aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-09-19arm64: dts: qcom: sa8775p-ride: Describe sgmii_phy0 irqAndrew Halaney1-0/+1
There's an irq hooked up, so let's describe it. Prior to commit 9757300d2750 ("pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets") one would not see the IRQ fire, despite some (invasive) debugging showing that the GPIO was in fact asserted, resulting in the interface staying down. Now that the IRQ is properly routed we can describe it. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230817213815.638189-2-ahalaney@redhat.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb5165-rb5: enable DP altmodeDmitry Baryshkov1-0/+7
Add displayport altmode declaration to the Type-C controller node to enable DP altmode negotiation. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230817145940.9887-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb5165-rb5: enable displayport controllerDmitry Baryshkov1-0/+13
Enable the onboard displayport controller, connect it to QMP PHY. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230817145940.9887-4-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb5165-rb5: add onboard USB-C redriverDmitry Baryshkov1-2/+50
Add the nb7vpq904m, onboard USB-C redriver / retimer. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230817145940.9887-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm8250: Add DisplayPort device nodeDmitry Baryshkov1-0/+89
Declare the displayport controller present on the Qualcomm SM8250 SoC. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230817145940.9887-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for ↵Bryan O'Donoghue2-0/+13
usb_1_qmpphy Switch on USB orientation-switching for usb_1_qmp via TCPM. Detecting the orientation switch is required to get the PHY to reset and bring-up the PHY with the CC lines set to the appropriate lane. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230816115151.501736-8-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1Bryan O'Donoghue2-1/+22
Switch on usb-role-switching for usb_1 via TCPM. We need to declare usb-role-switch in &usb_1 and associate with the remote-endpoint in TCPM which provides the necessary signal. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230816115151.501736-7-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb5165-rb5: Switch on basic TCPMBryan O'Donoghue1-0/+20
Switch on TCPM for the RB5. Here we declare as a source only not a sink since qrb5165 doesn't support powering exclusively from the type-c port. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230816115151.501736-6-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb5165-rb5: Switch on Type-C VBUS boostBryan O'Donoghue1-0/+6
Switch on VBUS for the Type-C port. We need to support a higher amperage than the bootloader set 2 Amps. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230816115151.501736-5-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: pm8150b: Add a TCPM descriptionBryan O'Donoghue1-0/+40
Type-C port management functionality lives inside of the PMIC block on pm8150b. The Type-C port management logic controls orientation detection, vbus/vconn sense and to send/receive Type-C Power Domain messages. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230816115151.501736-4-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm8250: Define ports for qmpphy orientation-switchingBryan O'Donoghue1-0/+17
ports for orientation switching input and output. The individual board dts files will instantiate port@0, port@1 and/or port@2 depending on the supported feature-set. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230816115151.501736-3-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sc7180: Reorganize trogdor rt5682 audio codec dtsDouglas Anderson27-36/+104
It was asserted that the "/delete-property/ VBAT-supply;" that we needed to do in the rt5682s dts fragment was ugly. Let's change up all the trogdor device trees to make it explicit which version of "rt5682" we have and avoid the need for the "delete-property". As a side effect, this nicely gets rid of the need for a delete-node in coachz, which doesn't use "rt5682" at all. A few notes: - This doesn't get rid of every "/delete-node/" in trogdor, just the one that was used for rt5682s. - Though we no longer have any "/delete-node/", we do still override the "model" in the "sound" node in one case (in pompom) since that uses the "2mic" sound setup. This is validated to produce the same result (other than a few properties being reordered) when taking the dtbs generated by the kernel build and then doing: for dtb in *trogdor*.dtb; do dtc -I dtb -O dts $dtb -o out/$dtb.dts; done Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Link: https://lore.kernel.org/r/20230816112143.2.I29a5a330b6994afca81871f74bbacaf55b155937@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sc7180: Move trogdor rt5682s bits to a fragmentDouglas Anderson5-48/+21
Several trogdor boards have moved from the older rt5862i to the newer rt5862s, at least on newer revisions of boards. Let's get rid of the dts duplication across boards and promote this to a fragment. Note: The old boards used to override the "compatible" in the "sound" node with the exact same thing that was in "sc7180-trogdor.dtsi" ("google,sc7180-trogdor"). I got rid of that. This is validated to produce the same result when taking the dtbs generated by the kernel build and then doing: for dtb in *trogdor*.dtb; do dtc -I dtb -O dts $dtb -o out/$dtb.dts; done Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Link: https://lore.kernel.org/r/20230816112143.1.I7227efd47e0dc42b6ff243bd22aa1a3e01923220@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: ipq5018: add watchdogRobert Marko1-0/+7
Add the required DT node for watchdog operation. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230816161455.3310629-2-robimarko@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sc7280-crd: add Bluetooth VDDIO supplyKrzysztof Kozlowski1-0/+4
Bluetooth requires VDDIO supply and Doug Anderson suggested it is vreg_l18b_1p8. Add one to satisfy `dtbs_check`: sc7280-crd-r3.dtb: bluetooth: 'vddio-supply' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230816060502.16789-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb2210-rb1: Hook up USB3Konrad Dybcio1-0/+6
Configure the USB3 PHY to enable USB3 functionality Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230906-topic-rb1_features_sans_icc-v1-5-e92ce6fbde16@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb2210-rb1: Add GPIO LEDsKonrad Dybcio1-0/+33
Add the three LEDs (blue/yellow/green) connected to TLMM GPIOs. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230906-topic-rb1_features_sans_icc-v1-4-e92ce6fbde16@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb2210-rb1: Enable remote processorsKonrad Dybcio1-0/+18
Enable the ADSP, MPSS and Wi-Fi. Tighten up the Wi-Fi regulators to make them compliant with that the chip expects. The Wi-Fi reports: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000 Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230906-topic-rb1_features_sans_icc-v1-3-e92ce6fbde16@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb2210-rb1: Fix regulatorsKonrad Dybcio1-43/+43
Commit b4fe47d12f1f ("arm64: dts: qcom: qrb2210-rb1: Add regulators") introduced regulator settings that were never put in place, as all of the properties ended 'microvolts' instead of 'microvolt' (which dt schema did not check for back then). Fix the microvolts-microvolt typo and adjust voltage ranges where it's necessary to fit within the volt = base + n*step formula. Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: b4fe47d12f1f ("arm64: dts: qcom: qrb2210-rb1: Add regulators") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230906-topic-rb1_features_sans_icc-v1-2-e92ce6fbde16@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: qrb2210-rb1: Swap UART indexKonrad Dybcio1-2/+2
Newer RB1 board revisions have a debug UART on QUP0. Sadly, it looks like even when ordering one in retail, customers receive prototype boards with "Enginering Sample" written on them. Use QUP4 for UART to make all known RB1 boards boot. Fixes: e18771961336 ("arm64: dts: qcom: Add initial QTI RB1 device tree") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230906-topic-rb1_features_sans_icc-v1-1-e92ce6fbde16@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sc7280: Add missing LMH interruptsKonrad Dybcio1-0/+8
Hook up the interrupts that signal the Limits Management Hardware has started some sort of throttling action. Fixes: 7dbd121a2c58 ("arm64: dts: qcom: sc7280: Add cpufreq hw node") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230811-topic-7280_lmhirq-v1-1-c262b6a25c8f@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sc8180x: switch UFS QMP PHY to new style of bindingsDmitry Baryshkov1-14/+6
Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230731111158.3998107-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sc7180: Link trogdor touchscreens to the panelsDouglas Anderson6-0/+6
Let's provide the proper link from the touchscreen to the panel on trogdor devices where the touchscreen support it. This allows the OS to power sequence the touchscreen more properly. For the most part, this is just expected to marginally improve power consumption while the screen is off. However, in at least one trogdor model (wormdingler) it's suspected that this will fix some behavorial corner cases when the panel power cycles (like for a modeset) without the touchscreen power cycling. NOTE: some trogdor variants use touchscreens that don't (yet) support linking the touchscreen and the panel. Those variants are left alone. Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Benjamin Tissoires <bentiss@kernel.org> Acked-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20230727101636.v4.11.Ia06c340e3482563e6bfd3106ecd0d3139f173ca4@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8916-samsung-gt510: Add capacitive keysNikita Travkin1-0/+2
gt510 has two capacitive keys on the bottom. Define keycodes to enable them. Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20230725-gt5-panel-v1-3-7c787e33a614@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8916-samsung-gt58: Add display panelSiddharth Manthan1-0/+64
The device has a 8 inch lsl080al03 display. Add it to the device tree. Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com> Co-developed-by: Nikita Travkin <nikita@trvn.ru> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230725-gt5-panel-v1-2-7c787e33a614@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8916-samsung-gt510: Add display panelJasper Korten1-0/+84
The device has a 9.7 inch ltl101at01 display. Add it to the device tree. Signed-off-by: Jasper Korten <jja2000@gmail.com> Co-developed-by: Nikita Travkin <nikita@trvn.ru> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230725-gt5-panel-v1-1-7c787e33a614@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panelMarijn Suijten1-0/+59
Enable MDSS and DSI, and configure the Samsung SOFEF01-M ams597ut01 6.0" 1080x2520 panel. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-17-a3f287dd6c07@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6125: Add display hardware nodesMarijn Suijten1-2/+191
Add the DT nodes that describe the MDSS hardware on SM6125, containing one MDP (display controller) together with a single DSI and DSI PHY. No DisplayPort support is added for now. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-16-a3f287dd6c07@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6125: Add dispcc nodeMarijn Suijten1-0/+29
Enable and configure the dispcc node on SM6125 for consumption by MDSS later on. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-15-a3f287dd6c07@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6125: Switch fixed xo_board clock to RPM XO clockMarijn Suijten1-3/+4
We have a working RPM XO clock; no other driver except rpmcc should be parenting directly to the fixed-factor xo_board clock nor should it be reachable by that global name. Remove the name to that effect, so that every clock relation is explicitly defined in DTS. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-14-a3f287dd6c07@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by regMarijn Suijten1-18/+18
This node has always resided in the wrong spot, making it somewhat harder to contribute new node entries while maintaining proper sorting around it. Move the node up to sit after hsusb_phy1 where it maintains proper numerical sorting on the (first of its many) reg address property. Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-3-a3f287dd6c07@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6125: Pad APPS IOMMU address to 8 charactersMarijn Suijten1-1/+1
APPS IOMMU is the only node in sm6125.dtsi that doesn't have its address padded to 8 hexadecimals; fix this by prepending a 0. Fixes: 8ddb4bc3d3b5 ("arm64: dts: qcom: sm6125: Configure APPS SMMU") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-2-a3f287dd6c07@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm630: align USB DWC3 clocks with bindingsKrzysztof Kozlowski1-3/+3
Bindings require different order of clocks for USB DWC3 nodes (sleep before mock_utmi). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230723141849.93078-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sc8180x: align USB DWC3 clocks with bindingsKrzysztof Kozlowski1-4/+4
Bindings require different order of clocks for USB DWC3 nodes (sleep before mock_utmi). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230723141849.93078-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8992-libra: drop duplicated reserved memoryKrzysztof Kozlowski1-5/+0
There are two entries for similar reserved memory: qseecom@cb400000 and audio@cb400000. Keep the qseecom as it is longer. Warning (unique_unit_address_if_enabled): /reserved-memory/audio@cb400000: duplicate unit-address (also used in node /reserved-memory/qseecom@cb400000) Fixes: 69876bc6fd4d ("arm64: dts: qcom: msm8992-libra: Fix the memory map") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230720072048.10093-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8994: fix duplicated @6c00000 reserved memoryKrzysztof Kozlowski3-1/+3
Reserved memory @6c00000 is defined in MSM8994 DTSI and few boards: Warning (unique_unit_address_if_enabled): /reserved-memory/reserved@6c00000: duplicate unit-address (also used in node /reserved-memory/hole2@6c00000) Warning (unique_unit_address_if_enabled): /reserved-memory/reserved@6c00000: duplicate unit-address (also used in node /reserved-memory/memory@6c00000) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230720072048.10093-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm630: Add support for modem remoteprocAlexey Minnekhanov1-0/+59
Modem subsystem in SDM630/660 is similar to MSM8998 and device tree node for it is based on the one from msm8998.dtsi. Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20230719093458.2668842-1-alexeymin@postmarketos.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sc7280: Remove qcom,adsp-bypass-modeKonrad Dybcio1-1/+0
This property isn't used or defined anymore. Get rid of it. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230714-topic-lpass_lpi_cleanup-v1-3-dc18b5bd14f7@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm8450-hdk: add other analogue microphonesKrzysztof Kozlowski1-7/+16
Add proper audio routes for onboard analogue microphones: AMIC[1345]. Use also new DAPM input widget (TX SWR_INPUTn) for them, not the deprecated ADC one. Change is not compatible with older kernels not having the new SWR_INPUTn input widget. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230717143824.203352-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm8550: Add camera clock controllerJagadeesh Kona1-0/+15
Add device node for camera clock controller on Qualcomm SM8550 platform. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230707035744.22245-6-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19Merge branch '20230707035744.22245-2-quic_jkona@quicinc.com' into arm64-for-6.7Bjorn Andersson7-2/+3796
Merge the SM8550 camera clock controller through a topic branch, to get access to the DeviceTree bindings.
2023-09-19clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocksJagadeesh Kona1-0/+181
Add support for camera qdss, sleep and xo clocks. Co-developed-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230707035744.22245-5-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550Jagadeesh Kona3-0/+3391
Add support for the camera clock controller for camera clients to be able to request for camcc clocks on SM8550 platform. Co-developed-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230707035744.22245-4-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19clk: qcom: clk-alpha-pll: Add support for lucid ole pll configureJagadeesh Kona2-0/+31
Lucid ole pll has as extra RINGOSC_CAL_L field in L register in addition to the fields that are part of lucid evo pll, hence add support for lucid ole pll configure function to configure the ole plls. Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230707035744.22245-3-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19dt-bindings: clock: qcom: Add SM8550 camera clock controllerJagadeesh Kona2-2/+193
Add device tree bindings for the camera clock controller on Qualcomm SM8550 platform. Co-developed-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230707035744.22245-2-quic_jkona@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-15arm64: dts: qcom: msm8916: Fix iommu local address rangeGaurav Kohli1-1/+1
Fix the apps iommu local address space range as per data sheet. Fixes: 6a6729f38436 ("arm64: dts: qcom: msm8916: Add IOMMU support") Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230915143304.477-1-quic_gkohli@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-15arm64: dts: qcom: sm8250: Add interconnects and power-domains to QUPsKonrad Dybcio1-0/+286
Describe the interconnect paths related to QUPs and add the power-domains powering them. This is required for icc sync_state, as otherwise QUP access is gated. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-4-9ba0a9460be2@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-14arm64: dts: qcom: sm8250: switch USB+DP QMP PHY to new style of bindingsDmitry Baryshkov1-35/+14
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711120916.4165894-11-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-14arm64: dts: qcom: sm8150: switch USB+DP QMP PHY to new style of bindingsDmitry Baryshkov1-27/+17
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711120916.4165894-10-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-14arm64: dts: qcom: sdm845: switch USB+DP QMP PHY to new style of bindingsDmitry Baryshkov1-38/+19
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711120916.4165894-9-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.