Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull cifs fixes from Steve French:
"A few small SMB3 fixes, and a larger one to fix various older string
handling functions"
* tag '5.3-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: replace various strncpy with strscpy and similar
cifs: Use kzfree() to zero out the password
cifs: set domainName when a domain-key is used in multiuser
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix fall-through warnings on arc and nds32 for multiple
configurations"
* tag 'Wimplicit-fallthrough-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
nds32: Mark expected switch fall-throughs
ARC: unwind: Mark expected switch fall-through
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fix from Miquel Raynal:
"Add a 'depends on' in the core Hyperbus Kconfig entry to avoid build
errors"
* tag 'mtd/fixes-for-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: hyperbus: fix dependency and build error
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: allmodconfig nds32):
include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/nds32/kernel/signal.c:362:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/nds32/kernel/signal.c:315:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
Reported-by: Michael Ellerman <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: haps_hs_defconfig arc):
arch/arc/kernel/unwind.c: In function ‘read_pointer’:
./include/linux/compiler.h:328:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
do { \
^
./include/linux/compiler.h:338:2: note: in expansion of macro ‘__compiletime_assert’
__compiletime_assert(condition, msg, prefix, suffix)
^~~~~~~~~~~~~~~~~~~~
./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
^~~~~~~~~~~~~~~~
arch/arc/kernel/unwind.c:573:3: note: in expansion of macro ‘BUILD_BUG_ON’
BUILD_BUG_ON(sizeof(u32) != sizeof(value));
^~~~~~~~~~~~
arch/arc/kernel/unwind.c:575:2: note: here
case DW_EH_PE_native:
^~~~
Signed-off-by: Gustavo A. R. Silva <[email protected]>
|
|
lib/devres.c, which implements devm_ioremap_resource(), is only built
when CONFIG_HAS_IOMEM is set/enabled, so MTD_HYPERBUS should depend
on HAS_IOMEM. Fixes a build error and a Kconfig warning (as seen on
UML builds):
WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS
Depends on [n]: MTD [=m] && HAS_IOMEM [=n]
Selected by [m]:
- MTD_HYPERBUS [=m] && MTD [=m]
ERROR: "devm_ioremap_resource" [drivers/mtd/hyperbus/hyperbus-core.ko] undefined!
Fixes: dcc7d3446a0f ("mtd: Add support for HyperBus memory devices")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Vignesh Raghavendra <[email protected]>
Cc: Miquel Raynal <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: [email protected]
Acked-by: Vignesh Raghavendra <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Hot on the heels of our last set of fixes are a few more for -rc7.
Two of them are fixing issues with our virtual interrupt controller
implementation in KVM/arm, while the other is a longstanding but
straightforward kallsyms fix which was been acked by Masami and
resolves an initialisation failure in kprobes observed on arm64.
- Fix GICv2 emulation bug (KVM)
- Fix deadlock in virtual GIC interrupt injection code (KVM)
- Fix kprobes blacklist init failure due to broken kallsyms lookup"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI
KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long
kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol
|
|
A guest is not allowed to inject a SGI (or clear its pending state)
by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are
defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8).
Make sure we correctly emulate the architecture.
Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers")
Cc: [email protected] # 4.7+
Reported-by: Andre Przywara <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
To 2.22
Signed-off-by: Steve French <[email protected]>
|
|
Using strscpy is cleaner, and avoids some problems with
handling maximum length strings. Linus noticed the
original problem and Aurelien pointed out some additional
problems. Fortunately most of this is SMB1 code (and
in particular the ASCII string handling older, which
is less common).
Reported-by: Linus Torvalds <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
It's safer to zero out the password so that it can never be disclosed.
Fixes: 0c219f5799c7 ("cifs: set domainName when a domain-key is used in multiuser")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
RHBZ: 1710429
When we use a domain-key to authenticate using multiuser we must also set
the domainnmame for the new volume as it will be used and passed to the server
in the NTLMSSP Domain-name.
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix a page lock leak in nfs_pageio_resend()
- Ensure O_DIRECT reports an error if the bytes read/written is 0
- Don't handle errors if the bind/connect succeeded
- Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was
invalidat ed"
Bugfixes:
- Don't refresh attributes with mounted-on-file information
- Fix return values for nfs4_file_open() and nfs_finish_open()
- Fix pnfs layoutstats reporting of I/O errors
- Don't use soft RPC calls for pNFS/flexfiles I/O, and don't abort
for soft I/O errors when the user specifies a hard mount.
- Various fixes to the error handling in sunrpc
- Don't report writepage()/writepages() errors twice"
* tag 'nfs-for-5.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: remove set but not used variable 'mapping'
NFSv2: Fix write regression
NFSv2: Fix eof handling
NFS: Fix writepage(s) error handling to not report errors twice
NFS: Fix spurious EIO read errors
pNFS/flexfiles: Don't time out requests on hard mounts
SUNRPC: Handle connection breakages correctly in call_status()
Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated"
SUNRPC: Handle EADDRINUSE and ENOBUFS correctly
pNFS/flexfiles: Turn off soft RPC calls
SUNRPC: Don't handle errors if the bind/connect succeeded
NFS: On fatal writeback errors, we need to call nfs_inode_remove_request()
NFS: Fix initialisation of I/O result struct in nfs_pgio_rpcsetup
NFS: Ensure O_DIRECT reports an error if the bytes read/written is 0
NFSv4/pnfs: Fix a page lock leak in nfs_pageio_resend()
NFSv4: Fix return value in nfs_finish_open()
NFSv4: Fix return values for nfs4_file_open()
NFS: Don't refresh attributes with mounted-on-file information
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- support for Edge Triggered IRQs in ARC IDU intc
- other fixes here and there
* tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: prefer __section from compiler_attributes.h
dt-bindings: IDU-intc: Add support for edge-triggered interrupts
dt-bindings: IDU-intc: Clean up documentation
ARCv2: IDU-intc: Add support for edge-triggered interrupts
ARC: unwind: Mark expected switch fall-throughs
ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations
ARC: fix typo in setup_dma_ops log message
ARCv2: entry: early return from exception need not clear U & DE bits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
"Identify potentially unused functions in rk808 driver when !PM"
* tag 'mfd-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: rk808: Make PM function declaration static
mfd: rk808: Mark pm functions __maybe_unused
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes as usual:
- More coverage of USB-audio descriptor sanity checks
- A fix for mute LED regression on Conexant HD-audio codecs
- A few device-specific fixes and quirks for USB-audio and HD-audio
- A fix for (die-hard remaining) possible race in sequencer core
- FireWire oxfw regression fix that was introduced in 5.3-rc1"
* tag 'sound-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: oxfw: fix to handle correct stream for PCM playback
ALSA: seq: Fix potential concurrent access to the deleted pool
ALSA: usb-audio: Check mixer unit bitmap yet more strictly
ALSA: line6: Fix memory leak at line6_init_pcm() error path
ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate()
ALSA: hda/ca0132 - Add new SBZ quirk
ALSA: usb-audio: Add implicit fb quirk for Behringer UFX1604
ALSA: hda - Fixes inverted Conexant GPIO mic mute led
|
|
Pull networking fixes from David Miller:
1) Use 32-bit index for tails calls in s390 bpf JIT, from Ilya
Leoshkevich.
2) Fix missed EPOLLOUT events in TCP, from Eric Dumazet. Same fix for
SMC from Jason Baron.
3) ipv6_mc_may_pull() should return 0 for malformed packets, not
-EINVAL. From Stefano Brivio.
4) Don't forget to unpin umem xdp pages in error path of
xdp_umem_reg(). From Ivan Khoronzhuk.
5) Fix sta object leak in mac80211, from Johannes Berg.
6) Fix regression by not configuring PHYLINK on CPU port of bcm_sf2
switches. From Florian Fainelli.
7) Revert DMA sync removal from r8169 which was causing regressions on
some MIPS Loongson platforms. From Heiner Kallweit.
8) Use after free in flow dissector, from Jakub Sitnicki.
9) Fix NULL derefs of net devices during ICMP processing across
collect_md tunnels, from Hangbin Liu.
10) proto_register() memory leaks, from Zhang Lin.
11) Set NLM_F_MULTI flag in multipart netlink messages consistently,
from John Fastabend.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
r8152: Set memory to all 0xFFs on failed reg reads
openvswitch: Fix conntrack cache with timeout
ipv4: mpls: fix mpls_xmit for iptunnel
nexthop: Fix nexthop_num_path for blackhole nexthops
net: rds: add service level support in rds-info
net: route dump netlink NLM_F_MULTI flag missing
s390/qeth: reject oversized SNMP requests
sock: fix potential memory leak in proto_register()
MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT
xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode
ipv4/icmp: fix rt dst dev null pointer dereference
openvswitch: Fix log message in ovs conntrack
bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0
bpf: fix use after free in prog symbol exposure
bpf: fix precision tracking in presence of bpf2bpf calls
flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH
Revert "r8169: remove not needed call to dma_sync_single_for_device"
ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev
net/ncsi: Fix the payload copying for the request coming from Netlink
qed: Add cleanup in qed_slowpath_start()
...
|
|
If the ap_list is longer than 256 entries, merge_final() in list_sort()
will call the comparison callback with the same element twice, causing
a deadlock in vgic_irq_cmp().
Fix it by returning early when irqa == irqb.
Cc: [email protected] # 4.7+
Fixes: 8e4447457965 ("KVM: arm/arm64: vgic-new: Add IRQ sorting")
Signed-off-by: Zenghui Yu <[email protected]>
Signed-off-by: Heyi Guo <[email protected]>
[maz: massaged commit log and patch, added Fixes and Cc-stable]
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
first symbol
An arm64 kernel configured with
CONFIG_KPROBES=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
reports the following kprobe failure:
[ 0.032677] kprobes: failed to populate blacklist: -22
[ 0.033376] Please take care of using kprobes.
It appears that kprobe fails to retrieve the symbol at address
0xffff000010081000, despite this symbol being in System.map:
ffff000010081000 T __exception_text_start
This symbol is part of the first group of aliases in the
kallsyms_offsets array (symbol names generated using ugly hacks in
scripts/kallsyms.c):
kallsyms_offsets:
.long 0x1000 // do_undefinstr
.long 0x1000 // efi_header_end
.long 0x1000 // _stext
.long 0x1000 // __exception_text_start
.long 0x12b0 // do_cp15instr
Looking at the implementation of get_symbol_pos(), it returns the
lowest index for aliasing symbols. In this case, it return 0.
But kallsyms_lookup_size_offset() considers 0 as a failure, which
is obviously wrong (there is definitely a valid symbol living there).
In turn, the kprobe blacklisting stops abruptly, hence the original
error.
A CONFIG_KALLSYMS_ALL kernel wouldn't fail as there is always
some random symbols at the beginning of this array, which are never
looked up via kallsyms_lookup_size_offset.
Fix it by considering that get_symbol_pos() is always successful
(which is consistent with the other uses of this function).
Fixes: ffc5089196446 ("[PATCH] Create kallsyms_lookup_size_offset()")
Reviewed-by: Masami Hiramatsu <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Catalin Marinas <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
fs/nfs/write.c: In function nfs_page_async_flush:
fs/nfs/write.c:609:24: warning: variable mapping set but not used [-Wunused-but-set-variable]
It is not use since commit aefb623c422e ("NFS: Fix
writepage(s) error handling to not report errors twice")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Ensure we update the write result count on success, since the
RPC call itself does not do so.
Reported-by: Jan Stancek <[email protected]>
Reported-by: Naresh Kamboju <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Tested-by: Jan Stancek <[email protected]>
|
|
If we received a reply from the server with a zero length read and
no error, then that implies we are at eof.
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Avoids:
../drivers/mfd/rk808.c:771:1: warning: symbol 'rk8xx_pm_ops' \
was not declared. Should it be static?
Fixes: 5752bc4373b2 ("mfd: rk808: Mark pm functions __maybe_unused")
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
|
|
The newly added suspend/resume functions are only used if CONFIG_PM
is enabled:
drivers/mfd/rk808.c:752:12: error: 'rk8xx_resume' defined but not used [-Werror=unused-function]
drivers/mfd/rk808.c:732:12: error: 'rk8xx_suspend' defined but not used [-Werror=unused-function]
Mark them as __maybe_unused so the compiler can silently drop them
when they are not needed.
Fixes: 586c1b4125b3 ("mfd: rk808: Add RK817 and RK809 support")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
|
|
If writepage()/writepages() saw an error, but handled it without
reporting it, we should not be re-reporting that error on exit.
Signed-off-by: Trond Myklebust <[email protected]>
|
|
If the client attempts to read a page, but the read fails due to some
spurious error (e.g. an ACCESS error or a timeout, ...) then we need
to allow other processes to retry.
Also try to report errors correctly when doing a synchronous readpage.
Signed-off-by: Trond Myklebust <[email protected]>
|
|
If the mount is hard, we should ignore the 'io_maxretrans' module
parameter so that we always keep retrying.
Signed-off-by: Trond Myklebust <[email protected]>
|
|
If the connection breaks while we're waiting for a reply from the
server, then we want to immediately try to reconnect.
Fixes: ec6017d90359 ("SUNRPC fix regression in umount of a secure mount")
Signed-off-by: Trond Myklebust <[email protected]>
|
|
This reverts commit a79f194aa4879e9baad118c3f8bb2ca24dbef765.
The mechanism for aborting I/O is racy, since we are not guaranteed that
the request is asleep while we're changing both task->tk_status and
task->tk_action.
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected] # v5.1
|
|
If a connect or bind attempt returns EADDRINUSE, that means we want to
retry with a different port. It is not a fatal connection error.
Similarly, ENOBUFS is not fatal, but just indicates a memory allocation
issue. Retry after a short delay.
Signed-off-by: Trond Myklebust <[email protected]>
|
|
The pNFS/flexfiles I/O requests are sent with the SOFTCONN flag set, so
they automatically time out if the connection breaks. It should
therefore not be necessary to have the soft flag set in addition.
Fixes: 5f01d9539496 ("nfs41: create NFSv3 DS connection if specified")
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Don't handle errors in call_bind_status()/call_connect_status()
if it turns out that a previous call caused it to succeed.
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected] # v5.1+
|
|
Reported-by: Sedat Dilek <[email protected]>
Suggested-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
This updates the documentation for supporting an optional extra interrupt
cell to specify edge vs level triggered.
Signed-off-by: Mischa Jonker <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
* Some lines exceeded 80 characters.
* Clarified statement about AUX register interface
Signed-off-by: Mischa Jonker <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
This adds support for an optional extra interrupt cell to specify edge
vs level triggered. It is backward compatible with dts files with only
one cell, and will default to level-triggered in such a case.
Note that I had to make a change to idu_irq_set_affinity as well, as
this function was setting the interrupt type to "level" unconditionally,
since this was the only type supported previously.
Signed-off-by: Mischa Jonker <[email protected]>
Reviewed-by: Vineet Gupta <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
When userspace application calls ioctl(2) to configure hardware for PCM
playback substream, ALSA OXFW driver handles incoming AMDTP stream.
In this case, outgoing AMDTP stream should be handled.
This commit fixes the bug for v5.3-rc kernel.
Fixes: 4f380d007052 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
get_registers() blindly copies the memory written to by the
usb_control_msg() call even if the underlying urb failed.
This could lead to junk register values being read by the driver, since
some indirect callers of get_registers() ignore the return values. One
example is:
ocp_read_dword() ignores the return value of generic_ocp_read(), which
calls get_registers().
So, emulate PCI "Master Abort" behavior by setting the buffer to all
0xFFs when usb_control_msg() fails.
This patch is copied from the r8152 driver (v2.12.0) published by
Realtek (www.realtek.com).
Signed-off-by: Prashant Malani <[email protected]>
Acked-by: Hayes Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch addresses a conntrack cache issue with timeout policy.
Currently, we do not check if the timeout extension is set properly in the
cached conntrack entry. Thus, after packet recirculate from conntrack
action, the timeout policy is not applied properly. This patch fixes the
aforementioned issue.
Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action")
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Yi-Hung Wei <[email protected]>
Acked-by: Pravin B Shelar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When using mpls over gre/gre6 setup, rt->rt_gw4 address is not set, the
same for rt->rt_gw_family. Therefore, when rt->rt_gw_family is checked
in mpls_xmit(), neigh_xmit() call is skipped. As a result, such setup
doesn't work anymore.
This issue was found with LTP mpls03 tests.
Fixes: 1550c171935d ("ipv4: Prepare rtable for IPv6 gateway")
Signed-off-by: Alexey Kodanev <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Donald reported this sequence:
ip next add id 1 blackhole
ip next add id 2 blackhole
ip ro add 1.1.1.1/32 nhid 1
ip ro add 1.1.1.2/32 nhid 2
would cause a crash. Backtrace is:
[ 151.302790] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 151.304043] CPU: 1 PID: 277 Comm: ip Not tainted 5.3.0-rc5+ #37
[ 151.305078] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
[ 151.306526] RIP: 0010:fib_add_nexthop+0x8b/0x2aa
[ 151.307343] Code: 35 f7 81 48 8d 14 01 c7 02 f1 f1 f1 f1 c7 42 04 01 f4 f4 f4 48 89 f2 48 c1 ea 03 65 48 8b 0c 25 28 00 00 00 48 89 4d d0 31 c9 <80> 3c 02 00 74 08 48 89 f7 e8 1a e8 53 ff be 08 00 00 00 4c 89 e7
[ 151.310549] RSP: 0018:ffff888116c27340 EFLAGS: 00010246
[ 151.311469] RAX: dffffc0000000000 RBX: ffff8881154ece00 RCX: 0000000000000000
[ 151.312713] RDX: 0000000000000004 RSI: 0000000000000020 RDI: ffff888115649b40
[ 151.313968] RBP: ffff888116c273d8 R08: ffffed10221e3757 R09: ffff888110f1bab8
[ 151.315212] R10: 0000000000000001 R11: ffff888110f1bab3 R12: ffff888115649b40
[ 151.316456] R13: 0000000000000020 R14: ffff888116c273b0 R15: ffff888115649b40
[ 151.317707] FS: 00007f60b4d8d800(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
[ 151.319113] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 151.320119] CR2: 0000555671ffdc00 CR3: 00000001136ba005 CR4: 0000000000020ee0
[ 151.321367] Call Trace:
[ 151.321820] ? fib_nexthop_info+0x635/0x635
[ 151.322572] fib_dump_info+0xaa4/0xde0
[ 151.323247] ? fib_create_info+0x2431/0x2431
[ 151.324008] ? napi_alloc_frag+0x2a/0x2a
[ 151.324711] rtmsg_fib+0x2c4/0x3be
[ 151.325339] fib_table_insert+0xe2f/0xeee
...
fib_dump_info incorrectly has nhs = 0 for blackhole nexthops, so it
believes the nexthop object is a multipath group (nhs != 1) and ends
up down the nexthop_mpath_fill_node() path which is wrong for a
blackhole.
The blackhole check in nexthop_num_path is leftover from early days
of the blackhole implementation which did not initialize the device.
In the end the design was simpler (fewer special case checks) to set
the device to loopback in nh_info, so the check in nexthop_num_path
should have been removed.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Reported-by: Donald Sharp <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
Pull auxdisplay cleanup from Miguel Ojeda:
"Make ht16k33_fb_fix and ht16k33_fb_var constant (Nishka Dasgupta)"
* tag 'auxdisplay-for-linus-v5.3-rc7' of git://github.com/ojeda/linux:
auxdisplay: ht16k33: Make ht16k33_fb_fix and ht16k33_fb_var constant
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fix from Richard Weinberger:
"Fix time travel mode"
* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: fix time travel mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBIFS and JFFS2 fixes from Richard Weinberger:
"UBIFS:
- Don't block too long in writeback_inodes_sb()
- Fix for a possible overrun of the log head
- Fix double unlock in orphan_delete()
JFFS2:
- Remove C++ style from UAPI header and unbreak picky toolchains"
* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Limit the number of pages in shrink_liability
ubifs: Correctly initialize c->min_log_bytes
ubifs: Fix double unlock around orphan_delete()
jffs2: Remove C++ style comments from uapi header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A few fixes for x86:
- Fix a boot regression caused by the recent bootparam sanitizing
change, which escaped the attention of all people who reviewed that
code.
- Address a boot problem on machines with broken E820 tables caused
by an underflow which ended up placing the trampoline start at
physical address 0.
- Handle machines which do not advertise a legacy timer of any form,
but need calibration of the local APIC timer gracefully by making
the calibration routine independent from the tick interrupt. Marked
for stable as well as there seems to be quite some new laptops
rolled out which expose this.
- Clear the RDRAND CPUID bit on AMD family 15h and 16h CPUs which are
affected by broken firmware which does not initialize RDRAND
correctly after resume. Add a command line parameter to override
this for machine which either do not use suspend/resume or have a
fixed BIOS. Unfortunately there is no way to detect this on boot,
so the only safe decision is to turn it off by default.
- Prevent RFLAGS from being clobbers in CALL_NOSPEC on 32bit which
caused fast KVM instruction emulation to break.
- Explain the Intel CPU model naming convention so that the repeating
discussions come to an end"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Don't clobber RFLAGS during CALL_NOSPEC on i386
x86/boot: Fix boot regression caused by bootparam sanitizing
x86/CPU/AMD: Clear RDRAND CPUID bit on AMD family 15h/16h
x86/boot/compressed/64: Fix boot on machines with broken E820 table
x86/apic: Handle missing global clockevent gracefully
x86/cpu: Explain Intel model naming convention
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping fix from Thomas Gleixner:
"A single fix for a regression caused by the generic VDSO
implementation where a math overflow causes CLOCK_BOOTTIME to become a
random number generator"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping/vsyscall: Prevent math overflow in BOOTTIME update
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"Handle the worker management in situations where a task is scheduled
out on a PI lock contention correctly and schedule a new worker if
possible"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Schedule new worker even if PI-blocked
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two small fixes for kprobes and perf:
- Prevent a deadlock in kprobe_optimizer() causes by reverse lock
ordering
- Fix a comment typo"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Fix potential deadlock in kprobe_optimizer()
perf/x86: Fix typo in comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a imbalanced kobject operation in the irq decriptor
code which was unearthed by the new warnings in the kobject code"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Properly pair kobject_del() with kobject_add()
|