aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-15drm/dp_mst: Have DP_Tx send one msg at a timeWayne Lin2-2/+18
[Why] Noticed this while testing MST with the 4 ports MST hub from StarTech.com. Sometimes can't light up monitors normally and get the error message as 'sideband msg build failed'. Look into aux transactions, found out that source sometimes will send out another down request before receiving the down reply of the previous down request. On the other hand, in drm_dp_get_one_sb_msg(), current code doesn't handle the interleaved replies case. Hence, source can't build up message completely and can't light up monitors. [How] For good compatibility, enforce source to send out one down request at a time. Add a flag, is_waiting_for_dwn_reply, to determine if the source can send out a down request immediately or not. - Check the flag before calling process_single_down_tx_qlock to send out a msg - Set the flag when successfully send out a down request - Clear the flag when successfully build up a down reply - Clear the flag when find erros during sending out a down request - Clear the flag when find errors during building up a down reply - Clear the flag when timeout occurs during waiting for a down reply - Use drm_dp_mst_kick_tx() to try to send another down request in queue at the end of drm_dp_mst_wait_tx_reply() (attempt to send out messages in queue when errors occur) Cc: Lyude Paul <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-01-15Merge tag 'batadv-net-for-davem-20200114' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-1/+3
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - Fix DAT candidate selection on little endian systems, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-15bpf: Fix incorrect verifier simulation of ARSH under ALU32Daniel Borkmann3-6/+18
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (85) call bpf_get_socket_cookie#46 1: R0_w=invP(id=0) R10=fp0 1: (57) r0 &= 808464432 2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 2: (14) w0 -= 810299440 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 3: (c4) w0 s>>= 1 4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 4: (76) if w0 s>= 0x30303030 goto pc+216 221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 221: (95) exit processed 6 insns (limit 1000000) [...] Taking a closer look, the program was xlated as follows: # ./bpftool p d x i 12 0: (85) call bpf_get_socket_cookie#7800896 1: (bf) r6 = r0 2: (57) r6 &= 808464432 3: (14) w6 -= 810299440 4: (c4) w6 s>>= 1 5: (76) if w6 s>= 0x30303030 goto pc+216 6: (05) goto pc-1 7: (05) goto pc-1 8: (05) goto pc-1 [...] 220: (05) goto pc-1 221: (05) goto pc-1 222: (95) exit Meaning, the visible effect is very similar to f54c7898ed1c ("bpf: Fix precision tracking for unbounded scalars"), that is, the fall-through branch in the instruction 5 is considered to be never taken given the conclusion from the min/max bounds tracking in w6, and therefore the dead-code sanitation rewrites it as goto pc-1. However, real-life input disagrees with verification analysis since a soft-lockup was observed. The bug sits in the analysis of the ARSH. The definition is that we shift the target register value right by K bits through shifting in copies of its sign bit. In adjust_scalar_min_max_vals(), we do first coerce the register into 32 bit mode, same happens after simulating the operation. However, for the case of simulating the actual ARSH, we don't take the mode into account and act as if it's always 64 bit, but location of sign bit is different: dst_reg->smin_value >>= umin_val; dst_reg->smax_value >>= umin_val; dst_reg->var_off = tnum_arshift(dst_reg->var_off, umin_val); Consider an unknown R0 where bpf_get_socket_cookie() (or others) would for example return 0xffff. With the above ARSH simulation, we'd see the following results: [...] 1: R1=ctx(id=0,off=0,imm=0) R2_w=invP65535 R10=fp0 1: (85) call bpf_get_socket_cookie#46 2: R0_w=invP(id=0) R10=fp0 2: (57) r0 &= 808464432 -> R0_runtime = 0x3030 3: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 3: (14) w0 -= 810299440 -> R0_runtime = 0xcfb40000 4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 (0xffffffff) 4: (c4) w0 s>>= 1 -> R0_runtime = 0xe7da0000 5: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 (0x67c00000) (0x7ffbfff8) [...] In insn 3, we have a runtime value of 0xcfb40000, which is '1100 1111 1011 0100 0000 0000 0000 0000', the result after the shift has 0xe7da0000 that is '1110 0111 1101 1010 0000 0000 0000 0000', where the sign bit is correctly retained in 32 bit mode. In insn4, the umax was 0xffffffff, and changed into 0x7ffbfff8 after the shift, that is, '0111 1111 1111 1011 1111 1111 1111 1000' and means here that the simulation didn't retain the sign bit. With above logic, the updates happen on the 64 bit min/max bounds and given we coerced the register, the sign bits of the bounds are cleared as well, meaning, we need to force the simulation into s32 space for 32 bit alu mode. Verification after the fix below. We're first analyzing the fall-through branch on 32 bit signed >= test eventually leading to rejection of the program in this specific case: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r2 = 808464432 1: R1=ctx(id=0,off=0,imm=0) R2_w=invP808464432 R10=fp0 1: (85) call bpf_get_socket_cookie#46 2: R0_w=invP(id=0) R10=fp0 2: (bf) r6 = r0 3: R0_w=invP(id=0) R6_w=invP(id=0) R10=fp0 3: (57) r6 &= 808464432 4: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 4: (14) w6 -= 810299440 5: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 5: (c4) w6 s>>= 1 6: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0 (0x67c00000) (0xfffbfff8) 6: (76) if w6 s>= 0x30303030 goto pc+216 7: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0 7: (30) r0 = *(u8 *)skb[808464432] BPF_LD_[ABS|IND] uses reserved fields processed 8 insns (limit 1000000) [...] Fixes: 9cbe1f5a32dc ("bpf/verifier: improve register value range tracking with ARSH") Reported-by: Anatoly Trosinenko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-01-15hv_netvsc: Fix memory leak when removing rndis deviceMohammed Gamal1-2/+0
kmemleak detects the following memory leak when hot removing a network device: unreferenced object 0xffff888083f63600 (size 256): comm "kworker/0:1", pid 12, jiffies 4294831717 (age 1113.676s) hex dump (first 32 bytes): 00 40 c7 33 80 88 ff ff 00 00 00 00 10 00 00 00 [email protected]............ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<00000000d4a8f5be>] rndis_filter_device_add+0x117/0x11c0 [hv_netvsc] [<000000009c02d75b>] netvsc_probe+0x5e7/0xbf0 [hv_netvsc] [<00000000ddafce23>] vmbus_probe+0x74/0x170 [hv_vmbus] [<00000000046e64f1>] really_probe+0x22f/0xb50 [<000000005cc35eb7>] driver_probe_device+0x25e/0x370 [<0000000043c642b2>] bus_for_each_drv+0x11f/0x1b0 [<000000005e3d09f0>] __device_attach+0x1c6/0x2f0 [<00000000a72c362f>] bus_probe_device+0x1a6/0x260 [<0000000008478399>] device_add+0x10a3/0x18e0 [<00000000cf07b48c>] vmbus_device_register+0xe7/0x1e0 [hv_vmbus] [<00000000d46cf032>] vmbus_add_channel_work+0x8ab/0x1770 [hv_vmbus] [<000000002c94bb64>] process_one_work+0x919/0x17d0 [<0000000096de6781>] worker_thread+0x87/0xb40 [<00000000fbe7397e>] kthread+0x333/0x3f0 [<000000004f844269>] ret_from_fork+0x3a/0x50 rndis_filter_device_add() allocates an instance of struct rndis_device which never gets deallocated as rndis_filter_device_remove() sets net_device->extension which points to the rndis_device struct to NULL, leaving the rndis_device dangling. Since net_device->extension is eventually freed in free_netvsc_device(), we refrain from setting it to NULL inside rndis_filter_device_remove() Signed-off-by: Mohammed Gamal <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-15tcp: fix marked lost packets not being retransmittedPengcheng Yang1-3/+4
When the packet pointed to by retransmit_skb_hint is unlinked by ACK, retransmit_skb_hint will be set to NULL in tcp_clean_rtx_queue(). If packet loss is detected at this time, retransmit_skb_hint will be set to point to the current packet loss in tcp_verify_retransmit_hint(), then the packets that were previously marked lost but not retransmitted due to the restriction of cwnd will be skipped and cannot be retransmitted. To fix this, when retransmit_skb_hint is NULL, retransmit_skb_hint can be reset only after all marked lost packets are retransmitted (retrans_out >= lost_out), otherwise we need to traverse from tcp_rtx_queue_head in tcp_xmit_retransmit_queue(). Packetdrill to demonstrate: // Disable RACK and set max_reordering to keep things simple 0 `sysctl -q net.ipv4.tcp_recovery=0` +0 `sysctl -q net.ipv4.tcp_max_reordering=3` // Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 8 data segments +0 write(4, ..., 8000) = 8000 +0 > P. 1:8001(8000) ack 1 // Enter recovery and 1:3001 is marked lost +.01 < . 1:1(0) ack 1 win 257 <sack 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:6001 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:7001 3001:4001,nop,nop> // Retransmit 1:1001, now retransmit_skb_hint points to 1001:2001 +0 > . 1:1001(1000) ack 1 // 1001:2001 was ACKed causing retransmit_skb_hint to be set to NULL +.01 < . 1:1(0) ack 2001 win 257 <sack 5001:8001 3001:4001,nop,nop> // Now retransmit_skb_hint points to 4001:5001 which is now marked lost // BUG: 2001:3001 was not retransmitted +0 > . 2001:3001(1000) ack 1 Signed-off-by: Pengcheng Yang <[email protected]> Acked-by: Neal Cardwell <[email protected]> Tested-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-15ALSA: seq: Fix racy access for queue timer in proc readTakashi Iwai1-5/+9
snd_seq_info_timer_read() reads the information of the timer assigned for each queue, but it's done in a racy way which may lead to UAF as spotted by syzkaller. This patch applies the missing q->timer_mutex lock while accessing the timer object as well as a slight code change to adapt the standard coding style. Reported-by: [email protected] Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-01-15Fix built-in early-load Intel microcode alignmentJari Ruusu1-1/+1
Intel Software Developer's Manual, volume 3, chapter 9.11.6 says: "Note that the microcode update must be aligned on a 16-byte boundary and the size of the microcode update must be 1-KByte granular" When early-load Intel microcode is loaded from initramfs, userspace tool 'iucode_tool' has already 16-byte aligned those microcode bits in that initramfs image. Image that was created something like this: iucode_tool --write-earlyfw=FOO.cpio microcode-files... However, when early-load Intel microcode is loaded from built-in firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that 16-byte alignment is not guaranteed. Fix this by forcing all built-in firmware BLOBs to 16-byte alignment. [ If we end up having other firmware with much bigger alignment requirements, we might need to introduce some method for the firmware to specify it, this is the minimal "just increase the alignment a bit to account for this one special case" patch - Linus ] Signed-off-by: Jari Ruusu <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-01-15Merge branch 'for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull arch/nios2 fixlet from Ley Foon Tan: "Update my nios2 maintainer email" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: MAINTAINERS: Update Ley Foon Tan's email address
2020-01-15i2c: iop3xx: Fix memory leak in probe error pathKrzysztof Kozlowski1-4/+8
When handling devm_gpiod_get_optional() errors, free the memory already allocated. This fixes Smatch warnings: drivers/i2c/busses/i2c-iop3xx.c:437 iop3xx_i2c_probe() warn: possible memory leak of 'new_adapter' drivers/i2c/busses/i2c-iop3xx.c:442 iop3xx_i2c_probe() warn: possible memory leak of 'new_adapter' Fixes: fdb7e884ad61 ("i2c: iop: Use GPIO descriptors") Reported-by: kbuild test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-01-15Merge tag 'platform-drivers-x86-v5.5-3' of ↵Linus Torvalds7-27/+46
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: - Fix keyboard brightness control for ASUS laptops - Better handling parameters of GPD pocket fan module to avoid thermal shock - Add IDs to PMC platform driver to support Intel Comet Lake - Fix potential dead lock in Mellanox TM FIFO driver and ABI documentation * tag 'platform-drivers-x86-v5.5-3' of git://git.infradead.org/linux-platform-drivers-x86: Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0 platform/x86: intel_pmc_core: update Comet Lake platform driver platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits platform/x86: GPD pocket fan: Use default values when wrong modparams are given platform/mellanox: fix potential deadlock in the tmfifo driver platform/x86: intel-ips: Use the correct style for SPDX License Identifier
2020-01-15Merge branch 'linus' of ↵Linus Torvalds3-11/+21
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a build problem for the hisilicon driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hisilicon/sec2 - Use atomics instead of __sync
2020-01-15Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds3-80/+13
Pull vfs fixes from Al Viro: "Fixes for mountpoint_last() bugs (by converting to use of lookup_last()) and an autofs regression fix from this cycle (caused by follow_managed() breakage introduced in barrier fixes series)" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix autofs regression caused by follow_managed() changes reimplement path_mountpoint() with less magic
2020-01-15i2c: tegra: Properly disable runtime PM on driver's probe errorDmitry Osipenko1-10/+19
One of the recent Tegra I2C commits made a change that resumes runtime PM during driver's probe, but it missed to put the RPM in a case of error. Note that it's not correct to use pm_runtime_status_suspended because it breaks RPM refcounting. Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase") Cc: <[email protected]> # v5.4+ Tested-by: Thierry Reding <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-01-15i2c: tegra: Fix suspending in active runtime PM stateDmitry Osipenko1-0/+9
I noticed that sometime I2C clock is kept enabled during suspend-resume. This happens because runtime PM defers dynamic suspension and thus it may happen that runtime PM is in active state when system enters into suspend. In particular I2C controller that is used for CPU's DVFS is often kept ON during suspend because CPU's voltage scaling happens quite often. Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase") Cc: <[email protected]> # v5.4+ Tested-by: Thierry Reding <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-01-15null_blk: Fix zone write handlingDamien Le Moal1-1/+3
null_zone_write() only allows writing empty and implicitly opened zones. Writing to closed and explicitly opened zones must also be allowed and the zone condition must be transitioned to implicit open if the zone is not explicitly opened already. Fixes: da644b2cc1a4 ("null_blk: add zone open, close, and finish support") Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-01-15staging: comedi: ni_routes: allow partial routing informationIan Abbott1-6/+3
This patch fixes a regression on setting up asynchronous commands to use external trigger sources when board-specific routing information is missing. `ni_find_device_routes()` (called via `ni_assign_device_routes()`) finds the table of register values for the device family and the set of valid routes for the specific board. If both are found, `tables->route_values` is set to point to the table of register values for the device family and `tables->valid_routes` is set to point to the list of valid routes for the specific board. If either is not found, both `tables->route_values` and `tables->valid_routes` are left set at their initial null values (initialized by `ni_assign_device_routes()`) and the function returns `-ENODATA`. Returning an error results in some routing functionality being disabled. Unfortunately, leaving `table->route_values` set to `NULL` also breaks the setting up of asynchronous commands that are configured to use external trigger sources. Calls to `ni_check_trigger_arg()` or `ni_check_trigger_arg_roffs()` while checking the asynchronous command set-up would result in a null pointer dereference if `table->route_values` is `NULL`. The null pointer dereference is fixed in another patch, but it now results in failure to set up the asynchronous command. That is a regression from the behavior prior to commit 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing") and commit 56d0b826d39f ("staging: comedi: ni_mio_common: implement new routing for TRIG_EXT"). Change `ni_find_device_routes()` to set `tables->route_values` and/or `tables->valid_routes` to valid information even if the other one can only be set to `NULL` due to missing information. The function will still return an error in that case. This should result in `tables->valid_routes` being valid for all currently supported device families even if the board-specific routing information is missing. That should be enough to fix the regression on setting up asynchronous commands to use external triggers for boards with missing routing information. Fixes: 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing") Fixes: 56d0b826d39f ("staging: comedi: ni_mio_common: implement new routing for TRIG_EXT"). Cc: <[email protected]> # 4.20+ Cc: Spencer E. Olson <[email protected]> Signed-off-by: Ian Abbott <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-15staging: comedi: ni_routes: fix null dereference in ni_find_route_source()Ian Abbott1-0/+3
In `ni_find_route_source()`, `tables->route_values` gets dereferenced. However it is possible that `tables->route_values` is `NULL`, leading to a null pointer dereference. `tables->route_values` will be `NULL` if the call to `ni_assign_device_routes()` during board initialization returned an error due to missing device family routing information or missing board-specific routing information. For example, there is currently no board-specific routing information provided for the PCIe-6251 board and several other boards, so those are affected by this bug. The bug is triggered when `ni_find_route_source()` is called via `ni_check_trigger_arg()` or `ni_check_trigger_arg_roffs()` when checking the arguments for setting up asynchronous commands. Fix it by returning `-EINVAL` if `tables->route_values` is `NULL`. Even with this fix, setting up asynchronous commands to use external trigger sources for boards with missing routing information will still fail gracefully. Since `ni_find_route_source()` only depends on the device family routing information, it would be better if that was made available even if the board-specific routing information is missing. That will be addressed by another patch. Fixes: 4bb90c87abbe ("staging: comedi: add interface to ni routing table information") Cc: <[email protected]> # 4.20+ Cc: Spencer E. Olson <[email protected]> Signed-off-by: Ian Abbott <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-15Merge branch 'mlxsw-Various-fixes'David S. Miller4-33/+76
Ido Schimmel says: ==================== mlxsw: Various fixes This patch set contains various fixes for mlxsw. Patch #1 splits the init() callback between Spectrum-2 and Spectrum-3 in order to avoid enforcing the same firmware version for both ASICs, as this can't possibly work. Without this patch the driver cannot boot with the Spectrum-3 ASIC. Patches #2-#3 fix a long standing race condition that was recently exposed while testing the driver on an emulator, which is very slow compared to the actual hardware. The problem is explained in detail in the commit messages. Patch #4 fixes a selftest. Patch #5 prevents offloaded qdiscs from presenting a non-zero backlog to the user when the netdev is down. This is done by clearing the cached backlog in the driver when the netdev goes down. Patch #6 fixes qdisc statistics (backlog and tail drops) to also take into account the multicast traffic classes. v2: * Patches #2-#3: use skb_cow_head() instead of skb_unshare() as suggested by Jakub. Remove unnecessary check regarding headroom * Patches #5-#6: new ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-15mlxsw: spectrum_qdisc: Include MC TCs in Qdisc countersPetr Machata1-7/+23
mlxsw configures Spectrum in such a way that BUM traffic is passed not through its nominal traffic class TC, but through its MC counterpart TC+8. However, when collecting statistics, Qdiscs only look at the nominal TC and ignore the MC TC. Add two helpers to compute the value for logical TC from the constituents, one for backlog, the other for tail drops. Use them throughout instead of going through the xstats pointer directly. Counters for TX bytes and packets are deduced from packet priority counters, and therefore already include BUM traffic. wred_drop counter is irrelevant on MC TCs, because RED is not enabled on them. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-15mlxsw: spectrum: Wipe xstats.backlog of down portsPetr Machata1-0/+13
Per-port counter cache used by Qdiscs is updated periodically, unless the port is down. The fact that the cache is not updated for down ports is no problem for most counters, which are relative in nature. However, backlog is absolute in nature, and if there is a non-zero value in the cache around the time that the port goes down, that value just stays there. This value then leaks to offloaded Qdiscs that report non-zero backlog even if there (obviously) is no traffic. The HW does not keep backlog of a downed port, so do likewise: as the port goes down, wipe the backlog value from xstats. Fixes: 075ab8adaf4e ("mlxsw: spectrum: Collect tclass related stats periodically") Signed-off-by: Petr Machata <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-15selftests: mlxsw: qos_mc_aware: Fix mausezahn invocationPetr Machata1-2/+6
Mausezahn does not recognize "own" as a keyword on source IP address. As a result, the MC stream is not running at all, and therefore no UC degradation can be observed even in principle. Fix the invocation, and tighten the test: due to the minimum shaper configured at the MC TCs, we always expect about 20% degradation. Fail the test if it is lower. Fixes: 573363a68f27 ("selftests: mlxsw: Add qos_lib.sh") Signed-off-by: Petr Machata <[email protected]> Reported-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-15mlxsw: switchx2: Do not modify cloned SKBs during xmitIdo Schimmel1-11/+6
The driver needs to prepend a Tx header to each packet it is transmitting. The header includes information such as the egress port and traffic class. The addition of the header requires the driver to modify the SKB's header and therefore it must not be shared. Otherwise, we risk hitting various race conditions. For example, when a packet is flooded (cloned) by the bridge driver to two switch ports swp1 and swp2: t0 - mlxsw_sp_port_xmit() is called for swp1. Tx header is prepended with swp1's port number t1 - mlxsw_sp_port_xmit() is called for swp2. Tx header is prepended with swp2's port number, overwriting swp1's port number t2 - The device processes data buffer from t0. Packet is transmitted via swp2 t3 - The device processes data buffer from t1. Packet is transmitted via swp2 Usually, the device is fast enough and transmits the packet before its Tx header is overwritten, but this is not the case in emulated environments. Fix this by making sure the SKB's header is writable by calling skb_cow_head(). Since the function ensures we have headroom to push the Tx header, the check further in the function can be removed. v2: * Use skb_cow_head() instead of skb_unshare() as suggested by Jakub * Remove unnecessary check regarding headroom Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Shalom Toledo <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-15mlxsw: spectrum: Do not modify cloned SKBs during xmitIdo Schimmel1-12/+6
The driver needs to prepend a Tx header to each packet it is transmitting. The header includes information such as the egress port and traffic class. The addition of the header requires the driver to modify the SKB's header and therefore it must not be shared. Otherwise, we risk hitting various race conditions. For example, when a packet is flooded (cloned) by the bridge driver to two switch ports swp1 and swp2: t0 - mlxsw_sp_port_xmit() is called for swp1. Tx header is prepended with swp1's port number t1 - mlxsw_sp_port_xmit() is called for swp2. Tx header is prepended with swp2's port number, overwriting swp1's port number t2 - The device processes data buffer from t0. Packet is transmitted via swp2 t3 - The device processes data buffer from t1. Packet is transmitted via swp2 Usually, the device is fast enough and transmits the packet before its Tx header is overwritten, but this is not the case in emulated environments. Fix this by making sure the SKB's header is writable by calling skb_cow_head(). Since the function ensures we have headroom to push the Tx header, the check further in the function can be removed. v2: * Use skb_cow_head() instead of skb_unshare() as suggested by Jakub * Remove unnecessary check regarding headroom Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Shalom Toledo <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-15mlxsw: spectrum: Do not enforce same firmware version for multiple ASICsIdo Schimmel1-1/+22
In commit a72afb6879bb ("mlxsw: Enforce firmware version for Spectrum-2") I added a required firmware version for Spectrum-2, but missed the fact that mlxsw_sp2_init() is used by both Spectrum-2 and Spectrum-3. This means that the same firmware version will be used for both, which is wrong. Fix this by creating a new init() callback for Spectrum-3. Fixes: a72afb6879bb ("mlxsw: Enforce firmware version for Spectrum-2") Signed-off-by: Ido Schimmel <[email protected]> Acked-by: Jiri Pirko <[email protected]> Tested-by: Shalom Toledo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-15usb: core: hub: Improved device recognition on remote wakeupKeiya Nobuta1-0/+1
If hub_activate() is called before D+ has stabilized after remote wakeup, the following situation might occur: __ ___________________ / \ / D+ __/ \__/ Hub _______________________________ | ^ ^ ^ | | | | Host _____v__|___|___________|______ | | | | | | | \-- Interrupt Transfer (*3) | | \-- ClearPortFeature (*2) | \-- GetPortStatus (*1) \-- Host detects remote wakeup - D+ goes high, Host starts running by remote wakeup - D+ is not stable, goes low - Host requests GetPortStatus at (*1) and gets the following hub status: - Current Connect Status bit is 0 - Connect Status Change bit is 1 - D+ stabilizes, goes high - Host requests ClearPortFeature and thus Connect Status Change bit is cleared at (*2) - After waiting 100 ms, Host starts the Interrupt Transfer at (*3) - Since the Connect Status Change bit is 0, Hub returns NAK. In this case, port_event() is not called in hub_event() and Host cannot recognize device. To solve this issue, flag change_bits even if only Connect Status Change bit is 1 when got in the first GetPortStatus. This issue occurs rarely because it only if D+ changes during a very short time between GetPortStatus and ClearPortFeature. However, it is fatal if it occurs in embedded system. Signed-off-by: Keiya Nobuta <[email protected]> Cc: stable <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-15Merge tag 'mac80211-for-net-2020-01-15' of ↵David S. Miller11-12/+106
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few fixes: * -O3 enablement fallout, thanks to Arnd who ran this * fixes for a few leaks, thanks to Felix * channel 12 regulatory fix for custom regdomains * check for a crash reported by syzbot (NULL function is called on drivers that don't have it) * fix TKIP replay protection after setup with some APs (from Jouni) * restrict obtaining some mesh data to avoid WARN_ONs * fix deadlocks with auto-disconnect (socket owner) * fix radar detection events with multiple devices ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-15xfrm: support output_mark for offload ESP packetsUlrich Weber2-0/+4
Commit 9b42c1f179a6 ("xfrm: Extend the output_mark") added output_mark support but missed ESP offload support. xfrm_smark_get() is not called within xfrm_input() for packets coming from esp4_gro_receive() or esp6_gro_receive(). Therefore call xfrm_smark_get() directly within these functions. Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking.") Signed-off-by: Ulrich Weber <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-01-15x86/mce/therm_throt: Do not access uninitialized therm_workChuansheng Liu1-4/+5
It is relatively easy to trigger the following boot splat on an Ice Lake client platform. The call stack is like: kernel BUG at kernel/timer/timer.c:1152! Call Trace: __queue_delayed_work queue_delayed_work_on therm_throt_process intel_thermal_interrupt ... The reason is that a CPU's thermal interrupt is enabled prior to executing its hotplug onlining callback which will initialize the throttling workqueues. Such a race can lead to therm_throt_process() accessing an uninitialized therm_work, leading to the above BUG at a very early bootup stage. Therefore, unmask the thermal interrupt vector only after having setup the workqueues completely. [ bp: Heavily massage commit message and correct comment formatting. ] Fixes: f6656208f04e ("x86/mce/therm_throt: Optimize notifications of thermal throttle") Signed-off-by: Chuansheng Liu <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Tony Luck <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-01-15Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"Kevin Hao2-57/+107
This reverts commit a7fc89f9d5fcc10a5474cfe555f5a9e5df8b0f1f because there are some bugs in this commit, and we don't have a simple way to fix these bugs. So revert this commit to make the thunderx gpio work on the stable kernel at least. We will switch to GPIOLIB_IRQCHIP for thunderx gpio by following patches. Fixes: a7fc89f9d5fc ("gpio: thunderx: Switch to GPIOLIB_IRQCHIP") Signed-off-by: Kevin Hao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2020-01-15tick/sched: Annotate lockless access to last_jiffies_updateEric Dumazet1-5/+9
syzbot (KCSAN) reported a data-race in tick_do_update_jiffies64(): BUG: KCSAN: data-race in tick_do_update_jiffies64 / tick_do_update_jiffies64 write to 0xffffffff8603d008 of 8 bytes by interrupt on cpu 1: tick_do_update_jiffies64+0x100/0x250 kernel/time/tick-sched.c:73 tick_sched_do_timer+0xd4/0xe0 kernel/time/tick-sched.c:138 tick_sched_timer+0x43/0xe0 kernel/time/tick-sched.c:1292 __run_hrtimer kernel/time/hrtimer.c:1514 [inline] __hrtimer_run_queues+0x274/0x5f0 kernel/time/hrtimer.c:1576 hrtimer_interrupt+0x22a/0x480 kernel/time/hrtimer.c:1638 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1110 [inline] smp_apic_timer_interrupt+0xdc/0x280 arch/x86/kernel/apic/apic.c:1135 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 arch_local_irq_restore arch/x86/include/asm/paravirt.h:756 [inline] kcsan_setup_watchpoint+0x1d4/0x460 kernel/kcsan/core.c:436 check_access kernel/kcsan/core.c:466 [inline] __tsan_read1 kernel/kcsan/core.c:593 [inline] __tsan_read1+0xc2/0x100 kernel/kcsan/core.c:593 kallsyms_expand_symbol.constprop.0+0x70/0x160 kernel/kallsyms.c:79 kallsyms_lookup_name+0x7f/0x120 kernel/kallsyms.c:170 insert_report_filterlist kernel/kcsan/debugfs.c:155 [inline] debugfs_write+0x14b/0x2d0 kernel/kcsan/debugfs.c:256 full_proxy_write+0xbd/0x100 fs/debugfs/file.c:225 __vfs_write+0x67/0xc0 fs/read_write.c:494 vfs_write fs/read_write.c:558 [inline] vfs_write+0x18a/0x390 fs/read_write.c:542 ksys_write+0xd5/0x1b0 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x4c/0x60 fs/read_write.c:620 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffffffff8603d008 of 8 bytes by task 0 on cpu 0: tick_do_update_jiffies64+0x2b/0x250 kernel/time/tick-sched.c:62 tick_nohz_update_jiffies kernel/time/tick-sched.c:505 [inline] tick_nohz_irq_enter kernel/time/tick-sched.c:1257 [inline] tick_irq_enter+0x139/0x1c0 kernel/time/tick-sched.c:1274 irq_enter+0x4f/0x60 kernel/softirq.c:354 entering_irq arch/x86/include/asm/apic.h:517 [inline] entering_ack_irq arch/x86/include/asm/apic.h:523 [inline] smp_apic_timer_interrupt+0x55/0x280 arch/x86/kernel/apic/apic.c:1133 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:60 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 rest_init+0xec/0xf6 init/main.c:452 arch_call_rest_init+0x17/0x37 start_kernel+0x838/0x85e init/main.c:786 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Use READ_ONCE() and WRITE_ONCE() to annotate this expected race. Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-15cfg80211: fix page refcount issue in A-MSDU decapFelix Fietkau1-1/+1
The fragments attached to a skb can be part of a compound page. In that case, page_ref_inc will increment the refcount for the wrong page. Fix this by using get_page instead, which calls page_ref_inc on the compound head and also checks for overflow. Fixes: 2b67f944f88c ("cfg80211: reuse existing page fragments in A-MSDU rx") Cc: [email protected] Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-01-15cfg80211: check for set_wiphy_paramsJohannes Berg1-0/+4
Check if set_wiphy_params is assigned and return an error if not, some drivers (e.g. virt_wifi where syzbot reported it) don't have it. Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Johannes Berg <[email protected]> Link: https://lore.kernel.org/r/20200113125358.ac07f276efff.Ibd85ee1b12e47b9efb00a2adc5cd3fac50da791a@changeid Signed-off-by: Johannes Berg <[email protected]>
2020-01-15cfg80211: fix memory leak in cfg80211_cqm_rssi_updateFelix Fietkau1-0/+1
The per-tid statistics need to be released after the call to rdev_get_station Cc: [email protected] Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-01-15cfg80211: fix memory leak in nl80211_probe_mesh_linkFelix Fietkau1-0/+2
The per-tid statistics need to be released after the call to rdev_get_station Cc: [email protected] Fixes: 5ab92e7fe49a ("cfg80211: add support to probe unexercised mesh link") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-01-15cfg80211: fix deadlocks in autodisconnect workMarkus Theil1-3/+3
Use methods which do not try to acquire the wdev lock themselves. Cc: [email protected] Fixes: 37b1c004685a3 ("cfg80211: Support all iftypes in autodisconnect_wk") Signed-off-by: Markus Theil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-01-15wireless: wext: avoid gcc -O3 warningArnd Bergmann1-1/+2
After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the wext code produces a bogus warning: In function 'iw_handler_get_iwstats', inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9, inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10, inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8, inlined from 'wext_handle_ioctl': net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull] memcpy(extra, stats, sizeof(struct iw_statistics)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from arch/x86/include/asm/string.h:5, net/wireless/wext-core.c: In function 'wext_handle_ioctl': arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here The problem is that ioctl_standard_call() sometimes calls the handler with a NULL argument that would cause a problem for iw_handler_get_iwstats. However, iw_handler_get_iwstats never actually gets called that way. Marking that function as noinline avoids the warning and leads to slightly smaller object code as well. Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-01-15mac80211: Fix TKIP replay protection immediately after key setupJouni Malinen1-3/+15
TKIP replay protection was skipped for the very first frame received after a new key is configured. While this is potentially needed to avoid dropping a frame in some cases, this does leave a window for replay attacks with group-addressed frames at the station side. Any earlier frame sent by the AP using the same key would be accepted as a valid frame and the internal RSC would then be updated to the TSC from that frame. This would allow multiple previously transmitted group-addressed frames to be replayed until the next valid new group-addressed frame from the AP is received by the station. Fix this by limiting the no-replay-protection exception to apply only for the case where TSC=0, i.e., when this is for the very first frame protected using the new key, and the local RSC had not been set to a higher value when configuring the key (which may happen with GTK). Signed-off-by: Jouni Malinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-01-15cfg80211: Fix radar event during another phy CACOrr Mazor5-1/+65
In case a radar event of CAC_FINISHED or RADAR_DETECTED happens during another phy is during CAC we might need to cancel that CAC. If we got a radar in a channel that another phy is now doing CAC on then the CAC should be canceled there. If, for example, 2 phys doing CAC on the same channels, or on comptable channels, once on of them will finish his CAC the other might need to cancel his CAC, since it is no longer relevant. To fix that the commit adds an callback and implement it in mac80211 to end CAC. This commit also adds a call to said callback if after a radar event we see the CAC is no longer relevant Signed-off-by: Orr Mazor <[email protected]> Reviewed-by: Sergey Matyukevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] [slightly reformat/reword commit message] Signed-off-by: Johannes Berg <[email protected]>
2020-01-15wireless: fix enabling channel 12 for custom regulatory domainGanapathi Bhat1-3/+10
Commit e33e2241e272 ("Revert "cfg80211: Use 5MHz bandwidth by default when checking usable channels"") fixed a broken regulatory (leaving channel 12 open for AP where not permitted). Apply a similar fix to custom regulatory domain processing. Signed-off-by: Cathy Luo <[email protected]> Signed-off-by: Ganapathi Bhat <[email protected]> Link: https://lore.kernel.org/r/[email protected] [reword commit message, fix coding style, add a comment] Signed-off-by: Johannes Berg <[email protected]>
2020-01-15fix autofs regression caused by follow_managed() changesAl Viro1-0/+1
we need to reload ->d_flags after the call of ->d_manage() - the thing might've been called with dentry still negative and have the damn thing turned positive while we'd waited. Fixes: d41efb522e90 "fs/namei.c: pull positivity check into follow_managed()" Reported-by: Ian Kent <[email protected]> Tested-by: Ian Kent <[email protected]> Signed-off-by: Al Viro <[email protected]>
2020-01-15reimplement path_mountpoint() with less magicAl Viro3-80/+12
... and get rid of a bunch of bugs in it. Background: the reason for path_mountpoint() is that umount() really doesn't want attempts to revalidate the root of what it's trying to umount. The thing we want to avoid actually happen from complete_walk(); solution was to do something parallel to normal path_lookupat() and it both went overboard and got the boilerplate subtly (and not so subtly) wrong. A better solution is to do pretty much what the normal path_lookupat() does, but instead of complete_walk() do unlazy_walk(). All it takes to avoid that ->d_weak_revalidate() call... mountpoint_last() goes away, along with everything it got wrong, and so does the magic around LOOKUP_NO_REVAL. Another source of bugs is that when we traverse mounts at the final location (and we need to do that - umount . expects to get whatever's overmounting ., if any, out of the lookup) we really ought to take care of ->d_manage() - as it is, manual umount of autofs automount in progress can lead to unpleasant surprises for the daemon. Easily solved by using handle_lookup_down() instead of follow_mount(). Tested-by: Ian Kent <[email protected]> Signed-off-by: Al Viro <[email protected]>
2020-01-14io_uring: be consistent in assigning next work from handlerJens Axboe1-24/+28
If we pass back dependent work in case of links, we need to always ensure that we call the link setup and work prep handler. If not, we might be missing some setup for the next work item. Signed-off-by: Jens Axboe <[email protected]>
2020-01-14io-wq: cancel work if we fail getting a mm referenceJens Axboe1-4/+8
If we require mm and user context, mark the request for cancellation if we fail to acquire the desired mm. Signed-off-by: Jens Axboe <[email protected]>
2020-01-15MAINTAINERS: Update Ley Foon Tan's email addressLey Foon Tan1-4/+4
@altera.com email is going to removed. Change to @intel.com email. Signed-off-by: Ley Foon Tan <[email protected]>
2020-01-14net: mvneta: fix dma sync size in mvneta_run_xdpLorenzo Bianconi1-9/+10
Page pool API will start syncing (if requested) starting from page->dma_addr + pool->p.offset. Fix dma sync length in mvneta_run_xdp since we do not need to account xdp headroom Fixes: 07e13edbb6a6 ("net: mvneta: get rid of huge dma sync in mvneta_rx_refill") Signed-off-by: Lorenzo Bianconi <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-14r8152: add missing endpoint sanity checkJohan Hovold1-0/+3
Add missing endpoint sanity check to probe in order to prevent a NULL-pointer dereference (or slab out-of-bounds access) when retrieving the interrupt-endpoint bInterval on ndo_open() in case a device lacks the expected endpoints. Fixes: 40a82917b1d3 ("net/usb/r8152: enable interrupt transfer") Cc: hayeswang <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-14Merge tag 'nfs-for-5.5-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds2-7/+24
Pull NFS client bugfixes from Anna Schumaker: "Three NFS over RDMA fixes for bugs Chuck found that can be hit during device removal: - Fix create_qp crash on device unload - Fix completion wait during device removal - Fix oops in receive handler after device removal" * tag 'nfs-for-5.5-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: xprtrdma: Fix oops in Receive handler after device removal xprtrdma: Fix completion wait during device removal xprtrdma: Fix create_qp crash on device unload
2020-01-14block: fix get_max_segment_size() overflow on 32bit archMing Lei1-2/+7
Commit 429120f3df2d starts to take account of segment's start dma address when computing max segment size, and data type of 'unsigned long' is used to do that. However, the segment mask may be 0xffffffff, so the figured out segment size may be overflowed in case of zero physical address on 32bit arch. Fix the issue by returning queue_max_segment_size() directly when that happens. Fixes: 429120f3df2d ("block: fix splitting segments on boundary masks") Reported-by: Guenter Roeck <[email protected]> Tested-by: Guenter Roeck <[email protected]> Cc: Christoph Hellwig <[email protected]> Tested-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-01-14hv_sock: Remove the accept port restrictionSunil Muthuswamy1-59/+6
Currently, hv_sock restricts the port the guest socket can accept connections on. hv_sock divides the socket port namespace into two parts for server side (listening socket), 0-0x7FFFFFFF & 0x80000000-0xFFFFFFFF (there are no restrictions on client port namespace). The first part (0-0x7FFFFFFF) is reserved for sockets where connections can be accepted. The second part (0x80000000-0xFFFFFFFF) is reserved for allocating ports for the peer (host) socket, once a connection is accepted. This reservation of the port namespace is specific to hv_sock and not known by the generic vsock library (ex: af_vsock). This is problematic because auto-binds/ephemeral ports are handled by the generic vsock library and it has no knowledge of this port reservation and could allocate a port that is not compatible with hv_sock (and legitimately so). The issue hasn't surfaced so far because the auto-bind code of vsock (__vsock_bind_stream) prior to the change 'VSOCK: bind to random port for VMADDR_PORT_ANY' would start walking up from LAST_RESERVED_PORT (1023) and start assigning ports. That will take a large number of iterations to hit 0x7FFFFFFF. But, after the above change to randomize port selection, the issue has started coming up more frequently. There has really been no good reason to have this port reservation logic in hv_sock from the get go. Reserving a local port for peer ports is not how things are handled generally. Peer ports should reflect the peer port. This fixes the issue by lifting the port reservation, and also returns the right peer port. Since the code converts the GUID to the peer port (by using the first 4 bytes), there is a possibility of conflicts, but that seems like a reasonable risk to take, given this is limited to vsock and that only applies to all local sockets. Signed-off-by: Sunil Muthuswamy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-14net: usb: lan78xx: limit size of local TSO packetsEric Dumazet1-0/+1
lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE bytes in the aggregated packets it builds, but does nothing to prevent large GSO packets being submitted. Pierre-Francois reported various hangs when/if TSO is enabled. For localy generated packets, we can use netif_set_gso_max_size() to limit the size of TSO packets. Note that forwarded packets could still hit the issue, so a complete fix might require implementing .ndo_features_check for this driver, forcing a software segmentation if the size of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: RENARD Pierre-Francois <[email protected]> Tested-by: RENARD Pierre-Francois <[email protected]> Cc: Stefan Wahren <[email protected]> Cc: Woojung Huh <[email protected]> Cc: Microchip Linux Driver Support <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.