aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-03-31docs: netdev: replace references to old archivesJakub Kicinski1-4/+2
Most people use (or should use) lore at this point. Replace the pointers to older archiving systems. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-03-31Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"Thomas Gleixner5-69/+1
Revert commit bf9ad37dc8a. It needs to be better encapsulated and generalized. Signed-off-by: Thomas Gleixner <[email protected]> Cc: "Eric W. Biederman" <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Sebastian Andrzej Siewior <[email protected]>
2022-03-31drm/vc4: Implement atomic_print_state for HVS channel stateMaxime Ripard1-0/+17
The HVS state configuration is useful when debugging what's going on in the vc4 hardware pipeline. Add an implementation of .atomic_print_state. Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-31drm/vc4: Constify private state accessorsMaxime Ripard1-3/+4
None of those helpers modify the pointed data, let's make them const. Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-31drm/atomic: Add atomic_print_state to private objectsMaxime Ripard2-4/+39
A number of drivers (amdgpu, komeda, vc4, etc.) leverage the drm_private_state structure, but we don't have any infrastructure to provide debugging like we do for the other components state. Let's add an atomic_print_state hook to be consistent. Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-31drm/atomic: Print the state every non-blocking commitMaxime Ripard2-4/+4
The DRM_UT_STATE controls whether we're calling drm_atomic_print_new_state() whenever a new state is committed. However, that call is made in the drm_mode_atomic_ioctl(), whereas we have multiple users of the drm_atomic_commit() function in the kernel (framebuffer emulation, drm_atomic_helper_dirtyfb, etc.). This leads to multiple states being committed but never actually displayed even though we asked to have verbose atomic state debugging. Let's move the call to drm_atomic_print_new_state() to drm_atomic_commit() to make sure we don't miss any. Non-blocking commits were never logged though, and it would create too much churn in the logs to do so, so leave them out for now. Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-31can: gs_usb: gs_make_candev(): fix memory leak for devices with extended bit ↵Marc Kleine-Budde1-0/+2
timing configuration Some CAN-FD capable devices offer extended bit timing information for the data bit timing. The information must be read with an USB control message. The memory for this message is allocated but not free()ed (in the non error case). This patch adds the missing free. Fixes: 6679f4c5e5a6 ("can: gs_usb: add extended bt_const feature") Link: https://lore.kernel.org/all/[email protected] Reported-by: [email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-03-31can: mcba_usb: properly check endpoint typePavel Skripkin1-10/+16
Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. We should check that in endpoint is actually present to prevent this warning. Found pipes are now saved to struct mcba_priv and code uses them directly instead of making pipes in place. Fail log: | usb 5-1: BOGUS urb xfer, pipe 3 != type 1 | WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | Modules linked in: | CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0 | Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 | Workqueue: usb_hub_wq hub_event | RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | ... | Call Trace: | <TASK> | mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline] | mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858 | usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 | call_driver_probe drivers/base/dd.c:517 [inline] Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/all/[email protected] Reported-and-tested-by: [email protected] Signed-off-by: Pavel Skripkin <[email protected]> Reviewed-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-03-31can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error pathHangyu Hua1-1/+0
There is no need to call dev_kfree_skb() when usb_submit_urb() fails because can_put_echo_skb() deletes original skb and can_free_echo_skb() deletes the cloned skb. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Hangyu Hua <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-03-31can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error pathHangyu Hua1-16/+14
There is no need to call dev_kfree_skb() when usb_submit_urb() fails because can_put_echo_skb() deletes original skb and can_free_echo_skb() deletes the cloned skb. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Hangyu Hua <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-03-31can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error pathHangyu Hua1-1/+0
There is no need to call dev_kfree_skb() when usb_submit_urb() fails beacause can_put_echo_skb() deletes the original skb and can_free_echo_skb() deletes the cloned skb. Link: https://lore.kernel.org/all/[email protected] Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Cc: [email protected] Cc: Sebastian Haas <[email protected]> Signed-off-by: Hangyu Hua <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-03-31can: m_can: m_can_tx_handler(): fix use after free of skbMarc Kleine-Budde1-2/+3
can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch. Fixes: 80646733f11c ("can: m_can: update to support CAN FD features") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Reported-by: Hangyu Hua <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-03-31can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error valueTom Rix1-1/+1
Clang static analysis reports this issue: | mcp251xfd-core.c:1813:7: warning: The left operand | of '&' is a garbage value | FIELD_GET(MCP251XFD_REG_DEVID_ID_MASK, dev_id), | ^ ~~~~~~ dev_id is set in a successful call to mcp251xfd_register_get_dev_id(). Though the status of calls made by mcp251xfd_register_get_dev_id() are checked and handled, their status' are not returned. So return err. Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-03-31can: isotp: restore accidentally removed MSG_PEEK featureOliver Hartkopp1-1/+1
In commit 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when reading from socket") a new check for recvmsg flags has been introduced that only checked for the flags that are handled in isotp_recvmsg() itself. This accidentally removed the MSG_PEEK feature flag which is processed later in the call chain in __skb_try_recv_from_queue(). Add MSG_PEEK to the set of valid flags to restore the feature. Fixes: 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when reading from socket") Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1079554254 Link: https://lore.kernel.org/all/[email protected] Reported-by: Derek Will <[email protected]> Suggested-by: Derek Will <[email protected]> Tested-by: Derek Will <[email protected]> Signed-off-by: Oliver Hartkopp <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-03-30RISC-V: Fix a comment typo in riscv_of_parent_hartid()Atish Patra1-1/+1
This fixes a typo in a comment that is both obvious and went unnoticed. Signed-off-by: Atish Patra <[email protected]> Fixes: a9b202606c69 ("RISC-V: Improve /proc/cpuinfo output for ISA extensions") Signed-off-by: Palmer Dabbelt <[email protected]>
2022-03-30riscv: Increase stack size under KASANDmitry Vyukov1-2/+8
KASAN requires more stack space because of compiler instrumentation. Increase stack size as other arches do. Signed-off-by: Dmitry Vyukov <[email protected]> Reported-by: [email protected] Fixes: 8ad8b72721d0 ("riscv: Add KASAN support") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-03-30riscv: Fix fill_callchain return valueNikita Shubin1-1/+1
perf_callchain_store return 0 on success, -1 otherwise, fix fill_callchain to return correct bool value. Fixes: dbeb90b0c1eb ("riscv: Add perf callchain support") Signed-off-by: Nikita Shubin <[email protected]> Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-03-30riscv: dts: canaan: Fix SPI3 bus widthNiklas Cassel4-0/+8
According to the K210 Standalone SDK Programming guide: https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf Section 15.4.3.3: SPI0 and SPI1 supports: standard, dual, quad and octal transfers. SPI3 supports: standard, dual and quad transfers (octal is not supported). In order to support quad transfers (Quad SPI), SPI3 must have four IO wires connected to the SPI flash. Update the device tree to specify the correct bus width. Tested on maix bit, maix dock and maixduino, which all have the same SPI flash (gd25lq128d) connected to SPI3. maix go is untested, but it would not make sense for this k210 board to be designed differently. Signed-off-by: Niklas Cassel <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Fixes: 8f5b0e79f3e5 ("riscv: Add SiPeed MAIXDUINO board device tree") Fixes: 8194f08bda18 ("riscv: Add SiPeed MAIX GO board device tree") Fixes: a40f920964c4 ("riscv: Add SiPeed MAIX DOCK board device tree") Fixes: 97c279bcf813 ("riscv: Add SiPeed MAIX BiT board device tree") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-03-30Merge branch 'next' into for-linusDmitry Torokhov930-4687/+10396
Prepare input updates for 5.18 merge window.
2022-03-31kbuild: Make $(LLVM) more flexibleNathan Chancellor4-25/+62
The LLVM make variable allows a developer to quickly switch between the GNU and LLVM tools. However, it does not handle versioned binaries, such as the ones shipped by Debian, as LLVM=1 just defines the tool variables with the unversioned binaries. There was some discussion during the review of the patch that introduces LLVM=1 around versioned binaries, ultimately coming to the conclusion that developers can just add the folder that contains the unversioned binaries to their PATH, as Debian's versioned suffixed binaries are really just symlinks to the unversioned binaries in /usr/lib/llvm-#/bin: $ realpath /usr/bin/clang-14 /usr/lib/llvm-14/bin/clang $ PATH=/usr/lib/llvm-14/bin:$PATH make ... LLVM=1 However, that can be cumbersome to developers who are constantly testing series with different toolchains and versions. It is simple enough to support these versioned binaries directly in the Kbuild system by allowing the developer to specify the version suffix with LLVM=, which is shorter than the above suggestion: $ make ... LLVM=-14 It does not change the meaning of LLVM=1 (which will continue to use unversioned binaries) and it does not add too much additional complexity to the existing $(LLVM) code, while allowing developers to quickly test their series with different versions of the whole LLVM suite of tools. Some developers may build LLVM from source but not add the binaries to their PATH, as they may not want to use that toolchain systemwide. Support those developers by allowing them to supply the directory that the LLVM tools are available in, as it is no more complex to support than the version suffix change above. $ make ... LLVM=/path/to/llvm/ Update and reorder the documentation to reflect these new additions. At the same time, notate that LLVM=0 is not the same as just omitting it altogether, which has confused people in the past. Link: https://lore.kernel.org/r/[email protected]/ Link: https://lore.kernel.org/r/[email protected]/ Suggested-by: Masahiro Yamada <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2022-03-31kbuild: add --target to correctly cross-compile UAPI headers with ClangMasahiro Yamada1-1/+1
When you compile-test UAPI headers (CONFIG_UAPI_HEADER_TEST=y) with Clang, they are currently compiled for the host target (likely x86_64) regardless of the given ARCH=. In fact, some exported headers include libc headers. For example, include/uapi/linux/agpgart.h includes <stdlib.h> after being exported. The header search paths should match to the target we are compiling them for. Pick up the --target triple from KBUILD_CFLAGS in the same ways as commit 7f58b487e9ff ("kbuild: make Clang build userprogs for target architecture"). Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]>
2022-03-31fixdep: use fflush() and ferror() to ensure successful write to filesMasahiro Yamada1-27/+19
Currently, fixdep checks the return value from (v)printf(), but it does not ensure the complete write to the .cmd file. printf() just writes data to the internal buffer, which usually succeeds. (Of course, it may fail for another reason, for example when the file descriptor is closed, but that is another story.) When the buffer (4k?) is full, an actual write occurs, and printf() may really fail. One of typical cases is "No space left on device" when the disk is full. The data remaining in the buffer will be pushed out to the file when the program exits, but we never know if it is successful. One straight-forward fix would be to add the following code at the end of the program. ret = fflush(stdout); if (ret < 0) { /* error handling */ } However, it is tedious to check the return code in all the call sites of printf(), fflush(), fclose(), and whatever can cause actual writes to the end device. Doing that lets the program bail out at the first failure but is usually not worth the effort. Instead, let's check the error status from ferror(). This is 'sticky', so you need to check it just once. You still need to call fflush(). Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: David Laight <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]>
2022-03-31arch: syscalls: simplify uapi/kapi directory creationMasahiro Yamada13-26/+13
$(shell ...) expands to empty. There is no need to assign it to _dummy. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]>
2022-03-31usr/include: replace extra-y with always-yMasahiro Yamada1-1/+1
extra-y is not run for 'make modules'. The header compile test should be executed irrespective of the build target. always-y is a better fit. Signed-off-by: Masahiro Yamada <[email protected]>
2022-03-30net: sparx5: uses, depends on BRIDGE or !BRIDGERandy Dunlap1-0/+1
Fix build errors when BRIDGE=m and SPARX5_SWITCH=y: riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L305': sparx5_switchdev.c:(.text+0xdb0): undefined reference to `br_vlan_enabled' riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L283': sparx5_switchdev.c:(.text+0xee0): undefined reference to `br_vlan_enabled' Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Randy Dunlap <[email protected]> Reported-by: kernel test robot <[email protected]> Cc: Horatiu Vultur <[email protected]> Cc: Lars Povlsen <[email protected]> Cc: Steen Hegelund <[email protected]> Cc: [email protected] Cc: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-30Merge branch 'wireguard-patches-for-5-18-rc1'Jakub Kicinski3-22/+12
Jason A. Donenfeld says: ==================== wireguard patches for 5.18-rc1 Here's a small set of fixes for the next net push: 1) Pipacs reported a CFI violation in a cleanup routine, which he triggered using grsec's RAP. I haven't seen reports of this yet from the Android/CFI world yet, but it's only a matter of time there. 2) A small rng cleanup to the self test harness to make it initialize faster on 5.18. 3) Wang reported and fixed a skb leak for CONFIG_IPV6=n. 4) After Wang's fix for the direct leak, I investigated how that code path even could be hit, and found that the netlink layer still handles IPv6 endpoints, when it probably shouldn't. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-30wireguard: socket: ignore v6 endpoints when ipv6 is disabledJason A. Donenfeld1-2/+2
The previous commit fixed a memory leak on the send path in the event that IPv6 is disabled at compile time, but how did a packet even arrive there to begin with? It turns out we have previously allowed IPv6 endpoints even when IPv6 support is disabled at compile time. This is awkward and inconsistent. Instead, let's just ignore all things IPv6, the same way we do other malformed endpoints, in the case where IPv6 is disabled. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-30wireguard: socket: free skb in send6 when ipv6 is disabledWang Hai1-0/+1
I got a memory leak report: unreferenced object 0xffff8881191fc040 (size 232): comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0 [<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340 [<ffffffff832974fb>] __alloc_skb+0x1db/0x200 [<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0 [<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110 [<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30 [<ffffffff8119c558>] process_one_work+0x2e8/0x770 [<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0 [<ffffffff811a88e0>] kthread+0x120/0x160 [<ffffffff8100242f>] ret_from_fork+0x1f/0x30 In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_ buffer_to_peer(), the semantics of send6() is required to free skb. But when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it to fix this bug. Signed-off-by: Wang Hai <[email protected]> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-30wireguard: selftests: simplify RNG seedingJason A. Donenfeld1-19/+7
The seed_rng() function was written to work across lots of old kernels, back when WireGuard used a big compatibility layer. Now that things have evolved, we can vastly simplify this, by just marking the RNG as seeded. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-30wireguard: queueing: use CFI-safe ptr_ring cleanup functionJason A. Donenfeld1-1/+2
We make too nuanced use of ptr_ring to entirely move to the skb_array wrappers, but we at least should avoid the naughty function pointer cast when cleaning up skbs. Otherwise RAP/CFI will honk at us. This patch uses the __skb_array_destroy_skb wrapper for the cleanup, rather than directly providing kfree_skb, which is what other drivers in the same situation do too. Reported-by: PaX Team <[email protected]> Fixes: 886fcee939ad ("wireguard: receive: use ring buffer for incoming handshakes") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-30RISC-V CPU Idle SupportPalmer Dabbelt27-178/+1458
This series adds RISC-V CPU Idle support using SBI HSM suspend function. The RISC-V SBI CPU idle driver added by this series is highly inspired from the ARM PSCI CPU idle driver. Special thanks Sandeep Tripathy for providing early feeback on SBI HSM support in all above projects (RISC-V SBI specification, OpenSBI, and Linux RISC-V). * palmer/riscv-idle: RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine dt-bindings: Add common bindings for ARM and RISC-V idle states cpuidle: Add RISC-V SBI CPU idle driver cpuidle: Factor-out power domain related code from PSCI domain driver RISC-V: Add SBI HSM suspend related defines RISC-V: Add arch functions for non-retentive suspend entry/exit RISC-V: Rename relocate() and make it global RISC-V: Enable CPU_IDLE drivers
2022-03-30mm: page_alloc: validate buddy before check its migratetype.Zi Yan1-0/+3
Whenever a buddy page is found, page_is_buddy() should be called to check its validity. Add the missing check during pageblock merge check. Fixes: 1dd214b8f21c ("mm: page_alloc: avoid merging non-fallbackable pageblocks with others") Link: https://lore.kernel.org/all/[email protected]/ Reported-and-tested-by: Steven Rostedt <[email protected]> Signed-off-by: Zi Yan <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-03-30riscv: Rename "sp_in_global" to "current_stack_pointer"Kees Cook3-4/+5
To follow the existing per-arch conventions, rename "sp_in_global" to "current_stack_pointer". This will let it be used in non-arch places (like HARDENED_USERCOPY). Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2022-03-30Merge tag 'for-5.18/parisc-2' of ↵Linus Torvalds25-206/+312
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc architecture updates from Helge Deller: - Revert a patch to the invalidate/flush vmap routines which broke kernel patching functions on older PA-RISC machines. - Fix the kernel patching code wrt locking and flushing. Works now on B160L machine as well. - Fix CPU IRQ affinity for LASI, WAX and Dino chips - Add CPU hotplug support - Detect the hppa-suse-linux-gcc compiler when cross-compiling * tag 'for-5.18/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix patch code locking and flushing parisc: Find a new timesync master if current CPU is removed parisc: Move common_stext into .text section when CONFIG_HOTPLUG_CPU=y parisc: Rewrite arch_cpu_idle_dead() for CPU hotplugging parisc: Implement __cpu_die() and __cpu_disable() for CPU hotplugging parisc: Add PDC locking functions for rendezvous code parisc: Move disable_sr_hashing_asm() into .text section parisc: Move CPU startup-related functions into .text section parisc: Move store_cpu_topology() into text section parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY parisc: Ensure set_firmware_width() is called only once parisc: Add constants for control registers and clean up mfctl() parisc: Detect hppa-suse-linux-gcc compiler for cross-building parisc: Clean up cpu_check_affinity() and drop cpu_set_affinity_irq() parisc: Fix CPU affinity for Lasi, WAX and Dino chips Revert "parisc: Fix invalidate/flush vmap routines"
2022-03-30Merge tag 'modules-5.18-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module update from Luis Chamberlain: "There is only one patch which qualifies for modules for v5.18-rc1 and its a small fix from Dan Carpenter for lib/test_kmod module. The rest of the changes are too major and landed in modules-testing too late for inclusion. The good news is that most of the major changes for v5.19 is going to be tested very early through linux-next. This simple fix is all we have for modules for v5.18-rc1" * tag 'modules-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: lib/test: use after free in register_test_dev_kmod()
2022-03-30drm/panel-edp: Fix AUO B133UAN01 panel idMatthias Kaehlcke1-1/+1
Two digits are swapped in the AUO B133UAN01 panel id (0x8495 instead of 0x8594). This went initially unnoticed because the panel is still detected, though it is set up with a conservative default timing. Fix the digit swap. Fixes: ec57376fba5a ("drm/panel-edp: Add AUO B133UAN01") Signed-off-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20220330090435.1.Id1522250dd07a6b574c1cc7826023fc6acd141b4@changeid
2022-03-30docs: Add a document on how to fix a messy diffstatJonathan Corbet2-0/+97
A branch with merges in will sometimes create a diffstat containing a lot of unrelated work at "git request-pull" time. Create a document based on Linus's advice (found in the links below) and add it to the maintainer manual in the hope of saving some wear on Linus's keyboard going forward. Link: https://lore.kernel.org/lkml/CAHk-=wg3wXH2JNxkQi+eLZkpuxqV+wPiHhw_Jf7ViH33Sw7PHA@mail.gmail.com/ Link: https://lore.kernel.org/lkml/CAHk-=wgXbSa8yq8Dht8at+gxb_idnJ7X5qWZQWRBN4_CUPr=eQ@mail.gmail.com/ Acked-by: Borislav Petkov <[email protected]> Reviewed-by: Akira Yokosawa <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]>
2022-03-30docs: sphinx/requirements: Limit jinja2<3.1Akira Yokosawa1-0/+2
jinja2 release 3.1.0 (March 24, 2022) broke Sphinx<4.0. This looks like the result of deprecating Python 3.6. It has been tested against Sphinx 4.3.0 and later. Setting an upper limit of <3.1 to junja2 can unbreak Sphinx<4.0 including Sphinx 2.4.4. Signed-off-by: Akira Yokosawa <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: [email protected] # v5.15+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Corbet <[email protected]>
2022-03-30sfc: Avoid NULL pointer dereference on systems without numa awarenessMartin Habets1-7/+4
On such systems cpumask_of_node() returns NULL, which bitmap operations are not happy with. Fixes: c265b569a45f ("sfc: default config to 1 channel/core in local NUMA node only") Fixes: 09a99ab16c60 ("sfc: set affinity hints in local NUMA node only") Signed-off-by: Martin Habets <[email protected]> Reviewed-by: Íñigo Huguet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-30ptp: ocp: handle error from nvmem_device_findJonathan Lemon1-7/+8
nvmem_device_find returns a valid pointer or IS_ERR(). Handle this properly. Fixes: 0cfcdd1ebcfe ("ptp: ocp: add nvmem interface for accessing eeprom") Signed-off-by: Jonathan Lemon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-30net: dsa: felix: fix possible NULL pointer dereferenceZheng Yongjun1-0/+4
As the possible failure of the allocation, kzalloc() may return NULL pointer. Therefore, it should be better to check the 'sgi' in order to prevent the dereference of NULL pointer. Fixes: 23ae3a7877718 ("net: dsa: felix: add stream gate settings for psfp"). Signed-off-by: Zheng Yongjun <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-30drbd: fix potential silent data corruptionLars Ellenberg1-1/+2
Scenario: --------- bio chain generated by blk_queue_split(). Some split bio fails and propagates its error status to the "parent" bio. But then the (last part of the) parent bio itself completes without error. We would clobber the already recorded error status with BLK_STS_OK, causing silent data corruption. Reproducer: ----------- How to trigger this in the real world within seconds: DRBD on top of degraded parity raid, small stripe_cache_size, large read_ahead setting. Drop page cache (sysctl vm.drop_caches=1, fadvise "DONTNEED", umount and mount again, "reboot"). Cause significant read ahead. Large read ahead request is split by blk_queue_split(). Parts of the read ahead that are already in the stripe cache, or find an available stripe cache to use, can be serviced. Parts of the read ahead that would need "too much work", would need to wait for a "stripe_head" to become available, are rejected immediately. For larger read ahead requests that are split in many pieces, it is very likely that some "splits" will be serviced, but then the stripe cache is exhausted/busy, and the remaining ones will be rejected. Signed-off-by: Lars Ellenberg <[email protected]> Signed-off-by: Christoph Böhmwalder <[email protected]> Cc: <[email protected]> # 4.13.x Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-03-30MIPS: rb532: move GPIOD definition into C-filesJackie Liu2-9/+10
My kernel robot reports build error from drivers/iio/adc/da9150-gpadc.c, drivers/iio/adc/da9150-gpadc.c:254:13: error: ‘DA9150_GPADC_CHAN_0x08’ undeclared here (not in a function); did you mean ‘DA9150_GPADC_CHAN_TBAT’? 254 | .channel = DA9150_GPADC_CHAN_##_id, We define GPIOD in rb.h, in fact it should only be used in gpio.c, but it affects the driver da9150-gpadc.c which goes against the original intention of the design, just move it to its scope. Fixes: 1b432840d0a4 ("MIPS: RB532: GPIO register offsets are relative to GPIOBASE") Suggested-by: Jonathan Cameron <[email protected]> Suggested-by: Andy Shevchenko <[email protected]> Reported-by: k2ci <[email protected]> Signed-off-by: Jackie Liu <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-03-30MIPS: lantiq: check the return value of kzalloc()Xiaoke Wang3-16/+34
kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check the return value of it to prevent potential wrong memory access or memory leak. Signed-off-by: Xiaoke Wang <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-03-30mips: sgi-ip22: add a check for the return of kzalloc()Xiaoke Wang1-0/+2
kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access. Signed-off-by: Xiaoke Wang <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-03-30Merge tag 'pwm/for-5.18-rc1' of ↵Linus Torvalds38-401/+492
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This contains conversions of some more drivers to the atomic API as well as the addition of new chip support for some existing drivers. There are also various minor fixes and cleanups across the board, from drivers to device tree bindings" * tag 'pwm/for-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (45 commits) pwm: rcar: Simplify multiplication/shift logic dt-bindings: pwm: renesas,tpu: Do not require pwm-cells twice dt-bindings: pwm: tiehrpwm: Do not require pwm-cells twice dt-bindings: pwm: tiecap: Do not require pwm-cells twice dt-bindings: pwm: samsung: Do not require pwm-cells twice dt-bindings: pwm: intel,keembay: Do not require pwm-cells twice dt-bindings: pwm: brcm,bcm7038: Do not require pwm-cells twice dt-bindings: pwm: toshiba,visconti: Include generic PWM schema dt-bindings: pwm: renesas,pwm: Include generic PWM schema dt-bindings: pwm: sifive: Include generic PWM schema dt-bindings: pwm: rockchip: Include generic PWM schema dt-bindings: pwm: mxs: Include generic PWM schema dt-bindings: pwm: iqs620a: Include generic PWM schema dt-bindings: pwm: intel,lgm: Include generic PWM schema dt-bindings: pwm: imx: Include generic PWM schema dt-bindings: pwm: allwinner,sun4i-a10: Include generic PWM schema pwm: pwm-mediatek: Beautify error messages text pwm: pwm-mediatek: Allocate clk_pwms with devm_kmalloc_array pwm: pwm-mediatek: Simplify error handling with dev_err_probe() pwm: brcmstb: Remove useless locking ...
2022-03-30Merge tag 'regulator-fix-v5.18' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes for the rt4831 driver which fix features that didn't work due to incomplete description of the register configuration" * tag 'regulator-fix-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: rt4831: Add active_discharge_on to fix discharge API regulator: rt4831: Add bypass mask to fix set_bypass API work
2022-03-30Merge tag 'dmaengine-5.18-rc1' of ↵Linus Torvalds26-103/+383
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "This time we have bunch of driver updates and some new device support. New support: - Document RZ/V2L and RZ/G2UL dma binding - TI AM62x k3-udma and k3-psil support Updates: - Yaml conversion for Mediatek uart apdma schema - Removal of DMA-32 fallback configuration for various drivers - imx-sdma updates for channel restart" * tag 'dmaengine-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits) dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma dmaengine: dw-axi-dmac: cleanup comments dmaengine: fsl-dpaa2-qdma: Drop comma after SoC match table sentinel dt-bindings: dma: Convert mtk-uart-apdma to DT schema dmaengine: ppc4xx: Make use of the helper macro LIST_HEAD() dmaengine: idxd: Remove useless DMA-32 fallback configuration dmaengine: qcom_hidma: Remove useless DMA-32 fallback configuration dmaengine: sh: Kconfig: Add ARCH_R9A07G054 dependency for RZ_DMAC config option dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data dmaengine: ti: k3-udma: Add AM62x DMSS support dmaengine: ti: cleanup comments dmaengine: imx-sdma: clean up some inconsistent indenting dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error" dmaengine: idxd: restore traffic class defaults after wq reset dmaengine: altera-msgdma: Remove useless DMA-32 fallback configuration dmaengine: stm32-dma: set dma_device max_sg_burst dmaengine: imx-sdma: fix cyclic buffer race condition dmaengine: imx-sdma: restart cyclic channel if needed dmaengine: iot: Remove useless DMA-32 fallback configuration dmaengine: ptdma: handle the cases based on DMA is complete ...
2022-03-30Merge tag 'rproc-v5.18' of ↵Linus Torvalds22-280/+1305
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "In the remoteproc core, it's now possible to mark the sysfs attributes read only on a per-instance basis, which is then used by the TI wkup M3 driver. Also, the rproc_shutdown() interface propagates errors to the caller and an array underflow is fixed in the debugfs interface. The rproc_da_to_va() API is moved to the public API to allow e.g. child rpmsg devices to acquire pointers to memory shared with the remote processor. The TI K3 R5F and DSP drivers gains support for attaching to instances already started by the bootloader, aka IPC-only mode. The Mediatek remoteproc driver gains support for the MT8186 SCP. The driver's probe function is reordered and moved to use the devres version of rproc_alloc() to save a few gotos. The driver's probe function is also transitioned to use dev_err_probe() to provide better debug support. Support for the Qualcomm SC7280 Wireless Subsystem (WPSS) is introduced. The Hexagon based remoteproc drivers gains support for voting for interconnect bandwidth during launch of the remote processor. The modem subsystem (MSS) driver gains support for probing the BAM-DMUX driver, which provides the network interface towards the modem on a set of older Qualcomm platforms. In addition a number a bug fixes are introduces in the Qualcomm drivers. Lastly Qualcomm ADSP DeviceTree binding is converted to YAML format, to allow validation of DeviceTree source files" * tag 'rproc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits) remoteproc: qcom_q6v5_mss: Create platform device for BAM-DMUX remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS dt-bindings: remoteproc: qcom: Add SC7280 WPSS support dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML remoteproc: k3-dsp: Add support for IPC-only mode for all K3 DSPs remoteproc: k3-dsp: Refactor mbox request code in start remoteproc: k3-r5: Add support for IPC-only mode for all R5Fs remoteproc: k3-r5: Refactor mbox request code in start remoteproc: Change rproc_shutdown() to return a status remoteproc: qcom: q6v5: Add interconnect path proxy vote remoteproc: mediatek: Support mt8186 scp dt-bindings: remoteproc: mediatek: Add binding for mt8186 scp remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region remoteproc: move rproc_da_to_va declaration to remoteproc.h remoteproc: wkup_m3: Set sysfs_read_only flag remoteproc: Introduce sysfs_read_only flag remoteproc: Fix count check in rproc_coredump_write() remoteproc: mtk_scp: Use dev_err_probe() where possible ...
2022-03-30Merge tag 'hwlock-v5.18' of ↵Linus Torvalds3-37/+3
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull hwspinlock updates from Bjorn Andersson: "This updates sprd and srm32 drivers to use struct_size() instead of their open-coded equivalents. It also cleans up the omap dt-bindings example" * tag 'hwlock-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: hwspinlock: sprd: Use struct_size() helper in devm_kzalloc() hwspinlock: stm32: Use struct_size() helper in devm_kzalloc() dt-bindings: hwlock: omap: Remove redundant binding example
Powered by cgit, Gruvboxed by Blaster4385.