| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This error gets printed inside a sandbox with warnings turned on.
/mnt/host/source/src/third_party/kernel/v5.15/drivers/
gpu/drm/xe/xe_gt_idle_sysfs.c:87:26: error: format string is
not a string literal (potentially insecure) [-Werror,-Wformat-security]
return sysfs_emit(buff, gtidle->name);
^~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/
gpu/drm/xe/xe_gt_idle_sysfs.c:87:26: note: treat the string
as an argument to avoid this
return sysfs_emit(buff, gtidle->name);
^
"%s",
1 error generated.
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This workaround is primarily implemented by the BIOS. However if the
BIOS applies the workaround it will reserve a small piece of our DSM
(which should be at the top, right below the WOPCM); we just need to
keep that region reserved so that nothing else attempts to re-use it.
v2 (Gustavo):
- Check for NULL media_gt
- Mask bits [5:0] to avoid potential issues in future platforms
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231102124855.1940491-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
For mtl and above 16.67 Mhz is the scale factor to calculate
rpX frequencies.
v2: Fix review comment (Ashutosh)
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231101163212.1629685-1-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The LNCFCMOCS registers no longer exist on Xe2 so there's no need to
attempt to program them. Since GLOB_MOCS is the only set of MOCS
registers now, it's expected to be used for all platforms (both igpu and
dgpu) going forward, so adjust the MOCS programming flags accordingly.
v2:
- Fix typo (global mocs condition is >=, not >)
Bspec: 71582
Reviewed-by: Pallavi Mishra <pallavi.mishra@intel.com>
Link: https://lore.kernel.org/r/20231031140536.303746-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The access counters worker function is fixed to advance the head pointer
when dequeuing from the acc_queue. This now matches the similar logic in
get_pagefault().
Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If a rebind is skipped the tile_present mask needs to be updated for the
newly created vma to properly reflect the state of the vma.
Reported-by: <christoph.manszewski@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Print CTB info during TLB invalidation
timeout event.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently mem_type_to_tile() is being used to access the tile's underlying
tile.mem.vram. However, this function makes the assumption that a mem_type
will only ever map to a single tile. Now that the TTM vram manager contains
a pointer to the memory_region, make use of this in xe_bo.c.
As such, introduce a helper function res_to_mem_region() to get the
ttm_vram_mgr->vram from the BO's resource, and use this to replace usage
of mem_type_to_tile().
xe_tile is still needed to choose the migration context, so this part is
unchanged. But as this is only renaming usage, function is renamed now to
mem_type_to_migrate().
Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Unused and would like to remove the memtype_to_tile() which it calls.
Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Replace the xe_ttm_vram_mgr.tile pointer with a xe_mem_region pointer
instead. The former is currently unused.
TTM VRAM regions are exposing device vram and is better to store a pointer
directly to the xe_mem_region instead of the tile. This allows to cleanup
unnecessary usage of xe_tile from xe_bo.c in later patch.
Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
PACKAGE_RAPL_LIMIT register (1.x * power(2,y))
v2: Get rpm wake ref while accessing power1_max_interval
v3: %s/hwmon/xe_hwmon/
v4:
- As power1_max_interval is rw attr take lock in read function as well
- Refine comment about val to fix point conversion (Andi)
- Update kernel version and date in doc
v5: Fix review comments (Anshuman)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030115618.1382200-4-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Take hwmon_lock while accessing hwmon rw attributes. For readonly
attributes its not required to take lock as reads are protected
by sysfs layer and therefore sequential.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030115618.1382200-3-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add kernel doc and refactor some of the hwmon functions, there is
no functionality change.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030115618.1382200-2-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
With things like pipelined evictions, VRAM pages can be marked as free
and yet still have some active kernel fences, with the idea that the
next caller to allocate the memory will respect them. However it looks
like we are missing synchronisation for KMD internal buffers, like
page-tables, lrc etc. For userspace objects we should already have the
required synchronisation for CPU access via the fault handler, and
likewise for GPU access when vm_binding them.
To fix this synchronise against any kernel fences for all KMD objects at
creation. This should resolve some severe corruption seen during
evictions.
v2 (Matt B):
- Revamp the comment explaining this. Also mention why USAGE_KERNEL is
correct here.
v3 (Thomas):
- Make sure to use ctx.interruptible for the wait.
Testcase: igt@xe-evict-ccs
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/853
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/855
Reported-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There could be active fences already in the dma-resv for the object
prior to clearing. Make sure to input them as dependencies for the clear
job.
v2 (Matt B):
- We can use USAGE_KERNEL here, since it's only the move fences we
care about here. Also add a comment.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Spec says: "This is a privileged command; it will not be effective (will
be converted to a no-op) if executed from within a non-privileged batch
buffer." However here it looks like we are just emitting it inside some
bb which was jumped to via the ppGTT, which should be considered
a non-privileged address space.
It looks like we just need some way of preventing things like the
emit_pte() and later copy/clear being preempted in-between so rather
just emit directly in the ring for migration jobs.
Bspec: 45716
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add Xe_LPM+ support to an existing workaround.
BSpec: 51762
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://lore.kernel.org/r/20231030150756.1011777-1-shekhar.chauhan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add conditional check for access counter granularity.
This check will return -EINVAL if granularity is beyond 64M
which is a hardware limitation.
v2: Defined
XE_ACC_GRANULARITY_128K 0
XE_ACC_GRANULARITY_2M 1
XE_ACC_GRANULARITY_16M 2
XE_ACC_GRANULARITY_64M 3
as part of uAPI.
So, that user can also use it.(Oak)
v3: Move uAPI to proper location and give proper
documentation.(Brian, Oak)
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Janga Rahul Kumar <janga.rahul.kumar@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
FORCE_SLM_FENCE_SCOPE_TO_TILE and FORCE_UGM_FENCE_SCOPE_TO_TILE are in
the up dword of LSC_CHICKEN_BIT_0 register. Also, the 14010918519
workaround only applies to early steppings, A*. Eventually those should
be dropped, like they were in commit eaeb4b361452 ("drm/i915/dg2: Drop
pre-production GT workarounds"), so let's make sure they are annotated
appropriately.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231024220412.223868-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
MTL uses a versionless GSC-enabled binary.
v2: don't use the filename to identify the header type (Lucas)
v3: fix commit msg (Lucas)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On newer platforms the HuC survives reset and stays authenticated, so no
need to re-authenticate it.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On MTL-style multi-gt platforms, the HuC is only available on the media
GT, so we need to consider it as not supported on the render GT.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The GSC-enabled HuC binary starts with a GSC header, which is followed
by the legacy-style CSS header and the binary itself. We can parse the
GSC headers to find the HuC version and the location of the binary to
be used for the DMA transfer.
The parsing function has been designed to be re-used for the GSC binary,
so the entry names are external parameters (because the GSC uses
different ones) and the CSS entry is optional (because the GSC doesn't
have it).
v2: move new code to uc_fw.c, better comments and error checking, split
old code move to separate patch (Lucas), move headers and
documentation to uc_fw_abi.h.
v3: use 2 separate loops, rework marker check (Lucas)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
GSC binaries and newer HuC ones use GSC-style headers instead of the
CSS. In preparation for adding support for such parsing, split out the
current parsing code to its own function, to make it cleaner to add the
new paths. The existing doc section has also been renamed to narrow it
to CSS-based binaries.
v2: new patch in series, split out from next patch for easier reviewing
v3: drop unneeded include (Lucas)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In existing code flow for future platforms i.e. >1270, the rpX
(rp0,rpn and rpe) fused values are read from gen 6 registers.
Which is not correct. Unless specified gen 1270 regs should be valid
for gen 1270+ platforms as well.
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The MOCS registers should be written in an MCR-specific manner on Xe_HP
and beyond to prevent any other driver threads or external firmware from
putting the hardware into unicast mode while we initialize the MOCS
table.
Bspec: 66534, 67609, 71185
Cc: Ruthuvikas Ravikumar <ruthuvikas.ravikumar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231023204112.2856331-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As with DG2/MTL, Xe2 also fails to emit instruction headers for SVG
state instructions if no explicit state has been set. The SVG part of
the LRC is nearly identical to DG2/MTL; the only change is that
3DSTATE_DRAWING_RECTANGLE has been replaced by
3DSTATE_DRAWING_RECTANGLE_FAST, so we can just re-use the same state
table and handle that single instruction when we encounter it.
Bspec: 65182
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20231025151732.3461842-8-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When recording the default LRC, the expectation is that the hardware's
original state settings (both register and instruction) will be written
out to the LRC upon first context switch. For many 3DSTATE_* state
instructions that don't truly have "default" values, this translates to
a simple instruction header (opcodes + dword length) being written to
the LRC, followed by an appropriate number of blank dwords as a place
holder. When userspace creates a context (which starts as a copy of the
default LRC), they'll generally emit real 3DSTATE_* as part of their
initialization to select the settings they desire. If they don't emit
one of the 3DSTATE instructions, then the zeroed dwords that remain in
their LRC image generally translate to various state remaining disabled.
This will either be what userspace wants or will lead to very
reproducible and easily-debugged problems (rendering glitches, engine
hangs).
It turns out that a subset of the 3DSTATE instructions, specifically
those belonging to the SVG (State Variable - Global) unit, are not only
emitting 0's for the instruction's "body" dwords, but also for the
instruction header dword if no specific state has been explicitly set
before context switch. This means that when the hardware switches to a
context that hasn't explicitly provided an appropriate state setting,
the hardware will just see a sequence of NOOPs in the spot reserved for
that 3DSTATE instruction while executing the LRC, and the actual
hardware state setting will unintentionally inherit the configuration
used by the previously running context. Now when userspace makes a
mistake and forgets to emit an important state instruction they no
longer get consistent, easily-reproducible corruption/hangs, but rather
erratic behavior where the presence/absence of a problem depends on what
other workloads are running on the system and what order the contexts
are scheduled on the engine.
A specific example of this that came up recently related to mesh shading
The OpenGL driver was not specifically emitting a 3DSTATE_MESH_CONTROL
to disable mesh shading at context init, so on context switch, mesh
shading would either be on or off depending on what the previous context
had been doing. Vulkan apps _were_ enabling mesh shading, so running a
Vulkan app and then context switching to an OpenGL app resulted in mesh
shading still unexpectedly being enabled during OpenGL operation, and
since other Mesh-related state was not properly initialized for that
context a GPU hang was seen. Due to the specific ordering requirements
(Vulkan app runs first, followed by OpenGL app), it took additional
debug effort to track down the cause of the problem.
There are various workarounds related to this behavior, with current
implementations handled in the userspace drivers. E.g., Wa_14019789679
and Wa_22018402687. However it's been suggested that the kernel driver
can help simplify things here by emitting zeroed SVG state with proper
instruction headers as part of our default context creation (i.e., at
the same point we apply LRC workarounds). This will help ensure that
any future cases where a userspace driver does not emit an important
state setting will result in consistent behavior.
Bspec: 46261
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20231025151732.3461842-7-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On some platforms we need to emit some non-register state while
recording an engine class' default LRC. Add the infrastructure to
support this; actual per-platform tables will be added in future
patches.
v2:
- Checkpatch whitespace fix
- Add extra assertion to ensure num_dw != 0. (Bala)
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20231025151732.3461842-6-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Make use of EVENT_CLASS to group similar trace events
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Link: https://lore.kernel.org/intel-xe/20231019093140.1901665-3-balasubramani.vivekanandan@intel.com/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Event tracing enabled for CTB submissions.
Additional minor refactor - Removed a unnecessary ct_to_xe() call.
v2: Remove a unwanted comment (Hari)
Add missing change to commit message
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Link: https://lore.kernel.org/intel-xe/20231019093140.1901665-2-balasubramani.vivekanandan@intel.com/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add L3SQCREG5 as part of HW recommended settings. The recommended value
in Bspec is 00e0007f. For Xe2-LPG, bits 23:21 don't exist anymore, but
it's confirmed with HW engineers that setting them doesn't do anything.
They still exist on the media GT, Xe2-LPM, but they are already they are
already set as per HW default value. So for Xe2 platform, the only bits
that need to be set are 9:0 since HW's default is 0x1ff and the
recommended value is 0x7f.
Unlike most registers, which have the same relative offset on both
the primary and media GT, this register has a different base offset
on the media GT.
On MTL the register only exists for the primary (graphics) GT, so
there's no need to program it on the media gt. Also, it's part of the
RCS engine's context, so it needs to be added as a LRC workaround.
Bspec: 72161
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231024220739.224251-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add the initial collection of gt/engine/lrc workarounds.
While at it, add some newlines around the platform/IP comments to make
them consistent across all workarounds.
v2:
- FF_MODE is an MCR register (Matt Roper)
- Group 18032247524 with other Xe2 workarounds (Matt Roper)
- Move WA changing PSS_CHICKEN to lrc_was[] as for Xe2 that register
is part of the render context image (Matt Roper)
- Apply WA 16020518922 only on render engine (Matt Roper)
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231024220739.224251-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We can remove the unnecessary indirection thru xe->tiles[] to get
the TTM VRAM manager. This code can be common for VRAM and STOLEN.
Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Bit 7 in the leaf node is normally programmed with pat[2], however with
2M/1G pages that same bit in the PDE/PDPE also toggles 2M/1G pages. For
2M/1G entries the pat[2] is rather moved to bit 12, which is now free
given that the address must be aligned to 2M or 1G, leaving bit 7 for
toggling 2M/1G pages.
Bspec: 59510, 45038
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The PVC GuC version that we're currently using (70.6.4) has a known
issue that leads to dropping the disabling of contexts that have
pending page faults. This is fixed in newer blobs, so we need to
update to a more recent release.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/696
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is used for the priority of an exec queue (not an engine) and
should be named accordingly.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
During the uapi review it was identified a possible confusion
with the plural of acronym with a new acronym. So the
recommendation is to go with gt_list instead.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
We already have many bits reserved at the end already.
Let's kill the unused ones.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Let's have a single GT ID per GT within the PCI Device Card.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Split drm_xe_query_gt out of the gt list one in order to better
document it.
No functional change at this point. Any actual change to the
uapi should come in follow-up additions.
v2: s/maks/mask
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
A case existed where an out-sync of a later VM bind operation could
signal before a previous one if the later operation results in a NOP
(e.g. a unbind or prefetch to a VA range without any mappings). This
breaks the ordering rules, fix this. This patch also lays the groundwork
for users to pass in num_binds == 0 and out-syncs.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Async worker is gone. All jobs and memory allocations done in IOCTL to
align with dma fencing rules.
Async vs. sync now means when do bind operations complete relative to
the IOCTL. Async completes when out-syncs signal while sync completes
when the IOCTL returns. In-syncs and out-syncs are only allowed in async
mode.
If memory allocations fail in the job creation step the VM is killed.
This is temporary, eventually a proper unwind will be done and VM will
be usable.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is not used nor does it align VM async document, kill this.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This extension is currently not used and it is not aligned with
the error handling on async VM_BIND. Let's remove it and along with
that, since it was the only extension for the vm_create, remove VM
extension entirely.
v2: rebase on top of the removal of drm_xe_ext_exec_queue_set_property
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
There really is no difference between 'struct drm_xe_ext_vm_set_property'
and 'struct drm_xe_ext_exec_queue_set_property', they are extensions which
specify a <property, value> pair. Replace the two extensions with a single
common 'struct drm_xe_ext_set_property' extension. The rationale is that
rather than have each XE module (including future modules) invent their own
property/value extensions, all XE modules use a common set_property
extension when possible.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
|
|
Functionality of XE_EXEC_QUEUE_SET_PROPERTY_COMPUTE_MODE deprecated in a
previous patch, drop from uAPI. The property is just simply inherented
from the VM.
v2:
- Update commit message (Niranjana)
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Much better name and aligns with xe_vm_add_compute_exec_queue. As part
of the rename, move the implementation from xe_exec_queue.c to xe_vm.c.
Suggested-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We are going to remove XE_EXEC_QUEUE_SET_PROPERTY_COMPUTE_MODE from the
uAPI, deprecate the implementation first by making
XE_EXEC_QUEUE_SET_PROPERTY_COMPUTE_MODE a NOP. After removal of
XE_EXEC_QUEUE_SET_PROPERTY_COMPUTE_MODE the proper is simply inherented
from the VM.
v2:
- Update commit message with explaination of removal (Niranjana)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Last little piece to support parallel exec queue is compute mode.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|