aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-01-10ASoC: Intel: Skylake: Use CGCTL.MISCBDCGE for Phrase detection notificationDharageswari.R2-0/+28
Per HW recommendation, SW shall clear the CGCTL.MISCBDCGE and set it back once data is transferred. So clear this when we get the IPC and track using a driver flag, and set back on closure Signed-off-by: Dharageswari.R <[email protected]> Signed-off-by: Jayachandran B <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ASoC: Intel: Skylake: fix reset controller sequencingJayachandran B3-3/+60
MISCBDCGE is a new register for Misc Backbone clock gate control which is useful to control while resetting the link and ensuring controller is in required state so add API to control it HW recommends that we reset with CGCTL.MISCBDCGE disabled, so add that while doing init chip and reset sequence. Signed-off-by: Jayachandran B <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10Merge branch 'topic/hdac' of ↵Mark Brown4-1/+124
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2016-01-10ASoC: dwc: add quirk to override COMP_PARAM_1 registerMaruthi Srinivas Bayyavarapu2-0/+5
DWC for capture in ACP 2.x IP reports playback and capture capabilities though it supports only capture. Added a quirk to override default value to represent capture capability only. Signed-off-by: Maruthi Bayyavarapu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ASoC: Support registering a DAI dynamicallyMengdong Lin3-0/+46
Define API snd_soc_register_dai() to add a DAI dynamically and create the DAI widgets. Topology can use this API to register DAIs when probing a component with topology info. These DAIs's playback & capture widgets will be freed when the sound card is unregistered and the DAIs will be freed when cleaning up the component. And a dobj is embedded into the struct snd_soc_dai_driver. Topology can use the dobj to find the DAI drivers created by it and free them when the topology component is removed. Signed-off-by: Mengdong Lin <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ASoC: Define soc_add_dai() to add a DAI to a componentMengdong Lin1-36/+52
Define soc_add_dai() as a wrapper to add a single DAI to a component. It can be reused to register a DAI dynamically by topology. Signed-off-by: Mengdong Lin <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ALSA: hdac: add snd_hdac_ext_bus_link_power_up_allVinod Koul2-0/+22
We have an API for powering down all links, we need a similar one for powering up links, so add for power up as well Signed-off-by: Jayachandran B <[email protected]> Signed-off-by: Subhransu S. Prusty <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Reviewed-by: Takashi Iwai <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ALSA: hdac: Increase timeout value for link power checkJayachandran B1-1/+1
HW recommends 180us for worst case values for link power up delay, so change the current delay value from 50 (150us) to 150 (450us) Signed-off-by: Jayachandran B <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Reviewed-by: Takashi Iwai <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ALSA: hdac: couple the hda DMA stream in cleanupJeeja KP1-0/+1
A stream is by default in coupled mode, in DSP operation we move it to decoupled mode. On cleanup HW expects that we leave it back to default state so couple the DMA on cleanup. Signed-off-by: Jeeja KP <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Reviewed-by: Takashi Iwai <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ALSA: hdac: Add support for hda DMA Resume capabilityJeeja KP4-0/+100
Skylake sports new capability of DMA resume, DRSM where we can resume the DMA. This capability is defined by presence of AZX_DRSM_CAP_ID. If this capability is present, we use this capability. So we add: snd_hdac_ext_stream_drsm_enable() - DMA resume caps snd_hdac_ext_stream_set_dpibr() - set the DMA position snd_hdac_ext_stream_set_lpib() - set the lpib Signed-off-by: Jeeja KP <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Reviewed-by: Takashi Iwai <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ASoC: pcm1792a: Rename pcm1792a to pcm179xMichael Trimarchi5-6/+6
pcm1792a is compatible with pcm1795 and pcm1796 so it's better to have them under the common name pcm179x Signed-off-by: Michael Trimarchi <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ASoC: pcm1792a: Rename internal data and function to pcm179xMichael Trimarchi2-82/+82
Signed-off-by: Michael Trimarchi <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-10ASoC: rockchip: i2s: Add SNDRV_PCM_FMTBIT_S32_LE supportMichael Trimarchi1-2/+7
Signed-off-by: Michael Trimarchi <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-08ASoC: compress: Fix compress device direction checkVinod Koul1-3/+20
The detection of direction for compress was only taking into account codec capabilities and not CPU ones. Fix this by checking the CPU side capabilities as well Cc: <[email protected]> Tested-by: Ashish Panwar <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-08ASoC: hdac_hdmi: Use list to add pins and convertersSubhransu S. Prusty1-48/+106
Future platforms may have a different set of pins/converters. So use lists to add pins and converters based on enumeration. Also it may be required to connect any converter to any pin dynamically as per different use cases (for example DP is connected to pin 6 on skylake board). So this will help in dynamically select and route. Fix the dai map as well to use the pin/cvt from list. Not enabling all dai maps for now. Signed-off-by: Subhransu S. Prusty <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-08ASoC: wm8960: boost switch should be closed when using L/RINPUT1Zidan Wang1-6/+6
L/RINPUT1 can line to Left/Right Boost Mixer through boost switch. If boost switch is open, there will be no voice when using L/RINPUT1. Signed-off-by: Zidan Wang <[email protected]> Acked-by: Charles Keepax <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-08ASoC: wm8960: add DAC mono mix kcontrolZidan Wang1-0/+3
In normal operation, the left and right channel digital audio data is converted to analogue in two separate DACs. There is a mono-mix mode where the two audio channels are mixed together digitally and then converted to analogue using only one DAC, while the other DAC is switched off. The mono-mix signal can be selected to appear on both analogue output channels. The mono mix is automatically attenuated by 6dB to prevent clipping. Signed-off-by: Zidan Wang <[email protected]> Acked-by: Charles Keepax <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-08ASoC: hdac_hdmi: Fix to warn instead of err for no connected nidsSubhransu S. Prusty1-4/+6
It is possible that some pin widget may return with no converter connected. So don't throw error if none are found to be connected. Instead print a warning and continue. Signed-off-by: Subhransu S. Prusty <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-06Merge branch 'for-linus' into for-nextTakashi Iwai152-858/+1609
Conflicts: drivers/gpu/drm/i915/intel_display.c sound/soc/intel/skylake/skl.h
2016-01-06Merge tag 'asoc-fix-v4.4-rc8' of ↵Takashi Iwai152-857/+1608
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last minute fixes for v4.4 A few final fixes for v4.4, the main one being the two patches to the new Sky Lake drivers which fix a previous incorrect fix that went in during an earlier -rc.
2016-01-06ASoC: wm_adsp: Pull data through compressed readCharles Keepax3-0/+141
Data is read in blocks of up to one fragment is size from the circular buffer on the DSP and is re-packed to remove the padding byte that exists in the DSP memory map. Signed-off-by: Charles Keepax <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-06ASoC: wm_adsp: Add a handler for the compressed IRQCharles Keepax3-0/+218
Here support is added for responding to DSP IRQs that are used to indicate data being available on the DSP. The idea is that we check the amount of data available upon receipt of an IRQ and on subsequent calls to the pointer callback we recheck once less than one fragment is available (to avoid excessive SPI traffic), if there is truely less than one fragment available we ack the last IRQ and wait for a new one. Signed-off-by: Charles Keepax <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-06ASoC: wm5110: Fix PGA clear when disabling DRECharles Keepax1-5/+3
We don't want to use a bypassed write in wm5110_clear_pga_volume, we might disable the DRE whilst the CODEC is powered down. A normal regmap_write will always go to the hardware (when not on cache_only) even if the written value matches the cache. As using a normal write will still achieve the desired behaviour of bring the cache and hardware in sync, this patch updates the function to use a normal write, which avoids issues when the CODEC is powered down. Signed-off-by: Charles Keepax <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2016-01-06ASoC: rsnd: precedence error in rsnd_ssiu_init()Dan Carpenter1-1/+1
The bitwise OR has higher precedence than ?: so the val2 was always set to 0x2. Fixes: b4c83b171557 ('ASoC: rsnd: add Multi channel support') Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-06Merge branch 'for-linus' into for-nextTakashi Iwai1-15/+86
2016-01-06ALSA: emux: constify nrpn_conv_table structuresJulia Lawall1-4/+5
The nrpn_conv_table structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2016-01-06ALSA: dice: expand timeout to wait for Dice notificationTakashi Sakamoto1-1/+1
Some users have reported that their Dice based models generate ETIMEDOUT when starting PCM playback. It means that current timeout (=100msec) is not enough for their models to transfer notifications. This commit expands the timeout up to 2 sec. As a result, in a worst case, any operations to start AMDTP streams takes 2 sec or more. Then, in userspace, snd_pcm_hw_params(), snd_pcm_prepare(), snd_pcm_recover(), snd_rawmidi_open(), snd_seq_connect_from() and snd_seq_connect_to() may take the time. Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2016-01-06ALSA: dice: purge transaction initialization at timeout of Dice notificationTakashi Sakamoto1-23/+8
In previous commit, card registration is processed under situation with few bus reset. There's no need to add a workaround of transaction re-initialization at timeout. This commit purges the re-initialization. Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2016-01-06ALSA: dice: postpone card registrationTakashi Sakamoto2-45/+117
Some models based on ASIC for Dice II series (STD, CP) change their hardware configurations after appearing on IEEE 1394 bus. This is due to interactions of boot loader (RedBoot), firmwares (eCos) and vendor's configurations. This causes current ALSA dice driver to get wrong information about the hardware's capability because its probe function runs just after detecting unit of the model. As long as I investigated, it takes a bit time (less than 1 second) to load the firmware after bootstrap. Just after loaded, the driver can get information about the unit. Then the hardware is initialized according to vendor's configurations. After, the got information becomes wrong. Between bootstrap, firmware loading and post configuration, some bus resets are observed. This commit offloads most processing of probe function into workqueue and schedules the workqueue after successive bus resets. This has an effect to get correct hardware information and avoid involvement to bus reset storm. For code simplicity, this change effects all of Dice-based models, i.e. Dice II, Dice Jr., Dice Mini and Dice III. I use a loose strategy to manage a race condition between the work and the bus reset. This is due to a specification of dice transaction. When bus reset occurs, registered address for the transaction is cleared. Drivers must re-register their own address again. While, this operation is required for the work because the work includes to wait for the transaction. This commit uses no lock primitives for the race condition. Instead, checking 'registered' member of 'struct snd_dice' avoid executing the work again. If sound card is not registered, the work can be scheduled again by bus reset handler. When .remove callback is executed, the sound card is going to be released. The work should not be pending or executed in the releasing. This commit uses cancel_delayed_work_sync() in .remove callback and wait till the pending work finished. After .remove callback, .update callback is not executed, therefore no works are scheduled again. Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2016-01-06ALSA: dice: split subaddress check from category checkTakashi Sakamoto2-84/+78
Before allocating an instance of sound card, ALSA dice driver checks chip_ID_hi in Bus information block of Config ROM, then also checks subaddresses. The former operation reads cache of Config ROM in Linux FireWire subsystem, while the latter operation sends read transaction. The latter can be merged into initialization of transaction system. This commit splits these two operations to reduce needless transactions in probe processing. Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2016-01-05Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown3-1/+8
2016-01-05Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown2-0/+8
2016-01-05Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown1-1/+1
2016-01-05Merge remote-tracking branch 'asoc/fix/arizona' into asoc-linusMark Brown1-1/+1
2016-01-05ASoC: hdac_hdmi: Fix to check num nodes correctlySubhransu S. Prusty1-1/+1
commit 3c83ac23253c ("ASoC: hdac_hdmi: check error return") fixes the static checker warning reported by Dan Carpenter: sound/soc/codecs/hdac_hdmi.c:416 hdac_hdmi_parse_and_map_nid() warn: unsigned 'hdac->num_nodes' is never less than zero. But it doesn't fix the issue completely. It's also a failure if no sub nodes found for an afg node. So modify the return condition appropriately. Signed-off-by: Subhransu S. Prusty <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: da7218: Correct BCLK inversion for DSP DAI format modeAdam Thomson1-10/+37
By default the device latches data on the falling edge of the BCLK in DSP mode, whereas the expectation for normal BCLK is to latch on the rising edge. This updates the driver to invert the BCLK configuration for DSP mode, to align with expected behaviour. Signed-off-by: Adam Thomson <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05Merge branch 'fix/intel' of ↵Mark Brown1407-12726/+17991
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2016-01-05ASoC: pcm: allow delayed suspending request by usersSanyog Kale1-8/+20
If a device would like to use delayed suspending then PM recommendation is to set ‘power.use_autosuspend’ flag. To allow users to do so we need to change runtime calls in core to use autosuspend counterparts. For user who do not wish to use delayed suspend not setting the device's ‘power.use_autosuspend’ flag will result in non-delayed suspend even with these APIs which incidentally is also the default behaviour, so only users will be impacted who opt in for this. Signed-off-by: Sanyog Kale <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: da7219: Correct BCLK inversion for DSP DAI format modeAdam Thomson1-11/+37
By default the device latches data on the falling edge of the BCLK in DSP mode, whereas the expectation for normal BCLK is to latch on the rising edge. This updates the driver to invert the BCLK configuration for DSP mode, to align with expected behaviour. Signed-off-by: Adam Thomson <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: fsl_asrc: sound is wrong after suspend/resumeZidan Wang2-0/+14
The register ASRCFG is volatile, but some bits need to be recovered after suspend/resume. Signed-off-by: Zidan Wang <[email protected]> Acked-by: Nicolin Chen <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: Intel: Atom: Add support for HP ElitePad 1000 G2Jorge Fernandez Monteagudo3-1/+11
The BIOS for the HP ElitePad 1000 G2 uses an unexpected HID, (INTCCFFD), add it to the white list of knowns HIDs. Signed-off-by: Jorge Fernandez Monteagudo <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: Intel: Atom: add support for RT5642Pierre-Louis Bossart2-1/+3
The machine driver is not loaded when the BIOS uses the 10EC5642 _HID. Add it to the white list of known _HIDs, codec_name is already taken care of by previous commit Tested on Asus T100TAF. Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: Intel: bytcr_rt5640: fixup DAI codec_name with HIDPierre-Louis Bossart2-5/+22
Codec name is hard-coded in machine driver, pass information from actual ACPI HID to help support BIOS variations Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: Intel: add bytct-rt5651 machine driverPierre-Louis Bossart4-0/+349
based on bytcr-rt5640 with changes only on codec side Quirk logic is kept as placeholder. Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: Intel: fix ACPI probe regression with Atom DPCM driverPierre-Louis Bossart1-0/+5
The commit 95f098014815b330838b1173d3d7bcea3b481242 "ASoC: Intel: Move apci find machine routines" introduced a regression in ACPI probe of the DPCM driver. Fix by conditionally compiling sst-acpi when the DPCM driver is not selected Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: Intel: bytcr-rt5640: enable ASRCPierre-Louis Bossart1-0/+5
Sound is noisy when using BCLK as reference, enable ASRC in rt5640 codec Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05Merge branch 'topic/rt5640' of ↵Mark Brown2-0/+119
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2016-01-05ASoC: rt5640: add ASRC supportJack Yu2-0/+119
Signed-off-by: Jack Yu <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: Intel: Skylake: Fix the memory leakVinod Koul3-0/+8
This provide the fix for firmware memory by freeing the pointer in driver remove where it is safe to do so Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2016-01-05ASoC: Intel: Skylake: Revert previous broken fix memory leak fixVinod Koul1-1/+0
This reverts commit 87b5ed8ecb9fe05a696e1c0b53c7a49ea66432c1 ("ASoC: Intel: Skylake: fix memory leak") as it causes regression on Skylake devices The SKL drivers can be deferred probe. The topology file based widgets can have references to topology file so this can't be freed until card is fully created, so revert this patch for now [ 66.682767] BUG: unable to handle kernel paging request at ffffc900001363fc [ 66.690735] IP: [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.696509] PGD 16e035067 PUD 16e036067 PMD 16e038067 PTE 0 [ 66.702925] Oops: 0000 [#1] PREEMPT SMP [ 66.768390] CPU: 3 PID: 57 Comm: kworker/u16:3 Tainted: G O 4.4.0-rc7-skl #62 [ 66.778869] Hardware name: Intel Corporation Skylake Client platform [ 66.793201] Workqueue: deferwq deferred_probe_work_func [ 66.799173] task: ffff88008b700f40 ti: ffff88008b704000 task.ti: ffff88008b704000 [ 66.807692] RIP: 0010:[<ffffffff806c94dd>] [<ffffffff806c94dd>] strnlen+0xd/0x40 [ 66.816243] RSP: 0018:ffff88008b707878 EFLAGS: 00010286 [ 66.822293] RAX: ffffffff80e60a82 RBX: 000000000000000e RCX: fffffffffffffffe [ 66.830406] RDX: ffffc900001363fc RSI: ffffffffffffffff RDI: ffffc900001363fc [ 66.838520] RBP: ffff88008b707878 R08: 000000000000ffff R09: 000000000000ffff [ 66.846649] R10: 0000000000000001 R11: ffffffffa01c6368 R12: ffffc900001363fc [ 66.854765] R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 [ 66.862910] FS: 0000000000000000(0000) GS:ffff88016ecc0000(0000) knlGS:0000000000000000 [ 66.872150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.878696] CR2: ffffc900001363fc CR3: 0000000002c09000 CR4: 00000000003406e0 [ 66.886820] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.894938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.903052] Stack: [ 66.905346] ffff88008b7078b0 ffffffff806cb1db 000000000000000e 0000000000000000 [ 66.913854] ffff88008b707928 ffffffffa00d1050 ffffffffa00d104e ffff88008b707918 [ 66.922353] ffffffff806ccbd6 ffff88008b707948 0000000000000046 ffff88008b707940 [ 66.930855] Call Trace: [ 66.933646] [<ffffffff806cb1db>] string.isra.4+0x3b/0xd0 [ 66.939793] [<ffffffff806ccbd6>] vsnprintf+0x116/0x540 [ 66.945742] [<ffffffff806d02f0>] kvasprintf+0x40/0x80 [ 66.951591] [<ffffffff806d0370>] kasprintf+0x40/0x50 [ 66.957359] [<ffffffffa00c085f>] dapm_create_or_share_kcontrol+0x1cf/0x300 [snd_soc_core] [ 66.966771] [<ffffffff8057dd1e>] ? __kmalloc+0x16e/0x2a0 [ 66.972931] [<ffffffffa00c0dab>] snd_soc_dapm_new_widgets+0x41b/0x4b0 [snd_soc_core] [ 66.981857] [<ffffffffa00be8c0>] ? snd_soc_dapm_add_routes+0xb0/0xd0 [snd_soc_core] [ 67.007828] [<ffffffffa00b92ed>] soc_probe_component+0x23d/0x360 [snd_soc_core] [ 67.016244] [<ffffffff80b14e69>] ? mutex_unlock+0x9/0x10 [ 67.022405] [<ffffffffa00ba02f>] snd_soc_instantiate_card+0x47f/0xd10 [snd_soc_core] [ 67.031329] [<ffffffff8049eeb2>] ? debug_mutex_init+0x32/0x40 [ 67.037973] [<ffffffffa00baa92>] snd_soc_register_card+0x1d2/0x2b0 [snd_soc_core] [ 67.046619] [<ffffffffa00c8b54>] devm_snd_soc_register_card+0x44/0x80 [snd_soc_core] [ 67.055539] [<ffffffffa01c303b>] skylake_audio_probe+0x1b/0x20 [snd_soc_skl_rt286] [ 67.064292] [<ffffffff808aa887>] platform_drv_probe+0x37/0x90 Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Mark Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.