aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-06-16fbdev: add video modes for resolutions and timings of PAL RGBPaul Menzel1-0/+8
This patch was taken from vga-sync-field version 0.0.3 [1][2]. [1] http://lowbyte.de/vga-sync-fields/vga-sync-fields-0.0.3.tgz [2] http://git.hellersdorfer-jugendchor.de/?p=3Dvga2scart.git;a=3Dcommit;h= =3Dc5c8ed6c51fc9879dbf38d8b91d5db6f4300ea03 Signed-off-by: Thomas Hilber <[email protected]> Signed-off-by: Paul Menzel <[email protected]> Cc: Krzysztof Helt <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16fbdev: move logo externs to header fileGeert Uytterhoeven7-39/+28
Now we have __initconst, we can finally move the external declarations for the various Linux logo structures to <linux/linux_logo.h>. James' ack dates back to the previous submission (way to long ago), when the logos were still __initdata, which caused failures on some platforms with some toolchain versions. Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: James Simmons <[email protected]> Cc: Krzysztof Helt <[email protected]> Cc: Sam Ravnborg <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16fbdev: generated logo sources depend on scripts/pnmtologoSam Ravnborg1-5/+7
The generated logo sources are not automatically regenerated if scripts/pnmtologo.c has changed. Add the missing dependency to fix this. Signed-off-by: Sam Ravnborg <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Cc: Krzysztof Helt <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16lis3: add click functionDaniel Mack4-1/+78
The LIS302DL accelerometer chip has a 'click' feature which can be used to detect sudden motion on any of the three axis. Configuration data is passed via spi platform_data and no action is taken if that's not specified, so it won't harm any existing platform. To make the configuration effective, the IRQ lines need to be set up appropriately. This patch also adds a way to do that from board support code. The DD_* definitions were factored out to an own enum because they are specific to LIS3LV02D devices. Signed-off-by: Daniel Mack <[email protected]> Acked-by: Pavel Machek <[email protected]> Acked-by: Eric Piel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16lis3: add three new laptop modelsEric Piel1-2/+5
Separate the 6710 and 6715, and set the right axis information for the 6715. Reported-by: Isaac702 <[email protected]> Add the 6930. Reported-by: Christian Weidle <[email protected]> Add the 2710. Reported-by: Pavel Herrmann <[email protected]> Signed-off-by: Eric Piel <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16lis3: use input_polled_deviceEric Piel4-55/+29
Now that there is no need to hookup on the open/close of the joystick, it's possible to use the simplified interface input_polled_device, instead of creating our own kthread. [[email protected]: fix Kconfig] [[email protected]: fix Kconfig some more] Signed-off-by: Eric Piel <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16lis3: remove automatic shutdown of the deviceEric Piel3-71/+32
After measurement on my laptop, it seems that turning off the device does not bring any energy saving (within 0.1W precision). So let's keep the device always on. It simplifies the code, and it avoids the problem of reading a wrong value sometimes just after turning the device on. Moreover, since commit ef2cfc790bf5f0ff189b01eabc0f4feb5e8524df had been too zealous, the device was actually never turned off anyway. This patch also restores the damages done by this commit concerning the initialisation/poweroff. Also do more clean up with the usage of the lis3_dev global variable. Signed-off-by: Eric Piel <[email protected]> Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16lis3: fix misc device unregistering and printkEric Piel1-5/+2
Can only unregister the misc device if it was registered before. Also remove debugging messages, which in addition were not properly formated. Signed-off-by: Eric Piel <[email protected]> Acked-by: Pavel Machek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16rb_tree: remove redundant if()-condition in rb_erase()Wolfram Strepp1-4/+4
Furthermore, notice that the initial checks: if (!node->rb_left) child = node->rb_right; else if (!node->rb_right) child = node->rb_left; else { ... } guarantee that old->rb_right is set in the final else branch, therefore we can omit checking that again. Signed-off-by: Wolfram Strepp <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16rb_tree: make clear distinction between two different cases in rb_erase()Wolfram Strepp1-4/+4
There are two cases when a node, having 2 childs, is erased: 'normal case': the successor is not the right-hand-child of the node to be erased 'special case': the successor is the right-hand child of the node to be erased Here some ascii-art, with following symbols (referring to the code): O: node to be deleted N: the successor of O P: parent of N C: child of N L: some other node normal case: O N / \ / \ / \ / \ L \ L \ / \ P ----> / \ P / \ / \ / / N C \ / \ \ C / \ special case: O|P N / \ / \ / \ / \ L \ L \ / \ N ----> / C \ / \ \ C / \ Notice that for the special case we don't have to reconnect C to N. Signed-off-by: Wolfram Strepp <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16rb_tree: reorganize code in rb_erase() for additional changesWolfram Strepp1-9/+9
First, move some code around in order to make the next change more obvious. [[email protected]: coding-style fixes] Signed-off-by: Peter Zijlstra <[email protected]> Signed-off-by: Wolfram Strepp <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16MAINTAINERS: add file patterns to TTY LAYERJoe Perches1-0/+5
Signed-off-by: Joe Perches <[email protected]> Cc: Alan Cox <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16MAINTAINERS: add Paul McKenney to RCU and RCUTORTUREJoe Perches1-0/+4
Signed-off-by: Joe Perches <[email protected]> Acked-by: Paul E. McKenney <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16MAINTAINERS: add file pattern to CISCO FCOE HBA DRIVERJoe Perches1-0/+1
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16MAINTAINERS: mention scripts/get_maintainer.pl in the prefaceJoe Perches1-0/+6
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16MAINTAINERS: remove L: [email protected] from all but "THE REST"Joe Perches1-81/+0
lkml is added to all CC lists via pattern matching on "THE REST" Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16MAINTAINERS: mark ALSA lists as moderatedJoe Perches1-5/+5
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16MAINTAINERS: update M32R file patterns after renameJoe Perches1-1/+0
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16MAINTAINERS: add file patterns to "THE REST"Joe Perches1-0/+5
These file patterns match all sources. By default, scripts/get_maintainers.pl excludes Linus Torvalds from the CC: list. Option --git-chief-penguins will include him. Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16MAINTAINERS: swap mismarked ECRYPT FS M: and P: entriesJoe Perches1-2/+2
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: change "die" to "warn" when command line file is ↵Joe Perches1-1/+1
not a patch fixes git send-email with a cover letter Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: allow 8 bit characters in email addressesJoe Perches1-1/+1
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: don't print maintainers when not requestedJoe Perches1-4/+6
Fixed bug introduced after using rfc822 address checking. Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: support both "P:/M:" and integrated "M:" linesJoe Perches1-8/+22
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: better email name quotingJoe Perches1-0/+1
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: support M: lines with names and multiple entries ↵Joe Perches1-16/+129
per M: line Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: warn on missing git or git repositoryJoe Perches1-3/+12
support older versions of grep (use -E not -P) no need to return data in routine recent_git_signoffs Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: improve --git-chief-penquins (Linus Torvalds) ↵Joe Perches1-15/+12
filtering Moved [email protected] to MAINTAINERS lkml will be added to all CC lists via F: pattern match Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: better fix for subscriber-only mailing listsJoe Perches1-1/+1
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16scripts/get_maintainer.pl: output first field only in mailing lists and ↵Joe Perches1-19/+27
after maintainers. Fix mailing lists that are described, but not "(subscriber-only)" Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16lib/genalloc.c: remove unmatched write_lock() in gen_pool_destroyZygo Blaxell1-1/+0
There is a call to write_lock() in gen_pool_destroy which is not balanced by any corresponding write_unlock(). This causes problems with preemption because the preemption-disable counter is incremented in the write_lock() call, but never decremented by any call to write_unlock(). This bug is gen_pool_destroy, and one of them is non-x86 arch-specific code. Signed-off-by: Zygo Blaxell <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: Steve Wise <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCKTomas Szepe1-7/+7
CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK. This makes it possible to run complete systems out of a CONFIG_BLOCK=n initramfs on current kernels again (this last worked on 2.6.27.*). Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16drivers: add support for the TI VLYNQ busFlorian Fainelli7-0/+1011
Add support for the TI VLYNQ high-speed, serial and packetized bus. This bus allows external devices to be connected to the System-on-Chip and appear in the main system memory just like any memory mapped peripheral. It is widely used in TI's networking and multimedia SoC, including the AR7 SoC. Signed-off-by: Eugene Konev <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Alan Cox <[email protected]> Cc: Greg KH <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16console: make blank timeout value a boot optionDaniel Mack2-6/+11
The console blank timer is currently hardcoded to 10*60 seconds which might be annoying on systems with no input devices attached to wake up the console again. Especially during development, disabling the screen saver can be handy - for example when debugging the root fs mount mechanism or other scenarios where no userspace program could be started to do that at runtime from userspace. This patch defines a core_param for the variable in charge which allows users to entirely disable the blank feature at boot time by setting it 0. The value can still be overwritten at runtime using the standard ioctl call - this just allows to conditionally change the default. Signed-off-by: Daniel Mack <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16Documentation/atomic_ops.txt: fix sample codeFigo.zhang1-2/+2
list_add() lost a parameter in sample code. Signed-off-by: Figo.zhang <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16eisa.ids: add Network Peripherals FDDI boardsMaciej W. Rozycki1-0/+5
Add EISA IDs for Network Peripherals FDDI boards. Descriptions taken from the respective EISA configuration files. It's unlikely we'll ever support these cards, the problem being the lack of documentation. Assuming the policy for the EISA ID database is the same as for PCI I'm sending these entries for the sake of completeness. Signed-off-by: Maciej W. Rozycki <[email protected]> Cc: Marc Zyngier <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16syscalls.h: remove duplicated declarations for sys_pipe2Masatake YAMATO1-2/+1
sys_pipe2 is declared twice in include/linux/syscalls.h. Signed-off-by: Masatake YAMATO <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16kmap_types: make most arches use generic header fileRandy Dunlap17-318/+31
Convert most arches to use asm-generic/kmap_types.h. Move the KM_FENCE_ macro additions into asm-generic/kmap_types.h, controlled by __WITH_KM_FENCE from each arch's kmap_types.h file. Would be nice to be able to add custom KM_types per arch, but I don't yet see a nice, clean way to do that. Built on x86_64, i386, mips, sparc, alpha(tonyb), powerpc(tonyb), and 68k(tonyb). Note: avr32 should be able to remove KM_PTE2 (since it's not used) and then just use the generic kmap_types.h file. Get avr32 maintainer approval. Signed-off-by: Randy Dunlap <[email protected]> Cc: <[email protected]> Acked-by: Mike Frysinger <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: Bryan Wu <[email protected]> Cc: Mikael Starvik <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: "Luck Tony" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: David Howells <[email protected]> Cc: Kyle McMartin <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Paul Mundt <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16Documentation/accounting/getdelays.c intialize the variable before using itJaswinder Singh Rajput1-1/+2
Fix compilation warning: Documentation/accounting/getdelays.c: In function `main': Documentation/accounting/getdelays.c:249: warning: `cmd_type' may be used uninitialized in this function This is in fact a false positive. Signed-off-by: Jaswinder Singh Rajput <[email protected]> Acked-by: Balbir Singh <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16hexdump: remove the trailing spaceLi Zefan1-6/+9
For example: hex_dump_to_buffer("AB", 2, 16, 1, buf, 100, 0); pr_info("[%s]\n", buf); I'd expect the output to be "[41 42]", but actually it's "[41 42 ]" This patch also makes the required buf to be minimum. To print the hex format of "AB", a buf with size 6 should be sufficient, but hex_dump_to_buffer() required at least 8. Signed-off-by: Li Zefan <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16use printk_once() in several placesMinchan Kim2-14/+6
There are some places to be able to use printk_once instead of hard coding. Signed-off-by: Minchan Kim <[email protected]> Cc: Dominik Brodowski <[email protected]> Cc: David S. Miller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: KOSAKI Motohiro <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16slow-work: use round_jiffies() for thread pool's cull and OOM timersChris Peterson1-9/+14
Round the slow work queue's cull and OOM timeouts to whole second boundary with round_jiffies(). The slow work queue uses a pair of timers to cull idle threads and, after OOM, to delay new thread creation. This patch also extracts the mod_timer() logic for the cull timer into a separate helper function. By rounding non-time-critical timers such as these to whole seconds, they will be batched up to fire at the same time rather than being spread out. This allows the CPU wake up less, which saves power. Signed-off-by: Chris Peterson <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16lib: do code optimization for radix_tree_lookup() and radix_tree_lookup_slot()Huang Shijie1-47/+26
radix_tree_lookup() and radix_tree_lookup_slot() have much the same code except for the return value. Introduce radix_tree_lookup_element() to do the real work. /* * is_slot == 1 : search for the slot. * is_slot == 0 : search for the node. */ static void * radix_tree_lookup_element(struct radix_tree_root *root, unsigned long index, int is_slot); Signed-off-by: Huang Shijie <[email protected]> Cc: Nick Piggin <[email protected]> Cc: Christoph Lameter <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16groups: move code to kernel/groups.cAlexey Dobriyan3-283/+289
Move supplementary groups implementation to kernel/groups.c . kernel/sys.c already accumulated quite a few random stuff. Do strictly copy/paste + add required headers to compile. Compile-tested on many configs and archs. Signed-off-by: Alexey Dobriyan <[email protected]> Cc: Ingo Molnar <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16remove put_cpu_no_resched()Thomas Gleixner3-5/+4
put_cpu_no_resched() is an optimization of put_cpu() which unfortunately can cause high latencies. The nfs iostats code uses put_cpu_no_resched() in a code sequence where a reschedule request caused by an interrupt between the get_cpu() and the put_cpu_no_resched() can delay the reschedule for at least HZ. The other users of put_cpu_no_resched() optimize correctly in interrupt code, but there is no real harm in using the put_cpu() function which is an alias for preempt_enable(). The extra check of the preemmpt count is not as critical as the potential source of missing a reschedule. Debugged in the preempt-rt tree and verified in mainline. Impact: remove a high latency source [[email protected]: build fix] Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Ingo Molnar <[email protected]> Cc: Tony Luck <[email protected]> Cc: Trond Myklebust <[email protected]> Cc: "J. Bruce Fields" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16drbd: add major number to major.hPhilipp Reisner1-0/+1
Since we have had a LANANA major number for years, and it is documented in devices.txt, I think that this first patch can go upstream. Signed-off-by: Philipp Reisner <[email protected]> Signed-off-by: Lars Ellenberg <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16headers: move module_bug_finalize()/module_bug_cleanup() definitions into ↵Andrew Morton2-12/+17
module.h They're in linux/bug.h at present, which causes include order tangles. In particular, linux/bug.h cannot be used by linux/atomic.h because, according to Nikanth: linux/bug.h pulls in linux/module.h => linux/spinlock.h => asm/spinlock.h (which uses atomic_inc) => asm/atomic.h. bug.h is a pretty low-level thing and module.h is a higher-level thing, IMO. Cc: Nikanth Karthikesan <[email protected]> Cc: Rusty Russell <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16poll: avoid extra wakeups in select/pollEric Dumazet2-4/+39
After introduction of keyed wakeups Davide Libenzi did on epoll, we are able to avoid spurious wakeups in poll()/select() code too. For example, typical use of poll()/select() is to wait for incoming network frames on many sockets. But TX completion for UDP/TCP frames call sock_wfree() which in turn schedules thread. When scheduled, thread does a full scan of all polled fds and can sleep again, because nothing is really available. If number of fds is large, this cause significant load. This patch makes select()/poll() aware of keyed wakeups and useless wakeups are avoided. This reduces number of context switches by about 50% on some setups, and work performed by sofirq handlers. Signed-off-by: Eric Dumazet <[email protected]> Acked-by: David S. Miller <[email protected]> Acked-by: Andi Kleen <[email protected]> Acked-by: Ingo Molnar <[email protected]> Acked-by: Davide Libenzi <[email protected]> Cc: Christoph Lameter <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16ntfs: use is_power_of_2() function for clarity.Robert P. J. Day2-2/+4
Signed-off-by: Robert P. J. Day <[email protected]> Cc: Anton Altaparmakov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-06-16kernel/kfifo.c: replace conditional test with is_power_of_2()Robert P. J. Day1-2/+2
Signed-off-by: Robert P. J. Day <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.