aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-01scsi: mpt3sas: Increase IOCInit request timeout to 30sSreekanth Reddy1-1/+1
Currently the IOCInit request message timeout is set to 10s. This is not sufficient in some scenarios such as during HBA FW downgrade operations. Increase the IOCInit request timeout to 30s. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sreekanth Reddy <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-12-01scsi: mpt3sas: Fix ioctl timeoutSuganath Prabu S1-1/+1
Commit c1a6c5ac4278 ("scsi: mpt3sas: For NVME device, issue a protocol level reset") modified the ioctl path 'timeout' variable type to u8 from unsigned long, limiting the maximum timeout value that the driver can support to 255 seconds. If the management application is requesting a higher value the resulting timeout will be zero. The operation times out immediately and the ioctl request fails. Change datatype back to unsigned long. Link: https://lore.kernel.org/r/[email protected] Fixes: c1a6c5ac4278 ("scsi: mpt3sas: For NVME device, issue a protocol level reset") Cc: <[email protected]> #v4.18+ Signed-off-by: Suganath Prabu S <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-11-30scsi: storvsc: Validate length of incoming packet in ↵Andrea Parri (Microsoft)1-0/+5
storvsc_on_channel_callback() Check that the packet is of the expected size at least, don't copy data past the packet. Link: https://lore.kernel.org/r/[email protected] Cc: "James E.J. Bottomley" <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: [email protected] Reported-by: Saruhan Karademir <[email protected]> Signed-off-by: Andrea Parri (Microsoft) <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-11-30docs: bootconfig: Add the endianness of fieldsMasami Hiramatsu1-1/+3
Add a description about the endianness of the size and the checksum fields. Those must be stored as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583936246.547349.10964204130590955409.stgit@devnote2 Reported-by: Steven Rostedt <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30tools/bootconfig: Store size and checksum in footer as le32Masami Hiramatsu1-2/+5
Store the size and the checksum fields in the footer as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583935332.547349.5897811300636587426.stgit@devnote2 Reported-by: Steven Rostedt <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30bootconfig: Load size and checksum in the footer as le32Masami Hiramatsu1-2/+2
Load the size and the checksum fields in the footer as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583934457.547349.10504070298990791074.stgit@devnote2 Reported-by: Steven Rostedt <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30ring-buffer: Always check to put back before stamp when crossing pagesSteven Rostedt (VMware)1-8/+6
The current ring buffer logic checks to see if the updating of the event buffer was interrupted, and if it is, it will try to fix up the before stamp with the write stamp to make them equal again. This logic is flawed, because if it is not interrupted, the two are guaranteed to be different, as the current event just updated the before stamp before allocation. This guarantees that the next event (this one or another interrupting one) will think it interrupted the time updates of a previous event and inject an absolute time stamp to compensate. The correct logic is to always update the timestamps when traversing to a new sub buffer. Cc: [email protected] Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp") Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30scsi: storvsc: Fix error return in storvsc_probe()Jing Xiangfeng1-1/+3
Return -ENOMEM from the error handling case instead of 0. Link: https://lore.kernel.org/r/[email protected] Fixes: 436ad9413353 ("scsi: storvsc: Allow only one remove lun work item to be issued per lun") Reviewed-by: Michael Kelley <[email protected]> Signed-off-by: Jing Xiangfeng <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-11-30Merge tag 'linux-can-fixes-for-5.10-20201130' of ↵Jakub Kicinski5-15/+20
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-30 The first patch is by me an target the tcan4x5x bindings for the m_can driver. It fixes the error path in the tcan4x5x_can_probe() function. The next two patches are by Jeroen Hofstee and makes the lost of arbitration error counters of sja1000 and the sun4i drivers consistent with the other drivers. Zhang Qilong contributes two patch that clean up the error path in the c_can and kvaser_pciefd drivers. * tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling can: c_can: c_can_power_up(): fix error handling can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error can: sja1000: sja1000_err(): don't count arbitration lose as an error can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-30ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependencyNaveen N. Rao1-1/+1
DYNAMIC_FTRACE_WITH_DIRECT_CALLS should depend on DYNAMIC_FTRACE_WITH_REGS since we need ftrace_regs_caller(). Link: https://lkml.kernel.org/r/fc4b257ea8689a36f086d2389a9ed989496ca63a.1606412433.git.naveen.n.rao@linux.vnet.ibm.com Cc: [email protected] Fixes: 763e34e74bb7d5c ("ftrace: Add register_ftrace_direct()") Signed-off-by: Naveen N. Rao <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30ftrace: Fix updating FTRACE_FL_TRAMPNaveen N. Rao1-1/+21
On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in ftrace_get_addr_new() followed by the below message: Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001) The set of steps leading to this involved: - modprobe ftrace-direct-too - enable_probe - modprobe ftrace-direct - rmmod ftrace-direct <-- trigger The problem turned out to be that we were not updating flags in the ftrace record properly. From the above message about the trampoline accounting being bad, it can be seen that the ftrace record still has FTRACE_FL_TRAMP set though ftrace-direct module is going away. This happens because we are checking if any ftrace_ops has the FTRACE_FL_TRAMP flag set _before_ updating the filter hash. The fix for this is to look for any _other_ ftrace_ops that also needs FTRACE_FL_TRAMP. Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com Cc: [email protected] Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one") Signed-off-by: Naveen N. Rao <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30tracing: Fix alignment of static bufferMinchan Kim1-1/+1
With 5.9 kernel on ARM64, I found ftrace_dump output was broken but it had no problem with normal output "cat /sys/kernel/debug/tracing/trace". With investigation, it seems coping the data into temporal buffer seems to break the align binary printf expects if the static buffer is not aligned with 4-byte. IIUC, get_arg in bstr_printf expects that args has already right align to be decoded and seq_buf_bprintf says ``the arguments are saved in a 32bit word array that is defined by the format string constraints``. So if we don't keep the align under copy to temporal buffer, the output will be broken by shifting some bytes. This patch fixes it. Link: https://lkml.kernel.org/r/[email protected] Cc: <[email protected]> Fixes: 8e99cf91b99bb ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic") Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Minchan Kim <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30tracing: Remove WARN_ON in start_thread()Vasily Averin1-1/+1
This patch reverts commit 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists") .start hook can be legally called several times if according tracer is stopped screen window 1 [root@localhost ~]# echo 1 > /sys/kernel/tracing/events/kmem/kfree/enable [root@localhost ~]# echo 1 > /sys/kernel/tracing/options/pause-on-trace [root@localhost ~]# less -F /sys/kernel/tracing/trace screen window 2 [root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on 0 [root@localhost ~]# echo hwlat > /sys/kernel/debug/tracing/current_tracer [root@localhost ~]# echo 1 > /sys/kernel/debug/tracing/tracing_on [root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on 0 [root@localhost ~]# echo 2 > /sys/kernel/debug/tracing/tracing_on triggers warning in dmesg: WARNING: CPU: 3 PID: 1403 at kernel/trace/trace_hwlat.c:371 hwlat_tracer_start+0xc9/0xd0 Link: https://lkml.kernel.org/r/[email protected] Cc: Ingo Molnar <[email protected]> Cc: [email protected] Fixes: 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists") Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30samples/ftrace: Mark my_tramp[12]? globalSami Tolvanen3-0/+4
my_tramp[12]? are declared as global functions in C, but they are not marked global in the inline assembly definition. This mismatch confuses Clang's Control-Flow Integrity checking. Fix the definitions by adding .globl. Link: https://lkml.kernel.org/r/[email protected] Fixes: 9d907f1ae80b8 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()") Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Sami Tolvanen <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30vxlan: Copy needed_tailroom from lowerdevSven Eckelmann1-0/+2
While vxlan doesn't need any extra tailroom, the lowerdev might need it. In that case, copy it over to reduce the chance for additional (re)allocations in the transmit path. Signed-off-by: Sven Eckelmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-30vxlan: Add needed_headroom for lower deviceSven Eckelmann1-0/+1
It was observed that sending data via batadv over vxlan (on top of wireguard) reduced the performance massively compared to raw ethernet or batadv on raw ethernet. A check of perf data showed that the vxlan_build_skb was calling all the time pskb_expand_head to allocate enough headroom for: min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len + VXLAN_HLEN + iphdr_len; But the vxlan_config_apply only requested needed headroom for: lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM So it completely ignored the needed_headroom of the lower device. The first caller of net_dev_xmit could therefore never make sure that enough headroom was allocated for the rest of the transmit path. Cc: Annika Wickert <[email protected]> Signed-off-by: Sven Eckelmann <[email protected]> Tested-by: Annika Wickert <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-30chelsio/chtls: fix panic during unload reload chtlsVinay Kumar Yadav1-0/+1
there is kernel panic in inet_twsk_free() while chtls module unload when socket is in TIME_WAIT state because sk_prot_creator was not preserved on connection socket. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Udai Sharma <[email protected]> Signed-off-by: Vinay Kumar Yadav <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-30drm/i915/gt: Program mocs:63 for cache eviction on gen9Chris Wilson1-1/+13
Ville noticed that the last mocs entry is used unconditionally by the HW when it performs cache evictions, and noted that while the value is not meant to be writable by the driver, we should program it to a reasonable value nevertheless. As it turns out, we can change the value of mocs:63 and the value we were programming into it would cause hard hangs in conjunction with atomic operations. v2: Add details from bspec about how it is used by HW Suggested-by: Ville Syrjälä <[email protected]> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2707 Fixes: 3bbaba0ceaa2 ("drm/i915: Added Programming of the MOCS") Signed-off-by: Chris Wilson <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: Jason Ekstrand <[email protected]> Cc: <[email protected]> # v4.3+ Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 977933b5da7c16f39295c4c1d4259a58ece65dbe) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-12-01gfs2: Fix deadlock between gfs2_{create_inode,inode_lookup} and delete_work_funcAndreas Gruenbacher1-10/+11
In gfs2_create_inode and gfs2_inode_lookup, make sure to cancel any pending delete work before taking the inode glock. Otherwise, gfs2_cancel_delete_work may block waiting for delete_work_func to complete, and delete_work_func may block trying to acquire the inode glock in gfs2_inode_lookup. Reported-by: Alexander Aring <[email protected]> Fixes: a0e3cc65fa29 ("gfs2: Turn gl_delete into a delayed work") Cc: [email protected] # v5.8+ Signed-off-by: Andreas Gruenbacher <[email protected]>
2020-11-30cifs: fix potential use-after-free in cifs_echo_request()Paulo Alcantara1-0/+2
This patch fixes a potential use-after-free bug in cifs_echo_request(). For instance, thread 1 -------- cifs_demultiplex_thread() clean_demultiplex_info() kfree(server) thread 2 (workqueue) -------- apic_timer_interrupt() smp_apic_timer_interrupt() irq_exit() __do_softirq() run_timer_softirq() call_timer_fn() cifs_echo_request() <- use-after-free in server ptr Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> CC: Stable <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2020-11-30cifs: allow syscalls to be restarted in __smb_send_rqst()Paulo Alcantara1-2/+2
A customer has reported that several files in their multi-threaded app were left with size of 0 because most of the read(2) calls returned -EINTR and they assumed no bytes were read. Obviously, they could have fixed it by simply retrying on -EINTR. We noticed that most of the -EINTR on read(2) were due to real-time signals sent by glibc to process wide credential changes (SIGRT_1), and its signal handler had been established with SA_RESTART, in which case those calls could have been automatically restarted by the kernel. Let the kernel decide to whether or not restart the syscalls when there is a signal pending in __smb_send_rqst() by returning -ERESTARTSYS. If it can't, it will return -EINTR anyway. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> CC: Stable <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2020-11-30ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()Andrea Righi1-3/+3
In the slow path of __rb_reserve_next() a nested event(s) can happen between evaluating the timestamp delta of the current event and updating write_stamp via local_cmpxchg(); in this case the delta is not valid anymore and it should be set to 0 (same timestamp as the interrupting event), since the event that we are currently processing is not the last event in the buffer. Link: https://lkml.kernel.org/r/X8IVJcp1gRE+FJCJ@xps-13-7390 Cc: Ingo Molnar <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Link: https://lwn.net/Articles/831207 Fixes: a389d86f7fd0 ("ring-buffer: Have nested events still record running time stamp") Signed-off-by: Andrea Righi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30ring-buffer: Update write stamp with the correct tsSteven Rostedt (VMware)1-1/+1
The write stamp, used to calculate deltas between events, was updated with the stale "ts" value in the "info" structure, and not with the updated "ts" variable. This caused the deltas between events to be inaccurate, and when crossing into a new sub buffer, had time go backwards. Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp") Reported-by: "J. Avila" <[email protected]> Tested-by: Daniel Mentz <[email protected]> Tested-by: Will McVicker <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30io_uring: fix recvmsg setup with compat buf-selectPavel Begunkov1-1/+2
__io_compat_recvmsg_copy_hdr() with REQ_F_BUFFER_SELECT reads out iov len but never assigns it to iov/fast_iov, leaving sr->len with garbage. Hopefully, following io_buffer_select() truncates it to the selected buffer size, but the value is still may be under what was specified. Cc: <[email protected]> # 5.7 Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-11-30arm64: mte: Fix typo in macro definitionVincenzo Frascino1-1/+1
UL in the definition of SYS_TFSR_EL1_TF1 was misspelled causing compilation issues when trying to implement in kernel MTE async mode. Fix the macro correcting the typo. Note: MTE async mode will be introduced with a future series. Fixes: c058b1c4a5ea ("arm64: mte: system register definitions") Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Vincenzo Frascino <[email protected]> Acked-by: Catalin Marinas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30Merge tag 'misc-habanalabs-fixes-2020-11-30' of ↵Greg Kroah-Hartman2-8/+9
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-linus Oded writes: This tag contains two bug fixes for v5.10-rc7: - Memory leak every time a user closes the file-descriptor of the device. The driver didn't always free all the VA range structures it maintains per user. - Memory leak every time the driver was removed. The device structure was not "put" at the device's teardown function in the driver. * tag 'misc-habanalabs-fixes-2020-11-30' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: habanalabs: put devices before driver removal habanalabs: free host huge va_range if not used
2020-11-30Merge tag 'thunderbolt-for-v5.10-rc7' of ↵Greg Kroah-Hartman1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fix for v5.10-rc7 This includes a single fix for use-after-free bug after resume from hibernation. * tag 'thunderbolt-for-v5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Fix use-after-free in remove_unplugged_switch()
2020-11-30arm64: entry: fix EL1 debug transitionsMark Rutland2-25/+26
In debug_exception_enter() and debug_exception_exit() we trace hardirqs on/off while RCU isn't guaranteed to be watching, and we don't save and restore the hardirq state, and so may return with this having changed. Handle this appropriately with new entry/exit helpers which do the bare minimum to ensure this is appropriately maintained, without marking debug exceptions as NMIs. These are placed in entry-common.c with the other entry/exit helpers. In future we'll want to reconsider whether some debug exceptions should be NMIs, but this will require a significant refactoring, and for now this should prevent issues with lockdep and RCU. Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marins <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: entry: fix NMI {user, kernel}->kernel transitionsMark Rutland4-10/+48
Exceptions which can be taken at (almost) any time are consdiered to be NMIs. On arm64 that includes: * SDEI events * GICv3 Pseudo-NMIs * Kernel stack overflows * Unexpected/unhandled exceptions ... but currently debug exceptions (BRKs, breakpoints, watchpoints, single-step) are not considered NMIs. As these can be taken at any time, kernel features (lockdep, RCU, ftrace) may not be in a consistent kernel state. For example, we may take an NMI from the idle code or partway through an entry/exit path. While nmi_enter() and nmi_exit() handle most of this state, notably they don't save/restore the lockdep state across an NMI being taken and handled. When interrupts are enabled and an NMI is taken, lockdep may see interrupts become disabled within the NMI code, but not see interrupts become enabled when returning from the NMI, leaving lockdep believing interrupts are disabled when they are actually disabled. The x86 code handles this in idtentry_{enter,exit}_nmi(), which will shortly be moved to the generic entry code. As we can't use either yet, we copy the x86 approach in arm64-specific helpers. All the NMI entrypoints are marked as noinstr to prevent any instrumentation handling code being invoked before the state has been corrected. Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: entry: fix non-NMI kernel<->kernel transitionsMark Rutland2-3/+67
There are periods in kernel mode when RCU is not watching and/or the scheduler tick is disabled, but we can still take exceptions such as interrupts. The arm64 exception handlers do not account for this, and it's possible that RCU is not watching while an exception handler runs. The x86/generic entry code handles this by ensuring that all (non-NMI) kernel exception handlers call irqentry_enter() and irqentry_exit(), which handle RCU, lockdep, and IRQ flag tracing. We can't yet move to the generic entry code, and already hadnle the user<->kernel transitions elsewhere, so we add new kernel<->kernel transition helpers alog the lines of the generic entry code. Since we now track interrupts becoming masked when an exception is taken, local_daif_inherit() is modified to track interrupts becoming re-enabled when the original context is inherited. To balance the entry/exit paths, each handler masks all DAIF exceptions before exit_to_kernel_mode(). Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: ptrace: prepare for EL1 irq/rcu trackingMark Rutland1-0/+4
Exceptions from EL1 may be taken when RCU isn't watching (e.g. in idle sequences), or when the lockdep hardirqs transiently out-of-sync with the hardware state (e.g. in the middle of local_irq_enable()). To correctly handle these cases, we'll need to save/restore this state across some exceptions taken from EL1. A series of subsequent patches will update EL1 exception handlers to handle this. In preparation for this, and to avoid dependencies between those patches, this patch adds two new fields to struct pt_regs so that exception handlers can track this state. Note that this is placed in pt_regs as some entry/exit sequences such as el1_irq are invoked from assembly, which makes it very difficult to add a separate structure as with the irqentry_state used by x86. We can separate this once more of the exception logic is moved to C. While the fields only need to be bool, they are both made u64 to keep pt_regs 16-byte aligned. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: entry: fix non-NMI user<->kernel transitionsMark Rutland5-48/+51
When built with PROVE_LOCKING, NO_HZ_FULL, and CONTEXT_TRACKING_FORCE will WARN() at boot time that interrupts are enabled when we call context_tracking_user_enter(), despite the DAIF flags indicating that IRQs are masked. The problem is that we're not tracking IRQ flag changes accurately, and so lockdep believes interrupts are enabled when they are not (and vice-versa). We can shuffle things so to make this more accurate. For kernel->user transitions there are a number of constraints we need to consider: 1) When we call __context_tracking_user_enter() HW IRQs must be disabled and lockdep must be up-to-date with this. 2) Userspace should be treated as having IRQs enabled from the PoV of both lockdep and tracing. 3) As context_tracking_user_enter() stops RCU from watching, we cannot use RCU after calling it. 4) IRQ flag tracing and lockdep have state that must be manipulated before RCU is disabled. ... with similar constraints applying for user->kernel transitions, with the ordering reversed. The generic entry code has enter_from_user_mode() and exit_to_user_mode() helpers to handle this. We can't use those directly, so we add arm64 copies for now (without the instrumentation markers which aren't used on arm64). These replace the existing user_exit() and user_exit_irqoff() calls spread throughout handlers, and the exception unmasking is left as-is. Note that: * The accounting for debug exceptions from userspace now happens in el0_dbg() and ret_to_user(), so this is removed from debug_exception_enter() and debug_exception_exit(). As user_exit_irqoff() wakes RCU, the userspace-specific check is removed. * The accounting for syscalls now happens in el0_svc(), el0_svc_compat(), and ret_to_user(), so this is removed from el0_svc_common(). This does not adversely affect the workaround for erratum 1463225, as this does not depend on any of the state tracking. * In ret_to_user() we mask interrupts with local_daif_mask(), and so we need to inform lockdep and tracing. Here a trace_hardirqs_off() is sufficient and safe as we have not yet exited kernel context and RCU is usable. * As PROVE_LOCKING selects TRACE_IRQFLAGS, the ifdeferry in entry.S only needs to check for the latter. * EL0 SError handling will be dealt with in a subsequent patch, as this needs to be treated as an NMI. Prior to this patch, booting an appropriately-configured kernel would result in spats as below: | DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled()) | WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5280 check_flags.part.54+0x1dc/0x1f0 | Modules linked in: | CPU: 2 PID: 1 Comm: init Not tainted 5.10.0-rc3 #3 | Hardware name: linux,dummy-virt (DT) | pstate: 804003c5 (Nzcv DAIF +PAN -UAO -TCO BTYPE=--) | pc : check_flags.part.54+0x1dc/0x1f0 | lr : check_flags.part.54+0x1dc/0x1f0 | sp : ffff80001003bd80 | x29: ffff80001003bd80 x28: ffff66ce801e0000 | x27: 00000000ffffffff x26: 00000000000003c0 | x25: 0000000000000000 x24: ffffc31842527258 | x23: ffffc31842491368 x22: ffffc3184282d000 | x21: 0000000000000000 x20: 0000000000000001 | x19: ffffc318432ce000 x18: 0080000000000000 | x17: 0000000000000000 x16: ffffc31840f18a78 | x15: 0000000000000001 x14: ffffc3184285c810 | x13: 0000000000000001 x12: 0000000000000000 | x11: ffffc318415857a0 x10: ffffc318406614c0 | x9 : ffffc318415857a0 x8 : ffffc31841f1d000 | x7 : 647261685f706564 x6 : ffffc3183ff7c66c | x5 : ffff66ce801e0000 x4 : 0000000000000000 | x3 : ffffc3183fe00000 x2 : ffffc31841500000 | x1 : e956dc24146b3500 x0 : 0000000000000000 | Call trace: | check_flags.part.54+0x1dc/0x1f0 | lock_is_held_type+0x10c/0x188 | rcu_read_lock_sched_held+0x70/0x98 | __context_tracking_enter+0x310/0x350 | context_tracking_enter.part.3+0x5c/0xc8 | context_tracking_user_enter+0x6c/0x80 | finish_ret_to_user+0x2c/0x13cr Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: entry: move el1 irq/nmi logic to CMark Rutland4-45/+22
In preparation for reworking the EL1 irq/nmi entry code, move the existing logic to C. We no longer need the asm_nmi_enter() and asm_nmi_exit() wrappers, so these are removed. The new C functions are marked noinstr, which prevents compiler instrumentation and runtime probing. In subsequent patches we'll want the new C helpers to be called in all cases, so we don't bother wrapping the calls with ifdeferry. Even when the new C functions are stubs the trivial calls are unlikely to have a measurable impact on the IRQ or NMI paths anyway. Prototypes are added to <asm/exception.h> as otherwise (in some configurations) GCC will complain about the lack of a forward declaration. We already do this for existing function, e.g. enter_from_user_mode(). The new helpers are marked as noinstr (which prevents all instrumentation, tracing, and kprobes). Otherwise, there should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: entry: prepare ret_to_user for function callMark Rutland1-4/+5
In a subsequent patch ret_to_user will need to make a C function call (in some configurations) which may clobber x0-x18 at the start of the finish_ret_to_user block, before enable_step_tsk consumes the flags loaded into x1. In preparation for this, let's load the flags into x19, which is preserved across C function calls. This avoids a redundant reload of the flags and ensures we operate on a consistent shapshot regardless. There should be no functional change as a result of this patch. At this point of the entry/exit paths we only need to preserve x28 (tsk) and the sp, and x19 is free for this use. Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: entry: move enter_from_user_mode to entry-common.cMark Rutland2-7/+6
In later patches we'll want to extend enter_from_user_mode() and add a corresponding exit_to_user_mode(). As these will be common for all entries/exits from userspace, it'd be better for these to live in entry-common.c with the rest of the entry logic. This patch moves enter_from_user_mode() into entry-common.c. As with other functions in entry-common.c it is marked as noinstr (which prevents all instrumentation, tracing, and kprobes) but there are no other functional changes. Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: entry: mark entry code as noinstrMark Rutland1-50/+25
Functions in entry-common.c are marked as notrace and NOKPROBE_SYMBOL(), but they're still subject to other instrumentation which may rely on lockdep/rcu/context-tracking being up-to-date, and may cause nested exceptions (e.g. for WARN/BUG or KASAN's use of BRK) which will corrupt exceptions registers which have not yet been read. Prevent this by marking all functions in entry-common.c as noinstr to prevent compiler instrumentation. This also blacklists the functions for tracing and kprobes, so we don't need to handle that separately. Functions elsewhere will be dealt with in subsequent patches. Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: mark idle code as noinstrMark Rutland1-4/+4
Core code disables RCU when calling arch_cpu_idle(), so it's not safe for arch_cpu_idle() or its calees to be instrumented, as the instrumentation callbacks may attempt to use RCU or other features which are unsafe to use in this context. Mark them noinstr to prevent issues. The use of local_irq_enable() in arch_cpu_idle() is similarly problematic, and the "sched/idle: Fix arch_cpu_idle() vs tracing" patch queued in the tip tree addresses that case. Reported-by: Marco Elver <[email protected]> Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30arm64: syscall: exit userspace before unmasking exceptionsMark Rutland1-1/+1
In el0_svc_common() we unmask exceptions before we call user_exit(), and so there's a window where an IRQ or debug exception can be taken while RCU is not watching. In do_debug_exception() we account for this in via debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we call trace functions which rely on RCU before we have a guarantee that RCU is watching. Let's avoid this by having el0_svc_common() exit userspace before unmasking exceptions, matching what we do for all other EL0 entry paths. We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ flags while we're sure exceptions are masked in DAIF. The workaround for Cortex-A76 erratum 1463225 may trigger a debug exception before this point, but the debug code invoked in this case is safe even when RCU is not watching. Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-11-30can: kvaser_pciefd: kvaser_pciefd_open(): fix error handlingZhang Qilong1-1/+3
If kvaser_pciefd_bus_on() failed, we should call close_candev() to avoid reference leak. Fixes: 26ad340e582d3 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Zhang Qilong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-30can: c_can: c_can_power_up(): fix error handlingZhang Qilong1-4/+14
In the error handling in c_can_power_up(), there are two bugs: 1) c_can_pm_runtime_get_sync() will increase usage counter if device is not empty. Forgetting to call c_can_pm_runtime_put_sync() will result in a reference leak here. 2) c_can_reset_ram() operation will set start bit when enable is true. We should clear it in the error handling. We fix it by adding c_can_pm_runtime_put_sync() for 1), and c_can_reset_ram(enable is false) for 2) in the error handling. Fixes: 8212003260c60 ("can: c_can: Add d_can suspend resume support") Fixes: 52cde85acc23f ("can: c_can: Add d_can raminit support") Signed-off-by: Zhang Qilong <[email protected]> Link: https://lore.kernel.org/r/[email protected] [mkl: return "0" instead of "ret"] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-30can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an errorJeroen Hofstee1-1/+0
Losing arbitration is normal in a CAN-bus network, it means that a higher priority frame is being send and the pending message will be retried later. Hence most driver only increment arbitration_lost, but the sun4i driver also incremeants tx_error, causing errors to be reported on a normal functioning CAN-bus. So stop counting them as errors. Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Signed-off-by: Jeroen Hofstee <[email protected]> Link: https://lore.kernel.org/r/[email protected] [mkl: split into two seperate patches] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-30can: sja1000: sja1000_err(): don't count arbitration lose as an errorJeroen Hofstee1-1/+0
Losing arbitration is normal in a CAN-bus network, it means that a higher priority frame is being send and the pending message will be retried later. Hence most driver only increment arbitration_lost, but the sja1000 driver also incremeants tx_error, causing errors to be reported on a normal functioning CAN-bus. So stop counting them as errors. Fixes: 8935f57e68c4 ("can: sja1000: fix network statistics update") Signed-off-by: Jeroen Hofstee <[email protected]> Link: https://lore.kernel.org/r/[email protected] [mkl: split into two seperate patches] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-30can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous ↵Marc Kleine-Budde1-8/+3
clk_disable_unprepare() The clocks mcan_class->cclk and mcan_class->hclk are not prepared by any call during tcan4x5x_can_probe(), so remove erroneous clk_disable_unprepare() on them. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Link: http://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-30powerpc/pseries: Pass MSI affinity to irq_create_mapping()Laurent Vivier1-1/+2
With virtio multiqueue, normally each queue IRQ is mapped to a CPU. Commit 0d9f0a52c8b9f ("virtio_scsi: use virtio IRQ affinity") exposed an existing shortcoming of the arch code by moving virtio_scsi to the automatic IRQ affinity assignment. The affinity is correctly computed in msi_desc but this is not applied to the system IRQs. It appears the affinity is correctly passed to rtas_setup_msi_irqs() but lost at this point and never passed to irq_domain_alloc_descs() (see commit 06ee6d571f0e ("genirq: Add affinity hint to irq allocation")) because irq_create_mapping() doesn't take an affinity parameter. Use the new irq_create_mapping_affinity() function, which allows to forward the affinity setting from rtas_setup_msi_irqs() to irq_domain_alloc_descs(). With this change, the virtqueues are correctly dispatched between the CPUs on pseries. Fixes: e75eafb9b039 ("genirq/msi: Switch to new irq spreading infrastructure") Signed-off-by: Laurent Vivier <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Acked-by: Michael Ellerman <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-11-30genirq/irqdomain: Add an irq_create_mapping_affinity() functionLaurent Vivier2-7/+18
There is currently no way to convey the affinity of an interrupt via irq_create_mapping(), which creates issues for devices that expect that affinity to be managed by the kernel. In order to sort this out, rename irq_create_mapping() to irq_create_mapping_affinity() with an additional affinity parameter that can be passed down to irq_domain_alloc_descs(). irq_create_mapping() is re-implemented as a wrapper around irq_create_mapping_affinity(). No functional change. Fixes: e75eafb9b039 ("genirq/msi: Switch to new irq spreading infrastructure") Signed-off-by: Laurent Vivier <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-11-30drm/omap: sdi: fix bridge enable/disableTomi Valkeinen1-6/+4
When the SDI output was converted to DRM bridge, the atomic versions of enable and disable funcs were used. This was not intended, as that would require implementing other atomic funcs too. This leads to: WARNING: CPU: 0 PID: 18 at drivers/gpu/drm/drm_bridge.c:708 drm_atomic_helper_commit_modeset_enables+0x134/0x268 and display not working. Fix this by using the legacy enable/disable funcs. Fixes: 8bef8a6d5da81b909a190822b96805a47348146f ("drm/omap: sdi: Register a drm_bridge") Reported-by: Aaro Koskinen <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]> Tested-by: Ivaylo Dimitrov <[email protected]> Tested-by: Aaro Koskinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Cc: [email protected] # v5.7+ Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-30MAINTAINERS: Move Jason Cooper to CREDITSMarc Zyngier2-4/+5
Jason's email address has now been bouncing for weeks, and no reply was received when trying to reach out on other addresses. We really hope he is OK. But until we hear of his whereabouts, let's move him to the CREDITS file so that people stop Cc-ing him. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Gregory CLEMENT <[email protected]> Acked-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-30habanalabs: put devices before driver removalOfir Bitton1-8/+8
Driver never puts its device and control_device objects, hence a memory leak is introduced every driver removal. Signed-off-by: Ofir Bitton <[email protected]> Reviewed-by: Oded Gabbay <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
2020-11-30habanalabs: free host huge va_range if not usedOfir Bitton1-0/+1
If huge range is not valid, driver uses the host range also for huge page allocations, but driver never frees its allocation. This introduces a memory leak every time a user closes its context. Signed-off-by: Ofir Bitton <[email protected]> Reviewed-by: Oded Gabbay <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
2020-11-30speakup: Reject setting the speakup line discipline outside of speakupSamuel Thibault1-14/+23
Speakup exposing a line discipline allows userland to try to use it, while it is deemed to be useless, and thus uselessly exposes potential bugs. One of them is simply that in such a case if the line sends data, spk_ttyio_receive_buf2 is called and crashes since spk_ttyio_synth is NULL. This change restricts the use of the speakup line discipline to speakup drivers, thus avoiding such kind of issues altogether. Cc: [email protected] Reported-by: Shisong Qin <[email protected]> Signed-off-by: Samuel Thibault <[email protected]> Tested-by: Shisong Qin <[email protected]> Link: https://lore.kernel.org/r/20201129193523.hm3f6n5xrn6fiyyc@function Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.