aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-08-10KVM: selftests: Make rseq compatible with glibc-2.35Gavin Shan2-22/+9
The rseq information is registered by TLS, starting from glibc-2.35. In this case, the test always fails due to syscall(__NR_rseq). For example, on RHEL9.1 where upstream glibc-2.35 features are enabled on downstream glibc-2.34, the test fails like below. # ./rseq_test ==== Test Assertion Failure ==== rseq_test.c:60: !r pid=112043 tid=112043 errno=22 - Invalid argument 1 0x0000000000401973: main at rseq_test.c:226 2 0x0000ffff84b6c79b: ?? ??:0 3 0x0000ffff84b6c86b: ?? ??:0 4 0x0000000000401b6f: _start at ??:? rseq failed, errno = 22 (Invalid argument) # rpm -aq | grep glibc-2 glibc-2.34-39.el9.aarch64 Fix the issue by using "../rseq/rseq.c" to fetch the rseq information, registred by TLS if it exists. Otherwise, we're going to register our own rseq information as before. Reported-by: Yihuang Yu <[email protected]> Suggested-by: Florian Weimer <[email protected]> Suggested-by: Mathieu Desnoyers <[email protected]> Suggested-by: Paolo Bonzini <[email protected]> Signed-off-by: Gavin Shan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: Actually create debugfs in kvm_create_vm()Oliver Upton1-17/+19
Doing debugfs creation after vm creation leaves things in a quasi-initialized state for a while. This is further complicated by the fact that we tear down debugfs from kvm_destroy_vm(). Align debugfs and stats init/destroy with the vm init/destroy pattern to avoid any headaches. Note the fix for a benign mistake in error handling for calls to kvm_arch_create_vm_debugfs() rolled in. Since all implementations of the function return 0 unconditionally it isn't actually a bug at the moment. Lastly, tear down debugfs/stats data in the kvm_create_vm_debugfs() error path. Previously it was safe to assume that kvm_destroy_vm() would take out the garbage, that is no longer the case. Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: Pass the name of the VM fd to kvm_create_vm_debugfs()Oliver Upton1-3/+6
At the time the VM fd is used in kvm_create_vm_debugfs(), the fd has been allocated but not yet installed. It is only really useful as an identifier in strings for the VM (such as debugfs). Treat it exactly as such by passing the string name of the fd to kvm_create_vm_debugfs(), futureproofing against possible misuse of the VM fd. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: Get an fd before creating the VMOliver Upton1-13/+17
Allocate a VM's fd at the very beginning of kvm_dev_ioctl_create_vm() so that KVM can use the fd value to generate strigns, e.g. for debugfs, when creating and initializing the VM. Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: Shove vcpu stats_id init into kvm_vcpu_init()Oliver Upton1-4/+4
Initialize stats_id alongside other kvm_vcpu fields to make it more difficult to unintentionally access stats_id before it's set. No functional change intended. Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: Shove vm stats_id init into kvm_create_vm()Oliver Upton1-3/+3
Initialize stats_id alongside other struct kvm fields to make it more difficult to unintentionally access stats_id before it's set. While at it, move the format string to the first line of the call and fix the indentation of the second line. No functional change intended. Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86/mmu: Add sanity check that MMIO SPTE mask doesn't overlap genSean Christopherson2-0/+22
Add compile-time and init-time sanity checks to ensure that the MMIO SPTE mask doesn't overlap the MMIO SPTE generation or the MMU-present bit. The generation currently avoids using bit 63, but that's as much coincidence as it is strictly necessarly. That will change in the future, as TDX support will require setting bit 63 (SUPPRESS_VE) in the mask. Explicitly carve out the bits that are allowed in the mask so that any future shuffling of SPTE bits doesn't silently break MMIO caching (KVM has broken MMIO caching more than once due to overlapping the generation with other things). Suggested-by: Kai Huang <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Kai Huang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86/mmu: rename trace function name for asynchronous page faultMingwei Zhang2-2/+2
Rename the tracepoint function from trace_kvm_async_pf_doublefault() to trace_kvm_async_pf_repeated_fault() to make it clear, since double fault has nothing to do with this trace function. Asynchronous Page Fault (APF) is an artifact generated by KVM when it cannot find a physical page to satisfy an EPT violation. KVM uses APF to tell the guest OS to do something else such as scheduling other guest processes to make forward progress. However, when another guest process also touches a previously APFed page, KVM halts the vCPU instead of generating a repeated APF to avoid wasting cycles. Double fault (#DF) clearly has a different meaning and a different consequence when triggered. #DF requires two nested contributory exceptions instead of two page faults faulting at the same address. A prevous bug on APF indicates that it may trigger a double fault in the guest [1] and clearly this trace function has nothing to do with it. So rename this function should be a valid choice. No functional change intended. [1] https://www.spinics.net/lists/kvm/msg214957.html Signed-off-by: Mingwei Zhang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86/xen: Stop Xen timer before changing IRQColeman Dietsch1-18/+17
Stop Xen timer (if it's running) prior to changing the IRQ vector and potentially (re)starting the timer. Changing the IRQ vector while the timer is still running can result in KVM injecting a garbage event, e.g. vm_xen_inject_timer_irqs() could see a non-zero xen.timer_pending from a previous timer but inject the new xen.timer_virq. Fixes: 536395260582 ("KVM: x86/xen: handle PV timers oneshot mode") Cc: [email protected] Link: https://syzkaller.appspot.com/bug?id=8234a9dfd3aafbf092cc5a7cd9842e3ebc45fc42 Reported-by: [email protected] Signed-off-by: Coleman Dietsch <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Acked-by: David Woodhouse <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86/xen: Initialize Xen timer only onceColeman Dietsch1-1/+3
Add a check for existing xen timers before initializing a new one. Currently kvm_xen_init_timer() is called on every KVM_XEN_VCPU_ATTR_TYPE_TIMER, which is causing the following ODEBUG crash when vcpu->arch.xen.timer is already set. ODEBUG: init active (active state 0) object type: hrtimer hint: xen_timer_callbac0 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:502 Call Trace: __debug_object_init debug_hrtimer_init debug_init hrtimer_init kvm_xen_init_timer kvm_xen_vcpu_set_attr kvm_arch_vcpu_ioctl kvm_vcpu_ioctl vfs_ioctl Fixes: 536395260582 ("KVM: x86/xen: handle PV timers oneshot mode") Cc: [email protected] Link: https://syzkaller.appspot.com/bug?id=8234a9dfd3aafbf092cc5a7cd9842e3ebc45fc42 Reported-by: [email protected] Signed-off-by: Coleman Dietsch <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: SVM: Disable SEV-ES support if MMIO caching is disableSean Christopherson5-5/+19
Disable SEV-ES if MMIO caching is disabled as SEV-ES relies on MMIO SPTEs generating #NPF(RSVD), which are reflected by the CPU into the guest as a #VC. With SEV-ES, the untrusted host, a.k.a. KVM, doesn't have access to the guest instruction stream or register state and so can't directly emulate in response to a #NPF on an emulated MMIO GPA. Disabling MMIO caching means guest accesses to emulated MMIO ranges cause #NPF(!PRESENT), and those flavors of #NPF cause automatic VM-Exits, not #VC. Adjust KVM's MMIO masks to account for the C-bit location prior to doing SEV(-ES) setup, and document that dependency between adjusting the MMIO SPTE mask and SEV(-ES) setup. Fixes: b09763da4dd8 ("KVM: x86/mmu: Add module param to disable MMIO caching (for testing)") Reported-by: Michael Roth <[email protected]> Tested-by: Michael Roth <[email protected]> Cc: Tom Lendacky <[email protected]> Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks changeSean Christopherson3-0/+24
Fully re-evaluate whether or not MMIO caching can be enabled when SPTE masks change; simply clearing enable_mmio_caching when a configuration isn't compatible with caching fails to handle the scenario where the masks are updated, e.g. by VMX for EPT or by SVM to account for the C-bit location, and toggle compatibility from false=>true. Snapshot the original module param so that re-evaluating MMIO caching preserves userspace's desire to allow caching. Use a snapshot approach so that enable_mmio_caching still reflects KVM's actual behavior. Fixes: 8b9e74bfbf8c ("KVM: x86/mmu: Use enable_mmio_caching to track if MMIO caching is enabled") Reported-by: Michael Roth <[email protected]> Cc: Tom Lendacky <[email protected]> Cc: [email protected] Tested-by: Michael Roth <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Kai Huang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86: Tag kvm_mmu_x86_module_init() with __initSean Christopherson2-2/+2
Mark kvm_mmu_x86_module_init() with __init, the entire reason it exists is to initialize variables when kvm.ko is loaded, i.e. it must never be called after module initialization. Fixes: 1d0e84806047 ("KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loaded") Cc: [email protected] Reviewed-by: Kai Huang <[email protected]> Tested-by: Michael Roth <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86: emulator: Fix illegal LEA handlingMichal Luczaj1-1/+5
The emulator mishandles LEA with register source operand. Even though such LEA is illegal, it can be encoded and fed to CPU. In which case real hardware throws #UD. The emulator, instead, returns address of x86_emulate_ctxt._regs. This info leak hurts host's kASLR. Tell the decoder that illegal LEA is not to be emulated. Signed-off-by: Michal Luczaj <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: X86: avoid uninitialized 'fault.async_page_fault' from fixed-up #PFYu Zhang1-0/+1
kvm_fixup_and_inject_pf_error() was introduced to fixup the error code( e.g., to add RSVD flag) and inject the #PF to the guest, when guest MAXPHYADDR is smaller than the host one. When it comes to nested, L0 is expected to intercept and fix up the #PF and then inject to L2 directly if - L2.MAXPHYADDR < L0.MAXPHYADDR and - L1 has no intention to intercept L2's #PF (e.g., L2 and L1 have the same MAXPHYADDR value && L1 is using EPT for L2), instead of constructing a #PF VM Exit to L1. Currently, with PFEC_MASK and PFEC_MATCH both set to 0 in vmcs02, the interception and injection may happen on all L2 #PFs. However, failing to initialize 'fault' in kvm_fixup_and_inject_pf_error() may cause the fault.async_page_fault being NOT zeroed, and later the #PF being treated as a nested async page fault, and then being injected to L1. Instead of zeroing 'fault' at the beginning of this function, we mannually set the value of 'fault.async_page_fault', because false is the value we really expect. Fixes: 897861479c064 ("KVM: x86: Add helper functions for illegal GPA checking and page fault injection") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216178 Reported-by: Yang Lixiao <[email protected]> Signed-off-by: Yu Zhang <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86: Bug the VM if an accelerated x2APIC trap occurs on a "bad" regSean Christopherson1-3/+5
Bug the VM if retrieving the x2APIC MSR/register while processing an accelerated vAPIC trap VM-Exit fails. In theory it's impossible for the lookup to fail as hardware has already validated the register, but bugs happen, and not checking the result of kvm_lapic_msr_read() would result in consuming the uninitialized "val" if a KVM or hardware bug occurs. Fixes: 1bd9dfec9fd4 ("KVM: x86: Do not block APIC write for non ICR registers") Reported-by: Dan Carpenter <[email protected]> Cc: Suravee Suthikulpanit <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86: do not report preemption if the steal time cache is stalePaolo Bonzini1-0/+2
Commit 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status", 2021-11-11) open coded the previous call to kvm_map_gfn, but in doing so it dropped the comparison between the cached guest physical address and the one in the MSR. This cause an incorrect cache hit if the guest modifies the steal time address while the memslots remain the same. This can happen with kexec, in which case the preempted bit is written at the address used by the old kernel instead of the old one. Cc: David Woodhouse <[email protected]> Cc: [email protected] Fixes: 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status") Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10KVM: x86: revalidate steal time cache if MSR value changesPaolo Bonzini1-3/+3
Commit 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status", 2021-11-11) open coded the previous call to kvm_map_gfn, but in doing so it dropped the comparison between the cached guest physical address and the one in the MSR. This cause an incorrect cache hit if the guest modifies the steal time address while the memslots remain the same. This can happen with kexec, in which case the steal time data is written at the address used by the old kernel instead of the old one. While at it, rename the variable from gfn to gpa since it is a plain physical address and not a right-shifted one. Reported-by: Dave Young <[email protected]> Reported-by: Xiaoying Yan <[email protected]> Analyzed-by: Dr. David Alan Gilbert <[email protected]> Cc: David Woodhouse <[email protected]> Cc: [email protected] Fixes: 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status") Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10selftests: kvm: fix compilationPaolo Bonzini1-0/+2
Commit 49de12ba06ef ("selftests: drop KSFT_KHDR_INSTALL make target") dropped from tools/testing/selftests/lib.mk the code related to KSFT_KHDR_INSTALL, but in doing so it also dropped the definition of the ARCH variable. The ARCH variable is used in several subdirectories, but kvm/ is the only one of these that was using KSFT_KHDR_INSTALL. As a result, kvm selftests cannot be built anymore: In file included from include/x86_64/vmx.h:12, from x86_64/vmx_pmu_caps_test.c:18: include/x86_64/processor.h:15:10: fatal error: asm/msr-index.h: No such file or directory 15 | #include <asm/msr-index.h> | ^~~~~~~~~~~~~~~~~ In file included from ../../../../tools/include/asm/atomic.h:6, from ../../../../tools/include/linux/atomic.h:5, from rseq_test.c:15: ../../../../tools/include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/cmpxchg.h: No such file or directory 11 | #include <asm/cmpxchg.h> | ^~~~~~~~~~~~~~~ Fix it by including the definition that was present in lib.mk. Fixes: 49de12ba06ef ("selftests: drop KSFT_KHDR_INSTALL make target") Cc: Guillaume Tucker <[email protected]> Cc: Anders Roxell <[email protected]> Cc: Shuah Khan <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-08-10Merge tag 'hwmon-fixes-for-v6.0-rc1' of ↵Linus Torvalds4-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix two regressions in nct6775 and lm90 drivers" * tag 'hwmon-fixes-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6775) Fix platform driver suspend regression hwmon: (lm90) Fix error return value from detect function
2022-08-10Merge tag 'rpmsg-v5.20-1' of ↵Linus Torvalds2-7/+28
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull rpmsg fixes from Bjorn Andersson: "This fixes schema validation warnings in the Devicetree bindings for SMD and SMD RPM" * tag 'rpmsg-v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: dt-bindings: soc: qcom: smd-rpm: extend example dt-bindings: soc: qcom: smd: reference SMD edge schema
2022-08-10Merge tag 'mm-stable-2022-08-09' of ↵Linus Torvalds21-702/+823
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull remaining MM updates from Andrew Morton: "Three patch series - two that perform cleanups and one feature: - hugetlb_vmemmap cleanups from Muchun Song - hardware poisoning support for 1GB hugepages, from Naoya Horiguchi - highmem documentation fixups from Fabio De Francesco" * tag 'mm-stable-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits) Documentation/mm: add details about kmap_local_page() and preemption highmem: delete a sentence from kmap_local_page() kdocs Documentation/mm: rrefer kmap_local_page() and avoid kmap() Documentation/mm: avoid invalid use of addresses from kmap_local_page() Documentation/mm: don't kmap*() pages which can't come from HIGHMEM highmem: specify that kmap_local_page() is callable from interrupts highmem: remove unneeded spaces in kmap_local_page() kdocs mm, hwpoison: enable memory error handling on 1GB hugepage mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage mm, hwpoison: make __page_handle_poison returns int mm, hwpoison: set PG_hwpoison for busy hugetlb pages mm, hwpoison: make unpoison aware of raw error info in hwpoisoned hugepage mm, hwpoison, hugetlb: support saving mechanism of raw error pages mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry mm/hugetlb: check gigantic_page_runtime_supported() in return_unused_surplus_pages() mm: hugetlb_vmemmap: use PTRS_PER_PTE instead of PMD_SIZE / PAGE_SIZE mm: hugetlb_vmemmap: move code comments to vmemmap_dedup.rst mm: hugetlb_vmemmap: improve hugetlb_vmemmap code readability mm: hugetlb_vmemmap: replace early_param() with core_param() mm: hugetlb_vmemmap: move vmemmap code related to HugeTLB to hugetlb_vmemmap.c ...
2022-08-10Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds39-576/+5498
Pull cxl updates from Dan Williams: "Compute Express Link (CXL) updates for 6.0: - Introduce a 'struct cxl_region' object with support for provisioning and assembling persistent memory regions. - Introduce alloc_free_mem_region() to accompany the existing request_free_mem_region() as a method to allocate physical memory capacity out of an existing resource. - Export insert_resource_expand_to_fit() for the CXL subsystem to late-publish CXL platform windows in iomem_resource. - Add a polled mode PCI DOE (Data Object Exchange) driver service and use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute Table)" * tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits) cxl/hdm: Fix skip allocations vs multiple pmem allocations cxl/region: Disallow region granularity != window granularity cxl/region: Fix x1 interleave to greater than x1 interleave routing cxl/region: Move HPA setup to cxl_region_attach() cxl/region: Fix decoder interleave programming Documentation: cxl: remove dangling kernel-doc reference cxl/region: describe targets and nr_targets members of cxl_region_params cxl/regions: add padding for cxl_rr_ep_add nested lists cxl/region: Fix IS_ERR() vs NULL check cxl/region: Fix region reference target accounting cxl/region: Fix region commit uninitialized variable warning cxl/region: Fix port setup uninitialized variable warnings cxl/region: Stop initializing interleave granularity cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime cxl/acpi: Minimize granularity for x1 interleaves cxl/region: Delete 'region' attribute from root decoders cxl/acpi: Autoload driver for 'cxl_acpi' test devices cxl/region: decrement ->nr_targets on error in cxl_region_attach() cxl/region: prevent underflow in ways_to_cxl() cxl/region: uninitialized variable in alloc_hpa() ...
2022-08-10Merge tag 'pinctrl-v6.0-1' of ↵Linus Torvalds88-667/+13354
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Outside the pinctrl driver and DT bindings we hit some Arm DT files, patched by the maintainers. Other than that it is business as usual. Core changes: - Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver). New drivers: - Intel Meteor Lake support. - Reneasas RZ/V2M and r8a779g0 (R-Car V4H). - AXP209 variants AXP221, AXP223 and AXP809. - Qualcomm MSM8909, PM8226, PMP8074 and SM6375. - Allwinner D1. Improvements: - Proper pin multiplexing in the AMD driver. - Mediatek MT8192 can use generic drive strength and pin bias, then fixes on top plus some I2C pin group fixes. - Have the Allwinner Sunplus SP7021 use the generic DT schema and make interrupts optional. - Handle Qualcomm SC7280 ADSP. - Handle Qualcomm MSM8916 CAMSS GP clock muxing. - High impedance bias on ZynqMP. - Serialize StarFive access to MMIO. - Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO" * tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits) dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM pinctrl: qcom: sm8250: Fix PDC map pinctrl: amd: Fix an unused variable dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp dt-bindings: pinctrl: mt8186: Add gpio-line-names property ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header pinctrl: amd: Use unicode for debugfs output pinctrl: amd: Fix newline declaration in debugfs output pinctrl: at91: Fix typo 'the the' in comment dt-bindings: pinctrl: st,stm32: Correct 'resets' property name pinctrl: mvebu: Missing a blank line after declarations. pinctrl: qcom: Add SM6375 TLMM driver dt-bindings: pinctrl: Add DT schema for SM6375 TLMM dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable" pinctrl: imx93: Add MODULE_DEVICE_TABLE() pinctrl: sunxi: Add driver for Allwinner D1 pinctrl: sunxi: Make some layout parameters dynamic pinctrl: sunxi: Refactor register/offset calculation ...
2022-08-10Merge tag 'apparmor-pr-2022-08-08' of ↵Linus Torvalds30-340/+492
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull AppArmor updates from John Johansen: "This is mostly cleanups and bug fixes with the one bigger change being Mathew Wilcox's patch to use XArrays instead of the IDR from the thread around the locking weirdness. Features: - Convert secid mapping to XArrays instead of IDR - Add a kernel label to use on kernel objects - Extend policydb permission set by making use of the xbits - Make export of raw binary profile to userspace optional - Enable tuning of policy paranoid load for embedded systems - Don't create raw_sha1 symlink if sha1 hashing is disabled - Allow labels to carry debug flags Cleanups: - Update MAINTAINERS file - Use struct_size() helper in kmalloc() - Move ptrace mediation to more logical task.{h,c} - Resolve uninitialized symbol warnings - Remove redundant ret variable - Mark alloc_unconfined() as static - Update help description of policy hash for introspection - Remove some casts which are no-longer required Bug Fixes: - Fix aa_label_asxprint return check - Fix reference count leak in aa_pivotroot() - Fix memleak in aa_simple_write_to_buffer() - Fix kernel doc comments - Fix absroot causing audited secids to begin with = - Fix quiet_denied for file rules - Fix failed mount permission check error message - Disable showing the mode as part of a secid to secctx - Fix setting unconfined mode on a loaded profile - Fix overlapping attachment computation - Fix undefined reference to `zlib_deflate_workspacesize'" * tag 'apparmor-pr-2022-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (34 commits) apparmor: Update MAINTAINERS file with new email address apparmor: correct config reference to intended one apparmor: move ptrace mediation to more logical task.{h,c} apparmor: extend policydb permission set by making use of the xbits apparmor: allow label to carry debug flags apparmor: fix overlapping attachment computation apparmor: fix setting unconfined mode on a loaded profile apparmor: Fix some kernel-doc comments apparmor: Mark alloc_unconfined() as static apparmor: disable showing the mode as part of a secid to secctx apparmor: Convert secid mapping to XArrays instead of IDR apparmor: add a kernel label to use on kernel objects apparmor: test: Remove some casts which are no-longer required apparmor: Fix memleak in aa_simple_write_to_buffer() apparmor: fix reference count leak in aa_pivotroot() apparmor: Fix some kernel-doc comments apparmor: Fix undefined reference to `zlib_deflate_workspacesize' apparmor: fix aa_label_asxprint return check apparmor: Fix some kernel-doc comments apparmor: Fix some kernel-doc comments ...
2022-08-10Merge tag 'kbuild-v5.20' of ↵Linus Torvalds36-313/+111
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3) - Fix error of rpm-pkg cross-builds - Support riscv for checkstack tool - Re-enable -Wformwat warnings for Clang - Clean up modpost, Makefiles, and misc scripts * tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) modpost: remove .symbol_white_list field entirely modpost: remove unneeded .symbol_white_list initializers modpost: add PATTERNS() helper macro modpost: shorten warning messages in report_sec_mismatch() Revert "Kbuild, lto, workaround: Don't warn for initcall_reference in modpost" modpost: use more reliable way to get fromsec in section_rel(a)() modpost: add array range check to sec_name() modpost: refactor get_secindex() kbuild: set EXIT trap before creating temporary directory modpost: remove unused Elf_Sword macro Makefile.extrawarn: re-enable -Wformat for clang kbuild: add dtbs_prepare target kconfig: Qt5: tell the user which packages are required modpost: use sym_get_data() to get module device_table data modpost: drop executable ELF support checkstack: add riscv support for scripts/checkstack.pl kconfig: shorten the temporary directory name for cc-option scripts: headers_install.sh: Update config leak ignore entries kbuild: error out if $(INSTALL_MOD_PATH) contains % or : kbuild: error out if $(KBUILD_EXTMOD) contains % or : ...
2022-08-10perf tools: Do not pass NULL to parse_events()Adrian Hunter22-35/+45
Many cases do not use the extra error information provided by parse_events and instead pass NULL as the struct parse_events_error pointer. Add a wrapper for those cases so that the pointer is never NULL. Signed-off-by: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-10perf tests: Fix Track with sched_switch test for hybrid caseAdrian Hunter1-5/+13
If cpu_core PMU event fails to parse, try also cpu_atom PMU event when parsing cycles event. Fixes: 43eb05d066795bdf ("perf tests: Support 'Track with sched_switch' test for hybrid") Signed-off-by: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-10perf parse-events: Fix segfault when event parser gets an errorAdrian Hunter1-3/+11
parse_events() is often called with parse_events_error set to NULL. Make parse_events_error__handle() not segfault in that case. A subsequent patch changes to avoid passing NULL in the first place. Fixes: 43eb05d066795bdf ("perf tests: Support 'Track with sched_switch' test for hybrid") Signed-off-by: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-10Merge branch 'fixes for bpf map iterator'Alexei Starovoitov8-7/+191
Hou Tao says: ==================== From: Hou Tao <[email protected]> Hi, The patchset constitues three fixes for bpf map iterator: (1) patch 1~4: fix user-after-free during reading map iterator fd It is possible when both the corresponding link fd and map fd are closed bfore reading the iterator fd. I had squashed these four patches into one, but it was not friendly for stable backport, so I break these fixes into four single patches in the end. Patch 7 is its testing patch. (2) patch 5: fix invalidity check for values in sk local storage map Patch 8 adds two tests for it. (3) patch 6: reject sleepable program for non-resched map iterator Patch 9 add a test for it. Please check the individual patches for more details. And comments are always welcome. Regards, Tao Changes since v2: * patch 1~6: update commit messages (from Yonghong & Martin) * patch 7: add more detailed comments (from Yonghong) * patch 8: use NULL directly instead of (void *)0 v1: https://lore.kernel.org/bpf/[email protected] ==================== Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10selftests/bpf: Ensure sleepable program is rejected by hash map iterHou Tao2-0/+15
Add a test to ensure sleepable program is rejected by hash map iterator. Signed-off-by: Hou Tao <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10selftests/bpf: Add write tests for sk local storage map iteratorHou Tao2-4/+38
Add test to validate the overwrite of sock local storage map value in map iterator and another one to ensure out-of-bound value writing is rejected. Signed-off-by: Hou Tao <[email protected]> Acked-by: Yonghong Song <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10selftests/bpf: Add tests for reading a dangling map iter fdHou Tao1-0/+92
After closing both related link fd and map fd, reading the map iterator fd to ensure it is OK to do so. Signed-off-by: Hou Tao <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10bpf: Only allow sleepable program for resched-able iteratorHou Tao1-1/+10
When a sleepable program is attached to a hash map iterator, might_fault() will report "BUG: sleeping function called from invalid context..." if CONFIG_DEBUG_ATOMIC_SLEEP is enabled. The reason is that rcu_read_lock() is held in bpf_hash_map_seq_next() and won't be released until all elements are traversed or bpf_hash_map_seq_stop() is called. Fixing it by reusing BPF_ITER_RESCHED to indicate that only non-sleepable program is allowed for iterator without BPF_ITER_RESCHED. We can revise bpf_iter_link_attach() later if there are other conditions which may cause rcu_read_lock() or spin_lock() issues. Signed-off-by: Hou Tao <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10bpf: Check the validity of max_rdwr_access for sock local storage map iteratorHou Tao1-1/+1
The value of sock local storage map is writable in map iterator, so check max_rdwr_access instead of max_rdonly_access. Fixes: 5ce6e77c7edf ("bpf: Implement bpf iterator for sock local storage map") Signed-off-by: Hou Tao <[email protected]> Acked-by: Yonghong Song <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10bpf: Acquire map uref in .init_seq_private for sock{map,hash} iteratorHou Tao1-1/+19
sock_map_iter_attach_target() acquires a map uref, and the uref may be released before or in the middle of iterating map elements. For example, the uref could be released in sock_map_iter_detach_target() as part of bpf_link_release(), or could be released in bpf_map_put_with_uref() as part of bpf_map_release(). Fixing it by acquiring an extra map uref in .init_seq_private and releasing it in .fini_seq_private. Fixes: 0365351524d7 ("net: Allow iterating sockmap and sockhash") Signed-off-by: Hou Tao <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10bpf: Acquire map uref in .init_seq_private for sock local storage map iteratorHou Tao1-1/+9
bpf_iter_attach_map() acquires a map uref, and the uref may be released before or in the middle of iterating map elements. For example, the uref could be released in bpf_iter_detach_map() as part of bpf_link_release(), or could be released in bpf_map_put_with_uref() as part of bpf_map_release(). So acquiring an extra map uref in bpf_iter_init_sk_storage_map() and releasing it in bpf_iter_fini_sk_storage_map(). Fixes: 5ce6e77c7edf ("bpf: Implement bpf iterator for sock local storage map") Signed-off-by: Hou Tao <[email protected]> Acked-by: Yonghong Song <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10bpf: Acquire map uref in .init_seq_private for hash map iteratorHou Tao1-0/+2
bpf_iter_attach_map() acquires a map uref, and the uref may be released before or in the middle of iterating map elements. For example, the uref could be released in bpf_iter_detach_map() as part of bpf_link_release(), or could be released in bpf_map_put_with_uref() as part of bpf_map_release(). So acquiring an extra map uref in bpf_iter_init_hash_map() and releasing it in bpf_iter_fini_hash_map(). Fixes: d6c4503cc296 ("bpf: Implement bpf iterator for hash maps") Signed-off-by: Hou Tao <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10bpf: Acquire map uref in .init_seq_private for array map iteratorHou Tao1-0/+6
bpf_iter_attach_map() acquires a map uref, and the uref may be released before or in the middle of iterating map elements. For example, the uref could be released in bpf_iter_detach_map() as part of bpf_link_release(), or could be released in bpf_map_put_with_uref() as part of bpf_map_release(). Alternative fix is acquiring an extra bpf_link reference just like a pinned map iterator does, but it introduces unnecessary dependency on bpf_link instead of bpf_map. So choose another fix: acquiring an extra map uref in .init_seq_private for array map iterator. Fixes: d3cc2ab546ad ("bpf: Implement bpf iterator for array maps") Signed-off-by: Hou Tao <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10bpf: Disallow bpf programs call prog_run command.Alexei Starovoitov2-8/+16
The verifier cannot perform sufficient validation of bpf_attr->test.ctx_in pointer, therefore bpf programs should not be allowed to call BPF_PROG_RUN command from within the program. To fix this issue split bpf_sys_bpf() bpf helper into normal kern_sys_bpf() kernel function that can only be used by the kernel light skeleton directly. Reported-by: YiFei Zhu <[email protected]> Fixes: b1d18a7574d0 ("bpf: Extend sys_bpf commands for bpf_syscall programs.") Signed-off-by: Alexei Starovoitov <[email protected]>
2022-08-10dt-bindings: Drop DT_MK_SCHEMA_FLAGS conditional selecting schema filesRob Herring1-3/+1
Since commit ef8795f3f1ce ("dt-bindings: kbuild: Use DTB files for validation"), dt-mk-schema always needs a complete list of schemas, so the conditional using DT_MK_SCHEMA_FLAGS should be removed. Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-10bpf, arm64: Fix bpf trampoline instruction endiannessXu Kuohai1-6/+6
The sparse tool complains as follows: arch/arm64/net/bpf_jit_comp.c:1684:16: warning: incorrect type in assignment (different base types) arch/arm64/net/bpf_jit_comp.c:1684:16: expected unsigned int [usertype] *branch arch/arm64/net/bpf_jit_comp.c:1684:16: got restricted __le32 [usertype] * arch/arm64/net/bpf_jit_comp.c:1700:52: error: subtraction of different types can't work (different base types) arch/arm64/net/bpf_jit_comp.c:1734:29: warning: incorrect type in assignment (different base types) arch/arm64/net/bpf_jit_comp.c:1734:29: expected unsigned int [usertype] * arch/arm64/net/bpf_jit_comp.c:1734:29: got restricted __le32 [usertype] * arch/arm64/net/bpf_jit_comp.c:1918:52: error: subtraction of different types can't work (different base types) This is because the variable branch in function invoke_bpf_prog and the variable branches in function prepare_trampoline are defined as type u32 *, which conflicts with ctx->image's type __le32 *, so sparse complains when assignment or arithmetic operation are performed on these two variables and ctx->image. Since arm64 instructions are always little-endian, change the type of these two variables to __le32 * and call cpu_to_le32() to convert instruction to little-endian before writing it to memory. This is also in line with emit() which internally does cpu_to_le32(), too. Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64") Reported-by: kernel test robot <[email protected]> Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Jean-Philippe Brucker <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-08-10nvme-tcp: check if the queue is allocated before stopping itMaurizio Lombardi1-0/+3
When an error is detected and the host reconnects, the nvme_tcp_error_recovery_work() function is called and starts tearing down the io queues and de-allocating them; If at the same time the "nvme" process deletes the controller via sysfs, the nvme_tcp_delete_ctrl() gets called and waits until the nvme_tcp_error_recovery_work() finishes its job; then starts tearing down the io queues, but at this point they have already been freed and the mutexes are destroyed. Calling mutex_lock() against a destroyed mutex triggers a warning: [ 1299.025575] nvme nvme1: Reconnecting in 10 seconds... [ 1299.636449] nvme nvme1: Removing ctrl: NQN "blktests-subsystem-1" [ 1299.645262] ------------[ cut here ]------------ [ 1299.649949] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 1299.649971] WARNING: CPU: 4 PID: 104150 at kernel/locking/mutex.c:579 __mutex_lock+0x2d0/0x7dc [ 1299.717934] CPU: 4 PID: 104150 Comm: nvme [ 1299.828075] Call trace: [ 1299.830526] __mutex_lock+0x2d0/0x7dc [ 1299.834203] mutex_lock_nested+0x64/0xd4 [ 1299.838139] nvme_tcp_stop_queue+0x54/0xe0 [nvme_tcp] [ 1299.843211] nvme_tcp_teardown_io_queues.part.0+0x90/0x280 [nvme_tcp] [ 1299.849672] nvme_tcp_delete_ctrl+0x6c/0xf0 [nvme_tcp] [ 1299.854831] nvme_do_delete_ctrl+0x108/0x120 [nvme_core] [ 1299.860181] nvme_sysfs_delete+0xec/0xf0 [nvme_core] [ 1299.865179] dev_attr_store+0x40/0x70 Fix the warning by checking if the queues are allocated in the nvme_tcp_stop_queue(). If they are not, it makes no sense to try to stop them. Signed-off-by: Maurizio Lombardi <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-08-10nvme-fabrics: Fix a typo in an error messageChristophe JAILLET1-1/+1
A 'c' is missing. s/fabris/fabrics/ Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-08-10nvme-fabrics: parse nvme connect Linux error codesAmit Engel1-0/+6
This fixes the assumption that errval is an unsigned nvme error Signed-off-by: Amit Engel <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-08-10nvmet-auth: use kmemdup instead of kmalloc + memcpyZhang Xiaoxu1-2/+2
For code neat purpose, we can use kmemdup to replace kmalloc + memcpy. Signed-off-by: Zhang Xiaoxu <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-08-10nvme-fc: fix the fc_appid_store return valueChristoph Hellwig1-1/+2
"nvme-fc: fold t fc_update_appid into fc_appid_store" accidentally changed the userspace interface for the appid attribute, because the code that decrements "count" to remove a trailing '\n' in the parsing results in the decremented value being incorrectly be returned from the sysfs write. Fix this by keeping an orig_count variable for the full length of the write. Fixes: c814153c83a8 ("nvme-fc: fold t fc_update_appid into fc_appid_store") Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Ewan D. Milne <[email protected]> Reviewed-by: James Smart <[email protected]> Tested-by: Muneendra Kumar M <[email protected]>
2022-08-10nvme-fc: restart admin queue if the caller needs to restart queueMing Lei1-0/+2
Without restarting admin queue in __nvme_fc_abort_outstanding_ios(), it leaves controller not capable of handling admin pt request, and causes io hang. Fixes it by restarting admin queue if the caller of __nvme_fc_abort_outstanding_ios requires to restart queue. Signed-off-by: Ming Lei <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: James Smart <[email protected]> Tested-by: Ewan D. Milne <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-08-10perf machine: Fix missing free of machine->kallsyms_filenameAdrian Hunter1-0/+1
Add missing free of machine->kallsyms_filename to machine__exit(). Fixes: a5367ecb5353fbf2 ("perf tools: Automatically use guest kcore_dir if present") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-08-10perf script: Fix reference to perf insert instead of perf injectAdrian Hunter1-1/+1
Amend "perf insert" to "perf inject". Fixes: e28fb159f1163e76 ("perf script: Add machine_pid and vcpu") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.