| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
Cirrus amps support for this laptop was added in patch:
33e5e648e631 ("ALSA: hda: cs35l41: Support additional HP Envy Models")
This patch adds fixes for wrong pincfgs, wrong DAC selection and
mute/micmute LEDs.
Signed-off-by: Anthony I Gilea <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The commit 2c15a5aee2f3 ("net/sched: Load modules via their alias")
starts loading modules via aliases and not canonical names. The new
aliases were added in commit 241a94abcf46 ("net/sched: Add module
aliases for cls_,sch_,act_ modules") via a Coccinele script.
sch_fq_pie.c is missing module.h header and thus Coccinele did not patch
it. Add the include and module alias manually, so that autoloading works
for sch_fq_pie too.
(Note: commit message in commit 241a94abcf46 ("net/sched: Add module
aliases for cls_,sch_,act_ modules") was mangled due to '#'
misinterpretation. The predicate haskernel is:
| @ haskernel @
| @@
|
| #include <linux/module.h>
|
.)
Fixes: 241a94abcf46 ("net/sched: Add module aliases for cls_,sch_,act_ modules")
Signed-off-by: Michal Koutný <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Since Xilinx-based adapters now support up to eight CAN channels, the
TX interrupt mask array must have eight elements.
Signed-off-by: Martin Jocic <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Fixes: 9b221ba452aa ("can: kvaser_pciefd: Add support for Kvaser PCIe 8xCAN")
[mkl: replace Link by Fixes tag]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
In case of hitting the file EOF, ceph_read_iter() needs to retrieve the
file size from MDS, and Fr caps aren't neccessary.
[ idryomov: fold into existing retry_op == READ_INLINE branch ]
Reported-by: Frank Hsiao <[email protected]>
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Tested-by: Frank Hsiao <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
If EOF is encountered, ceph_sync_read() return value is adjusted down
according to i_size, but the "to" iter is advanced by the actual number
of bytes read. Then, when retrying, the remainder of the range may be
skipped incorrectly.
Ensure that the "to" iter is advanced only until EOF.
[ idryomov: changelog ]
Fixes: c3d8e0b5de48 ("ceph: return the real size read when it hits EOF")
Reported-by: Frank Hsiao <[email protected]>
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Tested-by: Frank Hsiao <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
GSP should be handling this and I can see no evidence in opengpu
driver that this register should be touched.
Fixed acceleration on 2080 Ti GPUs.
Fixes: 15740541e8f0 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM")
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since the referenced commit, the xfrm_inner_extract_output() function
uses the protocol field to determine the address family. So not setting
it for IPv4 raw sockets meant that such packets couldn't be tunneled via
IPsec anymore.
IPv6 raw sockets are not affected as they already set the protocol since
9c9c9ad5fae7 ("ipv6: set skb->protocol on tcp, raw and ip6_append_data
genereated skbs").
Fixes: f4796398f21b ("xfrm: Remove inner/outer modes from output path")
Signed-off-by: Tobias Brunner <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Nicolas Dichtel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
A failure during registration of the netdev notifier was not handled at
all. A failure during netlink initialization did not unregister the netdev
notifier.
Handle failures of netdev notifier registration and netlink initialization.
Both functions should only return negative values on failure and thereby
lead to the hsr module not being loaded.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Felix Maurer <[email protected]>
Reviewed-by: Shigeru Yoshida <[email protected]>
Reviewed-by: Breno Leitao <[email protected]>
Link: https://lore.kernel.org/r/3ce097c15e3f7ace98fc7fd9bcbf299f092e63d1.1710504184.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Merge additional updates related to the Energy Model, power capping
and system-wide power management for 6.9-rc1:
- Modify the Energy Model code to bail out and complain if the unit of
power is not uW to prevent errors due to unit mismatches (Lukasz
Luba).
- Make the intel_rapl platform driver use a remove callback returning
void (Uwe Kleine-König).
- Fix typo in the suspend and interrupts document (Saravana Kannan).
* pm-em:
PM: EM: Force device drivers to provide power in uW
* pm-powercap:
powercap: intel_rapl: Convert to platform remove callback returning void
* pm-sleep:
Documentation: power: Fix typo in suspend and interrupts doc
|
|
The expression htotal * vtotal can have a zero value on
overflow. It is necessary to prevent division by zero like in
fb_var_to_videomode().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Roman Smirnov <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
Merge an ACPI documentation update for 6.9-rc1 which adds markup to
generate links from footnotes in the enumeration document.
* acpi-docs:
ACPI: docs: enumeration: Make footnotes links
|
|
If reading the ACPI _PLD port location object fails, or the port
doesn't have a _PLD ACPI object then the *pld pointer will remain
uninitialized and oops when freed.
The patch that caused this is currently in next, on its way to v6.9.
So no need to add this to stable or current 6.8 kernel.
Reported-by: Klara Modin <[email protected]>
Closes: https://lore.kernel.org/linux-usb/[email protected]/
Tested-by: Klara Modin <[email protected]>
Fixes: f3ac348e6e04 ("usb: usb-acpi: Set port connect type of not connectable ports correctly")
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
For renaming, the directory only needs to be updated once if it
is in the same directory.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
When sync or dir_sync is enabled, there is no need to sync the
parent directory's inode if only for updating its timestamp.
1. If an unexpected power failure occurs, the timestamp of the
parent directory is not updated to the storage, which has no
impact on the user.
2. The number of writes will be greatly reduced, which can not
only improve performance, but also prolong device life.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
exfat_count_ext_entries() is no longer called, remove it.
exfat_update_dir_chksum() is no longer called, remove it and
rename exfat_update_dir_chksum_with_entry_set() to it.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
Before this conversion, each dentry traversed needs to be read
from the storage device or page cache. There are at least 16
dentries in a sector. This will result in frequent page cache
searches.
After this conversion, if all directory entries in a sector are
used, the sector only needs to be read once.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
Before this conversion, in exfat_init_ext_entry(), to init
the dentries in a dentry set, the sync times is equals the
dentry number if 'dirsync' or 'sync' is enabled.
That affects not only performance but also device life.
After this conversion, only needs to be synchronized once if
'dirsync' or 'sync' is enabled.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
exfat_init_ext_entry() is an init function, it's a bit strange
to free cluster in it. And the argument 'inode' will be removed
from exfat_init_ext_entry(). So this commit changes to free the
cluster in exfat_remove_entries().
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
Before this conversion, in exfat_remove_entries(), to mark the
dentries in a dentry set as deleted, the sync times is equals
the dentry numbers if 'dirsync' or 'sync' is enabled.
That affects not only performance but also device life.
After this conversion, only needs to be synchronized once if
'dirsync' or 'sync' is enabled.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
After this conversion, if "dirsync" or "sync" is enabled, the
number of synchronized dentries in exfat_add_entry() will change
from 2 to 1.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
This helper is used to lookup empty dentry set. If there are
no enough empty dentries at the input location, this helper will
return the number of dentries that need to be skipped for the
next lookup.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
Since exfat_get_dentry_set() invokes the validate functions of
exfat_validate_entry(), it only supports getting a directory
entry set of an existing file, doesn't support getting an empty
entry set.
To remove the limitation, add this helper.
Signed-off-by: Yuezhang Mo <[email protected]>
Reviewed-by: Andy Wu <[email protected]>
Reviewed-by: Aoyama Wataru <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
|
|
acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).
Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.
Fixes: 0f4b1c7e89e6 ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7eacfd ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi <[email protected]>
Reviewed-by: Michal Kubiak <[email protected]>
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Previously, patches have been added to limit the reported count of SATA
ports for asm1064 and asm1166 SATA controllers, as those controllers do
report more ports than physically having.
While it is allowed to report more ports than physically having in CAP.NP,
it is not allowed to report more ports than physically having in the PI
(Ports Implemented) register, which is what these HBAs do.
(This is a AHCI spec violation.)
Unfortunately, it seems that the PMP implementation in these ASMedia HBAs
is also violating the AHCI and SATA-IO PMP specification.
What these HBAs do is that they do not report that they support PMP
(CAP.SPM (Supports Port Multiplier) is not set).
Instead, they have decided to add extra "virtual" ports in the PI register
that is used if a port multiplier is connected to any of the physical
ports of the HBA.
Enumerating the devices behind the PMP as specified in the AHCI and
SATA-IO specifications, by using PMP READ and PMP WRITE commands to the
physical ports of the HBA is not possible, you have to use the "virtual"
ports.
This is of course bad, because this gives us no way to detect the device
and vendor ID of the PMP actually connected to the HBA, which means that
we can not apply the proper PMP quirks for the PMP that is connected to
the HBA.
Limiting the port map will thus stop these controllers from working with
SATA Port Multipliers.
This patch reverts both patches for asm1064 and asm1166, so old behavior
is restored and SATA PMP will work again, but it will also reintroduce the
(minutes long) extra boot time for the ASMedia controllers that do not
have a PMP connected (either on the PCIe card itself, or an external PMP).
However, a longer boot time for some, is the lesser evil compared to some
other users not being able to detect their drives at all.
Fixes: 0077a504e1a4 ("ahci: asm1166: correct count of reported ports")
Fixes: 9815e3961754 ("ahci: asm1064: correct count of reported ports")
Cc: [email protected]
Reported-by: Matt <[email protected]>
Signed-off-by: Conrad Kostecki <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
[cassel: rewrote commit message]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
I "extracted" YNL C into a GitHub repo to make it easier
to use in other projects: https://github.com/linux-netdev/ynl-c
GitHub actions use Ubuntu by default, and the kernel headers
there are missing f329a0ebeaba ("genetlink: correct uAPI defines").
Add the direct include workaround for nlctrl.
Fixes: 768e044a5fd4 ("doc/netlink/specs: Add spec for nlctrl netlink family")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Jason A. Donenfeld says:
====================
wireguard fixes for 6.9-rc1
This series has four WireGuard fixes:
1) Annotate a data race that KCSAN found by using READ_ONCE/WRITE_ONCE,
which has been causing syzkaller noise.
2) Use the generic netdev tstats allocation and stats getters instead of
doing this within the driver.
3) Explicitly check a flag variable instead of an empty list in the
netlink code, to prevent a UaF situation when paging through GET
results during a remove-all SET operation.
4) Set a flag in the RISC-V CI config so the selftests continue to boot.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This option is needed to continue booting with QEMU. Recent changes that
made this optional meant that it gets unset in the test harness, and so
WireGuard CI has been broken. Fix this by simply setting this option.
Cc: [email protected]
Fixes: 496ea826d1e1 ("RISC-V: provide Kconfig & commandline options to control parsing "riscv,isa"")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The previous commit fixed a bug that led to a NULL peer->device being
dereferenced. It's actually easier and faster performance-wise to
instead get the device from ctx->wg. This semantically makes more sense
too, since ctx->wg->peer_allowedips.seq is compared with
ctx->allowedips_seq, basing them both in ctx. This also acts as a
defence in depth provision against freed peers.
Cc: [email protected]
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
If all peers are removed via wg_peer_remove_all(), rather than setting
peer_list to empty, the peer is added to a temporary list with a head on
the stack of wg_peer_remove_all(). If a netlink dump is resumed and the
cursored peer is one that has been removed via wg_peer_remove_all(), it
will iterate from that peer and then attempt to dump freed peers.
Fix this by instead checking peer->is_dead, which was explictly created
for this purpose. Also move up the device_update_lock lockdep assertion,
since reading is_dead relies on that.
It can be reproduced by a small script like:
echo "Setting config..."
ip link add dev wg0 type wireguard
wg setconf wg0 /big-config
(
while true; do
echo "Showing config..."
wg showconf wg0 > /dev/null
done
) &
sleep 4
wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n")
Resulting in:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20
Read of size 8 at addr ffff88811956ec70 by task wg/59
CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x70
print_address_description.constprop.0+0x2c/0x380
print_report+0xab/0x250
kasan_report+0xba/0xf0
__lock_acquire+0x182a/0x1b20
lock_acquire+0x191/0x4b0
down_read+0x80/0x440
get_peer+0x140/0xcb0
wg_get_device_dump+0x471/0x1130
Cc: [email protected]
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Reported-by: Lillian Berry <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core
and convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in this driver and leverage the network core
allocation instead.
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Syzkaller with KCSAN identified a data-race issue when accessing
keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE()
annotations to mark the data race as intentional.
BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll
write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0:
counter_validate drivers/net/wireguard/receive.c:321 [inline]
wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461
__napi_poll+0x60/0x3b0 net/core/dev.c:6536
napi_poll net/core/dev.c:6605 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6738
__do_softirq+0xc4/0x279 kernel/softirq.c:553
do_softirq+0x5e/0x90 kernel/softirq.c:454
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499
process_one_work kernel/workqueue.c:2633 [inline]
...
read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1:
decrypt_packet drivers/net/wireguard/receive.c:252 [inline]
wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706
worker_thread+0x525/0x730 kernel/workqueue.c:2787
...
Fixes: a9e90d9931f3 ("wireguard: noise: separate receive counter from send counter")
Reported-by: [email protected]
Signed-off-by: Nikita Zhandarovich <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
dev->state can be read in rx and tx fast paths.
netif_running() which needs dev->state is called from
- enqueue_to_backlog() [RX path]
- __dev_direct_xmit() [TX path]
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Coco Li <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
While running in nohz_full mode, a task may enqueue a timer while the
tick is stopped. However the only places where the timer wheel,
alongside the timer migration machinery's decision, may reprogram the
next event accordingly with that new timer's expiry are the idle loop or
any IRQ tail.
However neither the idle task nor an interrupt may run on the CPU if it
resumes busy work in userspace for a long while in full dynticks mode.
To solve this, the timer enqueue path raises a self-IPI that will
re-evaluate the timer wheel on its IRQ tail. This asynchronous solution
avoids potential locking inversion.
This is supposed to happen both for local and global timers but commit:
b2cf7507e186 ("timers: Always queue timers on the local CPU")
broke the global timers case with removing the ->is_idle field handling
for the global base. As a result, global timers enqueue may go unnoticed
in nohz_full.
Fix this with restoring the idle tracking of the global timer's base,
allowing self-IPIs again on enqueue time.
Fixes: b2cf7507e186 ("timers: Always queue timers on the local CPU")
Reported-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When a CPU is an idle migrator, but another CPU wakes up before it,
becomes an active migrator and handles the queue, the initial idle
migrator may end up endlessly reprogramming its clockevent, chasing ghost
timers forever such as in the following scenario:
[GRP0:0]
migrator = 0
active = 0
nextevt = T1
/ \
0 1
active idle (T1)
0) CPU 1 is idle and has a timer queued (T1), CPU 0 is active and is
the active migrator.
[GRP0:0]
migrator = NONE
active = NONE
nextevt = T1
/ \
0 1
idle idle (T1)
wakeup = T1
1) CPU 0 is now idle and is therefore the idle migrator. It has
programmed its next timer interrupt to handle T1.
[GRP0:0]
migrator = 1
active = 1
nextevt = KTIME_MAX
/ \
0 1
idle active
wakeup = T1
2) CPU 1 has woken up, it is now active and it has just handled its own
timer T1.
3) CPU 0 gets a timer interrupt to handle T1 but tmigr_handle_remote()
realize it is not the migrator anymore. So it early returns without
observing that T1 has been expired already and therefore without
updating its ->wakeup value.
4) CPU 0 goes into tmigr_cpu_new_timer() which also early returns
because it doesn't queue a timer of its own. So ->wakeup is left
unchanged and the next timer is programmed to fire now.
5) goto 3) forever
This results in timer interrupt storms in idle and also in nohz_full (as
observed in rcutorture's TREE07 scenario).
Fix this with forcing a re-evaluation of tmc->wakeup while trying
remote timer handling when the CPU isn't the migrator anymmore. The
check is inherently racy but in the worst case the CPU just races setting
the KTIME_MAX value that a remote expiry also tries to set.
Fixes: 7ee988770326 ("timers: Implement the hierarchical pull model")
Reported-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The LoongArch CRC32 hw acceleration is based on arch/mips/crypto/
crc32-mips.c. While the MIPS code supports both MIPS32 and MIPS64,
but LoongArch32 lacks the CRC instruction. As a result, the line
"len -= sizeof(u32)" is unnecessary.
Removing it can make context code style more unified and improve
code readability.
Cc: [email protected]
Reviewed-by: WANG Xuerui <[email protected]>
Suggested-by: Wentao Guan <[email protected]>
Signed-off-by: Yuli Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Commit fb24ea52f78e0d595852e ("drivers: Remove explicit invocations of
mmiowb()") remove all mmiowb() in drivers, but it says:
"NOTE: mmiowb() has only ever guaranteed ordering in conjunction with
spin_unlock(). However, pairing each mmiowb() removal in this patch with
the corresponding call to spin_unlock() is not at all trivial, so there
is a small chance that this change may regress any drivers incorrectly
relying on mmiowb() to order MMIO writes between CPUs using lock-free
synchronisation."
The mmio in radeon_ring_commit() is protected by a mutex rather than a
spinlock, but in the mutex fastpath it behaves similar to spinlock. We
can add mmiowb() calls in the radeon driver but the maintainer says he
doesn't like such a workaround, and radeon is not the only example of
mutex protected mmio.
So we should extend the mmiowb tracking system from spinlock to mutex,
and maybe other locking primitives. This is not easy and error prone, so
we solve it in the architectural code, by simply defining the __io_aw()
hook as mmiowb(). And we no longer need to override queued_spin_unlock()
so use the generic definition.
Without this, we get such an error when run 'glxgears' on weak ordering
architectures such as LoongArch:
radeon 0000:04:00.0: ring 0 stalled for more than 10324msec
radeon 0000:04:00.0: ring 3 stalled for more than 10240msec
radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000001f412 last fence id 0x000000000001f414 on ring 3)
radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000000f940 last fence id 0x000000000000f941 on ring 0)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
Link: https://lore.kernel.org/dri-devel/[email protected]/T/#t
Link: https://lore.kernel.org/linux-arch/[email protected]/T/#t
Cc: [email protected]
Signed-off-by: Huacai Chen <[email protected]>
|
|
LoongArch doesn't have cache aliases, so flush_dcache_page() is a no-op.
There is a generic implementation for this case in include/asm-generic/
cacheflush.h. So remove the superfluous flush_dcache_page() definition,
which also silences such build warnings:
In file included from crypto/scompress.c:12:
include/crypto/scatterwalk.h: In function 'scatterwalk_pagedone':
include/crypto/scatterwalk.h:76:30: warning: variable 'page' set but not used [-Wunused-but-set-variable]
76 | struct page *page;
| ^~~~
crypto/scompress.c: In function 'scomp_acomp_comp_decomp':
>> crypto/scompress.c:174:38: warning: unused variable 'dst_page' [-Wunused-variable]
174 | struct page *dst_page = sg_page(req->dst);
|
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Suggested-by: Barry Song <[email protected]>
Acked-by: Barry Song <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
These two functions are implemented in pgtable.c, and they are needed
only by the virt_to_page() macro in page.h. Having the prototypes in
pgtable.h causes a circular dependency between page.h and pgtable.h,
because the virt_to_page() macro in page.h needs pgtable.h for these
two functions, while pgtable.h needs various definitions from page.h
(e.g. pte_t and pgt_t).
Let's avoid this circular dependency by moving the function prototypes
to page.h.
Signed-off-by: Max Kellermann <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
From GCC commit 3f13154553f8546a ("df-scan: remove ad-hoc handling of
global regs in asms"), global registers will no longer be forced to add
to the def-use chain. Then current_thread_info(), current_stack_pointer
and __my_cpu_offset may be lifted out of the loop because they are no
longer treated as "volatile variables".
This optimization is still correct for the current_thread_info() and
current_stack_pointer usages because they are associated to a thread.
However it is wrong for __my_cpu_offset because it is associated to a
CPU rather than a thread: if the thread migrates to a different CPU in
the loop, __my_cpu_offset should be changed.
Change __my_cpu_offset definition to treat it as a "volatile variable",
in order to avoid such a mis-optimization.
Cc: [email protected]
Reported-by: Xiaotian Wu <[email protected]>
Reported-by: Miao Wang <[email protected]>
Signed-off-by: Xing Li <[email protected]>
Signed-off-by: Hongchen Zhang <[email protected]>
Signed-off-by: Rui Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
This allocates the VM flag needed to support the userfaultfd minor fault
functionality. See commit 7677f7fd8be7665 ("userfaultfd: add minor fault
registration mode") for more information.
Signed-off-by: Huacai Chen <[email protected]>
|
|
LoongArch has implemented the current_stack_pointer macro, so select
ARCH_HAS_CURRENT_STACK_POINTER in Kconfig. This will let it be used in
non-arch places (like HARDENED_USERCOPY).
Reviewed-by: Guo Ren <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Since free_old_xmit_skbs not only deals with skb, but also xdp frame and
subsequent added xsk, so change the name of this function to
free_old_xmit.
Signed-off-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
There are two completely similar and independent implementations. This
is inconvenient for the subsequent addition of new types. So extract a
function from this piece of code and call this function uniformly to
recover old xmit ptr.
Signed-off-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Adding cond_resched() to the command waiting loop for a better
co-operation with the scheduler. This allows to give CPU a breath to
run other task(workqueue) instead of busy looping when preemption is
not allowed on a device whose CVQ might be slow.
Signed-off-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
|
|
This patch convert rx mode setting to be done in a workqueue, this is
a must for allow to sleep when waiting for the cvq command to
response since current code is executed under addr spin lock.
Note that we need to disable and flush the workqueue during freeze,
this means the rx mode setting is lost after resuming. This is not the
bug of this patch as we never try to restore rx mode setting during
resume.
Signed-off-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
|
|
When use_dma_api and premapped are true, then the do_unmap is false.
Because the do_unmap is false, vring_unmap_extra_packed is not called by
detach_buf_packed.
if (unlikely(vq->do_unmap)) {
curr = id;
for (i = 0; i < state->num; i++) {
vring_unmap_extra_packed(vq,
&vq->packed.desc_extra[curr]);
curr = vq->packed.desc_extra[curr].next;
}
}
So the indirect desc table is not unmapped. This causes the unmap leak.
So here, we check vq->use_dma_api instead. Synchronously, dma info is
updated based on use_dma_api judgment
This bug does not occur, because no driver use the premapped with
indirect.
Fixes: b319940f83c2 ("virtio_ring: skip unmap for premapped")
Signed-off-by: Xuan Zhuo <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This commit reports whether a virtio-blk device
support cache flush command to user space
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This commit report read-only information of
virtio-blk devices to user space.
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|