aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-12-26IB/rds: suppress incompatible protocol when version is knownMarciniszyn, Mike1-6/+5
Add an else to only print the incompatible protocol message when version hasn't been established. Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-26IB/rds: Correct ib_api use with gs_dma_address/sg_dma_lenMarciniszyn, Mike1-3/+6
0b088e00 ("RDS: Use page_remainder_alloc() for recv bufs") added uses of sg_dma_len() and sg_dma_address(). This makes RDS DOA with the qib driver. IB ulps should use ib_sg_dma_len() and ib_sg_dma_address respectively since some HCAs overload ib_sg_dma* operations. Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-26net/vxlan: Use the underlying device index when joining/leaving multicast groupsYan Burman1-2/+4
The socket calls from vxlan to join/leave multicast group aren't using the index of the underlying device, as a result the stack uses the first interface that is up. This results in vxlan being non functional over a device which isn't the 1st to be up. Fix this by providing the iflink field to the vxlan instance to the multicast calls. Signed-off-by: Yan Burman <[email protected]> Acked-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-26tcp: should drop incoming frames without ACK flag setEric Dumazet1-4/+10
In commit 96e0bf4b5193d (tcp: Discard segments that ack data not yet sent) John Dykstra enforced a check against ack sequences. In commit 354e4aa391ed5 (tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation) I added more safety tests. But we missed fact that these tests are not performed if ACK bit is not set. RFC 793 3.9 mandates TCP should drop a frame without ACK flag set. " fifth check the ACK field, if the ACK bit is off drop the segment and return" Not doing so permits an attacker to only guess an acceptable sequence number, evading stronger checks. Many thanks to Zhiyun Qian for bringing this issue to our attention. See : http://web.eecs.umich.edu/~zhiyunq/pub/ccs12_TCP_sequence_number_inference.pdf Reported-by: Zhiyun Qian <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Nandita Dukkipati <[email protected]> Cc: Neal Cardwell <[email protected]> Cc: John Dykstra <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-26mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDEDChristoffer Dall1-1/+7
Unfortunately with !CONFIG_PAGEFLAGS_EXTENDED, (!PageHead) is false, and (PageHead) is true, for tail pages. If this is indeed the intended behavior, which I doubt because it breaks cache cleaning on some ARM systems, then the nomenclature is highly problematic. This patch makes sure PageHead is only true for head pages and PageTail is only true for tail pages, and neither is true for non-compound pages. [ This buglet seems ancient - seems to have been introduced back in Apr 2008 in commit 6a1e7f777f61: "pageflags: convert to the use of new macros". And the reason nobody noticed is because the PageHead() tests are almost all about just sanity-checking, and only used on pages that are actual page heads. The fact that the old code returned true for tail pages too was thus not really noticeable. - Linus ] Signed-off-by: Christoffer Dall <[email protected]> Acked-by: Andrea Arcangeli <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Will Deacon <[email protected]> Cc: Steve Capper <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: [email protected] # 2.6.26+ Signed-off-by: Linus Torvalds <[email protected]>
2012-12-26netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabledLi Zefan1-1/+1
sock->sk_cgrp_prioidx won't be used at all if CONFIG_NETPRIO_CGROUP=n. Signed-off-by: Li Zefan <[email protected]> Acked-by: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-26cpts: fix a run time warn_on.Richard Cochran1-1/+1
This patch fixes a warning in clk_enable by calling clk_prepare_enable instead. Signed-off-by: Richard Cochran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-26cpts: fix build error by removing useless code.Richard Cochran2-2/+0
The cpts driver tries to obtain the input clock frequency by calling the clock's internal 'recalc' method. Since <plat/clock.h> has been removed, this code can no longer compile. However, the driver never makes use of the frequency value, so this patch fixes the issue by removing the offending code altogether. Signed-off-by: Richard Cochran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-26batman-adv: fix random jitter calculationAkinobu Mita1-1/+1
batadv_iv_ogm_emit_send_time() attempts to calculates a random integer in the range of 'orig_interval +- BATADV_JITTER' by the below lines. msecs = atomic_read(&bat_priv->orig_interval) - BATADV_JITTER; msecs += (random32() % 2 * BATADV_JITTER); But it actually gets 'orig_interval' or 'orig_interval - BATADV_JITTER' because '%' and '*' have same precedence and associativity is left-to-right. This adds the parentheses at the appropriate position so that it matches original intension. Signed-off-by: Akinobu Mita <[email protected]> Acked-by: Antonio Quartulli <[email protected]> Cc: Marek Lindner <[email protected]> Cc: Simon Wunderlich <[email protected]> Cc: Antonio Quartulli <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2012-12-26PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHzAndy Lutomirski2-2/+6
Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Chris Ball <[email protected]> CC: Manoj Iyer <[email protected]> CC: [email protected]
2012-12-26PCI/PM: Do not suspend port if any subordinate device needs PME pollingHuang Ying1-1/+19
Ulrich reported that his USB3 cardreader does not work reliably when connected to the USB3 port. It turns out that USB3 controller failed to awaken when plugging in the USB3 cardreader. Further experiments found that the USB3 host controller can only be awakened via polling, not via PME interrupt. But if the PCIe port to which the USB3 host controller is connected is suspended, we cannot poll the controller because its config space is not accessible when the PCIe port is in a low power state. To solve the issue, the PCIe port will not be suspended if any subordinate device needs PME polling. [bhelgaas: use bool consistently rather than mixing int/bool] Reference: http://lkml.kernel.org/r/[email protected] Reported-by: Ulrich Eckhardt <[email protected]> Tested-by: Sarah Sharp <[email protected]> Signed-off-by: Huang Ying <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> CC: [email protected] # v3.6+
2012-12-26PCI: Add PCIe Link Capability link speed and width namesBjorn Helgaas1-0/+2
Add standard #defines for the Supported Link Speeds field in the PCIe Link Capabilities register. Note that prior to PCIe spec r3.0, these encodings were defined: 0001b 2.5GT/s Link speed supported 0010b 5.0GT/s and 2.5GT/s Link speed supported Starting with spec r3.0, these encodings refer to bits 0 and 1 in the Supported Link Speeds Vector in the Link Capabilities 2 register, and bits 0 and 1 there mean 2.5 GT/s and 5.0 GT/s, respectively. Therefore, code that followed r2.0 and interpreted 0x1 as 2.5GT/s and 0x2 as 5.0GT/s will continue to work, and we can identify a device using the new encodings because it will have a non-zero Link Capabilities 2 register. Signed-off-by: Bjorn Helgaas <[email protected]>
2012-12-26PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)Myron Stowe1-1/+2
Commit 284f5f9 was intended to disable the "only_one_child()" optimization on Stratus ftServer systems, but its DMI check is wrong. It looks for DMI_SYS_VENDOR that contains "ftServer", when it should look for DMI_SYS_VENDOR containing "Stratus" and DMI_PRODUCT_NAME containing "ftServer". Tested on Stratus ftServer 6400. Reported-by: Fadeeva Marina <[email protected]> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Signed-off-by: Myron Stowe <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> CC: [email protected] # v3.5+
2012-12-26PCI: Remove spurious error for sriov_numvfs store and simplify flowBjorn Helgaas1-51/+34
If we request "num_vfs" and the driver's sriov_configure() method enables exactly that number ("num_vfs_enabled"), we complain "Invalid value for number of VFs to enable" and return an error. We should silently return success instead. Also, use kstrtou16() since numVFs is defined to be a 16-bit field and rework to simplify control flow. Reported-by: Greg Rose <[email protected]> Reference: http://lkml.kernel.org/r/20121214101911.00002f59@unknown Signed-off-by: Bjorn Helgaas <[email protected]> Tested-by: Donald Dutile <[email protected]>
2012-12-25f2fs: Don't assign e_id in f2fs_acl_from_diskEric W. Biederman1-1/+0
With user namespaces enabled building f2fs fails with: CC fs/f2fs/acl.o fs/f2fs/acl.c: In function ‘f2fs_acl_from_disk’: fs/f2fs/acl.c:85:21: error: ‘struct posix_acl_entry’ has no member named ‘e_id’ make[2]: *** [fs/f2fs/acl.o] Error 1 make[2]: Target `__build' not remade because of errors. e_id is a backwards compatibility field only used for file systems that haven't been converted to use kuids and kgids. When the posix acl tag field is neither ACL_USER nor ACL_GROUP assigning e_id is unnecessary. Remove the assignment so f2fs will build with user namespaces enabled. Cc: Namjae Jeon <[email protected]> Cc: Amit Sahrawat <[email protected]> Acked-by: Jaegeuk Kim <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]>
2012-12-25proc: Allow proc_free_inum to be called from any contextEric W. Biederman1-6/+7
While testing the pid namespace code I hit this nasty warning. [ 176.262617] ------------[ cut here ]------------ [ 176.263388] WARNING: at /home/eric/projects/linux/linux-userns-devel/kernel/softirq.c:160 local_bh_enable_ip+0x7a/0xa0() [ 176.265145] Hardware name: Bochs [ 176.265677] Modules linked in: [ 176.266341] Pid: 742, comm: bash Not tainted 3.7.0userns+ #18 [ 176.266564] Call Trace: [ 176.266564] [<ffffffff810a539f>] warn_slowpath_common+0x7f/0xc0 [ 176.266564] [<ffffffff810a53fa>] warn_slowpath_null+0x1a/0x20 [ 176.266564] [<ffffffff810ad9ea>] local_bh_enable_ip+0x7a/0xa0 [ 176.266564] [<ffffffff819308c9>] _raw_spin_unlock_bh+0x19/0x20 [ 176.266564] [<ffffffff8123dbda>] proc_free_inum+0x3a/0x50 [ 176.266564] [<ffffffff8111d0dc>] free_pid_ns+0x1c/0x80 [ 176.266564] [<ffffffff8111d195>] put_pid_ns+0x35/0x50 [ 176.266564] [<ffffffff810c608a>] put_pid+0x4a/0x60 [ 176.266564] [<ffffffff8146b177>] tty_ioctl+0x717/0xc10 [ 176.266564] [<ffffffff810aa4d5>] ? wait_consider_task+0x855/0xb90 [ 176.266564] [<ffffffff81086bf9>] ? default_spin_lock_flags+0x9/0x10 [ 176.266564] [<ffffffff810cab0a>] ? remove_wait_queue+0x5a/0x70 [ 176.266564] [<ffffffff811e37e8>] do_vfs_ioctl+0x98/0x550 [ 176.266564] [<ffffffff810b8a0f>] ? recalc_sigpending+0x1f/0x60 [ 176.266564] [<ffffffff810b9127>] ? __set_task_blocked+0x37/0x80 [ 176.266564] [<ffffffff810ab95b>] ? sys_wait4+0xab/0xf0 [ 176.266564] [<ffffffff811e3d31>] sys_ioctl+0x91/0xb0 [ 176.266564] [<ffffffff810a95f0>] ? task_stopped_code+0x50/0x50 [ 176.266564] [<ffffffff81939199>] system_call_fastpath+0x16/0x1b [ 176.266564] ---[ end trace 387af88219ad6143 ]--- It turns out that spin_unlock_bh(proc_inum_lock) is not safe when put_pid is called with another spinlock held and irqs disabled. For now take the easy path and use spin_lock_irqsave(proc_inum_lock) in proc_free_inum and spin_loc_irq in proc_alloc_inum(proc_inum_lock). Signed-off-by: "Eric W. Biederman" <[email protected]>
2012-12-25pidns: Stop pid allocation when init diesEric W. Biederman4-4/+20
Oleg pointed out that in a pid namespace the sequence. - pid 1 becomes a zombie - setns(thepidns), fork,... - reaping pid 1. - The injected processes exiting. Can lead to processes attempting access their child reaper and instead following a stale pointer. That waitpid for init can return before all of the processes in the pid namespace have exited is also unfortunate. Avoid these problems by disabling the allocation of new pids in a pid namespace when init dies, instead of when the last process in a pid namespace is reaped. Pointed-out-by: Oleg Nesterov <[email protected]> Reviewed-by: Oleg Nesterov <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]>
2012-12-25ext4: do not try to write superblock on ro remount w/o journalMichael Tokarev1-1/+1
When a journal-less ext4 filesystem is mounted on a read-only block device (blockdev --setro will do), each remount (for other, unrelated, flags, like suid=>nosuid etc) results in a series of scary messages from kernel telling about I/O errors on the device. This is becauese of the following code ext4_remount(): if (sbi->s_journal == NULL) ext4_commit_super(sb, 1); at the end of remount procedure, which forces writing (flushing) of a superblock regardless whenever it is dirty or not, if the filesystem is readonly or not, and whenever the device itself is readonly or not. We only need call ext4_commit_super when the file system had been previously mounted read/write. Thanks to Eric Sandeen for help in diagnosing this issue. Signed-off-By: Michael Tokarev <[email protected]> Signed-off-by: "Theodore Ts'o" <[email protected]> Cc: [email protected]
2012-12-25ext4: include journal blocks in df overhead calcsEric Sandeen1-0/+4
To more accurately calculate overhead for "bsd" style df reporting, we should count the journal blocks as overhead as well. Signed-off-by: Eric Sandeen <[email protected]> Signed-off-by: "Theodore Ts'o" <[email protected]> Tested-by: Eric Whitney <[email protected]>
2012-12-25ext4: remove unaligned AIO warning printkEric Sandeen1-8/+0
Although I put this in, I now think it was a bad decision. For most users, there is very little to be done in this case. They get the message, once per day, with no real context or proposed action. TBH, it generates support calls when it probably does not need to; the message sounds more dire than the situation really is. Just nuke it. Normal investigation via blktrace or whatnot can reveal poor IO patterns if bad performance is encountered. Signed-off-by: Eric Sandeen <[email protected]> Signed-off-by: "Theodore Ts'o" <[email protected]>
2012-12-25ext4: fix an incorrect comment about i_mutexAndy Lutomirski1-2/+0
i_mutex is not held when ->sync_file is called. Reviewed-by: Jan Kara <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: "Theodore Ts'o" <[email protected]>
2012-12-25ext4: fix deadlock in journal_unmap_buffer()Jan Kara3-25/+86
We cannot wait for transaction commit in journal_unmap_buffer() because we hold page lock which ranks below transaction start. We solve the issue by bailing out of journal_unmap_buffer() and jbd2_journal_invalidatepage() with -EBUSY. Caller is then responsible for waiting for transaction commit to finish and try invalidation again. Since the issue can happen only for page stradding i_size, it is simple enough to manually call jbd2_journal_invalidatepage() for such page from ext4_setattr(), check the return value and wait if necessary. Signed-off-by: Jan Kara <[email protected]> Signed-off-by: "Theodore Ts'o" <[email protected]>
2012-12-25ext4: split off ext4_journalled_invalidatepage()Jan Kara2-8/+29
In data=journal mode we don't need delalloc or DIO handling in invalidatepage and similarly in other modes we don't need the journal handling. So split invalidatepage implementations. Signed-off-by: Jan Kara <[email protected]> Signed-off-by: "Theodore Ts'o" <[email protected]>
2012-12-24pidns: Outlaw thread creation after unshare(CLONE_NEWPID)Eric W. Biederman1-0/+8
The sequence: unshare(CLONE_NEWPID) clone(CLONE_THREAD|CLONE_SIGHAND|CLONE_VM) Creates a new process in the new pid namespace without setting pid_ns->child_reaper. After forking this results in a NULL pointer dereference. Avoid this and other nonsense scenarios that can show up after creating a new pid namespace with unshare by adding a new check in copy_prodcess. Pointed-out-by: Oleg Nesterov <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]>
2012-12-24arp: fix a regression in arp_solicit()Cong Wang1-3/+3
Sedat reported the following commit caused a regression: commit 9650388b5c56578fdccc79c57a8c82fb92b8e7f1 Author: Eric Dumazet <[email protected]> Date: Fri Dec 21 07:32:10 2012 +0000 ipv4: arp: fix a lockdep splat in arp_solicit This is due to the 6th parameter of arp_send() needs to be NULL for the broadcast case, the above commit changed it to an all-zero array by mistake. Reported-by: Sedat Dilek <[email protected]> Tested-by: Sedat Dilek <[email protected]> Cc: Sedat Dilek <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: David S. Miller <[email protected]> Cc: Julian Anastasov <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-23Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds54-247/+241
Pull i2c __dev* attribute removal from Wolfram Sang: "The squashed patches from Bill to get rid of the __dev* annotations in the i2c subsystem. I couldn't include it in my previous pull request due to some dependency with the mfd subsystem. I had this patch in linux-next for two days before rc1 and nothing popped up." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: i2c: remove __dev* attributes from subsystem
2012-12-23mm: modify pgdat_balanced() so that it also handles order-0Zlatko Calusic1-60/+45
Teach pgdat_balanced() about order-0 allocations so that we can simplify code in a few places in vmstat.c. Suggested-by: Andrew Morton <[email protected]> Signed-off-by: Zlatko Calusic <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Hugh Dickins <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-12-23Partly revert "[media] uvcvideo: Set error_idx properly for extended ↵Rafael J. Wysocki2-18/+13
controls API failures" Commit f0ed2ce840b3 ("[media] uvcvideo: Set error_idx properly for extended controls API failures") causes user space to behave incorrectly on one of my test machines (there is no sound under KDE 4.9.4 using pulseaudio and there is a knotify4 process occupying one of the CPU cores 100% of the time). Reverting that commit entirely fixes the problem for me. However, commit f0ed2ce840b3 appears to do more than it follows from its changelog, because the changelog only says about the changes related to ctrls->error_idx, while the commit additionally changes error codes returned by various functions in uvc_ctrl.c and uvc_v4l2.c. It turns out that the changes of the returned error codes confuse the user spce, so it is sufficient to revert the part of commit f0ed2ce840b3 not mentioned in its changelog to fix the problem. [ 'ENOENT' is not a valid error return from an ioctl to begin with, and I don't understand how anybody ever even thought it would be. - Linus ] Signed-off-by: Rafael J. Wysocki <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Hans Verkuil <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-12-23sunxi: Change the machine compatible string.Maxime Ripard1-2/+2
Commit 68136b10 ("ARM: sunxi: Change device tree naming scheme for sunxi") changed the naming scheme and the compatible strings used in the device trees related to the sunXi platform, but forgot to change the compatible string in the DT machine definition. This prevents the kernel from booting on these boards. Signed-off-by: Maxime Ripard <[email protected]>
2012-12-23ARM: multi_v7_defconfig: Add ARCH_SUNXIMaxime Ripard1-0/+1
Signed-off-by: Maxime Ripard <[email protected]>
2012-12-23drm/nve0/graph: fix fuc, and enable acceleration on all known chipsetsBen Skeggs5-86/+108
Also adds GK106 to chipsets known by ucode. Signed-off-by: Ben Skeggs <[email protected]>
2012-12-23drm/nvc0/graph: fix fuc, and enable acceleration on GF119Ben Skeggs3-83/+85
Signed-off-by: Ben Skeggs <[email protected]>
2012-12-23drm/nouveau/bios: cache ramcfg strap on later chipsetsBen Skeggs2-1/+18
This fixes suspend/resume on at least Quadro 400. Signed-off-by: Ben Skeggs <[email protected]>
2012-12-23drm/nouveau/mxm: silence output if no bios dataBen Skeggs1-1/+1
Signed-off-by: Ben Skeggs <[email protected]>
2012-12-23drm/nouveau/bios: parse/display extra version componentBen Skeggs2-2/+4
Signed-off-by: Ben Skeggs <[email protected]>
2012-12-23drm/nouveau/bios: implement opcode 0xa9Ben Skeggs5-8/+53
Signed-off-by: Ben Skeggs <[email protected]>
2012-12-23drm/nouveau/bios: update gpio parsing apis to match current designBen Skeggs5-61/+90
Signed-off-by: Ben Skeggs <[email protected]>
2012-12-23drm/nouveau: initial support for GK106Ben Skeggs3-0/+30
Modesetting seems to work alright, as does graphics (using binary driver fuc from nve7...). Lots to be done no doubt, but this'll get an image on the screen for people. Signed-off-by: Ben Skeggs <[email protected]>
2012-12-22i2c: remove __dev* attributes from subsystemBill Pemberton54-247/+241
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <[email protected]> Acked-by: Peter Korsgaard <[email protected]> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <[email protected]> (for i2c-gpio) Acked-by: Guan Xuetao <[email protected]> (for puf3) Acked-by: Barry Song <[email protected]> (for sirf) Reviewed-by: Jean Delvare <[email protected]> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <[email protected]>
2012-12-22hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisorsGuenter Roeck1-1/+1
Result of DIV_ROUND_CLOSEST is undefined for negative dividends if the divisor variable type is unsigned. Fix by declaring divisor as signed variable. Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Jean Delvare <[email protected]>
2012-12-22net: sched: integer overflow fixStefan Hasko1-1/+1
Fixed integer overflow in function htb_dequeue Signed-off-by: Stefan Hasko <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-22CONFIG_HOTPLUG removal from networking coreGreg KH3-15/+0
CONFIG_HOTPLUG is always enabled now, so remove the unused code that was trying to be compiled out when this option was disabled, in the networking core. Cc: Bill Pemberton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-22Drivers: network: more __dev* removalGreg KH3-14/+13
Remove some __dev* markings that snuck in the 3.8-rc1 merge window in the drivers/net/* directory. Cc: Bill Pemberton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-12-21hwmon: (lm73} Detect and report i2c bus errorsChris Verges1-5/+11
If an LM73 device does not exist on an I2C bus, attempts to communicate with the device result in an error code returned from the i2c read/write functions. The current lm73 driver casts that return value from a s32 type to a s16 type, then converts it to a temperature in celsius. Because negative temperatures are valid, it is difficult to distinguish between an error code printed to the response buffer and a negative temperature recorded by the sensor. The solution is to evaluate the return value from the i2c functions before performing any temperature calculations. If the i2c function did not succeed, the error code should be passed back through the virtual file system layer instead of being printed into the response buffer. Before: $ cat /sys/class/hwmon/hwmon0/device/temp1_input -46 After: $ cat /sys/class/hwmon/hwmon0/device/temp1_input cat: read error: No such device or address Signed-off-by: Chris Verges <[email protected]> Cc: [email protected] Signed-off-by: Guenter Roeck <[email protected]>
2012-12-21Linux 3.8-rc1Linus Torvalds1-2/+2
2012-12-21Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds19-445/+738
Pull watchdog updates from Wim Van Sebroeck: "This includes some fixes and code improvements (like clk_prepare_enable and clk_disable_unprepare), conversion from the omap_wdt and twl4030_wdt drivers to the watchdog framework, addition of the SB8x0 chipset support and the DA9055 Watchdog driver and some OF support for the davinci_wdt driver." * git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: mei: avoid oops in watchdog unregister code path watchdog: Orion: Fix possible null-deference in orion_wdt_probe watchdog: sp5100_tco: Add SB8x0 chipset support watchdog: davinci_wdt: add OF support watchdog: da9052: Fix invalid free of devm_ allocated data watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER watchdog: remove depends on CONFIG_EXPERIMENTAL watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>( watchdog: DA9055 Watchdog driver watchdog: omap_wdt: eliminate goto watchdog: omap_wdt: delete redundant platform_set_drvdata() calls watchdog: omap_wdt: convert to devm_ functions watchdog: omap_wdt: convert to new watchdog core watchdog: WatchDog Timer Driver Core: fix comment watchdog: s3c2410_wdt: use clk_prepare_enable and clk_disable_unprepare watchdog: imx2_wdt: Select the driver via ARCH_MXC watchdog: cpu5wdt.c: add missing del_timer call watchdog: hpwdt.c: Increase version string watchdog: Convert twl4030_wdt to watchdog core davinci_wdt: preparation for switch to common clock framework ...
2012-12-21Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds4-17/+18
Pull CIFS fixes from Steve French: "Misc small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: eliminate cifsERROR variable cifs: don't compare uniqueids in cifs_prime_dcache unless server inode numbers are in use cifs: fix double-free of "string" in cifs_parse_mount_options
2012-12-21Merge tag 'dm-3.8-fixes' of ↵Linus Torvalds30-443/+522
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull dm update from Alasdair G Kergon: "Miscellaneous device-mapper fixes, cleanups and performance improvements. Of particular note: - Disable broken WRITE SAME support in all targets except linear and striped. Use it when kcopyd is zeroing blocks. - Remove several mempools from targets by moving the data into the bio's new front_pad area(which dm calls 'per_bio_data'). - Fix a race in thin provisioning if discards are misused. - Prevent userspace from interfering with the ioctl parameters and use kmalloc for the data buffer if it's small instead of vmalloc. - Throttle some annoying error messages when I/O fails." * tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (36 commits) dm stripe: add WRITE SAME support dm: remove map_info dm snapshot: do not use map_context dm thin: dont use map_context dm raid1: dont use map_context dm flakey: dont use map_context dm raid1: rename read_record to bio_record dm: move target request nr to dm_target_io dm snapshot: use per_bio_data dm verity: use per_bio_data dm raid1: use per_bio_data dm: introduce per_bio_data dm kcopyd: add WRITE SAME support to dm_kcopyd_zero dm linear: add WRITE SAME support dm: add WRITE SAME support dm: prepare to support WRITE SAME dm ioctl: use kmalloc if possible dm ioctl: remove PF_MEMALLOC dm persistent data: improve improve space map block alloc failure message dm thin: use DMERR_LIMIT for errors ...
2012-12-21Revert "nfsd: warn on odd reply state in nfsd_vfs_read"J. Bruce Fields1-1/+0
This reverts commit 79f77bf9a4e3dd5ead006b8f17e7c4ff07d8374e. This is obviously wrong, and I have no idea how I missed seeing the warning in testing: I must just not have looked at the right logs. The caller bumps rq_resused/rq_next_page, so it will always be hit on a large enough read. Reported-by: Dave Jones <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-12-21Merge tag 'rdma-for-linus' of ↵Linus Torvalds22-214/+2234
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull more infiniband changes from Roland Dreier: "Second batch of InfiniBand/RDMA changes for 3.8: - cxgb4 changes to fix lookup engine hash collisions - mlx4 changes to make flow steering usable - fix to IPoIB to avoid pinning dst reference for too long" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb4: Fix bug for active and passive LE hash collision path RDMA/cxgb4: Fix LE hash collision bug for passive open connection RDMA/cxgb4: Fix LE hash collision bug for active open connection mlx4_core: Allow choosing flow steering mode mlx4_core: Adjustments to Flow Steering activation logic for SR-IOV mlx4_core: Fix error flow in the flow steering wrapper mlx4_core: Add QPN enforcement for flow steering rules set by VFs cxgb4: Add LE hash collision bug fix path in LLD driver cxgb4: Add T4 filter support IPoIB: Call skb_dst_drop() once skb is enqueued for sending
Powered by cgit, Gruvboxed by Blaster4385.