aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-01-24ping: fix the sk_bound_dev_if match in ping_lookupXin Long1-1/+2
When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" the selftests 'router_broadcast.sh' will fail, as such command # ip vrf exec vrf-h1 ping -I veth0 198.51.100.255 -b can't receive the response skb by the PING socket. It's caused by mismatch of sk_bound_dev_if and dif in ping_rcv() when looking up the PING socket, as dif is vrf-h1 if dif's master was set to vrf-h1. This patch is to fix this regression by also checking the sk_bound_dev_if against sdif so that the packets can stil be received even if the socket is not bound to the vrf device but to the real iif. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Hangbin Liu <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-24net/smc: Transitional solution for clcsock race issueWen Gu1-12/+51
We encountered a crash in smc_setsockopt() and it is caused by accessing smc->clcsock after clcsock was released. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ #53 RIP: 0010:smc_setsockopt+0x59/0x280 [smc] Call Trace: <TASK> __sys_setsockopt+0xfc/0x190 __x64_sys_setsockopt+0x20/0x30 do_syscall_64+0x34/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f16ba83918e </TASK> This patch tries to fix it by holding clcsock_release_lock and checking whether clcsock has already been released before access. In case that a crash of the same reason happens in smc_getsockopt() or smc_switch_to_fallback(), this patch also checkes smc->clcsock in them too. And the caller of smc_switch_to_fallback() will identify whether fallback succeeds according to the return value. Fixes: fd57770dd198 ("net/smc: wait for pending work before clcsock release_sock") Link: https://lore.kernel.org/lkml/[email protected]/T/ Signed-off-by: Wen Gu <[email protected]> Acked-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-24ibmvnic: remove unused ->wait_capabilitySukadev Bhattiprolu2-25/+14
With previous bug fix, ->wait_capability flag is no longer needed and can be removed. Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-24ibmvnic: don't spin in taskletSukadev Bhattiprolu1-6/+0
ibmvnic_tasklet() continuously spins waiting for responses to all capability requests. It does this to avoid encountering an error during initialization of the vnic. However if there is a bug in the VIOS and we do not receive a response to one or more queries the tasklet ends up spinning continuously leading to hard lock ups. If we fail to receive a message from the VIOS it is reasonable to timeout the login attempt rather than spin indefinitely in the tasklet. Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-24ibmvnic: init ->running_cap_crqs earlySukadev Bhattiprolu1-35/+71
We use ->running_cap_crqs to determine when the ibmvnic_tasklet() should send out the next protocol message type. i.e when we get back responses to all our QUERY_CAPABILITY CRQs we send out REQUEST_CAPABILITY crqs. Similiary, when we get responses to all the REQUEST_CAPABILITY crqs, we send out the QUERY_IP_OFFLOAD CRQ. We currently increment ->running_cap_crqs as we send out each CRQ and have the ibmvnic_tasklet() send out the next message type, when this running_cap_crqs count drops to 0. This assumes that all the CRQs of the current type were sent out before the count drops to 0. However it is possible that we send out say 6 CRQs, get preempted and receive all the 6 responses before we send out the remaining CRQs. This can result in ->running_cap_crqs count dropping to zero before all messages of the current type were sent and we end up sending the next protocol message too early. Instead initialize the ->running_cap_crqs upfront so the tasklet will only send the next protocol message after all responses are received. Use the cap_reqs local variable to also detect any discrepancy (either now or in future) in the number of capability requests we actually send. Currently only send_query_cap() is affected by this behavior (of sending next message early) since it is called from the worker thread (during reset) and from application thread (during ->ndo_open()) and they can be preempted. send_request_cap() is only called from the tasklet which processes CRQ responses sequentially, is not be affected. But to maintain the existing symmtery with send_query_capability() we update send_request_capability() also. Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-24ibmvnic: Allow extra failures before disablingSukadev Bhattiprolu1-4/+17
If auto-priority-failover (APF) is enabled and there are at least two backing devices of different priorities, some resets like fail-over, change-param etc can cause at least two back to back failovers. (Failover from high priority backing device to lower priority one and then back to the higher priority one if that is still functional). Depending on the timimg of the two failovers it is possible to trigger a "hard" reset and for the hard reset to fail due to failovers. When this occurs, the driver assumes that the network is unstable and disables the VNIC for a 60-second "settling time". This in turn can cause the ethtool command to fail with "No such device" while the vnic automatically recovers a little while later. Given that it's possible to have two back to back failures, allow for extra failures before disabling the vnic for the settling time. Fixes: f15fde9d47b8 ("ibmvnic: delay next reset if hard reset fails") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-24ipv4: fix ip option filtering for locally generated fragmentsJakub Kicinski1-3/+12
During IP fragmentation we sanitize IP options. This means overwriting options which should not be copied with NOPs. Only the first fragment has the original, full options. ip_fraglist_prepare() copies the IP header and options from previous fragment to the next one. Commit 19c3401a917b ("net: ipv4: place control buffer handling away from fragmentation iterators") moved sanitizing options before ip_fraglist_prepare() which means options are sanitized and then overwritten again with the old values. Fixing this is not enough, however, nor did the sanitization work prior to aforementioned commit. ip_options_fragment() (which does the sanitization) uses ipcb->opt.optlen for the length of the options. ipcb->opt of fragments is not populated (it's 0), only the head skb has the state properly built. So even when called at the right time ip_options_fragment() does nothing. This seems to date back all the way to v2.5.44 when the fast path for pre-fragmented skbs had been introduced. Prior to that ip_options_build() would have been called for every fragment (in fact ever since v2.5.44 the fragmentation handing in ip_options_build() has been dead code, I'll clean it up in -next). In the original patch (see Link) caixf mentions fixing the handling for fragments other than the second one, but I'm not sure how _any_ fragment could have had their options sanitized with the code as it stood. Tested with python (MTU on lo lowered to 1000 to force fragmentation): import socket s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) s.setsockopt(socket.IPPROTO_IP, socket.IP_OPTIONS, bytearray([7,4,5,192, 20|0x80,4,1,0])) s.sendto(b'1'*2000, ('127.0.0.1', 1234)) Before: IP (tos 0x0, ttl 64, id 1053, offset 0, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost.36500 > localhost.search-agent: UDP, length 2000 IP (tos 0x0, ttl 64, id 1053, offset 968, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost > localhost: udp IP (tos 0x0, ttl 64, id 1053, offset 1936, flags [none], proto UDP (17), length 100, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost > localhost: udp After: IP (tos 0x0, ttl 96, id 42549, offset 0, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost.51607 > localhost.search-agent: UDP, bad length 2000 > 960 IP (tos 0x0, ttl 96, id 42549, offset 968, flags [+], proto UDP (17), length 996, options (NOP,NOP,NOP,NOP,RA value 256)) localhost > localhost: udp IP (tos 0x0, ttl 96, id 42549, offset 1936, flags [none], proto UDP (17), length 100, options (NOP,NOP,NOP,NOP,RA value 256)) localhost > localhost: udp RA (20 | 0x80) is now copied as expected, RR (7) is "NOPed out". Link: https://lore.kernel.org/netdev/[email protected]/ Fixes: 19c3401a917b ("net: ipv4: place control buffer handling away from fragmentation iterators") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: caixf <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-24net-procfs: show net devices bound packet typesJianguo Wu1-3/+32
After commit:7866a621043f ("dev: add per net_device packet type chains"), we can not get packet types that are bound to a specified net device by /proc/net/ptype, this patch fix the regression. Run "tcpdump -i ens192 udp -nns0" Before and after apply this patch: Before: [root@localhost ~]# cat /proc/net/ptype Type Device Function 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv After: [root@localhost ~]# cat /proc/net/ptype Type Device Function ALL ens192 tpacket_rcv 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv v1 -> v2: - fix the regression rather than adding new /proc API as suggested by Stephen Hemminger. Fixes: 7866a621043f ("dev: add per net_device packet type chains") Signed-off-by: Jianguo Wu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-24bonding: use rcu_dereference_rtnl when get bonding active slaveHangbin Liu2-5/+1
bond_option_active_slave_get_rcu() should not be used in rtnl_mutex as it use rcu_dereference(). Replace to rcu_dereference_rtnl() so we also can use this function in rtnl protected context. With this update, we can rmeove the rcu_read_lock/unlock in bonding .ndo_eth_ioctl and .get_ts_info. Reported-by: Vladimir Oltean <[email protected]> Fixes: 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-24net: sfp: ignore disabled SFP nodeMarek Behún1-0/+5
Commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") added code which finds SFP bus DT node even if the node is disabled with status = "disabled". Because of this, when phylink is created, it ends with non-null .sfp_bus member, even though the SFP module is not probed (because the node is disabled). We need to ignore disabled SFP bus node. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Signed-off-by: Marek Behún <[email protected]> Cc: [email protected] # 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer") Signed-off-by: David S. Miller <[email protected]>
2022-01-21selftests: net: ioam: expect support for Queue depth dataJustin Iurman1-4/+1
The IOAM queue-depth data field was added a few weeks ago, but the test unit was not updated accordingly. Reported-by: kernel test robot <[email protected]> Fixes: b63c5478e9cb ("ipv6: ioam: Support for Queue depth data field") Signed-off-by: Justin Iurman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-21mptcp: Use struct_group() to avoid cross-field memset()Kees Cook1-3/+3
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() to capture the fields to be reset, so that memset() can be appropriately bounds-checked by the compiler. Cc: Matthieu Baerts <[email protected]> Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-22rxrpc: Adjust retransmission backoffDavid Howells2-6/+4
Improve retransmission backoff by only backing off when we retransmit data packets rather than when we set the lost ack timer. To this end: (1) In rxrpc_resend(), use rxrpc_get_rto_backoff() when setting the retransmission timer and only tell it that we are retransmitting if we actually have things to retransmit. Note that it's possible for the retransmission algorithm to race with the processing of a received ACK, so we may see no packets needing retransmission. (2) In rxrpc_send_data_packet(), don't bump the backoff when setting the ack_lost_at timer, as it may then get bumped twice. With this, when looking at one particular packet, the retransmission intervals were seen to be 1.5ms, 2ms, 3ms, 5ms, 9ms, 17ms, 33ms, 71ms, 136ms, 264ms, 544ms, 1.088s, 2.1s, 4.2s and 8.3s. Fixes: c410bf01933e ("rxrpc: Fix the excessive initial retransmission timeout") Suggested-by: Marc Dionne <[email protected]> Signed-off-by: David Howells <[email protected]> Reviewed-by: Marc Dionne <[email protected]> Tested-by: Marc Dionne <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/164138117069.2023386.17446904856843997127.stgit@warthog.procyon.org.uk/ Signed-off-by: David S. Miller <[email protected]>
2022-01-21Merge branch 'octeontx2-af-fixes'David S. Miller15-76/+164
Subbaraya Sundeep says: ==================== octeontx-af2: Fixes for CN10K and CN9xxx platforms This patchset has consolidated fixes in Octeontx2 driver handling CN10K and CN9xxx platforms. When testing the new CN10K hardware some issues resurfaced like accessing wrong register for CN10K and enabling loopback on not supported interfaces. Some fixes are needed for CN9xxx platforms as well. Below is the description of patches Patch 1: AF sets RX RSS action for all the VFs when a VF is brought up. But when a PF sets RX action for its VF like Drop/Direct to a queue in ntuple filter it is not retained because of AF fixup. This patch skips modifying VF RX RSS action if PF has already set its action. Patch 2: When configuring backpressure wrong register is being read for LBKs hence fixed it. Patch 3: Some RVU blocks may take longer time to reset but are guaranteed to complete the reset. Hence wait till reset is complete. Patch 4: For enabling LMAC CN10K needs another register compared to CN9xxx platforms. Hence changed it. Patch 5: Adds missing barrier before submitting memory pointer to the aura hardware. Patch 6: Increase polling time while link credit restore and also return proper error code when timeout occurs. Patch 7: Internal loopback not supported on LPCS interfaces like SGMII/QSGMII so do not enable it. Patch 8: When there is a error in message processing, AF sets the error response and replies back to requestor. PF forwards a invalid message to VF back if AF reply has error in it. This way VF lacks the actual error set by AF for its message. This is changed such that PF simply forwards the actual reply and let VF handle the error. Patch 9: ntuple filter with "flow-type ether proto 0x8842 vlan 0x92e" was not working since ethertype 0x8842 is NGIO protocol. Hardware parser explicitly parses such NGIO packets and sets the packet as NGIO and do not set it as tagged packet. Fix this by changing parser such that it sets the packet as both NGIO and tagged by using separate layer types. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-01-21octeontx2-af: Add KPU changes to parse NGIO as separate layerKiran Kumar K1-35/+35
With current KPU profile NGIO is being parsed along with CTAG as a single layer. Because of this MCAM/ntuple rules installed with ethertype as 0x8842 are not being hit. Adding KPU profile changes to parse NGIO in separate ltype and CTAG in separate ltype. Fixes: f9c49be90c05 ("octeontx2-af: Update the default KPU profile and fixes") Signed-off-by: Kiran Kumar K <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-21octeontx2-pf: Forward error codes to VFSubbaraya Sundeep1-1/+6
PF forwards its VF messages to AF and corresponding replies from AF to VF. AF sets proper error code in the replies after processing message requests. Currently PF checks the error codes in replies and sends invalid message to VF. This way VF lacks the information of error code set by AF for its messages. This patch changes that such that PF simply forwards AF replies so that VF can handle error codes. Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-21octeontx2-af: cn10k: Do not enable RPM loopback for LPC interfacesGeetha sowjanya1-15/+12
Internal looback is not supported to low rate LPCS interface like SGMII/QSGMII. Hence don't allow to enable for such interfaces. Fixes: 3ad3f8f93c81 ("octeontx2-af: cn10k: MAC internal loopback support") Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-21octeontx2-af: Increase link credit restore polling timeoutGeetha sowjanya2-2/+3
It's been observed that sometimes link credit restore takes a lot of time than the current timeout. This patch increases the default timeout value and return the proper error value on failure. Fixes: 1c74b89171c3 ("octeontx2-af: Wait for TX link idle for credits change") Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-21octeontx2-pf: cn10k: Ensure valid pointers are freed to auraGeetha sowjanya2-0/+3
While freeing SQB pointers to aura, driver first memcpy to target address and then triggers lmtst operation to free pointer to the aura. We need to ensure(by adding dmb barrier)that memcpy is finished before pointers are freed to the aura. This patch also adds the missing sq context structure entry in debugfs. Fixes: ef6c8da71eaf ("octeontx2-pf: cn10K: Reserve LMTST lines per core") Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-21octeontx2-af: cn10k: Use appropriate register for LMAC enableGeetha sowjanya7-7/+66
CN10K platforms uses RPM(0..2)_MTI_MAC100(0..3)_COMMAND_CONFIG register for lmac TX/RX enable whereas CN9xxx platforms use CGX_CMRX_CONFIG register. This config change was missed when adding support for CN10K RPM. Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support") Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-21octeontx2-af: Retry until RVU block reset completeGeetha sowjanya1-2/+5
Few RVU blocks like SSO require more time for reset on some silicons. Hence retrying the block reset until success. Fixes: c0fa2cff8822c ("octeontx2-af: Handle return value in block reset") Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-21octeontx2-af: Fix LBK backpressure id countSunil Goutham1-3/+3
In rvu_nix_get_bpid() lbk_bpid_cnt is being read from wrong register. Due to this backpressure enable is failing for LBK VF32 onwards. This patch fixes that. Fixes: fe1939bb2340 ("octeontx2-af: Add SDP interface support") Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-21octeontx2-af: Do not fixup all VF action entriesSubbaraya Sundeep2-11/+31
AF modifies all the rules destined for VF to use the action same as default RSS action. This fixup was needed because AF only installs default rules with RSS action. But the action in rules installed by a PF for its VFs should not be changed by this fixup. This is because action can be drop or direct to queue as specified by user(ntuple filters). This patch fixes that problem. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Naveen Mamindlapalli <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-21Merge tag 'wireless-2022-01-21' of ↵David S. Miller1-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v5.17 First set of fixes for v5.17. This is the first pull request from the new wireless tree and only changes to MAINTAINERS file. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-01-21Merge branch '40GbE' of ↵David S. Miller6-31/+131
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-01-20 This series contains updates to i40e driver only. Jedrzej increases delay for EMP reset and adds checks to ensure a VF request to change queues can be met. Sylwester moves the placement of the Flow Director queue as to not fragment the queue pile which would cause later re-allocation issues. Karen prevents VF reset being invoked while another is still occurring to avoid reading invalid data. Joe Damato fixes some statistics fields to match the values of the fields they are based on. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-01-20Merge branch 'mptcp-a-few-fixes'Jakub Kicinski2-13/+31
Mat Martineau says: ==================== mptcp: A few fixes Patch 1 fixes a RCU locking issue when processing a netlink command that updates endpoint flags in the in-kernel MPTCP path manager. Patch 2 fixes a typo affecting available endpoint id tracking. Patch 3 fixes IPv6 routing in the MPTCP self tests. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-20selftests: mptcp: fix ipv6 routing setupPaolo Abeni1-2/+3
MPJ ipv6 selftests currently lack per link route to the server net. Additionally, ipv6 subflows endpoints are created without any interface specified. The end-result is that in ipv6 self-tests subflows are created all on the same link, leading to expected delays and sporadic self-tests failures. Fix the issue by adding the missing setup bits. Fixes: 523514ed0a99 ("selftests: mptcp: add ADD_ADDR IPv6 test cases") Reported-and-tested-by: Geliang Tang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-20mptcp: fix removing ids bitmap settingGeliang Tang1-1/+1
In mptcp_pm_nl_rm_addr_or_subflow(), the bit of rm_list->ids[i] in the id_avail_bitmap should be set, not rm_list->ids[1]. This patch fixed it. Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-20mptcp: fix msk traversal in mptcp_nl_cmd_set_flags()Paolo Abeni1-10/+27
The MPTCP endpoint list is under RCU protection, guarded by the pernet spinlock. mptcp_nl_cmd_set_flags() traverses the list without acquiring the spin-lock nor under the RCU critical section. This change addresses the issue performing the lookup and the endpoint update under the pernet spinlock. Fixes: 0f9f696a502e ("mptcp: add set_flags command in PM netlink") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski4-9/+19
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Incorrect helper module alias in netbios_ns, from Florian Westphal. 2) Remove unused variable in nf_tables. 3) Uninitialized last expression in nf_tables register tracking. 4) Memleak in nft_connlimit after moving stateful data out of the expression data area. 5) Bogus invalid stats update when NF_REPEAT is returned, from Florian. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: conntrack: don't increment invalid counter on NF_REPEAT netfilter: nft_connlimit: memleak if nf_ct_netns_get() fails netfilter: nf_tables: set last expression in register tracking area netfilter: nf_tables: remove unused variable netfilter: nf_conntrack_netbios_ns: fix helper module alias ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-20ipv6: annotate accesses to fn->fn_sernumEric Dumazet3-12/+15
struct fib6_node's fn_sernum field can be read while other threads change it. Add READ_ONCE()/WRITE_ONCE() annotations. Do not change existing smp barriers in fib6_get_cookie_safe() and __fib6_update_sernum_upto_root() syzbot reported: BUG: KCSAN: data-race in fib6_clean_node / inet6_csk_route_socket write to 0xffff88813df62e2c of 4 bytes by task 1920 on cpu 1: fib6_clean_node+0xc2/0x260 net/ipv6/ip6_fib.c:2178 fib6_walk_continue+0x38e/0x430 net/ipv6/ip6_fib.c:2112 fib6_walk net/ipv6/ip6_fib.c:2160 [inline] fib6_clean_tree net/ipv6/ip6_fib.c:2240 [inline] __fib6_clean_all+0x1a9/0x2e0 net/ipv6/ip6_fib.c:2256 fib6_flush_trees+0x6c/0x80 net/ipv6/ip6_fib.c:2281 rt_genid_bump_ipv6 include/net/net_namespace.h:488 [inline] addrconf_dad_completed+0x57f/0x870 net/ipv6/addrconf.c:4230 addrconf_dad_work+0x908/0x1170 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:359 ret_from_fork+0x1f/0x30 read to 0xffff88813df62e2c of 4 bytes by task 15701 on cpu 0: fib6_get_cookie_safe include/net/ip6_fib.h:285 [inline] rt6_get_cookie include/net/ip6_fib.h:306 [inline] ip6_dst_store include/net/ip6_route.h:234 [inline] inet6_csk_route_socket+0x352/0x3c0 net/ipv6/inet6_connection_sock.c:109 inet6_csk_xmit+0x91/0x1e0 net/ipv6/inet6_connection_sock.c:121 __tcp_transmit_skb+0x1323/0x1840 net/ipv4/tcp_output.c:1402 tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline] tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680 __tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864 tcp_push+0x2d9/0x2f0 net/ipv4/tcp.c:725 mptcp_push_release net/mptcp/protocol.c:1491 [inline] __mptcp_push_pending+0x46c/0x490 net/mptcp/protocol.c:1578 mptcp_sendmsg+0x9ec/0xa50 net/mptcp/protocol.c:1764 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] kernel_sendmsg+0x97/0xd0 net/socket.c:745 sock_no_sendpage+0x84/0xb0 net/core/sock.c:3086 inet_sendpage+0x9d/0xc0 net/ipv4/af_inet.c:834 kernel_sendpage+0x187/0x200 net/socket.c:3492 sock_sendpage+0x5a/0x70 net/socket.c:1007 pipe_to_sendpage+0x128/0x160 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x207/0x500 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0x94/0xd0 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] direct_splice_actor+0x80/0xa0 fs/splice.c:936 splice_direct_to_actor+0x345/0x650 fs/splice.c:891 do_splice_direct+0x106/0x190 fs/splice.c:979 do_sendfile+0x675/0xc40 fs/read_write.c:1245 __do_sys_sendfile64 fs/read_write.c:1310 [inline] __se_sys_sendfile64 fs/read_write.c:1296 [inline] __x64_sys_sendfile64+0x102/0x140 fs/read_write.c:1296 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000026f -> 0x00000271 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 15701 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 The Fixes tag I chose is probably arbitrary, I do not think we need to backport this patch to older kernels. Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-20tcp: add a missing sk_defer_free_flush() in tcp_splice_read()Eric Dumazet1-0/+1
Without it, splice users can hit the warning added in commit 79074a72d335 ("net: Flush deferred skb free on socket destroy") Fixes: f35f821935d8 ("tcp: defer skb freeing after socket lock is released") Fixes: 79074a72d335 ("net: Flush deferred skb free on socket destroy") Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Gal Pressman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-20tcp: Add a stub for sk_defer_free_flush()Gal Pressman1-0/+4
When compiling the kernel with CONFIG_INET disabled, the sk_defer_free_flush() should be defined as a nop. This resolves the following compilation error: ld: net/core/sock.o: in function `sk_defer_free_flush': ./include/net/tcp.h:1378: undefined reference to `__sk_defer_free_flush' Fixes: 79074a72d335 ("net: Flush deferred skb free on socket destroy") Reported-by: kernel test robot <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Gal Pressman <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-20phylib: fix potential use-after-freeMarek Behún1-3/+3
Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device(). Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-20i40e: fix unsigned stat widthsJoe Damato3-7/+7
Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match the width of the stats counters in struct i40e_rx_queue_stats. Update debugfs code to use the correct format specifier for u64. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Joe Damato <[email protected]> Reported-by: kernel test robot <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20i40e: Fix for failed to init adminq while VF resetKaren Sornek3-2/+46
Fix for failed to init adminq: -53 while VF is resetting via MAC address changing procedure. Added sync module to avoid reading deadbeef value in reinit adminq during software reset. Without this patch it is possible to trigger VF reset procedure during reinit adminq. This resulted in an incorrect reading of value from the AQP registers and generated the -53 error. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Karen Sornek <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20i40e: Fix queues reservation for XDPSylwester Dziedziuch1-0/+14
When XDP was configured on a system with large number of CPUs and X722 NIC there was a call trace with NULL pointer dereference. i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12 i40e 0000:87:00.0: setup of MAIN VSI failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e] Call Trace: ? i40e_reconfig_rss_queues+0x130/0x130 [i40e] dev_xdp_install+0x61/0xe0 dev_xdp_attach+0x18a/0x4c0 dev_change_xdp_fd+0x1e6/0x220 do_setlink+0x616/0x1030 ? ahci_port_stop+0x80/0x80 ? ata_qc_issue+0x107/0x1e0 ? lock_timer_base+0x61/0x80 ? __mod_timer+0x202/0x380 rtnl_setlink+0xe5/0x170 ? bpf_lsm_binder_transaction+0x10/0x10 ? security_capable+0x36/0x50 rtnetlink_rcv_msg+0x121/0x350 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x50/0xf0 netlink_unicast+0x1d3/0x2a0 netlink_sendmsg+0x22a/0x440 sock_sendmsg+0x5e/0x60 __sys_sendto+0xf0/0x160 ? __sys_getsockname+0x7e/0xc0 ? _copy_from_user+0x3c/0x80 ? __sys_setsockopt+0xc8/0x1a0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f83fa7a39e0 This was caused by PF queue pile fragmentation due to flow director VSI queue being placed right after main VSI. Because of this main VSI was not able to resize its queue allocation for XDP resulting in no queues allocated for main VSI when XDP was turned on. Fix this by always allocating last queue in PF queue pile for a flow director VSI. Fixes: 41c445ff0f48 ("i40e: main driver core") Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action") Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20i40e: Fix issue when maximum queues is exceededJedrzej Jagielski3-13/+61
Before this patch VF interface vanished when maximum queue number was exceeded. Driver tried to add next queues even if there was not enough space. PF sent incorrect number of queues to the VF when there were not enough of them. Add an additional condition introduced to check available space in 'qp_pile' before proceeding. This condition makes it impossible to add queues if they number is greater than the number resulting from available space. Also add the search for free space in PF queue pair piles. Without this patch VF interfaces are not seen when available space for queues has been exceeded and following logs appears permanently in dmesg: "Unable to get VF config (-32)". "VF 62 failed opcode 3, retval: -5" "Unable to get VF config due to PF error condition, not retrying" Fixes: 7daa6bf3294e ("i40e: driver core headers") Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Jaroslaw Gawin <[email protected]> Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20i40e: Increase delay to 1 s after global EMP resetJedrzej Jagielski1-9/+3
Recently simplified i40e_rebuild causes that FW sometimes is not ready after NVM update, the ping does not return. Increase the delay in case of EMP reset. Old delay of 300 ms was introduced for specific cards for 710 series. Now it works for all the cards and delay was increased. Fixes: 1fa51a650e1d ("i40e: Add delay after EMP reset for firmware to recover") Signed-off-by: Arkadiusz Kubalewski <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20Merge branch 'stmmac-fixes'David S. Miller1-16/+26
Yuji Ishikawa says: ==================== net: stmmac: dwmac-visconti: Fix bit definitions and clock configuration for RMII mode This series is a fix for RMII/MII operation mode of the dwmac-visconti driver. It is composed of two parts: * 1/2: fix constant definitions for cleared bits in ETHER_CLK_SEL register * 2/2: fix configuration of ETHER_CLK_SEL register for running in RMII operation mode. net: stmmac: dwmac-visconti: Fix bit definitions for ETHER_CLK_SEL v1 -> v2: - added Fixes tag to commit message net: stmmac: dwmac-visconti: Fix clock configuration for RMII mode v1 -> v2: - added Fixes tag to commit message ==================== Signed-off-by: David S. Miller <[email protected]>
2022-01-20net: stmmac: dwmac-visconti: Fix clock configuration for RMII modeYuji Ishikawa1-11/+21
Bit pattern of the ETHER_CLOCK_SEL register for RMII/MII mode should be fixed. Also, some control bits should be modified with a specific sequence. Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Yuji Ishikawa <[email protected]> Reviewed-by: Nobuhiro Iwamatsu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-20net: stmmac: dwmac-visconti: Fix bit definitions for ETHER_CLK_SELYuji Ishikawa1-5/+5
just 0 should be used to represent cleared bits * ETHER_CLK_SEL_DIV_SEL_20 * ETHER_CLK_SEL_TX_CLK_EXT_SEL_IN * ETHER_CLK_SEL_RX_CLK_EXT_SEL_IN * ETHER_CLK_SEL_TX_CLK_O_TX_I * ETHER_CLK_SEL_RMII_CLK_SEL_IN Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Yuji Ishikawa <[email protected]> Reviewed-by: Nobuhiro Iwamatsu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-20ipv6_tunnel: Rate limit warning messagesIdo Schimmel1-4/+4
The warning messages can be invoked from the data path for every packet transmitted through an ip6gre netdev, leading to high CPU utilization. Fix that by rate limiting the messages. Fixes: 09c6bbf090ec ("[IPV6]: Do mandatory IPv6 tunnel endpoint checks in realtime") Reported-by: Maksym Yaremchuk <[email protected]> Tested-by: Maksym Yaremchuk <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Amit Cohen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-20ethtool: Fix link extended state for big endianMoshe Tal1-1/+1
The link extended sub-states are assigned as enum that is an integer size but read from a union as u8, this is working for small values on little endian systems but for big endian this always give 0. Fix the variable in the union to match the enum size. Fixes: ecc31c60240b ("ethtool: Add link extended state") Signed-off-by: Moshe Tal <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Tested-by: Ido Schimmel <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Amit Cohen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-20net: phy: broadcom: hook up soft_reset for BCM54616SRobert Hancock1-0/+1
A problem was encountered with the Bel-Fuse 1GBT-SFP05 SFP module (which is a 1 Gbps copper module operating in SGMII mode with an internal BCM54616S PHY device) using the Xilinx AXI Ethernet MAC core, where the module would work properly on the initial insertion or boot of the device, but after the device was rebooted, the link would either only come up at 100 Mbps speeds or go up and down erratically. I found no meaningful changes in the PHY configuration registers between the working and non-working boots, but the status registers seemed to have a lot of error indications set on the SERDES side of the device on the non-working boot. I suspect the problem is that whatever happens on the SGMII link when the device is rebooted and the FPGA logic gets reloaded ends up putting the module's onboard PHY into a bad state. Since commit 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") the genphy_soft_reset call is not made automatically by the PHY core unless the callback is explicitly specified in the driver structure. For most of these Broadcom devices, there is probably a hardware reset that gets asserted to reset the PHY during boot, however for SFP modules (where the BCM54616S is commonly found) no such reset line exists, so if the board keeps the SFP cage powered up across a reboot, it will end up with no reset occurring during reboots. Hook up the genphy_soft_reset callback for BCM54616S to ensure that a PHY reset is performed before the device is initialized. This appears to fix the issue with erratic operation after a reboot with this SFP module. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Robert Hancock <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-20net: sched: Clarify error message when qdisc kind is unknownVictor Nogueira1-1/+1
When adding a tc rule with a qdisc kind that is not supported or not compiled into the kernel, the kernel emits the following error: "Error: Specified qdisc not found.". Found via tdc testing when ETS qdisc was not compiled in and it was not obvious right away what the message meant without looking at the kernel code. Change the error message to be more explicit and say the qdisc kind is unknown. Signed-off-by: Victor Nogueira <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-20net: fix information leakage in /proc/net/ptypeCongyu Liu3-1/+5
In one net namespace, after creating a packet socket without binding it to a device, users in other net namespaces can observe the new `packet_type` added by this packet socket by reading `/proc/net/ptype` file. This is minor information leakage as packet socket is namespace aware. Add a net pointer in `packet_type` to keep the net namespace of of corresponding packet socket. In `ptype_seq_show`, this net pointer must be checked when it is not NULL. Fixes: 2feb27dbe00c ("[NETNS]: Minor information leak via /proc/net/ptype file.") Signed-off-by: Congyu Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-20Merge tag 'net-5.17-rc1' of ↵Linus Torvalds91-414/+1041
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, bpf. Quite a handful of old regression fixes but most of those are pre-5.16. Current release - regressions: - fix memory leaks in the skb free deferral scheme if upper layer protocols are used, i.e. in-kernel TCP readers like TLS Current release - new code bugs: - nf_tables: fix NULL check typo in _clone() functions - change the default to y for Vertexcom vendor Kconfig - a couple of fixes to incorrect uses of ref tracking - two fixes for constifying netdev->dev_addr Previous releases - regressions: - bpf: - various verifier fixes mainly around register offset handling when passed to helper functions - fix mount source displayed for bpffs (none -> bpffs) - bonding: - fix extraction of ports for connection hash calculation - fix bond_xmit_broadcast return value when some devices are down - phy: marvell: add Marvell specific PHY loopback - sch_api: don't skip qdisc attach on ingress, prevent ref leak - htb: restore minimal packet size handling in rate control - sfp: fix high power modules without diagnostic monitoring - mscc: ocelot: - don't let phylink re-enable TX PAUSE on the NPI port - don't dereference NULL pointers with shared tc filters - smsc95xx: correct reset handling for LAN9514 - cpsw: avoid alignment faults by taking NET_IP_ALIGN into account - phy: micrel: use kszphy_suspend/_resume for irq aware devices, avoid races with the interrupt Previous releases - always broken: - xdp: check prog type before updating BPF link - smc: resolve various races around abnormal connection termination - sit: allow encapsulated IPv6 traffic to be delivered locally - axienet: fix init/reset handling, add missing barriers, read the right status words, stop queues correctly - add missing dev_put() in sock_timestamping_bind_phc() Misc: - ipv4: prevent accidentally passing RTO_ONLINK to ip_route_output_key_hash() by sanitizing flags - ipv4: avoid quadratic behavior in netns dismantle - stmmac: dwmac-oxnas: add support for OX810SE - fsl: xgmac_mdio: add workaround for erratum A-009885" * tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits) ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys ipv4: avoid quadratic behavior in netns dismantle net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses dt-bindings: net: Document fsl,erratum-a009885 net/fsl: xgmac_mdio: Add workaround for erratum A-009885 net: mscc: ocelot: fix using match before it is set net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind() net: axienet: increase default TX ring size to 128 net: axienet: fix for TX busy handling net: axienet: fix number of TX ring slots for available check net: axienet: Fix TX ring slot available check net: axienet: limit minimum TX ring size net: axienet: add missing memory barriers net: axienet: reset core on initialization prior to MDIO access net: axienet: Wait for PhyRstCmplt after core reset net: axienet: increase reset timeout bpf, selftests: Add ringbuf memory type confusion test ...
2022-01-20Merge branch 'akpm' (patches from Andrew)Linus Torvalds77-873/+826
Merge more updates from Andrew Morton: "55 patches. Subsystems affected by this patch series: percpu, procfs, sysctl, misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2, hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan" * emailed patches from Andrew Morton <[email protected]>: (55 commits) lib: remove redundant assignment to variable ret ubsan: remove CONFIG_UBSAN_OBJECT_SIZE kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB btrfs: use generic Kconfig option for 256kB page size limit arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB configs: introduce debug.config for CI-like setup delayacct: track delays from memory compact Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact delayacct: cleanup flags in struct task_delay_info and functions use it delayacct: fix incomplete disable operation when switch enable to disable delayacct: support swapin delay accounting for swapping without blkio panic: remove oops_id panic: use error_report_end tracepoint on warnings fs/adfs: remove unneeded variable make code cleaner FAT: use io_schedule_timeout() instead of congestion_wait() hfsplus: use struct_group_attr() for memcpy() region nilfs2: remove redundant pointer sbufs fs/binfmt_elf: use PT_LOAD p_align values for static PIE const_structs.checkpatch: add frequently used ops structs ...
2022-01-20lib: remove redundant assignment to variable retColin Ian King1-2/+0
The variable ret is being assigned a value that is never read. If the for-loop is entered then ret is immediately re-assigned a new value. If the for-loop is not executed ret is never read. The assignment is redundant and can be removed. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.