aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-04-09ALSA: hda/generic - Don't override power_filter when power_save_node is setTakashi Iwai1-1/+2
Currently the generic parser sets codec->power_filter when power_save_node flag is set. But this overrides the existing filter that has been already set by the codec driver, thus it looses some features. Instead, set the default power_filter only when it's not set yet. Signed-off-by: Takashi Iwai <[email protected]>
2015-04-09ALSA: hda/generic - Make snd_hda_gen_path_power_filter() always applicableTakashi Iwai1-0/+4
Add the check of power_save_node flag at the beginning of the function so that it skips the rest if the flag isn't set. In this way, we can call this function safely no matter whether the widget power-saving is really used or not. Signed-off-by: Takashi Iwai <[email protected]>
2015-04-09ALSA: hda/generic - Fix wrong initial power state for fixed pinsTakashi Iwai1-3/+11
When the widget power-saving is enabled, the first automute hook invocation checks through the whole pins and it also tries to synchronize the power state. However, this results in a wrong state because it calls unconditionally snd_hda_jack_detect_state(). This patch adds a check of jack detectability before the actual jack detection call. Signed-off-by: Takashi Iwai <[email protected]>
2015-04-09ALSA: hda/generic - Check power state cap at updating the widget powerTakashi Iwai1-0/+2
The new widget power-saving tries to apply the power change no matter whether the node has a power cap or not. It's bad (although most of codecs chip just ignore it). Check the capability properly beforehand. Signed-off-by: Takashi Iwai <[email protected]>
2015-04-09ALSA: hda - Always allow access for POWER_STATE verbs via regmapTakashi Iwai1-5/+5
The hdac regmap code checks whether the codec is powered on while accessing, but there must be an exception -- the verbs to control the power state. Currently HD-audio driver doesn't access them via regmap, so this patch doesn't fix any current behavior, but it's just for future. Signed-off-by: Takashi Iwai <[email protected]>
2015-04-08ALSA: hda - Work around races of power up/down with runtime PMTakashi Iwai7-25/+53
Currently, snd_hdac_power_up()/down() helpers checks whether the codec is being in pm (suspend/resume), and skips the call of runtime get/put during it. This is needed as there are lots of power up/down sequences called in the paths that are also used in the PM itself. An example is found in hda_codec.c::codec_exec_verb(), where this can power up the codec while it may be called again in its power up sequence, too. The above works in most cases, but sometimes we really want to wait for the real power up. For example, the control element get/put may want explicit power up so that the value change is assured to reach to the hardware. Using the current snd_hdac_power_up(), however, results in a race, e.g. when it's called during the runtime suspend is being performed. In the worst case, as found in patch_ca0132.c, it can even lead to the deadlock because the code assumes the power up while it was skipped due to the check above. For dealing with such cases, this patch makes snd_hdac_power_up() and _down() to two variants: with and without in_pm flag check. The version with pm flag check is named as snd_hdac_power_up_pm() while the version without pm flag check is still kept as snd_hdac_power_up(). (Just because the usage of the former is fewer.) Then finally, the patch replaces each call potentially done in PM with the new _pm() variant. In theory, we can implement a unified version -- if we can distinguish the current context whether it's in the pm path. But such an implementation is cumbersome, so leave the code like this a bit messy way for now... Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96271 Signed-off-by: Takashi Iwai <[email protected]>
2015-04-08ALSA: hda - Create AFG sysfs node at lastTakashi Iwai1-8/+8
... so that user-space can know that the whole nodes have been created. Unfortunately, this can't be implemented easily in race-free way, so it's a kind of compromise. Signed-off-by: Takashi Iwai <[email protected]>
2015-04-08ALSA: hda/realtek - Support Dell headset mode for ALC288Kailang Yang1-0/+67
Dell create new platform with ALC288 codec. This patch will enable headset mode for Dino platform. [slight code refactoring and compile fix by tiwai] Signed-off-by: Kailang Yang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-08ALSA: hda/realtek - Support headset mode for ALC286/288Kailang Yang1-0/+77
Support headset mode for ALC286 and ALC288 platforms. Signed-off-by: Kailang Yang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-08Merge branch 'for-linus' into for-nextTakashi Iwai128-652/+1318
Back merge HD-audio quirks to for-next branch, so that we can apply a couple of more quirks. Signed-off-by: Takashi Iwai <[email protected]>
2015-04-08ALSA: hda/realtek - Make more stable to get pin sense for ALC283Kailang Yang1-0/+2
Pin sense will active when power pin is wake up. Power pin will not wake up immediately during resume state. Add some delay to wait for power pin activated. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-07ALSA: hda_intel: add AZX_DCAPS_I915_POWERWELL for SKL and BSWLibin Yang1-2/+6
HDMI/DP codec on SKL/BSW is in the power well. The power well must be turned on before probing the HDMI/DP codec. This is a temporary patch, which will power on the powerwell by adding AZX_DCAPS_I915_POWERWELL for SKL and BSW. After restructuring and new flag is added, this patch will be reverted. Signed-off-by: Libin Yang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-05ALSA: emu10k1: add Audigy 5/RxMichael Gernoth1-0/+16
The Audigy 5/Rx is essentially an Audigy 4 behind a PLX PCIe- bridge with an additional TOSLINK output. Signed-off-by: Michael Gernoth <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-05ALSA: au1x00: fix error return codeJulia Lawall1-3/+9
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-05ALSA: Use const struct ac97_quirkJoe Perches7-7/+10
Use const to reduce data by ~3Kb. Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-04ALSA: hda: fix possible null dereferenceSudip Mukherjee1-3/+2
we are dereferencing pcm first then checking pcm. instead now lets put them in same if condition so that pcm is checked first. Signed-off-by: Sudip Mukherjee <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-04ALSA: usb-audio: don't try to get Benchmark DAC1 sample rateEric Wong1-2/+7
Adding this quirk allows us to avoid the noisy "cannot get freq at ep 0x1" message in dmesg output every time playback starts. This ought to affect other Benchmark DAC1 variations using the same "Microchip Technology, Inc." chip as well, but I have only tested with the "Pre" variant. Signed-off-by: Eric Wong <[email protected]> Cc: Joe Turner <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-04ALSA: hda/realtek - Support Dell headset mode for ALC256Kailang Yang1-0/+16
Dell new platform of ALC256 audio codec. Support headset mode for Dell ALC256 platform. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-04ALSA: hda - Enable widget power saving for Realtek codecsTakashi Iwai1-0/+1
Recent Realtek codecs support the finer power state control on each widget. Let's enable the new feature. Tested-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-04ALSA: hda - Sync node attributes at resume from widget power savingTakashi Iwai2-4/+14
So far we assumed that the node attributes like amp values remain during the power state transition of the node itself. While this is true for IDT/STAC codecs I've tested, but some other codecs don't seem behaving in that way. This patch implements a partial sync mechanism specific to the given widget node. Now we've merged the regmap support, and it can be easily written with regcache_sync_region(). Tested-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-04-04Merge branch 'topic/hda-regmap' into for-nextTakashi Iwai19-747/+1006
This merges the support of regmap in HD-audio infrastructure. Many in-house cache codes in HD-audio driver are relaced with the more standard regmap base now. Signed-off-by: Takashi Iwai <[email protected]>
2015-04-04ALSA: hda - Fix subsystem ID read regressionDavid Henningsson1-1/+1
A regression was introduced in 7639a06c23c7d4cda3: if AC_PAR_SUBSYSTEM_ID reads as zero, one should retry using AC_VERB_GET_SUBSYSTEM_ID. This seems to hit many codecs (my own laptop included), and causes quirks for some machines not to apply correctly. Reported-by: TienFu Chen <[email protected]> Signed-off-by: David Henningsson <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-03-29Linux 4.0-rc6Linus Torvalds1-1/+1
2015-03-29Merge tag 'armsoc-for-linus' of ↵Linus Torvalds18-85/+128
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "The latest and greatest fixes for ARM platform code. Worth pointing out are: - Lines-wise, largest is a PXA fix for dealing with interrupts on DT that was quite broken. It's still newish code so while we could have held this off, it seemed appropriate to include now - Some GPIO fixes for OMAP platforms added a few lines. This was also fixes for code recently added (this release). - Small OMAP timer fix to behave better with partially upstreamed platforms, which is quite welcome. - Allwinner fixes about operating point control, reducing overclocking in some cases for better stability. plus a handful of other smaller fixes across the map" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: juno: Fix misleading name of UART reference clock ARM: dts: sunxi: Remove overclocked/overvoltaged OPP ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting ARM: socfpga: dts: fix spi1 interrupt ARM: dts: Fix gpio interrupts for dm816x ARM: dts: dra7: remove ti,hwmod property from pcie phy ARM: OMAP: dmtimer: disable pm runtime on remove ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure ARM: OMAP2+: Fix socbus family info for AM33xx devices ARM: dts: omap3: Add missing dmas for crypto ARM: dts: rockchip: disable gmac by default in rk3288.dtsi MAINTAINERS: add rockchip regexp to the ARM/Rockchip entry ARM: pxa: fix pxa interrupts handling in DT ARM: pxa: Fix typo in zeus.c ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
2015-03-29Merge tag 'sunxi-fixes-for-4.0' of ↵Olof Johansson5-12/+21
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.0 There's a few fixes to merge for 4.0, one to add a select in the machine Kconfig option to fix a potential build failure, and two fixing cpufreq related issues. * tag 'sunxi-fixes-for-4.0' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sunxi: Remove overclocked/overvoltaged OPP ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage Signed-off-by: Olof Johansson <[email protected]>
2015-03-29Merge tag 'fixes-v4.0-rc4' of ↵Olof Johansson6-7/+53
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for the -rc cycle: - Fix a device tree based booting vs legacy booting regression for omap3 crypto hardware by adding the missing DMA channels. - Fix /sys/bus/soc/devices/soc0/family for am33xx devices. - Fix two timer issues that can cause hangs if the timer related hwmod data is missing like it often initially is for new SoCs. - Remove pcie hwmods entry from dts as that causes runtime PM to fail for the PHYs. - A paper bag type dts configuration fix for dm816x GPIO interrupts that I just noticed. This is most of the changes diffstat wise, but as it's a basic feature for connecting devices and things work otherwise, it should be fixed. * tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix gpio interrupts for dm816x ARM: dts: dra7: remove ti,hwmod property from pcie phy ARM: OMAP: dmtimer: disable pm runtime on remove ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure ARM: OMAP2+: Fix socbus family info for AM33xx devices ARM: dts: omap3: Add missing dmas for crypto Signed-off-by: Olof Johansson <[email protected]>
2015-03-29Merge tag 'socfpga_fix_for_v4.0_2' of ↵Olof Johansson1-1/+1
git://git.rocketboards.org/linux-socfpga-next into fixes Late fix for v4.0 on the SoCFPGA platform: - Fix interrupt number for SPI1 interface * tag 'socfpga_fix_for_v4.0_2' of git://git.rocketboards.org/linux-socfpga-next: ARM: socfpga: dts: fix spi1 interrupt Signed-off-by: Olof Johansson <[email protected]>
2015-03-29arm64: juno: Fix misleading name of UART reference clockDave Martin1-1/+1
The UART reference clock speed is 7273.8 kHz, not 72738 kHz. Dots aren't usually used in node names even though ePAPR permits them. However, this can easily be avoided by expressing the frequency in Hz, not kHz. This patch changes the name to refclk7273800hz, reflecting the actual clock speed. Signed-off-by: Dave Martin <[email protected]> Acked-by: Liviu Dudau <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2015-03-29Merge tag 'fixes-for-v4.0-rc5' of https://github.com/rjarzmik/linux into fixesOlof Johansson3-64/+50
arm: pxa: fixes for v4.0-rc5 There are only 2 fixes, one for the zeus board about the regulator changes, where a typo prevented the zeus board from having a working can regulator, and one regression triggered by the interrupts IRQ shift of 16 affecting all boards. * tag 'fixes-for-v4.0-rc5' of https://github.com/rjarzmik/linux: ARM: pxa: fix pxa interrupts handling in DT ARM: pxa: Fix typo in zeus.c Signed-off-by: Olof Johansson <[email protected]>
2015-03-28Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix x86 syscall exit code bug that resulted in spurious non-execution of TIF-driven user-return worklets, causing big trouble for things like KVM that rely on user notifiers for correctness of their vcpu model, causing crashes like double faults" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/entry: Check for syscall exit work with IRQs disabled
2015-03-28Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds3-9/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Two clocksource driver fixes, and an idle loop RCU warning fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock() clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errors timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop
2015-03-28Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "A single sched/rt corner case fix for RLIMIT_RTIME correctness" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix RLIMIT_RTTIME when PI-boosting to RT
2015-03-28Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Ingo Molnar: "A perf kernel side fix for a fuzzer triggered lockup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix irq_work 'tail' recursion
2015-03-28Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds2-30/+59
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "A module unload lockdep race fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix the module unload key range freeing logic
2015-03-28Merge branch 'parisc-4.0-1' of ↵Linus Torvalds2-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parsic fixes from Helge Deller: "One patch from Mikulas fixes a bug on parisc by artifically incrementing the counter in pmd_free when the kernel tries to free the preallocated pmd. Other than that we now prevent that syscalls gets added without incrementing __NR_Linux_syscalls and fix the initial pmd setup code if a default page size greater than 4k has been selected" * 'parisc-4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix pmd code to depend on PT_NLEVELS value, not on CONFIG_64BIT parisc: mm: don't count preallocated pmds parisc: Add compile-time check when adding new syscalls
2015-03-28Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-4/+5
Pull kvm ppc bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix instruction emulation KVM: PPC: Book3S HV: Endian fix for accessing VPA yield count KVM: PPC: Book3S HV: Fix spinlock/mutex ordering issue in kvmppc_set_lpcr()
2015-03-28Merge tag 'arc-4.0-fixes-part-2' of ↵Linus Torvalds1-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "We found some issues with signal handling taking down the system. I know its late, but these are important and all marked for stable. ARC signal handling related fixes uncovered during recent testing of NPTL tools" * tag 'arc-4.0-fixes-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: signal handling robustify ARC: SA_SIGINFO ucontext regs off-by-one
2015-03-28Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull selinux bugfix from James Morris. Fix broken return value. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix sel_write_enforce broken return value
2015-03-27Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2-5/+5
Pull watchdog fixes from Wim Van Sebroeck: - mtk_wdt: signedness bug in mtk_wdt_start() - imgpdc: Fix NULL pointer dereference during probe and fix the default heartbeat * git://www.linux-watchdog.org/linux-watchdog: watchdog: imgpdc: Fix default heartbeat watchdog: imgpdc: Fix probe NULL pointer dereference watchdog: mtk_wdt: signedness bug in mtk_wdt_start()
2015-03-27Merge tag 'sound-4.0-rc6' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Three trivial oneliner fixes for HD-audio. Two are device-specific quirks while one is a generic fix for recent Realtek codecs" * tag 'sound-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add one more node in the EAPD supporting candidate list ALSA: hda_intel: apply the Seperate stream_tag for Sunrise Point ALSA: hda - Add dock support for Thinkpad T450s (17aa:5036)
2015-03-27ALSA: hda - Set use_single_rw flag for regmapTakashi Iwai1-0/+1
HD-audio doesn't support the bulk access. Currently it works even without this flag as implicitly assumed, but it's safer to set explicitly. Signed-off-by: Takashi Iwai <[email protected]>
2015-03-27Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux ↵James Morris1-1/+1
into for-linus
2015-03-27watchdog: imgpdc: Fix default heartbeatJames Hogan1-3/+3
The IMG PDC watchdog driver heartbeat module parameter has no default so it is initialised to zero. This results in the following warning during probe: imgpdc-wdt 2006000.wdt: Initial timeout out of range! setting max timeout The module parameter description implies that the default value should be PDC_WDT_DEF_TIMEOUT, which isn't yet used, so initialise it to that. Also tweak the heartbeat module parameter description for consistency. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <[email protected]> Cc: Ezequiel Garcia <[email protected]> Cc: Naidu Tellapati <[email protected]> Cc: Jude Abraham <[email protected]> Cc: [email protected] Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2015-03-27watchdog: imgpdc: Fix probe NULL pointer dereferenceJames Hogan1-1/+1
The IMG PDC watchdog probe function calls pdc_wdt_stop() prior to watchdog_set_drvdata(), causing a NULL pointer dereference when pdc_wdt_stop() retrieves the struct pdc_wdt_dev pointer using watchdog_get_drvdata() and reads the register base address through it. Fix by moving the watchdog_set_drvdata() call earlier, to where various other pdc_wdt->wdt_dev fields are initialised. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <[email protected]> Cc: Ezequiel Garcia <[email protected]> Cc: Naidu Tellapati <[email protected]> Cc: Jude Abraham <[email protected]> Cc: [email protected] Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2015-03-27watchdog: mtk_wdt: signedness bug in mtk_wdt_start()Dan Carpenter1-1/+1
"ret" should be signed for the error handling to work correctly. This doesn't matter much in real life since mtk_wdt_set_timeout() always succeeds. Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2015-03-26Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-34/+35
Pull drm refcounting fixes from Dave Airlie: "Here is the complete set of i915 bug/warn/refcounting fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Fixup legacy plane->crtc link for initial fb config drm/i915: Fix atomic state when reusing the firmware fb drm/i915: Keep ring->active_list and ring->requests_list consistent drm/i915: Don't try to reference the fb in get_initial_plane_config() drm: Fixup racy refcounting in plane_force_disable
2015-03-26Merge tag 'dm-4.0-fix-2' of ↵Linus Torvalds1-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix DM core device cleanup regression -- due to a latent race that was exposed by the bdi changes that were introduced during the 4.0 merge" * tag 'dm-4.0-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix add_disk() NULL pointer due to race with free_dev()
2015-03-26Merge tag 'linux-kselftest-4.0-rc6' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan. * tag 'linux-kselftest-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Fix build failures when invoked from kselftest target
2015-03-27Merge tag 'drm-intel-fixes-2015-03-26' of ↵Dave Airlie2-19/+32
git://anongit.freedesktop.org/drm-intel into drm-fixes This should cover the final warnings in -rc5 with two more backports from our development branch (drm-intel-next-queued). They're the ones from Daniel and Damien, with references to the reports. This is on top of drm-fixes because of the dependency on the two earlier fixes not yet in Linus' tree. There's an additional regression fix from Chris. * tag 'drm-intel-fixes-2015-03-26' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fixup legacy plane->crtc link for initial fb config drm/i915: Fix atomic state when reusing the firmware fb drm/i915: Keep ring->active_list and ring->requests_list consistent
2015-03-26Merge branch 'for-linus' of ↵Linus Torvalds4-19/+62
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes for s390. The ftrace comile fix is quite large for a -rc6 release, but it would be nice to have it in 4.0" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/smp: reenable smt after resume s390/mm: limit STACK_RND_MASK for compat tasks s390/ftrace: fix compile error if CONFIG_KPROBES is disabled s390/cpum_sf: add diagnostic sampling event only if it is authorized
Powered by cgit, Gruvboxed by Blaster4385.