aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-08-03qlcnic: Removed adapter series name from warning messages.Pratik Pujar2-2/+2
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Free up memory in error path.Himanshu Madhani1-3/+3
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix ingress MAC learningShahed Shaikh1-33/+66
o Delete MAC address from the adapter's filter table if the source MAC address of ingress packet matches. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix MAC address filter issue on 82xx adapterShahed Shaikh1-1/+1
Driver was passing the address of a pointer instead of the pointer itself. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03fib_rules: reorder struct fib_rules fieldsEric Dumazet1-5/+7
Move refcnt, pref, suppress_ifgroup, suppress_prefixlen out of first cache line, as they are not used in fast path. Make sure ctarget & fr_net are in first cache line. (Assuming 64 bit arches and 64 bytes cache lines) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03net: ethernet: davinci_emac: drop IRQF_DISABLEDMugunthan V N1-2/+1
IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linuxLinus Torvalds4-8/+10
Pull nfsd bugfixes from Bruce Fields: "Most of this is due to a screwup on my part -- some gss-proxy crashes got fixed before the merge window but somehow never made it out of a temporary git repo on my laptop...." * 'for-3.11' of git://linux-nfs.org/~bfields/linux: svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcall svcrpc: fix kfree oops in gss-proxy code svcrpc: fix gss-proxy xdr decoding oops svcrpc: fix gss_rpc_upcall create error NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure.
2013-08-03Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix chip initialization/configuration in MAX6697 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max6697) fix MAX6581 ideality
2013-08-03Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds3-28/+31
Pull arm fixes fixes from Russell King: "This fixes a couple of problems with commit 48be69a026b2 ("ARM: move signal handlers into a vdso-like page"), one of which was originally discovered via my testing originally, but the fix for it was never actually committed. The other shows up on noMMU builds, and such platforms are extremely rare and as such are not part of my nightly testing" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like page) ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)
2013-08-03fib_rules: fix suppressor names and default valuesStefan Tomanek5-9/+16
This change brings the suppressor attribute names into line; it also changes the data types to provide a more consistent interface. While -1 indicates that the suppressor is not enabled, values >= 0 for suppress_prefixlen or suppress_ifgroup reject routing decisions violating the constraint. This changes the previously presented behaviour of suppress_prefixlen, where a prefix length _less_ than the attribute value was rejected. After this change, a prefix length less than *or* equal to the value is considered a violation of the rule constraint. It also changes the default values for default and newly added rules (disabling any suppression for those). Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03vlan: cleanup the usage of vlan_dev_priv(dev)Wang Sheng-Hui2-8/+10
This patch cleanup 2 points for the usage of vlan_dev_priv(dev): * In vlan_dev.c/vlan_dev_hard_header, we should use the var *vlan directly after grabing the pointer at the beginning with *vlan = vlan_dev_priv(dev); when we need to access the fields of *vlan. * In vlan.c/register_vlan_device, add the var *vlan pointer struct vlan_dev_priv *vlan; to cleanup the code to access the fields of vlan_dev_priv(new_dev). Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03hwmon: (max6697) fix MAX6581 idealityVivien Didelot1-2/+2
Without this patch, the values for ideality (register 0x4b) and ideality selection mask (register 0x4c) are inverted. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 3.9+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-03Merge branch 'security-fixes' into fixesRussell King3-28/+31
2013-08-03ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a ↵Russell King2-2/+7
vdso-like page) Olof reports that noMMU builds error out with: arch/arm/kernel/signal.c: In function 'setup_return': arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage' This shows one of the evilnesses of IS_ENABLED(). Get rid of it here and replace it with #ifdef's - and as no noMMU platform can make use of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-03ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)Russell King2-26/+24
Unfortunately, I never committed the fix to a nasty oops which can occur as a result of that commit: ------------[ cut here ]------------ kernel BUG at /home/olof/work/batch/include/linux/mm.h:414! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe0308 #53 task: e90acac0 ti: e9be8000 task.ti: e9be8000 PC is at special_mapping_fault+0xa4/0xc4 LR is at __do_fault+0x68/0x48c This doesn't show up unless you do quite a bit of testing; a simple boot test does not do this, so all my nightly tests were passing fine. The reason for this is that install_special_mapping() expects the page array to stick around, and as this was only inserting one page which was stored on the kernel stack, that's why this was blowing up. Reported-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-02netlabel: use domain based selectors when address based selectors are not ↵Paul Moore6-158/+130
available NetLabel has the ability to selectively assign network security labels to outbound traffic based on either the LSM's "domain" (different for each LSM), the network destination, or a combination of both. Depending on the type of traffic, local or forwarded, and the type of traffic selector, domain or address based, different hooks are used to label the traffic; the goal being minimal overhead. Unfortunately, there is a bug such that a system using NetLabel domain based traffic selectors does not correctly label outbound local traffic that is not assigned to a socket. The issue is that in these cases the associated NetLabel hook only looks at the address based selectors and not the domain based selectors. This patch corrects this by checking both the domain and address based selectors so that the correct labeling is applied, regardless of the configuration type. In order to acomplish this fix, this patch also simplifies some of the NetLabel domainhash structures to use a more common outbound traffic mapping type: struct netlbl_dommap_def. This simplifies some of the code in this patch and paves the way for further simplifications in the future. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02cnic, bnx2i: Fix bug on some bnx2x devices that don't support iSCSIMichael Chan2-7/+12
On some bnx2x devices, iSCSI is determined to be unsupported only after firmware is downloaded. We need to check max_iscsi_conn again after NETDEV_UP and block iSCSI init operations. Without this fix, iscsiadm can hang as the firmware will not respond to the iSCSI init message. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02Merge branch 'bond_neigh_parms'David S. Miller2-5/+13
Veaceslav Falico says: ==================== Recent patches revealed an old bug, which was there for quite awhile. It's related to vlan on top of bonding and ndo_neigh_setup(). When vlan device is initiated, it calls its real_dev->ndo_neigh_setup(), and in case of bonding - it will modify neigh_parms->neigh_setup to point to bond_neigh_init, while neigh_parms are of vlan's dev. This way, when neigh_parms->neigh_setup() of vlan's dev is called, the bonding function will be called, which expects the dev to be struct bonding, but will receive a vlan dev. It was hidden before because of bond->first_slave usage. Now, with Nikolay's conversion to list/RCU, first_slave is gone and we hit a null pointer dereference when working with lists/slave. First patch moves ndo_neigh_setup() in neigh_parms_alloc() to the bottom, so that the ->dev will be available to the caller. It doesn't really change anything, however is needed for the second patch. Second patch makes bond_neigh_setup() (bond->ndo_neigh_setup()) check if the neigh_parms are really from a bonding dev, and only modify the neigh_setup in this case. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02bonding: modify only neigh_parms owned by usVeaceslav Falico1-1/+7
Otherwise, on neighbour creation, bond_neigh_init() will be called with a foreign netdev. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02neighbour: populate neigh_parms on alloc before calling ndo_neigh_setupVeaceslav Falico1-4/+6
dev->ndo_neigh_setup() might need some of the values of neigh_parms, so populate them before calling it. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02net: netlink: minor: remove unused pointer in alloc_pg_vecDaniel Borkmann1-2/+2
Variable ptr is being assigned, but never used, so just remove it. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02fib_rules: add route suppression based on ifgroupStefan Tomanek5-10/+43
This change adds the ability to suppress a routing decision based upon the interface group the selected interface belongs to. This allows it to exclude specific devices from a routing decision. Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02net: check net.core.somaxconn sysctl valuesRoman Gushchin1-1/+5
It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Reported-by: Changli Gao <xiaosuo@gmail.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02icmpv6_filter: allow ICMPv6 messages with bodies < 4 bytesWerner Almesberger1-1/+6
By using sizeof(_hdr), net/ipv6/raw.c:icmpv6_filter implicitly assumes that any valid ICMPv6 message is at least eight bytes long, i.e., that the message body is at least four bytes. The DIS message of RPL (RFC 6550 section 6.2, from the 6LoWPAN world), has a minimum length of only six bytes, and is thus blocked by icmpv6_filter. RFC 4443 seems to allow even a zero-sized body, making the minimum allowable message size four bytes. Signed-off-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02icmpv6_filter: fix "_hdr" incorrectly being a pointerWerner Almesberger1-1/+1
"_hdr" should hold the ICMPv6 header while "hdr" is the pointer to it. This worked by accident. Signed-off-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02sis900: Fix the tx queue timeout issueDenis Kirjanov1-10/+2
[ 198.720048] ------------[ cut here ]------------ [ 198.720108] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:255 dev_watchdog+0x229/0x240() [ 198.720118] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out [ 198.720125] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 mii [ 198.720159] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc3+ #12 [ 198.720167] Hardware name: System Manufacturer System Name/TUSI-M, BIOS ASUS TUSI-M ACPI BIOS Revision 1013 Beta 001 12/14/2001 [ 198.720175] 000000ff c13fa6b9 c169ddcc c12208d6 c169ddf8 c1031e4d c1664a84 c169de24 [ 198.720197] 00000000 c165f5ea 000000ff c13fa6b9 00000001 000000ff c1664a84 c169de10 [ 198.720217] c1031f13 00000009 c169de08 c1664a84 c169de24 c169de50 c13fa6b9 c165f5ea [ 198.720240] Call Trace: [ 198.720257] [<c13fa6b9>] ? dev_watchdog+0x229/0x240 [ 198.720274] [<c12208d6>] dump_stack+0x16/0x20 [ 198.720306] [<c1031e4d>] warn_slowpath_common+0x7d/0xa0 [ 198.720318] [<c13fa6b9>] ? dev_watchdog+0x229/0x240 [ 198.720330] [<c1031f13>] warn_slowpath_fmt+0x33/0x40 [ 198.720342] [<c13fa6b9>] dev_watchdog+0x229/0x240 [ 198.720357] [<c103f158>] call_timer_fn+0x78/0x150 [ 198.720369] [<c103f0e0>] ? internal_add_timer+0x40/0x40 [ 198.720381] [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0 [ 198.720392] [<c103f33f>] run_timer_softirq+0x10f/0x200 [ 198.720412] [<c103954f>] ? __do_softirq+0x6f/0x210 [ 198.720424] [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0 [ 198.720435] [<c1039598>] __do_softirq+0xb8/0x210 [ 198.720467] [<c14b54d2>] ? _raw_spin_unlock+0x22/0x30 [ 198.720484] [<c1003245>] ? handle_irq+0x25/0xd0 [ 198.720496] [<c1039c0c>] irq_exit+0x9c/0xb0 [ 198.720508] [<c14bc9d7>] do_IRQ+0x47/0x94 [ 198.720534] [<c1056078>] ? hrtimer_start+0x28/0x30 [ 198.720564] [<c14bc8b1>] common_interrupt+0x31/0x38 [ 198.720589] [<c1008692>] ? default_idle+0x22/0xa0 [ 198.720600] [<c10083c7>] arch_cpu_idle+0x17/0x30 [ 198.720631] [<c106d23d>] cpu_startup_entry+0xcd/0x180 [ 198.720643] [<c14ae30a>] rest_init+0xaa/0xb0 [ 198.720654] [<c14ae260>] ? reciprocal_value+0x50/0x50 [ 198.720668] [<c17044e0>] ? repair_env_string+0x60/0x60 [ 198.720679] [<c1704bda>] start_kernel+0x29a/0x350 [ 198.720690] [<c17044e0>] ? repair_env_string+0x60/0x60 [ 198.720721] [<c1704269>] i386_start_kernel+0x39/0xa0 [ 198.720729] ---[ end trace 81e0a6266f5c73a8 ]--- [ 198.720740] eth0: Transmit timeout, status 00000204 00000000 timer routine checks the link status and if it's up calls netif_carrier_on() allowing upper layer to start the tx queue even if the auto-negotiation process is not finished. Also remove ugly auto-negotiation check from the sis900_start_xmit() CC: Duan Fugang <B38611@freescale.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02af_packet: simplify VLAN frame check in packet_sndPhil Sutter1-11/+4
For ethernet frames, eth_type_trans() already parses the header, so one can skip this when checking the frame size. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02af_packet: fix for sending VLAN frames via packet_mmapPhil Sutter1-11/+14
Since tpacket_fill_skb() parses the protocol field in ethernet frames' headers, it's easy to see if any passed frame is a VLAN one and account for the extended size. But as the real protocol does not turn up before tpacket_fill_skb() runs which in turn also checks the frame length, move the max frame length calculation into the function. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02af_packet: when sending ethernet frames, parse header for skb->protocolPhil Sutter1-2/+11
This may be necessary when the SKB is passed to other layers on the go, which check the protocol field on their own. An example is a VLAN packet sent out using AF_PACKET on a bridge interface. The bridging code checks the SKB size, accounting for any VLAN header only if the protocol field is set accordingly. Note that eth_type_trans() sets skb->dev to the passed argument, so this can be skipped in packet_snd() for ethernet frames, as well. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02Merge tag 'rdma-for-linus' of ↵Linus Torvalds21-56/+232
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: - Fixes for the newly merged mlx5 hardware driver - Stack info leak fixes from Dan Carpenter - Fixes for pkey table handling with SR-IOV - A few other small things * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix pkey change flow for virtualization environments IPoIB: Make sure child devices use valid/proper pkeys IB/core: Create QP1 using the pkey index which contains the default pkey mlx5_core: Variable may be used uninitialized mlx5_core: Implement new initialization sequence mlx5_core: Fix use after free in mlx5_cmd_comp_handler() IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext() IB/mlx5: Fix error return code in init_one() IB/mlx4: Use default pkey when creating tunnel QPs RDMA/cma: Only call cma_save_ib_info() for CM REQs RDMA/cma: Fix accessing invalid private data for UD RDMA/cma: Fix gcc warning Revert "RDMA/nes: Fix compilation error when nes_debug is enabled" IB/qib: Add err_decode() call for ring dump RDMA/cxgb3: Fix stack info leak in iwch_create_cq() RDMA/nes: Fix info leaks in nes_create_qp() and nes_create_cq() RDMA/ocrdma: Fix several stack info leaks RDMA/cxgb4: Fix stack info leak in c4iw_create_qp() RDMA/ocrdma: Remove unused include
2013-08-02Merge tag 'gpio-for-v3.11-3' of ↵Linus Torvalds2-70/+15
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Yet another GPIO pull request, fixing the fix from the last one. It turns out that fixing the boot path for device tree boots on OMAP breaks out antique systems (such as OMAP1) and we need to find a better way. So we're reverting that "fix" for the moment and thinking about something better. Also fixing a build issue on the MSM driver" * tag 'gpio-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio_msm: Fix build error due to missing err.h Revert "gpio/omap: don't create an IRQ mapping for every GPIO on DT" Revert "gpio/omap: auto request GPIO as input if used as IRQ via DT" Revert "gpio/omap: fix build error when OF_GPIO is not defined."
2013-08-02net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing failsDaniel Borkmann1-1/+3
Commit 5c766d642 ("ipv4: introduce address lifetime") leaves the ifa resource that was allocated via inet_alloc_ifa() unfreed when returning the function with -EINVAL. Thus, free it first via inet_free_ifa(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02r8169: remove "PHY reset until link up" log spamLekensteyn1-1/+1
This message was added in commit a7154cb8 (June 2004, [PATCH] r8169: link handling and phy reset rework) and is printed every ten seconds when no cable is connected and runtime power management is disabled. (Before that commit, "Reset RTL8169s PHY" would be printed instead.) Signed-off-by: Peter Wu <lekensteyn@gmail.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02net: ethernet: cpsw: drop IRQF_DISABLEDFelipe Balbi1-1/+1
IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02htb: fix sign extension bugstephen hemminger1-1/+1
When userspace passes a large priority value the assignment of the unsigned value hopt->prio to signed int cl->prio causes cl->prio to become negative and the comparison is with TC_HTB_NUMPRIO is always false. The result is that HTB crashes by referencing outside the array when processing packets. With this patch the large value wraps around like other values outside the normal range. See: https://bugzilla.kernel.org/show_bug.cgi?id=60669 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02Merge branch 'merge' of ↵Linus Torvalds9-34/+82
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here is not quite a handful of powerpc fixes for rc3. The windfarm fix is a regression fix (though not a new one), the PMU interrupt rename is not a fix per-se but has been submitted a long time ago and I kept forgetting to put it in (it puts us back in sync with x86), the other perf bit is just about putting an API/ABI bit definition in the right place for userspace to consume, and finally, we have a fix for the VPHN (Virtual Partition Home Node) feature (notification that the hypervisor is moving nodes around) which could cause lockups so we may as well fix it now" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/windfarm: Fix noisy slots-fan on Xserve (rm31) powerpc: VPHN topology change updates all siblings powerpc/perf: Export PERF_EVENT_CONFIG_EBB_SHIFT to userspace powerpc: Rename PMU interrupts from CNT to PMI
2013-08-02Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds34-234/+385
Pull ARM fixes from Russell King: "I've thought long and hard about what to say for this pull request, and I really can't work out anything sane to say to summarise much of these commits. The problem is, for most of these are, yet again, lots of small bits scattered around the place without any real overall theme to them" Most notable is probably the kuser page helper improvements. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (22 commits) ARM: Add .text annotations where required after __CPUINIT removal ARM: 7803/1: Fix deadlock scenario with smp_send_stop() ARM: make vectors page inaccessible from userspace ARM: move signal handlers into a vdso-like page ARM: allow kuser helpers to be removed from the vector page ARM: update FIQ support for relocation of vectors ARM: use linker magic for vectors and vector stubs ARM: move vector stubs ARM: poison memory between kuser helpers ARM: poison the vectors page ARM: 7801/1: v6: prevent gcc 4.5 from reordering extended CP15 reads above is_smp() test ARM: 7800/1: ARMv7-M: Fix name of NVIC handler function ARM: Fix sorting of machine- initializers ARM: 7791/1: a.out: remove partial a.out support ARM: 7790/1: Fix deferred mm switch on VIVT processors ARM: 7789/1: Do not run dummy_flush_tlb_a15_erratum() on non-Cortex-A15 ARM: 7787/1: virt: ensure visibility of __boot_cpu_mode ARM: 7788/1: elf: fix lpae hwcap feature reporting in proc/cpuinfo ARM: 7786/1: hyp: fix macro parameterisation ARM: 7785/1: mm: restrict early_alloc to section-aligned memory ...
2013-08-02Merge branch 'parisc-3.11-rc4' of ↵Linus Torvalds11-125/+386
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "The majority of lines changed are due the addition of a defconfig for the C8000 machine. Even the fix in parisc/kernel/cache.c file is actually ony a 10-line fix, but the change became bigger (and much nicer) to avoid errors of the checkpatch script. Here is the short-changelog: This round of parisc updates includes mostly fixes for the C8000 workstation. We have a new defconfig file for this machine, as well as fixes for it's serial port, the AGP driver and the cache routines to cope with the vmas of the FireGL card in a C8000. The sys32.h header file was not used and as such it's now gone" * 'parisc-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix interrupt routing for C8000 serial ports parisc: Remove arch/parisc/kernel/sys32.h header parisc: add defconfig for c8000 machine parisc: agp/parisc-agp: allow binding of user memory to the AGP GART parisc: Fix cache routines to ignore vma's with an invalid pfn
2013-08-02Merge branch 'for-linus' of ↵Linus Torvalds4-2/+51
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix hid-sony PS3 sixaxxis breakage from Benjamin Tissories - fix hidraw race condition from Yonghua Zheng - fix/bandaid for rare device enumeration problems of Logitech Unifying receivers from Nestor Lopez Casado * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hidraw: fix improper mutex release HID: sony: fix HID mapping for PS3 sixaxis controller HID: hid-logitech-dj: querying_devices was never set HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""
2013-08-02Merge tag 'please-pull-fix-mce-regression' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull MCE fix from Tony Luck: "Fix a regression in mce-severity.c" * tag 'please-pull-fix-mce-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: x86/mce: Fix mce regression from recent cleanup
2013-08-02Merge tag 'pci-v3.11-fixes-1' of ↵Linus Torvalds13-44/+87
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Yinghai fixed a couple regressions: one resource assignment problem introduced in v3.10 that showed up with SR-IOV on powerpc, and another SR-IOV hot-remove issue related to refcounting changes we merged for v3.11. Yinghai is still working on another SR-IOV-related fix or two, which will be simpler if pciehp is non-modular, so I included the Kconfig changes now to get them in earlier. Finally, a minor fix for the ARM Marvell EBU host bridge driver that was merged for v3.11 Hotplug: PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device PCI: hotplug: Convert to be builtin only, not modular PCI: pciehp: Convert pciehp to be builtin only, not modular Resource allocation: PCI: Retry allocation of only the resource type that failed ARM: PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge" * tag 'pci-v3.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge PCI: Retry allocation of only the resource type that failed PCI: pciehp: Convert pciehp to be builtin only, not modular PCI: hotplug: Convert to be builtin only, not modular PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device
2013-08-02sctp: Don't lookup dst if transport dst is still validfan.du3-2/+3
When sctp sits on IPv6, sctp_transport_dst_check pass cookie as ZERO, as a result ip6_dst_check always fail out. This behaviour makes transport->dst useless, because every sctp_packet_transmit must look for valid dst. Add a dst_cookie into sctp_transport, and set the cookie whenever we get new dst for sctp_transport. So dst validness could be checked against it. Since I have split genid for IPv4 and IPv6, also delete/add IPv6 address will also bump IPv6 genid. So issues we discussed in: http://marc.info/?l=linux-netdev&m=137404469219410&w=4 have all been sloved for this patch. Signed-off-by: Fan Du <fan.du@windriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02Merge branch 'eth_alen'David S. Miller28-79/+99
Joe Perches says: ==================== Convert the uses mac addresses to ETH_ALEN so it's easier to find and verify where mac addresses need to be __aligned(2) Change in V2: - Remove include/acpi/actbl2.h conversion It's a file copied from outside ACPI sources Changes in V3: - Don't move the pasemi_mac.h mac address to be aligned(2) Just note that it's unaligned. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02ethernet: Convert mac address uses of 6 to ETH_ALENJoe Perches11-26/+29
Use the normal #define to help grep find mac addresses and ensure that addresses are aligned. pasemi.h has an unaligned access to mac_addr, unchanged for now. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Olof Johansson <olof@lixom.net> # pasemi_mac pieces Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02include: Convert ethernet mac address declarations to use ETH_ALENJoe Perches11-45/+58
It's convenient to have ethernet mac addresses use ETH_ALEN to be able to grep for them a bit easier and also to ensure that the addresses are __aligned(2). Add #include <linux/if_ether.h> as necessary. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02uapi: Convert some uses of 6 to ETH_ALENJoe Perches6-8/+12
Use the #define where appropriate. Add #include <linux/if_ether.h> where appropriate too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02Merge tag 'pm+acpi-3.11-rc4' of ↵Linus Torvalds8-125/+31
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Revert two cpuidle commits added during the 3.8 development cycle that turn out to have introduced a significant performance regression as requested by Jeremy Eder. - The recent patches that made the freezer less heavy-weight introduced a regression causing user-space-driven hibernation using the ioctl() interface to block indefinitely when the hibernate process executes try_to_freeze(). Fix from Colin Cross addresses this by adding a process flag to mark the hibernate/suspend process to inform the freezer that that process should be ignored. - One of the recent cpufreq reverts uncovered a problem in the core causing the cpufreq driver module refcount to become negative after a system suspend-resume cycle. Fix from Rafael J Wysocki. - The evaluation of the ACPI battery _BIX method has never worked correctly, because the commit that added support for it forgot to take the "Revision" field in the return package into account. As a result, the reading of battery info doesn't work at all on some systems, which is addressed by a fix from Lan Tianyu. * tag 'pm+acpi-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: freezer: set PF_SUSPEND_TASK flag on tasks that call freeze_processes ACPI / battery: Fix parsing _BIX return value cpufreq: Fix cpufreq driver module refcount balance after suspend/resume Revert "cpuidle: Quickly notice prediction failure for repeat mode" Revert "cpuidle: Quickly notice prediction failure in general case"
2013-08-01Merge branch 'qlcnic'David S. Miller8-309/+651
Himanshu Madhani says: ==================== This series contains following patches o in v2 series, we received feedback on return codes to use standard error codes instead of mixing custom error codes. We have modified patch for loopback diagnostic test to return standard error codes. o rest of the 3 patches in the series are for mailbox refactoring Current driver-firmware mailbox interface was operating in polling mode because of some limitations with the earlier versions of 83xx adapter firmware. These issues are resolved now and we are implementing the mailbox interface in interrupt mode. There are three patches which refactors mailbox handling: * Interrupt mode mailbox implantation. * Replace poll mode mailbox interfaces with interrupt mode interfaces. * Operate mailbox in poll mode when interrupts are not available. changes from v2 -> v3 * Addressed review feedback to use standard return codes for loopback diagnostic test. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01qlcnic: Update version to 5.2.45Himanshu Madhani1-2/+2
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01qlcnic: Enable mailbox interface in poll mode when interrupts are not availableManish Chopra1-7/+11
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.