| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
According to the datasheet of R-Car Gen3, the Pn_RAMMAP.Pn_MPKT should
be set to one of 8, 16, 32, 64, 512 and 1024. Otherwise, when a gadget
driver uses an interrupt endpoint, unexpected behavior happens. So,
this patch fixes it.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: <[email protected]> # v4.5+
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
|
|
When bRequestType & USB_DIR_IN is false and req.length is 0 in control
transfer, since it means non-data, this driver should not set the mode
as control write. So, this patch fixes it.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: <[email protected]> # v4.5+
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
|
|
A recent change to the synchronization in dummy-hcd was incorrect.
The issue was that dummy_udc_stop() contained no locking and therefore
could race with various gadget driver callbacks, and the fix was to
add locking and issue the callbacks with the private spinlock held.
UDC drivers aren't supposed to do this. Gadget driver callback
routines are allowed to invoke functions in the UDC driver, and these
functions will generally try to acquire the private spinlock. This
would deadlock the driver.
The correct solution is to drop the spinlock before issuing callbacks,
and avoid races by emulating the synchronize_irq() call that all real
UDC drivers must perform in their ->udc_stop() routines after
disabling interrupts. This involves adding a flag to dummy-hcd's
private structure to keep track of whether interrupts are supposed to
be enabled, and adding a counter to keep track of ongoing callbacks so
that dummy_udc_stop() can wait for them all to finish.
A real UDC driver won't receive disconnect, reset, suspend, resume, or
setup events once it has disabled interrupts. dummy-hcd will receive
them but won't try to issue any gadget driver callbacks, which should
be just as good.
Signed-off-by: Alan Stern <[email protected]>
Fixes: f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks")
CC: <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
|
|
The dummy-hcd HCD/UDC emulator tries not to do too much work during
each timer interrupt. But it doesn't try very hard; currently all
it does is limit the total amount of bulk data transferred. Other
transfer types aren't limited, and URBs that transfer no data (because
of an error, perhaps) don't count toward the limit, even though on a
real USB bus they would consume at least a minimum overhead.
This means it's possible to get the driver stuck in an infinite loop,
for example, if the host class driver resubmits an URB every time it
completes (which is common for interrupt URBs). Each time the URB is
resubmitted it gets added to the end of the pending-URBs list, and
dummy-hcd doesn't stop until that list is empty. Andrey Konovalov was
able to trigger this failure mode using the syzkaller fuzzer.
This patch fixes the infinite-loop problem by restricting the URBs
handled during each timer interrupt to those that were already on the
pending list when the interrupt routine started. Newly added URBs
won't be processed until the next timer interrupt. The problem of
properly accounting for non-bulk bandwidth (as well as packet and
transaction overhead) is not addressed here.
Signed-off-by: Alan Stern <[email protected]>
Reported-by: Andrey Konovalov <[email protected]>
Tested-by: Andrey Konovalov <[email protected]>
CC: <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
|
|
The dummy-hcd UDC driver is not careful about the way it handles
connection speeds. It ignores the module parameter that is supposed
to govern the maximum connection speed and it doesn't set the HCD
flags properly for the case where it ends up running at full speed.
The result is that in many cases, gadget enumeration over dummy-hcd
fails because the bMaxPacketSize byte in the device descriptor is set
incorrectly. For example, the default settings call for a high-speed
connection, but the maxpacket value for ep0 ends up being set for a
Super-Speed connection.
This patch fixes the problem by initializing the gadget's max_speed
and the HCD flags correctly.
Signed-off-by: Alan Stern <[email protected]>
CC: <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
|
|
As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end
up using different filters. Once we drop ->siglock it is possible for
task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC.
Fixes: f8e529ed941b ("seccomp, ptrace: add support for dumping seccomp filters")
Reported-by: Chris Salls <[email protected]>
Cc: [email protected] # needs s/refcount_/atomic_/ for v4.12 and earlier
Signed-off-by: Oleg Nesterov <[email protected]>
[tycho: add __get_seccomp_filter vs. open coding refcount_inc()]
Signed-off-by: Tycho Andersen <[email protected]>
[kees: tweak commit log]
Signed-off-by: Kees Cook <[email protected]>
|
|
Arnd Bergmann reported a bunch of warnings like:
crypto/jitterentropy.o: warning: objtool: jent_fold_time()+0x3b: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_stuck()+0x1d: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_unbiased_bit()+0x15: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_read_entropy()+0x32: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_entropy_collector_free()+0x19: call without frame pointer save/setup
and
arch/x86/events/core.o: warning: objtool: collect_events uses BP as a scratch register
arch/x86/events/core.o: warning: objtool: events_ht_sysfs_show()+0x22: call without frame pointer save/setup
With certain rare configurations, GCC sometimes sets up the frame
pointer with:
lea (%rsp),%rbp
instead of:
mov %rsp,%rbp
The instructions are equivalent, so treat the former like the latter.
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/a468af8b28a69b83fffc6d7668be9b6fcc873699.1506526584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The kbuild bot occasionally reports warnings like:
drivers/scsi/pcmcia/aha152x_core.o: warning: objtool: seldo_run()+0x130: unreachable instruction
These warnings are always with GCC 4.4. That version of GCC sometimes
places unreachable instructions after calls to noreturn functions.
The unreachable warnings aren't very important anyway. Just ignore them
for old versions of GCC.
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/bc89b807d965b98ec18a0bb94f96a594bd58f2f2.1506551639.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Smatch is screaming:
drivers/net/ethernet/mellanox/mlx5/core/sriov.c:112
mlx5_device_enable_sriov() warn: inconsistent indenting
fix that.
Fixes: 7ecf6d8ff154 ('IB/mlx5: Restore IB guid/policy for virtual functions')
Signed-off-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Fix this sparse complaint:
drivers/net/ethernet/mellanox/mlx5/core/./diag/fs_tracepoint.h:172:1:
warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
Fixes: d9fea79171ee ('net/mlx5: Add tracepoints')
Signed-off-by: Matan Barak <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Instead of calculating the offloads counters, count them explicitly.
The calculations done for these counters would result in bugs in some
cases, for example:
When running TCP traffic over a VXLAN tunnel with TSO enabled the following
counters would increase:
tx_csum_partial: 1,333,284
tx_csum_partial_inner: 29,286
tx4_csum_partial_inner: 384
tx7_csum_partial_inner: 8
tx9_csum_partial_inner: 34
tx10_csum_partial_inner: 26,807
tx11_csum_partial_inner: 287
tx12_csum_partial_inner: 27
tx16_csum_partial_inner: 6
tx25_csum_partial_inner: 1,733
Seems like tx_csum_partial increased out of nowhere.
The issue is in the following calculation in mlx5e_update_sw_counters:
s->tx_csum_partial = s->tx_packets - tx_offload_none - s->tx_csum_partial_inner;
While tx_packets increases by the number of GSO segments for each SKB,
tx_csum_partial_inner will only increase by one, resulting in wrong
tx_csum_partial counter.
Fixes: bfe6d8d1d433 ("net/mlx5e: Reorganize ethtool statistics")
Signed-off-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Toggling of C-tag VLAN filter should not affect the "any S-tag" steering rule.
Fixes: 8a271746a264 ("net/mlx5e: Receive s-tagged packets in promiscuous mode")
Signed-off-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Use the correct formatting for netdev features.
Fixes: 0e405443e803 ("net/mlx5e: Improve set features ndo resiliency")
Signed-off-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Encap entries cached by the driver could be invalidated due to
tunnel destination neighbour state changes.
When attempting to offload a flow that uses a cached encap entry,
we must check the entry validity and defer the offloading
if the entry exists but not valid.
When EAGAIN is returned, the flow offloading to hardware takes place
by the neigh update code when the tunnel destination neighbour
becomes connected.
Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow")
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
When offloading header re-write, the HW may need to adjust checksums along
the packet. For IP traffic, and a case where we are asked to modify fields in
the IP header, current HW supports that only for TCP and UDP. Enforce it, in
this case fail the offloading attempt for non TCP/UDP packets.
Fixes: d7e75a325cb2 ('net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions')
Fixes: 2f4fe4cab073 ('net/mlx5e: Add offloading of NIC TC pedit (header re-write) actions')
Signed-off-by: Or Gerlitz <[email protected]>
Reviewed-by: Paul Blakey <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
In case the neighbour for the tunnel destination isn't valid,
we send a neighbour update request but we free the encap
header buffer. This is wrong, because we still need it for
allocating a HW encap entry once the neighbour is available.
Fix that by skipping freeing it if we wait for neighbour.
Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow')
Signed-off-by: Paul Blakey <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Added check for the maximal number of flow counters attached
to rule (FTE).
Fixes: bd5251dbf156b ('net/mlx5_core: Introduce flow steering destination of type counter')
Signed-off-by: Raed Salem <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Currently, FPGA capability is located in (mdev)->caps.hca_cur,
change the location to be (mdev)->caps.fpga,
since hca_cur is reserved for HCA device capabilities.
Fixes: e29341fb3a5b ("net/mlx5: FPGA, Add basic support for Innova")
Signed-off-by: Inbar Karmy <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
When cleaning rdma netdevice we need to save the mdev pointer
because priv is released when we release netdev.
This bug was found using the kernel address sanitizer (KASAN).
use-after-free in mlx5_rdma_netdev_free+0xe3/0x100 [mlx5_core]
Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
static checker reports a potential integer overflow. Cap the worker count to
avoid the overflow.
Reported:-by: Dan Carpenter <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
|
|
raid_map calls pers->make_request, which missed the suspend check. Fix it with
the new md_handle_request API.
Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: Heinz Mauelshagen <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: [email protected]
Reviewed-by: NeilBrown <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
|
|
md_submit_flush_data calls pers->make_request, which missed the suspend check.
Fix it with the new md_handle_request API.
Reported-by: Nate Dailey <[email protected]>
Tested-by: Nate Dailey <[email protected]>
Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: [email protected]
Reviewed-by: NeilBrown <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
|
|
With commit cc27b0c78c79, pers->make_request could bail out without handling
the bio. If that happens, we should retry. The commit fixes md_make_request
but not other call sites. Separate the request handling part, so other call
sites can use it.
Reported-by: Nate Dailey <[email protected]>
Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: [email protected]
Reviewed-by: NeilBrown <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
|
|
ASC 0x27 is "WRITE PROTECTED". This error code is returned e.g. by
Fujitsu ETERNUS systems under certain conditions for WRITE SAME 16
commands with UNMAP bit set. It should not be treated as a path
error. In general, it makes sense to assume that being write protected
is a target rather than a path property.
Signed-off-by: Martin Wilck <[email protected]>
Acked-by: Lee Duncan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Commit 0e9973ed3382 ("scsi: aacraid: Add periodic checks to see IOP reset
status") changed the way driver checks if a reset succeeded. Now, after an
IOP reset, aacraid immediately start polling a register to verify the reset
is complete.
This behavior cause regressions on the reset path in PowerPC (at least).
Since the delay after the IOP reset was removed by the aforementioned patch,
the fact driver just starts to read a register instantly after the reset
was issued (by writing in another register) "corrupts" the reset procedure,
which ends up failing all the time.
The issue highly impacted kdump on PowerPC, since on kdump path we
proactively issue a reset in adapter (through the reset_devices kernel
parameter).
This patch (re-)adds a delay right after IOP reset is issued. Empirically
we measured that 3 seconds is enough, but for safety reasons we delay
for 5s (and since it was 30s before, 5s is still a small amount).
For reference, without this patch we observe the following messages
on kdump kernel boot process:
[ 76.294] aacraid 0003:01:00.0: IOP reset failed
[ 76.294] aacraid 0003:01:00.0: ARC Reset attempt failed
[ 86.524] aacraid 0003:01:00.0: adapter kernel panic'd ff.
[ 86.524] aacraid 0003:01:00.0: Controller reset type is 3
[ 86.524] aacraid 0003:01:00.0: Issuing IOP reset
[146.534] aacraid 0003:01:00.0: IOP reset failed
[146.534] aacraid 0003:01:00.0: ARC Reset attempt failed
Fixes: 0e9973ed3382 ("scsi: aacraid: Add periodic checks to see IOP reset status")
Cc: [email protected] # v4.13+
Signed-off-by: Guilherme G. Piccoli <[email protected]>
Acked-by: Dave Carroll <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Commit 33fc30b47098 (cpufreq: intel_pstate: Document the current
behavior and user interface) dropped the intel-pstate.txt file
from Documentation/cpu-freq/, but it did not update the index.txt
file in there accordingly, so do that now.
Fixes: 33fc30b47098 (cpufreq: intel_pstate: Document the current behavior and user interface)
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
From David Howells:
"There are two sets of patches here:
(1) A bunch of core keyrings bug fixes from Eric Biggers.
(2) Fixing big_key to use safe crypto from Jason A. Donenfeld."
|
|
This patch fixes the starting offset used when scanning chunks to
compute the chunk statistics. The value start_offset (and end_offset)
are managed in bytes while the traversal occurs over bits. Thus for the
reserved and dynamic chunk, it may incorrectly skip over the initial
allocations.
Signed-off-by: Dennis Zhou <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Currently we acknowledge errors before clearing the error status.
This could cause a new error to be populated by firmware in-between
the error acknowledgment and the error status clearing which would
cause the second error's status to be cleared without being handled.
So, clear the error status before acknowledging the errors.
Also, make sure to acknowledge the error if the error status read
fails.
Signed-off-by: Tyler Baicar <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Commit 09b3efec ("bcache: Don't reinvent the wheel but use existing llist
API") replaces the following while loop by llist_for_each_entry(),
-
- while (reverse) {
- cl = container_of(reverse, struct closure, list);
- reverse = llist_next(reverse);
-
+ llist_for_each_entry(cl, reverse, list) {
closure_set_waiting(cl, 0);
closure_sub(cl, CLOSURE_WAITING + 1);
}
This modification introduces a potential race by iterating a corrupted
list. Here is how it happens.
In the above modification, closure_sub() may wake up a process which is
waiting on reverse list. If this process decides to wait again by calling
closure_wait(), its cl->list will be added to another wait list. Then
when llist_for_each_entry() continues to iterate next node, it will travel
on another new wait list which is added in closure_wait(), not the
original reverse list in __closure_wake_up(). It is more probably to
happen on UP machine because the waked up process may preempt the process
which wakes up it.
Use llist_for_each_entry_safe() will fix the issue, the safe version fetch
next node before waking up a process. Then the copy of next node will make
sure list iteration stays on original reverse list.
Fixes: 09b3efec81de ("bcache: Don't reinvent the wheel but use existing llist API")
Signed-off-by: Coly Li <[email protected]>
Reported-by: Michael Lyle <[email protected]>
Reviewed-by: Byungchul Park <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
into drm-fixes
A few fixes for 4.14. Nothing too major.
* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: disable hard reset in hibernate for APUs
drm/amdgpu: revert tile table update for oland
|
|
into drm-fixes
Just two small etnaviv fixes, one fixing a list corruption, the other
fixing a NULL ptr deref in an error path.
* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
etnaviv: fix gem object list corruption
etnaviv: fix submit error path
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-fixes
It contains the following fixes:
- correct checking of return value
- send correct parameter to function (According to the parameter type)
- avoid spamming of dmesg log
- fix queue wrapping calculations
* tag 'drm-amdkfd-fixes-2017-09-24' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Print event limit messages only once per process
drm/amdkfd: Fix kernel-queue wrapping bugs
drm/amdkfd: Fix incorrect destroy_mqd parameter
drm/amdkfd: check for null dev to avoid a null pointer dereference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and isofs fixes from Jan Kara:
"Two quota fixes (fallout of the quota locking changes) and an isofs
build fix"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix quota corruption with generic/232 test
isofs: fix build regression
quota: add missing lock into __dquot_transfer()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of:
- fixes to several existing tests
- a test for regression introduced by b9470c27607b ("inet: kill
smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results"
* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
selftests: timers: set-timer-lat: fix hang when std out/err are redirected
selftests/memfd: correct run_tests.sh permission
selftests/seccomp: Support glibc 2.26 siginfo_t.h
selftests: futex: Makefile: fix for loops in targets to run silently
selftests: Makefile: fix for loops in targets to run silently
selftests: mqueue: Use full path to run tests from Makefile
selftests: futex: copy sub-dir test scripts for make O=dir run
selftests: lib.mk: copy test scripts and test files for make O=dir run
selftests: sync: kselftest and kselftest-clean fail for make O=dir case
selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
selftests: lib.mk: fix test executable status check to use full path
selftests: Makefile: clear LDFLAGS for make O=dir use-case
selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
Makefile: kselftest and kselftest-clean fail for make O=dir case
selftests/net: msg_zerocopy enable build with older kernel headers
selftests: actually run the various net selftests
selftest: add a reuseaddr test
...
|
|
When calculating the size needed by struct atmel_pmecc_user *user,
the dmu and delta buffer sizes were forgotten.
This lead to a memory corruption (especially with a large ecc_strength).
Link: http://lkml.kernel.org/r/[email protected]
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Cc: [email protected]
Reported-by: Richard Genoud <[email protected]>
Pointed-at-by: Boris Brezillon <[email protected]>
Signed-off-by: Richard Genoud <[email protected]>
Reviewed-by: Nicolas Ferre <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu fixes and cleanups from Ingo Molnar:
"This is _way_ more cleanups than fixes, but the bugs were subtle and
hard to hit, and the primary reason for them existing was the
unnecessary historical complexity of some of the x86/fpu interfaces.
The first bunch of commits clean up and simplify the xstate user copy
handling functions, in reaction to the collective head-scratching
about the xstate user-copy handling code that leads up to the fix for
this SkyLake xstate handling bug:
0852b374173b: x86/fpu: Add FPU state copying quirk to handle XRSTOR failure on Intel Skylake CPUs
The cleanups don't change any functionality, they just (hopefully)
make it all clearer, more consistent, more debuggable and more robust.
Note that most of the linecount increase comes from these commits,
where we better split the user/kernel copy logic by having more
variants, instead repeated fragile patterns of:
if (kbuf) {
memcpy(kbuf + pos, data, copy);
} else {
if (__copy_to_user(ubuf + pos, data, copy))
return -EFAULT;
}
The next bunch of commits simplify the FPU state-machine to get rid of
old lazy-FPU idiosyncrasies - a defensive simplification to make all
the code easier to review and fix. No change in functionality.
Then there's a couple of additional debugging tweaks: static checker
warning fix and move an FPU related warning to under WARN_ON_FPU(),
followed by another bunch of commits that represent a finegrained
split-up of the fixes from Eric Biggers to handle weird xstate bits
properly.
I did this finegrained split-up because some of these fixes also
impact the ABI for weird xstate handling, for which we'd like to have
good bisection results, should they cause any problems. (We also had
one regression with the more monolithic fixes, so splitting it all up
sounded prudent for robustness reasons as well.)
About the whole series: the commits up to 03eaec81ac09 have been in
-next for months - but I've recently rebased them to remove a state
machine clean-up commit that was objected to, and to make it more
bisectable - so technically it's a new, rebased tree.
Robustness history: this series had some regressions along the way,
and all reported regressions have been fixed. All but one of the
regressions manifested itself as easy to report warnings. The previous
version of this latest series was also in linux-next, with one
(warning-only) regression reported which is fixed in the latest
version.
Barring last minute brown paper bag bugs (and the commits are now
older by a day which I'd hope helps paperbag reduction), I'm
reasonably confident about its general robustness.
Famous last words ..."
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/fpu: Use using_compacted_format() instead of open coded X86_FEATURE_XSAVES
x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_user_to_xstate()
x86/fpu: Eliminate the 'xfeatures' local variable in copy_user_to_xstate()
x86/fpu: Copy the full header in copy_user_to_xstate()
x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_kernel_to_xstate()
x86/fpu: Eliminate the 'xfeatures' local variable in copy_kernel_to_xstate()
x86/fpu: Copy the full state_header in copy_kernel_to_xstate()
x86/fpu: Use validate_xstate_header() to validate the xstate_header in __fpu__restore_sig()
x86/fpu: Use validate_xstate_header() to validate the xstate_header in xstateregs_set()
x86/fpu: Introduce validate_xstate_header()
x86/fpu: Rename fpu__activate_fpstate_read/write() to fpu__prepare_[read|write]()
x86/fpu: Rename fpu__activate_curr() to fpu__initialize()
x86/fpu: Simplify and speed up fpu__copy()
x86/fpu: Fix stale comments about lazy FPU logic
x86/fpu: Rename fpu::fpstate_active to fpu::initialized
x86/fpu: Remove fpu__current_fpstate_write_begin/end()
x86/fpu: Fix fpu__activate_fpstate_read() and update comments
x86/fpu: Reinitialize FPU registers if restoring FPU state fails
x86/fpu: Don't let userspace set bogus xcomp_bv
x86/fpu: Turn WARN_ON() in context switch into WARN_ON_FPU()
...
|
|
Failure to tune PCIe capabilities should not fail driver load. This can
cause the driver load to fail on systems with any of the following:
1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge.
2. HFI's parent is not PCI Express capable.
In these situations, failure to tune PCIe capabilities should be logged
in the system message logs but not cause the driver load to fail.
This patch also ensures pcie capability word DevCtl is written only
after a successful read and the capability tuning process continues
even if read/write of the pcie capability word DevCtl fails.
Fixes: c53df62c7a9a ("IB/hfi1: Check return values from PCI config API calls")
Fixes: bf70a7757736 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver")
Reviewed-by: Michael J. Ruhl <[email protected]>
Reviewed-by: Mike Marciniszyn <[email protected]>
Reviewed-by: Jakub Byczkowski <[email protected]>
Signed-off-by: Harish Chegondi <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
During base context setup, if setup_base_ctxt() fails, the context is
deallocated. This is incorrect because the context is referenced on
return, to notify any waiting subcontext. If there are no subcontexts
the pointer will be invalid.
Reorganize the error path so that deallocate_ctxt() is called after all
the possible subcontexts have been notified.
Reviewed-by: Ira Weiny <[email protected]>
Signed-off-by: Michael J. Ruhl <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
commit 9a9b8112699d will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.
IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
if (priv->broadcast) {
rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
list_add_tail(&priv->broadcast->list, &remove_list);
priv->broadcast = NULL;
}
...
then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
broadcast = ipoib_mcast_alloc(dev, 0);
...
memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid));
priv->broadcast = broadcast;
...
Fixes: 9a9b8112699d ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: [email protected]
Reviewed-by: Mike Marciniszyn <[email protected]>
Reviewed-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Alex Estrin <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Reviewed-by: Feras Daoud <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
The general interrupt handler returns IRQ_HANDLED whether an IRQ
was handled or not.
Determine if an IRQ was handled and return the correct value.
Reviewed-by: Dennis Dalessandro <[email protected]>
Reviewed-by: Michael J. Ruhl <[email protected]>
Signed-off-by: Kamenee Arumugam <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
Relying on a trailing magic value is incorrect. There are instances where
this is not present as trailing magic value has a specific purpose which is
not partition validation. Instead use the header magic value which is
present in all variants of the platform configuration and is intended for
validation. This is also used in other locations in the driver.
Fixes: bc5214ee2922 (IB/hfi1: Handle missing magic values in config file)
Reviewed-by: Jakub Byczkowski <[email protected]>
Signed-off-by: Jan Sokolowski <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
QSFP reset enables AOC transmitters by default. They should be off
before moving to high power mode to complete the setup. There is no
need to reset the QSFP during LNI failure as it was reset at link down.
Reviewed-by: Mike Marciniszyn <[email protected]>
Reviewed-by: Jakub Byczkowski <[email protected]>
Signed-off-by: Sebastian Sanchez <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
Offline.quietDuration was added in the 8051 firmware, and the driver
only turns off the AOC transmitters when offline.quiet is reached.
However, the AOC transmitters need to be turned off at the new state.
Therefore, turn off the AOC transmitters at any offline substates
including offline.quiet and offline.quietDuration, then recheck we
reached offline.quiet to support backwards compatibility.
Reviewed-by: Jakub Byczkowski <[email protected]>
Reviewed-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Sebastian Sanchez <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
The definition of map_sg was split during a recent addition to iommu_ops.
Put it back together.
Fixes: add02cfdc9bc ("iommu: Introduce Interface for IOMMU TLB Flushing")
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
pr_err() messages should end with a new-line to avoid other messages
being concatenated. So replace '/n' with '\n'.
Signed-off-by: Arvind Yadav <[email protected]>
Fixes: 45a01c42933b ('iommu/amd: Add function copy_dev_tables()')
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The ARM short descriptor has already limited the physical address
to 32bit after the commit <76557391433c> ("iommu/io-pgtable: Sanitise
map/unmap addresses"). But in MediaTek 4GB mode, the physical address
is from 0x1_0000_0000 to 0x1_ffff_ffff. this will cause:
WARNING: CPU: 4 PID: 3900 at
xxx/drivers/iommu/io-pgtable-arm-v7s.c:482 arm_v7s_map+0x40/0xf8
Modules linked in:
CPU: 4 PID: 3900 Comm: weston Tainted: G S W 4.9.44 #1
Hardware name: MediaTek MT2712m1v1 board (DT)
task: ffffffc0eaa5b280 task.stack: ffffffc0e9858000
PC is at arm_v7s_map+0x40/0xf8
LR is at mtk_iommu_map+0x64/0x90
pc : [<ffffff80085b09e8>] lr : [<ffffff80085b29fc>] pstate: 000001c5
sp : ffffffc0e985b920
x29: ffffffc0e985b920 x28: 0000000127d00000
x27: 0000000000100000 x26: ffffff8008f9e000
x25: 0000000000000003 x24: 0000000000100000
x23: 0000000127d00000 x22: 00000000ff800000
x21: ffffffc0f7ec8ce0 x20: 0000000000000003
x19: 0000000000000003 x18: 0000000000000002
x17: 0000007f7e5d72c0 x16: ffffff80082b0f08
x15: 0000000000000001 x14: 000000000000003f
x13: 0000000000000000 x12: 0000000000000028
x11: 0088000000000000 x10: 0000000000000000
x9 : ffffff80092fa000 x8 : ffffffc0e9858000
x7 : ffffff80085b29d8 x6 : 0000000000000000
x5 : ffffff80085b09a8 x4 : 0000000000000003
x3 : 0000000000100000 x2 : 0000000127d00000
x1 : 00000000ff800000 x0 : 0000000000000001
...
Call trace:
[<ffffff80085b09e8>] arm_v7s_map+0x40/0xf8
[<ffffff80085b29fc>] mtk_iommu_map+0x64/0x90
[<ffffff80085ab5f8>] iommu_map+0x100/0x3a0
[<ffffff80085ab99c>] default_iommu_map_sg+0x104/0x168
[<ffffff80085aead8>] iommu_dma_alloc+0x238/0x3f8
[<ffffff8008098b30>] __iommu_alloc_attrs+0xa8/0x260
[<ffffff80085f364c>] mtk_drm_gem_create+0xac/0x180
[<ffffff80085f3894>] mtk_drm_gem_dumb_create+0x54/0xc8
[<ffffff80085d576c>] drm_mode_create_dumb_ioctl+0xa4/0xd8
[<ffffff80085cb2a0>] drm_ioctl+0x1c0/0x490
In order to satify this, Limit the physical address to 32bit.
Signed-off-by: Yong Wu <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Fix the commit 81b3c2521844 ("iommu/io-pgtable: Introduce explicit
coherency"). If there is no IO_PGTABLE_QUIRK_NO_DMA, we should call
dma_sync_single_for_device for cache synchronization.
Signed-off-by: Yong Wu <[email protected]>
Fixes: 81b3c2521844 ('iommu/io-pgtable: Introduce explicit coherency')
Reviewed-by: Robin Murphy <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Commit 1eeef2d7483a ("mtd: handle partitioning on devices with 0
erasesize") introduced a regression on heterogeneous erase region
devices. Alignment of the partition was tested against the master
eraseblock size which can be bigger than the slave one, thus leading
to some partitions being marked as read-only.
Update wr_alignment to match this slave erasesize after this erasesize
has been determined by picking the biggest erasesize of all the regions
embedded in the MTD partition.
Reported-by: Mathias Thore <[email protected]>
Fixes: 1eeef2d7483a ("mtd: handle partitioning on devices with 0 erasesize")
Cc: <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Tested-by: Mathias Thore <[email protected]>
Reviewed-by: Mathias Thore <[email protected]>
|
|
The simplify part: do not touch pi_desc.nv, we can set it when the
VCPU is first created. Likewise, pi_desc.sn is only handled by
vmx_vcpu_pi_load, do not touch it in __pi_post_block.
The fix part: do not check kvm_arch_has_assigned_device, instead
check the SN bit to figure out whether vmx_vcpu_pi_put ran before.
This matches what the previous patch did in pi_post_block.
Cc: Huangweidong <[email protected]>
Cc: Gonglei <[email protected]>
Cc: wangxin <[email protected]>
Cc: Radim Krčmář <[email protected]>
Tested-by: Longpeng (Mike) <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|