aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-03-20perf build: Check what binutils's 'disassembler()' signature to useSong Liu3-2/+18
Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666e380 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by: Song Liu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: Stanislav Fomichev <[email protected]> Link: http://lkml.kernel.org/r/[email protected] [ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-20Btrfs: fix assertion failure on fsync with NO_HOLES enabledFilipe Manana1-8/+1
Back in commit a89ca6f24ffe4 ("Btrfs: fix fsync after truncate when no_holes feature is enabled") I added an assertion that is triggered when an inline extent is found to assert that the length of the (uncompressed) data the extent represents is the same as the i_size of the inode, since that is true most of the time I couldn't find or didn't remembered about any exception at that time. Later on the assertion was expanded twice to deal with a case of a compressed inline extent representing a range that matches the sector size followed by an expanding truncate, and another case where fallocate can update the i_size of the inode without adding or updating existing extents (if the fallocate range falls entirely within the first block of the file). These two expansion/fixes of the assertion were done by commit 7ed586d0a8241 ("Btrfs: fix assertion on fsync of regular file when using no-holes feature") and commit 6399fb5a0b69a ("Btrfs: fix assertion failure during fsync in no-holes mode"). These however missed the case where an falloc expands the i_size of an inode to exactly the sector size and inline extent exists, for example: $ mkfs.btrfs -f -O no-holes /dev/sdc $ mount /dev/sdc /mnt $ xfs_io -f -c "pwrite -S 0xab 0 1096" /mnt/foobar wrote 1096/1096 bytes at offset 0 1 KiB, 1 ops; 0.0002 sec (4.448 MiB/sec and 4255.3191 ops/sec) $ xfs_io -c "falloc 1096 3000" /mnt/foobar $ xfs_io -c "fsync" /mnt/foobar Segmentation fault $ dmesg [701253.602385] assertion failed: len == i_size || (len == fs_info->sectorsize && btrfs_file_extent_compression(leaf, extent) != BTRFS_COMPRESS_NONE) || (len < i_size && i_size < fs_info->sectorsize), file: fs/btrfs/tree-log.c, line: 4727 [701253.602962] ------------[ cut here ]------------ [701253.603224] kernel BUG at fs/btrfs/ctree.h:3533! [701253.603503] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [701253.603774] CPU: 2 PID: 7192 Comm: xfs_io Tainted: G W 5.0.0-rc8-btrfs-next-45 #1 [701253.604054] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [701253.604650] RIP: 0010:assfail.constprop.23+0x18/0x1a [btrfs] (...) [701253.605591] RSP: 0018:ffffbb48c186bc48 EFLAGS: 00010286 [701253.605914] RAX: 00000000000000de RBX: ffff921d0a7afc08 RCX: 0000000000000000 [701253.606244] RDX: 0000000000000000 RSI: ffff921d36b16868 RDI: ffff921d36b16868 [701253.606580] RBP: ffffbb48c186bcf0 R08: 0000000000000000 R09: 0000000000000000 [701253.606913] R10: 0000000000000003 R11: 0000000000000000 R12: ffff921d05d2de18 [701253.607247] R13: ffff921d03b54000 R14: 0000000000000448 R15: ffff921d059ecf80 [701253.607769] FS: 00007f14da906700(0000) GS:ffff921d36b00000(0000) knlGS:0000000000000000 [701253.608163] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [701253.608516] CR2: 000056087ea9f278 CR3: 00000002268e8001 CR4: 00000000003606e0 [701253.608880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [701253.609250] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [701253.609608] Call Trace: [701253.609994] btrfs_log_inode+0xdfb/0xe40 [btrfs] [701253.610383] btrfs_log_inode_parent+0x2be/0xa60 [btrfs] [701253.610770] ? do_raw_spin_unlock+0x49/0xc0 [701253.611150] btrfs_log_dentry_safe+0x4a/0x70 [btrfs] [701253.611537] btrfs_sync_file+0x3b2/0x440 [btrfs] [701253.612010] ? do_sysinfo+0xb0/0xf0 [701253.612552] do_fsync+0x38/0x60 [701253.612988] __x64_sys_fsync+0x10/0x20 [701253.613360] do_syscall_64+0x60/0x1b0 [701253.613733] entry_SYSCALL_64_after_hwframe+0x49/0xbe [701253.614103] RIP: 0033:0x7f14da4e66d0 (...) [701253.615250] RSP: 002b:00007fffa670fdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a [701253.615647] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f14da4e66d0 [701253.616047] RDX: 000056087ea9c260 RSI: 000056087ea9c260 RDI: 0000000000000003 [701253.616450] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000010 [701253.616854] R10: 000000000000009b R11: 0000000000000246 R12: 000056087ea9c260 [701253.617257] R13: 000056087ea9c240 R14: 0000000000000000 R15: 000056087ea9dd10 (...) [701253.619941] ---[ end trace e088d74f132b6da5 ]--- Updating the assertion again to allow for this particular case would result in a meaningless assertion, plus there is currently no risk of logging content that would result in any corruption after a log replay if the size of the data encoded in an inline extent is greater than the inode's i_size (which is not currently possibe either with or without compression), therefore just remove the assertion. CC: [email protected] # 4.4+ Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-03-20scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()Luo Jiaxing1-0/+6
We found out that for v2 hw, a SATA disk can not be written to after the system comes up. In commit ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an internal abort for a SATA device, but without following it with a softreset. We need to always follow an internal abort with a software reset, as per HW programming flow, so add this. Fixes: ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()") Signed-off-by: Luo Jiaxing <[email protected]> Signed-off-by: John Garry <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2019-03-20irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmpRasmus Villemoes1-1/+1
The lpi_range_list is supposed to be sorted in ascending order of ->base_id (at least if the range merging is to work), but the current comparison function returns a positive value if rb->base_id > ra->base_id, which means that list_sort() will put A after B in that case - and vice versa, of course. Fixes: 880cb3cddd16 (irqchip/gic-v3-its: Refactor LPI allocator) Cc: [email protected] (v4.19+) Signed-off-by: Rasmus Villemoes <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-03-20sctp: use memdup_user instead of vmemdup_userXin Long1-6/+6
In sctp_setsockopt_bindx()/__sctp_setsockopt_connectx(), it allocates memory with addrs_size which is passed from userspace. We used flag GFP_USER to put some more restrictions on it in Commit cacc06215271 ("sctp: use GFP_USER for user-controlled kmalloc"). However, since Commit c981f254cc82 ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()"), vmemdup_user() has been used, which doesn't check GFP_USER flag when goes to vmalloc_*(). So when addrs_size is a huge value, it could exhaust memory and even trigger oom killer. This patch is to use memdup_user() instead, in which GFP_USER would work to limit the memory allocation with a huge addrs_size. Note we can't fix it by limiting 'addrs_size', as there's no demand for it from RFC. Reported-by: [email protected] Fixes: c981f254cc82 ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()") Signed-off-by: Xin Long <[email protected]> Acked-by: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-20ipv6: make ip6_create_rt_rcu return ip6_null_entry instead of NULLXin Long1-8/+10
Jianlin reported a crash: [ 381.484332] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 [ 381.619802] RIP: 0010:fib6_rule_lookup+0xa3/0x160 [ 382.009615] Call Trace: [ 382.020762] <IRQ> [ 382.030174] ip6_route_redirect.isra.52+0xc9/0xf0 [ 382.050984] ip6_redirect+0xb6/0xf0 [ 382.066731] icmpv6_notify+0xca/0x190 [ 382.083185] ndisc_redirect_rcv+0x10f/0x160 [ 382.102569] ndisc_rcv+0xfb/0x100 [ 382.117725] icmpv6_rcv+0x3f2/0x520 [ 382.133637] ip6_input_finish+0xbf/0x460 [ 382.151634] ip6_input+0x3b/0xb0 [ 382.166097] ipv6_rcv+0x378/0x4e0 It was caused by the lookup function __ip6_route_redirect() returns NULL in fib6_rule_lookup() when ip6_create_rt_rcu() returns NULL. So we fix it by simply making ip6_create_rt_rcu() return ip6_null_entry instead of NULL. v1->v2: - move down 'fallback:' to make it more readable. Fixes: e873e4b9cc7e ("ipv6: use fib6_info_hold_safe() when necessary") Reported-by: Jianlin Shi <[email protected]> Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: Xin Long <[email protected]> Reviewed-by: David Ahern <[email protected]> Acked-by: Wei Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-20Merge tag 'arc-5.1-rc2' of ↵Linus Torvalds27-314/+399
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - unaligned access support for HS cores - Removed extra memory barrier around spinlock code - HSDK platform updates: enable dmac, reset - some more boot logging updates - misc minor fixes * tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arch: arc: Kconfig: pedantic formatting ARCv2: spinlock: remove the extra smp_mb before lock, after unlock ARC: unaligned: relax the check for gcc supporting -mno-unaligned-access ARC: boot log: cut down on verbosity ARCv2: boot log: refurbish HS core/release identification arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM ARC: u-boot args: check that magic number is correct ARC: perf: bpok condition only exists for ARCompact ARCv2: Add explcit unaligned access support (and ability to disable too) ARCv2: lib: introduce memcpy optimized for unaligned access ARC: [plat-hsdk]: Enable AXI DW DMAC support ARC: [plat-hsdk]: Add reset controller handle to manage USB reset ARC: DTB: [scripted] fix node name and address spelling
2019-03-20net/packet: Set __GFP_NOWARN upon allocation in alloc_pg_vecChristoph Paasch1-1/+1
Since commit fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check") one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller found that that triggers a warning: [ 21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0 [ 21.101490] Modules linked in: [ 21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146 [ 21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630 [ 21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3 [ 21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246 [ 21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000 [ 21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000 [ 21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67 [ 21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d [ 21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d [ 21.112552] FS: 00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000 [ 21.113612] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0 [ 21.115367] Call Trace: [ 21.115705] ? __alloc_pages_slowpath+0x21c0/0x21c0 [ 21.116362] alloc_pages_current+0xac/0x1e0 [ 21.116923] kmalloc_order+0x18/0x70 [ 21.117393] kmalloc_order_trace+0x18/0x110 [ 21.117949] packet_set_ring+0x9d5/0x1770 [ 21.118524] ? packet_rcv_spkt+0x440/0x440 [ 21.119094] ? lock_downgrade+0x620/0x620 [ 21.119646] ? __might_fault+0x177/0x1b0 [ 21.120177] packet_setsockopt+0x981/0x2940 [ 21.120753] ? __fget+0x2fb/0x4b0 [ 21.121209] ? packet_release+0xab0/0xab0 [ 21.121740] ? sock_has_perm+0x1cd/0x260 [ 21.122297] ? selinux_secmark_relabel_packet+0xd0/0xd0 [ 21.123013] ? __fget+0x324/0x4b0 [ 21.123451] ? selinux_netlbl_socket_setsockopt+0x101/0x320 [ 21.124186] ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0 [ 21.124908] ? __lock_acquire+0x529/0x3200 [ 21.125453] ? selinux_socket_setsockopt+0x5d/0x70 [ 21.126075] ? __sys_setsockopt+0x131/0x210 [ 21.126533] ? packet_release+0xab0/0xab0 [ 21.127004] __sys_setsockopt+0x131/0x210 [ 21.127449] ? kernel_accept+0x2f0/0x2f0 [ 21.127911] ? ret_from_fork+0x8/0x50 [ 21.128313] ? do_raw_spin_lock+0x11b/0x280 [ 21.128800] __x64_sys_setsockopt+0xba/0x150 [ 21.129271] ? lockdep_hardirqs_on+0x37f/0x560 [ 21.129769] do_syscall_64+0x9f/0x450 [ 21.130182] entry_SYSCALL_64_after_hwframe+0x49/0xbe We should allocate with __GFP_NOWARN to handle this. Cc: Kal Conley <[email protected]> Cc: Andrey Konovalov <[email protected]> Fixes: fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check") Signed-off-by: Christoph Paasch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-20arm64: remove obsolete selection of MULTI_IRQ_HANDLERMatthias Kaehlcke1-1/+0
The arm64 config selects MULTI_IRQ_HANDLER, which was renamed to GENERIC_IRQ_MULTI_HANDLER by commit 4c301f9b6a94 ("ARM: Convert to GENERIC_IRQ_MULTI_HANDLER"). The 'new' option is already selected, so just remove the obsolete entry. Signed-off-by: Matthias Kaehlcke <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2019-03-20rbd: drop wait_for_latest_osdmap()Ilya Dryomov1-18/+2
Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jason Dillaman <[email protected]>
2019-03-20libceph: wait for latest osdmap in ceph_monc_blacklist_add()Ilya Dryomov3-1/+28
Because map updates are distributed lazily, an OSD may not know about the new blacklist for quite some time after "osd blacklist add" command is completed. This makes it possible for a blacklisted but still alive client to overwrite a post-blacklist update, resulting in data corruption. Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using the post-blacklist epoch for all post-blacklist requests ensures that all such requests "wait" for the blacklist to come into force on their respective OSDs. Cc: [email protected] Fixes: 6305a3b41515 ("libceph: support for blacklisting clients") Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jason Dillaman <[email protected]>
2019-03-21powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurationsBen Hutchings1-1/+1
MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is enabled, and that was the case before commit 4ffe713b7587 ("powerpc/mm: Increase the max addressable memory to 2PB"). On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now define it as 46. That is larger than the real number of physical address bits, and breaks calculations in zsmalloc: mm/zsmalloc.c:130:49: warning: right shift count is negative MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ^~ ... mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope struct size_class *size_class[ZS_SIZE_CLASSES]; ^~~~~~~~~~ Fixes: 4ffe713b7587 ("powerpc/mm: Increase the max addressable memory to 2PB") Cc: [email protected] # v4.20+ Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-03-20netfilter: nf_tables: add missing ->release_ops() in error path of newrule()Taehee Yoo1-1/+4
->release_ops() callback releases resources and this is used in error path. If nf_tables_newrule() fails after ->select_ops(), it should release resources. but it can not call ->destroy() because that should be called after ->init(). At this point, ->release_ops() should be used for releasing resources. Test commands: modprobe -rv xt_tcpudp iptables-nft -I INPUT -m tcp <-- error command lsmod Result: Module Size Used by xt_tcpudp 20480 2 <-- it should be 0 Fixes: b8e204006340 ("netfilter: nft_compat: use .release_ops and remove list of extension") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-03-20drm/vmwgfx: Don't double-free the mode stored in par->set_modeThomas Zimmermann1-9/+3
When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd twice. The first free is in vmw_fb_kms_detach(), the second is near the end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code only works correctly if the mode doesn't actually change. Removing 'old_mode' in favor of using par->set_mode directly fixes the problem. Cc: <[email protected]> Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Deepak Rawat <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]>
2019-03-20drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID'sDeepak Rawat1-1/+1
If it's not a system error and get_node implementation accommodate the buffer object then it should return 0 with memm::mm_node set to NULL. v2: Test for id != -ENOMEM instead of id == -ENOSPC. Cc: <[email protected]> Fixes: 4eb085e42fde ("drm/vmwgfx: Convert to new IDA API") Signed-off-by: Deepak Rawat <[email protected]> Reviewed-by: Thomas Hellstrom <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]>
2019-03-19mpls: Fix 6PE forwardingVinay K Nallamothu1-3/+9
This patch adds support for 6PE (RFC 4798) which uses IPv4-mapped IPv6 nexthop to connect IPv6 islands over IPv4 only MPLS network core. Prior to this fix, to find the link-layer destination mac address, 6PE enabled host/router was sending IPv6 ND requests for IPv4-mapped IPv6 nexthop address over the interface facing the IPv4 only core which wouldn't success as the core is IPv6 free. This fix changes that behavior on 6PE host to treat the nexthop as IPv4 address and send ARP requests whenever the next-hop address is an IPv4-mapped IPv6 address. Below topology illustrates the issue and how the patch addresses it. abcd::1.1.1.1 (lo) abcd::2.2.2.2 (lo) R0 (PE/host)------------------------R1--------------------------------R2 (PE/host) <--- IPv4 MPLS core ---> <------ IPv4 MPLS core --------> eth1 eth2 eth3 eth4 172.18.0.10 172.18.0.11 172.19.0.11 172.19.0.12 ffff::172.18.0.10 ffff::172.19.0.12 <------------------IPv6 MPLS tunnel ----------------------> R0 and R2 act as 6PE routers of IPv6 islands. R1 is IPv4 only with MPLS tunnels between R0,R1 and R1,R2. docker exec r0 ip -f inet6 route add abcd::2.2.2.2/128 nexthop encap mpls 100 via ::ffff:172.18.0.11 dev eth1 docker exec r2 ip -f inet6 route add abcd::1.1.1.1/128 nexthop encap mpls 200 via ::ffff:172.19.0.11 dev eth4 docker exec r1 ip -f mpls route add 100 via inet 172.19.0.12 dev eth3 docker exec r1 ip -f mpls route add 200 via inet 172.18.0.10 dev eth2 With the change, when R0 sends an IPv6 packet over MPLS tunnel to abcd::2.2.2.2, using ::ffff:172.18.0.11 as the nexthop, it does neighbor discovery for 172.18.18.0.11. Signed-off-by: Vinay K Nallamothu <[email protected]> Tested-by: Avinash Lingala <[email protected]> Tested-by: Aravind Srinivas Srinivasa Prabhakar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-193c515: fix integer overflow warningArnd Bergmann1-1/+1
clang points out a harmless signed integer overflow: drivers/net/ethernet/3com/3c515.c:1530:66: error: implicit conversion from 'int' to 'short' changes value from 32783 to -32753 [-Werror,-Wconstant-conversion] new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~ drivers/net/ethernet/3com/3c515.c:1532:52: error: implicit conversion from 'int' to 'short' changes value from 32775 to -32761 [-Werror,-Wconstant-conversion] new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ drivers/net/ethernet/3com/3c515.c:1534:38: error: implicit conversion from 'int' to 'short' changes value from 32773 to -32763 [-Werror,-Wconstant-conversion] new_mode = SetRxFilter | RxStation | RxBroadcast; ~ ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ Make the variable unsigned to avoid the overflow. Fixes: Linux-2.1.128pre1 Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-19PM / Domains: Avoid a potential deadlockJiada Wang1-7/+6
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock the deadlock scenario is like following: First thread is probing cs2000 cs2000_probe() clk_register() __clk_core_init() clk_prepare_lock() ----> acquires prepare_lock cs2000_recalc_rate() i2c_smbus_read_byte_data() rcar_i2c_master_xfer() dma_request_chan() rcar_dmac_of_xlate() rcar_dmac_alloc_chan_resources() pm_runtime_get_sync() __pm_runtime_resume() rpm_resume() rpm_callback() genpd_runtime_resume() ----> acquires genpd->mlock Second thread is attaching any device to the same PM domain genpd_add_device() genpd_lock() ----> acquires genpd->mlock cpg_mssr_attach_dev() of_clk_get_from_provider() __of_clk_get_from_provider() __clk_create_clk() clk_prepare_lock() ----> acquires prepare_lock Since currently no PM provider access genpd's critical section in .attach_dev, and .detach_dev callbacks, so there is no need to protect these two callbacks with genpd->mlock. This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired in .attach_dev and .detach_dev Signed-off-by: Jiada Wang <[email protected]> Reviewed-by: Ulf Hansson <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-03-19ACPI / utils: Drop reference in test for device presenceAndy Shevchenko1-0/+1
When commit 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") introduced acpi_dev_present(), it missed the fact that bus_find_device() took a reference on the device found by it and the callers of acpi_dev_present() don't drop that reference. Drop the reference on the device in acpi_dev_present(). Fixes: 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-03-19dccp: do not use ipv6 header for ipv4 flowEric Dumazet1-2/+2
When a dual stack dccp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or inet6_iif() helper. Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-19tcp: do not use ipv6 header for ipv4 flowEric Dumazet1-4/+4
When a dual stack tcp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or tcp_v6_iif() helper. Fixes: 1397ed35f22d ("ipv6: add flowinfo for tcp6 pkt_options for all cases") Fixes: df3687ffc665 ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-19nfc: Fix to check for kmemdup failureAditya Pakki1-2/+7
In case of kmemdup failure while setting the service name the patch returns -ENOMEM upstream for processing. Signed-off-by: Aditya Pakki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-19net-sysfs: call dev_hold if kobject_init_and_add successYueHaibing1-2/+4
In netdev_queue_add_kobject and rx_queue_add_kobject, if sysfs_create_group failed, kobject_put will call netdev_queue_release to decrease dev refcont, however dev_hold has not be called. So we will see this while unregistering dev: unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1 Reported-by: Hulk Robot <[email protected]> Fixes: d0d668371679 ("net: don't decrement kobj reference count on init failure") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-19net: stmmac: fix memory corruption with large MTUsAaro Koskinen1-2/+3
When using 16K DMA buffers and ring mode, the DES3 refill is not working correctly as the function is using a bogus pointer for checking the private data. As a result stale pointers will remain in the RX descriptor ring, so DMA will now likely overwrite/corrupt some already freed memory. As simple reproducer, just receive some UDP traffic: # ifconfig eth0 down; ifconfig eth0 mtu 9000; ifconfig eth0 up # iperf3 -c 192.168.253.40 -u -b 0 -R If you didn't crash by now check the RX descriptors to find non-contiguous RX buffers: cat /sys/kernel/debug/stmmaceth/eth0/descriptors_status [...] 1 [0x2be5020]: 0xa3220321 0x9ffc1ffc 0x72d70082 0x130e207e ^^^^^^^^^^^^^^^^^^^^^ 2 [0x2be5040]: 0xa3220321 0x9ffc1ffc 0x72998082 0x1311a07e ^^^^^^^^^^^^^^^^^^^^^ A simple ping test will now report bad data: # ping -s 8200 192.168.253.40 PING 192.168.253.40 (192.168.253.40) 8200(8228) bytes of data. 8208 bytes from 192.168.253.40: icmp_seq=1 ttl=64 time=1.00 ms wrong data byte #8144 should be 0xd0 but was 0x88 Fix the wrong pointer. Also we must refill DES3 only if the DMA buffer size is 16K. Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx") Signed-off-by: Aaro Koskinen <[email protected]> Acked-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-19mlxsw: core: mlxsw: core: avoid -Wint-in-bool-context warningArnd Bergmann1-1/+1
A recently added function in mlxsw triggers a harmless compiler warning: In file included from drivers/net/ethernet/mellanox/mlxsw/core.h:17, from drivers/net/ethernet/mellanox/mlxsw/core_env.c:7: drivers/net/ethernet/mellanox/mlxsw/core_env.c: In function 'mlxsw_env_module_temp_thresholds_get': drivers/net/ethernet/mellanox/mlxsw/reg.h:8015:45: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] #define MLXSW_REG_MTMP_TEMP_TO_MC(val) (val * 125) ~~~~~^~~~~~ drivers/net/ethernet/mellanox/mlxsw/core_env.c:116:8: note: in expansion of macro 'MLXSW_REG_MTMP_TEMP_TO_MC' if (!MLXSW_REG_MTMP_TEMP_TO_MC(module_temp)) { ^~~~~~~~~~~~~~~~~~~~~~~~~ The warning is normally disabled, but it would be nice to enable it to find real bugs, and there are no other known instances at the moment. Replace the negation with a zero-comparison, which also matches the comment above it. Fixes: d93c19a1d95c ("mlxsw: core: Add API for QSFP module temperature thresholds reading") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-19perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotationSong Liu1-0/+54
This patch adds processing of PERF_BPF_EVENT_PROG_LOAD, which sets proper DSO type/id/etc of memory regions mapped to BPF programs to DSO_BINARY_TYPE__BPF_PROG_INFO. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFOSong Liu3-0/+10
Introduce a new dso type DSO_BINARY_TYPE__BPF_PROG_INFO for BPF programs. In symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso will call into a new function symbol__disassemble_bpf() in an upcoming patch, where annotation line information is filled based bpf_prog_info and btf saved in given perf_env. Committer notes: Removed the unnamed union with 'bpf_prog' and 'cache' in 'struct dso', to fix this bug when exiting 'perf top': # perf top perf: Segmentation fault -------- backtrace -------- perf[0x5a785a] /lib64/libc.so.6(+0x385bf)[0x7fd68443c5bf] perf(rb_first+0x2b)[0x4d6eeb] perf(dso__delete+0xb7)[0x4dffb7] perf[0x4f9e37] perf(perf_session__delete+0x64)[0x504df4] perf(cmd_top+0x1957)[0x454467] perf[0x4aad18] perf(main+0x61c)[0x42ec7c] /lib64/libc.so.6(__libc_start_main+0xf2)[0x7fd684428412] perf(_start+0x2d)[0x42eead] # # addr2line -fe ~/bin/perf 0x4dffb7 dso_cache__free /home/acme/git/perf/tools/perf/util/dso.c:713 That is trying to access the dso->data.cache, and that is not used with BPF programs, so we end up accessing what is in bpf_prog.first_member, b00m. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf feature detection: Add -lopcodes to feature-libbfdSong Liu1-3/+3
Both libbfd and libopcodes are distributed with binutil-dev/devel. When libbfd is present, it is OK to assume that libopcodes also present. This has been a safe assumption for bpftool. This patch adds -lopcodes to perf/Makefile.config. libopcodes will be used in the next commit for BPF annotation. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf top: Add option --no-bpf-eventSong Liu1-0/+1
This patch adds option --no-bpf-event to 'perf top', which is the same as the option of 'perf record'. The following patches will use this option. Committer testing: # perf top -vv 2> /tmp/perf_event_attr.out # cat /tmp/perf_event_attr.out ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|CPU|PERIOD read_format ID disabled 1 inherit 1 mmap 1 comm 1 freq 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 ------------------------------------------------------------ # After this patch: # perf top --no-bpf-event -vv 2> /tmp/perf_event_attr.out # cat /tmp/perf_event_attr.out ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|CPU|PERIOD read_format ID disabled 1 inherit 1 mmap 1 comm 1 freq 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 ------------------------------------------------------------ # Signed-off-by: Song Liu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf bpf: Save BTF information as headers to perf.dataSong Liu2-1/+101
This patch enables 'perf record' to save BTF information as headers to perf.data. A new header type HEADER_BPF_BTF is introduced for this data. Committer testing: As root, being on the kernel sources top level directory, run: # perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg Just to compile and load a BPF program that attaches to the raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc). Make sure you have a recent enough clang, say version 9, to get the BTF ELF sections needed for this testing: # clang --version | head -1 clang version 9.0.0 (https://git.llvm.org/git/clang.git/ 7906282d3afec5dfdc2b27943fd6c0309086c507) (https://git.llvm.org/git/llvm.git/ a1b5de1ff8ae8bc79dc8e86e1f82565229bd0500) # readelf -SW tools/perf/examples/bpf/augmented_raw_syscalls.o | grep BTF [22] .BTF PROGBITS 0000000000000000 000ede 000b0e 00 0 0 1 [23] .BTF.ext PROGBITS 0000000000000000 0019ec 0002a0 00 0 0 1 [24] .rel.BTF.ext REL 0000000000000000 002fa8 000270 10 30 23 8 Then do a systemwide perf record session for a few seconds: # perf record -a sleep 2s Then look at: # perf report --header-only | grep b[pt]f # event : name = cycles:ppp, , id = { 1116204, 1116205, 1116206, 1116207, 1116208, 1116209, 1116210, 1116211 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1 # bpf_prog_info of id 13 # bpf_prog_info of id 14 # bpf_prog_info of id 15 # bpf_prog_info of id 16 # bpf_prog_info of id 17 # bpf_prog_info of id 18 # bpf_prog_info of id 21 # bpf_prog_info of id 22 # bpf_prog_info of id 51 # bpf_prog_info of id 52 # btf info of id 8 # We need to show more info about these BPF and BTF entries , but that can be done later. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf bpf: Save BTF in a rbtree in perf_envSong Liu4-0/+102
BTF contains information necessary to annotate BPF programs. This patch saves BTF for BPF programs loaded in the system. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf bpf: Save bpf_prog_info information as headers to perf.dataSong Liu2-1/+153
This patch enables perf-record to save bpf_prog_info information as headers to perf.data. A new header type HEADER_BPF_PROG_INFO is introduced for this data. Committer testing: As root, being on the kernel sources top level directory, run: # perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg Just to compile and load a BPF program that attaches to the raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc). Then do a systemwide perf record session for a few seconds: # perf record -a sleep 2s Then look at: # perf report --header-only | grep -i bpf # bpf_prog_info of id 13 # bpf_prog_info of id 14 # bpf_prog_info of id 15 # bpf_prog_info of id 16 # bpf_prog_info of id 17 # bpf_prog_info of id 18 # bpf_prog_info of id 21 # bpf_prog_info of id 22 # bpf_prog_info of id 208 # bpf_prog_info of id 209 # We need to show more info about these programs, like bpftool does for the ones running on the system, i.e. 'perf record/perf report' become a way of saving the BPF state in a machine to then analyse on another, together with all the other information that is already saved in the perf.data header: # perf report --header-only # ======== # captured on : Tue Mar 12 11:42:13 2019 # header version : 1 # data offset : 296 # data size : 16294184 # feat offset : 16294480 # hostname : quaco # os release : 5.0.0+ # perf version : 5.0.gd783c8 # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz # cpuid : GenuineIntel,6,142,10 # total memory : 24555720 kB # cmdline : /home/acme/bin/perf (deleted) record -a # event : name = cycles:ppp, , id = { 3190123, 3190124, 3190125, 3190126, 3190127, 3190128, 3190129, 3190130 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1 # CPU_TOPOLOGY info available, use -I to display # NUMA_TOPOLOGY info available, use -I to display # pmu mappings: intel_pt = 8, software = 1, power = 11, uprobe = 7, uncore_imc = 12, cpu = 4, cstate_core = 18, uncore_cbox_2 = 15, breakpoint = 5, uncore_cbox_0 = 13, tracepoint = 2, cstate_pkg = 19, uncore_arb = 17, kprobe = 6, i915 = 10, msr = 9, uncore_cbox_3 = 16, uncore_cbox_1 = 14 # CACHE info available, use -I to display # time of first sample : 116392.441701 # time of last sample : 116400.932584 # sample duration : 8490.883 ms # MEM_TOPOLOGY info available, use -I to display # bpf_prog_info of id 13 # bpf_prog_info of id 14 # bpf_prog_info of id 15 # bpf_prog_info of id 16 # bpf_prog_info of id 17 # bpf_prog_info of id 18 # bpf_prog_info of id 21 # bpf_prog_info of id 22 # bpf_prog_info of id 208 # bpf_prog_info of id 209 # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT # ======== # Committer notes: We can't use the libbpf unconditionally, as the build may have been with NO_LIBBPF, when we end up with linking errors, so provide dummy {process,write}_bpf_prog_info() wrapped by HAVE_LIBBPF_SUPPORT for that case. Printing are not affected by this, so can continue as is. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf bpf: Save bpf_prog_info in a rbtree in perf_envSong Liu6-2/+144
bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] [ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead ↵Song Liu4-7/+9
of perf_tool This patch changes the arguments of perf_event__synthesize_bpf_events() to include perf_session* instead of perf_tool*. perf_session will be used in the next patch. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()Song Liu1-78/+40
With bpf_program__get_prog_info_linear, we can simplify the logic that synthesizes bpf events. This patch doesn't change the behavior of the code. Commiter notes: Needed this (for all four variables), suggested by Song, to overcome build failure on debian experimental cross building to MIPS 32-bit: - u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags); + u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(uintptr_t)(info->prog_tags); util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog': util/bpf-event.c:143:35: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags); ^ util/bpf-event.c:144:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] __u32 *prog_lens = (__u32 *)(info->jited_func_lens); ^ util/bpf-event.c:145:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] __u64 *prog_addrs = (__u64 *)(info->jited_ksyms); ^ util/bpf-event.c:146:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] void *func_infos = (void *)(info->func_info); ^ cc1: all warnings being treated as errors Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()Song Liu1-207/+59
This patches uses bpf_program__get_prog_info_linear() to simplify the logic in prog.c do_dump(). Committer testing: Before: # bpftool prog dump xlated id 208 > /tmp/dump.xlated.before # bpftool prog dump jited id 208 > /tmp/dump.jited.before # bpftool map dump id 107 > /tmp/map.dump.before After: # ~acme/git/perf/tools/bpf/bpftool/bpftool map dump id 107 > /tmp/map.dump.after # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208 > /tmp/dump.xlated.after # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump jited id 208 > /tmp/dump.jited.after # diff -u /tmp/dump.xlated.before /tmp/dump.xlated.after # diff -u /tmp/dump.jited.before /tmp/dump.jited.after # diff -u /tmp/map.dump.before /tmp/map.dump.after # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208 0: (bf) r6 = r1 1: (85) call bpf_get_current_pid_tgid#80800 2: (63) *(u32 *)(r10 -328) = r0 3: (bf) r2 = r10 4: (07) r2 += -328 5: (18) r1 = map[id:107] 7: (85) call __htab_map_lookup_elem#85680 8: (15) if r0 == 0x0 goto pc+1 9: (07) r0 += 56 10: (b7) r7 = 0 11: (55) if r0 != 0x0 goto pc+52 12: (bf) r1 = r10 13: (07) r1 += -328 14: (b7) r2 = 64 15: (bf) r3 = r6 16: (85) call bpf_probe_read#-46848 17: (bf) r2 = r10 18: (07) r2 += -320 19: (18) r1 = map[id:106] 21: (07) r1 += 208 22: (61) r0 = *(u32 *)(r2 +0) 23: (35) if r0 >= 0x200 goto pc+3 24: (67) r0 <<= 3 25: (0f) r0 += r1 26: (05) goto pc+1 27: (b7) r0 = 0 28: (15) if r0 == 0x0 goto pc+35 29: (71) r1 = *(u8 *)(r0 +0) 30: (15) if r1 == 0x0 goto pc+33 31: (b7) r5 = 64 32: (79) r1 = *(u64 *)(r10 -320) 33: (15) if r1 == 0x2 goto pc+2 34: (15) if r1 == 0x101 goto pc+3 35: (55) if r1 != 0x15 goto pc+19 36: (79) r3 = *(u64 *)(r6 +16) 37: (05) goto pc+1 38: (79) r3 = *(u64 *)(r6 +24) 39: (15) if r3 == 0x0 goto pc+15 40: (b7) r1 = 0 41: (63) *(u32 *)(r10 -260) = r1 42: (bf) r1 = r10 43: (07) r1 += -256 44: (b7) r2 = 256 45: (85) call bpf_probe_read_str#-46704 46: (b7) r5 = 328 47: (63) *(u32 *)(r10 -264) = r0 48: (bf) r1 = r0 49: (67) r1 <<= 32 50: (77) r1 >>= 32 51: (25) if r1 > 0xff goto pc+3 52: (07) r0 += 72 53: (57) r0 &= 255 54: (bf) r5 = r0 55: (bf) r4 = r10 56: (07) r4 += -328 57: (bf) r1 = r6 58: (18) r2 = map[id:105] 60: (18) r3 = 0xffffffff 62: (85) call bpf_perf_event_output_tp#-45104 63: (bf) r7 = r0 64: (bf) r0 = r7 65: (95) exit # Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19tools lib bpf: Introduce bpf_program__get_prog_info_linear()Song Liu3-0/+317
Currently, bpf_prog_info includes 9 arrays. The user has the option to fetch any combination of these arrays. However, this requires a lot of handling. This work becomes more tricky when we need to store bpf_prog_info to a file, because these arrays are allocated independently. This patch introduces 'struct bpf_prog_info_linear', which stores arrays of bpf_prog_info in continuous memory. Helper functions are introduced to unify the work to get different sets of bpf_prog_info. Specifically, bpf_program__get_prog_info_linear() allows the user to select which arrays to fetch, and handles details for the user. Please see the comments right before 'enum bpf_prog_info_array' for more details and examples. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf record: Replace option --bpf-event with --no-bpf-eventSong Liu4-4/+4
Currently, monitoring of BPF programs through bpf_event is off by default for 'perf record'. To turn it on, the user need to use option "--bpf-event". As BPF gets wider adoption in different subsystems, this option becomes inconvenient. This patch makes bpf_event on by default, and adds option "--no-bpf-event" to turn it off. Since option --bpf-event is not released yet, it is safe to remove it. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()Changbin Du1-0/+1
================================================================= ==20875==ERROR: LeakSanitizer: detected memory leaks Direct leak of 1160 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x55bd50005599 in zalloc util/util.h:23 #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327 #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216 #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69 #5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358 #6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388 #7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583 #8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722 #9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520 #13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 19 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f) Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Fixes: 6a6cd11d4e57 ("perf test: Add test for the sched tracepoint format fields") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf tests: Fix memory leak by expr__find_other() in test__expr()Changbin Du1-1/+4
================================================================= ==7506==ERROR: LeakSanitizer: detected memory leaks Direct leak of 13 byte(s) in 3 object(s) allocated from: #0 0x7f03339d6070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x5625e53aaef0 in expr__find_other util/expr.y:221 #2 0x5625e51bcd3f in test__expr tests/expr.c:52 #3 0x5625e51528e6 in run_test tests/builtin-test.c:358 #4 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #5 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #6 0x5625e515572f in cmd_test tests/builtin-test.c:722 #7 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #8 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #9 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #10 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #11 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Fixes: 075167363f8b ("perf tools: Add a simple expression parser for JSON") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf tests: Fix a memory leak of cpu_map object in the ↵Changbin Du1-1/+3
openat_syscall_event_on_all_cpus test ================================================================= ==7497==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45 #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103 #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120 #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135 #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36 #6 0x5625e51528e6 in run_test tests/builtin-test.c:358 #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #9 0x5625e515572f in cmd_test tests/builtin-test.c:722 #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Fixes: f30a79b012e5 ("perf tools: Add reference counting for cpu_map object") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf evsel: Free evsel->counts in perf_evsel__exit()Arnaldo Carvalho de Melo1-0/+1
Using gcc's ASan, Changbin reports: ================================================================= ==7494==ERROR: LeakSanitizer: detected memory leaks Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e5330a5e in zalloc util/util.h:23 #2 0x5625e5330a9b in perf_counts__new util/counts.c:10 #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #7 0x5625e51528e6 in run_test tests/builtin-test.c:358 #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #10 0x5625e515572f in cmd_test tests/builtin-test.c:722 #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 72 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e532560d in zalloc util/util.h:23 #2 0x5625e532566b in xyarray__new util/xyarray.c:10 #3 0x5625e5330aba in perf_counts__new util/counts.c:15 #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #8 0x5625e51528e6 in run_test tests/builtin-test.c:358 #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #11 0x5625e515572f in cmd_test tests/builtin-test.c:722 #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead. Reported-by: Changbin Du <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf top: Fix global-buffer-overflow issueChangbin Du1-0/+2
The array str[] should have six elements. ================================================================= ==4322==ERROR: AddressSanitizer: global-buffer-overflow on address 0x56463844e300 at pc 0x564637e7ad0d bp 0x7f30c8c89d10 sp 0x7f30c8c89d00 READ of size 8 at 0x56463844e300 thread T9 #0 0x564637e7ad0c in __ordered_events__flush util/ordered-events.c:316 #1 0x564637e7b0e4 in ordered_events__flush util/ordered-events.c:338 #2 0x564637c6a57d in process_thread /home/changbin/work/linux/tools/perf/builtin-top.c:1073 #3 0x7f30d173a163 in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x8163) #4 0x7f30cfffbdee in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x11adee) 0x56463844e300 is located 32 bytes to the left of global variable 'flags' defined in 'util/trace-event-parse.c:229:26' (0x56463844e320) of size 192 0x56463844e300 is located 0 bytes to the right of global variable 'str' defined in 'util/ordered-events.c:268:28' (0x56463844e2e0) of size 32 SUMMARY: AddressSanitizer: global-buffer-overflow util/ordered-events.c:316 in __ordered_events__flush Shadow bytes around the buggy address: 0x0ac947081c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c50: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 =>0x0ac947081c60:[f9]f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c70: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9 0x0ac947081c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Thread T9 created by T0 here: #0 0x7f30d179de5f in __interceptor_pthread_create (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x4ae5f) #1 0x564637c6b954 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1253 #2 0x564637c7173c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #3 0x564637d85038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #4 0x564637d85577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #5 0x564637d8597b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #6 0x564637d860e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #7 0x7f30cff0509a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 16c66bc167cc ("perf top: Add processing thread") Fixes: 68ca5d07de20 ("perf ordered_events: Add ordered_events__flush_time interface") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf maps: Purge all maps from the 'names' treeChangbin Du1-0/+15
Add function __maps__purge_names() to purge all maps from the names tree. We need to cleanup the names tree in maps__exit(). Detected with gcc's ASan. Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Eric Saint-Etienne <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Fixes: 1e6285699b30 ("perf symbols: Fix slowness due to -ffunction-section") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf map: Remove map from 'names' tree in __maps__remove()Changbin Du1-0/+3
There are two trees for each map inserted by maps__insert(), so remove it from the 'names' tree in __maps__remove(). Detected with gcc's ASan. Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Eric Saint-Etienne <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Fixes: 1e6285699b30 ("perf symbols: Fix slowness due to -ffunction-section") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf hist: Add missing map__put() in error caseChangbin Du1-1/+3
We need to map__put() before returning from failure of sample__resolve_callchain(). Detected with gcc's ASan. Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Krister Johansen <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Fixes: 9c68ae98c6f7 ("perf callchain: Reference count maps") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf top: Fix error handling in cmd_top()Changbin Du1-2/+3
We should go to the cleanup path, to avoid leaks, detected using gcc's ASan. Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf top: Delete the evlist before perf_session, fixing heap-use-after-free ↵Changbin Du1-23/+19
issue The evlist should be destroyed before the perf session. Detected with gcc's ASan: ================================================================= ==27350==ERROR: AddressSanitizer: heap-use-after-free on address 0x62b000002e38 at pc 0x5611da276999 bp 0x7ffce8f1d1a0 sp 0x7ffce8f1d190 WRITE of size 8 at 0x62b000002e38 thread T0 #0 0x5611da276998 in __list_del /home/work/linux/tools/include/linux/list.h:89 #1 0x5611da276d4a in __list_del_entry /home/work/linux/tools/include/linux/list.h:102 #2 0x5611da276e77 in list_del_init /home/work/linux/tools/include/linux/list.h:145 #3 0x5611da2781cd in thread__put util/thread.c:130 #4 0x5611da2cc0a8 in __thread__zput util/thread.h:68 #5 0x5611da2d2dcb in hist_entry__delete util/hist.c:1148 #6 0x5611da2cdf91 in hists__delete_entry util/hist.c:337 #7 0x5611da2ce19e in hists__delete_entries util/hist.c:365 #8 0x5611da2db2ab in hists__delete_all_entries util/hist.c:2639 #9 0x5611da2db325 in hists_evsel__exit util/hist.c:2651 #10 0x5611da1c5352 in perf_evsel__exit util/evsel.c:1304 #11 0x5611da1c5390 in perf_evsel__delete util/evsel.c:1309 #12 0x5611da1b35f0 in perf_evlist__purge util/evlist.c:124 #13 0x5611da1b38e2 in perf_evlist__delete util/evlist.c:148 #14 0x5611da069781 in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1645 #15 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #16 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #17 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #18 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #19 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) #20 0x5611d9ff35c9 in _start (/home/work/linux/tools/perf/perf+0x3e95c9) 0x62b000002e38 is located 11320 bytes inside of 27448-byte region [0x62b000000200,0x62b000006d38) freed by thread T0 here: #0 0x7fdccb04ab70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70) #1 0x5611da260df4 in perf_session__delete util/session.c:201 #2 0x5611da063de5 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1300 #3 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #4 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #5 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #6 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #7 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #8 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) previously allocated by thread T0 here: #0 0x7fdccb04b138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5611da26010c in zalloc util/util.h:23 #2 0x5611da260824 in perf_session__new util/session.c:118 #3 0x5611da0633a6 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1192 #4 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #5 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) SUMMARY: AddressSanitizer: heap-use-after-free /home/work/linux/tools/include/linux/list.h:89 in __list_del Shadow bytes around the buggy address: 0x0c567fff8570: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8580: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd =>0x0c567fff85c0: fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd fd fd 0x0c567fff85d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85e0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85f0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8610: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==27350==ABORTING Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf build-id: Fix memory leak in print_sdt_events()Changbin Du2-0/+2
Detected with gcc's ASan: Direct leak of 4356 byte(s) in 120 object(s) allocated from: #0 0x7ff1a2b5a070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x55719aef4814 in build_id_cache__origname util/build-id.c:215 #2 0x55719af649b6 in print_sdt_events util/parse-events.c:2339 #3 0x55719af66272 in print_events util/parse-events.c:2542 #4 0x55719ad1ecaa in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58 #5 0x55719aec745d in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x55719aec7d1a in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x55719aec8184 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x55719aeca41a in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7ff1a07ae09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Fixes: 40218daea1db ("perf list: Show SDT and pre-cached events") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-19perf config: Fix a memory leak in collect_config()Changbin Du1-2/+1
Detected with gcc's ASan: Direct leak of 66 byte(s) in 5 object(s) allocated from: #0 0x7ff3b1f32070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x560c8761034d in collect_config util/config.c:597 #2 0x560c8760d9cb in get_value util/config.c:169 #3 0x560c8760dfd7 in perf_parse_file util/config.c:285 #4 0x560c8760e0d2 in perf_config_from_file util/config.c:476 #5 0x560c876108fd in perf_config_set__init util/config.c:661 #6 0x560c87610c72 in perf_config_set__new util/config.c:709 #7 0x560c87610d2f in perf_config__init util/config.c:718 #8 0x560c87610e5d in perf_config util/config.c:730 #9 0x560c875ddea0 in main /home/changbin/work/linux/tools/perf/perf.c:442 #10 0x7ff3afb8609a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Taeung Song <[email protected]> Fixes: 20105ca1240c ("perf config: Introduce perf_config_set class") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.