aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-04riscv: Force flat memory model with no-mmuDamien Le Moal1-0/+1
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for a nommu kernel. Since the sparsemem model does not make sense anyway for the nommu case, do not allow selecting this option to always use the flatmem model. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Anup Patel <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-04RDMA/iwcm: Fix iwcm work deallocationBernard Metzler1-1/+3
The dealloc_work_entries() function must update the work_free_list pointer while freeing its entries, since potentially called again on same list. A second iteration of the work list caused system crash. This happens, if work allocation fails during cma_iw_listen() and free_cm_id() tries to free the list again during cleanup. Fixes: 922a8e9fb2e0 ("RDMA: iWARP Connection Manager.") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Signed-off-by: Bernard Metzler <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/siw: Fix failure handling during device creationBernard Metzler1-3/+3
A failing call to ib_device_set_netdev() during device creation caused system crash due to xa_destroy of uninitialized xarray hit by device deallocation. Fixed by moving xarray initialization before potential device deallocation. Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Signed-off-by: Bernard Metzler <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missingMark Zhang1-0/+2
This fixes the kernel crash when a RDMA_NLDEV_CMD_STAT_SET command is received, but the QP number parameter is not available. iwpm_register_pid: Unable to send a nlmsg (client = 2) infiniband syz1: RDMA CMA: cma_listen_on_dev, error -98 general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 9754 Comm: syz-executor069 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nla_get_u32 include/net/netlink.h:1474 [inline] RIP: 0010:nldev_stat_set_doit+0x63c/0xb70 drivers/infiniband/core/nldev.c:1760 Code: fc 01 0f 84 58 03 00 00 e8 41 83 bf fb 4c 8b a3 58 fd ff ff 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 6d RSP: 0018:ffffc900068bf350 EFLAGS: 00010247 RAX: dffffc0000000000 RBX: ffffc900068bf728 RCX: ffffffff85b60470 RDX: 0000000000000000 RSI: ffffffff85b6047f RDI: 0000000000000004 RBP: ffffc900068bf750 R08: ffff88808c3ee140 R09: ffff8880a25e6010 R10: ffffed10144bcddc R11: ffff8880a25e6ee3 R12: 0000000000000000 R13: ffff88809acb0000 R14: ffff888092a42c80 R15: 000000009ef2e29a FS: 0000000001ff0880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4733e34000 CR3: 00000000a9b27000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline] rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc0efbc5c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004 RBP: 00000000006ca018 R08: 0000000000000008 R09: 00000000004002c8 R10: 000000000000004a R11: 0000000000000246 R12: 0000000000401c60 R13: 0000000000401cf0 R14: 0000000000000000 R15: 0000000000000000 Fixes: b389327df905 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Signed-off-by: Mark Zhang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/odp: Ensure the mm is still alive before creating an implicit childJason Gunthorpe1-5/+19
Registration of a mmu_notifier requires the caller to hold a mmget() on the mm as registration is not permitted to race with exit_mmap(). There is a BUG_ON inside the mmu_notifier to guard against this. Normally creating a umem is done against current which implicitly holds the mmget(), however an implicit ODP child is created from a pagefault work queue and is not guaranteed to have a mmget(). Call mmget() around this registration and abort faulting if the MM has gone to exit_mmap(). Before the patch below the notifier was registered when the implicit ODP parent was created, so there was no chance to register a notifier outside of current. Fixes: c571feca2dc9 ("RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/core: Fix protection fault in ib_mr_pool_destroyMaor Gottlieb3-19/+14
Fix NULL pointer dereference in the error flow of ib_create_qp_user when accessing to uninitialized list pointers - rdma_mrs and sig_mrs. The following crash from syzkaller revealed it. kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 23167 Comm: syz-executor.1 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_mr_pool_destroy+0x81/0x1f0 Code: 00 00 fc ff df 49 c1 ec 03 4d 01 fc e8 a8 ea 72 fe 41 80 3c 24 00 0f 85 62 01 00 00 48 8b 13 48 89 d6 4c 8d 6a c8 48 c1 ee 03 <42> 80 3c 3e 00 0f 85 34 01 00 00 48 8d 7a 08 4c 8b 02 48 89 fe 48 RSP: 0018:ffffc9000951f8b0 EFLAGS: 00010046 RAX: 0000000000040000 RBX: ffff88810f268038 RCX: ffffffff82c41628 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffc9000951f850 RBP: ffff88810f268020 R08: 0000000000000004 R09: fffff520012a3f0a R10: 0000000000000001 R11: fffff520012a3f0a R12: ffffed1021e4d007 R13: ffffffffffffffc8 R14: 0000000000000246 R15: dffffc0000000000 FS: 00007f54bc788700(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000116920002 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rdma_rw_cleanup_mrs+0x15/0x30 ib_destroy_qp_user+0x674/0x7d0 ib_create_qp_user+0xb01/0x11c0 create_qp+0x1517/0x2130 ib_uverbs_create_qp+0x13e/0x190 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465b49 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f54bc787c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000465b49 RDX: 0000000000000040 RSI: 0000000020000540 RDI: 0000000000000003 RBP: 00007f54bc787c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f54bc7886bc R13: 00000000004ca2ec R14: 000000000070ded0 R15: 0000000000000005 Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04IB/mlx5: Fix implicit ODP raceArtemy Kovalyov2-10/+8
Following race may occur because of the call_srcu and the placement of the synchronize_srcu vs the xa_erase. CPU0 CPU1 mlx5_ib_free_implicit_mr: destroy_unused_implicit_child_mr: xa_erase(odp_mkeys) synchronize_srcu() xa_lock(implicit_children) if (still in xarray) atomic_inc() call_srcu() xa_unlock(implicit_children) xa_erase(implicit_children): xa_lock(implicit_children) __xa_erase() xa_unlock(implicit_children) flush_workqueue() [..] free_implicit_child_mr_rcu: (via call_srcu) queue_work() WARN_ON(atomic_read()) [..] free_implicit_child_mr_work: (via wq) free_implicit_child_mr() mlx5_mr_cache_invalidate() mlx5_ib_update_xlt() <-- UMR QP fail atomic_dec() The wait_event() solves the race because it blocks until free_implicit_child_mr_work() completes. Fixes: 5256edcb98a1 ("RDMA/mlx5: Rework implicit ODP destroy") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Artemy Kovalyov <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04cgroup1: don't call release_agent when it is ""Tycho Andersen1-1/+1
Older (and maybe current) versions of systemd set release_agent to "" when shutting down, but do not set notify_on_release to 0. Since 64e90a8acb85 ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()"), we filter out such calls when the user mode helper path is "". However, when used in conjunction with an actual (i.e. non "") STATIC_USERMODEHELPER, the path is never "", so the real usermode helper will be called with argv[0] == "". Let's avoid this by not invoking the release_agent when it is "". Signed-off-by: Tycho Andersen <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2020-03-04Merge tag 'socfpga_defconfig_fix_for_v5.6' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes ARM: socfpga_defconfig: add back DEBUGFS - Add back DEBUG_FS for socfpga_defconfig * tag 'socfpga_defconfig_fix_for_v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga_defconfig: Add back DEBUG_FS Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-03-04cgroup: fix psi_show() crash on 32bit ino archsQian Cai1-3/+3
Similar to the commit d7495343228f ("cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root()"), cgroup_id(root_cgrp) does not equal to 1 on 32bit ino archs which triggers all sorts of issues with psi_show() on s390x. For example, BUG: KASAN: slab-out-of-bounds in collect_percpu_times+0x2d0/ Read of size 4 at addr 000000001e0ce000 by task read_all/3667 collect_percpu_times+0x2d0/0x798 psi_show+0x7c/0x2a8 seq_read+0x2ac/0x830 vfs_read+0x92/0x150 ksys_read+0xe2/0x188 system_call+0xd8/0x2b4 Fix it by using cgroup_ino(). Fixes: 743210386c03 ("cgroup: use cgrp->kn->id as the cgroup ID") Signed-off-by: Qian Cai <[email protected]> Acked-by: Johannes Weiner <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Cc: [email protected] # v5.5
2020-03-04dt-bindings: power: Convert domain-idle-states bindings to json-schemaUlf Hansson5-47/+76
While converting to the json-schema, let's also take the opportunity to further specify/clarify some more details about the DT binding. For example, let's define the label where to put the states nodes, set a pattern for nodename of the state nodes and finally add an example. Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <[email protected]> [robh: drop type refs from standard unit properties] Signed-off-by: Rob Herring <[email protected]>
2020-03-04dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCIUlf Hansson1-2/+2
Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-03-04dt-bindings: arm: Correct links to idle states definitionsUlf Hansson1-1/+1
The arm,idle-state DT bindings recently got converted to the json-schema, but some links are still pointing to the old, non-existing, txt file. Let's update the links to fix this. Fixes: baac82fe06db ("dt-bindings: arm: Convert arm,idle-state binding to DT schema") Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-03-04mmc: sdhci-pci-gli: Enable MSI interrupt for GL975xBen Chuang1-0/+17
Enable MSI interrupt for GL9750/GL9755. Some platforms do not support PCI INTx and devices can not work without interrupt. Like messages below: [ 4.487132] sdhci-pci 0000:01:00.0: SDHCI controller found [17a0:9755] (rev 0) [ 4.487198] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PBR2._PRT.APS2], AE_NOT_FOUND (20190816/psargs-330) [ 4.487397] ACPI Error: Aborting method \_SB.PCI0.PBR2._PRT due to previous error (AE_NOT_FOUND) (20190816/psparse-529) [ 4.487707] pcieport 0000:00:01.3: can't derive routing for PCI INT A [ 4.487709] sdhci-pci 0000:01:00.0: PCI INT A: no GSI Signed-off-by: Ben Chuang <[email protected]> Tested-by: Raul E Rangel <[email protected]> Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2020-03-04spi: spi_register_controller(): free bus id on error pathsAaro Koskinen1-17/+15
Some error paths leave the bus id allocated. As a result the IDR allocation will fail after a deferred probe. Fix by freeing the bus id always on error. Signed-off-by: Aaro Koskinen <[email protected]> Message-Id: <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2020-03-04regulator: stm32-vrefbuf: fix a possible overshoot when re-enablingFabrice Gasnier1-1/+2
There maybe an overshoot, when disabling, then re-enabling vrefbuf too quickly. VREFBUF is used by ADC/DAC on some boards. When re-enabling too quickly, an overshoot on the reference voltage make the conversions inaccurate for a short period of time. - Don't put the VREFBUF in HiZ when disabling, to force an active discharge. - Enforce a 1ms OFF/ON delay Fixes: 0cdbf481e927 ("regulator: Add support for stm32-vrefbuf") Signed-off-by: Fabrice Gasnier <[email protected]> Message-Id: <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2020-03-04drm: kirin: Revert "Fix for hikey620 display offset problem"John Stultz2-21/+0
This reverts commit ff57c6513820efe945b61863cf4a51b79f18b592. With the commit ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") we added support for handling LDI overflows by resetting the hardware. However, its been observed that when we do hit the LDI overflow condition, the irq seems to be screaming, and we do nothing but stream: [drm:ade_irq_handler [kirin_drm]] *ERROR* LDI underflow! over and over to the screen I've tried a few appraoches to avoid this, but none has yet been successful and the cure here is worse then the original disease, so revert this for now. Cc: Xinliang Liu <[email protected]> Cc: Rongrong Zou <[email protected]> Cc: Xinwei Kong <[email protected]> Cc: Chen Feng <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: dri-devel <[email protected]> Fixes: ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") Signed-off-by: John Stultz <[email protected]> Acked-by: Xinliang Liu <[email protected]> Signed-off-by: Xinliang Liu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-04ASoC: stm32: sai: manage rebind issueOlivier Moysan1-8/+10
The commit e894efef9ac7 ("ASoC: core: add support to card rebind") allows to rebind the sound card after a rebind of one of its component. With this commit, the sound card is actually rebound, but may be no more functional. The following problems have been seen with STM32 SAI driver. 1) DMA channel is not requested: With the sound card rebind the simplified call sequence is: stm32_sai_sub_probe snd_soc_register_component snd_soc_try_rebind_card snd_soc_instantiate_card devm_snd_dmaengine_pcm_register The problem occurs because the pcm must be registered, before snd_soc_instantiate_card() is called. Modify SAI driver, to change the call sequence as follows: stm32_sai_sub_probe devm_snd_dmaengine_pcm_register snd_soc_register_component snd_soc_try_rebind_card 2) DMA channel is not released: dma_release_channel() is not called when devm_dmaengine_pcm_release() is executed. This occurs because SND_DMAENGINE_PCM_DRV_NAME component, has already been released through devm_component_release(). devm_dmaengine_pcm_release() should be called before devm_component_release() to avoid this problem. Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component() explicitly from SAI driver, to have the right sequence. Signed-off-by: Olivier Moysan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2020-03-04driver core: Skip unnecessary work when device doesn't have sync_state()Saravana Kannan1-1/+3
A bunch of busy work is done for devices that don't have sync_state() support. Stop doing the busy work. Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04driver core: Add dev_has_sync_state()Saravana Kannan1-0/+11
Add an API to check if a device has sync_state support in its driver or bus. Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04driver core: Call sync_state() even if supplier has no consumersSaravana Kannan1-6/+17
The initial patch that added sync_state() support didn't handle the case where a supplier has no consumers. This was because when a device is successfully bound with a driver, only its suppliers were checked to see if they are eligible to get a sync_state(). This is not sufficient for devices that have no consumers but still need to do device state clean up. So fix this. Fixes: fc5a251d0fd7ca90 (driver core: Add sync_state driver/bus callback) Signed-off-by: Saravana Kannan <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04Merge tag 'phy-for-5.6-rc_v2' of ↵Greg Kroah-Hartman4-103/+100
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 5.6-rc *) Fix phy_get() from erroring out if device link creation failed *) Fix write timeouts in Motorola Mapphone mdm6600 PHY *) Fix Broadcom brcm-sata PHY driver to write to the correct MDIO register *) Add GMII PHY mode in supported modes of TI AM335x/437x/5xx SoCs Signed-off-by: Kishon Vijay Abraham I <[email protected]> * tag 'phy-for-5.6-rc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling phy: brcm-sata: Correct MDIO operations for 40nm platforms phy: ti: gmii-sel: do not fail in case of gmii phy: ti: gmii-sel: fix set of copy-paste errors phy: core: Fix phy_get() to not return error on link creation failure phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval
2020-03-04drm/i915/gt: Drop the timeline->mutex as we wait for retirementChris Wilson1-3/+11
As we have pinned the timeline (using tl->active_count), we can safely drop the tl->mutex as we wait for what we believe to be the final request on that timeline. This is useful for ensuring that we do not block the engine heartbeat by hogging the kernel_context's timeline on a dead GPU. References: https://gitlab.freedesktop.org/drm/intel/issues/1364 Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats") Fixes: f33a8a51602c ("drm/i915: Merge wait_for_timelines with retire_request") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 82126e596d8519baac416aee83cad938f1d23cf8) Signed-off-by: Jani Nikula <[email protected]>
2020-03-04drm/i915/perf: Reintroduce wait on OA configuration completionChris Wilson2-18/+43
We still need to wait for the initial OA configuration to happen before we enable OA report writes to the OA buffer. Reported-by: Lionel Landwerlin <[email protected]> Fixes: 15d0ace1f876 ("drm/i915/perf: execute OA configuration from command stream") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1356 Testcase: igt/perf/stream-open-close Signed-off-by: Chris Wilson <[email protected]> Cc: Lionel Landwerlin <[email protected]> Reviewed-by: Lionel Landwerlin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4b4e973d5eb89244b67d3223b60f752d0479f253) Signed-off-by: Jani Nikula <[email protected]>
2020-03-04s390/pci: Fix unexpected write combine on resourceNiklas Schnelle1-2/+2
In the initial MIO support introduced in commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") zpci_map_resource() and zpci_setup_resources() default to using the mio_wb address as the resource's start address. This means users of the mapping, which includes most drivers, will get write combining on PCI Stores. This may lead to problems when drivers expect write through behavior when not using an explicit ioremap_wc(). Cc: [email protected] Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <[email protected]> Reviewed-by: Pierre Morel <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-03-04s390/mm: fix panic in gup_fast on large pudGerald Schaefer1-0/+6
On s390 there currently is no implementation of pud_write(). That was ok as long as we had our own implementation of get_user_pages_fast() which checked for pud protection by testing the bit directly w/o using pud_write(). The other callers of pud_write() are not reachable on s390. After commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") we use the generic get_user_pages_fast(), which does call pud_write() in pud_access_permitted() for FOLL_WRITE access on a large pud. Without an s390 specific pud_write(), the generic version is called, which contains a BUG() statement to remind us that we don't have a proper implementation. This results in a kernel panic. Fix this by providing an implementation of pud_write(). Cc: <[email protected]> # 5.2+ Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Gerald Schaefer <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-03-04ARM: socfpga_defconfig: Add back DEBUG_FSDinh Nguyen1-0/+1
Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed select for DEBUG_FS but we still need it for development purposes. Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Signed-off-by: Dinh Nguyen <[email protected]>
2020-03-04usb: dwc3: gadget: Update chain bit correctly when using sg listPratham Pratap1-1/+8
If scatter-gather operation is allowed, a large USB request is split into multiple TRBs. For preparing TRBs for sg list, driver iterates over the list and creates TRB for each sg and mark the chain bit to false for the last sg. The current IOMMU driver is clubbing the list of sgs which shares a page boundary into one and giving it to USB driver. With this the number of sgs mapped it not equal to the the number of sgs passed. Because of this USB driver is not marking the chain bit to false since it couldn't iterate to the last sg. This patch addresses this issue by marking the chain bit to false if it is the last mapped sg. At a practical level, this patch resolves USB transfer stalls seen with adb on dwc3 based db845c, pixel3 and other qcom hardware after functionfs gadget added scatter-gather support around v4.20. Credit also to Anurag Kumar Vulisha <[email protected]> who implemented a very similar fix to this issue. Cc: Felipe Balbi <[email protected]> Cc: Yang Fei <[email protected]> Cc: Thinh Nguyen <[email protected]> Cc: Tejas Joglekar <[email protected]> Cc: Andrzej Pietrasiewicz <[email protected]> Cc: Jack Pham <[email protected]> Cc: Todd Kjos <[email protected]> Cc: Greg KH <[email protected]> Cc: Linux USB List <[email protected]> Cc: stable <[email protected]> #4.20+ Signed-off-by: Pratham Pratap <[email protected]> [jstultz: Slight tweak to remove sg_is_last() usage, reworked commit message, minor comment tweak] Signed-off-by: John Stultz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04usb: core: port: do error out if usb_autopm_get_interface() failsEugeniu Rosca1-2/+8
Reviewing a fresh portion of coverity defects in USB core (specifically CID 1458999), Alan Stern noted below in [1]: On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote: > A revised search finds line 997 in drivers/usb/core/hub.c and lines > 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any > other directories.) AFAICT all three of these should check the > return value, although a error message in the kernel log probably > isn't needed. Factor out the usb_port_runtime_{resume,suspend}() changes into a standalone patch to allow conflict-free porting on top of stable v3.9+. [1] https://lore.kernel.org/lkml/[email protected] Fixes: 971fcd492cebf5 ("usb: add runtime pm support for usb port device") Cc: [email protected] # v3.9+ Suggested-by: Alan Stern <[email protected]> Signed-off-by: Eugeniu Rosca <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04usb: core: hub: do error out if usb_autopm_get_interface() failsEugeniu Rosca1-1/+5
Reviewing a fresh portion of coverity defects in USB core (specifically CID 1458999), Alan Stern noted below in [1]: On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote: > A revised search finds line 997 in drivers/usb/core/hub.c and lines > 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any > other directories.) AFAICT all three of these should check the > return value, although a error message in the kernel log probably > isn't needed. Factor out the usb_remove_device() change into a standalone patch to allow conflict-free integration on top of the earliest stable branches. [1] https://lore.kernel.org/lkml/[email protected] Fixes: 253e05724f9230 ("USB: add a "remove hardware" sysfs attribute") Cc: [email protected] # v2.6.33+ Suggested-by: Alan Stern <[email protected]> Signed-off-by: Eugeniu Rosca <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04usb: core: hub: fix unhandled return by employing a void functionEugeniu Rosca1-1/+1
Address below Coverity complaint (Feb 25, 2020, 8:06 AM CET): *** CID 1458999: Error handling issues (CHECKED_RETURN) /drivers/usb/core/hub.c: 1869 in hub_probe() 1863 1864 if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) 1865 hub->quirk_check_port_auto_suspend = 1; 1866 1867 if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) { 1868 hub->quirk_disable_autosuspend = 1; >>> CID 1458999: Error handling issues (CHECKED_RETURN) >>> Calling "usb_autopm_get_interface" without checking return value (as is done elsewhere 97 out of 111 times). 1869 usb_autopm_get_interface(intf); 1870 } 1871 1872 if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) 1873 return 0; 1874 Rather than checking the return value of 'usb_autopm_get_interface()', switch to the usb_autopm_get_interface_no_resume() API, as per: On Tue, Feb 25, 2020 at 10:32:32AM -0500, Alan Stern wrote: ------ 8< ------ > This change (i.e. 'ret = usb_autopm_get_interface') is not necessary, > because the resume operation cannot fail at this point (interfaces > are always powered-up during probe). A better solution would be to > call usb_autopm_get_interface_no_resume() instead. ------ 8< ------ Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: Hardik Gajjar <[email protected]> Cc: [email protected] # v4.14+ Reported-by: [email protected] Suggested-by: Alan Stern <[email protected]> Signed-off-by: Eugeniu Rosca <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04usb: storage: Add quirk for Samsung Fit flashJim Lin1-0/+6
Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors, e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors If data access times out, driver error handling will issue a port reset. Sometimes Samsung Fit (090C:1000) flash disk will not respond to later Set Address or Get Descriptor command. Adding this quirk to limit max_sectors to 64 sectors to avoid issue occurring. Signed-off-by: Jim Lin <[email protected]> Acked-by: Alan Stern <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04usb: quirks: add NO_LPM quirk for Logitech Screen ShareDan Lazewatsky1-0/+3
LPM on the device appears to cause xHCI host controllers to claim that there isn't enough bandwidth to support additional devices. Signed-off-by: Dan Lazewatsky <[email protected]> Cc: stable <[email protected]> Signed-off-by: Gustavo Padovan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04usb: usb251xb: fix regulator probe and error handlingMarco Felsch1-4/+16
Commit 4d7201cda226 ("usb: usb251xb: add vdd supply support") didn't covered the non-DT use-case and so the regualtor_enable() call during probe will fail on those platforms. Also the commit didn't handled the error case correctly. Move devm_regulator_get() out of usb251xb_get_ofdata() to address the 1st issue. This can be done without worries because devm_regulator_get() handles the non-DT use-case too. Add devm_add_action_or_reset() to address the 2nd bug. Fixes: 4d7201cda226 ("usb: usb251xb: add vdd supply support") Signed-off-by: Marco Felsch <[email protected]> Cc: stable <[email protected]> Acked-by: Richard Leitner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04phy: allwinner: Fix GENMASK misuseRikard Falkeborn1-1/+1
Arguments are supposed to be ordered high then low. Fixes: a228890f9458 ("phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC") Signed-off-by: Rikard Falkeborn <[email protected]> Tested-by: Ondrej Jirman <[email protected]> Signed-off-by: Ondrej Jirman <[email protected]> Acked-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04usb: cdns3: gadget: toggle cycle bit before reset endpointPeter Chen1-3/+14
If there are TRBs pending during reset endpoint operation, the DMA will advance after reset operation, but it isn't expected, since the data is not yet available (For OUT, the data is not yet available). After the data is ready, there won't be any interrupt since the EP_TRADDR already points to next TRB entry and doorbell is not set. To fix it, it toggles cycle bit before reset operation, and restores it after reset, it could avoid unexpected DMA advance due to cycle bit is for software during the endpoint reset operation. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Peter Chen <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-04usb: cdns3: gadget: link trb should point to next requestPeter Chen1-1/+1
It has marked the dequeue trb as link trb, but its next segment pointer is still itself, it causes the transfer can't go on. Fix it by set its pointer as the trb address for the next request. Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation") Signed-off-by: Peter Chen <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-03drivers/of/of_mdio.c:fix of_mdiobus_register()Dajun Jin1-0/+1
When registers a phy_device successful, should terminate the loop or the phy_device would be registered in other addr. If there are multiple PHYs without reg properties, it will go wrong. Signed-off-by: Dajun Jin <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-03cxgb4: fix checks for max queues to allocateVishal Kulkarni1-22/+27
Hardware can support more than 8 queues currently limited by netif_get_num_default_rss_queues(). So, rework and fix checks for max number of queues to allocate. The checks should be based on how many are actually supported by hardware, OR the number of online cpus; whichever is lower. Fixes: 5952dde72307 ("cxgb4: set maximal number of default RSS queues") Signed-off-by: Vishal Kulkarni <[email protected]>" Signed-off-by: David S. Miller <[email protected]>
2020-03-03phylink: Improve error message when validate failedHauke Mehrtens1-1/+7
This should improve the error message when the PHY validate in the MAC driver failed. I ran into this problem multiple times that I put wrong interface values into the device tree and was searching why it is failing with -22 (-EINVAL). This should make it easier to spot the problem. Signed-off-by: Hauke Mehrtens <[email protected]> Acked-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-03net: phy: bcm63xx: fix OOPS due to missing driver nameJonas Gorski1-0/+1
719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") was a bit over-eager and also removed the second phy driver's name, resulting in a nasty OOPS on registration: [ 1.319854] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804dd50c, ra == 804dd4f0 [ 1.330859] Oops[#1]: [ 1.333138] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.22 #0 [ 1.339217] $ 0 : 00000000 00000001 87ca7f00 805c1874 [ 1.344590] $ 4 : 00000000 00000047 00585000 8701f800 [ 1.349965] $ 8 : 8701f800 804f4a5c 00000003 64726976 [ 1.355341] $12 : 00000001 00000000 00000000 00000114 [ 1.360718] $16 : 87ca7f80 00000000 00000000 80639fe4 [ 1.366093] $20 : 00000002 00000000 806441d0 80b90000 [ 1.371470] $24 : 00000000 00000000 [ 1.376847] $28 : 87c1e000 87c1fda0 80b90000 804dd4f0 [ 1.382224] Hi : d1c8f8da [ 1.385180] Lo : 5518a480 [ 1.388182] epc : 804dd50c kset_find_obj+0x3c/0x114 [ 1.393345] ra : 804dd4f0 kset_find_obj+0x20/0x114 [ 1.398530] Status: 10008703 KERNEL EXL IE [ 1.402833] Cause : 00800008 (ExcCode 02) [ 1.406952] BadVA : 00000000 [ 1.409913] PrId : 0002a075 (Broadcom BMIPS4350) [ 1.414745] Modules linked in: [ 1.417895] Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 1.426214] Stack : 87cec000 80630000 80639370 80640658 80640000 80049af4 80639fe4 8063a0d8 [ 1.434816] 8063a0d8 802ef078 00000002 00000000 806441d0 80b90000 8063a0d8 802ef114 [ 1.443417] 87cea0de 87c1fde0 00000000 804de488 87cea000 8063a0d8 8063a0d8 80334e48 [ 1.452018] 80640000 8063984c 80639bf4 00000000 8065de48 00000001 8063a0d8 80334ed0 [ 1.460620] 806441d0 80b90000 80b90000 802ef164 8065dd70 80620000 80b90000 8065de58 [ 1.469222] ... [ 1.471734] Call Trace: [ 1.474255] [<804dd50c>] kset_find_obj+0x3c/0x114 [ 1.479141] [<802ef078>] driver_find+0x1c/0x44 [ 1.483665] [<802ef114>] driver_register+0x74/0x148 [ 1.488719] [<80334e48>] phy_driver_register+0x9c/0xd0 [ 1.493968] [<80334ed0>] phy_drivers_register+0x54/0xe8 [ 1.499345] [<8001061c>] do_one_initcall+0x7c/0x1f4 [ 1.504374] [<80644ed8>] kernel_init_freeable+0x1d4/0x2b4 [ 1.509940] [<804f4e24>] kernel_init+0x10/0xf8 [ 1.514502] [<80018e68>] ret_from_kernel_thread+0x14/0x1c [ 1.520040] Code: 1060000c 02202025 90650000 <90810000> 24630001 14250004 24840001 14a0fffb 90650000 [ 1.530061] [ 1.531698] ---[ end trace d52f1717cd29bdc8 ]--- Fix it by readding the name. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Signed-off-by: Jonas Gorski <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-03devlink: remove trigger command from devlink-region.rstJacob Keller1-3/+0
The devlink trigger command does not exist. While rewriting the documentation for devlink into the reStructuredText format, documentation for the trigger command was accidentally merged in. This occurred because the author was also working on a potential extension to devlink regions which included this trigger command, and accidentally squashed the documentation incorrectly. Further review eventually settled on using the previously unused "new" command instead of creating a new trigger command. Fix this by removing mention of the trigger command from the documentation. Fixes: 0b0f945f5458 ("devlink: add a file documenting devlink regions", 2020-01-10) Noticed-by: Jiri Pirko <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-04netfilter: nft_tunnel: add missing attribute validation for tunnelsJakub Kicinski1-0/+2
Add missing attribute validation for tunnel source and destination ports to the netlink policy. Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support") Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-04netfilter: nft_payload: add missing attribute validation for payload csum flagsJakub Kicinski1-0/+1
Add missing attribute validation for NFTA_PAYLOAD_CSUM_FLAGS to the netlink policy. Fixes: 1814096980bb ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields") Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-04netfilter: cthelper: add missing attribute validation for cthelperJakub Kicinski1-0/+2
Add missing attribute validation for cthelper to the netlink policy. Fixes: 12f7a505331e ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-04netfilter: nf_tables: free flowtable hooks on hook register errorFlorian Westphal1-1/+6
If hook registration fails, the hooks allocated via nft_netdev_hook_alloc need to be freed. We can't change the goto label to 'goto 5' -- while it does fix the memleak it does cause a warning splat from the netfilter core (the hooks were not registered). Fixes: 3f0465a9ef02 ("netfilter: nf_tables: dynamically allocate hooks per net_device in flowtables") Reported-by: [email protected] Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-04netfilter: x_tables: xt_mttg_seq_next should increase position indexVasily Averin1-3/+3
If .next function does not change position index, following .show function will repeat output related to current position index. Without patch: # dd if=/proc/net/ip_tables_matches # original file output conntrack conntrack conntrack recent recent icmp udplite udp tcp 0+1 records in 0+1 records out 65 bytes copied, 5.4074e-05 s, 1.2 MB/s # dd if=/proc/net/ip_tables_matches bs=62 skip=1 dd: /proc/net/ip_tables_matches: cannot skip to specified offset cp <<< end of last line tcp <<< and then unexpected whole last line once again 0+1 records in 0+1 records out 7 bytes copied, 0.000102447 s, 68.3 kB/s Cc: [email protected] Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-04netfilter: xt_recent: recent_seq_next should increase position indexVasily Averin1-1/+1
If .next function does not change position index, following .show function will repeat output related to current position index. Without the patch: # dd if=/proc/net/xt_recent/SSH # original file outpt src=127.0.0.4 ttl: 0 last_seen: 6275444819 oldest_pkt: 1 6275444819 src=127.0.0.2 ttl: 0 last_seen: 6275438906 oldest_pkt: 1 6275438906 src=127.0.0.3 ttl: 0 last_seen: 6275441953 oldest_pkt: 1 6275441953 0+1 records in 0+1 records out 204 bytes copied, 6.1332e-05 s, 3.3 MB/s Read after lseek into middle of last line (offset 140 in example below) generates expected end of last line and then unexpected whole last line once again # dd if=/proc/net/xt_recent/SSH bs=140 skip=1 dd: /proc/net/xt_recent/SSH: cannot skip to specified offset 127.0.0.3 ttl: 0 last_seen: 6275441953 oldest_pkt: 1 6275441953 src=127.0.0.3 ttl: 0 last_seen: 6275441953 oldest_pkt: 1 6275441953 0+1 records in 0+1 records out 132 bytes copied, 6.2487e-05 s, 2.1 MB/s Cc: [email protected] Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-04netfilter: synproxy: synproxy_cpu_seq_next should increase position indexVasily Averin1-1/+1
If .next function does not change position index, following .show function will repeat output related to current position index. Cc: [email protected] Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-04netfilter: nf_conntrack: ct_cpu_seq_next should increase position indexVasily Averin1-1/+1
If .next function does not change position index, following .show function will repeat output related to current position index. Cc: [email protected] Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.