aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-02-03scsi: aacraid: update versionRaghava Aditya Renukunta1-2/+2
Update the driver version to 50740 Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Change Driver Version PrefixRaghava Aditya Renukunta1-1/+1
Change the aacraid driver prefix from 1.2-1 to 1.2.1 Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Update copyrightsRaghava Aditya Renukunta12-11/+59
Added new copyright messages Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Retrieve HBA host information ioctlRaghava Aditya Renukunta2-0/+78
Added a new ioctl interface to retrieve the host device information. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added ioctl to trigger IOP/IWBR resetRaghava Aditya Renukunta2-0/+20
Added a new ioctl interface to trigger an IOP or IWBR reset from ioctl. Primary used by management utility to trigger resets. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added new IWBR resetRaghava Aditya Renukunta7-54/+133
Added a new IWBR soft reset type, reworked the IOP reset interface for a bit. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: VPD 83 type3 supportRaghava Aditya Renukunta3-63/+150
This patch adds support to retrieve the unique identifier data (VPD page 83 type3) for Logical drives created on SmartIOC 2000 products. In addition added a sysfs device structure to expose the id information. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added support to abort cmd and reset lunRaghava Aditya Renukunta3-88/+346
Added task management command support to abort any timed out commands in case of a eh_abort call and to reset lun's in case of eh_reset call. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Add task management functionalityRaghava Aditya Renukunta1-4/+362
Added support to send out task management commands. [mkp: removed // fibsize... ] Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Include HBA direct interfaceRaghava Aditya Renukunta6-189/+669
Added support to send direct pasthru srb commands from management utilty to the controller. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added support for hotplugRaghava Aditya Renukunta3-7/+160
Added support for drive hotplug add and removal Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added support to set QD of attached drivesRaghava Aditya Renukunta1-31/+71
Added support to set qd of drives in slave_configure.This only works for HBA1000 attached drives. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Retrieve Queue Depth from Adapter FWRaghava Aditya Renukunta2-2/+157
Retrieved queue depth from fw and saved it for future use. Only applicable for HBA1000 drives. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added support for periodic wellness syncRaghava Aditya Renukunta2-31/+151
This patch adds a new functions that periodically sync the time of host to the adapter. In addition also informs the adapter that the driver is alive and kicking. Only applicable to the HBA1000 and SMARTIOC2000. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Reworked aac_command_threadRaghava Aditya Renukunta1-194/+274
Reworked aac_command_thread into aac_process_events Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added support for read medium errorRaghava Aditya Renukunta2-0/+11
This patch processes Raw IO read medium errors. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added support for response pathRaghava Aditya Renukunta5-62/+99
This patch enables the driver to actually process the I/O, or srb replies from adapter. In addition to any HBA1000 or SmartIOC2000 adapter events. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Process Error for response I/ORaghava Aditya Renukunta1-138/+151
Make sure that the driver processes error conditions even in the fast response path for response from the adapter. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Reworked scsi command submission pathRaghava Aditya Renukunta1-102/+70
Moved the READ and WRITE switch cases to the top. Added a default case to the switch case and replaced duplicate scsi result value with a macro. The idea is that since most of scsi commands we care about performance wise are read or write, we need to process them first. Internally the compiler (GCC) converts a switch case into either a jump table or a bunch of if else conditions, so placing the often used read, write cases at the top is an effort in optimization. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Retrieve and update the device typesRaghava Aditya Renukunta2-2/+202
This patch adds support to retrieve the type of each adapter connected device. Applicable to HBA1000 and SmartIOC2000 products Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added sa firmware supportRaghava Aditya Renukunta3-59/+45
sa_firmware adds the capability to differentiate the new SmartIOC family of adapters from the series 8 and below. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: added support for init_struct_8Raghava Aditya Renukunta9-138/+261
This patch lays the groundwork for supporting the new HBA-1000 controller family.A new INIT structure INIT_STRUCT_8 has been added which allows for a variable size for MSI-x vectors among other things, and is used for both Series-8, HBA-1000 and SmartIOC-2000. Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Added aacraid.h include guardRaghava Aditya Renukunta1-0/+3
Added aacraid.h include guard Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-02-03scsi: aacraid: Remove duplicate irq management codeRaghava Aditya Renukunta1-55/+3
Removed duplicate code that for acquiring and releasing irqs Signed-off-by: Raghava Aditya Renukunta <[email protected]> Signed-off-by: Dave Carroll <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: scsi_debug: Add OPTIMAL TRANSFER LENGTH GRANULARITY option.Lukas Herbolt1-1/+9
[mkp: whitespace fixes] Signed-off-by: Lukas Herbolt <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: mpt3sas: Updating driver version to v15.100.00.00Chaitra P B1-3/+3
Updated driver version to "15.100.00.00" Signed-off-by: Chaitra P B <[email protected]> Signed-off-by: Suganath Prabu S <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: mpt3sas: Fix Firmware fault state 0x2100 during heavy 4K RR FIO stress ↵Chaitra P B1-0/+19
test. Due existence of loop in the IO path our HBA will receive heavy IOs and also as driver is not updating the Reply Post Host Index frequently, So there will be a high chance that our Firmware unable to find any free entry in the Reply Post Descriptor Queue (i.e. Queue overflow occurs) and can observe 0x2100 firmware fault. So to fix this, we have defined a thresh hold value. After continuously processing this thresh hold number of reply descriptors driver will update the Reply Descriptor Host Index so that this thresh hold number of reply descriptors entries will be freed and these entries will be available for firmware and we won't observe this Firmware fault. We have defined this threshold value as 1/3rd of the hba queue depth. Signed-off-by: Chaitra P B <[email protected]> Signed-off-by: Suganath Prabu S <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: mpt3sas: Fix for Crusader to achieve product targets with SAS devices.Chaitra P B4-4/+33
Small glitch/degraded performance in Crusader is improved with SAS drives by removing unnecessary spinlocks while clearing scsi command in drivers internal lookup table. Signed-off-by: Chaitra P B <[email protected]> Signed-off-by: Suganath Prabu S <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: mpt3sas: Added print to notify cable running at a degraded speed.Chaitra P B2-8/+19
Driver processes the event MPI26_EVENT_ACTIVE_CABLE_DEGRADED when a cable is present and is running at a degraded speed (below the SAS3 12 Gb/s rate). Prints added to inform the user that the cable is not running at optimal speed. Signed-off-by: Chaitra P B <[email protected]> Signed-off-by: Suganath Prabu S <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: hpsa: remove coalescing settings for ioaccel2Don Brace1-6/+2
- Setting coalescing has a significant negative impact on low queue-depth performance. - Does not help high queue-depth performance. Signed-off-by: Don Brace <[email protected]> Reviewed-by: Scott Benesh <[email protected]> Reviewed-by: Scott Teel <[email protected]> Reviewed-by: Kevin Barnett <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: storvsc: remove bogus code to transfer struct scatterlistChristoph Hellwig1-7/+0
Remove a piece of code in storvsc_queuecommand that tries to pass the physical address of the kernel struct scatterlist pointer to the host. Fortunately the code can't ever be reached anyway. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Reviewed-by: K. Y. Srinivasan <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: atari_scsi: Reset DMA during bus reset only under ST-DMA lockFinn Thain1-1/+2
The atari_scsi driver should not access Falcon DMA chip registers unless it has acquired exclusive access to that chip. If the driver doesn't have exclusive access then there's no need for a DMA reset as there are no scsi commands in progress. Signed-off-by: Finn Thain <[email protected]> Tested-by: Ondrej Zary <[email protected]> Tested-by: Michael Schmitz <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: ncr5380: Improve target selection robustnessFinn Thain1-1/+9
Handle timeout or bus phase change errors that could occur when sending the IDENTIFY message. Signed-off-by: Finn Thain <[email protected]> Tested-by: Ondrej Zary <[email protected]> Tested-by: Michael Schmitz <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: ncr5380: Resolve various static checker warningsFinn Thain3-6/+9
Avoid various warnings from "make C=1" by annotating a couple of unlock-then-lock sequences, replacing a zero with NULL and correcting some type casts. Also avoid a warning from "make W=1" by adding braces. Signed-off-by: Finn Thain <[email protected]> Tested-by: Ondrej Zary <[email protected]> Tested-by: Michael Schmitz <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: ncr5380: Reduce #include filesFinn Thain4-161/+122
The NCR5380 wrapper drivers don't export symbols or declarations and don't actually need separate header files. Most of these header files were removed already; only sun3_scsi.h and g_NCR5380.h remain. Move the remaining definitions to the corresponding .c files to improve readability and proximity. The #defines which influence the #included core driver are no longer mixed up with unrelated #defines and #includes. Signed-off-by: Finn Thain <[email protected]> Tested-by: Ondrej Zary <[email protected]> Tested-by: Michael Schmitz <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: ncr5380: Clean up dead code and redundant macro usageFinn Thain3-41/+0
Remove dead code inside #if 0 conditionals. Remove the #ifdef __KERNEL__ test, since NCR5380.h has no definitions that relate to userspace code. Remove two redundant macro definitions which were overlooked in commit e9db3198e08b ("sun3_scsi: Adopt NCR5380.c core driver"). Signed-off-by: Finn Thain <[email protected]> Tested-by: Ondrej Zary <[email protected]> Tested-by: Michael Schmitz <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-31scsi: ncr5380: Shorten host info string by removing unused option macrosFinn Thain2-49/+10
The DIFFERENTIAL and PARITY option macros are unused: no supported hardware uses differential signalling and the core driver never implemented parity checking. These options just waste space in the host info string. While we are here, fix a typo in the NCR5380_info() kernel-doc comment. Signed-off-by: Finn Thain <[email protected]> Tested-by: Ondrej Zary <[email protected]> Tested-by: Michael Schmitz <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: hisi_sas: decrease running_req in hisi_sas_slot_task_free()Xiang Chen2-6/+4
There is an issue that hisi_sas_dev.running_req is not decremented properly for internal abort and TMF. To resolve, only decrease running_req in hisi_sas_slot_task_free() Signed-off-by: Xiang Chen <[email protected]> Signed-off-by: John Garry <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: hisi_sas: fix probe ordering problemXiang Chen2-10/+6
There is a potential probe issue in how we trigger the hw initialisation. Although we use 1s timer to delay hw initialisation, there is still a potential that sas_register_ha() is not be finished before we start the PHY init from hw->hw_init(). To avoid this issue, initialise the hw after sas_register_ha() in the same probe context. Note: it is not necessary to use 1s timer now (modified v2 hw only). Signed-off-by: Xiang Chen <[email protected]> Signed-off-by: John Garry <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: hisi_sas: downgrade internal abort exit printJohn Garry1-1/+1
Downgrade the exit print in hisi_sas_internal_task_abort() to dbg level, as info is not required. Signed-off-by: John Garry <[email protected]> Reviewed-by: Xiang Chen <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: hisi_sas: modify hard reset for directed-attached diskXiang Chen1-0/+10
Correctly set registers in v2 for root PHY hardreset for directly attached disk. Signed-off-by: Xiang Chen <[email protected]> Signed-off-by: John Garry <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: hisi_sas: downgrade refclk messageJohn Garry1-1/+1
The message to inform that the controller has no refclk is currently at warning level, which is unnecessary, so downgrade to debug. Signed-off-by: John Garry <[email protected]> Reviewed-by: Xiang Chen <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: hisi_sas: modify some values of ITCT tableXiang Chen1-4/+10
Set SMP connection timeout and continue AWT timer; Clear ITCT table when dev gone. Signed-off-by: Xiang Chen <[email protected]> Signed-off-by: John Garry <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: hisi_sas: workaround v2 hw SATA IO timeout issueXiang Chen1-1/+74
The v2 SAS controller needs more time to detect channel idle and send setup link request than SATA disk does, so it is difficult for the SAS controller to setup an STP link. Therefore it may cause some IO timeouts. We need to periodically configure the SAS controller so it doesn't receive STP setup requests from SATA disks for a while, so IO can be sent during this period. Signed-off-by: Xiang Chen <[email protected]> Signed-off-by: John Garry <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: lpfc: Fix lpfc_wwn_set return code checkJames Smart1-2/+2
When I reversed the patch to re-add the lpfc_soft_wwn parameter feature, it re-added code that had a long-standing bug. (that's what I get I guess :) As Dan Carpenter pointed out - error checks looked at wrong polarity. 0 is success, -errno is failure. Updated checks. Signed-off-by: James Smart <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: sd: Cleaned up comment references to @sdp argument explanation.John Pittman1-2/+2
In sd.c there are two comment references to 'struct scsi_device *sdp' as an argument. One of the references has a typo and the other should be a reference to 'struct device *dev' instead. Fixed by correcting the typo in the first and changing the explanation in the second. Signed-off-by: John Pittman <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: be2iscsi: Use GFP_ATOMIC under spin lockWei Yongjun1-1/+1
A spin lock is taken here so we should use GFP_ATOMIC. Fixes: 987132167f4b ("scsi: be2iscsi: Fix for crash in beiscsi_eh_device_reset") Signed-off-by: Wei Yongjun <[email protected]> Reviewed-by: Jitendra Bhivare <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-20scsi: lpfc: Replace BUG() with BUG_ON()Shyam Saini1-2/+1
Replace BUG() with BUG_ON() using coccinelle. Signed-off-by: Shyam Saini <[email protected]> Acked-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-11scsi: qla4xxx: remove two unused MSI-X related #definesChristoph Hellwig1-3/+0
Spotted while preparing qla2xxx changes as the symbols exist in both drivers (sigh..). Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2017-01-11scsi: cxlflash: Cancel scheduled workers before stopping AFUUma Krishnan2-30/+6
When processing an AFU asynchronous interrupt, if the action results in an operation that requires off level processing (a link reset for example), the worker thread is scheduled. In the meantime a reset event (i.e.: EEH) could unmap the AFU to recover. This results in an Oops when the worker thread tries to access the AFU mapping. [c000000f17e03b90] d000000007cd5978 cxlflash_worker_thread+0x268/0x550 [c000000f17e03c40] c00000000011883c process_one_work+0x1dc/0x680 [c000000f17e03ce0] c000000000118e80 worker_thread+0x1a0/0x520 [c000000f17e03d80] c000000000126174 kthread+0xf4/0x100 [c000000f17e03e30] c00000000000a47c ret_from_kernel_thread+0x5c/0xe0 In an effort to avoid this, a mapcount was introduced in commit b45cdbaf9f7f ("cxlflash: Resolve oops in wait_port_offline") but due to the race condition described above, this solution is incomplete. In order to fully resolve this problem and to simplify things, this commit removes the mapcount solution. Instead, the scheduled worker thread is cancelled after interrupts have been disabled and prior to the mapping being freed. Fixes: b45cdbaf9f7f ("cxlflash: Resolve oops in wait_port_offline") Signed-off-by: Uma Krishnan <[email protected]> Acked-by: Matthew R. Ochs <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.