aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-10Merge tag 'usb-5.5-rc6' of ↵Linus Torvalds19-93/+243
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of USB and PHY driver fixes for 5.5-rc6 Nothing all that unusual, just the a bunch of small fixes for a lot of different reported issues. The PHY driver fixes are in here as they interacted with the usb drivers. Full details of the patches are in the shortlog, and all of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) usb: missing parentheses in USE_NEW_SCHEME usb: ohci-da8xx: ensure error return on variable error is set usb: musb: Disable pullup at init usb: musb: fix idling for suspend after disconnect interrupt usb: typec: ucsi: Fix the notification bit offsets USB: Fix: Don't skip endpoint descriptors with maxpacket=0 USB-PD tcpm: bad warning+size, PPS adapters phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz usb: chipidea: host: Disable port power only if previously enabled usb: cdns3: should not use the same dev_id for shared interrupt handler usb: dwc3: gadget: Fix request complete check usb: musb: dma: Correct parameter passed to IRQ handler usb: musb: jz4740: Silence error if code is -EPROBE_DEFER usb: udc: tegra: select USB_ROLE_SWITCH USB: core: fix check for duplicate endpoints phy: cpcap-usb: Drop extra write to usb2 register phy: cpcap-usb: Improve host vs docked mode detection phy: cpcap-usb: Prevent USB line glitches from waking up modem phy: mapphone-mdm6600: Fix uninitialized status value regression phy: cpcap-usb: Fix flakey host idling and enumerating of devices ...
2020-01-10Merge tag 'char-misc-5.5-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single fix, for the chrdev core, for 5.5-rc6 There's been a long-standing race condition triggered by syzbot, and occasionally real people, in the chrdev open() path. Will finally took the time to track it down and fix it for real before the holidays. Here's that one patch, it's been in linux-next for a while with no reported issues and it does fix the reported problem" * tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: chardev: Avoid potential use-after-free in 'chrdev_open()'
2020-01-10Merge tag 'staging-5.5-rc6' of ↵Linus Torvalds9-8/+38
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some small staging driver fixes for 5.5-rc6. Nothing major here, just some small fixes for a comedi driver, the vt6656 driver, and a new device id for the rtl8188eu driver. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21 staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713 staging: vt6656: set usb_set_intfdata on driver fail. staging: vt6656: remove bool from vnt_radio_power_on ret staging: vt6656: limit reg output to block size staging: vt6656: correct return of vnt_init_registers. staging: vt6656: Fix non zero logical return of, usb_control_msg
2020-01-10Merge tag 'tty-5.5-rc6' of ↵Linus Torvalds2-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty/serial driver fixes for 5.5-rc6. The first fixes a much much reported issue with a previous tty port link patch that is in your tree, and the second fixes a problem where the serdev driver would claim ACPI devices that it shouldn't be claiming. Both have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serdev: Don't claim unsupported ACPI serial devices tty: always relink the port
2020-01-10Merge tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds7-30/+30
Pull block fixes from Jens Axboe: "A few fixes that should go into this round. This pull request contains two NVMe fixes via Keith, removal of a dead function, and a fix for the bio op for read truncates (Ming)" * tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block: nvmet: fix per feat data len for get_feature nvme: Translate more status codes to blk_status_t fs: move guard_bio_eod() after bio_set_op_attrs block: remove unused mp_bvec_last_segment
2020-01-10Merge tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds1-12/+0
Pull io_uring fix from Jens Axboe: "Single fix for this series, fixing a regression with the short read handling. This just removes it, as it cannot safely be done for all cases" * tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block: io_uring: remove punt of short reads to async context
2020-01-10Merge tag 'mtd/fixes-for-5.5-rc6' of ↵Linus Torvalds8-28/+65
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD: - sm_ftl: Fix NULL pointer warning. Raw NAND: - Cadence: fix compile testing. - STM32: Avoid locking. Onenand: - Fix several sparse/build warnings. SPI-NOR: - Add a flag to fix interaction with Micron parts" * tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: Fix the writing of the Status Register on micron flashes mtd: sm_ftl: fix NULL pointer warning mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy mtd: onenand: samsung: Fix iomem access with regular memcpy mtd: onenand: omap2: Fix errors in style mtd: cadence: Fix cast to pointer from integer of different size warning mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus
2020-01-10Merge tag 'sound-5.5-rc6' of ↵Linus Torvalds11-29/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few piled ASoC fixes and usual HD-audio and USB-audio fixups. Some of them are for ASoC core error-handling" * tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: enable regmap internal locking ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen ALSA: hda/realtek - Set EAPD control to default for ALC222 ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5 ALSA: hda/realtek - Add new codec supported for ALCS1200A ASoC: Intel: boards: Fix compile-testing RT1011/RT5682 ASoC: SOF: imx8: Fix dsp_box offset ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime() ASoC: fsl_audmix: add missed pm_runtime_disable ASoC: stm32: spdifrx: fix input pin state management ASoC: stm32: spdifrx: fix race condition in irq handler ASoC: stm32: spdifrx: fix inconsistent lock state ASoC: core: Fix access to uninitialized list heads ASoC: soc-core: Set dpcm_playback / dpcm_capture ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free ASoC: SOF: fix fault at driver unload after failed probe
2020-01-10Merge tag 'thermal-v5.5-rc5' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fix from Daniel Lezcano: "Fix backward compatibility with old DTBs on QCOM tsens (Amit Kucheria)" * tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: drivers: thermal: tsens: Work with old DTBs
2020-01-10Merge tag 'pm-5.5-rc6' of ↵Linus Torvalds2-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry Osipenko) and prevent the Intel RAPL power capping driver from crashing during CPU initialization due to a NULL pointer dereference if the processor model in use is not known to it (Harry Pan)" * tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online() cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs
2020-01-10ipv4: Detect rollover in specific fib table dumpDavid Ahern1-0/+6
Sven-Haegar reported looping on fib dumps when 255.255.255.255 route has been added to a table. The looping is caused by the key rolling over from FFFFFFFF to 0. When dumping a specific table only, we need a means to detect when the table dump is done. The key and count saved to cb args are both 0 only at the start of the table dump. If key is 0 and count > 0, then we are in the rollover case. Detect and return to avoid looping. This only affects dumps of a specific table; for dumps of all tables (the case prior to the change in the Fixes tag) inet_dump_fib moved the entry counter to the next table and reset the cb args used by fib_table_dump and fn_trie_dump_leaf, so the rollover ffffffff back to 0 did not cause looping with the dumps. Fixes: effe67926624 ("net: Enable kernel side filtering of route dumps") Reported-by: Sven-Haegar Koch <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-10Merge branch 'stmmac-filtering-fixes'David S. Miller2-6/+18
Jose Abreu says: ==================== net: stmmac: Filtering fixes Two single fixes for the L3 and L4 filtering in stmmac. 1) Updates the internal status of RSS when disabling it in order to keep internal driver status consistent. 2) Do not lets user add a filter if RSS is enabled because the filter will not work correctly as RSS bypasses this mechanism. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-10net: stmmac: tc: Do not setup flower filtering if RSS is enabledJose Abreu1-0/+4
RSS, when enabled, will bypass the L3 and L4 filtering causing it not to work. Add a check before trying to setup the filters. Fixes: 425eabddaf0f ("net: stmmac: Implement L3/L4 Filters using TC Flower") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-10net: stmmac: selftests: Update status when disabling RSSJose Abreu1-6/+14
We are disabling RSS on HW but not updating the internal private status to the 'disabled' state. This is needed for next tc commit that will check if RSS is disabled before trying to apply filters. Fixes: 4647e021193d ("net: stmmac: selftests: Add selftest for L3/L4 Filters") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-10net/tls: fix async operationJakub Kicinski1-2/+2
Mallesham reports the TLS with async accelerator was broken by commit d10523d0b3d7 ("net/tls: free the record on encryption error") because encryption can return -EINPROGRESS in such setups, which should not be treated as an error. The error is also present in the BPF path (likely copied from there). Reported-by: Mallesham Jatharakonda <[email protected]> Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-10net/tls: avoid spurious decryption error with HW resyncJakub Kicinski1-3/+3
When device loses sync mid way through a record - kernel has to re-encrypt the part of the record which the device already decrypted to be able to decrypt and authenticate the record in its entirety. The re-encryption piggy backs on the decryption routine, but obviously because the partially decrypted record can't be authenticated crypto API returns an error which is then ignored by tls_device_reencrypt(). Commit 5c5ec6685806 ("net/tls: add TlsDecryptError stat") added a statistic to count decryption errors, this statistic can't be incremented when we see the expected re-encryption error. Move the inc to the caller. Reported-and-tested-by: David Beckett <[email protected]> Fixes: 5c5ec6685806 ("net/tls: add TlsDecryptError stat") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-10net: bpf: Don't leak time wait and request socketsLorenz Bauer1-5/+4
It's possible to leak time wait and request sockets via the following BPF pseudo code:   sk = bpf_skc_lookup_tcp(...) if (sk) bpf_sk_release(sk) If sk->sk_state is TCP_NEW_SYN_RECV or TCP_TIME_WAIT the refcount taken by bpf_skc_lookup_tcp is not undone by bpf_sk_release. This is because sk_flags is re-used for other data in both kinds of sockets. The check !sock_flag(sk, SOCK_RCU_FREE) therefore returns a bogus result. Check that sk_flags is valid by calling sk_fullsock. Skip checking SOCK_RCU_FREE if we already know that sk is not a full socket. Fixes: edbf8c01de5a ("bpf: add skc_lookup_tcp helper") Fixes: f7355a6c0497 ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()") Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-01-10lib/vdso: Make __cvdso_clock_getres() staticVincenzo Frascino1-0/+1
Fix the following sparse warning in the generic vDSO library: linux/lib/vdso/gettimeofday.c:224:5: warning: symbol '__cvdso_clock_getres' was not declared. Should it be static? Make it static and also mark it __maybe_unsed. Fixes: 502a590a170b ("lib/vdso: Move fallback invocation to the callers") Reported-by: Marc Gonzalez <[email protected]> Signed-off-by: Vincenzo Frascino <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-10nvmet: fix per feat data len for get_featureAmit Engel1-1/+11
The existing implementation for the get_feature admin-cmd does not use per-feature data len. This patch introduces a new helper function nvmet_feat_data_len(), which is used to calculate per feature data len. Right now we only set data len for fid 0x81 (NVME_FEAT_HOST_ID). Fixes: commit e9061c397839 ("nvmet: Remove the data_len field from the nvmet_req struct") Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Amit Engel <[email protected]> [endiness, naming, and kernel style fixes] Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-01-10nvme: Translate more status codes to blk_status_tKeith Busch1-0/+2
Decode interrupted command and not ready namespace nvme status codes to BLK_STS_TARGET. These are not generic IO errors and should use a non-path specific error so that it can use the non-failover retry path. Reported-by: John Meneghini <[email protected]> Cc: Hannes Reinecke <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-01-10HID: hidraw, uhid: Always report EPOLLOUTJiri Kosina2-5/+7
hidraw and uhid device nodes are always available for writing so we should always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when there is nothing to read. Reported-by: Linus Torvalds <[email protected]> Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll") Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll") Signed-off-by: Jiri Kosina <[email protected]>
2020-01-10ASoC: stm32: dfsdm: fix 16 bits recordOlivier Moysan1-6/+6
In stm32_afsdm_pcm_cb function, the transfer size is provided in bytes. However, samples are copied as 16 bits words from iio buffer. Divide by two the transfer size, to copy the right number of samples. Fixes: 1e7f6e1c69f0 ("ASoC: stm32: dfsdm: add 16 bits audio record support") Signed-off-by: Olivier Moysan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-01-10Merge branch 'powercap'Rafael J. Wysocki1-0/+3
* powercap: powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()
2020-01-10scsi: enclosure: Fix stale device oops with hot replugJames Bottomley1-2/+1
Doing an add/remove/add on a SCSI device in an enclosure leads to an oops caused by poisoned values in the enclosure device list pointers. The reason is because we are keeping the enclosure device across the enclosed device add/remove/add but the current code is doing a device_add/device_del/device_add on it. This is the wrong thing to do in sysfs, so fix it by not doing a device_del on the enclosure device simply because of a hot remove of the drive in the slot. [mkp: added missing email addresses] Fixes: 43d8eb9cfd0a ("[SCSI] ses: add support for enclosure component hot removal") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: James Bottomley <[email protected]> Reported-by: Luo Jiaxing <[email protected]> Tested-by: John Garry <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-01-10scsi: sd: Clear sdkp->protection_type if disk is reformatted without PIXiang Chen1-1/+3
If an attached disk with protection information enabled is reformatted to Type 0 the revalidation code does not clear the original protection type and subsequent accesses will keep setting RDPROTECT/WRPROTECT. Set the protection type to 0 if the disk reports PROT_EN=0 in READ CAPACITY(16). [mkp: commit desc] Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Xiang Chen <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-01-09Merge tag 'pstore-v5.5-rc6' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fix from Kees Cook: "Cengiz Can forwarded a Coverity report about more problems with a rare pstore initialization error path, so the allocation lifetime was rearranged to avoid needing to share the kfree() responsibilities between caller and callee" * tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Regularize prz label allocation lifetime
2020-01-09Merge tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds13-61/+85
Pull drm fixes from Dave Airlie: "Pre-LCA pull request I'm not sure how things will look next week, myself and Daniel are at LCA and I'm speaking quite late, so if I get my talk finished I'll probably process fixes. This week has a bunch of i915 fixes, some amdgpu fixes, one sun4i, one core MST, and one core fb_helper fix. More details below: core: - mst Fix NO_STOP_BIT bit offset (Wayne) fb_helper: - fb_helper: Fix bits_per_pixel param set behavior to round up (Geert) sun4i: - Fix RGB_DIV clock min divider on old hardware (Chen-Yu) amdgpu: - Stability fix for raven - Reduce pixel encoding to if max clock is exceeded on HDMI to allow additional high res modes - enable DRIVER_SYNCOBJ_TIMELINE for amdgpu i915: - Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state - Fix GitLab issue #846: Restore coarse power gating that was disabled by initial RC66 context corruption security fixes. - Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms") to avoid screen flicker - Fix to fill in unitialized uabi_instance in virtual engine uAPI - Add two missing W/As for ICL and EHL" * tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded Revert "drm/amdgpu: Set no-retry as default." drm/fb-helper: Round up bits_per_pixel if possible drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model drm/i915/dp: Disable Port sync mode correctly on teardown drm/i915: Add Wa_1407352427:icl,ehl drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl drm/i915/gt: Restore coarse power gating drm/i915/gt: Do not restore invalid RS state drm/i915: Limit audio CDCLK>=2*BCLK constraint back to GLK only drm/i915/gt: Mark up virtual engine uabi_instance drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ
2020-01-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds5-16/+27
Pull rdma fixes from Jason Gunthorpe: "First RDMA subsystem updates for 5.5-rc. A very small set of fixes, most people seem to still be recovering from December! Five small driver fixes: - Fix error flow with MR allocation in bnxt_re - An errata work around for bnxt_re - Misuse of the workqueue API in hfi1 - Protocol error in hfi1 - Regression in 5.5 related to the mmap rework with i40iw" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: i40iw: Remove setting of VMA private data and use rdma_user_mmap_io IB/hfi1: Adjust flow PSN with the correct resync_psn IB/hfi1: Don't cancel unused work item RDMA/bnxt_re: Fix Send Work Entry state check while polling completions RDMA/bnxt_re: Avoid freeing MR resources if dereg fails
2020-01-09Merge branch '40GbE' of ↵David S. Miller11-62/+98
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-01-09 This series contains fixes to e1000e, igb, ixgbe, ixgbevf, i40e and iavf drivers. Brett fixes the validation of the virtchnl queue select bitmaps by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES). Radoslaw removes the limitation of only 10 filter entries for a VF and allows use of all free RAR entries for the forwarding database, if needed. Cambda Zhu fixes the calculation of queue when restoring flow director filters after resetting the adapter for ixgbe. Manfred Rudigier fixes the SGMIISFP module discovery for 100FX/LX modules for igb. Stefan Assmann fixes iavf where during a VF reset event, MAC filters were not altered, which could lead to a stale filter when an administratively set MAC address is forced by the PF. Adam adds the missing code to set the PHY access flag on X722 devices, which supports accessing PHY registers with the admin queue command. Revert a previous commit for e1000e to use "delayed work" which was causing connections to reset unexpectedly and possible driver crashes. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-09net/x25: fix nonblocking connectMartin Schiller1-1/+5
This patch fixes 2 issues in x25_connect(): 1. It makes absolutely no sense to reset the neighbour and the connection state after a (successful) nonblocking call of x25_connect. This prevents any connection from being established, since the response (call accept) cannot be processed. 2. Any further calls to x25_connect() while a call is pending should simply return, instead of creating new Call Request (on different logical channels). This patch should also fix the "KASAN: null-ptr-deref Write in x25_connect" and "BUG: unable to handle kernel NULL pointer dereference in x25_connect" bugs reported by syzbot. Signed-off-by: Martin Schiller <[email protected]> Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: David S. Miller <[email protected]>
2020-01-09sh_eth: check sh_eth_cpu_data::dual_port when dumping registersSergei Shtylyov1-17/+21
When adding the sh_eth_cpu_data::dual_port flag I forgot to add the flag checks to __sh_eth_get_regs(), causing the non-existing TSU registers to be dumped by 'ethtool' on the single port Ether controllers having TSU... Fixes: a94cf2a614f8 ("sh_eth: fix TSU init on SH7734/R8A7740") Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-10Merge tag 'drm-intel-fixes-2020-01-09-1' of ↵Dave Airlie7-31/+38
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state - Fix GitLab issue #846: Restore coarse power gating that was disabled by initial RC66 context corruption security fixes. - Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms") to avoid screen flicker - Fix to fill in unitialized uabi_instance in virtual engine uAPI - Add two missing W/As for ICL and EHL Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-01-09Merge tag 'gpio-v5.5-3' of ↵Linus Torvalds4-10/+54
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here is a host of GPIO fixes for the v5.5 series. The ACPI fix is especially important, see summary below and in the commit for details: - Select GPIOLIB_IRQCHIP on the max77620 GPIO expander - Fix context restore in the Zynq driver - Create a new ACPI quirk handler for disabling wakeups on problematic hardware. - Fix a coding style issue on the mockup device" * tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism gpiolib: acpi: Turn dmi_system_id table into a generic quirk table gpio: zynq: Fix for bug in zynq_gpio_restore_context API gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP gpio: mockup: fix coding style
2020-01-09Merge tag 'pinctrl-v5.5-4' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Two fixes for pin control, not much to say about it, it's just regular driver fixes: - Fix erroneous shift in the Meson driver - Make Lochnagar select the GPIOLIB Kconfig symbol" * tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: meson: Fix wrong shift value when get drive-strength pinctrl: lochnagar: select GPIOLIB
2020-01-09Merge branch 'for-linus' of ↵Linus Torvalds5-25/+43
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few small fixups here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: imx_sc_key - only take the valid data from SCU firmware as key state Input: add safety guards to input_set_keycode() Input: input_event - fix struct padding on sparc64 Input: uinput - always report EPOLLOUT
2020-01-09bpf/sockmap: Read psock ingress_msg before sk_receive_queueLingpeng Chen1-6/+6
Right now in tcp_bpf_recvmsg, sock read data first from sk_receive_queue if not empty than psock->ingress_msg otherwise. If a FIN packet arrives and there's also some data in psock->ingress_msg, the data in psock->ingress_msg will be purged. It is always happen when request to a HTTP1.0 server like python SimpleHTTPServer since the server send FIN packet after data is sent out. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Reported-by: Arika Chen <[email protected]> Suggested-by: Arika Chen <[email protected]> Signed-off-by: Lingpeng Chen <[email protected]> Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-01-09i2c: fix bus recovery stop mode timingRussell King1-3/+10
The I2C specification states that tsu:sto for standard mode timing must be at minimum 4us. Pictographically, this is: SCL: ____/~~~~~~~~~ SDA: _________/~~~~ ->| |<- 4us minimum We are currently waiting 2.5us between asserting SCL and SDA, which is in violation of the standard. Adjust the timings to ensure that we meet what is stipulated as the minimum timings to ensure that all devices correctly interpret the STOP bus transition. This is more important than trying to generate a square wave with even duty cycle. Signed-off-by: Russell King <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-01-09ASoC: stm32: sai: fix possible circular lockingOlivier Moysan1-54/+140
In current driver, locks can be taken as follows: - Register access: take a lock on regmap config and then on clock. - Master clock provider: take a lock on clock and then on regmap config. This can lead to the circular locking summarized below. Remove peripheral clock management through regmap framework, and manage peripheral clock in driver instead. On register access, lock on clock is taken first, which allows to avoid possible locking issue. [ 6696.561513] ====================================================== [ 6696.567670] WARNING: possible circular locking dependency detected [ 6696.573842] 4.19.49 #866 Not tainted [ 6696.577397] ------------------------------------------------------ [ 6696.583566] pulseaudio/6439 is trying to acquire lock: [ 6696.588697] 87b0a25b (enable_lock){..-.}, at: clk_enable_lock+0x64/0x128 [ 6696.595377] [ 6696.595377] but task is already holding lock: [ 6696.601197] d858f825 (stm32_sai_sub:1342:(sai->regmap_config)->lock){....} ... [ 6696.812513] Possible unsafe locking scenario: [ 6696.812513] [ 6696.818418] CPU0 CPU1 [ 6696.822935] ---- ---- [ 6696.827451] lock(stm32_sai_sub:1342:(sai->regmap_config)->lock); [ 6696.833618] lock(enable_lock); [ 6696.839350] lock(stm32_sai_sub:1342: (sai->regmap_config)->lock); [ 6696.848035] lock(enable_lock); Fixes: 03e78a242a15 ("ASoC: stm32: sai: add h7 support") Signed-off-by: Olivier Moysan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-01-09mtd: spi-nor: Fix the writing of the Status Register on micron flashesTudor Ambarus1-0/+1
Micron flashes do not support 16 bit writes on the Status Register. According to micron datasheets, when using the Write Status Register (01h) command, the chip select should be driven LOW and held LOW until the eighth bit of the last data byte has been latched in, after which it must be driven HIGH. If CS is not driven HIGH, the command is not executed, flag status register error bits are not set, and the write enable latch remains set to 1. This fixes the lock operations on micron flashes. Reported-by: John Garry <[email protected]> Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()") Signed-off-by: Tudor Ambarus <[email protected]> Tested-by: John Garry <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-09mtd: sm_ftl: fix NULL pointer warningArnd Bergmann1-1/+2
With gcc -O3, we get a new warning: In file included from arch/arm64/include/asm/processor.h:28, from drivers/mtd/sm_ftl.c:8: In function 'memset', inlined from 'sm_read_sector.constprop' at drivers/mtd/sm_ftl.c:250:3: include/linux/string.h:411:9: error: argument 1 null where non-null expected [-Werror=nonnull] return __builtin_memset(p, c, size); >From all I can tell, this cannot happen (the function is called either with a NULL buffer or with a -1 block number but not both), but adding a check makes it more robust and avoids the warning. Fixes: mmtom ("init/Kconfig: enable -O3 for all arches") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-09mtd: onenand: omap2: Pass correct flags for prep_dma_memcpyPeter Ujfalusi1-1/+2
The commit converting the driver to DMAengine was missing the flags for the memcpy prepare call. It went unnoticed since the omap-dma driver was ignoring them. Fixes: 3ed6a4d1de2c5 (" mtd: onenand: omap2: Convert to use dmaengine for memcp") Reported-by: Aaro Koskinen <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Tested-by: H. Nikolaus Schaller <[email protected]> Tested-by: Aaro Koskinen <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-09mtd: onenand: samsung: Fix iomem access with regular memcpyKrzysztof Kozlowski1-4/+4
The __iomem memory should be copied with memcpy_fromio. This fixes Sparse warnings like: drivers/mtd/nand/onenand/samsung_mtd.c:678:40: warning: incorrect type in argument 2 (different address spaces) drivers/mtd/nand/onenand/samsung_mtd.c:678:40: expected void const *from drivers/mtd/nand/onenand/samsung_mtd.c:678:40: got void [noderef] <asn:2> *[assigned] p drivers/mtd/nand/onenand/samsung_mtd.c:679:19: warning: incorrect type in assignment (different address spaces) drivers/mtd/nand/onenand/samsung_mtd.c:679:19: expected void [noderef] <asn:2> *[assigned] p drivers/mtd/nand/onenand/samsung_mtd.c:679:19: got unsigned char * Reported-by: kbuild test robot <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-09mtd: onenand: omap2: Fix errors in styleAmir Mahdi Ghorbanian3-13/+14
Correct mispelling, spacing, and coding style flaws caught by checkpatch.pl script in the Omap2 Onenand driver . Signed-off-by: Amir Mahdi Ghorbanian <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-09mtd: cadence: Fix cast to pointer from integer of different size warningVasyl Gomonovych1-7/+6
Use dma_addr_t type to pass memory address and control data in DMA descriptor fields memory_pointer and ctrl_data_ptr To fix warning: cast to pointer from integer of different size Signed-off-by: Vasyl Gomonovych <[email protected]> Acked-by: Olof Johansson <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-09mtd: rawnand: stm32_fmc2: avoid to lock the CPU busChristophe Kerello1-2/+36
We are currently using nand_soft_waitrdy to poll the status of the NAND flash. FMC2 enables the wait feature bit (this feature is mandatory for the sequencer mode). By enabling this feature, we can't poll the status of the NAND flash, the read status command is stucked in FMC2 pipeline until R/B# signal is high, and locks the CPU bus. To avoid to lock the CPU bus, we poll FMC2 ISR register. This register reports the status of the R/B# signal. Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Signed-off-by: Christophe Kerello <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-09Merge branch 'for-linus' of ↵Linus Torvalds15-69/+101
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - fix for OOB in hiddev, from Dmitry Torokhov - _poll API fixes for hidraw, from Marcel Holtmann - functional fix for Steam driver, from Rodrigo Rivas Costa - a few new device IDs / device-specific quirks and other assorted smaller fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: steam: Fix input device disappearing HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID drivers/hid/hid-multitouch.c: fix a possible null pointer access. HID: wacom: Recognize new MobileStudio Pro PID HID: intel-ish-hid: ipc: add CMP device id HID: hiddev: fix mess in hiddev_open() HID: hid-input: clear unmapped usages HID: Add quirk for incorrect input length on Lenovo Y720 HID: asus: Ignore Asus vendor-page usage-code 0xff events HID: ite: Add USB id match for Acer SW5-012 keyboard dock HID: Add quirk for Xin-Mo Dual Controller HID: Fix slab-out-of-bounds read in hid_field_extract HID: multitouch: Add LG MELF0410 I2C touchscreen support HID: uhid: Fix returning EPOLLOUT from uhid_char_poll HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds71-275/+515
Pull networking fixes from David Miller: 1) Missing netns pointer init in arp_tables, from Florian Westphal. 2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang. 3) Fix divide by zero in sch_cake, from Wen Yang. 4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl Huang. 5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long. 6) cgroup bpf programs can be released out of order, fix from Roman Gushchin. 7) Make sure stmmac debugfs entry name is changed when device name changes, from Jiping Ma. 8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric Dumazet. 9) SKB leak in lan78xx usb driver, also from Eric Dumazet. 10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq packet scheduler, reject them. From Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) tipc: fix wrong connect() return code tipc: fix link overflow issue at socket shutdown netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present netfilter: conntrack: dccp, sctp: handle null timeout argument atm: eni: fix uninitialized variable warning macvlan: do not assume mac_header is set in macvlan_broadcast() net: sch_prio: When ungrafting, replace with FIFO mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos gtp: fix bad unlock balance in gtp_encap_enable_socket pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM tipc: remove meaningless assignment in Makefile tipc: do not add socket.o to tipc-y twice net: stmmac: dwmac-sun8i: Allow all RGMII modes net: stmmac: dwmac-sunxi: Allow all RGMII modes net: usb: lan78xx: fix possible skb leak net: stmmac: Fixed link does not need MDIO Bus vlan: vlan_changelink() should propagate errors vlan: fix memory leak in vlan_dev_set_egress_priority stmmac: debugfs entry name is not be changed when udev rename device name. ...
2020-01-09e1000e: Revert "e1000e: Make watchdog use delayed work"Jeff Kirsher2-32/+27
This reverts commit 59653e6497d16f7ac1d9db088f3959f57ee8c3db. This is due to this commit causing driver crashes and connections to reset unexpectedly. Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]>
2020-01-09i40e: Set PHY Access flag on X722Adam Ludkiewicz1-0/+5
The X722 FW API version 1.9 adds support for accessing PHY registers with Admin Queue Command. This enables reading EEPROM data from (Q)SFP+ transceivers, what was previously possible only on X710 devices. Signed-off-by: Adam Ludkiewicz <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-01-09iavf: remove current MAC address filter on VF resetStefan Assmann3-4/+18
Currently MAC filters are not altered during a VF reset event. This may lead to a stale filter when an administratively set MAC is forced by the PF. For an administratively set MAC the PF driver deletes the VFs filters, overwrites the VFs MAC address and triggers a VF reset. However the VF driver itself is not aware of the filter removal, which is what the VF reset is for. The VF reset queues all filters present in the VF driver to be re-added to the PF filter list (including the filter for the now stale VF MAC address) and triggers a VIRTCHNL_OP_GET_VF_RESOURCES event, which provides the new MAC address to the VF. When this happens i40e will complain and reject the stale MAC filter, at least in the untrusted VF case. i40e 0000:08:00.0: Setting MAC 3c:fa:fa:fa:fa:01 on VF 0 iavf 0000:08:02.0: Reset warning received from the PF iavf 0000:08:02.0: Scheduling reset task i40e 0000:08:00.0: Bring down and up the VF interface to make this change effective. i40e 0000:08:00.0: VF attempting to override administratively set MAC address, bring down and up the VF interface to resume normal operation i40e 0000:08:00.0: VF 0 failed opcode 10, retval: -1 iavf 0000:08:02.0: Failed to add MAC filter, error IAVF_ERR_NVM To avoid re-adding the stale MAC filter it needs to be removed from the VF driver's filter list before queuing the existing filters. Then during the VIRTCHNL_OP_GET_VF_RESOURCES event the correct filter needs to be added again, at which point the MAC address has been updated. As a bonus this change makes bringing the VF down and up again superfluous for the administratively set MAC case. Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.