aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-08-08block: get rid of unused plug->nowait flagJens Axboe2-7/+0
This was introduced to add a plug based way of signaling nowait issues, but we have since moved on from that. Kill the old dead code, nobody is setting it anymore. Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2023-08-08MAINTAINERS: update Claudiu Beznea's email addressClaudiu Beznea1-11/+11
Update MAINTAINERS entries with a valid email address as the Microchip one is no longer valid. Acked-by: Conor Dooley <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: Claudiu Beznea <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-08PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root busIgor Mammedov1-1/+7
40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources() which depends on bridge being available, however enable_slot() can be called without bridge associated: 1. Legitimate case of hotplug on root bus (widely used in virt world) 2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at enable_slot(..., bridge = 0) where bus has no bridge assigned to it. acpihp doesn't know that it's a bridge, and bus specific 'PCI subsystem' can't augment ACPI context with bridge information since the PCI device to get this data from is/was not available. Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI hotplug on hostbridge slots. To reproduce, boot kernel at commit 40613da52b13 in VM started with following CLI (assuming guest root fs is installed on sda1 partition): # qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \ -monitor stdio -serial file:serial.log \ -kernel arch/x86/boot/bzImage \ -append "root=/dev/sda1 console=ttyS0" \ guest_disk.img Once guest OS is fully booted at qemu prompt: (qemu) device_add e1000 (check serial.log) it will cause NULL pointer dereference at: void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) { struct pci_bus *parent = bridge->subordinate; BUG: kernel NULL pointer dereference, address: 0000000000000018 ? pci_assign_unassigned_bridge_resources+0x1f/0x260 enable_slot+0x21f/0x3e0 acpiphp_hotplug_notify+0x13d/0x260 acpi_device_hotplug+0xbc/0x540 acpi_hotplug_work_fn+0x15/0x20 process_one_work+0x1f7/0x370 worker_thread+0x45/0x3b0 The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following sequence: 1. Suspend to RAM 2. Wake up with the same backtrace being observed: 3. 2nd suspend to RAM attempt makes laptop freeze Fix it by using __pci_bus_assign_resources() instead of pci_assign_unassigned_bridge_resources() as we used to do, but only in case when bus doesn't have a bridge associated (to cover for the case of ACPI event on hostbridge or non existing root port). That lets us keep hotplug on root bus working like it used to and at the same time keeps resource reassignment usable on root ports (and other 1st level bridges) that was fixed by 40613da52b13. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Link: https://lore.kernel.org/r/[email protected] Reported-by: Woody Suwalski <[email protected]> Tested-by: Woody Suwalski <[email protected]> Tested-by: Michal Koutný <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Igor Mammedov <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]>
2023-08-08io_uring/parisc: Adjust pgoff in io_uring mmap() for pariscHelge Deller2-10/+8
The changes from commit 32832a407a71 ("io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()") to the parisc implementation of get_unmapped_area() broke glibc's locale-gen executable when running on parisc. This patch reverts those architecture-specific changes, and instead adjusts in io_uring_mmu_get_unmapped_area() the pgoff offset which is then given to parisc's get_unmapped_area() function. This is much cleaner than the previous approach, and we still will get a coherent addresss. This patch has no effect on other architectures (SHM_COLOUR is only defined on parisc), and the liburing testcase stil passes on parisc. Cc: [email protected] # 6.4 Signed-off-by: Helge Deller <[email protected]> Reported-by: Christoph Biedl <[email protected]> Fixes: 32832a407a71 ("io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()") Fixes: d808459b2e31 ("io_uring: Adjust mapping wrt architecture aliasing requirements") Link: https://lore.kernel.org/r/ZNEyGV0jyI8kOOfz@p100 Signed-off-by: Jens Axboe <[email protected]>
2023-08-08MAINTAINERS: Remove maintainer of HiSilicon RoCEJunxian Huang1-1/+0
Haoyue no longer maintains the Hisilicon RoCE driver. So remove him from MAINTAINERS. Signed-off-by: Junxian Huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]>
2023-08-08perf stat: Don't display zero tool countsIan Rogers1-0/+5
Andi reported (see link below) a regression when printing the 'duration_time' tool event, where it gets printed as "not counted" for most of the CPUs, fix it by skipping zero counts for tool events. Reported-by: Andi Kleen <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Andi Kleen <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Claire Jensen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/all/ZMlrzcVrVi1lTDmn@tassilo/ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-08Merge tag 'gfs2-v6.4-fixes' of ↵Linus Torvalds2-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: - Fix a freeze consistency check in gfs2_trans_add_meta() - Don't use filemap_splice_read as it can cause deadlocks on gfs2 * tag 'gfs2-v6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Don't use filemap_splice_read gfs2: Fix freeze consistency check in gfs2_trans_add_meta
2023-08-08accel/ivpu: Add set_pages_array_wc/uc for internal buffersKarol Wachowski1-0/+8
Buffers mapped with pgprot_writecombined() are not correctly flushed. This triggers issues on VPU access using random memory content such as MMU translation faults, invalid context descriptors being fetched and can lead to VPU FW crashes. Fixes: 647371a6609d ("accel/ivpu: Add GEM buffer object management") Cc: [email protected] # 6.3+ Signed-off-by: Karol Wachowski <[email protected]> Reviewed-by: Stanislaw Gruszka <[email protected]> Signed-off-by: Stanislaw Gruszka <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-08cpuidle: psci: Move enabling OSI mode after power domains creationMaulik Shah1-26/+13
A switch from OSI to PC mode is only possible if all CPUs other than the calling one are OFF, either through a call to CPU_OFF or not yet booted. Currently OSI mode is enabled before power domains are created. In cases where CPUidle states are not using hierarchical CPU topology the bail out path tries to switch back to PC mode which gets denied by firmware since other CPUs are online at this point and creates inconsistent state as firmware is in OSI mode and Linux in PC mode. This change moves enabling OSI mode after power domains are created, this would makes sure that hierarchical CPU topology is used before switching firmware to OSI mode. Cc: [email protected] Fixes: 70c179b49870 ("cpuidle: psci: Allow PM domain to be initialized even if no OSI mode") Signed-off-by: Maulik Shah <[email protected]> Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2023-08-08cpuidle: dt_idle_genpd: Add helper function to remove genpd topologyMaulik Shah2-0/+31
Genpd parent and child domain topology created using dt_idle_pd_init_topology() needs to be removed during error cases. Add new helper function dt_idle_pd_remove_topology() for same. Cc: [email protected] Reviewed-by: Ulf Hanssson <[email protected]> Signed-off-by: Maulik Shah <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2023-08-08tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick up the changes from these csets: 522b1d69219d8f08 ("x86/cpu/amd: Add a Zenbleed fix") That cause no changes to tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after $ Just silences this perf build warning: Warning: Kernel ABI header differences: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov (AMD) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-08Revert "perf report: Append inlines to non-DWARF callchains"Arnaldo Carvalho de Melo1-5/+0
This reverts commit 46d21ec067490ab9cdcc89b9de5aae28786a8b8e. The tests were made with a specific workload, further tests on a recently updated fedora 38 system with a system wide perf.data file shows 'perf report' taking excessive time resolving inlines in vmlinux, so lets revert this until a full investigation and improvement on the addr2line support code is made. Reported-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Artem Savkov <[email protected]> Tested-by: Jesper Dangaard Brouer <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Milian Wolff <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-08wifi: cfg80211: fix sband iftype data lookup for AP_VLANFelix Fietkau1-0/+3
AP_VLAN interfaces are virtual, so doesn't really exist as a type for capabilities. When passed in as a type, AP is the one that's really intended. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-08-08wifi: rtw89: fix 8852AE disconnection caused by RX full flagsPing-Ke Shih1-1/+1
RX full flags are raised if certain types of RX FIFO are full, and then drop all following MPDU of AMPDU. In order to resume to receive MPDU when RX FIFO becomes available, we clear the register bits by the commit a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC"). But, 8852AE needs more settings to support this. To quickly fix disconnection problem, revert the behavior as before. Fixes: a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC") Reported-by: Damian B <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217710 Cc: <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Tested-by: Damian B <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-08-08MAINTAINERS: Remove tree entry for rtl8180Larry Finger1-1/+0
This entry is not needed. Remove it. Signed-off-by: Larry Finger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-08-08MAINTAINERS: Update entry for rtl8187Larry Finger1-3/+1
As Herton Ronaldo Krzesinski is no longer active, remove him as maintainer for rtl8187. The git tree entry is also removed. Signed-off-by: Larry Finger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-08-08wifi: brcm80211: handle params_v1 allocation failurePetr Tesarik1-0/+5
Return -ENOMEM from brcmf_run_escan() if kzalloc() fails for v1 params. Fixes: 398ce273d6b1 ("wifi: brcmfmac: cfg80211: Add support for scan params v2") Signed-off-by: Petr Tesarik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-08-08drm/nouveau/disp: Revert a NULL check inside nouveau_connector_get_modesKarol Herbst1-1/+1
The original commit adding that check tried to protect the kenrel against a potential invalid NULL pointer access. However we call nouveau_connector_detect_depth once without a native_mode set on purpose for non LVDS connectors and this broke DP support in a few cases. Cc: Olaf Skibbe <[email protected]> Cc: Lyude Paul <[email protected]> Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/238 Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/245 Fixes: 20a2ce87fbaf8 ("drm/nouveau/dp: check for NULL nv_connector->native_mode") Signed-off-by: Karol Herbst <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-07net: marvell: prestera: fix handling IPv4 routes with nhidJonas Gorski1-7/+7
Fix handling IPv4 routes referencing a nexthop via its id by replacing calls to fib_info_nh() with fib_info_nhc(). Trying to add an IPv4 route referencing a nextop via nhid: $ ip link set up swp5 $ ip a a 10.0.0.1/24 dev swp5 $ ip nexthop add dev swp5 id 20 via 10.0.0.2 $ ip route add 10.0.1.0/24 nhid 20 triggers warnings when trying to handle the route: [ 528.805763] ------------[ cut here ]------------ [ 528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci] [ 528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G O 6.4.5 #1 [ 528.845178] Hardware name: delta,tn48m-dn (DT) [ 528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera] [ 528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera] [ 528.876007] sp : ffff80000b20bc90 [ 528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48 [ 528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800 [ 528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200 [ 528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059 [ 528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000 [ 528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000 [ 528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020 [ 528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86 [ 528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc [ 528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80 [ 528.951058] Call trace: [ 528.953516] __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.958952] __prestera_router_fib_event_work+0x100/0x158 [prestera] [ 528.965348] process_one_work+0x208/0x488 [ 528.969387] worker_thread+0x4c/0x430 [ 528.973068] kthread+0x120/0x138 [ 528.976313] ret_from_fork+0x10/0x20 [ 528.979909] ---[ end trace 0000000000000000 ]--- [ 528.984998] ------------[ cut here ]------------ [ 528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci] [ 529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G W O 6.4.5 #1 [ 529.024368] Hardware name: delta,tn48m-dn (DT) [ 529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera] [ 529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera] [ 529.055452] sp : ffff80000b20bc60 [ 529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48 [ 529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800 [ 529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0 [ 529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059 [ 529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000 [ 529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000 [ 529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80 [ 529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 0000000000000018 [ 529.116157] x5 : 00000000d3497eb6 x4 : ffff000105604081 x3 : 000000008e979557 [ 529.123329] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80 [ 529.130501] Call trace: [ 529.132958] __prestera_fi_is_direct+0x2c/0x68 [prestera] [ 529.138394] prestera_k_arb_fib_evt+0x6b8/0xd50 [prestera] [ 529.143918] __prestera_router_fib_event_work+0x100/0x158 [prestera] [ 529.150313] process_one_work+0x208/0x488 [ 529.154348] worker_thread+0x4c/0x430 [ 529.158030] kthread+0x120/0x138 [ 529.161274] ret_from_fork+0x10/0x20 [ 529.164867] ---[ end trace 0000000000000000 ]--- and results in a non offloaded route: $ ip route 10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap 10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 rt_trap When creating a route referencing a nexthop via its ID, the nexthop will be stored in a separate nh pointer instead of the array of nexthops in the fib_info struct. This causes issues since fib_info_nh() only handles the nexthops array, but not the separate nh pointer, and will loudly WARN about it. In contrast fib_info_nhc() handles both, but returns a fib_nh_common pointer instead of a fib_nh pointer. Luckily we only ever access fields from the fib_nh_common parts, so we can just replace all instances of fib_info_nh() with fib_info_nhc() and access the fields via their fib_nh_common names. This allows handling IPv4 routes with an external nexthop, and they now get offloaded as expected: $ ip route 10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap 10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 offload rt_offload Fixes: 396b80cb5cc8 ("net: marvell: prestera: Add neighbour cache accounting") Signed-off-by: Jonas Gorski <[email protected]> Acked-by: Elad Nachman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-07net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail()Andrew Kanner1-6/+0
Syzkaller reported the following issue: ======================================= Too BIG xdp->frame_sz = 131072 WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline] WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103 ... Call Trace: <TASK> bpf_prog_4add87e5301a4105+0x1a/0x1c __bpf_prog_run include/linux/filter.h:600 [inline] bpf_prog_run_xdp include/linux/filter.h:775 [inline] bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721 netif_receive_generic_xdp net/core/dev.c:4807 [inline] do_xdp_generic+0x35c/0x770 net/core/dev.c:4866 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x650/0xe40 fs/read_write.c:584 ksys_write+0x12f/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87 ("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper Dangaard Brouer <[email protected]> noted that after introducing the xdp_init_buff() which all XDP driver use - it's safe to remove this check. The original intend was to catch cases where XDP drivers have not been updated to use xdp.frame_sz, but that is not longer a concern (since xdp_init_buff). Running the initial syzkaller repro it was discovered that the contiguous physical memory allocation is used for both xdp paths in tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also stated by Jesper Dangaard Brouer <[email protected]> that XDP can work on higher order pages, as long as this is contiguous physical memory (e.g. a page). Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T/ Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a Link: https://lore.kernel.org/all/[email protected]/T/ Fixes: 43b5169d8355 ("net, xdp: Introduce xdp_init_buff utility routine") Signed-off-by: Andrew Kanner <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Jason Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-07drivers: net: prevent tun_build_skb() to exceed the packet size limitAndrew Kanner1-1/+1
Using the syzkaller repro with reduced packet size it was discovered that XDP_PACKET_HEADROOM is not checked in tun_can_build_skb(), although pad may be incremented in tun_build_skb(). This may end up with exceeding the PAGE_SIZE limit in tun_build_skb(). Jason Wang <[email protected]> proposed to count XDP_PACKET_HEADROOM always (e.g. without rcu_access_pointer(tun->xdp_prog)) in tun_can_build_skb() since there's a window during which XDP program might be attached between tun_can_build_skb() and tun_build_skb(). Fixes: 7df13219d757 ("tun: reserve extra headroom only when XDP is set") Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a Signed-off-by: Andrew Kanner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-07Merge tag 'xsa432-6.5-tag' of ↵Linus Torvalds1-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen netback buffer overflow fix from Juergen Gross: "The fix for XSA-423 added logic to Linux'es netback driver to deal with a frontend splitting a packet in a way such that not all of the headers would come in one piece. Unfortunately the logic introduced there didn't account for the extreme case of the entire packet being split into as many pieces as permitted by the protocol, yet still being smaller than the area that's specially dealt with to keep all (possible) headers together. Such an unusual packet would therefore trigger a buffer overrun in the driver" * tag 'xsa432-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/netback: Fix buffer overrun triggered by unusual packet
2023-08-07Merge tag 'gds-for-linus-2023-08-01' of ↵Linus Torvalds12-29/+380
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/gds fixes from Dave Hansen: "Mitigate Gather Data Sampling issue: - Add Base GDS mitigation - Support GDS_NO under KVM - Fix a documentation typo" * tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Fix backwards on/off logic about YMM support KVM: Add GDS_NO support to KVM x86/speculation: Add Kconfig option for GDS x86/speculation: Add force option to GDS mitigation x86/speculation: Add Gather Data Sampling mitigation
2023-08-07Merge tag 'x86_bugs_srso' of ↵Linus Torvalds20-16/+521
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/srso fixes from Borislav Petkov: "Add a mitigation for the speculative RAS (Return Address Stack) overflow vulnerability on AMD processors. In short, this is yet another issue where userspace poisons a microarchitectural structure which can then be used to leak privileged information through a side channel" * tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/srso: Tie SBPB bit setting to microcode patch detection x86/srso: Add a forgotten NOENDBR annotation x86/srso: Fix return thunks in generated code x86/srso: Add IBPB on VMEXIT x86/srso: Add IBPB x86/srso: Add SRSO_NO support x86/srso: Add IBPB_BRTYPE support x86/srso: Add a Speculative RAS Overflow mitigation x86/bugs: Increase the x86 bugs vector size to two u32s
2023-08-07Merge tag 'wq-for-6.5-rc5-fixes' of ↵Linus Torvalds2-2/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: - The recently added cpu_intensive auto detection and warning mechanism was spuriously triggered on slow CPUs. While not causing serious issues, it's still a nuisance and can cause unintended concurrency management behaviors. Relax the threshold on machines with lower BogoMIPS. While BogoMIPS is not an accurate measure of performance by most measures, we don't have to be accurate and it has rough but strong enough correlation. - A correction in Kconfig help text * tag 'wq-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Scale up wq_cpu_intensive_thresh_us if BogoMIPS is below 4000 workqueue: Fix cpu_intensive_thresh_us name in help text
2023-08-07Merge tag 'tpmdd-v6.5-rc6' of ↵Linus Torvalds5-67/+50
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fixes from Jarkko Sakkinen: "A few more bug fixes" * tag 'tpmdd-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm/tpm_tis: Disable interrupts for Lenovo P620 devices tpm: Disable RNG for all AMD fTPMs sysctl: set variable key_sysctls storage-class-specifier to static tpm/tpm_tis: Disable interrupts for TUXEDO InfinityBook S 15/17 Gen7
2023-08-07Merge branch 'wireguard-fixes-for-6-5-rc6'Jakub Kicinski2-10/+14
Jason A. Donenfeld says: ==================== wireguard fixes for 6.5-rc6 Just one patch this time, somewhat late in the cycle: 1) Fix an off-by-one calculation for the maximum node depth size in the allowedips trie data structure, and also adjust the self-tests to hit this case so it doesn't regress again in the future. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-07wireguard: allowedips: expand maximum node depthJason A. Donenfeld2-10/+14
In the allowedips self-test, nodes are inserted into the tree, but it generated an even amount of nodes, but for checking maximum node depth, there is of course the root node, which makes the total number necessarily odd. With two few nodes added, it never triggered the maximum depth check like it should have. So, add 129 nodes instead of 128 nodes, and do so with a more straightforward scheme, starting with all the bits set, and shifting over one each time. Then increase the maximum depth to 129, and choose a better name for that variable to make it clear that it represents depth as opposed to bits. Cc: [email protected] Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-07bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slavesZiyang Xuan1-1/+3
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with following testcase: # ip netns add ns1 # ip netns exec ns1 ip link add bond0 type bond mode 0 # ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2 # ip netns exec ns1 ip link set bond_slave_1 master bond0 # ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link set bond_slave_1 nomaster # ip netns del ns1 The logical analysis of the problem is as follows: 1. create ETH_P_8021AD protocol vlan10 for bond_slave_1: register_vlan_dev() vlan_vid_add() vlan_info_alloc() __vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1 2. create ETH_P_8021AD protocol bond0_vlan10 for bond0: register_vlan_dev() vlan_vid_add() __vlan_vid_add() vlan_add_rx_filter_info() if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER return 0; if (netif_device_present(dev)) return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called // The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid. 3. detach bond_slave_1 from bond0: __bond_release_one() vlan_vids_del_by_dev() list_for_each_entry(vid_info, &vlan_info->vid_list, list) vlan_vid_del(dev, vid_info->proto, vid_info->vid); // bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted. // bond_slave_1->vlan_info will be assigned NULL. 4. delete vlan10 during delete ns1: default_device_exit_batch() dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10 vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1 BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!! Add S-VLAN tag related features support to bond driver. So the bond driver will always propagate the VLAN info to its slaves. Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support") Suggested-by: Ido Schimmel <[email protected]> Signed-off-by: Ziyang Xuan <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-07net/mlx5e: Add capability check for vnic countersLama Kayal1-49/+67
Add missing capability check for each of the vnic counters exposed by devlink health reporter, and thus avoid unexpected behavior due to invalid access to registers. While at it, read only the exact number of bits for each counter whether it was 32 bits or 64 bits. Fixes: b0bc615df488 ("net/mlx5: Add vnic devlink health reporter to PFs/VFs") Fixes: a33682e4e78e ("net/mlx5e: Expose catastrophic steering error counters") Signed-off-by: Lama Kayal <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Maher Sanalla <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Reload auxiliary devices in pci error handlersMoshe Shemesh1-1/+1
Handling pci errors should fully teardown and load back auxiliary devices, same as done through mlx5 health recovery flow. Fixes: 72ed5d5624af ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend") Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Skip clock update work when device is in error stateMoshe Shemesh1-0/+5
When device is in error state, marked by the flag MLX5_DEVICE_STATE_INTERNAL_ERROR, the HW and PCI may not be accessible and so clock update work should be skipped. Furthermore, such access through PCI in error state, after calling mlx5_pci_disable_device() can result in failing to recover from pci errors. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Reported-and-tested-by: Ganesh G R <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected] Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Aya Levin <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: LAG, Check correct bucket when modifying LAGShay Drory1-1/+1
Cited patch introduced buckets in hash mode, but missed to update the ports/bucket check when modifying LAG. Fix the check. Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5e: Unoffload post act rule when handling FIB eventsChris Mi1-2/+4
If having the following tc rule on stack device: filter parent ffff: protocol ip pref 3 flower chain 1 filter parent ffff: protocol ip pref 3 flower chain 1 handle 0x1 dst_mac 24:25:d0:e1:00:00 src_mac 02:25:d0:25:01:02 eth_type ipv4 ct_state +trk+new in_hw in_hw_count 1 action order 1: ct commit zone 0 pipe index 2 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec Action statistics: Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 2: tunnel_key set src_ip 192.168.1.25 dst_ip 192.168.1.26 key_id 4 dst_port 4789 csum pipe index 3 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec Action statistics: Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 3: mirred (Egress Redirect to device vxlan1) stolen index 9 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec Action statistics: Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed When handling FIB events, the rule in post act will not be deleted. And because the post act rule has packet reformat and modify header actions, also will hit the following syndromes: mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444), err(-22) mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_PACKET_REFORMAT_CONTEXT(0x93e) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x179e84), err(-22) Fix it by unoffloading post act rule when handling FIB events. Fixes: 314e1105831b ("net/mlx5e: Add post act offload/unoffload API") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Fix devlink controller number for ECVFDaniel Jurgens1-1/+1
The controller number for ECVFs is always 0, because the ECPF must be the eswitch owner for EC VFs to be enabled. Fixes: dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") Signed-off-by: Daniel Jurgens <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Allow 0 for total host VFsDaniel Jurgens1-2/+1
When querying eswitch functions 0 is a valid number of host VFs. After introducing ARM SRIOV falling through to getting the max value from PCI results in using the total VFs allowed on the ARM for the host. Fixes: 86eec50beaf3 ("net/mlx5: Support querying max VFs from device"); Signed-off-by: Daniel Jurgens <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Return correct EC_VF function IDDaniel Jurgens1-1/+1
The ECVF function ID range is 1..max_ec_vfs. Currently mlx5_vport_to_func_id returns 0..max_ec_vfs - 1. Which results in a syndrome when querying the caps with more recent firmware, or reading incorrect caps with older firmware that supports EC VFs. Fixes: 9ac0b128248e ("net/mlx5: Update vport caps query/set for EC VFs") Signed-off-by: Daniel Jurgens <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: DR, Fix wrong allocation of modify hdr patternYevgeny Kliteynik1-1/+1
Fixing wrong calculation of the modify hdr pattern size, where the previously calculated number would not be enough to accommodate the required number of actions. Fixes: da5d0027d666 ("net/mlx5: DR, Add cache for modify header pattern") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Erez Shitrit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5e: TC, Fix internal port memory leakJianbo Liu1-8/+13
The flow rule can be splited, and the extra post_act rules are added to post_act table. It's possible to trigger memleak when the rule forwards packets from internal port and over tunnel, in the case that, for example, CT 'new' state offload is allowed. As int_port object is assigned to the flow attribute of post_act rule, and its refcnt is incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is not called, the refcnt is never decremented, then int_port is never freed. The kmemleak reports the following error: unreferenced object 0xffff888128204b80 (size 64): comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s) hex dump (first 32 bytes): 01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00 ................ 98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff .wgA.....wgA.... backtrace: [<00000000e992680d>] kmalloc_trace+0x27/0x120 [<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core] [<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core] [<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core] [<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core] [<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core] [<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core] [<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410 [<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower] [<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower] [<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010 [<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0 [<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360 [<0000000082dd6c8b>] netlink_unicast+0x438/0x710 [<00000000fc568f70>] netlink_sendmsg+0x794/0xc50 [<0000000016e92590>] sock_sendmsg+0xc5/0x190 So fix this by moving int_port cleanup code to the flow attribute free helper, which is used by all the attribute free cases. Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()Gal Pressman1-0/+11
Hold RTNL lock when calling xdp_set_features() with a registered netdev, as the call triggers the netdev notifiers. This could happen when switching from uplink rep to nic profile for example. This resolves the following call trace: RTNL: assertion failed at net/core/dev.c (1953) WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80 Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs] CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80 Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec RSP: 0018:ffff8882a21c3948 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027 RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0 RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003 R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968 R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0 FS: 00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x79/0x120 ? call_netdevice_notifiers_info+0x7c/0x80 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? call_netdevice_notifiers_info+0x7c/0x80 ? call_netdevice_notifiers_info+0x7c/0x80 call_netdevice_notifiers+0x2e/0x50 mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core] mlx5e_nic_init+0xf1/0x1a0 [mlx5_core] mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core] mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core] mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core] __esw_offloads_unload_rep+0x52/0x60 [mlx5_core] mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core] esw_offloads_unload_rep+0x34/0x70 [mlx5_core] esw_offloads_disable+0x2b/0x90 [mlx5_core] mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core] mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core] ? devlink_get_from_attrs_lock+0x9e/0x110 devlink_nl_cmd_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit.isra.0+0xc2/0x110 genl_rcv_msg+0x17d/0x2b0 ? devlink_get_from_attrs_lock+0x110/0x110 ? devlink_nl_cmd_eswitch_get_doit+0x290/0x290 ? devlink_pernet_pre_exit+0xf0/0xf0 ? genl_family_rcv_msg_doit.isra.0+0x110/0x110 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1f6/0x2c0 netlink_sendmsg+0x232/0x4a0 sock_sendmsg+0x38/0x60 ? _copy_from_user+0x2a/0x60 __sys_sendto+0x110/0x160 ? __count_memcg_events+0x48/0x90 ? handle_mm_fault+0x161/0x260 ? do_user_addr_fault+0x278/0x6e0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fe141b1340a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007fff61d03de8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000afab00 RCX: 00007fe141b1340a RDX: 0000000000000038 RSI: 0000000000afab00 RDI: 0000000000000003 RBP: 0000000000afa910 R08: 00007fe141d80200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 </TASK> Fixes: 4d5ab0ad964d ("net/mlx5e: take into account device reconfiguration for xdp_features flag") Signed-off-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07io_uring: correct check for O_TMPFILEAleksa Sarai1-2/+4
O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old check for whether RESOLVE_CACHED can be used would incorrectly think that O_DIRECTORY could not be used with RESOLVE_CACHED. Cc: [email protected] # v5.12+ Fixes: 3a81fd02045c ("io_uring: enable LOOKUP_CACHED path resolution for filename lookups") Signed-off-by: Aleksa Sarai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-08-07tpm/tpm_tis: Disable interrupts for Lenovo P620 devicesJonathan McDowell1-0/+8
The Lenovo ThinkStation P620 suffers from an irq storm issue like various other Lenovo machines, so add an entry for it to tpm_tis_dmi_table and force polling. It is worth noting that 481c2d14627d (tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs) does not seem to fix the problem on this machine, but setting 'tpm_tis.interrupts=0' on the kernel command line does. [[email protected]: truncated the commit ID in the description to 12 characters] Cc: [email protected] # v6.4+ Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") Signed-off-by: Jonathan McDowell <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-08-07tpm: Disable RNG for all AMD fTPMsMario Limonciello3-66/+33
The TPM RNG functionality is not necessary for entropy when the CPU already supports the RDRAND instruction. The TPM RNG functionality was previously disabled on a subset of AMD fTPM series, but reports continue to show problems on some systems causing stutter root caused to TPM RNG functionality. Expand disabling TPM RNG use for all AMD fTPMs whether they have versions that claim to have fixed or not. To accomplish this, move the detection into part of the TPM CRB registration and add a flag indicating that the TPM should opt-out of registration to hwrng. Cc: [email protected] # 6.1.y+ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs") Reported-by: [email protected] Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217719 Reported-by: [email protected] Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217212 Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-08-07sysctl: set variable key_sysctls storage-class-specifier to staticTom Rix1-1/+1
smatch reports security/keys/sysctl.c:12:18: warning: symbol 'key_sysctls' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-08-07tpm/tpm_tis: Disable interrupts for TUXEDO InfinityBook S 15/17 Gen7Takashi Iwai1-0/+8
TUXEDO InfinityBook S 15/17 Gen7 suffers from an IRQ problem on tpm_tis like a few other laptops. Add an entry for the workaround. Cc: [email protected] Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") Link: https://bugzilla.suse.com/show_bug.cgi?id=1213645 Signed-off-by: Takashi Iwai <[email protected]> Acked-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-08-07cpufreq: amd-pstate: fix global sysfs attribute typeThomas Weißschuh1-5/+5
In commit 3666062b87ec ("cpufreq: amd-pstate: move to use bus_get_dev_root()") the "amd_pstate" attributes where moved from a dedicated kobject to the cpu root kobject. While the dedicated kobject expects to contain kobj_attributes the root kobject needs device_attributes. As the changed arguments are not used by the callbacks it works most of the time. However CFI will detect this issue: [ 4947.849350] CFI failure at dev_attr_show+0x24/0x60 (target: show_status+0x0/0x70; expected type: 0x8651b1de) ... [ 4947.849409] Call Trace: [ 4947.849410] <TASK> [ 4947.849411] ? __warn+0xcf/0x1c0 [ 4947.849414] ? dev_attr_show+0x24/0x60 [ 4947.849415] ? report_cfi_failure+0x4e/0x60 [ 4947.849417] ? handle_cfi_failure+0x14c/0x1d0 [ 4947.849419] ? __cfi_show_status+0x10/0x10 [ 4947.849420] ? handle_bug+0x4f/0x90 [ 4947.849421] ? exc_invalid_op+0x1a/0x60 [ 4947.849422] ? asm_exc_invalid_op+0x1a/0x20 [ 4947.849424] ? __cfi_show_status+0x10/0x10 [ 4947.849425] ? dev_attr_show+0x24/0x60 [ 4947.849426] sysfs_kf_seq_show+0xa6/0x110 [ 4947.849433] seq_read_iter+0x16c/0x4b0 [ 4947.849436] vfs_read+0x272/0x2d0 [ 4947.849438] ksys_read+0x72/0xe0 [ 4947.849439] do_syscall_64+0x76/0xb0 [ 4947.849440] ? do_user_addr_fault+0x252/0x650 [ 4947.849442] ? exc_page_fault+0x7a/0x1b0 [ 4947.849443] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: 3666062b87ec ("cpufreq: amd-pstate: move to use bus_get_dev_root()") Reported-by: Jannik Glückert <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217765 Link: https://lore.kernel.org/lkml/[email protected]/ Cc: All applicable <[email protected]> Signed-off-by: Thomas Weißschuh <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-08-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds11-120/+182
Pull kvm fixes from Paolo Bonzini: "x86: - Fix SEV race condition ARM: - Fixes for the configuration of SVE/SME traps when hVHE mode is in use - Allow use of pKVM on systems with FF-A implementations that are v1.0 compatible - Request/release percpu IRQs (arch timer, vGIC maintenance) correctly when pKVM is in use - Fix function prototype after __kvm_host_psci_cpu_entry() rename - Skip to the next instruction when emulating writes to TCR_EL1 on AmpereOne systems Selftests: - Fix missing include" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests/rseq: Fix build with undefined __weak KVM: SEV: remove ghcb variable declarations KVM: SEV: only access GHCB fields once KVM: SEV: snapshot the GHCB before accessing it KVM: arm64: Skip instruction after emulating write to TCR_EL1 KVM: arm64: fix __kvm_host_psci_cpu_entry() prototype KVM: arm64: Fix resetting SME trap values on reset for (h)VHE KVM: arm64: Fix resetting SVE trap values on reset for hVHE KVM: arm64: Use the appropriate feature trap register when activating traps KVM: arm64: Helper to write to appropriate feature trap register based on mode KVM: arm64: Disable SME traps for (h)VHE at setup KVM: arm64: Use the appropriate feature trap register for SVE at EL2 setup KVM: arm64: Factor out code for checking (h)VHE mode into a macro KVM: arm64: Rephrase percpu enable/disable tracking in terms of hyp KVM: arm64: Fix hardware enable/disable flows for pKVM KVM: arm64: Allow pKVM on v1.0 compatible FF-A implementations
2023-08-07Merge tag 'mmc-v6.5-rc1' of ↵Linus Torvalds2-40/+28
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - moxart: Fix big-endian conversion for SCR structure - sdhci-f-sdh30: Replace with sdhci_pltfm to fix PM support * tag 'mmc-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-f-sdh30: Replace with sdhci_pltfm mmc: moxart: read scr register without changing byte order
2023-08-07gfs2: Don't use filemap_splice_readBob Peterson1-2/+2
Starting with patch 2cb1e08985, gfs2 started using the new function filemap_splice_read rather than the old (and subsequently deleted) function generic_file_splice_read. filemap_splice_read works by taking references to a number of folios in the page cache and splicing those folios into a pipe. The folios are then read from the pipe and the folio references are dropped. This can take an arbitrary amount of time. We cannot allow that in gfs2 because those folio references will pin the inode glock to the node and prevent it from being demoted, which can lead to cluster-wide deadlocks. Instead, use copy_splice_read. (In addition, the old generic_file_splice_read called into ->read_iter, which called gfs2_file_read_iter, which took the inode glock during the operation. The new filemap_splice_read interface does not take the inode glock anymore. This is fixable, but it still wouldn't prevent cluster-wide deadlocks.) Fixes: 2cb1e08985e3 ("splice: Use filemap_splice_read() instead of generic_file_splice_read()") Signed-off-by: Bob Peterson <[email protected]> Signed-off-by: Andreas Gruenbacher <[email protected]>
2023-08-07gfs2: Fix freeze consistency check in gfs2_trans_add_metaAndreas Gruenbacher1-4/+10
Function gfs2_trans_add_meta() checks for the SDF_FROZEN flag to make sure that no buffers are added to a transaction while the filesystem is frozen. With the recent freeze/thaw rework, the SDF_FROZEN flag is cleared after thaw_super() is called, which is sufficient for serializing freeze/thaw. However, other filesystem operations started after thaw_super() may now be calling gfs2_trans_add_meta() before the SDF_FROZEN flag is cleared, which will trigger the SDF_FROZEN check in gfs2_trans_add_meta(). Fix that by checking the s_writers.frozen state instead. In addition, make sure not to call gfs2_assert_withdraw() with the sd_log_lock spin lock held. Check for a withdrawn filesystem before checking for a frozen filesystem, and don't pin/add buffers to the current transaction in case of a failure in either case. Signed-off-by: Andreas Gruenbacher <[email protected]> Signed-off-by: Bob Peterson <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.