aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-18Blackfin: dnp5370: drop MMC card detect supportAndreas Schallenberg1-20/+0
The board doesn't actually have a pin hooked up to do card detection, so punt the code for it. Signed-off-by: Andreas Schallenberg <[email protected]> Signed-off-by: Mike Frysinger <[email protected]>
2011-03-18Blackfin: add bfin_write_{or,and} helpersMike Frysinger1-2/+14
Signed-off-by: Mike Frysinger <[email protected]>
2011-03-18Blackfin: bf548-ezkit: add CAN1 supportAaron Wu1-7/+48
Signed-off-by: Aaron Wu <[email protected]> Signed-off-by: Mike Frysinger <[email protected]>
2011-03-18Blackfin: bf54x: add kconfig for UART2/3 DMA channel assignmentssteven miao4-21/+102
The BF54x lacks dedicated DMA channels for the UART peripherals and need to be muxed between others. So add a kconfig option so people can select which channels the UARTs will use so they can pick between SPORTs and the less commonly used EPPI/PIXC peripherals. Signed-off-by: steven miao <[email protected]> Signed-off-by: Mike Frysinger <[email protected]>
2011-03-18Blackfin: SMP: avoid section mismatch warningsSonic Zhang1-1/+1
Since coreb_trampoline_start() calls coreb_start(), they need to be in the same section. Signed-off-by: Sonic Zhang <[email protected]> Signed-off-by: Mike Frysinger <[email protected]>
2011-03-18Merge branch 'topic/misc' into for-linusTakashi Iwai91-6530/+9928
2011-03-18ALSA: sound/pci/asihpi: check adapter index in hpi_ioctlDan Rosenberg1-0/+5
The user-supplied index into the adapters array needs to be checked, or an out-of-bounds kernel pointer could be accessed and used, leading to potentially exploitable memory corruption. Signed-off-by: Dan Rosenberg <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-03-18ALSA: aloop - Fix possible IRQ lock inversionTakashi Iwai1-10/+9
loopback_pos_update() can be called in the timer callback, thus the lock held should be irq-safe. Otherwise you'll get AB/BA deadlock together with substream->self_group.lock. Reported-and-tested-by: Knut Petersen <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-03-17gpio/langwell: Clear edge bit before handlingThomas Gleixner1-7/+6
I don't have the specs for this beast, but it looks a lot like the PXA GPIO block. Though I bet it's the same IP and the driver should have reused the PXA code. Acknowleding the edge detect status after handling one or more gpio interrupts looks wrong. We might lose an edge which came in while we handled the previous one. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Alek Du <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds58-1007/+1648
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (27 commits) arch/tile: support newer binutils assembler shift semantics arch/tile: fix deadlock bugs in rwlock implementation drivers/edac: provide support for tile architecture tile on-chip network driver: sync up with latest fixes arch/tile: support 4KB page size as well as 64KB arch/tile: add some more VMSPLIT options and use consistent naming arch/tile: fix some comments and whitespace arch/tile: export some additional module symbols arch/tile: enhance existing finv_buffer_remote() routine arch/tile: fix two bugs in the backtracer code arch/tile: use extended assembly to inline __mb_incoherent() arch/tile: use a cleaner technique to enable interrupt for cpu_idle() arch/tile: sync up with <arch/sim.h> and <arch/sim_def.h> changes arch/tile: fix reversed test of strict_strtol() return value arch/tile: avoid a simulator warning during bootup arch/tile: export <asm/hardwall.h> to userspace arch/tile: warn and retry if an IPI is not accepted by the target cpu arch/tile: stop disabling INTCTRL_1 interrupts during hypervisor downcalls arch/tile: fix __ndelay etc to work better arch/tile: bug fix: exec'ed task thought it was still single-stepping ... Fix up trivial conflict in arch/tile/kernel/vmlinux.lds.S (percpu alignment vs section naming convention fix)
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds225-5068/+18848
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-17Merge branch 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds65-1021/+1976
* 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm: (46 commits) msm: scm: Check for interruption immediately msm: scm: Fix improper register assignment msm: scm: Mark inline asm as volatile msm: iommu: Enable HTW L2 redirection on MSM8960 msm: iommu: Don't read from write-only registers msm: iommu: Remove dependency on IDR msm: iommu: Use ASID tagging instead of VMID tagging msm: iommu: Rework clock logic and add IOMMU bus clock control msm: iommu: Clock control for the IOMMU driver msm: mdp: Set the correct pack pattern for XRGB/ARGB msm_fb: Fix framebuffer console msm: mdp: Add support for RGBX 8888 image format. video: msmfb: Put the partial update magic value into the fix_screen struct. msm: clock: Migrate to clkdev msm: clock: Remove references to clk_ops_pcom msm: headsmp.S: Fix section mismatch msm: Use explicit GPLv2 licenses msm: iommu: Enable IOMMU support for MSM8960 msm: iommu: Generalize platform data for multiple targets msm: iommu: Create a Kconfig item for the IOMMU driver ...
2011-03-17vfs: split off vfsmount-related parts of vfs_kern_mount()Al Viro3-122/+132
new function: mount_fs(). Does all work done by vfs_kern_mount() except the allocation and filling of vfsmount; returns root dentry or ERR_PTR(). vfs_kern_mount() switched to using it and taken to fs/namespace.c, along with its wrappers. alloc_vfsmnt()/free_vfsmnt() made static. functions in namespace.c slightly reordered. Signed-off-by: Al Viro <[email protected]>
2011-03-17Some fixes for pstoreTony Luck1-60/+56
1) Change from ->get_sb() to ->mount() 2) Use mount_single() instead of mount_nodev() 3) Pulled in ramfs_get_inode() & trimmed to what I need for pstore 4) Drop the ugly pstore_writefile() Just save data using kmalloc() and provide a pstore_file_read() that uses simple_read_from_buffer(). Signed-off-by: Al Viro <[email protected]>
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds427-5778/+20368
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-17Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of ↵Linus Torvalds25-356/+1710
master.kernel.org:/home/rmk/linux-2.6-arm * 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6647/1: add Versatile Express defconfig ARM: 6644/1: mach-ux500: update the U8500 defconfig * 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6764/1: pl011: factor out FIFO to TTY code ARM: 6763/1: pl011: add optional RX DMA to PL011 v2 ARM: 6758/1: amba: support pm ops ARM: amba: make amba_driver id_table const ARM: amba: make internal ID table handling const ARM: amba: make probe() functions take const id tables ARM: 6662/1: amba: make amba_bustype non-static ARM: mmci: add dmaengine-based DMA support ARM: mmci: no need for separate host->data_xfered ARM: mmci: avoid unnecessary switch to data available PIO interrupts ARM: mmci: no need to call flush_dcache_page() with sg_miter API ARM: mmci: avoid reporting too many completed bytes on fifo overrun ALSA: AACI: make fifo variables more explanitory ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period ALSA: AACI: use snd_pcm_lib_period_bytes() ALSA: AACI: clean up AACI announcement printk ALSA: AACI: fix channel mask selection ALSA: AACI: fix number of channels for record ALSA: AACI: fix multiple IRQ claiming * 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var() VIDEO: cyberpro: remove useless function extreg pointers VIDEO: cyberpro: update handling of device structures VIDEO: cyberpro: add support for video capture I2C VIDEO: cyberpro: make 'reg_b0_lock' always present VIDEO: cyberpro: add I2C support VIDEO: cyberpro: select lowest multipler/divisor for PLL
2011-03-17Merge branch 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds33-400/+554
* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (55 commits) KVM: unbreak userspace that does not sets tss address KVM: MMU: cleanup pte write path KVM: MMU: introduce a common function to get no-dirty-logged slot KVM: fix rcu usage in init_rmode_* functions KVM: fix kvmclock regression due to missing clock update KVM: emulator: Fix permission checking in io permission bitmap KVM: emulator: Fix io permission checking for 64bit guest KVM: SVM: Load %gs earlier if CONFIG_X86_32_LAZY_GS=n KVM: x86: Remove useless regs_page pointer from kvm_lapic KVM: improve comment on rcu use in irqfd_deassign KVM: MMU: remove unused macros KVM: MMU: cleanup page alloc and free KVM: MMU: do not record gfn in kvm_mmu_pte_write KVM: MMU: move mmu pages calculated out of mmu lock KVM: MMU: set spte accessed bit properly KVM: MMU: fix kvm_mmu_slot_remove_write_access dropping intermediate W bits KVM: Start lock documentation KVM: better readability of efer_reserved_bits KVM: Clear async page fault hash after switching to real mode KVM: VMX: Initialize vm86 TSS only once. ...
2011-03-17Merge branch 'stable/xen.pm.bug-fixes' of ↵Linus Torvalds5-14/+30
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/xen.pm.bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: use freeze/restore/thaw PM events for suspend/resume/chkpt xen: xenbus PM events support
2011-03-17kill simple_set_mnt()Al Viro2-9/+0
not needed anymore, since all users (->get_sb() instances) are gone. Signed-off-by: Al Viro <[email protected]>
2011-03-17Merge branches 'stable/irq.fairness' and 'stable/irq.ween_of_nr_irqs' of ↵Linus Torvalds3-204/+300
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/irq.fairness' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: events: Remove redundant clear of l2i at end of round-robin loop xen: events: Make round-robin scan fairer by snapshotting each l2 word once only xen: events: Clean up round-robin evtchn scan. xen: events: Make last processed event channel a per-cpu variable. xen: events: Process event channels notifications in round-robin order. * 'stable/irq.ween_of_nr_irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: events: Fix compile error if CONFIG_SMP is not defined. xen: events: correct locking in xen_irq_from_pirq xen: events: propagate irq allocation failure instead of panicking xen: events: do not workaround too-small nr_irqs xen: events: remove use of nr_irqs as upper bound on number of pirqs xen: events: dynamically allocate irq info structures xen: events: maintain a list of Xen interrupts xen: events: push setup of irq<->{evtchn,ipi,virq,pirq} maps into irq_info init functions xen: events: turn irq_info constructors into initialiser functions xen: events: use per-cpu variable for cpu_evtchn_mask xen: events: refactor GSI pirq bindings functions xen: events: rename restore_cpu_pirqs -> restore_pirqs xen: events: remove unused public functions xen: events: fix xen_map_pirq_gsi error return xen: events: simplify comment xen: events: separate two unrelated halves of if condition Fix up trivial conflicts in drivers/xen/events.c
2011-03-17Merge branches 'stable/hvc-console', 'stable/gntalloc.v6' and ↵Linus Torvalds12-386/+1325
'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/hvc-console' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/hvc: Disable probe_irq_on/off from poking the hvc-console IRQ line. * 'stable/gntalloc.v6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: gntdev: fix build warning xen/p2m/m2p/gnttab: do not add failed grant maps to m2p override xen-gntdev: Add cast to pointer xen-gntdev: Fix incorrect use of zero handle xen: change xen/[gntdev/gntalloc] to default m xen-gntdev: prevent using UNMAP_NOTIFY_CLEAR_BYTE on read-only mappings xen-gntdev: Avoid double-mapping memory xen-gntdev: Avoid unmapping ranges twice xen-gntdev: Use map->vma for checking map validity xen-gntdev: Fix unmap notify on PV domains xen-gntdev: Fix memory leak when mmap fails xen/gntalloc,gntdev: Add unmap notify ioctl xen-gntalloc: Userspace grant allocation driver xen-gntdev: Support mapping in HVM domains xen-gntdev: Add reference counting to maps xen-gntdev: Use find_vma rather than iterating our vma list manually xen-gntdev: Change page limit to be global instead of per-open * 'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (24 commits) xen-gntdev: Use ballooned pages for grant mappings xen-balloon: Add interface to retrieve ballooned pages xen-balloon: Move core balloon functionality out of module xen/balloon: Remove pr_info's and don't alter retry_count xen/balloon: Protect against CPU exhaust by event/x process xen/balloon: Migration from mod_timer() to schedule_delayed_work() xen/balloon: Removal of driver_pages
2011-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds145-2733/+15384
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits) [SCSI] scsi_dh_rdac: Add MD36xxf into device list [SCSI] scsi_debug: add consecutive medium errors [SCSI] libsas: fix ata list corruption issue [SCSI] hpsa: export resettable host attribute [SCSI] hpsa: move device attributes to avoid forward declarations [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26) [SCSI] sd: Logical Block Provisioning update [SCSI] Include protection operation in SCSI command trace [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try) [SCSI] target: Fix volume size misreporting for volumes > 2TB [SCSI] bnx2fc: Broadcom FCoE offload driver [SCSI] fcoe: fix broken fcoe interface reset [SCSI] fcoe: precedence bug in fcoe_filter_frames() [SCSI] libfcoe: Remove stale fcoe-netdev entries [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out" [SCSI] libfc: Fixing a memory leak when destroying an interface [SCSI] megaraid_sas: Version and Changelog update ... Fix up trivial conflicts due to whitespace differences in drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-03-17Merge branch 'next' of ↵Linus Torvalds11-248/+36
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] pcc-cpufreq: remove duplicate statements [CPUFREQ] Remove the pm_message_t argument from driver suspend [CPUFREQ] Remove unneeded locks [CPUFREQ] Remove old, deprecated per cpu ondemand/conservative sysfs files [CPUFREQ] Remove deprecated sysfs file sampling_rate_max [CPUFREQ] powernow-k8: The table index is not worth displaying [CPUFREQ] calculate delay after dbs_check_cpu [CPUFREQ] Add documentation for sampling_down_factor [CPUFREQ] drivers/cpufreq: Remove unnecessary semicolons
2011-03-17Merge branch 'for_linus' of ↵Linus Torvalds6-13/+23
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: ext3: Always set dx_node's fake_dirent explicitly. ext3: Fix an overflow in ext3_trim_fs. jbd: Remove one to many n's in a word. ext3: skip orphan cleanup on rocompat fs ext2: Fix link count corruption under heavy link+rename load ext3: speed up group trim with the right free block count. ext3: Adjust trim start with first_data_block. quota: return -ENOMEM when memory allocation fails
2011-03-17Merge branch 'nfs-for-2.6.39' of ↵Linus Torvalds40-800/+1600
git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'nfs-for-2.6.39' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (54 commits) RPC: killing RPC tasks races fixed xprt: remove redundant check SUNRPC: Convert struct rpc_xprt to use atomic_t counters SUNRPC: Ensure we always run the tk_callback before tk_action sunrpc: fix printk format warning xprt: remove redundant null check nfs: BKL is no longer needed, so remove the include NFS: Fix a warning in fs/nfs/idmap.c Cleanup: Factor out some cut-and-paste code. cleanup: save 60 lines/100 bytes by combining two mostly duplicate functions. NFS: account direct-io into task io accounting gss:krb5 only include enctype numbers in gm_upcall_enctypes RPCRDMA: Fix FRMR registration/invalidate handling. RPCRDMA: Fix to XDR page base interpretation in marshalling logic. NFSv4: Send unmapped uid/gids to the server when using auth_sys NFSv4: Propagate the error NFS4ERR_BADOWNER to nfs4_do_setattr NFSv4: cleanup idmapper functions to take an nfs_server argument NFSv4: Send unmapped uid/gids to the server if the idmapper fails NFSv4: If the server sends us a numeric uid/gid then accept it NFSv4.1: reject zero layout with zeroed stripe unit ...
2011-03-17Merge branch 'for_linus' of ↵Linus Torvalds5-172/+236
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: UDF: Fix compiler warning udf: Convert UDF to new truncate calling sequence
2011-03-17Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds8-1043/+842
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (38 commits) amd64_edac: Fix decode_syndrome types amd64_edac: Fix DCT argument type amd64_edac: Fix ranges signedness amd64_edac: Drop local variable amd64_edac: Fix PCI config addressing types amd64_edac: Fix DRAM base macros amd64_edac: Fix node id signedness amd64_edac: Drop redundant declarations amd64_edac: Enable driver on F15h amd64_edac: Adjust ECC symbol size to F15h amd64_edac: Simplify scrubrate setting PCI: Rename CPU PCI id define amd64_edac: Improve DRAM address mapping amd64_edac: Sanitize ->read_dram_ctl_register amd64_edac: Adjust sys_addr to chip select conversion routine to F15h amd64_edac: Beef up early exit reporting amd64_edac: Revamp online spare handling amd64_edac: Fix channel interleave removal amd64_edac: Correct node interleaving removal amd64_edac: Add support for interleaved region swapping ... Fix up trivial conflict in include/linux/pci_ids.h due to AMD_15H_NB_MISC being renamed as AMD_15H_NB_F3 next to the new AMD_15H_NB_LINK entry.
2011-03-17Merge branch 'for-linus/2639/i2c-1' of git://git.fluff.org/bjdooks/linuxLinus Torvalds5-1/+1157
* 'for-linus/2639/i2c-1' of git://git.fluff.org/bjdooks/linux: i2c-mpc: Add support for 64bit system i2c: add driver for Freescale i.MX28 i2c: tegra: Add i2c support
2011-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds42-92/+1498
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: booke_wdt: clean up status messages watchdog: cleanup spaces before tabs watchdog: convert to DEFINE_PCI_DEVICE_TABLE watchdog: Xen watchdog driver watchdog: Intel SCU Watchdog Timer Driver for Moorestown and Medfield platforms. watchdog: jz4740_wdt - fix magic character checking watchdog: add JZ4740 watchdog driver watchdog: it87_wdt: Add support for IT8721F watchdog watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabled watchdog: hpwdt: Fix a couple of typos
2011-03-17Merge branch 'hwmon-for-linus' of ↵Linus Torvalds25-585/+6208
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (44 commits) hwmon: (lineage-pem): Fix in1 voltage alarm sysfs attributes hwmon/f71882fg: Add support for f71808e hwmon/f71882fg: Add support for f71869f and f71869e hwmon/f71882fg: Add support for f71889ed hwmon/f71882fg: Break out test for auto pwm's controlled by digital readings hwmon/f71882fg: Separate temp beep sysfs attr from the other temp sysfs attr hwmon/f71882fg: Remove bogus temp2_type for certain models hwmon/f71882fg: Make number of temps configurable hwmon/f71882fg: Make creation of in sysfs attributes more generic hwmon/f71882fg: Only allow negative auto point temps if fan_neg_temp is enabled hwmon/f71882fg: Fix temp1 sensor type reporting hwmon: (w83627ehf) Display correct temperature sensor labels for systems with NCT6775F hwmon: (w83627ehf) Add fan debounce support for NCT6775F and NCT6776F hwmon: (w83627ehf) Update Kconfig for W83677HG-B, NCT6775F and NCT6776F hwmon: (w83627ehf) Store rpm instead of raw fan speed data hwmon: (w83627ehf) Use 16 bit fan count registers if supported hwmon: (w83627ehf) Add support for Nuvoton NCT6775F and NCT6776F hwmon: (w83627ehf) Permit enabling SmartFan IV mode if configured at startup hwmon: (w83627ehf) Convert register arrays to 16 bit, and convert access to pointers hwmon: (w83627ehf) Remove references to datasheets which no longer exist ...
2011-03-17smp_call_function_interrupt: use typedef and %pfMilton Miller1-8/+8
Use the newly added smp_call_func_t in smp_call_function_interrupt for the func variable, and make the comment above the WARN more assertive and explicit. Also, func is a function pointer and does not need an offset, so use %pf not %pS. Signed-off-by: Milton Miller <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-17smp_call_function_many: handle concurrent clearing of maskMilton Miller1-3/+10
Mike Galbraith reported finding a lockup ("perma-spin bug") where the cpumask passed to smp_call_function_many was cleared by other cpu(s) while a cpu was preparing its call_data block, resulting in no cpu to clear the last ref and unlock the block. Having cpus clear their bit asynchronously could be useful on a mask of cpus that might have a translation context, or cpus that need a push to complete an rcu window. Instead of adding a BUG_ON and requiring yet another cpumask copy, just detect the race and handle it. Note: arch_send_call_function_ipi_mask must still handle an empty cpumask because the data block is globally visible before the that arch callback is made. And (obviously) there are no guarantees to which cpus are notified if the mask is changed during the call; only cpus that were online and had their mask bit set during the whole call are guaranteed to be called. Reported-by: Mike Galbraith <[email protected]> Reported-by: Jan Beulich <[email protected]> Acked-by: Jan Beulich <[email protected]> Cc: [email protected] Signed-off-by: Milton Miller <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-17call_function_many: add missing orderingMilton Miller1-13/+33
Paul McKenney's review pointed out two problems with the barriers in the 2.6.38 update to the smp call function many code. First, a barrier that would force the func and info members of data to be visible before their consumption in the interrupt handler was missing. This can be solved by adding a smp_wmb between setting the func and info members and setting setting the cpumask; this will pair with the existing and required smp_rmb ordering the cpumask read before the read of refs. This placement avoids the need a second smp_rmb in the interrupt handler which would be executed on each of the N cpus executing the call request. (I was thinking this barrier was present but was not). Second, the previous write to refs (establishing the zero that we the interrupt handler was testing from all cpus) was performed by a third party cpu. This would invoke transitivity which, as a recient or concurrent addition to memory-barriers.txt now explicitly states, would require a full smp_mb(). However, we know the cpumask will only be set by one cpu (the data owner) and any preivous iteration of the mask would have cleared by the reading cpu. By redundantly writing refs to 0 on the owning cpu before the smp_wmb, the write to refs will follow the same path as the writes that set the cpumask, which in turn allows us to keep the barrier in the interrupt handler a smp_rmb instead of promoting it to a smp_mb (which will be be executed by N cpus for each of the possible M elements on the list). I moved and expanded the comment about our (ab)use of the rcu list primitives for the concurrent walk earlier into this function. I considered moving the first two paragraphs to the queue list head and lock, but felt it would have been too disconected from the code. Cc: Paul McKinney <[email protected]> Cc: [email protected] (2.6.32 and later) Signed-off-by: Milton Miller <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-17call_function_many: fix list delete vs add raceMilton Miller1-7/+13
Peter pointed out there was nothing preventing the list_del_rcu in smp_call_function_interrupt from running before the list_add_rcu in smp_call_function_many. Fix this by not setting refs until we have gotten the lock for the list. Take advantage of the wmb in list_add_rcu to save an explicit additional one. I tried to force this race with a udelay before the lock & list_add and by mixing all 64 online cpus with just 3 random cpus in the mask, but was unsuccessful. Still, inspection shows a valid race, and the fix is a extension of the existing protection window in the current code. Cc: [email protected] (v2.6.32 and later) Reported-by: Peter Zijlstra <[email protected]> Signed-off-by: Milton Miller <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-17mm: PageBuddy and mapcount robustnessAndrea Arcangeli2-4/+11
Change the _mapcount value indicating PageBuddy from -2 to -128 for more robusteness against page_mapcount() undeflows. Use reset_page_mapcount instead of __ClearPageBuddy in bad_page to ignore the previous retval of PageBuddy(). Signed-off-by: Andrea Arcangeli <[email protected]> Reported-by: Hugh Dickins <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-17gpio/langwell: Simplify demux loopThomas Gleixner1-6/+7
Use __ffs() to find the pending interrupt source instead of looping 32 times. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Feng Tang <[email protected]> Cc: Alek Du <[email protected]> Cc: Alan Cox <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-03-17gpio/langwell: Convert irq name spaceThomas Gleixner1-5/+5
Convert to the new irq function names. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Feng Tang <[email protected]> Cc: Alek Du <[email protected]> Cc: Alan Cox <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-03-17gpio/langwell: Fix broken irq_eoi change.Thomas Gleixner1-8/+5
commit 0766d20fd (langwell_gpio: modify EOI handling following change of kernel irq subsystem) changes - desc->chip->eoi(irq); + + if (desc->chip->irq_eoi) + desc->chip->irq_eoi(irq_get_irq_data(irq)); + else + dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq); With the following explanation: "Latest kernel has many changes in IRQ subsystem and its interfaces, like adding irq_eoi" for struct irq_chip, this patch will make it support both the new and old interface." This is completely bogus. #1) The changelog does not match the patch at all #2) This driver relies on the assumption that it sits behind an eoi capable interrupt line. If the implementation of the underlying chip changes from eoi to irq_eoi then this driver has to follow that change and not add a total bogosity. #3) Just mechanically changing eoi to irq_eoi without checking the background of that change is sloppy at best. Remove the sillyness and retrieve the interrupt data from irq_desc directly. No need to go through a sparse irq lookup. Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Feng Tang <[email protected]> Cc: Alek Du <[email protected]> Cc: Alan Cox <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-03-17gpio; Make Intel chipset gpio drivers depend on x86Thomas Gleixner1-3/+3
Nothing outside of x86 can use that code. Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-03-17Merge remote-tracking branch 'origin' into spi/nextGrant Likely4523-175189/+308363
Pull in Linus' tree to pick up changes required for the langwell gpio fixes
2011-03-17mmc: dw_mmc: support mmc power control with regulatorJaehoon Chung2-0/+27
This patch adds support for power regulators. Signed-off-by: Jaehoon Chung <[email protected]> Signed-off-by: kyungmin Park <[email protected]> Acked-by: Will Newton <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-03-17mmc: dw_mmc: fix suspend/resume operationJaehoon Chung2-2/+21
This patch is related to re-init processing on suspend/resume. When card is resuming, some register is reset. If card is removable, maybe controller should be rescan for card. But if assume card is non-removable, need to restore the old value at registers. We store the value of FIFOTH at probe time and then restore it in dw_mci_resume(). Signed-off-by: Jaehoon Chung <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Acked-by: Will Newton <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-03-17mmc: dw_mmc: add quirks for unreliable card detect, and capabilitiesJaehoon Chung2-5/+15
This patch adds quirks and capabilities to platdata. Some cards don't use the CDn pin; in that case, we assume the card's inserted. Some boards need other capabilities. So, we add capabilities in the board's platdata. Signed-off-by: Jaehoon Chung <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Acked-by: Will Newton <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-03-17mmc: tmio: fix address in kunmap_atomic() callsGuennadi Liakhovetski1-5/+5
Currently kunmap_atomic() doesn't take into account the offset, used with kmap_atomic(). On platforms, where kunmap_atomic() is not a NOP, this will lead to problems, when offset != 0. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-03-17mmc: core: reset card voltage after power offUlf Hansson1-0/+7
At power off, reset OCR mask to be the highest possible voltage supported for the current mmc host. This solves the re-initialization during the power up sequence. The voltage may have been decreased due to the card accepts a lower voltage than the voltage used during the initialization sequence. We need to reset the voltage to by the host highest possible value since according to specification the initialization must always be done at high voltage. Reviewed-by: Jonas Aberg <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-03-17mmc: core: export function mmc_do_release_host()Ulf Hansson2-1/+10
When using mmc_try_claim_host the corresponding release function is mmc_do_release_host, which then also must be exported. Reviewed-by: Jonas Aberg <[email protected]> Reviewed-by: Sebastian Rasmussen <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-03-17mmc: sdio: remember new card RCA when redetecting cardStefan Nilsson XK1-0/+8
During redetection of a SDIO card, a request for a new card RCA was submitted to the card, but was then overwritten by the old RCA. This caused the card to be deselected instead of selected when using the incorrect RCA. This bug's been present since the "oldcard" handling was introduced in 2.6.32. Signed-off-by: Stefan Nilsson XK <[email protected]> Reviewed-by: Ulf Hansson <[email protected]> Reviewed-by: Pawel Wieczorkiewicz <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Cc: <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-03-17mmc: dw_mmc: Remove set-but-unused variable.Chris Ball1-5/+1
count is only ever used by assigning to old_len if count == 0, and then old_len isn't ever used at all. So, both are redundant. Fixes: drivers/mmc/host/dw_mmc.c: In function ‘dw_mci_read_data_pio’: drivers/mmc/host/dw_mmc.c:1034:32: warning: variable ‘old_len’ set but not used [-Wunused-but-set-variable] Signed-off-by: Chris Ball <[email protected]> Acked-by: Will Newton <[email protected]>
2011-03-17mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35Wolfram Sang2-0/+81
Signed-off-by: Wolfram Sang <[email protected]> Tested-by: Marc Reilly <[email protected]> Tested-by: Eric Benard <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-03-17mmc: sdhci-esdhc: broken card detection is not a default quirkWolfram Sang3-3/+4
It can be worked around using a GPIO which will be done for i.MX later. Signed-off-by: Wolfram Sang <[email protected]> Acked-by: Anton Vorontsov <[email protected]> Tested-by: Marc Reilly <[email protected]> Tested-by: Eric Benard <[email protected]> Signed-off-by: Chris Ball <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.