aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski204-1027/+1107
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-26net/mlx5: DR, Add support for update FTEYevgeny Kliteynik1-9/+30
Add the support for update FTE, which is needed for cases where there are multiple rules with the same match. In such case fs_core will merge the actions and call update FTE to update current FTE. Since we don't want to disrupt the traffic, we will add the new duplicate rule, and only then remove the old duplicate rule. Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Improve rule tracking memory consumptionYevgeny Kliteynik3-86/+83
To track each STE of the rule a rule member was allocated, each member would point to one STE. This means that we would allocate 40B (rule member) * number of STEs per rule. To reduce this per rule allocation we use the STE tree pointers for next_htbl and pointing STE to navigate the tree, this allows us to keep only the pointer to the last STE of rule (always unique). From the last rule STE we are able to traverse and rebuild all of the STEs that construct the rule. In our testing with 8M rules, each consisting of 7 STES, we were able to reduce 1.6GB of memory. Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Erez Shitrit <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Remove rehash ctrl struct from dr_htblYevgeny Kliteynik3-21/+24
The calculations to decide for the maximum allowed collision threshold are simple and there is no reason to save them on the htbl struct. Signed-off-by: Erez Shitrit <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Remove HW specific STE type from nic domainYevgeny Kliteynik10-45/+61
Instead of using the HW specific STEv0 type, it is better to use an enum to indicate if this is an RX or TX nic domain. This means that now we will need to convert the nic domain type to the corresponding STE type. Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Merge DR_STE_SIZE enumsYevgeny Kliteynik1-3/+0
Merge DR_STE_SIZE enums - no need for a separate enum for reduced STE size. Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Skip source port matching on FDB RX domainYevgeny Kliteynik1-1/+13
The FDB RX pipe is connected to the wire and the source port for all incoming packets equals to wire, single uplink port per PF, this means there is no point of matching on the source port in such case. Once we recognize such case, we will optimize the RX steering rule. Note that in such case we clean both source_eswitch_owner_vhca_id and source_port. Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Add ignore_flow_level support for multi-dest flow tablesYevgeny Kliteynik6-6/+18
When creating an FTE, we might need to create multi-destination flow table, which is eventually created by FW. In such case, this FW table should include all the FTE properties as requested by the upper layer, including the ability to point to another flow table with level lower or equal to the current table - indicated by the "ignore_flow_level" property. Signed-off-by: Chris Mi <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Use FW API when updating FW-owned flow tableYevgeny Kliteynik1-0/+3
Need to call the DR API only when it is DR table. To update FW-owned table the driver should call the FW API. Signed-off-by: Erez Shitrit <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, replace uintN_t with kernel-style typesYevgeny Kliteynik2-6/+6
Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Support IPv6 matching on flow label for STEv0Yevgeny Kliteynik1-0/+6
Add missing support for matching on IPv6 flow label for STEv0. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Reduce print level for FT chaining level checkBodong Wang1-2/+2
There are usecases with Connection Tracking that have such connection as default, printing this warning in dmesg confuses the user. Signed-off-by: Bodong Wang <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Warn and ignore SW steering rule insertion on QP errYevgeny Kliteynik2-2/+15
In the event of SW steering QP entering error state, SW steering cannot insert more rules, and will silently ignore the insertion after issuing a warning. Signed-off-by: Yuval Avnery <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Improve error flow in actions_build_ste_arrYevgeny Kliteynik1-16/+56
Improve error flow and print actions sequence when an invalid/unsupported sequence provided. Signed-off-by: Erez Shitrit <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Enable QP retransmissionYevgeny Kliteynik1-0/+1
Under high stress, SW steering might get stuck on polling for completion that never comes. For such cases QP needs to have protocol retransmission mechanism enabled. Currently the retransmission timeout is defined as 0 (unlimited). Fix this by defining a real timeout. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Enable VLAN pop on TX and VLAN push on RXYevgeny Kliteynik3-9/+118
Enable pop VLAN action in TX and push VLAN in RX. These actions are supported only on STEv1. On TX: when a host sends a packet, VLAN is popped at the beginning. On RX: just before passing the packet to the host the VLAN is pushed. Signed-off-by: Muhammad Sammar <[email protected]> Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Split modify VLAN state to separate pop/push statesYevgeny Kliteynik1-26/+27
Split modify vlan state in the actions state machine to pop vlan and push vlan states. This enables using of pop/push vlan without restrictions (e.g. pop vlan on TX in STEv1). Signed-off-by: Muhammad Sammar <[email protected]> Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, Added support for REMOVE_HEADER packet reformatYevgeny Kliteynik5-7/+96
ConnectX supports offloading of various encapsulations and decapsulations (e.g. VXLAN), which are performed by 'Packet Reformat' action. Starting with ConnectX-6 DX, a new reformat type is supported - REMOVE_HEADER, which allows deleting an arbitrary size chunk at the selected position in the packet. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: DR, fix a potential use-after-free bugWentao_Liang1-1/+1
In line 849 (#1), "mlx5dr_htbl_put(cur_htbl);" drops the reference to cur_htbl and may cause cur_htbl to be freed. However, cur_htbl is subsequently used in the next line, which may result in an use-after-free bug. Fix this by calling mlx5dr_err() before the cur_htbl is put. Signed-off-by: Wentao_Liang <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5e: Use correct eswitch for stack devices with lagDmytro Linkin1-0/+18
If link aggregation is used within stack devices driver rejects encap rules if PF of the VF tunnel device is down. This happens because route resolved for other PF and its eswitch instance is used to determine correct vport. To fix that use devcom feature to retrieve other eswitch instance if failed to find vport for the 1st eswitch and LAG is active. Fixes: 10742efc20a4 ("net/mlx5e: VF tunnel TX traffic offloading") Signed-off-by: Dmytro Linkin <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: E-Switch, Set vhca id valid flag when creating indir fwd groupMaor Dickman1-0/+1
When indirect forward group is created, flow is added with vhca id but without setting vhca id valid flag which violates the PRM. Fix by setting the missing flag, vhca id valid. Fixes: 34ca65352ddf ("net/mlx5: E-Switch, Indirect table infrastructure") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5e: Fix possible use-after-free deleting fdb ruleRoi Dayan1-2/+2
After neigh-update-add failure we are still with a slow path rule but the driver always assume the rule is an fdb rule. Fix neigh-update-del by checking slow path tc flag on the flow. Also fix neigh-update-add for when neigh-update-del fails the same. Fixes: 5dbe906ff1d5 ("net/mlx5e: Use a slow path rule instead if vxlan neighbour isn't available") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Paul Blakey <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: Remove all auxiliary devices at the unregister eventLeon Romanovsky1-1/+1
The call to mlx5_unregister_device() means that mlx5_core driver is removed. In such scenario, we need to disregard all other flags like attach/detach and forcibly remove all auxiliary devices. Fixes: a5ae8fc9058e ("net/mlx5e: Don't create devices during unload flow") Tested-and-Reported-by: Yicong Yang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26net/mlx5: Lag, fix multipath lag activationDima Chumak3-0/+11
When handling FIB_EVENT_ENTRY_REPLACE event for a new multipath route, lag activation can be missed if a stale (struct lag_mp)->mfi pointer exists, which was associated with an older multipath route that had been removed. Normally, when a route is removed, it triggers mlx5_lag_fib_event(), which handles FIB_EVENT_ENTRY_DEL and clears mfi pointer. But, if mlx5_lag_check_prereq() condition isn't met, for example when eswitch is in legacy mode, the fib event is skipped and mfi pointer becomes stale. Fix by resetting mfi pointer to NULL in mlx5_deactivate_lag(). Fixes: 8a66e4585979 ("net/mlx5: Change ownership model for lag") Signed-off-by: Dima Chumak <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-08-26iwlwifi: mvm: don't use FW key ID in beacon protectionJohannes Berg1-14/+27
To check beacon protection had a mismatch of the key ID we currently use the key ID from the firmware, but firmware side we want to clean up the API to stop reporting this. Instead, check the IWL_RX_MPDU_STATUS_KEY_VALID bit that indicates that the firmware used the correct key, and if that's set but we get invalid MIC/replay use the key ID from the frame to look up the key and notify mac80211 of MIC error or replay. Since both keys must have the same cipher and thus MIC length, we can use either of them to look up the MIC length. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.30e665d39b07.I78bf7d304ef5a80cecf5fa1c1fca0b51b956cceb@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: Fix scan channel flags settingsIlan Peer1-1/+1
The iwl_mvm_scan_ch_n_aps_flag() is called with a variable before the value of the variable is set. Fix it. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.f6f188980a5e.Ie7331a8b94004d308f6cbde44e519155a5be91dd@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: support broadcast TWT aloneShaul Triebitz1-8/+7
Tell the firmware about broadcast TWT support even if individual TWT is not supported. In that case the firmware will negotiate only a broadcast TWT session. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.556934ed023a.I843677252be64f4732e434ab9ef72f487625e49e@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: introduce iwl_stored_beacon_notif_v3Gregory Greenman3-7/+52
The new version sends station id in the notification. It's still not used, but need to adjust the code since the offset of the data was changed. Signed-off-by: Gregory Greenman <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.87bc9e45c40b.I770493dc4a293ed8bdf059518e94dccf5dd1b3a7@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: move get pnvm file name to a separate functionDror Moshe2-11/+22
Move code that generates the pnvm file name to a separate function, so that it can be reused. Signed-off-by: Dror Moshe <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.7d2dd18c75a2.I3652584755b9ab44909ddcd09ff4d80c6690a1ad@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: add support for responder config command version 9Avraham Stern2-9/+88
This version adds the following configuration options: 1. Enable/disable setting the session id in the FTM frame 2. Set the BSS color for the responder 3. Set the minimum and maximum time between measurements for non trigger based NDP ranging. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.0a10d43f3d7f.Ice4112c1910cf94babd1c2d492a3a3de9f7ee6cb@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: add support for range request command version 13Avraham Stern3-15/+194
This version adds the following configuration options: 1. Set the BSS color for NDP ranging 2. Set the minimum and maximum time between measurements for non trigger based NDP ranging. 3. Terminate the session in case the responder requests LMR feedback. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.9dcd5210b7e5.I76f6977cde852de0f251344e279ad85076eef8d6@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: allow debug init in RF-killJohannes Berg1-0/+1
We can send this even if initializing in RF-kill, thus suppressing a bunch of error messages about it. In fact, we _want_ to, since we might still want to debug the firmware even if in RF-kill. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.bcdb076609e2.I2d177c00772510b5338d8aa45af7558138b08448@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: don't schedule the roc_done_wk if it is already runningAvraham Stern1-12/+19
When P2P roc is removed, the IWL_MVM_STATUS_NEED_FLUSH_P2P bit is set to indicate to iwl_mvm_roc_done_wk() that the removed roc is a P2P one, so it will flush the broadcast station and not the aux station. However, since setting this bit and scheduling the worker is done in roc ended flow as well as in case the roc is removed, there is a race where the worker has already started running (but did not test this bit yet) and then it is scheduled again. In this case, the first run of the worker will clear this bit, and thus the second run will find it already cleared and will try to flush and remove the aux station by mistake. Fix it by scheduling the worker only if this bit is not yet set. In case this bit is already set, the worker is either running or scheduled, so there is no need to re-schedule it. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.8c147659b331.If5924375e9bfd46214ab8ab81cb9d0f5c82fbcbc@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: yoyo: support for new DBGI_SRAM regionMukesh Sisodiya3-0/+47
new region handling is added for dump collection. Signed-off-by: Mukesh Sisodiya <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.af9a24b82396.I53c5f82bd2d0f56fd699e3841c922082d99f1c90@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: add 'Rx control frame to MBSSID' HE capabilityShaul Triebitz1-1/+2
'Rx control frame to MBSSID' is supported by HW and FW. Add the capability to the HE mac capabilities. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.f3d6561dd8ee.I193d5331b43a1ecdae59eaedb37f0190a6d2311d@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: fw: fix debug dump data declarationsJohannes Berg2-13/+17
The debug dump ranges aren't just an array of such ranges since each range has a variable size. Therefore, the use of a struct array is misleading at best. Change it to be a u8 data[] instead of the struct array, the code doesn't significantly change since it's actually doing things correctly now. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.693c9891097d.Idcaab1fd659e8be2f56be647b2534befd61a4460@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: api: remove datamember from structJohannes Berg1-2/+1
We don't use this, but we embed this struct elsewhere and having structs with flexible arrays embedded isn't quite right, with sparse (for example) complaining. Remove the data[] member in this case. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.72ca1232b27c.I6ec766691b89670e1683f9fc0fbd12648309a574@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: fix __percpu annotationJohannes Berg1-1/+1
Sparse warns about some type mismatches, which really is just because of the strangely placed __percpu annotation. Put it into the correct place. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.0a292b05fcf4.I7e89dfa6495143585021cb628ebb17d52e4588e5@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: pcie: avoid dma unmap/remap in crash dumpJohannes Berg1-6/+2
DMA-API debug code pointed out that in this code path we never check the return value of dma_map_page(), which could fail. However, we don't really even want to unmap/remap, we just want to ensure that we can actually access the last version of the data that the (now-dead) device may have written, so only need to dma_sync_single_for_cpu() instead. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.5987f35883a2.I2d9ea5ecc69a5e5947b546fb15f33363a0595651@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: acpi: fill in SAR tables with defaultsLuca Coelho1-8/+13
If the tables we get in the iwl_sar_set_profile() is smaller than the revision we support, we need to fill the values with 0. Make sure that's the case. Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.7fb9716db7ba.I75541846e0720f80695186ba39398133c8758280@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: acpi: fill in WGDS table with defaultsLuca Coelho1-13/+29
The tables we store are the larger of all the revisions, so we need to fill in the values that we don't get from ACPI when using older revisions. Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.01b12461a30b.I08d1f9154f26eca25c44616efdb5223bcc1935f3@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: bump FW API to 65 for AX devicesLuca Coelho1-1/+1
Start supporting API version 65 for AX devices. Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210819183728.1cb15b015485.I2818924b772d7518f4d9fc38b4caab3494ab11f9@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: acpi: support reading and storing WGDS revision 2Luca Coelho2-14/+43
Revisions 0 and 1 are identical, so we were already supporting that. But revision 2 has a different size, so we have to try to read them separately. Add support for this new revision. Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.78e441b16f9c.I2d79492f05624ddd02c533c673811a36eaf8a396@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: load regdomain at INIT stageMiri Korenblit3-2/+26
We used to load the regdomain only in the load stage, this caused the 'iw phy phy0 reg get' command to fail if we booted a machine with wifi off. Therefor we should load it in INIT stage already. Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.a6077801d7d5.I7d8d5c895bc467efbf81ea055dde366ea01cced1@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: Read the PPAG and SAR tables at INIT stageMiri Korenblit5-57/+69
We used to read the PPAG, WRDS, EWRD, WGDS tables from ACPI in the load stage only. This prevented vendor commands from being executed before bringing the interface up. Move reading those tables to INIT stage. Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.ce3b60f0b426.I3643bf00e714aae930880cc7d6cf390b142eaccb@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: trigger WRT when no beacon heardShaul Triebitz1-0/+10
If the session protection ends but no beacon was heard, the driver triggers a disconnection. Trigger WRT in that case so it can be debugged. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.7bf71939826b.Id73f1a466929670f5ec54301227d68883afd9207@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: fw: correctly limit to monitor dumpJohannes Berg1-1/+1
In commit 79f033f6f229 ("iwlwifi: dbg: don't limit dump decisions to all or monitor") we changed the code to pass around a bitmap, but in the monitor_only case, one place accidentally used the bit number, not the bit mask, resulting in CSR and FW_INFO getting dumped instead of monitor data. Fix that. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.774fd8729a33.Ic985a787071d1c0b127ef0ba8367da896ee11f57@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: skip first element in the WTAS ACPI tableAbhishek Naik1-7/+7
By mistake we were considering the first element of the WTAS wifi package as part of the data we want to rid, but that element is the wifi package signature (always 0x07), so it should be skipped. Change the code to read the data starting from element 1 instead. Signed-off-by: Abhishek Naik <[email protected]> Fixes: 28dd7ccdc56f ("iwlwifi: acpi: read TAS table from ACPI and send it to the FW") Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.ff8148197b15.I70636c04e37b2b57a5df3ce611511f62203d27a7@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: mvm: support version 11 of wowlan statuses notificationGregory Greenman1-1/+4
The new version of the command has same size and layout as version 10. It just sends corresponding station id in one of the reserved fields. It's not used in the driver, so just be ready to accept version 11. Signed-off-by: Gregory Greenman <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.0a387598eef1.I3be0bbf603ef95c644218be8a12b329411f11646@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-08-26iwlwifi: convert flat GEO profile table to a struct versionLuca Coelho3-28/+45
The GEO profiles have been stored in single-dimension arrays and the access has been done via a single index. We will soon need to support different revisions of this table, which will make the flat array even harder to handle. To prepare for that, convert the single-dimension array to a struct with substructures. Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210805141826.56f3506411a2.I600ed3708d19f2263a5a8d143f6711d08499bbb0@changeid Signed-off-by: Luca Coelho <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.