| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If an error occurs in the front end when multi-lrc requests are getting
generated we need to skip these in the backend but we still need to
emit the breadcrumbs seqno. An issues arises because with multi-lrc
breadcrumbs there is a handshake between the parent and children to make
forward progress. If all the requests are not present this handshake
doesn't work. To work around this, if multi-lrc request has an error we
skip the handshake but still emit the breadcrumbs seqno.
v2:
(John Harrison)
- Add comment explaining the skipping of the handshake logic
- Fix typos in the commit message
v3:
(John Harrison)
- Fix up some comments about the math to NOP the ring
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Allow multiple batch buffers to be submitted in a single execbuf IOCTL
after a context has been configured with the 'set_parallel' extension.
The number batches is implicit based on the contexts configuration.
This is implemented with a series of loops. First a loop is used to find
all the batches, a loop to pin all the HW contexts, a loop to create all
the requests, a loop to submit (emit BB start, etc...) all the requests,
a loop to tie the requests to the VMAs they touch, and finally a loop to
commit the requests to the backend.
A composite fence is also created for the generated requests to return
to the user and to stick in dma resv slots.
No behavior from the existing IOCTL should be changed aside from when
throttling because the ring for a context is full. In this situation,
i915 will now wait while holding the object locks. This change was done
because the code is much simpler to wait while holding the locks and we
believe there isn't a huge benefit of dropping these locks. If this
proves false we can restructure the code to drop the locks during the
wait.
IGT: https://patchwork.freedesktop.org/patch/447008/?series=93071&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252
v2:
(Matthew Brost)
- Return proper error value if i915_request_create fails
v3:
(John Harrison)
- Add comment explaining create / add order loops + locking
- Update commit message explaining different in IOCTL behavior
- Line wrap some comments
- eb_add_request returns void
- Return -EINVAL rather triggering BUG_ON if cmd parser used
(Checkpatch)
- Check eb->batch_len[*current_batch]
v4:
(CI)
- Set batch len if passed if via execbuf args
- Call __i915_request_skip after __i915_request_commit
(Kernel test robot)
- Initialize rq to NULL in eb_pin_timeline
v5:
(John Harrison)
- Fix typo in comments near bb order loops
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For some users of multi-lrc, e.g. split frame, it isn't safe to preempt
mid BB. To safely enable preemption at the BB boundary, a handshake
between parent and child is needed, syncing the set of BBs at the
beginning and end of each batch. This is implemented via custom
emit_bb_start & emit_fini_breadcrumb functions and enabled by default if
a context is configured by set parallel extension.
Lastly, this patch updates the process descriptor to the correct size as
the memory used in the handshake is directly after the process
descriptor.
v2:
(John Harrison)
- Fix a few comments wording
- Add struture for parent page layout
v3:
(John Harrison)
- A structure for sync semaphore
- Use offsetof to calc address
- Update commit message
v4:
(John Harrison)
- Fix typos in comment explaining memory map of scratch page
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add very basic (single submission) multi-lrc selftest.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Update parallel submit doc to point to i915_drm.h
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Introduce 'set parallel submit' extension to connect UAPI to GuC
multi-lrc interface. Kernel doc in new uAPI should explain it all.
IGT: https://patchwork.freedesktop.org/patch/447008/?series=93071&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252
v2:
(Daniel Vetter)
- Add IGT link and placeholder for media UMD link
v3:
(Kernel test robot)
- Fix warning in unpin engines call
(John Harrison)
- Reword a bunch of the kernel doc
v4:
(John Harrison)
- Add comment why perma-pin is done after setting gem context
- Update some comments / docs for proto contexts
v5:
(John Harrison)
- Rework perma-pin comment
- Add BUG_IN if context is pinned when setting gem context
Cc: Tvrtko Ursulin <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Display the workqueue status in debugfs for GuC contexts that are in
parent-child relationship.
v2:
(John Harrison)
- Output number children in debugfs
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Update context and full GPU reset to work with multi-lrc. The idea is
parent context tracks all the active requests inflight for itself and
its children. The parent context owns the reset replaying / canceling
requests as needed.
v2:
(John Harrison)
- Simply loop in find active request
- Add comments to find ative request / reset loop
v3:
(John Harrison)
- s/its'/its/g
- Fix comment when searching for active request
- Reorder if state in __guc_reset_context
v4:
(Kernel test robot)
- Delete unused is_multi_lrc function
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The GuC must receive requests in the order submitted for contexts in a
parent-child relationship to function correctly. To ensure this, insert
a submit fence between the current request and last request submitted
for requests / contexts in a parent child relationship. This is
conceptually similar to a single timeline.
Signed-off-by: Matthew Brost <[email protected]>
Cc: John Harrison <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Implement multi-lrc submission via a single workqueue entry and single
H2G. The workqueue entry contains an updated tail value for each
request, of all the contexts in the multi-lrc submission, and updates
these values simultaneously. As such, the tasklet and bypass path have
been updated to coalesce requests into a single submission.
v2:
(John Harrison)
- s/wqe/wqi
- Use FIELD_PREP macros
- Add GEM_BUG_ONs ensures length fits within field
- Add comment / white space to intel_guc_write_barrier
(Kernel test robot)
- Make need_tasklet a static function
v3:
(Docs)
- A comment for submission_stall_reason
v4:
(Kernel test robot)
- Initialize return value in bypass tasklt submit function
(John Harrison)
- Add comment near work queue defs
- Add BUILD_BUG_ON to ensure WQ_SIZE is a power of 2
- Update write_barrier comment to talk about work queue
v5:
(John Harrison)
- Fix typo in work queue comment
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Parallel contexts are perma-pinned by the upper layers which makes the
backend implementation rather simple. The parent pins the guc_id and
children increment the parent's pin count on pin to ensure all the
contexts are unpinned before we disable scheduling with the GuC / or
deregister the context.
v2:
(Daniel Vetter)
- Perma-pin parallel contexts
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Assign contexts in parent-child relationship consecutive guc_ids. This
is accomplished by partitioning guc_id space between ones that need to
be consecutive (1/16 available guc_ids) and ones that do not (15/16 of
available guc_ids). The consecutive search is implemented via the bitmap
API.
This is a precursor to the full GuC multi-lrc implementation but aligns
to how GuC mutli-lrc interface is defined - guc_ids must be consecutive
when using the GuC multi-lrc interface.
v2:
(Daniel Vetter)
- Explicitly state why we assign consecutive guc_ids
v3:
(John Harrison)
- Bring back in spin lock
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In GuC parent-child contexts the parent context controls the scheduling,
ensure only the parent does the scheduling operations.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add multi-lrc context registration H2G. In addition a workqueue and
process descriptor are setup during multi-lrc context registration as
these data structures are needed for multi-lrc submission.
v2:
(John Harrison)
- Move GuC specific fields into sub-struct
- Clean up WQ defines
- Add comment explaining math to derive WQ / PD address
v3:
(John Harrison)
- Add PARENT_SCRATCH_SIZE define
- Update comment explaining multi-lrc register
v4:
(John Harrison)
- Move PARENT_SCRATCH_SIZE to common file
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Introduce context parent-child relationship. Once this relationship is
created all pinning / unpinning operations are directed to the parent
context. The parent context is responsible for pinning all of its
children and itself.
This is a precursor to the full GuC multi-lrc implementation but aligns
to how GuC mutli-lrc interface is defined - a single H2G is used
register / deregister all of the contexts simultaneously.
Subsequent patches in the series will implement the pinning / unpinning
operations for parent / child contexts.
v2:
(Daniel Vetter)
- Add kernel doc, add wrapper to access parent to ensure safety
v3:
(John Harrison)
- Fix comment explaing GEM_BUG_ON in to_parent()
- Make variable names generic (non-GuC specific)
v4:
(John Harrison)
- s/its'/its/g
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Expose logical engine instance to user via query engine info IOCTL. This
is required for split-frame workloads as these needs to be placed on
engines in a logically contiguous order. The logical mapping can change
based on fusing. Rather than having user have knowledge of the fusing we
simply just expose the logical mapping with the existing query engine
info IOCTL.
IGT: https://patchwork.freedesktop.org/patch/445637/?series=92854&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252
v2:
(Daniel Vetter)
- Add IGT link, placeholder for media UMD
Cc: Tvrtko Ursulin <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add logical engine mapping. This is required for split-frame, as
workloads need to be placed on engines in a logically contiguous manner.
v2:
(Daniel Vetter)
- Add kernel doc for new fields
v3:
(Tvrtko)
- Update comment for new logical_mask field
v4:
(John Harrison)
- Update comment for new logical_mask field
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Calling switch_to_kernel_context isn't needed if the engine PM reference
is taken while all user contexts are pinned as if don't have PM ref that
guarantees that all user contexts scheduling is disabled. By not calling
switch_to_kernel_context we save on issuing a request to the engine.
v2:
(Daniel Vetter)
- Add FIXME comment about pushing switch_to_kernel_context to backend
v3:
(John Harrison)
- Update commit message
- Fix workding comment
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Taking a PM reference to prevent intel_gt_wait_for_idle from short
circuiting while any user context has scheduling enabled. Returning GT
idle when it is not can cause all sorts of issues throughout the stack.
v2:
(Daniel Vetter)
- Add might_lock annotations to pin / unpin function
v3:
(CI)
- Drop intel_engine_pm_might_put from unpin path as an async put is
used
v4:
(John Harrison)
- Make intel_engine_pm_might_get/put work with GuC virtual engines
- Update commit message
v5:
- Update commit message again
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Taking a PM reference to prevent intel_gt_wait_for_idle from short
circuiting while a deregister context H2G is in flight. To do this must
issue the deregister H2G from a worker as context can be destroyed from
an atomic context and taking GT PM ref blows up. Previously we took a
runtime PM from this atomic context which worked but will stop working
once runtime pm autosuspend in enabled.
So this patch is two fold, stop intel_gt_wait_for_idle from short
circuting and fix runtime pm autosuspend.
v2:
(John Harrison)
- Split structure changes out in different patch
(Tvrtko)
- Don't drop lock in deregister_destroyed_contexts
v3:
(John Harrison)
- Flush destroyed contexts before destroying context reg pool
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move guc_id allocation under submission state sub-struct as a future
patch will reuse the spin lock as a global submission state lock. Moving
this into sub-struct makes ownership of fields / lock clear.
v2:
(Docs)
- Add comment for submission_state sub-structure
v3:
(John Harrison)
- Fixup a few comments
v4:
(John Harrison)
- Fix typo
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The following interfaces:
i915_wedged
i915_forcewake_user
are dependent on gt values. Put them inside gt/ and drop the
"i915_" prefix name. This would be the new structure:
dri/0/gt
|
+-- forcewake_user
|
\-- reset
For backwards compatibility with existing igt (and the slight
semantic difference between operating on the i915 abi entry
points and the deep gt info):
dri/0
|
+-- i915_wedged
|
\-- i915_forcewake_user
remain at the top level.
Signed-off-by: Andi Shyti <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Chris Wilson <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
5.15-rc1 crashes with blank screen when booting up on two ThinkPads
using i915. Bisections converge convincingly, but arrive at different
and surprising "culprits", none of them the actual culprit.
netconsole (with init_netconsole() hacked to call i915_init() when
logging has started, instead of by module_init()) tells the story:
kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245!
with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify().
I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that
function needs to be 4-byte aligned.
v2:
(Jani Nikula)
- Change BUG_ON to WARN_ON
v3:
(Jani / Tvrtko)
- Short circuit __i915_sw_fence_init on WARN_ON
v4:
(Lucas)
- Break WARN_ON changes out in a different patch
Fixes: 62eaf0ae217d ("drm/i915/guc: Support request cancellation")
Signed-off-by: Hugh Dickins <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The I915_TILING_* definitions in the uapi header are intended solely for
tiling modes that are visible to the old de-tiling fence ioctls. Since
modern hardware does not support de-tiling fences, we should not add new
definitions for new tiling types going forward. However we do want the
client blit selftest to eventually cover other new tiling modes (such as
Tile4), so switch it to using its own enum of tiling modes.
Cc: Ville Syrjälä <[email protected]>
Cc: Stanislav Lisovskiy <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Let's include what we use instead of relying on other indirect includes.
Signed-off-by: Lucas De Marchi <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We are currently using tsc_khz as a fallback so add the right include.
For other architectures we may need to add a different fallback, but
this is not being used by dgfx so we may as well just paper it over.
Signed-off-by: Lucas De Marchi <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When trying to bring IS_ACTIVE to linux/kconfig.h I thought it wouldn't
provide much value just encapsulating it in a boolean context. So I also
added the support for handling undefined macros as the IS_ENABLED()
counterpart. However the feedback received from Masahiro Yamada was that
it is too ugly, not providing much value. And just wrapping in a boolean
context is too dumb - we could simply open code it.
As detailed in commit babaab2f4738 ("drm/i915: Encapsulate kconfig
constant values inside boolean predicates"), the IS_ACTIVE macro was
added to workaround a compilation warning. However after checking again
our current uses of IS_ACTIVE it turned out there is only
1 case in which it triggers a warning in clang (due
-Wconstant-logical-operand) and 2 in smatch. All the others
can simply use the shorter version, without wrapping it in any macro.
So here I'm dialing all the way back to simply removing the macro. That
single case hit by clang can be changed to make the constant come first,
so it doesn't think it's mask:
- if (context && CONFIG_DRM_I915_FENCE_TIMEOUT)
+ if (CONFIG_DRM_I915_FENCE_TIMEOUT && context)
As talked with Dan Carpenter, that logic will be added in smatch as
well, so it will also stop warning about it.
Signed-off-by: Lucas De Marchi <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Reviewed-by: Masahiro Yamada <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In short this makes i915 work for hybrid setups (DRI_PRIME=1 with Mesa)
when rendering is done on Intel dgfx and scanout/composition on Intel
igfx.
Before this patch the driver was not quite ready for that setup, mainly
because it was able to emit a semaphore wait between the two GPUs, which
results in deadlocks because semaphore target location in HWSP is neither
shared between the two, nor mapped in both GGTT spaces.
To fix it the patch adds an additional check to a couple of relevant code
paths in order to prevent using semaphores for inter-engine
synchronisation when relevant objects are not in the same GGTT space.
v2:
* Avoid adding rq->i915. (Chris)
v3:
* Use GGTT which describes the limit more precisely.
Signed-off-by: Tvrtko Ursulin <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Matthew Auld <[email protected]>
Cc: Thomas Hellström <[email protected]>
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Set number of engines before attempting to create contexts so the
function free_engines can clean up properly. Also check return of
alloc_engines for NULL.
v2:
(Tvrtko)
- Send as stand alone patch
(John Harrison)
- Check for alloc_engines returning NULL
v3:
(Checkpatch / Tvrtko)
- Remove braces around single line if statement
Cc: Jason Ekstrand <[email protected]>
Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Reviewed-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Cc: <[email protected]>
Signed-off-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
i915 enables a wider set of warnings with '-Wall -Wextra' then disables
several with cc-disable-warning. If an unknown flag gets added to
KBUILD_CFLAGS when building with clang, all subsequent calls to
cc-{disable-warning,option} will fail, meaning that all of these
warnings do not get disabled [1].
A separate series will address the root cause of the issue by not adding
these flags when building with clang [2]; however, the symptom of these
extra warnings appearing can be addressed separately by just removing
the calls to cc-disable-warning, which makes the build ever so slightly
faster because the compiler does not need to be called as much before
building.
The following warnings are supported by GCC 4.9 and clang 10.0.1, which
are the minimum supported versions of these compilers so the call to
cc-disable-warning is not necessary. Masahiro cleaned this up for the
reset of the kernel in commit 4c8dd95a723d ("kbuild: add some extra
warning flags unconditionally").
* -Wmissing-field-initializers
* -Wsign-compare
* -Wtype-limits
* -Wunused-parameter
-Wunused-but-set-variable was implemented in clang 13.0.0 and
-Wframe-address was implemented in clang 12.0.0 so the
cc-disable-warning calls are kept for these two warnings.
Lastly, -Winitializer-overrides is clang's version of -Woverride-init,
which is disabled for the specific files that are problematic. clang
added a compatibility alias in clang 8.0.0 so -Winitializer-overrides
can be removed.
[1]: https://lore.kernel.org/r/[email protected]/
[2]: https://lore.kernel.org/r/[email protected]/
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Note that discrete cards can support PXP as well, but we haven't tested
on those yet so keeping it disabled for now.
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now that all the pieces are in place we can add a description of how the
feature works. Also modify the comments in struct intel_pxp into
kerneldoc.
v2: improve doc (Rodrigo)
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
2 debugfs files, one to query the current status of the pxp session and one
to trigger an invalidation for testing.
v2: rename debugfs, fix date (Alan)
v12: rebased to latest drm-tip (rename of files/structs from
debugfs_gt to intel_debugfs_gt caused compiler errors).
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Reviewed-by : Alan Previn <[email protected]>
Reviewed-by: Alan Previn <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When protected sufaces has flipped and pxp session is disabled,
display black pixels by using plane color CTM correction.
v2:
- Display black pixels in async flip too.
v3:
- Removed the black pixels logic for async flip. [Ville]
- Used plane state to force black pixels. [Ville]
v4 (Daniele): update pxp_is_borked check.
v5: rebase on top of v9 plane decryption moving the decrypt check
(Juston)
Cc: Ville Syrjälä <[email protected]>
Cc: Gaurav Kumar <[email protected]>
Cc: Shankar Uma <[email protected]>
Signed-off-by: Anshuman Gupta <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: Juston Li <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Uma Shankar <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support to enable/disable PLANE_SURF Decryption Request bit.
It requires only to enable plane decryption support when following
condition met.
1. PXP session is enabled.
2. Buffer object is protected.
v2:
- Used gen fb obj user_flags instead gem_object_metadata. [Krishna]
v3:
- intel_pxp_gem_object_status() API changes.
v4: use intel_pxp_is_active (Daniele)
v5: rebase and use the new protected object status checker (Daniele)
v6: used plane state for plane_decryption to handle async flip
as suggested by Ville.
v7: check pxp session while plane decrypt state computation. [Ville]
removed pointless code. [Ville]
v8 (Daniele): update PXP check
v9: move decrypt check after icl_check_nv12_planes() when overlays
have fb set (Juston)
v10 (Daniele): update PXP check again to match rework in earlier
patches and don't consider protection valid if the object has not
been used in an execbuf beforehand.
Cc: Bommu Krishnaiah <[email protected]>
Cc: Huang Sean Z <[email protected]>
Cc: Gaurav Kumar <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Anshuman Gupta <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: Juston Li <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Uma Shankar <[email protected]> #v9
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
During the power event S3+ sleep/resume, hardware will lose all the
encryption keys for every hardware session, even though the
session state might still be marked as alive after resume. Therefore,
we should consider the session as dead on suspend and invalidate all the
objects. The session will be automatically restarted on the first
protected submission on resume.
v2: runtime suspend also invalidates the keys
v3: fix return codes, simplify rpm ops (Chris), use the new worker func
v4: invalidate the objects on suspend, don't re-create the arb sesson on
resume (delayed to first submission).
v5: move irq changes back to irq patch (Rodrigo)
v6: drop invalidation in runtime suspend (Rodrigo)
Signed-off-by: Huang, Sean Z <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now that we can handle destruction and re-creation of the arb session,
we can postpone the start of the session to the first submission that
requires it, to avoid keeping it running with no user.
v10: increase timeout when waiting in intel_pxp_start as firmware
session startup is slower right after boot.
v13: increase the same timeout by 50 milisec because previous timeout
was not enough to cover two lower level 100 milisec timeouts
in the session termination + creation steps.
Signed-off-by: Alan Previn <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This api allow user mode to create protected buffers and to mark
contexts as making use of such objects. Only when using contexts
marked in such a way is the execution guaranteed to work as expected.
Contexts can only be marked as using protected content at creation time
(i.e. the parameter is immutable) and they must be both bannable and not
recoverable. Given that the protected session gets invalidated on
suspend, contexts created this way hold a runtime pm wakeref until
they're either destroyed or invalidated.
All protected objects and contexts will be considered invalid when the
PXP session is destroyed and all new submissions using them will be
rejected. All intel contexts within the invalidated gem contexts will be
marked banned. Userspace can detect that an invalidation has occurred via
the RESET_STATS ioctl, where we report it the same way as a ban due to a
hang.
v5: squash patches, rebase on proto_ctx, update kerneldoc
v6: rebase on obj create_ext changes
v7: Use session counter to check if an object it valid, hold wakeref in
context, don't add a new flag to RESET_STATS (Daniel)
v8: don't increase guilty count for contexts banned during pxp
invalidation (Rodrigo)
v9: better comments, avoid wakeref put race between pxp_inval and
context_close, add usage examples (Rodrigo)
v10: modify internal set/get-protected-context functions to not
return -ENODEV when setting PXP param to false or getting param
when running on pxp-unsupported hw or getting param when i915
was built with CONFIG_PXP off
Signed-off-by: Alan Previn <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: Bommu Krishnaiah <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Lionel Landwerlin <[email protected]>
Cc: Jason Ekstrand <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The HW will generate a teardown interrupt when session termination is
required, which requires i915 to submit a terminating batch. Once the HW
is done with the termination it will generate another interrupt, at
which point it is safe to re-create the session.
Since the termination and re-creation flow is something we want to
trigger from the driver as well, use a common work function that can be
called both from the irq handler and from the driver set-up flows, which
has the addded benefit of allowing us to skip any extra locks because
the work itself serializes the operations.
v2: use struct completion instead of bool (Chris)
v3: drop locks, clean up functions and improve comments (Chris),
move to common work function.
v4: improve comments, simplify wait logic (Rodrigo)
v5: unconditionally set interrupts, rename state_attacked var (Rodrigo)
v10: remove inclusion of intel_gt_types.h from intel_pxp.h (Jani)
Signed-off-by: Alan Previn <[email protected]>
Signed-off-by: Huang, Sean Z <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Teardown is triggered when the display topology changes and no
long meets the secure playback requirement, and hardware trashes
all the encryption keys for display. Additionally, we want to emit a
teardown operation to make sure we're clean on boot and resume
v2: emit in the ring, use high prio request (Chris)
v3: better defines, stalling flush, cleaned up and renamed submission
funcs (Chris)
v12: fix uninitialized variable bug
Signed-off-by: Huang, Sean Z <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Chris Wilson <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Create the arbitrary session, with the fixed session id 0xf, after
system boot, for the case that application allocates the protected
buffer without establishing any protection session. Because the
hardware requires at least one alive session for protected buffer
creation. This arbitrary session will need to be re-created after
teardown or power event because hardware encryption key won't be
valid after such cases.
The session ID is exposed as part of the uapi so it can be used as part
of userspace commands.
v2: use gt->uncore->rpm (Chris)
v3: s/arb_is_in_play/arb_is_valid (Chris), move set-up to the new
init_hw function
v4: move interface defs to separate header, set arb_is valid to false
on fini (Rodrigo)
v5: handle async component binding
Signed-off-by: Huang, Sean Z <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The setting is required by hardware to allow us doing further protection
operation such as sending commands to GPU or TEE. The register needs to
be re-programmed on resume, so for simplicitly we bundle the programming
with the component binding, which is automatically called on resume.
Further HW set-up operations will be added in the same location in
follow-up patches, so get ready for them by using a couple of
init/fini_hw wrappers instead of calling the KCR funcs directly.
v3: move programming to component binding function, rework commit msg
Signed-off-by: Huang, Sean Z <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Implement the funcs to create the TEE channel, so kernel can
send the TEE commands directly to TEE for creating the arbitrary
(default) session.
v2: fix locking, don't pollute dev_priv (Chris)
v3: wait for mei PXP component to be bound.
v4: drop the wait, as the component might be bound after i915 load
completes. We'll instead check when sending a tee message.
v5: fix an issue with mei_pxp module removal
v6: don't use fetch_and_zero in fini (Rodrigo)
Signed-off-by: Huang, Sean Z <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Chris Wilson <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The context is required to send the session termination commands to the
VCS, which will be implemented in a follow-up patch. We can also use the
presence of the context as a check of pxp initialization completion.
v2: use perma-pinned context (Chris)
v3: rename pinned_context functions (Chris)
v4: split export of pinned_context functions to a separate patch (Rodrigo)
v10: remove inclusion of intel_gt_types.h from intel_pxp.h (Jani)
v13: fixed for loop pointer dereference (Vinay)
Signed-off-by: Alan Previn <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Chris Wilson <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Ahead of the PXP implementation, define the relevant define flag and
kconfig option.
v2: flip kconfig default to N. Some machines have IFWIs that do not
support PXP, so we need it to be an opt-in until we add support to query
the caps from the mei device.
v10: change comments from "Gen12+" to "Gen12 and newer"
Signed-off-by: Alan Previn <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Export PAVP client to work with i915 driver,
for binding it uses kernel component framework.
v2:drop debug prints, refactor match code to match mei_hdcp (Tomas)
Signed-off-by: Vitaly Lubart <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This will be used for communication between the i915 driver and the mei
one. Defining it in a stand-alone patch to avoid circualr dependedencies
between the patches modifying the 2 drivers.
Split out from an original patch from Huang, Sean Z
v2: rename the component struct (Rodrigo)
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
If we timeout waiting for a CT reply we print very simple error
message. Improve that and by moving error reporting to the caller
we can use CT_ERROR instead of DRM_ERROR and report just fence
as error code will be reported later anyway.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Instead of plain error value (%d) print more user friendly error
name (%pe).
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Instead of plain error value (%d) print more user friendly error
name (%pe).
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|