixes a systemic error on every boot to snd_ice1712 driver ("cannot send pca") on Terratec EWS/DMX 6Fire PCI soundcards. Fixes: c99776cc4018 ("ALSA: ice1712: fix a missing check of snd_i2c_sendbytes") Signed-off-by: Rui Nuno Capela <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-06-11ALSA: oxfw: allow PCM capture for Stanton SCS.1mTakashi Sakamoto1-3/+0
Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear Audio data channels, therefore it allows software to capture PCM substream. However, ALSA oxfw driver doesn't. This commit changes the driver to add one PCM substream for capture direction. Fixes: de5126cc3c0b ("ALSA: oxfw: add stream format quirk for SCS.1 models") Cc: <[email protected]> # v4.5+ Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-06-11ALSA: firewire-motu: fix destruction of data for isochronous resourcesTakashi Sakamoto1-1/+1
The data for isochronous resources is not destroyed in expected place. This commit fixes the bug. Cc: <[email protected]> # v4.12+ Fixes: 9b2bb4f2f4a2 ("ALSA: firewire-motu: add stream management functionality") Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-06-10Revert "usb: mtu3: fix up undefined reference to usb_debug_root"Chunfeng Yun1-1/+2
It's not needed after [1] is applied, because usb_debug_root is created by usb common core but not usbcore now. [1] 812086d362a1 ("USB: move usb debugfs directory creation to the usb common core") Signed-off-by: Chunfeng Yun <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-06-10Merge tag 'for-linus-20190610' of git://git.kernel.dk/linux-blockLinus Torvalds3-36/+6
Pull block cgroup symlink revert from Jens Axboe: "I talked to Tejun about this offline, and he's not a huge fan of the symlink. So let's revert this for now, and Paolo can do this properly for 5.3 instead" * tag 'for-linus-20190610' of git://git.kernel.dk/linux-block: cgroup/bfq: revert bfq.weight symlink change
2019-06-10Merge tag 'regulator-fix-v5.2-rc4' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Just one driver specific fix here, for a boot regression introduced during some modernization work on the tps6507x driver" * tag 'regulator-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps6507x: Fix boot regression due to testing wrong init_data pointer
2019-06-10Merge tag 'spi-fix-v5.2-rc4' of ↵Linus Torvalds3-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small set of fixes here. One core fix for error handling when we fail to set up the hardware before initiating a transfer and another one reverting a change in the core which broke Raspberry Pi in common use cases as part of some optimization work. There's also a couple of driver specific fixes" * tag 'spi-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: abort spi_sync if failed to prepare_transfer_hardware spi: spi-fsl-spi: call spi_finalize_current_message() at the end spi: bitbang: Fix NULL pointer dereference in spi_unregister_master spi: Fix Raspberry Pi breakage
2019-06-10cgroup: Fix css_task_iter_advance_css_set() cset skip conditionTejun Heo1-1/+1
While adding handling for dying task group leaders c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") added an inverted cset skip condition to css_task_iter_advance_css_set(). It should skip cset if it's completely empty but was incorrectly testing for the inverse condition for the dying_tasks list. Fix it. Signed-off-by: Tejun Heo <[email protected]> Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") Reported-by: [email protected]
2019-06-10USB: sisusbvga: Remove unneeded variableHariprasad Kelam1-6/+4
Remove unneeded variable ret in function sisusb_set_default_mode. Change return type of sisusb_set_default_mode from int to void as it never fails. Issue identified by coccicheck Signed-off-by: Hariprasad Kelam <[email protected]> ----- changes in v2: Change return type of sisusb_set_default_mode from int to void as it never fails changes in v3: Update changelog ---- Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-06-10drm/panfrost: Require the simple_ondemand governorEzequiel Garcia1-0/+1
Panfrost depends on the simple_ondemand governor, and therefore it's a required configuration. Select it. Fixes: f3617b449d0b ("drm/panfrost: Select devfreq") Signed-off-by: Ezequiel Garcia <[email protected]> Reviewed-by: Tomeu Vizoso <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-10drm/panfrost: make devfreq optional againNeil Armstrong1-1/+12
Devfreq runtime usage was made mandatory, thus making panfrost fail to probe on Amlogic S912 SoCs missing the "operating-points-v2" property. Make it optional again, leaving PM_DEVFREQ selected by default. Fixes: f3617b449d0b ("drm/panfrost: Select devfreq") Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Ezequiel Garcia <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-10drm/gem_shmem: Use a writecombine mapping for ->vaddrBoris Brezillon1-1/+2
Right now, the BO is mapped as a cached region when ->vmap() is called and the underlying object is not a dmabuf. Doing that makes cache management a bit more complicated (you'd need to call dma_map/unmap_sg() on the ->sgt field everytime the BO is about to be passed to the GPU/CPU), so let's map the BO with writecombine attributes instead (as done in most drivers). Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-10ASoC: Intel: sst: fix kmalloc call with wrong flagsAlex Levin1-2/+2
When calling kmalloc with GFP_KERNEL in case CONFIG_SLOB is unset, kmem_cache_alloc_trace is called. In case CONFIG_TRACING is set, kmem_cache_alloc_trace will ball slab_alloc, which will call slab_pre_alloc_hook which might_sleep_if. The context in which it is called in this case, the intel_sst_interrupt_mrfld, calling a sleeping kmalloc generates a BUG(): Fixes: 972b0d456e64 ("ASoC: Intel: remove GFP_ATOMIC, use GFP_KERNEL") [ 20.250671] BUG: sleeping function called from invalid context at mm/slab.h:422 [ 20.250683] in_atomic(): 1, irqs_disabled(): 1, pid: 1791, name: Chrome_IOThread [ 20.250690] CPU: 0 PID: 1791 Comm: Chrome_IOThread Tainted: G W 4.19.43 #61 [ 20.250693] Hardware name: GOOGLE Kefka, BIOS Google_Kefka.7287.337.0 03/02/2017 [ 20.250697] Call Trace: [ 20.250704] <IRQ> [ 20.250716] dump_stack+0x7e/0xc3 [ 20.250725] ___might_sleep+0x12a/0x140 [ 20.250731] kmem_cache_alloc_trace+0x53/0x1c5 [ 20.250736] ? update_cfs_rq_load_avg+0x17e/0x1aa [ 20.250740] ? cpu_load_update+0x6c/0xc2 [ 20.250746] sst_create_ipc_msg+0x2d/0x88 [ 20.250752] intel_sst_interrupt_mrfld+0x12a/0x22c [ 20.250758] __handle_irq_event_percpu+0x133/0x228 [ 20.250764] handle_irq_event_percpu+0x35/0x7a [ 20.250768] handle_irq_event+0x36/0x55 [ 20.250773] handle_fasteoi_irq+0xab/0x16c [ 20.250779] handle_irq+0xd9/0x11e [ 20.250785] do_IRQ+0x54/0xe0 [ 20.250791] common_interrupt+0xf/0xf [ 20.250795] </IRQ> [ 20.250800] RIP: 0010:__lru_cache_add+0x4e/0xad [ 20.250806] Code: 00 01 48 c7 c7 b8 df 01 00 65 48 03 3c 25 28 f1 00 00 48 8b 48 08 48 89 ca 48 ff ca f6 c1 01 48 0f 44 d0 f0 ff 42 34 0f b6 0f <89> ca fe c2 88 17 48 89 44 cf 08 80 fa 0f 74 0e 48 8b 08 66 85 c9 [ 20.250809] RSP: 0000:ffffa568810bfd98 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd6 [ 20.250814] RAX: ffffd3b904eb1940 RBX: ffffd3b904eb1940 RCX: 0000000000000004 [ 20.250817] RDX: ffffd3b904eb1940 RSI: ffffa10ee5c47450 RDI: ffffa10efba1dfb8 [ 20.250821] RBP: ffffa568810bfda8 R08: ffffa10ef9c741c1 R09: dead000000000100 [ 20.250824] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa10ee8d52a40 [ 20.250827] R13: ffffa10ee8d52000 R14: ffffa10ee5c47450 R15: 800000013ac65067 [ 20.250835] lru_cache_add_active_or_unevictable+0x4e/0xb8 [ 20.250841] handle_mm_fault+0xd98/0x10c4 [ 20.250848] __do_page_fault+0x235/0x42d [ 20.250853] ? page_fault+0x8/0x30 [ 20.250858] do_page_fault+0x3d/0x17a [ 20.250862] ? page_fault+0x8/0x30 [ 20.250866] page_fault+0x1e/0x30 [ 20.250872] RIP: 0033:0x7962fdea9304 [ 20.250875] Code: 0f 11 4c 17 f0 c3 48 3b 15 f1 26 31 00 0f 83 e2 00 00 00 48 39 f7 72 0f 74 12 4c 8d 0c 16 4c 39 cf 0f 82 63 01 00 00 48 89 d1 <f3> a4 c3 80 fa 08 73 12 80 fa 04 73 1e 80 fa 01 77 26 72 05 0f b6 [ 20.250879] RSP: 002b:00007962f4db5468 EFLAGS: 00010206 [ 20.250883] RAX: 00003c8cc9d47008 RBX: 0000000000000000 RCX: 0000000000001b48 [ 20.250886] RDX: 0000000000002b40 RSI: 00003c8cc9551000 RDI: 00003c8cc9d48000 [ 20.250890] RBP: 00007962f4db5820 R08: 0000000000000000 R09: 00003c8cc9552b48 [ 20.250893] R10: 0000562dd1064d30 R11: 00003c8cc825b908 R12: 00003c8cc966d3c0 [ 20.250896] R13: 00003c8cc9e280c0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Alex Levin <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-06-10ASoC: core: Fix deadlock in snd_soc_instantiate_card()Ranjani Sridharan1-2/+2
Move the client_mutex lock to snd_soc_unbind_card() before removing link components. This prevents the deadlock in the error path in snd_soc_instantiate_card(). Fixes: 34ac3c3eb8 (ASoC: core: lock client_mutex while removing link components) Reported-by: kernelci.org bot <[email protected]> Signed-off-by: Ranjani Sridharan <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2019-06-10Merge tag 'usb-serial-5.2-rc5' of ↵Greg Kroah-Hartman3-0/+10
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.2-rc5 Here are some new device ids for option and pl2303. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <[email protected]> * tag 'usb-serial-5.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit 0x1260 and 0x1261 compositions USB: serial: pl2303: add Allied Telesis VT-Kit3 USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
2019-06-10cgroup/bfq: revert bfq.weight symlink changeJens Axboe3-36/+6
There's some discussion on how to do this the best, and Tejun prefers that BFQ just create the file itself instead of having cgroups support a symlink feature. Hence revert commit 54b7b868e826 and 19e9da9e86c4 for 5.2, and this can be done properly for 5.3. Signed-off-by: Jens Axboe <[email protected]>
2019-06-08Linux 5.2-rc4Linus Torvalds1-1/+1
2019-06-08Merge tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-clientLinus Torvalds8-135/+156
Pull ceph fixes from Ilya Dryomov: "A change to call iput() asynchronously to avoid a possible deadlock when iput_final() needs to wait for in-flight I/O (e.g. readahead) and a fixup for a cleanup that went into -rc1" * tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client: ceph: fix error handling in ceph_get_caps() ceph: avoid iput_final() while holding mutex or in dispatch thread ceph: single workqueue for inode related works
2019-06-08Merge tag 'for-linus-5.2b-rc4-tag' of ↵Linus Torvalds1-19/+19
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "Just one fix for the Xen block frontend driver avoiding allocations with order > 0" * tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkfront: switch kcalloc to kvcalloc for large array allocation
2019-06-08Merge tag 's390-5.2-4' of ↵Linus Torvalds2-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - fix stack unwinder: the stack unwinder rework has on off-by-one bug which prevents following stack backchains over more than one context (e.g. irq -> process). - fix address space detection in exception handler: if user space switches to access register mode, which is not supported anymore, the exception handler may resolve to the wrong address space. * tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/unwind: correct stack switching during unwind s390/mm: fix address space detection in exception handling
2019-06-08Merge tag 'mips_fixes_5.2_1' of ↵Linus Torvalds7-13/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: - Declare ginvt() __always_inline due to its use of an argument as an inline asm immediate. - A VDSO build fix following Kbuild changes made this cycle. - A fix for boot failures on txx9 systems following memory initialization changes made this cycle. - Bounds check virt_addr_valid() to prevent it spuriously indicating that bogus addresses are valid, in turn fixing hardened usercopy failures that have been present since v4.12. - Build uImage.gz for pistachio systems by default, since this is the image we need in order to actually boot on a board. - Remove an unused variable in our uprobes code. * tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: uprobes: remove set but not used variable 'epc' MIPS: pistachio: Build uImage.gz by default MIPS: Make virt_addr_valid() return bool MIPS: Bounds check virt_addr_valid MIPS: TXx9: Fix boot crash in free_initmem() MIPS: remove a space after -I to cope with header search paths for VDSO MIPS: mark ginvt() as __always_inline
2019-06-08Merge tag 'spdx-5.2-rc4' of ↵Linus Torvalds3631-32524/+3637
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
2019-06-08Merge tag 'char-misc-5.2-rc4' of ↵Linus Torvalds27-131/+192
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.2-rc4 to resolve a number of reported issues. The most "notable" one here is the kernel headers in proc^Wsysfs fixes. Those changes move the header file info into sysfs and fixes the build issues that you reported. Other than that, a bunch of small habanalabs driver fixes, some fpga driver fixes, and a few other tiny driver fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Read upper bits of trace buffer from RWPHI habanalabs: Fix virtual address access via debugfs for 2MB pages fpga: zynqmp-fpga: Correctly handle error pointer habanalabs: fix bug in checking huge page optimization habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac46861 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
2019-06-08Merge branch 'i2c/for-current' of ↵Linus Torvalds2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has a driver bugfix and a MAINTAINERS fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk
2019-06-08Merge tag 'dmaengine-fix-5.2-rc4' of ↵Linus Torvalds6-49/+100
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: - jz4780 transfer fix for acking descriptors early - fsl-qdma: clean registers on error - dw-axi-dmac: null pointer dereference fix - mediatek-cqdma: fix sleeping in atomic context - tegra210-adma: fix bunch os issues like crashing in driver probe, channel FIFO configuration etc. - sprd: Fixes for possible crash on descriptor status, block length overflow. For 2-stage transfer fix incorrect start, configuration and interrupt handling. * tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: sprd: Add interrupt support for 2-stage transfer dmaengine: sprd: Fix the right place to configure 2-stage transfer dmaengine: sprd: Fix block length overflow dmaengine: sprd: Fix the incorrect start for 2-stage destination channels dmaengine: sprd: Add validation of current descriptor in irq handler dmaengine: sprd: Fix the possible crash when getting descriptor status dmaengine: tegra210-adma: Fix spelling dmaengine: tegra210-adma: Fix channel FIFO configuration dmaengine: tegra210-adma: Fix crash during probe dmaengine: mediatek-cqdma: sleeping in atomic context dmaengine: dw-axi-dmac: fix null dereference when pointer first is null dmaengine: fsl-qdma: Add improvement dmaengine: jz4780: Fix transfers being ACKed too soon
2019-06-08Merge tag 'for-linus-20190608' of git://git.kernel.dk/linux-blockLinus Torvalds20-92/+251
Pull block fixes from Jens Axboe: - Allow symlink from the bfq.weight cgroup parameter to the general weight (Angelo) - Damien is new skd maintainer (Bart) - NVMe pull request from Sagi, with a few small fixes. - Ensure we set DMA segment size properly, dma-debug is now tripping on these (Christoph) - Remove useless debugfs_create() return check (Greg) - Remove redundant unlikely() check on IS_ERR() (Kefeng) - Fixup request freeing on exit (Ming) * tag 'for-linus-20190608' of git://git.kernel.dk/linux-block: block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file block: free sched's request pool in blk_cleanup_queue nvme-rdma: use dynamic dma mapping per command nvme: Fix u32 overflow in the number of namespace list calculation mmc: also set max_segment_size in the device mtip32xx: also set max_segment_size in the device rsxx: don't call dma_set_max_seg_size nvme-pci: don't limit DMA segement size block: Drop unlikely before IS_ERR(_OR_NULL) block: aoe: no need to check return value of debugfs_create functions nvmet: fix data_len to 0 for bdev-backed write_zeroes MAINTAINERS: Hand over skd maintainership nvme-tcp: fix queue mapping when queue count is limited nvme-rdma: fix queue mapping when queue count is limited
2019-06-08Merge tag 'scsi-fixes' of ↵Linus Torvalds2-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two bug fixes, both for fairly serious problems; the UFS one looks like it could be used to exfiltrate data from the kernel, although probably only a privileged user has access to the command management interface and the missing unlock in smartpqi is long standing and probably a little used error path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous() scsi: ufs: Check that space was properly alloced in copy_query_response
2019-06-08Merge tag 'linux-kselftest-5.2-rc4-2' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "This consists of a single fix for a vm test build failure regression when it is built by itself" * tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: vm: Fix test build failure when built by itself
Powered by cgit, Gruvboxed by Blaster4385.