aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-05KVM: x86: Take a u64 when checking for a valid dr7 valueSean Christopherson1-1/+1
Take a u64 instead of an unsigned long in kvm_dr7_valid() to fix a build warning on i386 due to right-shifting a 32-bit value by 32 when checking for bits being set in dr7[63:32]. Alternatively, the warning could be resolved by rewriting the check to use an i386-friendly method, but taking a u64 fixes another oddity on 32-bit KVM. Beause KVM implements natural width VMCS fields as u64s to avoid layout issues between 32-bit and 64-bit, a devious guest can stuff vmcs12->guest_dr7 with a 64-bit value even when both the guest and host are 32-bit kernels. KVM eventually drops vmcs12->guest_dr7[63:32] when propagating vmcs12->guest_dr7 to vmcs02, but ideally KVM would not rely on that behavior for correctness. Cc: Jim Mattson <[email protected]> Cc: Krish Sadhukhan <[email protected]> Fixes: ecb697d10f70 ("KVM: nVMX: Check GUEST_DR7 on vmentry of nested guests") Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: x86: use raw clock values consistentlyPaolo Bonzini1-15/+23
Commit 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") changed kvmclock to use tkr_raw instead of tkr_mono. However, the default kvmclock_offset for the VM was still based on the monotonic clock and, if the raw clock drifted enough from the monotonic clock, this could cause a negative system_time to be written to the guest's struct pvclock. RHEL5 does not like it and (if it boots fast enough to observe a negative time value) it hangs. There is another thing to be careful about: getboottime64 returns the host boot time with tkr_mono frequency, and subtracting the tkr_raw-based kvmclock value will cause the wallclock to be off if tkr_raw drifts from tkr_mono. To avoid this, compute the wallclock delta from the current time instead of being clever and using getboottime64. Fixes: 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") Cc: [email protected] Reviewed-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: x86: reorganize pvclock_gtod_data membersPaolo Bonzini1-17/+12
We will need a copy of tk->offs_boot in the next patch. Store it and cleanup the struct: instead of storing tk->tkr_xxx.base with the tk->offs_boot included, store the raw value in struct pvclock_clock and sum it in do_monotonic_raw and do_realtime. tk->tkr_xxx.xtime_nsec also moves to struct pvclock_clock. While at it, fix a (usually harmless) typo in do_monotonic_raw, which was using gtod->clock.shift instead of gtod->raw_clock.shift. Fixes: 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") Cc: [email protected] Reviewed-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: nVMX: delete meaningless nested_vmx_run() declarationMiaohe Lin1-2/+0
The function nested_vmx_run() declaration is below its implementation. So this is meaningless and should be removed. Signed-off-by: Miaohe Lin <[email protected]> Reviewed-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: SVM: allow AVIC without split irqchipPaolo Bonzini1-1/+1
SVM is now able to disable AVIC dynamically whenever the in-kernel PIT sets up an ack notifier, so we can enable it even if in-kernel IOAPIC/PIC/PIT are in use. Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: ioapic: Lazy update IOAPIC EOISuravee Suthikulpanit1-0/+39
In-kernel IOAPIC does not receive EOI with AMD SVM AVIC since the processor accelerate write to APIC EOI register and does not trap if the interrupt is edge-triggered. Workaround this by lazy check for pending APIC EOI at the time when setting new IOPIC irq, and update IOAPIC EOI if no pending APIC EOI. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: ioapic: Refactor kvm_ioapic_update_eoi()Suravee Suthikulpanit1-54/+56
Refactor code for handling IOAPIC EOI for subsequent patch. There is no functional change. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: i8254: Deactivate APICv when using in-kernel PIT re-injection mode.Suravee Suthikulpanit3-2/+22
AMD SVM AVIC accelerates EOI write and does not trap. This causes in-kernel PIT re-injection mode to fail since it relies on irq-ack notifier mechanism. So, APICv is activated only when in-kernel PIT is in discard mode e.g. w/ qemu option: -global kvm-pit.lost_tick_policy=discard Also, introduce APICV_INHIBIT_REASON_PIT_REINJ bit to be used for this reason. Suggested-by: Paolo Bonzini <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05svm: Temporarily deactivate AVIC during ExtINT handlingSuravee Suthikulpanit2-4/+30
AMD AVIC does not support ExtINT. Therefore, AVIC must be temporary deactivated and fall back to using legacy interrupt injection via vINTR and interrupt window. Also, introduce APICV_INHIBIT_REASON_IRQWIN to be used for this reason. Signed-off-by: Suravee Suthikulpanit <[email protected]> [Rename svm_request_update_avic to svm_toggle_avic_for_extint. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05svm: Deactivate AVIC when launching guest with nested SVM supportSuravee Suthikulpanit2-1/+11
Since AVIC does not currently work w/ nested virtualization, deactivate AVIC for the guest if setting CPUID Fn80000001_ECX[SVM] (i.e. indicate support for SVM, which is needed for nested virtualization). Also, introduce a new APICV_INHIBIT_REASON_NESTED bit to be used for this reason. Suggested-by: Alexander Graf <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: hyperv: Use APICv update request interfaceSuravee Suthikulpanit5-18/+8
Since disabling APICv has to be done for all vcpus on AMD-based system, adopt the newly introduced kvm_request_apicv_update() interface, and introduce a new APICV_INHIBIT_REASON_HYPERV. Also, remove the kvm_vcpu_deactivate_apicv() since no longer used. Cc: Roman Kagan <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05svm: Add support for dynamic APICvSuravee Suthikulpanit1-10/+28
Add necessary logics to support (de)activate AVIC at runtime. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Introduce x86 ops hook for pre-update APICvSuravee Suthikulpanit3-0/+9
AMD SVM AVIC needs to update APIC backing page mapping before changing APICv mode. Introduce struct kvm_x86_ops.pre_update_apicv_exec_ctrl function hook to be called prior KVM APICv update request to each vcpu. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Introduce APICv x86 ops for checking APIC inhibit reasonsSuravee Suthikulpanit4-0/+21
Inibit reason bits are used to determine if APICv deactivation is applicable for a particular hardware virtualization architecture. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: svm: avic: Add support for dynamic setup/teardown of virtual APIC ↵Suravee Suthikulpanit1-6/+5
backing page Re-factor avic_init_access_page() to avic_update_access_page() since activate/deactivate AVIC requires setting/unsetting the memory region used for virtual APIC backing page (APIC_ACCESS_PAGE_PRIVATE_MEMSLOT). Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: svm: Add support to (de)activate posted interruptsSuravee Suthikulpanit1-1/+36
Introduce interface for (de)activate posted interrupts, and implement SVM hooks to toggle AMD IOMMU guest virtual APIC mode. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Add APICv (de)activate request trace pointsSuravee Suthikulpanit2-0/+21
Add trace points when sending request to (de)activate APICv. Suggested-by: Alexander Graf <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Add support for dynamic APICv activationSuravee Suthikulpanit2-0/+42
Certain runtime conditions require APICv to be temporary deactivated during runtime. The current implementation only support run-time deactivation of APICv when Hyper-V SynIC is enabled, which is not temporary. In addition, for AMD, when APICv is (de)activated at runtime, all vcpus in the VM have to operate in the same mode. Thus the requesting vcpu must notify the others. So, introduce the following: * A new KVM_REQ_APICV_UPDATE request bit * Interfaces to request all vcpus to update APICv status * A new interface to update APICV-related parameters for each vcpu Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: x86: remove get_enable_apicv from kvm_x86_opsPaolo Bonzini3-13/+0
It is unused now. Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Introduce APICv inhibit reason bitsSuravee Suthikulpanit4-2/+38
There are several reasons in which a VM needs to deactivate APICv e.g. disable APICv via parameter during module loading, or when enable Hyper-V SynIC support. Additional inhibit reasons will be introduced later on when dynamic APICv is supported, Introduce KVM APICv inhibit reason bits along with a new variable, apicv_inhibit_reasons, to help keep track of APICv state for each VM, Initially, the APICV_INHIBIT_REASON_DISABLE bit is used to indicate the case where APICv is disabled during KVM module load. (e.g. insmod kvm_amd avic=0 or insmod kvm_intel enable_apicv=0). Signed-off-by: Suravee Suthikulpanit <[email protected]> [Do not use get_enable_apicv; consider irqchip_split in svm.c. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: lapic: Introduce APICv update helper functionSuravee Suthikulpanit2-5/+18
Re-factor code into a helper function for setting lapic parameters when activate/deactivate APICv, and export the function for subsequent usage. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05Merge tag 'asoc-v5.6-2' of ↵Takashi Iwai25-123/+118
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.6 A collection of updates for bugs fixed since the initial pull request, the most important one being the addition of COMMON_CLK for wcd934x which is needed for MFD to be merged.
2020-02-05ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECSGeert Uytterhoeven1-1/+1
Just adding a dependency on COMMON_CLK to SND_SOC_WCD934X is not sufficient, as enabling SND_SOC_ALL_CODECS will still select it, breaking the build later: WARNING: unmet direct dependencies detected for SND_SOC_WCD934X Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMMON_CLK [=n] && MFD_WCD934X [=m] Selected by [m]: - SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y] && MFD_WCD934X [=m] ... ERROR: "of_clk_add_provider" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "of_clk_src_simple_get" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "clk_hw_register" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "__clk_get_name" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! Fix this by adding the missing dependency to SND_SOC_ALL_CODECS Fixes: 42b716359beca106 ("ASoC: wcd934x: Add missing COMMON_CLK dependency") Signed-off-by: Geert Uytterhoeven <[email protected]> Tested-by: Stephen Rothwell <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-02-05bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdlineSteven Rostedt (VMware)3-7/+29
As the bootconfig is appended to the initrd it is not as easy to modify as the kernel command line. If there's some issue with the kernel, and the developer wants to boot a pristine kernel, it should not be needed to modify the initrd to remove the bootconfig for a single boot. As bootconfig is silently added (if the admin does not know where to look they may not know it's being loaded). It should be explicitly added to the kernel cmdline. The loading of the bootconfig is only done if "bootconfig" is on the kernel command line. This will let admins know that the kernel command line is extended. Note, after adding printk()s for when the size is too great or the checksum is wrong, exposed that the current method always looked for the boot config, and if this size and checksum matched, it would parse it (as if either is wrong a printk has been added to show this). It's better to only check this if the boot config is asked to be looked for. Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com Acked-by: Masami Hiramatsu <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-05dt-bindings: Fix paths in schema $id fieldsRob Herring22-22/+22
The $id path checks were inadequately checking the path part of the $id value. With the check fixed, there's a number of errors that need to be fixed. Most of the errors are including 'bindings/' in the path which should not be as that is considered the root. Cc: Andy Gross <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Cc: Michael Turquette <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Maxime Coquelin <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: "Nuno Sá" <[email protected]> Cc: Jean Delvare <[email protected]> Cc: Stefan Popa <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Hartmut Knaack <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Peter Meerwald-Stadler <[email protected]> Cc: Marcus Folkesson <[email protected]> Cc: Kent Gustavsson <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Guenter Roeck <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-02-05Merge branch 'parisc-5.6-1' of ↵Linus Torvalds9-1206/+55
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "A page table initialization cleanup from Mike Rapoport and regenerated defconfig files from Helge Deller" * 'parisc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Regenerate parisc defconfigs parisc: map_pages(): cleanup page table initialization
2020-02-04xtensa: ISS: improve simcall assemblyMax Filippov1-5/+3
Drop redundant result moving from inline assembly, use a1 and b1 values as return value and errno value respectively. Signed-off-by: Max Filippov <[email protected]>
2020-02-04xtensa: reorganize vectors placementMax Filippov6-20/+51
Allow vectors to be either merged into the kernel .text or put at a fixed virtual address independently of XIP option. Drop option that puts vectors at a fixed offset from the kernel text. Add choice to Kconfig. Vectors at fixed virtual address may be useful for XIP-aware MTD support and for noMMU configurations with available IRAM. Configurations without VECBASE register must put their vectors at specific locations regardless of the selected option. All other configurations should happily use merged vectors. Signed-off-by: Max Filippov <[email protected]>
2020-02-04xtensa: separate SMP and XIP supportMax Filippov1-34/+34
There's no real dependency between SMP and XIP, allow them to be selected together. Always define 2- and 4-argument SECTION_VECTOR macros, always use 4-argument macro for the secondary reset vector and always define relocation entry for it. Signed-off-by: Max Filippov <[email protected]>
2020-02-04xtensa: move fast exception handlers close to vectorsMax Filippov6-13/+38
On XIP kernels it makes sense to have exception vectors and fast exception handlers together (in a fast memory). In addition, with MTD XIP support both vectors and fast exception handlers must be outside of the FLASH. Add section .exception.text and move fast exception handlers to it. Put it together with vectors when vectors are outside of the .text. Signed-off-by: Max Filippov <[email protected]>
2020-02-05Merge tag 'jfs-5.6' of git://github.com/kleikamp/linux-shaggyLinus Torvalds1-1/+0
Pull jfs update from David Kleikamp: "Trivial cleanup for jfs" * tag 'jfs-5.6' of git://github.com/kleikamp/linux-shaggy: jfs: remove unused MAXL2PAGES
2020-02-05Merge branch 'work.recursive_removal' of ↵Linus Torvalds9-218/+104
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs recursive removal updates from Al Viro: "We have quite a few places where synthetic filesystems do an equivalent of 'rm -rf', with varying amounts of code duplication, wrong locking, etc. That really ought to be a library helper. Only debugfs (and very similar tracefs) are converted here - I have more conversions, but they'd never been in -next, so they'll have to wait" * 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems
2020-02-05Merge branch 'imm.timestamp' of ↵Linus Torvalds13-107/+61
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs timestamp updates from Al Viro: "More 64bit timestamp work" * 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kernfs: don't bother with timestamp truncation fs: Do not overload update_time fs: Delete timespec64_trunc() fs: ubifs: Eliminate timespec64_trunc() usage fs: ceph: Delete timespec64_trunc() usage fs: cifs: Delete usage of timespec64_trunc fs: fat: Eliminate timespec64_trunc() usage utimes: Clamp the timestamps in notify_change()
2020-02-04drm/amd/dm/mst: Ignore payload update failuresLyude Paul1-9/+4
Disabling a display on MST can potentially happen after the entire MST topology has been removed, which means that we can't communicate with the topology at all in this scenario. Likewise, this also means that we can't properly update payloads on the topology and as such, it's a good idea to ignore payload update failures when disabling displays. Currently, amdgpu makes the mistake of halting the payload update process when any payload update failures occur, resulting in leaving DC's local copies of the payload tables out of date. This ends up causing problems with hotplugging MST topologies, and causes modesets on the second hotplug to fail like so: [drm] Failed to updateMST allocation table forpipe idx:1 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1511 at drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677 update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O) rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core rtsx_pci pinctrl_amd CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G O 5.5.0-rc7Lyude-Test+ #4 Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 ) 01/31/2019 RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06 49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9 2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00 RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: 0000000000000000 RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610 RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000 R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000 R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: 0000000000000002 FS: 00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: 00000000003406e0 Call Trace: ? mutex_lock+0xe/0x30 dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu] ? dm_read_reg_func+0x39/0xb0 [amdgpu] ? core_link_enable_stream+0x656/0x730 [amdgpu] core_link_enable_stream+0x656/0x730 [amdgpu] dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu] ? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu] ? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu] dc_commit_state+0x292/0x770 [amdgpu] ? add_timer+0x101/0x1f0 ? ttm_bo_put+0x1a1/0x2f0 [ttm] amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu] ? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu] ? amdgpu_bo_move+0x16d/0x2b0 [amdgpu] ? ttm_bo_handle_move_mem+0x118/0x570 [ttm] ? ttm_bo_validate+0x134/0x150 [ttm] ? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu] ? _cond_resched+0x15/0x30 ? wait_for_completion_timeout+0x38/0x160 ? _cond_resched+0x15/0x30 ? wait_for_completion_interruptible+0x33/0x190 commit_tail+0x94/0x130 [drm_kms_helper] drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper] drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper] drm_mode_setcrtc+0x194/0x6a0 [drm] ? _cond_resched+0x15/0x30 ? mutex_lock+0xe/0x30 ? drm_mode_getcrtc+0x180/0x180 [drm] drm_ioctl_kernel+0xaa/0xf0 [drm] drm_ioctl+0x208/0x390 [drm] ? drm_mode_getcrtc+0x180/0x180 [drm] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0x458/0x6d0 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fab2121f87b Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: 000055dbd2985d10 R10: 000055dbd2196280 R11: 0000000000000246 R12: 00000000c06864a2 R13: 000000000000000b R14: 0000000000000000 R15: 000055dbd2196280 ---[ end trace 6ea888c24d2059cd ]--- Note as well, I have only been able to reproduce this on setups with 2 MST displays. Changes since v1: * Don't return false when part 1 or part 2 of updating the payloads fails, we don't want to abort at any step of the process even if things fail Reviewed-by: Mikita Lipski <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Acked-by: Harry Wentland <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu: update default voltage for boot od table for navi1xAlex Deucher1-1/+8
It needed to be updated as well so it will show the proper values if you reset to the defaults. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04io_uring: cleanup fixed file data table referencesJens Axboe1-13/+19
syzbot reports a use-after-free in io_ring_file_ref_switch() when it tries to switch back to percpu mode. When we put the final reference to the table by calling percpu_ref_kill_and_confirm(), we don't want the zero reference to queue async work for flushing the potentially queued up items. We currently do a few flush_work(), but they merely paper around the issue, since the work item may not have been queued yet depending on the when the percpu-ref callback gets run. Coming into the file unregister, we know we have the ring quiesced. io_ring_file_ref_switch() can check for whether or not the ref is dying or not, and not queue anything async at that point. Once the ref has been confirmed killed, flush any potential items manually. Reported-by: [email protected] Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update") Signed-off-by: Jens Axboe <[email protected]>
2020-02-05cpuidle: Documentation: Clean up PM QoS descriptionRafael J. Wysocki1-4/+4
Clean up the language in one paragraph in the PM QoS description in Documentation/admin-guide/pm/cpuidle.rst. Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-02-04io_uring: spin for sq thread to idle on shutdownJens Axboe1-1/+12
As part of io_uring shutdown, we cancel work that is pending and won't necessarily complete on its own. That includes requests like poll commands and timeouts. If we're using SQPOLL for kernel side submission and we shutdown the ring immediately after queueing such work, we can race with the sqthread doing the submission. This means we may miss cancelling some work, which results in the io_uring shutdown hanging forever. Cc: [email protected] Signed-off-by: Jens Axboe <[email protected]>
2020-02-04dt-bindings: PCI: intel: Fix dt_binding_check compilation failureDilip Kota1-3/+1
Remove <dt-bindings/clock/intel,lgm-clk.h> dependency as it is not present in the mainline tree. Use numeric value instead of LGM_GCLK_PCIE10 macro. Signed-off-by: Dilip Kota <[email protected]> [robh: Also drop interrupt-parent from example] Signed-off-by: Rob Herring <[email protected]>
2020-02-04dt-bindings: phy: Fix errors in intel,lgm-emmc-phy exampleRob Herring1-1/+3
DT labels can't have '-' in them causing a compile failure in the example. Fixing that leads to more warnings: Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:23.13-33: Warning (reg_format): /example-0/chiptop@e0200000/emmc-phy@a8:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #address-cells value Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #size-cells value Fixes: 5bc999108025 ("dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY") Cc: Ramuthevar Vadivel Murugan <[email protected]> Cc: Dafna Hirschfeld <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-02-04help_next should increase position indexVasily Averin1-0/+1
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Mike Marshall <[email protected]>
2020-02-04Merge branch 'nvme-5.6' of git://git.infradead.org/nvme into block-5.6Jens Axboe6-51/+72
Pull NVMe fixes from Keith. * 'nvme-5.6' of git://git.infradead.org/nvme: nvmet: update AEN list and array at one place nvmet: Fix controller use after free nvmet: Fix error print message at nvmet_install_queue function nvme-pci: remove nvmeq->tags nvmet: fix dsm failure when payload does not match sgl descriptor nvmet: Pass lockdep expression to RCU lists
2020-02-04NFSv4.0: nfs4_do_fsinfo() should not do implicit lease renewalsRobert Milkowski4-14/+11
Currently, each time nfs4_do_fsinfo() is called it will do an implicit NFS4 lease renewal, which is not compliant with the NFS4 specification. This can result in a lease being expired by an NFS server. Commit 83ca7f5ab31f ("NFS: Avoid PUTROOTFH when managing leases") introduced implicit client lease renewal in nfs4_do_fsinfo(), which can result in the NFSv4.0 lease to expire on a server side, and servers returning NFS4ERR_EXPIRED or NFS4ERR_STALE_CLIENTID. This can easily be reproduced by frequently unmounting a sub-mount, then stat'ing it to get it mounted again, which will delay or even completely prevent client from sending RENEW operations if no other NFS operations are issued. Eventually nfs server will expire client's lease and return an error on file access or next RENEW. This can also happen when a sub-mount is automatically unmounted due to inactivity (after nfs_mountpoint_expiry_timeout), then it is mounted again via stat(). This can result in a short window during which client's lease will expire on a server but not on a client. This specific case was observed on production systems. This patch removes the implicit lease renewal from nfs4_do_fsinfo(). Fixes: 83ca7f5ab31f ("NFS: Avoid PUTROOTFH when managing leases") Signed-off-by: Robert Milkowski <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2020-02-04NFSv4: try lease recovery on NFS4ERR_EXPIREDRobert Milkowski1-0/+5
Currently, if an nfs server returns NFS4ERR_EXPIRED to open(), we return EIO to applications without even trying to recover. Fixes: 272289a3df72 ("NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid") Signed-off-by: Robert Milkowski <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2020-02-05nvmet: update AEN list and array at one placeDaniel Wagner1-27/+36
All async events are enqueued via nvmet_add_async_event() which updates the ctrl->async_event_cmds[] array and additionally an struct nvmet_async_event is added to the ctrl->async_events list. Under normal operations the nvmet_async_event_work() updates again the ctrl->async_event_cmds and removes the corresponding struct nvmet_async_event from the list again. Though nvmet_sq_destroy() could be called which calls nvmet_async_events_free() which only updates the ctrl->async_event_cmds[] array. Add new functions nvmet_async_events_process() and nvmet_async_events_free() to process async events, update an array and the list. When we destroy submission queue after clearing the aen present on the ctrl->async list we also loop over ctrl->async_event_cmds[] for any requests posted by the host for which we don't have the AEN in the ctrl->async_events list by calling nvmet_async_event_process() and nvmet_async_events_free(). Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Daniel Wagner <[email protected]> [[email protected] * Loop over and clear out outstanding requests * Update changelog ] Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-02-04ALSA: hda - Fix DP-MST support for NVIDIA codecsNikhil Mahale1-31/+63
If dyn_pcm_assign is set, different jack objects are being created for pcm and pins. If dyn_pcm_assign is set, generic_hdmi_build_jack() calls into add_hdmi_jack_kctl() to create and track separate jack object for pcm. Like sync_eld_via_acomp(), hdmi_present_sense_via_verbs() also need to report status change of the pcm jack. Rename pin_idx_to_jack() to pin_idx_to_pcm_jack(). Update hdmi_present_sense_via_verbs() to report plug state of pcm jack object. Unlike sync_eld_via_acomp(), for !acomp drivers the pcm jack's plug state must be consistent with plug state of pin's jack. Fixes: 5398e94fb753 ("ALSA: hda - Add DP-MST support for NVIDIA codecs") Reported-and-tested-by: Martin Regner <[email protected]> Signed-off-by: Nikhil Mahale <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-02-05nvmet: Fix controller use after freeIsrael Rukshin1-4/+9
After nvmet_install_queue() sets sq->ctrl calling to nvmet_sq_destroy() reduces the controller refcount. In case nvmet_install_queue() fails, calling to nvmet_ctrl_put() is done twice (at nvmet_sq_destroy and nvmet_execute_io_connect/nvmet_execute_admin_connect) instead of once for the queue which leads to use after free of the controller. Fix this by set NULL at sq->ctrl in case of a failure at nvmet_install_queue(). The bug leads to the following Call Trace: [65857.994862] refcount_t: underflow; use-after-free. [65858.108304] Workqueue: events nvmet_rdma_release_queue_work [nvmet_rdma] [65858.115557] RIP: 0010:refcount_warn_saturate+0xe5/0xf0 [65858.208141] Call Trace: [65858.211203] nvmet_sq_destroy+0xe1/0xf0 [nvmet] [65858.216383] nvmet_rdma_release_queue_work+0x37/0xf0 [nvmet_rdma] [65858.223117] process_one_work+0x167/0x370 [65858.227776] worker_thread+0x49/0x3e0 [65858.232089] kthread+0xf5/0x130 [65858.235895] ? max_active_store+0x80/0x80 [65858.240504] ? kthread_bind+0x10/0x10 [65858.244832] ret_from_fork+0x1f/0x30 [65858.249074] ---[ end trace f82d59250b54beb7 ]--- Fixes: bb1cc74790eb ("nvmet: implement valid sqhd values in completions") Fixes: 1672ddb8d691 ("nvmet: Add install_queue callout") Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-02-05nvmet: Fix error print message at nvmet_install_queue functionIsrael Rukshin1-1/+1
Place the arguments in the correct order. Fixes: 1672ddb8d691 ("nvmet: Add install_queue callout") Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-02-04NFS: Fix memory leaksWenwen Wang1-2/+2
In _nfs42_proc_copy(), 'res->commit_res.verf' is allocated through kzalloc() if 'args->sync' is true. In the following code, if 'res->synchronous' is false, handle_async_copy() will be invoked. If an error occurs during the invocation, the following code will not be executed and the error will be returned . However, the allocated 'res->commit_res.verf' is not deallocated, leading to a memory leak. This is also true if the invocation of process_copy_commit() returns an error. To fix the above leaks, redirect the execution to the 'out' label if an error is encountered. Signed-off-by: Wenwen Wang <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2020-02-04nfs: optimise readdir cache page invalidationDai Ngo2-2/+10
When the directory is large and it's being modified by one client while another client is doing the 'ls -l' on the same directory then the cache page invalidation from nfs_force_use_readdirplus causes the reading client to keep restarting READDIRPLUS from cookie 0 which causes the 'ls -l' to take a very long time to complete, possibly never completing. Currently when nfs_force_use_readdirplus is called to switch from READDIR to READDIRPLUS, it invalidates all the cached pages of the directory. This cache page invalidation causes the next nfs_readdir to re-read the directory content from cookie 0. This patch is to optimise the cache invalidation in nfs_force_use_readdirplus by only truncating the cached pages from last page index accessed to the end the file. It also marks the inode to delay invalidating all the cached page of the directory until the next initial nfs_readdir of the next 'ls' instance. Signed-off-by: Dai Ngo <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> [Anna - Fix conflicts with Trond's readdir patches] [Anna - Remove redundant call to nfs_zap_mapping()] [Anna - Replace d_inode(file_dentry(desc->file)) with file_inode(desc->file)] Signed-off-by: Anna Schumaker <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.