aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-10-14drm/amdgpu: add timer to fence to detect scheduler lockupJunwei Zhang3-3/+61
Change-Id: I67e987db0efdca28faa80b332b75571192130d33 Signed-off-by: Junwei Zhang <[email protected]> Reviewed-by: David Zhou <[email protected]> Reviewed-by: Christian König <[email protected]>
2015-10-14drm/amdgpu: add VM CS mapping trace pointChristian König2-1/+19
Output all VM mappings a command submission uses. Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu: add option to clear VM page tables after every submitChristian König3-1/+21
This makes it much easier to find when userspace misses to send some buffers. Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu: add option to stop on VM faultChristian König4-6/+80
Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu: only print meaningful VM faultsChristian König2-4/+12
Port of radeon commit 9b7d786b900baf7c0d1a7e211570aef1cb27590f. Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu: also trace already allocated VMIDsChristian König1-1/+3
Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu: Drop unnecessary #include <linux/vga_switcheroo.h>Lukas Wunner2-2/+0
This was added to two radeon files even though they don't use any vga_switcheroo symbols, the amdgpu fork inherited them: Added to amdgpu_acpi.c by commit d7a2952f1ade ("drm/radeon: Add support for the ATIF ACPI method to the radeon driver"). Added to amdgpu_bios.c by commit 6a9ee8af344e ("vga_switcheroo: initial implementation (v15)"). Signed-off-by: Lukas Wunner <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/radeon: Drop unnecessary #include <linux/vga_switcheroo.h>Lukas Wunner3-3/+0
This was added to three files even though they don't use any vga_switcheroo symbols: Added to radeon_acpi.c by commit d7a2952f1ade ("drm/radeon: Add support for the ATIF ACPI method to the radeon driver"). Added to radeon_asic.c by commit 0a10c85129c2 ("drm/radeon: create radeon_asic.c"). Added to radeon_bios.c by commit 6a9ee8af344e ("vga_switcheroo: initial implementation (v15)"). Signed-off-by: Lukas Wunner <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu: clean up pageflip interrupt handlingAlex Deucher3-159/+51
Check to make sure we aren't touching a non-existent display controller and simplify the code. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu: rework sdma structuresAlex Deucher9-258/+245
Rework the sdma structures in the driver to consolidate all of the sdma info into a single structure and allow for asics that may have different numbers of sdma instances. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu: unpin cursor BOs on suspend and pin them again on resumeAlex Deucher1-1/+30
Everything is evicted from VRAM before suspend, so we need to make sure all BOs are unpinned and re-pinned after resume. Fixes broken mouse cursor after resume introduced by commit b9729b17. Port of radeon commit: f3cbb17bcf676a2fc6aedebe9fbebd59e550c51a Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce8: Fold set_cursor() into show_cursor()Alex Deucher1-13/+5
Port of radeon commit: 8991668ab4e26f985a8485719bce5d6d0623a644 Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce8: Clean up reference counting and pinning of the cursor BOsAlex Deucher1-37/+24
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce8 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce8 set_cursor. This fixes dce8 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0c930104462aa91344f07d002cf8248ed Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce8: Move hotspot handling out of set_cursorAlex Deucher1-19/+17
It's only needed in dce8 crtc_cursor_set2. Port of radeon commit: 2e007e611bc0a46dfed1547e0228a57f800e703d Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce8: Re-show the cursor after a modeset (v2)Alex Deucher1-24/+57
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fac636028849f3bbec80c4b77e9bfdb1d2 v2: change radeon reference in error message Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce8: Use cursor_set2 hook for enabling / disabling the HW cursorAlex Deucher1-23/+51
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a6010b46a69bcd47b723a80f92693f26d17b 3feba08d79c32777a845c3c8a4ab93092bdf6f19 Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce11: Fold set_cursor() into show_cursor()Alex Deucher1-13/+5
Port of radeon commit: 8991668ab4e26f985a8485719bce5d6d0623a644 Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce11: Clean up reference counting and pinning of the cursor BOsAlex Deucher1-37/+24
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce11 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce11 set_cursor. This fixes dce11 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0c930104462aa91344f07d002cf8248ed Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce11: Move hotspot handling out of set_cursorAlex Deucher1-19/+17
It's only needed in dce11 crtc_cursor_set2. Port of radeon commit: 2e007e611bc0a46dfed1547e0228a57f800e703d Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce11: Re-show the cursor after a modeset (v2)Alex Deucher1-24/+57
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fac636028849f3bbec80c4b77e9bfdb1d2 v2: change radeon reference in error output Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce11: Use cursor_set2 hook for enabling / disabling the HW cursorAlex Deucher1-23/+51
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a6010b46a69bcd47b723a80f92693f26d17b 3feba08d79c32777a845c3c8a4ab93092bdf6f19 Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce10: Fold set_cursor() into show_cursor()Alex Deucher1-13/+5
Port of radeon commit: 8991668ab4e26f985a8485719bce5d6d0623a644 Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce10: Clean up reference counting and pinning of the cursor BOsAlex Deucher1-37/+24
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce10 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce10 set_cursor. This fixes dce10 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0c930104462aa91344f07d002cf8248ed Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce10: Move hotspot handling out of set_cursorAlex Deucher1-19/+17
It's only needed in dce10 crtc_cursor_set2. Port of radeon commit: 2e007e611bc0a46dfed1547e0228a57f800e703d Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce10: Re-show the cursor after a modeset (v2)Alex Deucher1-24/+57
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fac636028849f3bbec80c4b77e9bfdb1d2 v2: change radeon reference in error message Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/dce10: Use cursor_set2 hook for enabling / disabling the HW cursorAlex Deucher2-23/+55
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a6010b46a69bcd47b723a80f92693f26d17b 3feba08d79c32777a845c3c8a4ab93092bdf6f19 Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/atom: add support for new div32 opcodes (v3)Alex Deucher2-2/+25
Better precision than the regular div opcode. v2: drop 64 bit divide v3: fix op handling. This actually is a 64 bit divide. Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/atom: add support for new mul32 opcodes (v2)Alex Deucher2-2/+18
Better precision than the regular mul opcode. v2: handle big endian properly. Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/atom: add support for process ds opcodeAlex Deucher1-1/+10
Just skips a data section. Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-14drm/amdgpu/atom: implement debug opcodeAlex Deucher1-1/+2
Basically a nop. Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-07drm/amdgpu: disable hw semaphores by defaultAlex Deucher1-2/+2
These are buggy on some asics and not really used anymore now that the GPU schedular is enabled. Change-Id: I67182b409d64de308392a15d1a0a15018071dc0b Signed-off-by: Alex Deucher <[email protected]>
2015-10-07drm/amdgpu: enable scheduler by defaultChunming Zhou1-2/+2
Change-Id: Idce64f63e8422324996fc5d583d0bc9a5ac60d0c Signed-off-by: Chunming Zhou <[email protected]> Reviewed-by: Jammy Zhou <[email protected]> Reviewed-by: Christian König <[email protected]>
2015-10-07drm/amdgpu: add TOPDOWN flag to the whole vramChunming Zhou1-0/+2
need to decrease visible vram usage by default. Signed-off-by: Chunming Zhou <[email protected]> Reviewed-by: monk.liu <[email protected]> Reviewed-by: Christian König <[email protected]>
2015-10-07drm/amdgpu: add vram usage into debugfsChunming Zhou1-0/+5
Signed-off-by: Chunming Zhou <[email protected]> Reviewed-by: Jammy Zhou <[email protected]> Reviewed-by: Christian König <[email protected]>
2015-10-07drm/amdgpu: split gfx8 gpu init into sw and hw partsAlex Deucher1-190/+197
Calculate the driver state in sw_init and program the registers in hw init. Acked-by: Leo Liu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-02drm/radeon: remove volatile qualifierGrazvydas Ignotas1-3/+3
There doesn't seem to be any need to have 'ib' volatile, the code is not even consistent with it and some places already miss it. As it is now it's just making gcc produce worse code. If there are special requirements for that memory, then proper primitives like memory barriers or accessor functions should be used, but it doesn't look like that is needed here. While at it, change the type to match the one in radeon_ib structure. Reviewed-by: Dave Airlie <[email protected]> Signed-off-by: Grazvydas Ignotas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-02drm/radeon: refactor register check loopGrazvydas Ignotas1-6/+4
After this patch the register check loop does the same thing as before, except that now gcc does better job optimizing it: it now sees that end_reg was already checked against PACKET3_SET_CONTEXT_REG_END and can optimize REG_SAFE_BM_SIZE comparison out of evergreen_is_safe_reg() as (PACKET3_SET_CONTEXT_REG_END >> 7) < REG_SAFE_BM_SIZE. Reviewed-by: Dave Airlie <[email protected]> Signed-off-by: Grazvydas Ignotas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-02drm/radeon: split evergreen_cs_check_regGrazvydas Ignotas1-22/+27
evergreen_cs_check_reg() is a large function and gcc doesn't want to inline it. It has a quick check for reg_safe_bm[] to see if register needs special handling, which often results in early exit. However because the function is large, it has a long prologue/epilogue to save/restore all the callee-save registers which according to perf is taking significant amount of time. To avoid this, we can reuse evergreen_is_safe_reg() to do the early check directly in register loop. Reviewed-by: Dave Airlie <[email protected]> Signed-off-by: Grazvydas Ignotas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-02drm/radeon: simplify register checkerGrazvydas Ignotas1-31/+18
To avoid having to distinguish between CAYMAN or older on every register check, place a pointer in evergreen_cs_track and use it unconditionally. Also make use of the fact that both reg_safe_bm[] arrays are of the same length to remove another CAYMAN check. Reviewed-by: Dave Airlie <[email protected]> Signed-off-by: Grazvydas Ignotas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-02drm/amdgpu: Spell vga_switcheroo consistentlyLukas Wunner3-3/+3
Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: Lukas Wunner <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-02drm/radeon: Spell vga_switcheroo consistentlyLukas Wunner3-3/+3
Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: Lukas Wunner <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-10-02Merge tag 'drm-intel-next-2015-09-11' of ↵Dave Airlie50-1308/+4888
git://anongit.freedesktop.org/drm-intel into drm-next - initialize backlight from VBT as fallback (Jani) - hpd A support from Ville - various atomic polish all over (mostly from Maarten) - first parts of virtualize gpu guest support on bdw from Zhiyuan Lv - GuC fixes from Alex - polish for the chv clocks code (Ville) - various things all over, as usual * tag 'drm-intel-next-2015-09-11' of git://anongit.freedesktop.org/drm-intel: (145 commits) drm/i915: Update DRIVER_DATE to 20150911 drm/i915: Remove one very outdated comment drm/i915: Use crtc->state for duplication. drm/i915: Do not handle a null plane state. drm/i915: Remove legacy plane updates for cursor and sprite planes. drm/i915: Use atomic state when changing cursor visibility. drm/i915: Use the atomic state in intel_update_primary_planes. drm/i915: Use the plane state in intel_crtc_info. drm/i915: Use atomic plane state in the primary plane update. drm/i915: add attached connector to hdmi container drm/i915: don't hard code vlv backlight frequency if unset drm/i915: initialize backlight max from VBT drm/i915: use pch backlight override on hsw too drm/i915/bxt: Clean up bxt_init_clock_gating drm/i915: Fix cmdparser STORE/LOAD command descriptors drm/i915: Dump pfit state as hex drm/i915: access the PP_ON_DELAYS/PP_OFF_DELAYS regs only pre GEN5 drm/i915: access the PP_CONTROL reg only pre GEN5 drm/i915: Refactor common ringbuffer allocation code drm/i915: use the yesno helper for logging ...
2015-09-30Merge tag 'topic/drm-misc-2015-09-25' of ↵Dave Airlie66-497/+1303
git://anongit.freedesktop.org/drm-intel into drm-next Another attempt at drm-misc for 4.4 ... - better atomic helpers for runtime pm drivers - atomic fbdev - dp aux i2c STATUS_UPDATE handling (for short i2c replies from the sink) - bunch of constify patches - inital kerneldoc for vga switcheroo - some vblank code cleanups from Ville and Thierry - various polish all over * tag 'topic/drm-misc-2015-09-25' of git://anongit.freedesktop.org/drm-intel: (57 commits) drm/irq: Add drm_crtc_vblank_count_and_time() drm/irq: Rename drm_crtc -> crtc drm: drm_atomic_crtc_get_property should be static drm/gma500: Remove DP_LINK_STATUS_SIZE redefinition vga_switcheroo: Set active attribute to false for audio clients drm/core: Preserve the fb id on close. drm/core: Preserve the framebuffer after removing it. drm: Use vblank timestamps to guesstimate how many vblanks were missed drm: store_vblank() is never called with NULL timestamp drm: Clean up drm_calc_vbltimestamp_from_scanoutpos() vbl_status drm: Limit the number of .get_vblank_counter() retries drm: Pass flags to drm_update_vblank_count() drm/i915: Fix vblank count variable types drm: Kill pixeldur_ns drm: Stop using linedur_ns and pixeldur_ns for vblank timestamps drm: Move timestamping constants into drm_vblank_crtc drm/fbdev: Update legacy plane->fb refcounting for atomic restore drm: fix kernel-doc warnings in drm_crtc.h vga_switcheroo: Sort headers alphabetically drm: Spell vga_switcheroo consistently ...
2015-09-27Linux 4.3-rc3Linus Torvalds1-1/+1
2015-09-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-5/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two bugfixes from Andy addressing at least some of the subtle NMI related wreckage which has been reported by Sasha Levin" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi/64: Fix a paravirt stack-clobbering bug in the NMI code x86/paravirt: Replace the paravirt nop with a bona fide empty function
2015-09-27Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-8/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomass Gleixner: "A bugfix for the atmel aic5 irq chip driver which caches the wrong data and thereby breaking resume" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/atmel-aic5: Use per chip mask caches in mask/unmask()
2015-09-27Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds4-6/+30
Pull ARM fixes from Russell King: "Just two fixes: wire up the new system calls added during the last merge window, and fix another user access site" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: alignment: fix alignment handling for uaccess changes ARM: wire up new syscalls
2015-09-27Merge tag 'armsoc-fixes' of ↵Linus Torvalds34-162/+278
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Our first real batch of fixes this release cycle. Nothing really concerning, and diffstat is a bit inflated due to some DT contents moving around on STi platforms. There's a collection of them here: - A fixup for a build breakage that hits on arm64 allmodconfig in QCOM SCM firmware drivers - MMC fixes for OMAP that had quite a bit of breakage this merge window. - Misc build/warning fixes on PXA and OMAP - A couple of minor fixes for Beagleboard X15 which is now starting to see a few more users in the wild" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver ARM: dts: fix omap2+ address translation for pbias firmware: qcom: scm: Add function stubs for ARM64 ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies ARM: pxa: balloon3: Fix build error ARM: dts: Fixup model name for HP t410 dts ARM: dts: DRA7: fix a typo in ethernet ARM: omap2plus_defconfig: make PCF857x built-in ARM: dts: Use ti,pbias compatible string for pbias ARM: OMAP5: Cleanup options for SoC only build ARM: DRA7: Select missing options for SoC only build ARM: OMAP2+: board-generic: Remove stale of_irq macros ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 ARM: dts: am335x-phycore-som: Fix mpu voltage ...
2015-09-27Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds3-19/+126
Pull CIFS fixes from Steve French: "Four fixes from testing at the recent SMB3 Plugfest including two important authentication ones (one fixes authentication problems to some popular servers when clock times differ more than two hours between systems, the other fixes Kerberos authentication for SMB3)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: fix encryption error checks on mount [SMB3] Fix sec=krb5 on smb3 mounts cifs: use server timestamp for ntlmv2 authentication disabling oplocks/leases via module parm enable_oplocks broken for SMB3
2015-09-26Merge tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux into fixesOlof Johansson4-3/+28
ARM: pxa: fixes for v4.3 These fixes are mainly regression fixes triggered by irq changes, common clock framework introduction and sound side-effect of other platforms. * tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux: ARM: pxa: balloon3: Fix build error ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding ARM: pxa: fix DFI bus lockups on startup Signed-off-by: Olof Johansson <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.