aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-06-28block: Fix cloning of requests with a special payloadBart Van Assche1-0/+4
This patch avoids that removing a path controlled by the dm-mpath driver while mkfs is running triggers the following kernel bug: kernel BUG at block/blk-core.c:3347! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 20 PID: 24369 Comm: mkfs.ext4 Not tainted 4.18.0-rc1-dbg+ #2 RIP: 0010:blk_end_request_all+0x68/0x70 Call Trace: <IRQ> dm_softirq_done+0x326/0x3d0 [dm_mod] blk_done_softirq+0x19b/0x1e0 __do_softirq+0x128/0x60d irq_exit+0x100/0x110 smp_call_function_single_interrupt+0x90/0x330 call_function_single_interrupt+0xf/0x20 </IRQ> Fixes: f9d03f96b988 ("block: improve handling of the magic discard payload") Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Acked-by: Mike Snitzer <[email protected]> Signed-off-by: Bart Van Assche <[email protected]> Cc: Hannes Reinecke <[email protected]> Cc: Johannes Thumshirn <[email protected]> Cc: <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-06-28parisc: Wire up io_pgetevents syscallHelge Deller2-1/+3
Signed-off-by: Helge Deller <[email protected]>
2018-06-28parisc: Default to 4 SMP CPUsHelge Deller1-1/+1
I haven't seen any real SMP machine yet with > 4 CPUs (we don't suport SuperDomes yet), so reducing the default maximum number of CPUs may speed up various bitop functions which depend on number of CPUs in the system. bload-o-meter on a typical 64-bit kernel shows: Data: add/remove: 0/0 grow/shrink: 0/10 up/down: 0/-3724 (-3724) Total: Before=1910404, After=1906680, chg -0.19% Code: add/remove: 0/2 grow/shrink: 42/38 up/down: 2320/-3500 (-1180) Total: Before=11053099, After=11051919, chg -0.01% Signed-off-by: Helge Deller <[email protected]>
2018-06-28parisc: Convert printk(KERN_LEVEL) to pr_lvl()Andy Shevchenko1-16/+9
Convert printk(KERN_LEVEL) type of calls to pr_lvl() macros. While here, - convert printk() to pr_info() - join back string literal to be on one line - use %*phN (note, it gives 1 byte more for sake of simplicity) Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2018-06-28parisc: Mark 16kB and 64kB page sizes BROKENHelge Deller1-2/+2
A full boot only succeeds with 4kB page sizes currently. For 16kB and 64kB page size support somone needs to fix the LBA PCI code at least, so mark those broken for now. Signed-off-by: Helge Deller <[email protected]>
2018-06-28parisc: Drop struct sigaction from not exported header fileHelge Deller1-8/+0
This header file isn't exported to userspace, so there is no benefit in defining struct sigaction for userspace here. Signed-off-by: Helge Deller <[email protected]>
2018-06-28nvme-rdma: fix possible double free of controller async event bufferSagi Grimberg1-2/+5
If reconnect/reset failed where the controller async event buffer was freed, we might end up freeing it again as we call nvme_rdma_destroy_admin_queue again in the remove path. Given that the sequence is guaranteed to serialize by .ctrl_stop, we simply set ctrl->async_event_sqe.data to NULL and don't free it in future visits. Reported-by: Max Gurtovoy <[email protected]> Tested-by: Max Gurtovoy <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-06-28kconfig: loop boundary condition fixJerry James1-1/+1
If buf[-1] just happens to hold the byte 0x0A, then nread can wrap around to (size_t)-1, leading to invalid memory accesses. This has caused segmentation faults when trying to build the latest kernel snapshots for i686 in Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=1592374 Signed-off-by: Jerry James <[email protected]> [[email protected]: reformatted patch for submission] Signed-off-by: Alexander Ploumistos <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-28kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATIONMasahiro Yamada1-4/+3
Since commit 5d20ee3192a5 ("kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled"), HAVE_LD_DEAD_CODE_DATA_ELIMINATION is supposed to be selected by architectures that are capable of this functionality. LD_DEAD_CODE_DATA_ELIMINATION is now users' selection. Update the help message. Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-28kconfig: handle P_SYMBOL in print_symbol()Dirk Gouders2-0/+7
Each symbol has a property of type P_SYMBOL since commit 59e89e3ddf85 (kconfig: save location of config symbols). Handle those properties in print_symbol(). Further, place a pointer to print_symbol() in the comment above the list of known property type. Signed-off-by: Dirk Gouders <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-28net: stmmac: Set DMA buffer size in HWJose Abreu4-0/+19
This is clearly a bug. We need to set the DMA buffer size in the HW otherwise corruption can occur when receiving packets. This is probably not occuring because of small MTU values and because HW has a default value internally (which currently is bigger than default buffer size). Signed-off-by: Jose Abreu <[email protected]> Cc: David S. Miller <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Vitor Soares <[email protected]> Cc: Giuseppe Cavallaro <[email protected]> Cc: Alexandre Torgue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28net/smc: rebuild nonblocking connectUrsula Braun2-28/+71
The recent poll change may lead to stalls for non-blocking connecting SMC sockets, since sock_poll_wait is no longer performed on the internal CLC socket, but on the outer SMC socket. kernel_connect() on the internal CLC socket returns with -EINPROGRESS, but the wake up logic does not work in all cases. If the internal CLC socket is still in state TCP_SYN_SENT when polled, sock_poll_wait() from sock_poll() does not sleep. It is supposed to sleep till the state of the internal CLC socket switches to TCP_ESTABLISHED. This problem triggered a redesign of the SMC nonblocking connect logic. This patch introduces a connect worker covering all connect steps followed by a wake up of socket waiters. It allows to get rid of all delays and locks in smc_poll(). Fixes: c0129a061442 ("smc: convert to ->poll_mask") Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28tcp: add one more quick ack after after ECN eventsEric Dumazet1-2/+2
Larry Brakmo proposal ( https://patchwork.ozlabs.org/patch/935233/ tcp: force cwnd at least 2 in tcp_cwnd_reduction) made us rethink about our recent patch removing ~16 quick acks after ECN events. tcp_enter_quickack_mode(sk, 1) makes sure one immediate ack is sent, but in the case the sender cwnd was lowered to 1, we do not want to have a delayed ack for the next packet we will receive. Fixes: 522040ea5fdd ("tcp: do not aggressively quick ack after ECN events") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Neal Cardwell <[email protected]> Cc: Lawrence Brakmo <[email protected]> Acked-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28bpfilter: include bpfilter_umh in assembly instead of using objcopyMasahiro Yamada3-21/+14
What we want here is to embed a user-space program into the kernel. Instead of the complex ELF magic, let's simply wrap it in the assembly with the '.incbin' directive. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28strparser: Remove early eaten to fix full tcp receive buffer stallDoron Roberts-Kedes1-16/+1
On receving an incomplete message, the existing code stores the remaining length of the cloned skb in the early_eaten field instead of incrementing the value returned by __strp_recv. This defers invocation of sock_rfree for the current skb until the next invocation of __strp_recv, which returns early_eaten if early_eaten is non-zero. This behavior causes a stall when the current message occupies the very tail end of a massive skb, and strp_peek/need_bytes indicates that the remainder of the current message has yet to arrive on the socket. The TCP receive buffer is totally full, causing the TCP window to go to zero, so the remainder of the message will never arrive. Incrementing the value returned by __strp_recv by the amount otherwise stored in early_eaten prevents stalls of this nature. Signed-off-by: Doron Roberts-Kedes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28vt: prevent leaking uninitialized data to userspace via /dev/vcs*Alexander Potapenko1-2/+2
KMSAN reported an infoleak when reading from /dev/vcs*: BUG: KMSAN: kernel-infoleak in vcs_read+0x18ba/0x1cc0 Call Trace: ... kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253 copy_to_user ./include/linux/uaccess.h:184 vcs_read+0x18ba/0x1cc0 drivers/tty/vt/vc_screen.c:352 __vfs_read+0x1b2/0x9d0 fs/read_write.c:416 vfs_read+0x36c/0x6b0 fs/read_write.c:452 ... Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315 __kmalloc+0x13a/0x350 mm/slub.c:3818 kmalloc ./include/linux/slab.h:517 vc_allocate+0x438/0x800 drivers/tty/vt/vt.c:787 con_install+0x8c/0x640 drivers/tty/vt/vt.c:2880 tty_driver_install_tty drivers/tty/tty_io.c:1224 tty_init_dev+0x1b5/0x1020 drivers/tty/tty_io.c:1324 tty_open_by_driver drivers/tty/tty_io.c:1959 tty_open+0x17b4/0x2ed0 drivers/tty/tty_io.c:2007 chrdev_open+0xc25/0xd90 fs/char_dev.c:417 do_dentry_open+0xccc/0x1440 fs/open.c:794 vfs_open+0x1b6/0x2f0 fs/open.c:908 ... Bytes 0-79 of 240 are uninitialized Consistently allocating |vc_screenbuf| with kzalloc() fixes the problem Reported-by: [email protected] Signed-off-by: Alexander Potapenko <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-28serdev: fix memleak on module unloadJohan Hovold1-0/+1
Make sure to free all resources associated with the ida on module exit. Fixes: cd6484e1830b ("serdev: Introduce new bus for serial attached devices") Cc: stable <[email protected]> # 4.11 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-28serial: 8250_pci: Remove stalled entries in blacklistAndy Shevchenko1-2/+0
After the commit 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") pure serial multi-port cards, such as CH355, got blacklisted and thus not being enumerated anymore. Previously, it seems, blacklisting them was on purpose to shut up pciserial_init_one() about record duplication. So, remove the entries from blacklist in order to get cards enumerated. Fixes: 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") Reported-by: Matt Turner <[email protected]> Cc: Sergej Pupykin <[email protected]> Cc: Alexandr Petrenko <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-and-Tested-by: Matt Turner <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-28n_tty: Access echo_* variables carefully.Tetsuo Handa1-18/+24
syzbot is reporting stalls at __process_echoes() [1]. This is because since ldata->echo_commit < ldata->echo_tail becomes true for some reason, the discard loop is serving as almost infinite loop. This patch tries to avoid falling into ldata->echo_commit < ldata->echo_tail situation by making access to echo_* variables more carefully. Since reset_buffer_flags() is called without output_lock held, it should not touch echo_* variables. And omit a call to reset_buffer_flags() from n_tty_open() by using vzalloc(). Since add_echo_byte() is called without output_lock held, it needs memory barrier between storing into echo_buf[] and incrementing echo_head counter. echo_buf() needs corresponding memory barrier before reading echo_buf[]. Lack of handling the possibility of not-yet-stored multi-byte operation might be the reason of falling into ldata->echo_commit < ldata->echo_tail situation, for if I do WARN_ON(ldata->echo_commit == tail + 1) prior to echo_buf(ldata, tail + 1), the WARN_ON() fires. Also, explicitly masking with buffer for the former "while" loop, and use ldata->echo_commit > tail for the latter "while" loop. [1] https://syzkaller.appspot.com/bug?id=17f23b094cd80df750e5b0f8982c521ee6bcbf40 Signed-off-by: Tetsuo Handa <[email protected]> Reported-by: syzbot <[email protected]> Cc: Peter Hurley <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-28n_tty: Fix stall at n_tty_receive_char_special().Tetsuo Handa1-5/+8
syzbot is reporting stalls at n_tty_receive_char_special() [1]. This is because comparison is not working as expected since ldata->read_head can change at any moment. Mitigate this by explicitly masking with buffer size when checking condition for "while" loops. [1] https://syzkaller.appspot.com/bug?id=3d7481a346958d9469bebbeb0537d5f056bdd6e8 Signed-off-by: Tetsuo Handa <[email protected]> Reported-by: syzbot <[email protected]> Fixes: bc5a5e3f45d04784 ("n_tty: Don't wrap input buffer indices at buffer size") Cc: stable <[email protected]> Cc: Peter Hurley <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-28swiotlb: export swiotlb_dma_opsChristoph Hellwig1-0/+1
For architectures that do not use per-device dma ops we need to export the dma_map_ops structure returned from get_arch_dma_ops(). Fixes: 10314e09 ("riscv: add swiotlb support") Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Andreas Schwab <[email protected]>
2018-06-28Merge tag 'usb-serial-4.18-rc3' of ↵Greg Kroah-Hartman1-0/+14
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.18-rc3 Here are bunch of new device ids for cp210x. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <[email protected]>
2018-06-28Btrfs: fix mount failure when qgroup rescan is in progressFilipe Manana1-3/+10
If a power failure happens while the qgroup rescan kthread is running, the next mount operation will always fail. This is because of a recent regression that makes qgroup_rescan_init() incorrectly return -EINVAL when we are mounting the filesystem (through btrfs_read_qgroup_config()). This causes the -EINVAL error to be returned regardless of any qgroup flags being set instead of returning the error only when neither of the flags BTRFS_QGROUP_STATUS_FLAG_RESCAN nor BTRFS_QGROUP_STATUS_FLAG_ON are set. A test case for fstests follows up soon. Fixes: 9593bf49675e ("btrfs: qgroup: show more meaningful qgroup_rescan_init error message") Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2018-06-28Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversionChris Mason1-1/+2
The vm_fault_t conversion commit introduced a ret2 variable for tracking the integer return values from internal btrfs functions. It was sometimes returning VM_FAULT_LOCKED for pages that were actually invalid and had been removed from the radix. Something like this: ret2 = btrfs_delalloc_reserve_space() // returns zero on success lock_page(page) if (page->mapping != inode->i_mapping) goto out_unlock; ... out_unlock: if (!ret2) { ... return VM_FAULT_LOCKED; } This ends up triggering this WARNING in btrfs_destroy_inode() WARN_ON(BTRFS_I(inode)->block_rsv.size); xfstests generic/095 was able to reliably reproduce the errors. Since out_unlock: is only used for errors, this fix moves it below the if (!ret2) check we use to return VM_FAULT_LOCKED for success. Fixes: a528a2415087 (btrfs: change return type of btrfs_page_mkwrite to vm_fault_t) Signed-off-by: Chris Mason <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2018-06-28btrfs: quota: Set rescan progress to (u64)-1 if we hit last leafQu Wenruo1-1/+3
Commit ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree") added a new exit for rescan finish. However after finishing quota rescan, we set fs_info->qgroup_rescan_progress to (u64)-1 before we exit through the original exit path. While we missed that assignment of (u64)-1 in the new exit path. The end result is, the quota status item doesn't have the same value. (-1 vs the last bytenr + 1) Although it doesn't affect quota accounting, it's still better to keep the original behavior. Reported-by: Misono Tomohiro <[email protected]> Fixes: ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree") Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: Misono Tomohiro <[email protected]> Signed-off-by: David Sterba <[email protected]>
2018-06-28Merge tag 'mlx5-fixes-2018-06-26' of ↵David S. Miller14-35/+45
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2018-06-26 Fixes for mlx5 core and netdev driver: Two fixes from Alex Vesker to address command interface issues - Race in command interface polling mode - Incorrect raw command length parsing From Shay Agroskin, Fix wrong size allocation for QoS ETC TC regitster. From Or Gerlitz and Eli Cohin, Address backward compatability issues for when Eswitch capability is not advertised for the PF host driver - Fix required capability for manipulating MPFS - E-Switch, Disallow vlan/spoofcheck setup if not being esw manager - Avoid dealing with vport IB/eth representors if not being e-switch manager - E-Switch, Avoid setup attempt if not being e-switch manager - Don't attempt to dereference the ppriv struct if not being eswitch manager ==================== Signed-off-by: David S. Miller <[email protected]>
2018-06-28selftests/net: Fix permissions for fib_tests.shShuah Khan1-0/+0
fib_tests.sh became non-executable at some point. This is what happens: selftests: net: fib_tests.sh: Warning: file fib_tests.sh is not executable, correct this. not ok 1..11 selftests: net: fib_tests.sh [FAIL] Fixes: d69faad76584 ("selftests: fib_tests: Add prefix route tests with metric") Signed-off-by: Daniel Díaz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()Dan Carpenter1-1/+1
The d->chans[] array has d->dma_requests elements so the > should be >= here. Fixes: 8e6152bc660e ("dmaengine: Add hisilicon k3 DMA engine driver") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2018-06-28dmaengine: pl330: report BURST residue granularityMarek Szyprowski1-1/+1
The reported residue is already calculated in BURST unit granularity, so advertise this capability properly to other devices in the system. Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function") Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2018-06-28Merge branch 'xdp-flush'David S. Miller3-30/+48
Jesper Dangaard Brouer says: ==================== xdp: don't mix XDP_TX and XDP_REDIRECT flush ops Fix driver logic that are combining XDP_TX flush and XDP_REDIRECT map flushing. These are two different XDP xmit modes, and it is clearly wrong to invoke both types of flush operations when only one of the XDP xmit modes is used. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-06-28virtio_net: split XDP_TX kick and XDP_REDIRECT map flushingJesper Dangaard Brouer1-11/+19
The driver was combining XDP_TX virtqueue_kick and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. The suboptimal behavior was introduced in commit 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets"). Fixes: 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets") Signed-off-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28i40e: split XDP_TX tail and XDP_REDIRECT map flushingJesper Dangaard Brouer1-9/+15
The driver was combining the XDP_TX tail flush and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. It looks like the mistake was copy-pasted from ixgbe. Fixes: d9314c474d4f ("i40e: add support for XDP_REDIRECT") Signed-off-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Björn Töpel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28ixgbe: split XDP_TX tail and XDP_REDIRECT map flushingJesper Dangaard Brouer1-10/+14
The driver was combining the XDP_TX tail flush and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. Fixes: 11393cc9b9be ("xdp: Add batching support to redirect map") Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28net: macb: initialize bp->queues[0].bp for at91rm9200Alexandre Belloni1-0/+2
The macb driver currently crashes on at91rm9200 with the following trace: Unable to handle kernel NULL pointer dereference at virtual address 00000014 [...] [<c031da44>] (macb_rx_desc) from [<c031f2bc>] (at91ether_open+0x2e8/0x3f8) [<c031f2bc>] (at91ether_open) from [<c041e8d8>] (__dev_open+0x120/0x13c) [<c041e8d8>] (__dev_open) from [<c041ec08>] (__dev_change_flags+0x17c/0x1a8) [<c041ec08>] (__dev_change_flags) from [<c041ec4c>] (dev_change_flags+0x18/0x4c) [<c041ec4c>] (dev_change_flags) from [<c07a5f4c>] (ip_auto_config+0x220/0x10b0) [<c07a5f4c>] (ip_auto_config) from [<c000a4fc>] (do_one_initcall+0x78/0x18c) [<c000a4fc>] (do_one_initcall) from [<c0783e50>] (kernel_init_freeable+0x184/0x1c4) [<c0783e50>] (kernel_init_freeable) from [<c0574d70>] (kernel_init+0x8/0xe8) [<c0574d70>] (kernel_init) from [<c00090e0>] (ret_from_fork+0x14/0x34) Solve that by initializing bp->queues[0].bp in at91ether_init (as is done in macb_init). Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues") Signed-off-by: Alexandre Belloni <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28bpfilter: check compiler capability in KconfigMasahiro Yamada4-11/+2
With the brand-new syntax extension of Kconfig, we can directly check the compiler capability in the configuration phase. If the cc-can-link.sh fails, the BPFILTER_UMH is automatically hidden by the dependency. I also deleted 'default n', which is no-op. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28hinic: reset irq affinity before freeing irqWei Yongjun1-0/+1
Following warning is seen when rmmod hinic. This is because affinity value is not reset before calling free_irq(). This patch fixes it. [ 55.181232] WARNING: CPU: 38 PID: 19589 at kernel/irq/manage.c:1608 __free_irq+0x2aa/0x2c0 Fixes: 352f58b0d9f2 ("net-next/hinic: Set Rxq irq to specific cpu for NUMA") Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller7-12/+69
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) Missing netlink attribute validation in nf_queue, uncovered by KASAN, from Eric Dumazet. 2) Use pointer to sysctl table, save us 192 bytes of memory per netns. Also from Eric. 3) Possible use-after-free when removing conntrack helper modules due to missing synchronize RCU call. From Taehee Yoo. 4) Fix corner case in systcl writes to nf_log that lead to appending data to uninitialized buffer, from Jann Horn. 5) Jann Horn says we may indefinitely block other users of nf_log_mutex if a userspace access in proc_dostring() blocked e.g. due to a userfaultfd. 6) Fix garbage collection race for unconfirmed conntrack entries, from Florian Westphal. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-06-28Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-4/+6
into drm-fixes Single amdgpu regression fix for stable. Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-06-28Merge branch 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld ↵Dave Airlie3-5/+10
into drm-fixes Misc set of malidp fixes. Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-06-27proc: add proc_seq_releaseChunyu Hu1-1/+10
kmemleak reported some memory leak on reading proc files. After adding some debug lines, find that proc_seq_fops is using seq_release as release handler, which won't handle the free of 'private' field of seq_file, while in fact the open handler proc_seq_open could create the private data with __seq_open_private when state_size is greater than zero. So after reading files created with proc_create_seq_private, such as /proc/timer_list and /proc/vmallocinfo, the private mem of a seq_file is not freed. Fix it by adding the paired proc_seq_release as the default release handler of proc_seq_ops instead of seq_release. Fixes: 44414d82cfe0 ("proc: introduce proc_create_seq_private") Reviewed-by: Christoph Hellwig <[email protected]> CC: Christoph Hellwig <[email protected]> Signed-off-by: Chunyu Hu <[email protected]> Signed-off-by: Al Viro <[email protected]>
2018-06-27ARM64: dts: meson-gxl: fix Mali GPU compatible stringMartin Blumenstingl1-1/+1
meson-gxl-mali.dtsi is only used on GXL SoCs. Thus it should use the GXL specific compatible string instead of the GXBB one. For now this is purely cosmetic since the (out-of-tree) lima driver for this GPU currently uses the "arm,mali-450" match instead of the SoC specific one. However, update the .dts to match the documentation since this driver behavior might change in the future. Signed-off-by: Martin Blumenstingl <[email protected]> Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Kevin Hilman <[email protected]>
2018-06-27ARM64: dts: meson-axg: fix ethernet stability issueJerome Brunet1-1/+14
Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to suffer from the kind of stability issue. Doing an iperf3 download test, we can see a significant number of LPI interrupts on the tx path. After a short while (5 to 15 seconds), the network connection dies. If using rootfs over NFS, the connection may also break during the boot sequence. We still don't have a real explanation for this problem so let's disable EEE once again. Fixes: f6f6ac914b82 ("ARM64: dts: meson-axg: enable ethernet for A113D S400 board") Signed-off-by: Jerome Brunet <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Kevin Hilman <[email protected]>
2018-06-27ARM64: dts: meson-gx: fix ATF reserved memory regionKevin Hilman2-8/+6
Vendor firmware/uboot has different reserved regions depending on firmware version, but current codebase reserves the same regions on GXL and GXBB, so move the additional reserved memory region to common .dtsi. Found when putting a recent vendor u-boot on meson-gxbb-p200. Suggested-by: Neil Armstrong <[email protected]> Cc: [email protected] Signed-off-by: Kevin Hilman <[email protected]>
2018-06-27ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0Neil Armstrong1-0/+7
Like LibreTech-CC, the USB0 needs the 5V regulator to be enabled to power the devices on the P212 Reference Design based boards. Fixes: b9f07cb4f41f ("ARM64: dts: meson-gxl-s905x-p212: enable the USB controller") Signed-off-by: Neil Armstrong <[email protected]> Acked-by: Martin Blumenstingl <[email protected]> Signed-off-by: Kevin Hilman <[email protected]>
2018-06-27ARM64: dts: meson: fix register ranges for SD/eMMCKevin Hilman2-5/+5
Based on updated information from Amlogic, correct the register range for the SD/eMMC blocks to the right size. Reported-by: Yixun Lan <[email protected]> Tested-by: Yixun Lan <[email protected]> Signed-off-by: Kevin Hilman <[email protected]>
2018-06-27ARM64: dts: meson: disable sd-uhs modes on the libretech-ccJerome Brunet1-3/+0
There is a problem with the sd-uhs mode when doing a soft reboot. Switching back from 1.8v to 3.3v messes with the card, which no longer respond (timeout errors). According to the specification, we should perform a card reset (power cycling the card) but this is something we cannot control on this design. Then the only solution to restore the communication with the card is an "unplug-plug" which is not acceptable Until we find a solution, if any, disable the sd-uhs modes on this design. For the people using uhs at the moment, there will a performance drop as a result. Fixes: 3cde63ebc85c ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes") Signed-off-by: Jerome Brunet <[email protected]> Cc: [email protected] Signed-off-by: Kevin Hilman <[email protected]>
2018-06-27drm/amd/display: release spinlock before committing updates to streamShirish S1-4/+2
Currently, amdgpu_do_flip() spinlocks crtc->dev->event_lock and releases it only after committing updates to the stream. dc_commit_updates_for_stream() should be moved out of spinlock for the below reasons: 1. event_lock is supposed to protect access to acrct->pflip_status _only_ 2. dc_commit_updates_for_stream() has potential sleep's and also its not appropriate to be in an atomic state for such long sequences of code. Signed-off-by: Shirish S <[email protected]> Suggested-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-06-27drm/amdgpu:Support new VCN FW version naming conventionJames Zhu1-6/+27
Support new VCN FW version naming convention: [31, 28] for VEP interface major version if applicable [27, 24] for decode interface major version [23, 20] for encode interface major version [19, 12] for encode interface minor version [11, 0] for firmware revision Bit 20-23, it is encode major and non-zero for new naming convention. This field is part of version minor and DRM_DISABLED_FLAG in old naming convention. Since the latest version minor is 0x5B and DRM_DISABLED_FLAG is zero in old naming convention, this field is always zero so far. These four bits are used to tell which naming convention is present. Signed-off-by: James Zhu <[email protected]> Reviewed-by: Fang, Peter <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-06-27drm/amdgpu: fix UBSAN: Undefined behaviour for amdgpu_fence.cLeo Liu1-1/+1
Here is the UBSAN dump: [ 3.866656] index 2 is out of range for type 'amdgpu_uvd_inst [2]' [ 3.866693] Workqueue: events work_for_cpu_fn [ 3.866702] Call Trace: [ 3.866710] dump_stack+0x85/0xc5 [ 3.866719] ubsan_epilogue+0x9/0x40 [ 3.866727] __ubsan_handle_out_of_bounds+0x89/0x90 [ 3.866737] ? rcu_read_lock_sched_held+0x58/0x60 [ 3.866746] ? __kmalloc+0x26c/0x2d0 [ 3.866846] amdgpu_fence_driver_start_ring+0x259/0x280 [amdgpu] [ 3.866896] amdgpu_ring_init+0x12c/0x710 [amdgpu] [ 3.866906] ? sprintf+0x42/0x50 [ 3.866956] amdgpu_gfx_kiq_init_ring+0x1bc/0x3a0 [amdgpu] [ 3.867009] gfx_v8_0_sw_init+0x1ad3/0x2360 [amdgpu] [ 3.867062] ? smu7_init+0xec/0x160 [amdgpu] [ 3.867109] amdgpu_device_init+0x112c/0x1dc0 [amdgpu] 'ring->me' might be set as 2 with 'amdgpu_gfx_kiq_init_ring', that would cause out of range for 'amdgpu_uvd_inst[2]'. v2: simplified with ring type Signed-off-by: Leo Liu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-06-27Merge tag 'xfs-4.18-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds12-130/+205
Pull xfs fixes from Darrick Wong: "Here are some patches for 4.18 to fix regressions, accounting problems, overflow problems, and to strengthen metadata validation to prevent corruption. This series has been run through a full xfstests run over the weekend and through a quick xfstests run against this morning's master, with no major failures reported. Changes since last update: - more metadata validation strengthening to prevent crashes. - fix extent offset overflow problem when insert_range on a 512b block fs - fix some off-by-one errors in the realtime fsmap code - fix some math errors in the default resblks calculation when free space is low - fix a problem where stale page contents are exposed via mmap read after a zero_range at eof - fix accounting problems with per-ag reservations causing statfs reports to vary incorrectly" * tag 'xfs-4.18-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix fdblocks accounting w/ RMAPBT per-AG reservation xfs: ensure post-EOF zeroing happens after zeroing part of a file xfs: fix off-by-one error in xfs_rtalloc_query_range xfs: fix uninitialized field in rtbitmap fsmap backend xfs: recheck reflink state after grabbing ILOCK_SHARED for a write xfs: don't allow insert-range to shift extents past the maximum offset xfs: don't trip over negative free space in xfs_reserve_blocks xfs: allow empty transactions while frozen xfs: xfs_iflush_abort() can be called twice on cluster writeback failure xfs: More robust inode extent count validation xfs: simplify xfs_bmap_punch_delalloc_range
Powered by cgit, Gruvboxed by Blaster4385.