aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-10-23riscv: Fix implicit declaration of 'page_to_section'Kefeng Wang1-4/+1
With CONFIG_SPARSEMEM and !CONFIG_SPARSEMEM_VMEMMAP, arch/riscv/include/asm/pgtable.h: In function ‘mk_pte’: include/asm-generic/memory_model.h:64:14: error: implicit declaration of function ‘page_to_section’; did you mean ‘present_section’? [-Werror=implicit-function-declaration] int __sec = page_to_section(__pg); \ ^~~~~~~~~~~~~~~ Fixed by changing mk_pte() from inline function to macro. Cc: Logan Gunthorpe <[email protected]> Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: Kefeng Wang <[email protected]> [[email protected]: fixed checkpatch errors] Signed-off-by: Paul Walmsley <[email protected]>
2019-10-23riscv: fix fs/proc/kcore.c compilation with sparsemem enabledDavid Abdurachmanov1-2/+0
Failed to compile Fedora/RISCV kernel (5.4-rc3+) with sparsemem enabled: fs/proc/kcore.c: In function 'read_kcore': fs/proc/kcore.c:510:8: error: implicit declaration of function 'kern_addr_valid'; did you mean 'virt_addr_valid'? [-Werror=implicit-function-declaration] 510 | if (kern_addr_valid(start)) { | ^~~~~~~~~~~~~~~ | virt_addr_valid Looking at other architectures I don't see kern_addr_valid being guarded by CONFIG_FLATMEM. Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: David Abdurachmanov <[email protected]> Tested-by: David Abdurachmanov <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Signed-off-by: Paul Walmsley <[email protected]>
2019-10-23of: reserved_mem: add missing of_node_put() for proper ref-countingChris Goldsworthy1-1/+3
Commit d698a388146c ("of: reserved-memory: ignore disabled memory-region nodes") added an early return in of_reserved_mem_device_init_by_idx(), but didn't call of_node_put() on a device_node whose ref-count was incremented in the call to of_parse_phandle() preceding the early exit. Fixes: d698a388146c ("of: reserved-memory: ignore disabled memory-region nodes") Signed-off-by: Chris Goldsworthy <[email protected]> Cc: [email protected] Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2019-10-23Merge tag 'trace-v5.4-rc3-3' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two minor fixes: - A race in perf trace initialization (missing mutexes) - Minor fix to represent gfp_t in synthetic events as properly signed" * tag 'trace-v5.4-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix race in perf_trace_buf initialization tracing: Fix "gfp_t" format for synthetic events
2019-10-23of: unittest: fix memory leak in unittest_data_addNavid Emamdoost1-0/+1
In unittest_data_add, a copy buffer is created via kmemdup. This buffer is leaked if of_fdt_unflatten_tree fails. The release for the unittest_data buffer is added. Fixes: b951f9dc7f25 ("Enabling OF selftest to run without machine's devicetree") Signed-off-by: Navid Emamdoost <[email protected]> Reviewed-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2019-10-23dt-bindings: riscv: Fix CPU schema errorsRob Herring1-16/+13
Fix the errors in the RiscV CPU DT schema: Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@1: 'timebase-frequency' is a required property Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible:0: 'riscv' is not one of ['sifive,rocket0', 'sifive,e5', 'sifive,e51', 'sifive,u54-mc', 'sifive,u54', 'sifive,u5'] Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible: ['riscv'] is too short Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property The DT spec allows for 'timebase-frequency' to be in 'cpu' or 'cpus' node and RiscV requires it in /cpus node, so make it disallowed in cpu nodes. Fixes: 4fd669a8c487 ("dt-bindings: riscv: convert cpu binding to json-schema") Cc: Palmer Dabbelt <[email protected]> Cc: Albert Ou <[email protected]> Cc: [email protected] Acked-by: Paul Walmsley <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2019-10-23Merge tag 'vfio-v5.4-rc5' of git://github.com/awilliam/linux-vfioLinus Torvalds1-1/+1
Pull VFIO fixlet from Alex Williamson: "Fix (false) uninitialized variable warning (Joerg Roedel)" * tag 'vfio-v5.4-rc5' of git://github.com/awilliam/linux-vfio: vfio/type1: Initialize resv_msi_base
2019-10-23Merge tag 'regulator-fix-v5.4-rc4' of ↵Linus Torvalds9-106/+100
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "There are a few core fixes here around error handling and handling if suspend mode configuration and some driver specific fixes here but the most important change is the fix to the fixed-regulator DT schema conversion introduced during the last merge window. That fixes one of the last two errors preventing successful execution of "make dt_binding_check" which will be enormously helpful for DT schema development" * tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: Fix PMIC5 BoB min voltage regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized regulator: lochnagar: Add on_off_delay for VDDCORE regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone regulator: da9062: fix suspend_enable/disable preparation dt-bindings: fixed-regulator: fix compatible enum regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OF regulator: core: make regulator_register() EPROBE_DEFER aware regulator: of: fix suspend-min/max-voltage parsing
2019-10-23RDMA/core: Check that process is still alive before sending it to the usersLeon Romanovsky2-9/+33
The PID information can disappear asynchronously because the task can be killed and moved to zombie state. In this case, PID will be zero in similar way to the kernel tasks. Recognize such situation where we are asking to return orphaned object and simply skip filling PID attribute. As part of this change, document the same scenario in counter.c code. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-23MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTBFlorian Fainelli1-2/+0
The last time Gregory and Brian did a review was sometime around 2015, since then, they have not been active for ARCH_BRCMSTB changes. Following the position of other maintainers and Harald Welte's position here: [1] http://laforge.gnumonks.org/blog/20180307-mchardy-gpl/ remove both of them. Acked-by: Brian Norris <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2019-10-23RDMA/restrack: Remove PID namespace supportLeon Romanovsky4-46/+2
IB resources are bounded to IB device and file descriptors, both entities are unaware to PID namespaces and to task lifetime. The difference in model caused to unpredictable behavior for the following scenario: 1. Create FD and context 2. Share it with ephemeral child 3. Create any object and exit that child The end result of this flow, that those newly created objects will be tracked by restrack, but won't be visible for users because task_struct associated with them already exited. The right thing is to rely on net namespace only for any filtering purposes and drop PID namespace. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-23Merge tag 'omap-for-v5.4/fixes-rc4-signed' of ↵Olof Johansson2-4/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Three fixes for omaps for v5.4-rc cycle Two regression fixes for omap3 iommu. I missed applying two omap3 related iommu pdata quirks patches earlier because the kbuild test robot produced errors on them for missing dependencies. Fix ti-sysc interconnect target module driver handling for watchdog quirk. I must have tested this earlier only with watchdog service running, but clearly it does not do what it needs to do. * tag 'omap-for-v5.4/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix watchdog quirk handling ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2019-10-23Merge tag 'sunxi-fixes-for-5.4-1' of ↵Olof Johansson5-18/+20
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A number of fixes for this release, but mostly: - A fixup for the A10 CSI DT binding merged during the 5.4-rc1 window - A fix for a dt-binding error - Addition of phy regulator delays - The PMU on the A64 was found to be non-functional, so we've dropped it for now * tag 'sunxi-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: Drop the module clock from the device tree dt-bindings: media: sun4i-csi: Drop the module clock media: dt-bindings: Fix building error for dt_binding_check arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay arm64: dts: allwinner: a64: Drop PMU node arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Link: https://lore.kernel.org/r/80085a57-c40f-4bed-a9c3-19858d87564e.lettre@localhost Signed-off-by: Olof Johansson <[email protected]>
2019-10-23posix-cpu-timers: Fix two trivial commentsYi Wang1-3/+3
Recent changes modified the function arguments of thread_group_sample_cputime() and task_cputimers_expired(), but forgot to update the comments. Fix it up. [ tglx: Changed the argument name of task_cputimers_expired() as the pointer points to an array of samples. ] Fixes: b7be4ef1365d ("posix-cpu-timers: Switch thread group sampling to array") Fixes: 001f7971433a ("posix-cpu-timers: Make expiry checks array based") Signed-off-by: Yi Wang <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-10-23timers/sched_clock: Include local timekeeping.h for missing declarationsBen Dooks (Codethink)1-0/+2
Include the timekeeping.h header to get the declaration of the sched_clock_{suspend,resume} functions. Fixes the following sparse warnings: kernel/time/sched_clock.c:275:5: warning: symbol 'sched_clock_suspend' was not declared. Should it be static? kernel/time/sched_clock.c:286:6: warning: symbol 'sched_clock_resume' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-10-23lib/vdso: Make clock_getres() POSIX compliant againThomas Gleixner1-4/+5
A recent commit removed the NULL pointer check from the clock_getres() implementation causing a test case to fault. POSIX requires an explicit NULL pointer check for clock_getres() aside of the validity check of the clock_id argument for obscure reasons. Add it back for both 32bit and 64bit. Note, this is only a partial revert of the offending commit which does not bring back the broken fallback invocation in the the 32bit compat implementations of clock_getres() and clock_gettime(). Fixes: a9446a906f52 ("lib/vdso/32: Remove inconsistent NULL pointer checks") Reported-by: Andreas Schwab <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Christophe Leroy <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-10-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds7-36/+73
:Pull ARM fixes from Russell King: - fix for alignment faults under high memory pressure - use u32 for ARM instructions in fault handler - mark functions that must always be inlined with __always_inline - fix for nommu XIP - fix ARMv7M switch to handler mode in reboot path - fix the recently introduced AMBA reset control error paths * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8926/1: v7m: remove register save to stack before svc ARM: 8914/1: NOMMU: Fix exc_ret for XIP ARM: 8908/1: add __always_inline to functions called from __get_user_check() ARM: mm: alignment: use "u32" for 32-bit instructions ARM: mm: fix alignment handler faults under memory pressure drivers/amba: fix reset control error handling
2019-10-23Merge tag 'edac_urgent_for_5.4' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "Fix ghes_edac UAF case triggered by KASAN and DEBUG_TEST_DRIVER_REMOVE. Future pending rework of the ghes_edac instances registration will do away with the single memory controller per system model and that ugly hackery there. This is a minimal fix for stable@, courtesy of James Morse" * tag 'edac_urgent_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ghes: Fix Use after free in ghes_edac remove path
2019-10-23Merge tag 'for-5.4-rc4-tag' of ↵Linus Torvalds11-57/+43
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fixes of error handling cleanup of metadata accounting with qgroups enabled - fix swapped values for qgroup tracepoints - fix race when handling full sync flag - don't start unused worker thread, functionality removed already * tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: check for the full sync flag while holding the inode lock during fsync Btrfs: fix qgroup double free after failure to reserve metadata for delalloc btrfs: tracepoints: Fix bad entry members of qgroup events btrfs: tracepoints: Fix wrong parameter order for qgroup events btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents() btrfs: don't needlessly create extent-refs kernel thread btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group() Btrfs: add missing extents release on file extent cluster relocation error
2019-10-23scripts/nsdeps: use alternative sed delimiterJessica Yu1-1/+1
When doing an out of tree build with O=, the nsdeps script constructs the absolute pathname of the module source file so that it can insert MODULE_IMPORT_NS statements in the right place. However, ${srctree} contains an unescaped path to the source tree, which, when used in a sed substitution, makes sed complain: ++ sed 's/[^ ]* *//home/jeyu/jeyu-linux\/&/g' sed: -e expression #1, char 12: unknown option to `s' The sed substitution command 's' ends prematurely with the forward slashes in the pathname, and sed errors out when it encounters the 'h', which is an invalid sed substitution option. To avoid escaping forward slashes ${srctree}, we can use '|' as an alternative delimiter for sed instead to avoid this error. Reviewed-by: Masahiro Yamada <[email protected]> Reviewed-by: Matthias Maennich <[email protected]> Tested-by: Matthias Maennich <[email protected]> Signed-off-by: Jessica Yu <[email protected]>
2019-10-23Merge branch 'opp/fixes' of ↵Rafael J. Wysocki2-15/+10
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework fixes for v5.4 from Viresh Kumar: "This contains: - Patch to revert addition of regulator enable/disable in OPP core (Marek). - Remove incorrect lockdep assert (Viresh). - Fix a kref counting issue (Viresh)." * 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Reinitialize the list_kref before adding the static OPPs again opp: core: Revert "add regulators enable and disable" opp: of: drop incorrect lockdep_assert_held()
2019-10-22fs/dax: Fix pmd vs pte conflict detectionDan Williams1-2/+3
Users reported a v5.3 performance regression and inability to establish huge page mappings. A revised version of the ndctl "dax.sh" huge page unit test identifies commit 23c84eb78375 "dax: Fix missed wakeup with PMD faults" as the source. Update get_unlocked_entry() to check for NULL entries before checking the entry order, otherwise NULL is misinterpreted as a present pte conflict. The 'order' check needs to happen before the locked check as an unlocked entry at the wrong order must fallback to lookup the correct order. Reported-by: Jeff Smits <[email protected]> Reported-by: Doug Nelson <[email protected]> Cc: <[email protected]> Fixes: 23c84eb78375 ("dax: Fix missed wakeup with PMD faults") Reviewed-by: Jan Kara <[email protected]> Cc: Jeff Moyer <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Link: https://lore.kernel.org/r/157167532455.3945484.11971474077040503994.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <[email protected]>
2019-10-23opp: Reinitialize the list_kref before adding the static OPPs againViresh Kumar1-0/+7
The list_kref reaches a count of 0 when all the static OPPs are removed, for example when dev_pm_opp_of_cpumask_remove_table() is called, though the actual OPP table may not get freed as it may still be referenced by other parts of the kernel, like from a call to dev_pm_opp_set_supported_hw(). And if we call dev_pm_opp_of_cpumask_add_table() again at this point, we must reinitialize the list_kref otherwise the kernel will hit a WARN() in kref infrastructure for incrementing a kref with value 0. Fixes: 11e1a1648298 ("opp: Don't decrement uninitialized list_kref") Reported-by: Dmitry Osipenko <[email protected]> Tested-by: Dmitry Osipenko <[email protected]> Signed-off-by: Viresh Kumar <[email protected]>
2019-10-23ALSA: hda: Add Tigerlake/Jasperlake PCI IDPan Xiuli1-0/+6
Add HD Audio Device PCI ID for the Intel Tigerlake and Jasperlake platform. Signed-off-by: Pan Xiuli <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2019-10-22IB/core: Do not notify GID change event of an unregistered deviceParav Pandit1-7/+1
When IB device is undergoing unregistration, the GID cache is always cleaned up after all clients are unregistered with the below flow. __ib_unregister_device() disable_device() ib_cache_cleanup_one() gid_table_cleanup_one() cleanup_gid_table_port() There is no use in generating a GID change event at this stage, where there is no active client of the device and device is nearly unregistered. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Parav Pandit <[email protected]> Reviewed-by: Daniel Jurgens <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22IB/mlx5: Align usage of QP1 create flags with rest of mlx5 definesMichael Guralnik3-11/+6
There is little value in keeping separate function for one flag, provide it directly like any other mlx5 define. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22IB/mlx5: Remove dead codeRan Rozenstein2-16/+0
mlx5_ib_dc_atomic_is_supported function is not used anywhere. Remove the dead code. Fixes: a60109dc9a95 ("IB/mlx5: Add support for extended atomic operations") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ran Rozenstein <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22RDMA/uverbs: Add a check for uverbs_attr_get to uverbs_copy_to_struct_or_zeroChuhong Yuan1-0/+3
All current callers for uverbs_copy_to_struct_or_zero() already check that the attribute exists, but it make sense to verify the result like the other functions do. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Chuhong Yuan <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22IB/cma: Honor traffic class from lower netdevice for RoCEParav Pandit1-9/+52
When a macvlan netdevice is used for RoCE, consider the tos->prio->tc mapping as SL using its lower netdevice. 1. If the lower netdevice is a VLAN netdevice, consider the VLAN netdevice and it's parent netdevice for mapping 2. If the lower netdevice is not a VLAN netdevice, consider tc mapping directly from the lower netdevice Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22RDMA/nldev: Provide MR statisticsErez Alfasi7-6/+95
Add RDMA nldev netlink interface for dumping MR statistics information. Output example: $ ./ibv_rc_pingpong -o -P -s 500000000 local address: LID 0x0001, QPN 0x00008a, PSN 0xf81096, GID :: $ rdma stat show mr dev mlx5_0 mrn 2 page_faults 122071 page_invalidations 0 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Erez Alfasi <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22RDMA/mlx5: Return ODP type per MRErez Alfasi7-1/+71
Provide an ODP explicit/implicit type as part of 'rdma -dd resource show mr' dump. For example: $ rdma -dd resource show mr dev mlx5_0 mrn 1 rkey 0xa99a lkey 0xa99a mrlen 50000000 pdn 9 pid 7372 comm ibv_rc_pingpong drv_odp explicit For non-ODP MRs, we won't print "drv_odp ..." at all. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Erez Alfasi <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22RDMA/nldev: Allow different fill function per resourceErez Alfasi1-21/+23
So far res_get_common_{dumpit, doit} was using the default resource fill function which was defined as part of the nldev_fill_res_entry fill_entries. Add a fill function pointer as an argument allows us to use different fill function in case we want to dump different values then 'rdma resource' flow do, but still use the same existing general resources dumping flow. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Erez Alfasi <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22IB/mlx5: Introduce ODP diagnostic countersErez Alfasi3-0/+24
Introduce ODP diagnostic counters and count the following per MR within IB/mlx5 driver: 1) Page faults: Total number of faulted pages. 2) Page invalidations: Total number of pages invalidated by the OS during all invalidation events. The translations can be no longer valid due to either non-present pages or mapping changes. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Erez Alfasi <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: add a Documentation driver-api chapter for Infiniband[email protected]2-0/+128
Add a driver-api chapter for InfiniBand interfaces. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix sw/rdmavt/ kernel-doc notation[email protected]4-19/+17
Add kernel-doc for missing function parameters. Remove excess kernel-doc descriptions. Fix expected kernel-doc formatting (use ':' instead of '-' after @funcarg). ../drivers/infiniband/sw/rdmavt/ah.c:138: warning: Excess function parameter 'udata' description in 'rvt_destroy_ah' ../drivers/infiniband/sw/rdmavt/vt.c:698: warning: Function parameter or member 'pkey_table' not described in 'rvt_init_port' ../drivers/infiniband/sw/rdmavt/cq.c:561: warning: Excess function parameter 'rdi' description in 'rvt_driver_cq_init' ../drivers/infiniband/sw/rdmavt/cq.c:575: warning: Excess function parameter 'rdi' description in 'rvt_cq_exit' ../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'qp' not described in 'rvt_add_rnr_timer' ../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'aeth' not described in 'rvt_add_rnr_timer' ../drivers/infiniband/sw/rdmavt/qp.c:2591: warning: Function parameter or member 'qp' not described in 'rvt_stop_rc_timers' ../drivers/infiniband/sw/rdmavt/qp.c:2624: warning: Function parameter or member 'qp' not described in 'rvt_del_timers_sync' ../drivers/infiniband/sw/rdmavt/qp.c:2697: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter_init' ../drivers/infiniband/sw/rdmavt/qp.c:2728: warning: Function parameter or member 'iter' not described in 'rvt_qp_iter_next' ../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'rdi' not described in 'rvt_qp_iter' ../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'v' not described in 'rvt_qp_iter' ../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix core/ kernel-doc notation[email protected]2-13/+12
Correct function parameter names (typos or renames). Add kernel-doc notation for missing function parameters. ../drivers/infiniband/core/sa_query.c:1263: warning: Function parameter or member 'gid_attr' not described in 'ib_init_ah_attr_from_path' ../drivers/infiniband/core/sa_query.c:1263: warning: Excess function parameter 'sgid_attr' description in 'ib_init_ah_attr_from_path' ../drivers/infiniband/core/device.c:145: warning: Function parameter or member 'dev' not described in 'rdma_dev_access_netns' ../drivers/infiniband/core/device.c:145: warning: Excess function parameter 'device' description in 'rdma_dev_access_netns' ../drivers/infiniband/core/device.c:1333: warning: Function parameter or member 'name' not described in 'ib_register_device' ../drivers/infiniband/core/device.c:1461: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device' ../drivers/infiniband/core/device.c:1461: warning: Excess function parameter 'device' description in 'ib_unregister_device' ../drivers/infiniband/core/device.c:1483: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_and_put' ../drivers/infiniband/core/device.c:1550: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_queued' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix ulp/iser/iser_initiator.c kernel-doc warnings[email protected]1-0/+5
Add kernel-doc notation for missing function parameters: ../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'conn' not described in 'iser_send_command' ../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'task' not described in 'iser_send_command' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'conn' not described in 'iser_send_data_out' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'task' not described in 'iser_send_data_out' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'hdr' not described in 'iser_send_data_out' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix ulp/iser/iser_verbs.c kernel-doc notation[email protected]1-22/+38
Various kernel-doc fixes: - fix typos - don't use /** for internal structs or functions - fix Return: kernel-doc formatting - add kernel-doc notation for missing function parameters ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'size' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:221: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'size' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:338: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:568: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_release' ../drivers/infiniband/ulp/iser/iser_verbs.c:603: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_terminate' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'signal' not described in 'iser_post_send' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'ib_conn' not described in 'iser_post_send' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'tx_desc' not described in 'iser_post_send' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix core/verbs.c kernel-doc notation[email protected]1-0/+2
Add missing function parameter descriptions: ../drivers/infiniband/core/verbs.c:257: warning: Function parameter or member 'flags' not described in '__ib_alloc_pd' ../drivers/infiniband/core/verbs.c:257: warning: Function parameter or member 'caller' not described in '__ib_alloc_pd' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix ulp/srpt/ib_srpt.h kernel-doc notation[email protected]1-5/+2
Fix kernel-doc warnings (typos or renames) in ib_srpt.h: ../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_guid_id' not described in 'srpt_port' ../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_gid_id' not described in 'srpt_port' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix ulp/opa_vnic/opa_vnic_internal.h kernel-doc notation[email protected]1-4/+4
Remove kernel-doc notation on 4 structs since they are internal and none of the struct fields/members are described. This removes 45 kernel-doc warnings. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix ulp/iser/iscsi_iser.h kernel-doc warnings[email protected]1-7/+11
Fix kernel-doc warnings and typos/spellos. ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'dma_addr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'cqe' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'reg_wr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'send_wr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'inv_wr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:277: warning: Function parameter or member 'cqe' not described in 'iser_rx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:296: warning: Function parameter or member 'rsp' not described in 'iser_login_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:339: warning: Function parameter or member 'reg_mem' not described in 'iser_reg_ops' ../drivers/infiniband/ulp/iser/iscsi_iser.h:399: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:413: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool' ../drivers/infiniband/ulp/iser/iscsi_iser.h:439: warning: Function parameter or member 'reg_cqe' not described in 'ib_conn' ../drivers/infiniband/ulp/iser/iscsi_iser.h:491: warning: Function parameter or member 'snd_w_inv' not described in 'iser_conn' This leaves 2 "member not described" warnings that I don't know how to fix: ../drivers/infiniband/ulp/iser/iscsi_iser.h:401: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:415: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix core/ipwm_util.h kernel-doc warnings[email protected]1-1/+4
Fix kernel-doc warnings and expected formatting. ../drivers/infiniband/core/iwpm_util.h:219: warning: Function parameter or member 'a_sockaddr' not described in 'iwpm_compare_sockaddr' ../drivers/infiniband/core/iwpm_util.h:219: warning: Function parameter or member 'b_sockaddr' not described in 'iwpm_compare_sockaddr' ../drivers/infiniband/core/iwpm_util.h:280: warning: Function parameter or member 'iwpm_pid' not described in 'iwpm_send_hello' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22infiniband: fix ulp/iser/iscsi_iser.[hc] kernel-doc notation[email protected]2-5/+5
Fix struct name in kernel-doc notation to match the struct name below it. Fix one typo (spello). Fix formatting as expected for kernel-doc notation. Fix parameter name to match the function's parameter name to eliminate a kernel-doc warning. ../drivers/infiniband/ulp/iser/iscsi_iser.c:815: warning: Function parameter or member 'non_blocking' not described in 'iscsi_iser_ep_connect' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22Merge branch 'mlx5-rd-sgl' into rdma.git for-nextJason Gunthorpe297-1810/+2646
From Yamin Friedman: ==================== This series from Yamin implements long standing "TODO" existed in rw.c. It allows the driver to specify a cut-over point where it is faster to build a lkey MR rather than do a large SGL for RDMA READ operations. mlx5 HW gets a notable performane boost by switching to MRs. ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'mlx5-rd-sgl': (3 commits) RDMA/mlx5: Add capability for max sge to get optimized performance RDMA/rw: Support threshold for registration vs scattering to local pages net/mlx5: Expose optimal performance scatter entries capability
2019-10-22RDMA/mlx5: Add capability for max sge to get optimized performanceYamin Friedman1-0/+2
Allows the IB device to provide a value of maximum scatter gather entries per RDMA READ. In certain cases it may be preferable for a device to perform UMR memory registration rather than have many scatter entries in a single RDMA READ. This provides a significant performance increase in devices capable of using different memory registration schemes based on the number of scatter gather entries. This general capability allows each device vendor to fine tune when it is better to use memory registration. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yamin Friedman <[email protected]> Reviewed-by: Or Gerlitz <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22RDMA/rw: Support threshold for registration vs scattering to local pagesYamin Friedman2-10/+17
If there are more scatter entries than the recommended limit provided by the ib device, UMR registration is used. This will provide optimal performance when performing large RDMA READs over devices that advertise the threshold capability. With ConnectX-5 running NVMeoF RDMA with FIO single QP 128KB writes: Without use of cap: 70Gb/sec With use of cap: 84Gb/sec Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yamin Friedman <[email protected]> Reviewed-by: Or Gerlitz <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-22KVM: nVMX: Don't leak L1 MMIO regions to L2Jim Mattson4-32/+55
If the "virtualize APIC accesses" VM-execution control is set in the VMCS, the APIC virtualization hardware is triggered when a page walk in VMX non-root mode terminates at a PTE wherein the address of the 4k page frame matches the APIC-access address specified in the VMCS. On hardware, the APIC-access address may be any valid 4k-aligned physical address. KVM's nVMX implementation enforces the additional constraint that the APIC-access address specified in the vmcs12 must be backed by a "struct page" in L1. If not, L0 will simply clear the "virtualize APIC accesses" VM-execution control in the vmcs02. The problem with this approach is that the L1 guest has arranged the vmcs12 EPT tables--or shadow page tables, if the "enable EPT" VM-execution control is clear in the vmcs12--so that the L2 guest physical address(es)--or L2 guest linear address(es)--that reference the L2 APIC map to the APIC-access address specified in the vmcs12. Without the "virtualize APIC accesses" VM-execution control in the vmcs02, the APIC accesses in the L2 guest will directly access the APIC-access page in L1. When there is no mapping whatsoever for the APIC-access address in L1, the L2 VM just loses the intended APIC virtualization. However, when the APIC-access address is mapped to an MMIO region in L1, the L2 guest gets direct access to the L1 MMIO device. For example, if the APIC-access address specified in the vmcs12 is 0xfee00000, then L2 gets direct access to L1's APIC. Since this vmcs12 configuration is something that KVM cannot faithfully emulate, the appropriate response is to exit to userspace with KVM_INTERNAL_ERROR_EMULATION. Fixes: fe3ef05c7572 ("KVM: nVMX: Prepare vmcs02 from vmcs01 and vmcs12") Reported-by: Dan Cross <[email protected]> Signed-off-by: Jim Mattson <[email protected]> Reviewed-by: Peter Shier <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-10-22KVM: SVM: Fix potential wrong physical id in avic_handle_ldr_updateMiaohe Lin3-8/+8
Guest physical APIC ID may not equal to vcpu->vcpu_id in some case. We may set the wrong physical id in avic_handle_ldr_update as we always use vcpu->vcpu_id. Get physical APIC ID from vAPIC page instead. Export and use kvm_xapic_id here and in avic_handle_apic_id_update as suggested by Vitaly. Signed-off-by: Miaohe Lin <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-10-22RDMA/siw: Fix SQ/RQ drain logicBernard Metzler2-42/+122
Storage ULPs (e.g. iSER & NVMeOF) use ib_drain_qp() to drain QP/CQ. Current SIW's own drain routines do not properly wait until all SQ/RQ elements are completed and reaped from the CQ. This may cause touch after free issues. New logic relies on generic __ib_drain_sq()/__ib_drain_rq() posting a final work request, which SIW immediately flushes to CQ. Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krishnamraju Eraparaju <[email protected]> Signed-off-by: Bernard Metzler <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.