| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug
headphone or headset.
It had a chance to get no sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Ensure there is sufficient room to access the protocol field of the
VLAN header, validate it once before the flowtable lookup.
=====================================================
BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline]
nf_ingress net/core/dev.c:5440 [inline]
Fixes: 4cd91f7c290f ("netfilter: flowtable: add vlan support")
Reported-by: [email protected]
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Depopulate device in probe error paths to fix leak of children
resources.
Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC")
Cc: [email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
Acked-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The probe function never performs any paltform device allocation, thus
error path "undo_platform_dev_alloc" is entirely bogus. It drops the
reference count from the platform device being probed. If error path is
triggered, this will lead to unbalanced device reference counts and
premature release of device resources, thus possible use-after-free when
releasing remaining devm-managed resources.
Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC")
Cc: [email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Thinh Nguyen <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an
endpoint is only assigned once. Unless the endpoint is reset, don't
clear this flag. Otherwise we may set endpoint resource again, which
prevents the driver from initiate transfer after handling a STALL or
endpoint halt to the control endpoint.
Commit f2e0eee47038 ("usb: dwc3: ep0: Don't reset resource alloc flag")
was fixing the initial issue, but did this only for physical ep1. Since
the function dwc3_ep0_stall_and_restart is resetting the flags for both
physical endpoints, this also has to be done for ep0.
Cc: [email protected]
Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow")
Acked-by: Thinh Nguyen <[email protected]>
Signed-off-by: Michael Grzeschik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
remove_power_attributes()
Device attribute group @usb3_hardware_lpm_attr_group is merged by
add_power_attributes(), but it is not unmerged explicitly, fixed by
unmerging it in remove_power_attributes().
Fixes: 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM")
Cc: [email protected]
Signed-off-by: Zijun Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Some FSA4480-compatible chips like the OCP96011 used on Fairphone 5
return 0x00 from the CHIP_ID register. Handle that gracefully and only
fail probe when the I2C read has failed.
With this the dev_dbg will print 0 but otherwise continue working.
[ 0.251581] fsa4480 1-0042: Found FSA4480 v0.0 (Vendor ID = 0)
Cc: [email protected]
Fixes: e885f5f1f2b4 ("usb: typec: fsa4480: Check if the chip is really there")
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Depopulate device in probe error paths to fix leak of children
resources.
Fixes: 53b5ff83d893 ("usb: dwc3: xilinx: improve error handling for PM APIs")
Cc: [email protected]
Reviewed-by: Radhey Shyam Pandey <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Depopulate device in probe error paths to fix leak of children
resources.
Fixes: ee249b455494 ("usb: dwc3: omap: remove IRQ_NOAUTOEN used with shared irq")
Cc: [email protected]
Acked-by: Thinh Nguyen <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Radhey Shyam Pandey <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
An USB hub is not a HCD, but an USB device. Fix the referenced schema
accordingly.
Fixes: bfbf2e4b77e2 ("dt-bindings: usb: Document the Microchip USB2514 hub")
Cc: [email protected]
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Since commit "6acba0345b68 usb:gadget:uvc Do not use worker thread to pump
isoc usb requests", pump work could only be queued in uvc_video_complete()
and uvc_v4l2_qbuf(). If VIDIOC_QBUF is executed before VIDIOC_STREAMON,
we can only depend on uvc_video_complete() to queue pump work. However,
this requires some free requests in req_ready list. If req_ready list is
empty all the time, pump work will never be queued and video datas will
never be pumped to usb controller. Actually, this situation could happen
when run uvc-gadget with static image:
$ ./uvc-gadget -i 1080p.jpg uvc.0
When capture image from this device, the user app will always block there.
The issue is uvc driver has queued video buffer before streamon, but the
req_ready list is empty all the time after streamon. This will queue pump
work in uvcg_video_enable() to fill some request to req_ready list so the
uvc device could work properly.
Fixes: 6acba0345b68 ("usb:gadget:uvc Do not use worker thread to pump isoc usb requests")
Cc: [email protected]
Signed-off-by: Xu Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
USB_DEVICE(0x1901, 0x0006) may send data before cdc_acm is ready, which
may be misinterpreted in the default N_TTY line discipline.
Signed-off-by: Ian Ray <[email protected]>
Acked-by: Oliver Neuku <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Patch fixes the incorrect "stream_id" table index instead of
"ep_index" used in cdnsp_get_hw_deq function.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: [email protected]
Signed-off-by: Pawel Laszczak <[email protected]>
Reviewed-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/PH7PR07MB95381F2182688811D5C711CEDD8D2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address.
Cc: stable <[email protected]>
Signed-off-by: Selvarasu Ganesan <[email protected]>
Acked-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
On a system with a GICv3, if a guest hasn't been configured with
GICv3 and that the host is not capable of GICv2 emulation,
a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2.
We therefore try to emulate the SGI access, only to hit a NULL
pointer as no private interrupt is allocated (no GIC, remember?).
The obvious fix is to give the guest what it deserves, in the
shape of a UNDEF exception.
Reported-by: Alexander Potapenko <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
I haven't had time to maintain the UVC gadget driver for a long while.
Dan Scally confirmed he is also in a similar -ENOTIME situation with no
short term hope of fixing that. Being listed as maintainers doesn't help
progress, so mark the driver as orphan to reflect the current state.
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Daniel Scally <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Zenghui reports that VMs backed by hugetlb pages are no longer booting
after commit fd276e71d1e7 ("KVM: arm64: nv: Handle shadow stage 2 page
faults").
Support for shadow stage-2 MMUs introduced the concept of a fault IPA
and canonical IPA to stage-2 fault handling. These are identical in the
non-nested case, as the hardware stage-2 context is always that of the
canonical IPA space.
Both addresses need to be hugepage-aligned when preparing to install a
hugepage mapping to ensure that KVM uses the correct GFN->PFN translation
and installs that at the correct IPA for the current stage-2.
And now I'm feeling thirsty after all this talk of IPAs...
Fixes: fd276e71d1e7 ("KVM: arm64: nv: Handle shadow stage 2 page faults")
Reported-by: Zenghui Yu <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Dell platform, plug headphone or headset, it had a chance to get no
sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
bch2_btree_key_cache_drop() evicts the key cache entry - it's used when
we're doing an update that bypasses the key cache, because for cache
coherency reasons a key can't be in the key cache unless it also exists
in the btree - i.e. creates have to bypass the cache.
After evicting, the path no longer points to a key cache key, and
relock() will always fail if should_be_locked is true.
Prep for improving path->should_be_locked assertions
Signed-off-by: Kent Overstreet <[email protected]>
|
|
ret was assigned twice in check_dirent_to_subvol(). Reported by cocci.
Signed-off-by: Yuesong Li <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>
|
|
bch_dev->io_ref does not protect against the filesystem going away;
bch_fs->writes does.
Thus the filesystem write ref needs to be the last ref we release.
Reported-by: [email protected]
Signed-off-by: Kent Overstreet <[email protected]>
|
|
we allow new fields to be added to existing key types, and new versions
should treat them as being zeroed; this was not handled in
alloc_v4_validate.
Reported-by: [email protected]
Signed-off-by: Kent Overstreet <[email protected]>
|
|
j->last_empty_seq needs to match j->seq when the journal is empty
Reported-by: [email protected]
Signed-off-by: Kent Overstreet <[email protected]>
|
|
seeing an odd bug where we fail to correctly return an error from
.get_tree():
https://syzkaller.appspot.com/bug?extid=c0360e8367d6d8d04a66
we need to be able to distinguish between accidently returning a
positive error (as implied by the log) and no error.
Cc: David Howells <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Reported-by: [email protected]
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Journal replay, in the slowpath where we insert keys in journal order,
was inserting keys in the wrong order; keys from early repair come last.
Reported-by: [email protected]
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Fixes: 7a254053a590 ("bcachefs: support FS_IOC_SETFSLABEL")
Reported-by: [email protected]
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
We weren't always so strict about trans->locked state - but now we are,
and new assertions are shaking some bugs out.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Fix another SRCU splat - this one pretty harmless.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Fixes: 7423330e30ab ("bcachefs: prt_printf() now respects \r\n\t")
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Comparing the wrong bpos - this was missed because normally
bucket_gens_init() runs on brand new filesystems, but this bug caused it
to overwrite bucket_gens keys with 0s when upgrading ancient
filesystems.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
On testing on an old mangled filesystem, we missed a case.
Fixes: bd864bc2d907 ("bcachefs: Fix bch2_trigger_alloc when upgrading from old versions")
Signed-off-by: Kent Overstreet <[email protected]>
|
|
discovered by new trans->locked asserts
Signed-off-by: Kent Overstreet <[email protected]>
|
|
bcachefs_effective.* xattrs show the options inherited from parent
directories (as well as explicitly set); this namespace is not for
setting bcachefs options.
Change the .set() handler to a noop so that if e.g. rsync is copying
xattrs it'll do the right thing, and only copy xattrs in the bcachefs.*
namespace. We don't want to return an error, because that will cause
rsync to bail out or get spammy.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
data_update_init() does a bunch of complicated stuff to decide how many
replicas to add, since we only want to increase an extent's durability
on an explicit rereplicate, but extent pointers may be on devices with
different durability settings.
There was a corner case when evacuating a device that had been set to
durability=0 after data had been written to it, and extents on that
device had already been rereplicated - then evacuate only needs to drop
pointers on that device, not move them.
So the assert for !m->op.nr_replicas was spurious; this was a perfectly
legitimate case that needed to be handled.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Factor out some helpers - this function has gotten much too big.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-20 (ice)
This series contains updates to ice driver only.
Maciej fixes issues with Rx data path on architectures with
PAGE_SIZE >= 8192; correcting page reuse usage and calculations for
last offset and truesize.
Michal corrects assignment of devlink port number to use PF id.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: use internal pf id instead of function number
ice: fix truesize operations for PAGE_SIZE >= 8192
ice: fix ICE_LAST_OFFSET formula
ice: fix page reuse when PAGE_SIZE is over 8k
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT
code path. This should have been removed when we let the page pool
handle the DMA mapping. This bug causes the warning:
WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100
CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu
Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024
RIP: 0010:iommu_dma_unmap_page+0xd5/0x100
Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9
RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c
R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000
R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0
? show_regs+0x6d/0x80
? __warn+0x89/0x150
? iommu_dma_unmap_page+0xd5/0x100
? report_bug+0x16a/0x190
? handle_bug+0x51/0xa0
? exc_invalid_op+0x18/0x80
? iommu_dma_unmap_page+0xd5/0x100
? iommu_dma_unmap_page+0x35/0x100
dma_unmap_page_attrs+0x55/0x220
? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f
bnxt_rx_xdp+0x237/0x520 [bnxt_en]
bnxt_rx_pkt+0x640/0xdd0 [bnxt_en]
__bnxt_poll_work+0x1a1/0x3d0 [bnxt_en]
bnxt_poll+0xaa/0x1e0 [bnxt_en]
__napi_poll+0x33/0x1e0
net_rx_action+0x18a/0x2f0
Fixes: 578fcfd26e2a ("bnxt_en: Let the page pool manage the DMA mapping")
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Kalesh AP <[email protected]>
Signed-off-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Eric Dumazet says:
====================
ipv6: fix possible UAF in output paths
First patch fixes an issue spotted by syzbot, and the two
other patches fix error paths after skb_expand_head()
adoption.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If skb_expand_head() returns NULL, skb has been freed
and the associated dst/idev could also have been freed.
We must use rcu_read_lock() to prevent a possible UAF.
Fixes: 0c9f227bee11 ("ipv6: use skb_expand_head in ip6_xmit")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Vasily Averin <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If skb_expand_head() returns NULL, skb has been freed
and associated dst/idev could also have been freed.
We need to hold rcu_read_lock() to make sure the dst and
associated idev are alive.
Fixes: 5796015fa968 ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Vasily Averin <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
syzbot reported an UAF in ip6_send_skb() [1]
After ip6_local_out() has returned, we no longer can safely
dereference rt, unless we hold rcu_read_lock().
A similar issue has been fixed in commit
a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()")
Another potential issue in ip6_finish_output2() is handled in a
separate patch.
[1]
BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964
Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530
CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964
rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588
rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:745
sock_write_iter+0x2dd/0x400 net/socket.c:1160
do_iter_readv_writev+0x60a/0x890
vfs_writev+0x37c/0xbb0 fs/read_write.c:971
do_writev+0x1b1/0x350 fs/read_write.c:1018
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f936bf79e79
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79
RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004
RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8
</TASK>
Allocated by task 6530:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:312 [inline]
__kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slub.c:3988 [inline]
slab_alloc_node mm/slub.c:4037 [inline]
kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044
dst_alloc+0x12b/0x190 net/core/dst.c:89
ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670
make_blackhole net/xfrm/xfrm_policy.c:3120 [inline]
xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313
ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257
rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2597
___sys_sendmsg net/socket.c:2651 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 45:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
__kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2252 [inline]
slab_free mm/slub.c:4473 [inline]
kmem_cache_free+0x145/0x350 mm/slub.c:4548
dst_destroy+0x2ac/0x460 net/core/dst.c:124
rcu_do_batch kernel/rcu/tree.c:2569 [inline]
rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2843
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
Last potentially related work creation:
kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47
__kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541
__call_rcu_common kernel/rcu/tree.c:3106 [inline]
call_rcu+0x167/0xa70 kernel/rcu/tree.c:3210
refdst_drop include/net/dst.h:263 [inline]
skb_dst_drop include/net/dst.h:275 [inline]
nf_ct_frag6_queue net/ipv6/netfilter/nf_conntrack_reasm.c:306 [inline]
nf_ct_frag6_gather+0xb9a/0x2080 net/ipv6/netfilter/nf_conntrack_reasm.c:485
ipv6_defrag+0x2c8/0x3c0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:67
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
__ip6_local_out+0x6fa/0x800 net/ipv6/output_core.c:143
ip6_local_out+0x26/0x70 net/ipv6/output_core.c:153
ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1959
rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588
rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:745
sock_write_iter+0x2dd/0x400 net/socket.c:1160
do_iter_readv_writev+0x60a/0x890
Fixes: 0625491493d9 ("ipv6: ip6_push_pending_frames() should increment IPSTATS_MIB_OUTDISCARDS")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
netpoll_poll_disable() and netpoll_poll_enable() are only used
from core networking code, there is no need to export them.
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Source the ethtool library from the correct path and avoid the following
error:
./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory
Fixes: 40d269c000bd ("selftests: forwarding: Move several selftests")
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When assembling fraglist GSO packets, udp4_gro_complete does not set
skb->csum_start, which makes the extra validation in __udp_gso_segment fail.
Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr")
Signed-off-by: Felix Fietkau <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ISST: Fix an error-handling corner case
- platform/surface: aggregator: Minor corner case fix and new HW
support
* tag 'platform-drivers-x86-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Fix return value on last invalid resource
platform/surface: aggregator: Fix warning when controller is destroyed in probe
platform/surface: aggregator_registry: Add support for Surface Laptop 6
platform/surface: aggregator_registry: Add fan and thermal sensor support for Surface Laptop 5
platform/surface: aggregator_registry: Add support for Surface Laptop Studio 2
platform/surface: aggregator_registry: Add support for Surface Laptop Go 3
platform/surface: aggregator_registry: Add Support for Surface Pro 10
platform/x86: asus-wmi: Add quirk for ROG Ally X
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"As I mentioned in the merge window pull request, there is a regression
which could cause system hang due to page migration. The corresponding
fix landed upstream through MM tree last week (commit 2e6506e1c4ee:
"mm/migrate: fix deadlock in migrate_pages_batch() on large folios"),
therefore large folios can be safely allowed for compressed inodes and
stress tests have been running on my fleet for over 20 days without
any regression. Users have explicitly requested this for months, so
let's allow large folios for EROFS full cases now for wider testing.
Additionally, there is a fix which addresses invalid memory accesses
on a failure path triggered by fault injection and two minor cleanups
to simplify the codebase.
Summary:
- Allow large folios on compressed inodes
- Fix invalid memory accesses if z_erofs_gbuf_growsize() partially
fails
- Two minor cleanups"
* tag 'erofs-for-6.11-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails
erofs: allow large folios for compressed files
erofs: get rid of check_layout_compatibility()
erofs: simplify readdir operation
|
|
With commit 5b6272e0efd5 ("PCI: qcom: Add OPP support to scale
performance"), OPP was used to control the interconnect and power domains
if the platform supported OPP. Also to maintain the backward compatibility
with platforms not supporting OPP but just ICC, the above mentioned commit
assumed that if ICC was not available on the platform, it would resort to
OPP.
Unfortunately, some old platforms don't support either ICC or OPP. On those
platforms, resorting to OPP in the absence of ICC throws below errors from
OPP core during suspend and resume:
qcom-pcie 1c08000.pcie: dev_pm_opp_set_opp: device opp doesn't exist
qcom-pcie 1c08000.pcie: _find_key: OPP table not found (-19)
Also, it doesn't make sense to invoke the OPP APIs when OPP is not
supported by the platform at all.
Add a "use_pm_opp" flag to identify whether OPP is supported and use it to
control invoking the OPP APIs.
Fixes: 5b6272e0efd5 ("PCI: qcom: Add OPP support to scale performance")
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Mayank Rana <[email protected]>
|