aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-27Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds6-42/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: hwspinlock: depend on OMAP4 ARM: OMAP2+: Fix warnings for GPMC interrupt OMAP4: PandaBoard: remove unused power regulators arm: mach-omap2: omap_l3_smx: fix irq handler setup arm: mach-omap2: devices: fix omap3_l3_init() return value
2011-03-27Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2-2/+12
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: staging: Fix bdops->check_events() misconversion in cyasblkdev_block.c ide: ensure that we re-run the queue handler
2011-03-27Merge branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds21-1403/+2267
* 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block: (122 commits) cciss: fix lost command issue drbd: need include for bitops functions declarations Revert "cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation" cciss: fix missed command status value CMD_UNABORTABLE cciss: remove unnecessary casts cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent cciss: Inform controller we are using 32-bit tags. cciss: hoist tag masking out of loop cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation cciss: export resettable host attribute drbd: drop code present under #ifdef which is relevant to 2.6.28 and below drbd: Fixed handling of read errors on a 'VerifyS' node drbd: Fixed handling of read errors on a 'VerifyT' node drbd: Implemented real timeout checking for request processing time drbd: Remove unused function atodb_endio() drbd: improve log message if received sector offset exceeds local capacity drbd: kill dead code drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails drbd: Removed left over, now wrong comments drbd: serialize admin requests for new verify run with pending bitmap io ...
2011-03-27Merge branch 'docs-next' of git://git.lwn.net/linux-2.6Linus Torvalds8-130/+169
* 'docs-next' of git://git.lwn.net/linux-2.6: docs: update the development process document docs: fix dev_debug() braino in dynamic-debug-howto.txt
2011-03-27Merge branch 'hwmon-for-linus' of ↵Linus Torvalds3-45/+117
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (f71882fg) Add support for the F71889A hwmon: (f71882fg) Add support for the F81865F hwmon: (f71882fg) Document all supported devices hwmon: (f71882fg) Per-chip fan/temperature input count tables hwmon: (f71882fg) Secure chip property definition arrays
2011-03-27Merge branch 'for-linus-1' of git://git.infradead.org/mtd-2.6Linus Torvalds55-648/+4655
* 'for-linus-1' of git://git.infradead.org/mtd-2.6: (49 commits) mtd: mtdswap: fix compilation warning mtdswap: kill strict error handling option mtd: nand: enable software BCH ECC in nand simulator mtd: nand: add software BCH ECC support mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap mtd: sm_rtl: check kmalloc return value mtd: cfi: add support for AMIC flashes (e.g. A29L160AT) lib: add shared BCH ECC library mtd: mxc_nand: fix OOB corruption when page size > 2KiB mtd: DaVinci: Removed header file that is not required mtd: pxa3xx_nand: clean the keep configure code mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself mtd: pxa3xx_nand: unify prepare command mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function mtd: pxa3xx_nand: rework irq logic mtd: pxa3xx_nand: make scan procedure more clear mtd: speedtest: fix integer overflow mtd: mxc_nand: fix read past buffer end mtd: omap3: nand: report corrected ecc errors jffs2: remove a trailing white space in commentaries ...
2011-03-27apm: orphan the driverStephen Rothwell1-3/+1
I no longer have access to any hardware that uses APM and have not provided real maintenance for several years. Hopefully someone with the hardware or energy will step forward if the driver is to be kept. Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-27um: Add myself as co-maintainerRichard Weinberger1-0/+1
Signed-off-by: Richard Weinberger <[email protected]> Acked-and-appreciated-by: Thomas Gleixner <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-27docbook: fix rapidio warningRandy Dunlap1-1/+0
Fix fsl_rio.c kernel-doc warning: no exported symbols as requested by !E are found: Warning(arch/powerpc/sysdev/fsl_rio.c): no structured comments found Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-27docbook: fix broken media buildRandy Dunlap1-1/+0
DocBook/v4l/ no longer has any *.png files, so the 'cp' command fails, breaking the build. Drop the *.png cp. cp: cannot stat `linux-2.6.38-git18/Documentation/DocBook/v4l/*.png': No such file or directory Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-27fs: fix inode.c kernel-doc warningRandy Dunlap1-1/+1
Fix inode.c kernel-doc fatal error: 2 comment sections have the same name: Error(fs/inode.c:1171): duplicate section name 'Note' Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-27ipc: fix util.c kernel-doc warningsRandy Dunlap1-1/+3
Fix ipc/util.c kernel-doc warnings: Warning(ipc/util.c:336): No description found for parameter 'ns' Warning(ipc/util.c:620): No description found for parameter 'ns' Warning(ipc/util.c:790): No description found for parameter 'ns' Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Jesper Juhl <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-27mm: fix memory.c incorrect kernel-docRandy Dunlap1-1/+1
Fix mm/memory.c incorrect kernel-doc function notation: Warning(mm/memory.c:3718): Cannot understand * @access_remote_vm - access another process' address space on line 3718 - I thought it was a doc line Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-27percpu: Omit segment prefix in the UP case for cmpxchg_doubleChristoph Lameter2-8/+16
Omit the segment prefix in the UP case. GS is not used then and we will generate segfaults if cmpxchg16b is used otherwise. Signed-off-by: Christoph Lameter <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-27proc: fix oops on invalid /proc/<pid>/maps accessLinus Torvalds1-1/+2
When m_start returns an error, the seq_file logic will still call m_stop with that error entry, so we'd better make sure that we check it before using it as a vma. Introduced by commit ec6fd8a4355c ("report errors in /proc/*/*map* sanely"), which replaced NULL with various ERR_PTR() cases. (On ia64, you happen to get a unaligned fault instead of a page fault, since the address used is generally some random error code like -EPERM) Reported-by: Anca Emanuel <[email protected]> Reported-by: Tony Luck <[email protected]> Cc: Al Viro <[email protected]> Cc: Américo Wang <[email protected]> Cc: Stephen Wilson <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-27mfd: Clean up max8997 IRQ namespaceSamuel Ortiz1-8/+8
Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: Fold irq_set_chip/irq_set_handlerThomas Gleixner5-12/+8
Use the combined irq_set_chip_and_handler() function instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: Cleanup irq namespaceThomas Gleixner21-131/+131
Converted with coccinelle. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: twl6030: Cleanup interrupt handlingThomas Gleixner1-16/+1
irq_desc checking in the interrupt demux routine is totally pointless. The driver sets those lines up, so that cant go away magically. Remove the open coded handler magic and use the proper accessor. This driver needs to be converted to threaded interrupts and buslock. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: twl4030: Cleanup interrupt handlingThomas Gleixner1-38/+8
irq_desc checking in a function which is called with that irq descriptor locked, is pointless. Equally pointless as the irq desc check in the interrupt service routine. The driver sets those lines up, so that cant go away magically. Remove the open coded handler magic and use the proper accessor. No need to fiddle with irq_desc in the type setting function. The original value is in irq_data and the core code stores the new setting when the return value is 0. This driver needs to be converted to threaded interrupts and buslock. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: mx8925: Remove irq_desc leftoversThomas Gleixner1-2/+0
Remove unused code. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: htc-i2cpld: Cleanup interrupt handlingThomas Gleixner1-18/+7
Remove the pointless irq_desc check in set_type. This function is called with that irq descriptor locked. Also remove the write back of the flow type as the core code does this already when the return value is 0. Also store the flow type in the chip data structure, so there is no need to fiddle in the irq descriptor. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: htc-egpio: Cleanup interrupt handlingThomas Gleixner1-4/+2
Replace the open coded handler call with the prober accessor. Retrieve the handler data from desc. That avoids a redundant lookup in the sparse irq case. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: ezx-pcap: Remvove open coded irq handlingThomas Gleixner1-11/+3
There is no point in checking irq_desc here, as it _is_ available. The driver configured those lines, so they cannot go away. The home brewn disabled/note_interrupt magic can be removed as well by adding a irq_disable callback which avoids the lazy disable. That driver needs to be converted to threaded interrupts. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: 88pm860x: Remove unused irq_desc leftoversThomas Gleixner1-3/+0
Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: asic3: Cleanup irq handlingThomas Gleixner1-11/+6
Remove the open coded access to irq_desc and use the proper wrappers. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: Select MFD_CORE if TPS6105X driver is configuredGuenter Roeck1-0/+1
The TPS61050/61052 driver uses MFD core code, yet does not specify the dependency in Kconfig. If it is the only MFD driver configured, compilation fails with ERROR: "mfd_add_devices" [drivers/mfd/tps6105x.ko] undefined! ERROR: "mfd_remove_devices" [drivers/mfd/tps6105x.ko] undefined! Fix the problem by adding "select MFD_CORE" to the respective Kconfig entry. Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridgeAxel Lin1-0/+1
The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entry will be added to modules.pcimap: rdc321x-southbridge 0x000017f3 0x00006030 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0 Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: Add MAX8997/8966 IRQ controlMyungJoo Ham4-3/+404
This patch enables IRQ handling for MAX8997/8966 chips. Please note that Fuel-Gauge-related IRQs are not implemented in this initial release. The fuel gauge module in MAX8997 is identical to MAX17042, which is already in Linux kernel. In order to use the already-existing MAX17042 driver for fuel gauge module in MAX8997, the main interrupt handler of MAX8997 should relay related interrupts to MAX17042 driver. However, in order to do this, we need to modify MAX17042 driver as well because MAX17042 driver does not have any interrupt handlers for now. We are not going to implement this in this initial release as it is not crucial in basic operations of MAX8997. Signed-off-by: MyungJoo Ham <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: Constify i2c_device_id tablesAxel Lin2-2/+2
Signed-off-by: Axel Lin <[email protected]> Acked-by: Harald Welte <[email protected]> Cc: Matti Aaltonen <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: OLPC: Clean up names to match what OLPC actually usesDaniel Drake2-9/+7
The cs5535-pms cell doesn't actually need to be cloned, so we can drop that and simply have the olpc-xo1.c driver use "cs5535-pms" directly. Also, rename the cs5535-acpi clones to what we actually use for the (currently out-of-tree) SCI driver. In the process, that fixes a subtle bug in olpc-xo1.c which broke powerdown on XO-1s.. olpc-xo1-ac-acpi was a typo, not something that actually existed. Signed-off-by: Daniel Drake <[email protected]> Signed-off-by: Andres Salomon <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-27mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to itAndres Salomon4-57/+52
Replace mfd_shared_platform_driver_register with mfd_clone_cell. The former was called by an mfd client, and registered both a platform driver and device. The latter is called by an mfd driver, and registers only a platform device. The downside of this is that mfd drivers need to be modified whenever new clients are added that share a cell; the upside is that it fits Linux's driver model better. It's also simpler. This also converts cs5535-mfd/olpc-xo1 from the old API. cs5535-mfd now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to them via platform drivers. Signed-off-by: Andres Salomon <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-26staging: Fix bdops->check_events() misconversion in cyasblkdev_block.cTejun Heo1-1/+1
Commit cafb0bfca1 (staging: Convert to bdops->check_events()) incorrectly set bd->user_disk_0->events while initializing bd->user_disk_1. Fix it. The problem was spotted by Milton's suspect code pattern detector. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Milton Miller <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2011-03-26ide: ensure that we re-run the queue handlerJens Axboe1-1/+11
The conversion to blk_delay_queue() missed parts of IDE. Add a blk_delay_queue() to ensure that the request handler gets reinvoked when it needs to. Note that in all but one place the old plug re-run delay of 3 msecs is used, even though it probably could be shorter for performance reasons in some of those cases. Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2011-03-26hwmon: (pmbus) Fix temperature limit register accessGuenter Roeck1-34/+36
Commit 8677011 added auto-update to temperature limit registers. Unfortunately, the update flag is also used to determine if an attribute is writable, which results in read-only temperature limit registers. To fix the problem, pass 'readonly' as separate flag to the function used to add sensor attributes. Signed-off-by: Guenter Roeck <[email protected]>
2011-03-26hwmon: (f71882fg) Add support for the F71889AHans de Goede3-2/+18
Signed-off-by: Hans de Goede <[email protected]> Acked-by: Guenter Roeck <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2011-03-26hwmon: (f71882fg) Add support for the F81865FJean Delvare3-8/+19
Add support for the Fintek F81865F. It's essentially compatible with the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan inputs only. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Hans de Goede <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-03-26hwmon: (f71882fg) Document all supported devicesJean Delvare3-4/+25
The list of supported devices was not always well documented in all places. Clarify and list all devices in documentation, Kconfig and the driver itself. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Hans de Goede <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-03-26hwmon: (f71882fg) Per-chip fan/temperature input count tablesJean Delvare1-6/+30
Use tables to list the count of fan and temperature inputs for all supported chips, almost similar to (but more simple than) what is already done for voltage inputs. This avoids repeating the same tests in different functions, and will make it easier to add support for chips with a different count of fan or temperature inputs. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Hans de Goede <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-03-26hwmon: (f71882fg) Secure chip property definition arraysJean Delvare1-27/+27
Using C99-style array initialization will ensure definitions won't drift if the chips enum gets new values added. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Hans de Goede <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-03-25Merge branch 'syscore' of ↵Linus Torvalds20-351/+206
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: Introduce ARCH_NO_SYSDEV_OPS config option (v2) cpufreq: Use syscore_ops for boot CPU suspend/resume (v2) KVM: Use syscore_ops instead of sysdev class and sysdev PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev timekeeping: Use syscore_ops instead of sysdev class and sysdev x86: Use syscore_ops instead of sysdev classes and sysdevs
2011-03-25Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix test of uninitialized netdev
2011-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds74-962/+5830
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (55 commits) [SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module [SCSI] qla4xxx: Use polling mode for disable interrupt mailbox completion [SCSI] Revert "[SCSI] Retrieve the Caching mode page" [SCSI] bnx2fc: IO completion not processed due to missed wakeup [SCSI] qla4xxx: Update driver version to 5.02.00-k6 [SCSI] qla4xxx: masking required bits of add_fw_options during initialization [SCSI] qla4xxx: added new function qla4xxx_relogin_all_devices [SCSI] qla4xxx: add support for ql4xsess_recovery_tmo cmd line param [SCSI] qla4xxx: Add support for ql4xmaxqdepth command line parameter [SCSI] qla4xxx: cleanup function qla4xxx_process_ddb_changed [SCSI] qla4xxx: Prevent other port reinitialization during remove_adapter [SCSI] qla4xxx: remove unused ddb flag DF_NO_RELOGIN [SCSI] qla4xxx: cleanup DDB relogin logic during initialization [SCSI] qla4xxx: Do not retry ISP82XX initialization if H/W state is failed [SCSI] qla4xxx: Do not send mbox command if FW is in failed state [SCSI] qla4xxx: cleanup qla4xxx_initialize_ddb_list() [SCSI] ses: add subenclosure support [SCSI] bnx2fc: Bump version to 1.0.1 [SCSI] bnx2fc: Remove unnecessary module state checks [SCSI] bnx2fc: Fix MTU issue by using static MTU ...
2011-03-25Merge branch 'for_linus' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kdb: add usage string of 'per_cpu' command kgdb,x86_64: fix compile warning found with sparse kdb: code cleanup to use macro instead of value kgdboc,kgdbts: strlen() doesn't count the terminator
2011-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds66-364/+1906
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) route: Take the right src and dst addresses in ip_route_newports ipv4: Fix nexthop caching wrt. scoping. ipv4: Invalidate nexthop cache nh_saddr more correctly. net: fix pch_gbe section mismatch warning ipv4: fix fib metrics mlx4_en: Removing HW info from ethtool -i report. net_sched: fix THROTTLED/RUNNING race drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region bonding: fix rx_handler locking myri10ge: fix rmmod crash mlx4_en: updated driver version to 1.5.4.1 mlx4_en: Using blue flame support mlx4_core: reserve UARs for userspace consumers mlx4_core: maintain available field in bitmap allocator mlx4: Add blue flame support for kernel consumers mlx4_en: Enabling new steering mlx4: Add support for promiscuous mode in the new steering model. mlx4: generalization of multicast steering. mlx4_en: Reporting HW revision in ethtool -i ...
2011-03-25Merge branch 'for-linus' of ↵Linus Torvalds6-11/+55
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Disable ASPM when _OSC control is not granted for PCIe services PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs PCI: PCIe links may not get configured for ASPM under POWERSAVE mode PCI/ACPI: Report ASPM support to BIOS if not disabled from command line
2011-03-25Merge git://git.infradead.org/battery-2.6Linus Torvalds15-226/+1009
* git://git.infradead.org/battery-2.6: (30 commits) bq20z75: Fix time and temp units bq20z75: Fix issues with present and suspend z2_battery: Fix count of properties s3c_adc_battery: Fix method names when PM not set z2_battery: Add MODULE_DEVICE_TABLE ds2782_battery: Add MODULE_DEVICE_TABLE bq20z75: Add MODULE_DEVICE_TABLE power_supply: Update power_supply_is_watt_property bq20z75: Add i2c retry mechanism bq20z75: Add optional battery detect gpio twl4030_charger: Make the driver atomic notifier safe bq27x00: Use single i2c_transfer call for property read bq27x00: Cleanup bq27x00_i2c_read bq27x00: Minor cleanups bq27x00: Give more specific reports on battery status bq27x00: Add MODULE_DEVICE_TABLE bq27x00: Add new properties bq27x00: Poll battery state bq27x00: Cache battery registers bq27x00: Add bq27000 support ...
2011-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds11-31/+326
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm stripe: implement merge method dm mpath: allow table load with no priority groups dm mpath: fail message ioctl if specified path is not valid dm ioctl: add flag to wipe buffers for secure data dm ioctl: prepare for crypt key wiping dm crypt: wipe keys string immediately after key is set dm: add flakey target dm: fix opening log and cow devices for read only tables
2011-03-25Merge branch 'for-linus' of ↵Linus Torvalds2-6/+14
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: tsc2005 - fix locking issue Input: tsc2005 - use relative jiffies to schedule the watchdog Input: tsc2005 - driver should depend on GENERIC_HARDIRQS
2011-03-25Merge branch 'irq-cleanup-for-linus' of ↵Linus Torvalds40-604/+285
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (23 commits) genirq: Expand generic show_interrupts() gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler gpio: Cleanup genirq namespace arm: ep93xx: Add basic interrupt info arm/gpio: Remove three copies of broken and racy debug code xtensa: Use generic show_interrupts() xtensa: Convert genirq namespace xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED xtensa: Convert s6000 gpio irq_chip to new functions xtensa: Convert main irq_chip to new functions um: Use generic show_interrupts() um: Convert genirq namespace m32r: Use generic show_interrupts() m32r: Convert genirq namespace h8300: Use generic show_interrupts() h8300: Convert genirq namespace avr32: Cleanup eic_set_irq_type() avr32: Use generic show_interrupts() avr: Cleanup genirq namespace avr32: Use generic IRQ config, enable GENERIC_HARDIRQS_NO_DEPRECATED ... Fix up trivial conflict in drivers/gpio/timbgpio.c
Powered by cgit, Gruvboxed by Blaster4385.