aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-01-11Merge tag 'pm-5.0-rc2' of ↵Linus Torvalds9-26/+89
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These fix fallout after starting to use hrtimers in the runtime PM framework, fix a few cpufreq issues, fix a recently broken reference to cpuidle documentation, update MAINTAINERS entries for cpufreq and cpuidle and make the recently added system suspend and resume support in devfreq actually work. Specifics: - Prevent integer overflows from occurring on 32-bit when converting milliseconds to nanoseconds in the runtime PM framework and update comments that still refer to jiffies in it (Vincent Guittot, Ladislav Michl). - Fix the SCMI cpufreq driver to always use the same frequency units for arch_set_freq_scale() and make the scale-invariant load tracking acutally work with this driver (Quentin Perret). - Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers broken during the 4.20 defelopment cycle (Viresh Kumar). - Prevent the cpufreq core from attempting to return the current frequency of offline CPUs (Sudeep Holla). - Add devfreq suspend and resume hooks (missed previously) to the PM core to make the recently added system suspend and resume support in devfreq actually work (Lukasz Luba). - Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add references to new/current documentation to them (Rafael Wysocki). - Fix a recently broken reference to cpuidle documentation (Otto Sabart)" * tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM-runtime: Fix autosuspend_delay on 32bits arch PM-runtime: Fix 'jiffies' in comments after switch to hrtimers cpufreq: scmi: Fix frequency invariance in slow path doc: trace: fix reference to cpuidle documentation file cpufreq: check if policy is inactive early in __cpufreq_get() cpufreq: scpi/scmi: Fix freeing of dynamic OPPs cpuidle / Documentation: Update cpuidle MAINTAINERS entry cpufreq / Documentation: Update cpufreq MAINTAINERS entry PM: sleep: call devfreq suspend/resume
2019-01-11Merge tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds18-119/+221
Pull drm fixes from Dave Airlie: "Not a huge amount for rc2, assume the usual quiet period, and rc3 will be most of it. amdgpu: - Powerplay fixes - Virtual display pinning fixes - Golden register updates for Vega - Pitch and gem size validation fixes - SR-IOV init error fix - Pagetables in system RAM disable for some Raven system - DP-MST resume fixes tc358767 bridge: - fix to work with displayport connector" * tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits) drm/amdgpu: disable system memory page tables for now drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20 drm/bridge: tc358767: use DP connector if no panel set drm/bridge: tc358767: fix output H/V syncs drm/bridge: tc358767: reject modes which require too much BW drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value drm/bridge: tc358767: fix single lane configuration drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE drm/bridge: tc358767: add bus flags drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume() drm/amdgpu: Don't fail resume process if resuming atomic state fails drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume() drm/amdgpu: validate user GEM object size drm/amdgpu: validate user pitch alignment drm/amd/powerplay: drop the unnecessary uclk hard min setting drm/amd/powerplay: avoid possible buffer overflow drm/amd/powerplay: create pp_od_clk_voltage device file under OD support drm/amd/powerplay: update OD support flag for SKU with no OD capabilities drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG ...
2019-01-11tty: Don't hold ldisc lock in tty_reopen() if ldisc presentDmitry Safonov1-7/+13
Try to get reference for ldisc during tty_reopen(). If ldisc present, we don't need to do tty_ldisc_reinit() and lock the write side for line discipline semaphore. Effectively, it optimizes fast-path for tty_reopen(), but more importantly it won't interrupt ongoing IO on the tty as no ldisc change is needed. Fixes user-visible issue when tty_reopen() interrupted login process for user with a long password, observed and reported by Lukas. Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending") Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()") Cc: Jiri Slaby <[email protected]> Reported-by: Lukas F. Hartmann <[email protected]> Tested-by: Lukas F. Hartmann <[email protected]> Cc: stable <[email protected]> Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-11mmc: core: don't override the CD GPIO level when "cd-inverted" is setMartin Blumenstingl1-1/+1
Since commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") gpiolib-of parses the "cd-gpios" property and flips the polarity if "cd-inverted" is also set. This results in the "cd-inverted" property being evaluated twice, which effectively makes it a no-op: - first in drivers/gpio/gpiolib-of.c (of_xlate_and_get_gpiod_flags) when setting up the CD GPIO - then again in drivers/mmc/core/slot-gpio.c (mmc_gpio_get_cd) when reading the CD GPIO value at runtime On boards which are using device-tree with the "cd-inverted" property being set any inserted card are not detected anymore. This is due to the MMC core treating the CD GPIO with the wrong polarity. Disable "override_cd_active_level" for the card detection GPIO which is parsed using mmc_of_parse. This fixes SD card detection on the boards which are currently using the "cd-inverted" device-tree property (tested on Meson8b Odroid-C1 and Meson8b EC-100). This does not remove the CD GPIO inversion logic from the MMC core because there's at least one driver (sdhci-pci-core for Intel BayTrail based boards) which still passes "override_cd_active_level = true" to mmc_gpiod_request_cd(). Due to lack of hardware for testing this is left untouched. In the future the GPIO inversion logic for both, card and read-only detection can be removed once no driver is using it anymore. Fixes: 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Martin Blumenstingl <[email protected]> Tested-by: Anand Moon <[email protected]> Tested-by: Loys Ollivier <[email protected]> Acked-by: Ulf Hansson <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2019-01-11cifs: update internal module version numberSteve French1-1/+1
To 2.16 Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Fix error paths in writeback codePavel Shilovsky4-9/+56
This patch aims to address writeback code problems related to error paths. In particular it respects EINTR and related error codes and stores and returns the first error occurred during writeback. Signed-off-by: Pavel Shilovsky <[email protected]> Acked-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Move credit processing to mid callbacks for SMB3Pavel Shilovsky1-17/+34
Currently we account for credits in the thread initiating a request and waiting for a response. The demultiplex thread receives the response, wakes up the thread and the latter collects credits from the response buffer and add them to the server structure on the client. This approach is not accurate, because it may race with reconnect events in the demultiplex thread which resets the number of credits. Fix this by moving credit processing to new mid callbacks that collect credits granted by the server from the response in the demultiplex thread. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Fix credits calculation for cancelled requestsPavel Shilovsky2-2/+27
If a request is cancelled, we can't assume that the server returns 1 credit back. Instead we need to wait for a response and process the number of credits granted by the server. Create a separate mid callback for cancelled request, parse the number of credits in a response buffer and add them to the client's credits. If the didn't get a response (no response buffer available) assume 0 credits granted. The latter most probably happens together with session reconnect, so the client's credits are adjusted anyway. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11cifs: Fix potential OOB access of lock element arrayRoss Lagerwall2-6/+6
If maxBuf is small but non-zero, it could result in a zero sized lock element array which we would then try and access OOB. Signed-off-by: Ross Lagerwall <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]>
2019-01-11cifs: Limit memory used by lock request calls to a pageRoss Lagerwall2-0/+12
The code tries to allocate a contiguous buffer with a size supplied by the server (maxBuf). This could fail if memory is fragmented since it results in high order allocations for commonly used server implementations. It is also wasteful since there are probably few locks in the usual case. Limit the buffer to be no larger than a page to avoid memory allocation failures due to fragmentation. Signed-off-by: Ross Lagerwall <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11cifs: move large array from stack to heapAurelien Aptel2-14/+32
This addresses some compile warnings that you can see depending on configuration settings. Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11CIFS: Do not hide EINTR after sending network packetsPavel Shilovsky1-1/+1
Currently we hide EINTR code returned from sock_sendmsg() and return 0 instead. This makes a caller think that we successfully completed the network operation which is not true. Fix this by properly returning EINTR to callers. Cc: <[email protected]> Signed-off-by: Pavel Shilovsky <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-11ARM: integrator: impd1: use struct_size() in devm_kzalloc()Gustavo A. R. Silva1-1/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <[email protected]>
2019-01-11arm64: kexec_file: return successfully even if kaslr-seed doesn't existAKASHI Takahiro1-1/+3
In kexec_file_load, kaslr-seed property of the current dtb will be deleted any way before setting a new value if possible. It doesn't matter whether it exists in the current dtb. So "ret" should be reset to 0 here. Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support") Signed-off-by: AKASHI Takahiro <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-01-11ACPI/IORT: Fix rc_dma_get_range()Jean-Philippe Brucker1-1/+2
When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback() expects the opaque pointer argument to be a PCI bus device. At the moment rc_dma_get_range() passes the PCI endpoint instead of the bus, and we've been lucky to have pci_domain_nr(ptr) return 0 instead of crashing. Pass the bus device to iort_scan_node(). Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Reported-by: Eric Auger <[email protected]> Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Eric Auger <[email protected]> Acked-by: Robin Murphy <[email protected]> Cc: [email protected] Cc: Will Deacon <[email protected]> Cc: Hanjun Guo <[email protected]> Cc: Sudeep Holla <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-01-11Merge branch 'bpf-fix-bitfield-printing'Daniel Borkmann3-20/+34
Yonghong Song says: ==================== The previous BTF kind_flag support patch set introduced a bug for kernel bpffs pretty printing and another bug for bpftool map pretty printing. If a bitfield struct member offset is greater than 256 bits, printed value for that struct member will be incorrect. - Patch #1 fixed the bug in kernel bpffs pretty printing. - Patch #2 enhanced the test_btf test case to cover the issue exposed by patch #1. - Patch #3 fixed the bug in bpftool map pretty printing. ==================== Signed-off-by: Daniel Borkmann <[email protected]>
2019-01-11tools/bpf: fix bpftool map dump with bitfieldsYonghong Song1-6/+7
Commit 8772c8bc093b ("tools: bpftool: support pretty print with kind_flag set") added bpftool map dump with kind_flag support. When bitfield_size can be retrieved directly from btf_member, function btf_dumper_bitfield() is called to dump the bitfield. The implementation passed the wrong parameter "bit_offset" to the function. The excepted value is the bit_offset within a byte while the passed-in value is the struct member offset. This commit fixed the bug with passing correct "bit_offset" with adjusted data pointer. Fixes: 8772c8bc093b ("tools: bpftool: support pretty print with kind_flag set") Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-01-11tools/bpf: test btf bitfield with >=256 struct member offsetYonghong Song1-8/+21
This patch modified test_btf pretty print test to cover the bitfield with struct member equal to or greater 256. Without the previous kernel patch fix, the modified test will fail: $ test_btf -p ...... BTF pretty print array(#1)......unexpected pprint output expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1} read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0} BTF pretty print array(#2)......unexpected pprint output expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1} read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0} PASS:6 SKIP:0 FAIL:2 With the kernel fix, the modified test will succeed: $ test_btf -p ...... BTF pretty print array(#1)......OK BTF pretty print array(#2)......OK PASS:8 SKIP:0 FAIL:0 Fixes: 9d5f9f701b18 ("bpf: btf: fix struct/union/fwd types with kind_flag") Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-01-11bpf: fix bpffs bitfield pretty printYonghong Song1-6/+6
Commit 9d5f9f701b18 ("bpf: btf: fix struct/union/fwd types with kind_flag") introduced kind_flag and used bitfield_size in the btf_member to directly pretty print member values. The commit contained a bug where the incorrect parameters could be passed to function btf_bitfield_seq_show(). The bits_offset parameter in the function expects a value less than 8. Instead, the member offset in the structure is passed. The below is btf_bitfield_seq_show() func signature: void btf_bitfield_seq_show(void *data, u8 bits_offset, u8 nr_bits, struct seq_file *m) both bits_offset and nr_bits are u8 type. If the bitfield member offset is greater than 256, incorrect value will be printed. This patch fixed the issue by calculating correct proper data offset and bits_offset similar to non kind_flag case. Fixes: 9d5f9f701b18 ("bpf: btf: fix struct/union/fwd types with kind_flag") Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-01-11Revert "staging: rtl8723bs: Mark ACPI table declaration as used"Greg Kroah-Hartman1-1/+1
This reverts commit e6d093719e22a09e778edde192dfd89a0cd77b5c. Turns out it is not needed at all, a fix for clang was made and accepted upstream in that project that makes this change unnecessary. So revert it. Reported-by: Nick Desaulniers <[email protected]> Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-11Merge tag 'drm-intel-fixes-2019-01-11' of ↵Daniel Vetter10-39/+98
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes i915 fixes for v5.0-rc2: - Disable PSR for Apple panels - Broxton ERR_PTR error state fix - Kabylake VECS workaround fix - Unwind failure on pinning the gen7 ppgtt - GVT workload request allocation fix Signed-off-by: Daniel Vetter <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-11Merge tag 'drm-misc-fixes-2019-01-10-1' of ↵Daniel Vetter3-58/+82
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Second pull request, drm-misc-fixes for v5.0-rc2: - Fix fb-helper to work correctly with SDL 1.2 bugs. - Fix lockdep warning in the atomic ioctl and setproperty. Signed-off-by: Daniel Vetter <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-11Merge branches 'acpi-pci', 'acpi-power' and 'acpi-misc'Rafael J. Wysocki3-3/+26
* acpi-pci: ACPI: Fix build failure when CONFIG_NLS is set to 'n' * acpi-power: ACPI: power: Skip duplicate power resource references in _PRx * acpi-misc: ACPI: NUMA: Use correct type for printing addresses on i386-PAE
2019-01-11Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki8-22/+82
* pm-cpuidle: doc: trace: fix reference to cpuidle documentation file cpuidle / Documentation: Update cpuidle MAINTAINERS entry * pm-cpufreq: cpufreq: scmi: Fix frequency invariance in slow path cpufreq: check if policy is inactive early in __cpufreq_get() cpufreq: scpi/scmi: Fix freeing of dynamic OPPs cpufreq / Documentation: Update cpufreq MAINTAINERS entry * pm-sleep: PM: sleep: call devfreq suspend/resume
2019-01-11gpio: pca953x: Make symbol 'pca953x_i2c_regmap' staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/gpio/gpio-pca953x.c:292:28: warning: symbol 'pca953x_i2c_regmap' was not declared. Should it be static? Fixes: 49427232764d ("gpio: pca953x: Perform basic regmap conversion") Signed-off-by: Wei Yongjun <[email protected]> Reviewed-by: Marek Vasut <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2019-01-11Merge branch 'linux-4.21' of git://github.com/skeggsb/linux into drm-fixesDave Airlie3-5/+12
3 nouveau fixes: one backlight, falcon register access, and a fan fix. Signed-off-by: Dave Airlie <[email protected]> From: Ben Skeggs <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4MHr=Rq3FkZFTYWPc7o5-dTWFysXB=wN2L91SYeFbzkQ@mail.gmail.com
2019-01-11Merge tag 'perf-core-for-mingo-5.0-20190110' of ↵Ingo Molnar7-419/+470
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo: perf trace: Ravi Bangoria: - Rework PowerPC syscall table generation, now using a .tbl file just like x86_64 and S/390, also silencing a tools build warning about headers out of sync with the kernel sources. tools include uapi: Arnaldo Carvalho de Melo: - Sync linux/if_link.h copy with the kernel sources, silencing a build warning. perf top: Arnaldo Carvalho de Melo: - Add 'arch_cpu_idle' to the list of kernel idle symbols, noticed on a Orange Pi Zero ARM board, just like with other symbols in other arches. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-01-11drm/nouveau/falcon: avoid touching registers if engine is offIlia Mirkin1-2/+5
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980 Signed-off-by: Ilia Mirkin <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2019-01-11drm/nouveau: Don't disable polling in fallback modeTakashi Iwai1-3/+4
When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace. Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447 Reported-by: Thomas Blume <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Reviewed-by: Martin Peres <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2019-01-11drm/nouveau: register backlight on pascal and newerBen Skeggs1-0/+3
Signed-off-by: Ben Skeggs <[email protected]>
2019-01-11netfilter: nft_flow_offload: fix interaction with vrf slave devicewenxu3-5/+5
In the forward chain, the iif is changed from slave device to master vrf device. Thus, flow offload does not find a match on the lower slave device. This patch uses the cached route, ie. dst->dev, to update the iif and oif fields in the flow entry. After this patch, the following example works fine: # ip addr add dev eth0 1.1.1.1/24 # ip addr add dev eth1 10.0.0.1/24 # ip link add user1 type vrf table 1 # ip l set user1 up # ip l set dev eth0 master user1 # ip l set dev eth1 master user1 # nft add table firewall # nft add flowtable f fb1 { hook ingress priority 0 \; devices = { eth0, eth1 } \; } # nft add chain f ftb-all {type filter hook forward priority 0 \; policy accept \; } # nft add rule f ftb-all ct zone 1 ip protocol tcp flow offload @fb1 # nft add rule f ftb-all ct zone 1 ip protocol udp flow offload @fb1 Signed-off-by: wenxu <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-01-11netfilter: ebtables: account ebt_table_info to kmemcgShakeel Butt1-2/+4
The [ip,ip6,arp]_tables use x_tables_info internally and the underlying memory is already accounted to kmemcg. Do the same for ebtables. The syzbot, by using setsockopt(EBT_SO_SET_ENTRIES), was able to OOM the whole system from a restricted memcg, a potential DoS. By accounting the ebt_table_info, the memory used for ebt_table_info can be contained within the memcg of the allocating process. However the lifetime of ebt_table_info is independent of the allocating process and is tied to the network namespace. So, the oom-killer will not be able to relieve the memory pressure due to ebt_table_info memory. The memory for ebt_table_info is allocated through vmalloc. Currently vmalloc does not handle the oom-killed allocating process correctly and one large allocation can bypass memcg limit enforcement. So, with this patch, at least the small allocations will be contained. For large allocations, we need to fix vmalloc. Reported-by: [email protected] Signed-off-by: Shakeel Butt <[email protected]> Reviewed-by: Kirill Tkhai <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-01-11i2c: tegra: Fix Maximum transfer sizeSowjanya Komatineni1-1/+14
Tegra194 supports maximum 64K Bytes transfer per packet. Tegra186 and prior supports maximum 4K Bytes transfer per packet. This patch fixes this payload difference between Tegra194 and prior Tegra chipsets using separate i2c_adapter_quirks. Signed-off-by: Sowjanya Komatineni <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2019-01-11i2c: dev: prevent adapter retries and timeout being set as minus valueYi Zeng1-0/+6
If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by: Yi Zeng <[email protected]> [wsa: minor grammar updates to commit message] Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2019-01-10qcom-scm: Include <linux/err.h> headerFabio Estevam1-0/+1
Since commit e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") the DRM_MSM symbol can be selected by SOC_IMX5 causing the following error when building imx_v6_v7_defconfig: In file included from ../drivers/gpu/drm/msm/adreno/a5xx_gpu.c:17:0: ../include/linux/qcom_scm.h: In function 'qcom_scm_set_cold_boot_addr': ../include/linux/qcom_scm.h:73:10: error: 'ENODEV' undeclared (first use in this function) return -ENODEV; Include the <linux/err.h> header file to fix this problem. Reported-by: kernelci.org bot <[email protected]> Fixes: e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Andy Gross <[email protected]>
2019-01-10Merge branch 'nvme-5.0' of git://git.infradead.org/nvme into for-linusJens Axboe6-39/+72
Pull NVMe fixes from Christoph. * 'nvme-5.0' of git://git.infradead.org/nvme: nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps
2019-01-10Merge tag 'pci-v5.0-fixes-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Fix Amlogic Meson host controller driver build failure (Corentin Labbe)" * tag 'pci-v5.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: amlogic: Fix build failure due to missing gpio header
2019-01-10net: ethernet: mediatek: fix warning in phy_start_anegHeiner Kallweit1-16/+0
linux 5.0-rc1 shows following warning on bpi-r2/mt7623 bootup: [ 5.170597] WARNING: CPU: 3 PID: 1 at drivers/net/phy/phy.c:548 phy_start_aneg+0x110/0x144 [ 5.178826] called from state READY .... [ 5.264111] [<c0629fd4>] (phy_start_aneg) from [<c0e3e720>] (mtk_init+0x414/0x47c) [ 5.271630] r7:df5f5eec r6:c0f08c48 r5:00000000 r4:dea67800 [ 5.277256] [<c0e3e30c>] (mtk_init) from [<c07dabbc>] (register_netdevice+0x98/0x51c) [ 5.285035] r8:00000000 r7:00000000 r6:c0f97080 r5:c0f08c48 r4:dea67800 [ 5.291693] [<c07dab24>] (register_netdevice) from [<c07db06c>] (register_netdev+0x2c/0x44) [ 5.299989] r8:00000000 r7:dea2e608 r6:deacea00 r5:dea2e604 r4:dea67800 [ 5.306646] [<c07db040>] (register_netdev) from [<c06326d8>] (mtk_probe+0x668/0x7ac) [ 5.314336] r5:dea2e604 r4:dea2e040 [ 5.317890] [<c0632070>] (mtk_probe) from [<c05a78fc>] (platform_drv_probe+0x58/0xa8) [ 5.325670] r10:c0f86bac r9:00000000 r8:c0fbe578 r7:00000000 r6:c0f86bac r5:00000000 [ 5.333445] r4:deacea10 [ 5.335963] [<c05a78a4>] (platform_drv_probe) from [<c05a5248>] (really_probe+0x2d8/0x424) maybe other boards using this generic driver are affected v2: optimization: - phy_set_max_speed() is only needed if you want to reduce the max speed, typically if the PHY supports 1Gbps but the MAC supports 100Mbps only. - The pause parameters are autonegotiated. Except you have a specific need you normally don't need to manually fiddle with this. - phy_start_aneg() is called implicitly by the phylib state machine, you shouldn't call it manually except you have a good excuse. - netif_carrier_on/netif_carrier_off in mtk_phy_link_adjust() isn't needed. It's done by phy_link_change() in phylib. Signed-off-by: Frank Wunderlich <[email protected]> Reviewed-by: Heiner Kallweit <[email protected]> Acked-by: Sean Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-10tcp: change txhash on SYN-data timeoutYuchung Cheng1-1/+1
Previously upon SYN timeouts the sender recomputes the txhash to try a different path. However this does not apply on the initial timeout of SYN-data (active Fast Open). Therefore an active IPv6 Fast Open connection may incur one second RTO penalty to take on a new path after the second SYN retransmission uses a new flow label. This patch removes this undesirable behavior so Fast Open changes the flow label just like the regular connections. This also helps avoid falsely disabling Fast Open on the sender which triggers after two consecutive SYN timeouts on Fast Open. Signed-off-by: Yuchung Cheng <[email protected]> Reviewed-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-10net: dsa: mv88x6xxx: mv88e6390 errataAndrew Lunn3-0/+128
The 6390 copper ports have an errata which require poking magic values into undocumented magic registers and then performing a software reset. Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-10bonding: update nest level on unlinkWillem de Bruijn1-0/+3
A network device stack with multiple layers of bonding devices can trigger a false positive lockdep warning. Adding lockdep nest levels fixes this. Update the level on both enslave and unlink, to avoid the following series of events .. ip netns add test ip netns exec test bash ip link set dev lo addr 00:11:22:33:44:55 ip link set dev lo down ip link add dev bond1 type bond ip link add dev bond2 type bond ip link set dev lo master bond1 ip link set dev bond1 master bond2 ip link set dev bond1 nomaster ip link set dev bond2 master bond1 .. from still generating a splat: [ 193.652127] ====================================================== [ 193.658231] WARNING: possible circular locking dependency detected [ 193.664350] 4.20.0 #8 Not tainted [ 193.668310] ------------------------------------------------------ [ 193.674417] ip/15577 is trying to acquire lock: [ 193.678897] 00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290 [ 193.687851] but task is already holding lock: [ 193.693625] 00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290 [..] [ 193.851092] lock_acquire+0xa7/0x190 [ 193.855138] _raw_spin_lock_nested+0x2d/0x40 [ 193.859878] bond_get_stats+0x58/0x290 [ 193.864093] dev_get_stats+0x5a/0xc0 [ 193.868140] bond_get_stats+0x105/0x290 [ 193.872444] dev_get_stats+0x5a/0xc0 [ 193.876493] rtnl_fill_stats+0x40/0x130 [ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0 [ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0 [ 193.890091] rtnetlink_event+0x5b/0xa0 [ 193.894320] raw_notifier_call_chain+0x43/0x60 [ 193.899225] netdev_change_features+0x50/0xa0 [ 193.904044] bond_compute_features.isra.46+0x1ab/0x270 [ 193.909640] bond_enslave+0x141d/0x15b0 [ 193.913946] do_set_master+0x89/0xa0 [ 193.918016] do_setlink+0x37c/0xda0 [ 193.921980] __rtnl_newlink+0x499/0x890 [ 193.926281] rtnl_newlink+0x48/0x70 [ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0 [ 193.934801] netlink_rcv_skb+0xd1/0x110 [ 193.939103] rtnetlink_rcv+0x15/0x20 [ 193.943151] netlink_unicast+0x3b5/0x520 [ 193.947544] netlink_sendmsg+0x2fd/0x3f0 [ 193.951942] sock_sendmsg+0x38/0x50 [ 193.955899] ___sys_sendmsg+0x2ba/0x2d0 [ 193.960205] __x64_sys_sendmsg+0xad/0x100 [ 193.964687] do_syscall_64+0x5a/0x460 [ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 7e2556e40026 ("bonding: avoid lockdep confusion in bond_get_stats()") Reported-by: syzbot <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-11Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie15-96/+156
into drm-fixes - Powerplay fixes - Virtual display pinning fixes - Golden register updates for vega - Pitch and gem size validation fixes - Fix for error case in sr-iov init - Disable page tables in system memory on RV due to issues with IOMMU reported on some platforms Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-10Merge tag 'riscv-for-linus-4.21-rc2-v2' of ↵Linus Torvalds19-42/+189
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This tag contains a handful of updates that slipped through the cracks during the merge window due to the holidays. The fixes are mostly independent, with the exception of one larger audit-related branch. Core RISC-V updates: - The BSS has been moved, which shrinks flat images. - A fix to test-bpf so it compiles on RV64I-based systems. - A fix to respect the kernel commandline when there is no device tree. - A fix to prevent CPUs from trying to put themselves to sleep when bringing down the system. - Support for MODULE_SECTIONS on RV32I-based systems. - [new in v2] The addition of an SBI earlycon driver. This is definately a new feature, but I'd like to include it now because I dropped this patch when submitting the merge window PR that removed our EARLY_PRINTK support. RISC-V audit updates: - The addition of NR_syscalls into unistd.h, which is necessary for CONFIG_FTRACE_SYSCALLS. - The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit} get defined. - A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS As usual, I've tested this by booting a Fedora-based image on a recent QEMU (this time just whatever I had lying around). * tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: tty/serial: Add RISC-V SBI earlycon support riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig riscv: fix trace_sys_exit hook riscv: define CREATE_TRACE_POINTS in ptrace.c riscv: define NR_syscalls in unistd.h riscv: audit: add audit hook in do_syscall_trace_enter/exit() riscv: add audit support RISC-V: Support MODULE_SECTIONS mechanism on RV32 MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree riscv: don't stop itself in smp_send_stop arch: riscv: support kernel command line forcing when no DTB passed tools uapi: fix RISC-V 64-bit support RISC-V: Make BSS section as the last section in vmlinux.lds.S
2019-01-11Merge tag 'drm-misc-fixes-2019-01-10' of ↵Dave Airlie3-23/+65
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Pull request for drm-misc-fixes for v5.0-rc2: - Fixes for the tc358767 bridge to work correctly with tc358867 using a DP connector. - Make resume work on amdgpu when a DP-MST display is unplugged. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-10CIFS: Fix credit computation for compounded requestsPavel Shilovsky1-18/+41
In SMB3 protocol every part of the compound chain consumes credits individually, so we need to call wait_for_free_credits() for each of the PDUs in the chain. If an operation is interrupted, we must ensure we return all credits taken from the server structure back. Without this patch server can sometimes disconnect the session due to credit mismatches, especially when first operation(s) are large writes. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]>
2019-01-10CIFS: Do not set credits to 1 if the server didn't grant anythingPavel Shilovsky1-2/+0
Currently we reset the number of total credits granted by the server to 1 if the server didn't grant us anything int the response. This violates the SMB3 protocol - we need to trust the server and use the credit values from the response. Fix this by removing the corresponding code. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]>
2019-01-10CIFS: Fix adjustment of credits for MTU requestsPavel Shilovsky1-2/+6
Currently for MTU requests we allocate maximum possible credits in advance and then adjust them according to the request size. While we were adjusting the number of credits belonging to the server, we were skipping adjustment of credits belonging to the request. This patch fixes it by setting request credits to CreditCharge field value of SMB2 packet header. Also ask 1 credit more for async read and write operations to increase parallelism and match the behavior of other operations. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]>
2019-01-10cifs: Fix a tiny potential memory leakDan Carpenter1-0/+1
The most recent "it" allocation is leaked on this error path. I believe that small allocations always succeed in current kernels so this doesn't really affect run time. Fixes: 54be1f6c1c37 ("cifs: Add DFS cache routines") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-01-10cifs: Fix a debug messageDan Carpenter1-3/+4
This debug message was never shown because it was checking for NULL returns but extract_hostname() returns error pointers. Fixes: 93d5cb517db3 ("cifs: Add support for failover in cifs_reconnect()") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Paulo Alcantara <[email protected]>
2019-01-10arm64: kpti: Avoid rewriting early page tables when KASLR is enabledWill Deacon5-5/+52
A side effect of commit c55191e96caa ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") is that the linear map is created with page granularity, which means that transitioning the early page table from global to non-global mappings when enabling kpti can take a significant amount of time during boot. Given that most CPU implementations do not require kpti, this mainly impacts KASLR builds where kpti is forcefully enabled. However, in these situations we know early on that non-global mappings are required and can avoid the use of global mappings from the beginning. The only gotcha is Cavium erratum #27456, which we must detect based on the MIDR value of the boot CPU. Reviewed-by: Ard Biesheuvel <[email protected]> Reported-by: John Garry <[email protected]> Signed-off-by: Will Deacon <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.