| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Variable i is just being incremented and it's never used anywhere else. The
variable and the increment are redundant so remove it.
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
WLUN suspend and resume events are currently not handled by
ufshcd_print_evt_hist(). Add the missing events.
Signed-off-by: Peter Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Stanley Chu <[email protected]>
Reviewed-by: Asutosh Das <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
libiscsi tests check the support of DPO & FUA bits in usage bits of RSOC
response. This patch adds support for dynamic usage bits for each opcode.
Set support of DPO & FUA bits in usage_bits of RSOC response depending on
support DPOFUA in the backstore device.
Reviewed-by: Roman Bolshakov <[email protected]>
Reviewed-by: Konstantin Shelekhin <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
RECEIVE COPY RESULTS is an opcode from 3rd party copy command set and shall
be rejected if emulate_3pc attribute is off like EXTENDED COPY.
Reviewed-by: Roman Bolshakov <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Allow support for RSOC to be turned off via the emulate_rsoc attibute.
This is just for testing purposes.
Reviewed-by: Roman Bolshakov <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Report supported opcodes depending on a dynamic device configuration.
Reviewed-by: Roman Bolshakov <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Fill the strucures for supported opcodes and usage bits that are reported
in REPORT SUPPORTED OPERATION CODES command response.
Reviewed-by: Roman Bolshakov <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add support for REPORT SUPPORTED OPERATION CODES command according to SPC4.
Reviewed-by: Roman Bolshakov <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The following deadlock has been observed on multiple test setups:
* ufshcd_wl_suspend() is waiting for blk_execute_rq(START STOP UNIT) to
complete while ufshcd_wl_suspend() holds host_sem.
* The SCSI error handler is activated, changes the host state to
SHOST_RECOVERY, ufshcd_eh_host_reset_handler() and ufshcd_err_handler()
are called and the latter function tries to obtain host_sem.
This is a deadlock because blk_execute_rq() can't execute SCSI commands
while the host is in the SHOST_RECOVERY state and because the error handler
cannot make progress because host_sem is held by another thread.
Fix this deadlock as follows:
* Fail attempts to suspend the system while the SCSI error handler is in
progress by setting the SCMD_FAIL_IF_RECOVERING flag for START STOP UNIT
commands.
* If the system is suspending and a START STOP UNIT command times out,
handle the SCSI command timeout from inside the context of the SCSI
timeout handler instead of activating the SCSI error handler.
The runtime power management code is not affected by this deadlock since
hba->host_sem is not touched by the runtime power management functions in
the UFS driver.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Open-code scsi_execute() because a later patch will modify scmd->flags and
because scsi_execute() does not support setting scmd->flags. No
functionality is changed.
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add a new boolean variable that tracks whether the system is suspending,
suspended or resuming. This information will be used in a later commit to
fix a deadlock between the SCSI error handler and the suspend code.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Instead of only retrying the START STOP UNIT command if a unit attention is
reported, repeat it if any SCSI error is reported by the device or if the
command timed out.
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Reduce the START STOP UNIT command timeout to one second since on Android
devices a kernel panic is triggered if an attempt to suspend the system
takes more than 20 seconds. One second should be enough for the START STOP
UNIT command since this command completes in less than a millisecond for
the UFS devices I have access to.
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Convert if (ret) { ... } if (!ret) { ... } into
if (ret) { ... } else { ... }.
Reviewed-by: Bean Huo <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Although the host lock had to be held by ufshcd_clk_scaling_start_busy()
callers when that function was introduced, that is no longer the case
today. Hence remove the comment that claims that callers of this function
must hold the host lock.
Reviewed-by: Bean Huo <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The current behavior for SCSI commands submitted while error recovery is
ongoing is to retry command submission after error recovery has finished.
See also the scsi_host_in_recovery() check in scsi_host_queue_ready(). Add
support for failing SCSI commands while host recovery is in progress. This
functionality will be used to fix a deadlock in the UFS driver.
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Commit 6600593cbd93 ("block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE")
made it impossible for .eh_timed_out() implementations to call
scsi_done() without causing a crash.
Restore support for SCSI timeout handlers to call scsi_done() as follows:
* Change all .eh_timed_out() handlers as follows:
- Change the return type into enum scsi_timeout_action.
- Change BLK_EH_RESET_TIMER into SCSI_EH_RESET_TIMER.
- Change BLK_EH_DONE into SCSI_EH_NOT_HANDLED.
* In scsi_timeout(), convert the SCSI_EH_* values into BLK_EH_* values.
Reviewed-by: Lee Duncan <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.
Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.
Reviewed-by: Mike Christie <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: John Garry <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Reported-by: Adrian Hunter <[email protected]>
Fixes: 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request")
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Update lpfc version to 14.2.0.8
Signed-off-by: Justin Tee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The DUMP_MEMORY mailbox command is implemented for page A0 and A2 to
retrieve transceiver information from firmware.
The mailbox command output is then formatted to print raw data values for
userspace to parse via sysfs.
Signed-off-by: Justin Tee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When bandwidth reduces from or recovers back to 100% due to congestion
management, log the event.
Signed-off-by: Justin Tee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a
hard lockup similar to the call trace below may occur.
The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer
interrupts as expected, so change the strength of the spin lock to _irq.
Kernel panic - not syncing: Hard LOCKUP
CPU: 3 PID: 110402 Comm: cat Kdump: loaded
exception RIP: native_queued_spin_lock_slowpath+91
[IRQ stack]
native_queued_spin_lock_slowpath at ffffffffb814e30b
_raw_spin_lock at ffffffffb89a667a
lpfc_rx_monitor_record at ffffffffc0a73a36 [lpfc]
lpfc_cmf_timer at ffffffffc0abbc67 [lpfc]
__hrtimer_run_queues at ffffffffb8184250
hrtimer_interrupt at ffffffffb8184ab0
smp_apic_timer_interrupt at ffffffffb8a026ba
apic_timer_interrupt at ffffffffb8a01c4f
[End of IRQ stack]
apic_timer_interrupt at ffffffffb8a01c4f
lpfc_rx_monitor_report at ffffffffc0a73c80 [lpfc]
lpfc_rx_monitor_read at ffffffffc0addde1 [lpfc]
full_proxy_read at ffffffffb83e7fc3
vfs_read at ffffffffb833fe71
ksys_read at ffffffffb83402af
do_syscall_64 at ffffffffb800430b
entry_SYSCALL_64_after_hwframe at ffffffffb8a000ad
Signed-off-by: Justin Tee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add missed clearing of phba->sli4_hba.pc_sli4_params.cmf when CMF is turned
off.
Signed-off-by: Justin Tee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The variable page is not used in the function, so delete it.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2348
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The reset_in_progress flag was never set.
Signed-off-by: Igor Pylypiv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Andrew Konecki <[email protected]>
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The request associated with a SCSI command coming from the block layer has
a unique tag, so use that when possible for getting a slot.
Unfortunately we don't support reserved commands in the SCSI midlayer yet.
As such, SMP tasks - as an example - will not have a request associated, so
in the interim continue to manage those tags for that type of sas_task
internally.
We reserve an arbitrary 4 tags for these internal tags. Indeed, we already
decrement MVS_RSVD_SLOTS by 2 for the shost can_queue when flag
MVF_FLAG_SOC is set. This change was made in commit 20b09c2992fe ("[SCSI]
mvsas: add support for 94xx; layout change; bug fixes"), but what those 2
slots are used for is not obvious.
Also make the tag management functions static, where possible.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
All mvs_tag_init() does is zero the tag bitmap, but this is already done
with the kzalloc() call to alloc the tags, so delete this unneeded
function.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The request associated with a SCSI command coming from the block layer has
a unique tag, so use that when possible for getting a CCB.
Unfortunately we don't support reserved commands in the SCSI midlayer yet,
so in the interim continue to manage those tags internally (along with
tags for private commands).
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jack Wang <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
In commit 5a141315ed7c ("scsi: pm80xx: Increase the number of outstanding
I/O supported to 1024") the pm8001_ha->tags allocation was moved into
pm8001_init_ccb_tag(). This changed the execution order of allocation.
pm8001_tag_init() used to be called after the pm8001_ha->tags allocation
and now it is called before the allocation.
Before:
pm8001_pci_probe()
`--> pm8001_pci_alloc()
`--> pm8001_alloc()
`--> pm8001_ha->tags = kzalloc(...)
`--> pm8001_tag_init(pm8001_ha); // OK: tags are allocated
After:
pm8001_pci_probe()
`--> pm8001_pci_alloc()
| `--> pm8001_alloc()
| `--> pm8001_tag_init(pm8001_ha); // NOK: tags are not allocated
|
`--> pm8001_init_ccb_tag()
`--> pm8001_ha->tags = kzalloc(...) // today it is bitmap_zalloc()
Since pm8001_ha->tags_num is zero when pm8001_tag_init() is called it does
nothing. Tags memory is allocated with bitmap_zalloc() so there is no need
to manually clear each bit with pm8001_tag_free().
Reviewed-by: Changyuan Lyu <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
To be consistent with blk-mq, put the reserved tags in the lower region of
the tagset. Eventually we hope to get rid of all this reserved tag
management.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Use sas_task_find_rq() to lookup the request per task for its driver tag.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
blk-mq already provides a unique tag per request. Some libsas LLDDs - like
hisi_sas - already use this tag as the unique per-I/O HW tag.
Add a common function to provide the request associated with a sas_task for
all libsas LLDDs.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jack Wang <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The function transport_lba_64_ext() is defined in the target_core_sbc.c
file, but not called elsewhere, so remove this unused function.
drivers/target/target_core_sbc.c:276:34: warning: unused function 'transport_lba_64_ext'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2427
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The SAS address comparison of asd_sas_port and expander phy is open
coded. Replace it with sas_phy_match_port_addr().
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The SAS address comparison of expander phys is open coded. Replace it with
sas_phy_addr_match().
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The SAS address comparison of domain device and expander phy is open
coded. Replace it with sas_phy_match_dev_addr().
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The attached phy finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
hisi_sas_dev_found() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jack Wang <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Acked-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The attached phy finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
mvs_dev_found_notify() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jack Wang <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The attached phy id finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
pm8001_dev_found_notify() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jack Wang <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
LLDDs are all implementing their own attached phy ID finding code. Factor
it out to libsas.
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jack Wang <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
SAS address comparison is widely used in libsas. However they are all
opencoded and to avoid the line spill over 80 columns, are mostly split
into multi-lines. Introduce some helpers to prepare for some refactoring.
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
All upstream scsi_device_put() calls happen from thread context. Hence
simplify scsi_device_put() by always calling the release function
synchronously. This commit prepares for constifying the SCSI host template
by removing an assignment that clears the module pointer in the SCSI host
template.
scsi_device_dev_release_usercontext() was introduced in 2006 via
commit 65110b216895 ("[SCSI] fix wrong context bugs in SCSI").
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
scsi_device_get() may be called from atomic context, e.g. by
shost_for_each_device(). A later commit will allow put_device() to sleep
for SCSI devices. Hence remove the put_device() call from
scsi_device_get().
According to Rusty Russell's "Module Refcount and Stuff mini-FAQ", calling
module_put() from atomic context is allowed since considerable time. See
also https://lkml.org/lkml/2002/11/18/330.
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Simplify the code for incrementing the SCSI device reference count in
ufshcd_set_dev_pwr_mode(). This commit removes one scsi_device_put() call
that happens from atomic context.
Reviewed-by: Adrian Hunter <[email protected]>
Cc: Avri Altman <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Use __starget_for_each_device() instead of open-coding
starget_for_each_device(). Run the queues asynchronously instead of
synchronously.
This commit removes code that calls scsi_device_put() from atomic context.
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Instead of using scsi_host_template members to track the SCSI proc
directory entries, track these entries in a list. This changes the time
needed for looking up the proc dir pointer from O(1) into O(n). This is
considered acceptable since the number of SCSI host adapter types per host
is usually small (less than ten).
This change has been tested by attaching two USB storage devices to a qemu
host:
$ grep -aH . /proc/scsi/usb-storage/*
/proc/scsi/usb-storage/7: Host scsi7: usb-storage
/proc/scsi/usb-storage/7: Vendor: QEMU
/proc/scsi/usb-storage/7: Product: QEMU USB HARDDRIVE
/proc/scsi/usb-storage/7:Serial Number: 1-0000:00:02.1:00.0-6
/proc/scsi/usb-storage/7: Protocol: Transparent SCSI
/proc/scsi/usb-storage/7: Transport: Bulk
/proc/scsi/usb-storage/7: Quirks: SANE_SENSE
/proc/scsi/usb-storage/8: Host scsi8: usb-storage
/proc/scsi/usb-storage/8: Vendor: QEMU
/proc/scsi/usb-storage/8: Product: QEMU USB HARDDRIVE
/proc/scsi/usb-storage/8:Serial Number: 1-0000:00:02.1:00.0-7
/proc/scsi/usb-storage/8: Protocol: Transparent SCSI
/proc/scsi/usb-storage/8: Transport: Bulk
/proc/scsi/usb-storage/8: Quirks: SANE_SENSE
This commit prepares for constifying most SCSI host templates.
Reviewed-by: John Garry <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Users expect that the contents of /proc/scsi is in sync with the contents
of /sys/class/scsi_host. Hence fail host creation if creating the proc
directory fails.
Suggested-by: John Garry <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Prepare for removing the 'proc_dir' and 'present' members from the SCSI
host template. This commit does not change any functionality.
Reviewed-by: John Garry <[email protected]>
Cc: Bradley Grove <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Prepare for removing the 'proc_dir' and 'present' members from the SCSI
host template by implicitly initializing 'present' and 'emulated' in
'driver_template'.
Reviewed-by: John Garry <[email protected]>
Cc: Bradley Grove <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
In sas_ata_task_done(), for commands which complete with error we set the
SATA dev FIS status field with ATA_ERR. In ata_eh_analyze_tf() this would
be interpreted as a HSM error. Set ATA_DRDY, which will lead libata to
judge as a device error, which is a safer bet.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|