| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use builtin_platform_driver() helper to simplify the code.
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Eric Saint Etienne <[email protected]>
Signed-off-by: Allen Pais <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
... to better explain its purpose after introducing in-place encryption
without bounce buffer.
Signed-off-by: David Gstir <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
Since fscrypt users can now indicated if fscrypt_encrypt_page() should
use a bounce page, we can delay the bounce page pool initialization util
it is really needed. That is until fscrypt_operations has no
FS_CFLG_OWN_PAGES flag set.
Signed-off-by: David Gstir <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
Rename the FS_CFLG_INPLACE_ENCRYPTION flag to FS_CFLG_OWN_PAGES which,
when set, indicates that the fs uses pages under its own control as
opposed to writeback pages which require locking and a bounce buffer for
encryption.
Signed-off-by: David Gstir <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
- Improve documentation
- Add BUG_ON(len == 0) to avoid accidental switch of offs and len
parameters
- Improve variable names for readability
Signed-off-by: David Gstir <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
In case of in-place encryption fscrypt_ctx was allocated but never
released. Since we don't need it for in-place encryption, we skip
allocating it.
Fixes: 1c7dcf69eea3 ("fscrypt: Add in-place encryption mode")
Signed-off-by: David Gstir <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
Actually use the fs-provided index instead of always using page->index
which is only set for page-cache pages.
Fixes: 9c4bb8a3a9b4 ("fscrypt: Let fs select encryption index/tweak")
Signed-off-by: David Gstir <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
These constants are part of the UAPI, so they belong in
include/uapi/linux/fs.h instead of include/linux/fscrypto.h
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
|
|
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
|
|
The fscrypt_initalize() function isn't used outside fs/crypto, so
there's no point making it be an exported symbol.
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
|
|
To avoid namespace collisions, rename get_crypt_info() to
fscrypt_get_crypt_info(). The function is only used inside the
fs/crypto directory, so declare it in the new header file,
fscrypt_private.h.
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
|
|
Multiple bugs were recently fixed in the "set encryption policy" ioctl.
To make it clear that fscrypt_process_policy() and fscrypt_get_policy()
implement ioctls and therefore their implementations must take standard
security and correctness precautions, rename them to
fscrypt_ioctl_set_policy() and fscrypt_ioctl_get_policy(). Make the
latter take in a struct file * to make it consistent with the former.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
SHA256 and ENCRYPTED_KEYS are not needed. CTR shouldn't be needed
either, but I left it for now because it was intentionally added by
commit 71dea01ea2ed ("ext4 crypto: require CONFIG_CRYPTO_CTR if ext4
encryption is enabled"). So it sounds like there may be a dependency
problem elsewhere, which I have not been able to identify specifically,
that must be solved before CTR can be removed.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
The filesystem level encryption support, currently used by ext4 and f2fs
and proposed for ubifs, does not yet have a dedicated mailing list.
Since no mailing lists were specified in MAINTAINERS, get_maintainer.pl
only recommended to send patches directly to the maintainers and to
linux-kernel. This patch adds linux-fsdevel as the preferred mailing
list for fscrypto patches for the time being.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
Just prep work to polish and consolidate all the dma-buf related
documenation.
Unfortunately I didn't discover a way to both integrate this new file
into the overall toc while keeping it at the current place. Work
around that by moving it into the overall driver-api/index.rst.
Cc: [email protected]
Cc: Jonathan Corbet <[email protected]>
Cc: Sumit Semwal <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
|
|
Pull MIPS fixes from Ralf Baechle:
"Two more MIPS fixes for 4.9:
- RTC: Return -ENODEV so an external RTC will be tried
- Fix mask of GPE frequency
These two have been tested on Imagination's automated test system and
also both received positive reviews on the linux-mips mailing list"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Lantiq: Fix mask of GPE frequency
MIPS: Return -ENODEV from weak implementation of rtc_mips_set_time
|
|
Dump and reset doesn't work unless cmpxchg64() is used both from packet
and control plane paths. This approach is going to be slow though.
Instead, use a percpu seqcount to fetch counters consistently, then
subtract bytes and packets in case a reset was requested.
The cpu that running over the reset code is guaranteed to own this stats
exclusively, we have to turn counters into signed 64bit though so stats
update on reset don't get wrong on underflow.
This patch is based on original sketch from Eric Dumazet.
Fixes: 43da04a593d8 ("netfilter: nf_tables: atomic dump and reset for stateful objects")
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
find_idlest_group() only compares the runnable_load_avg when looking
for the least loaded group. But on fork intensive use case like
hackbench where tasks blocked quickly after the fork, this can lead to
selecting the same CPU instead of other CPUs, which have similar
runnable load but a lower load_avg.
When the runnable_load_avg of 2 CPUs are close, we now take into
account the amount of blocked load as a 2nd selection factor. There is
now 3 zones for the runnable_load of the rq:
- [0 .. (runnable_load - imbalance)]:
Select the new rq which has significantly less runnable_load
- [(runnable_load - imbalance) .. (runnable_load + imbalance)]:
The runnable loads are close so we use load_avg to chose
between the 2 rq
- [(runnable_load + imbalance) .. ULONG_MAX]:
Keep the current rq which has significantly less runnable_load
The scale factor that is currently used for comparing runnable_load,
doesn't work well with small value. As an example, the use of a
scaling factor fails as soon as this_runnable_load == 0 because we
always select local rq even if min_runnable_load is only 1, which
doesn't really make sense because they are just the same. So instead
of scaling factor, we use an absolute margin for runnable_load to
detect CPUs with similar runnable_load and we keep using scaling
factor for blocked load.
For use case like hackbench, this enable the scheduler to select
different CPUs during the fork sequence and to spread tasks across the
system.
Tests have been done on a Hikey board (ARM based octo cores) for
several kernel. The result below gives min, max, avg and stdev values
of 18 runs with each configuration.
The patches depend on the "no missing update_rq_clock()" work.
hackbench -P -g 1
ea86cb4b7621 7dc603c9028e v4.8 v4.8+patches
min 0.049 0.050 0.051 0,048
avg 0.057 0.057(0%) 0.057(0%) 0,055(+5%)
max 0.066 0.068 0.070 0,063
stdev +/-9% +/-9% +/-8% +/-9%
More performance numbers here:
https://lkml.kernel.org/r/[email protected]
Tested-by: Matt Fleming <[email protected]>
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: [email protected]
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
During fork, the utilization of a task is init once the rq has been
selected because the current utilization level of the rq is used to
set the utilization of the fork task. As the task's utilization is
still 0 at this step of the fork sequence, it doesn't make sense to
look for some spare capacity that can fit the task's utilization.
Furthermore, I can see perf regressions for the test:
hackbench -P -g 1
because the least loaded policy is always bypassed and tasks are not
spread during fork.
With this patch and the fix below, we are back to same performances as
for v4.8. The fix below is only a temporary one used for the test
until a smarter solution is found because we can't simply remove the
test which is useful for others benchmarks
| @@ -5708,13 +5708,6 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t
|
| avg_cost = this_sd->avg_scan_cost;
|
| - /*
| - * Due to large variance we need a large fuzz factor; hackbench in
| - * particularly is sensitive here.
| - */
| - if ((avg_idle / 512) < avg_cost)
| - return -1;
| -
| time = local_clock();
|
| for_each_cpu_wrap(cpu, sched_domain_span(sd), target, wrap) {
Tested-by: Matt Fleming <[email protected]>
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Acked-by: Morten Rasmussen <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Commit:
3cded4179481 ("x86/paravirt: Optimize native pv_lock_ops.vcpu_is_preempted()")
introduced a paravirt op with bool return type [*]
It turns out that the PVOP_CALL*() macros miscompile when rettype is
bool. Code that looked like:
83 ef 01 sub $0x1,%edi
ff 15 32 a0 d8 00 callq *0xd8a032(%rip) # ffffffff81e28120 <pv_lock_ops+0x20>
84 c0 test %al,%al
ended up looking like so after PVOP_CALL1() was applied:
83 ef 01 sub $0x1,%edi
48 63 ff movslq %edi,%rdi
ff 14 25 20 81 e2 81 callq *0xffffffff81e28120
48 85 c0 test %rax,%rax
Note how it tests the whole of %rax, even though a typical bool return
function only sets %al, like:
0f 95 c0 setne %al
c3 retq
This is because ____PVOP_CALL() does:
__ret = (rettype)__eax;
and while regular integer type casts truncate the result, a cast to
bool tests for any !0 value. Fix this by explicitly truncating to
sizeof(rettype) before casting.
[*] The actual bug should've been exposed in commit:
446f3dc8cc0a ("locking/core, x86/paravirt: Implement vcpu_is_preempted(cpu) for KVM and Xen guests")
but that didn't properly implement the paravirt call.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alok Kataria <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Chris Wright <[email protected]>
Cc: Jeremy Fitzhardinge <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Pan Xinhui <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Peter Anvin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 3cded4179481 ("x86/paravirt: Optimize native pv_lock_ops.vcpu_is_preempted()")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
While chasing a regression I noticed we potentially patch the wrong
code in native_patch().
If we do not select the native code sequence, we must use the default
patcher, not fall-through the switch case.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alok Kataria <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Chris Wright <[email protected]>
Cc: Jeremy Fitzhardinge <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Pan Xinhui <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Peter Anvin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: kernel test robot <[email protected]>
Fixes: 3cded4179481 ("x86/paravirt: Optimize native pv_lock_ops.vcpu_is_preempted()")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
An earlier patch allowed enabling PT and LBR at the same
time on Goldmont. However it also allowed enabling BTS and LBR
at the same time, which is still not supported. Fix this by
bypassing the check only for PT.
Signed-off-by: Andi Kleen <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]>
Fixes: ccbebba4c6bf ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The hardware documentation says bit 11:10 are used for the GPE
frequency selection. Fix the mask in the define to match these bits.
Signed-off-by: Hauke Mehrtens <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Reviewed-by: Thomas Langer <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14648/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
The sync_cmos_clock function in kernel/time/ntp.c first tries to update
the internal clock of the cpu by calling the "update_persistent_clock64"
architecture specific function. If this returns -ENODEV, it then tries
to update an external RTC using "rtc_set_ntp_time".
On the mips architecture, the weak implementation of the underlying
function would return 0 if it wasn't overridden. This meant that the
sync_cmos_clock function would never try to update an external RTC
(if both CONFIG_GENERIC_CMOS_UPDATE and CONFIG_RTC_SYSTOHC are
configured)
Returning -ENODEV instead, means that an external RTC will be tried.
Signed-off-by: Luuk Paulussen <[email protected]>
Reviewed-by: Richard Laing <[email protected]>
Reviewed-by: Scott Parlane <[email protected]>
Reviewed-by: Chris Packham <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14649/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
In commit 02cea3958664 ("genirq: Provide disable_hardirq()")
Peter introduced disable_hardirq() for netpoll, but it is forgotten
to use it for e1000.
This patch changes disable_irq() to disable_hardirq() for e1000.
Reported-by: Dave Jones <[email protected]>
Suggested-by: Sabrina Dubroca <[email protected]>
Cc: Peter Zijlstra (Intel) <[email protected]>
Cc: Jeff Kirsher <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The .match_method field is a u8, so we shouldn't be casting to a u16,
and because it is only one byte, we do not need to byte swap anything.
Just assign the value directly. This avoids issues on Big Endian
architectures which would have byte swapped and then incorrectly
truncated the value.
Signed-off-by: Jacob Keller <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Bimmy Pujari <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds support of the cpts device found in the
gbe and 10gbe ethernet switches on the keystone 2 SoCs
(66AK2E/L/Hx, 66AK2Gx).
Cc: Richard Cochran <[email protected]>
Signed-off-by: WingMan Kwok <[email protected]>
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Instead of having individual PHY drivers set the SUPPORTED_Pause and
SUPPORTED_Asym_Pause flags, phylib itself should set those flags,
unless there is a hardware erratum or other special case. During
autonegotiation, the PHYs will determine whether to enable pause
frame support.
Pause frames are a feature that is supported by the MAC. It is the MAC
that generates the frames and that processes them. The PHY can only be
configured to allow them to pass through.
This commit also effectively reverts the recently applied c7a61319
("net: phy: dp83848: Support ethernet pause frames").
So the new process is:
1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause
and SUPPORTED_AsymPause bits in phydev->supported. This indicates that
the PHY supports pause frames.
2) The MAC driver checks phydev->supported before it calls phy_start().
If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver
sets those bits in phydev->advertising, if it wants to enable pause
frame support.
3) When the link state changes, the MAC driver checks phydev->pause and
phydev->asym_pause, If the bits are set, then it enables the corresponding
features in the MAC. The algorithm is:
if (phydev->pause)
The MAC should be programmed to receive and honor
pause frames it receives, i.e. enable receive flow control.
if (phydev->pause != phydev->asym_pause)
The MAC should be programmed to transmit pause
frames when needed, i.e. enable transmit flow control.
Signed-off-by: Timur Tabi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Asbjoern Sloth Toennesen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
PPPOL2TP_MSG_* and L2TP_MSG_* are duplicates, and are being used
interchangeably in the kernel, so let's standardize on L2TP_MSG_*
internally, and keep PPPOL2TP_MSG_* defined in UAPI for compatibility.
Signed-off-by: Asbjoern Sloth Toennesen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Move the L2TP_MSG_* definitions to UAPI, as it is part of
the netlink API.
Signed-off-by: Asbjoern Sloth Toennesen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Lino Sanfilippo says:
====================
Remove private tx queue locks
this patch series removes unnecessary private locks in the sxgbe and the
stmmac driver.
v2:
- adjust commit message
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The driver uses a private lock for synchronization of the xmit function and
the xmit completion handler, but since the NETIF_F_LLTX flag is not set,
the xmit function is also called with the xmit_lock held.
On the other hand the completion handler uses the reverse locking order by
first taking the private lock and (in case that the tx queue had been
stopped) then the xmit_lock.
Improve the locking by removing the private lock and using only the
xmit_lock for synchronization instead.
Signed-off-by: Lino Sanfilippo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The driver uses a private lock for synchronization of the xmit function and
the xmit completion handler, but since the NETIF_F_LLTX flag is not set,
the xmit function is also called with the xmit_lock held.
On the other hand the completion handler uses the reverse locking order by
first taking the private lock and (in case that the tx queue had been
stopped) then the xmit_lock.
Improve the locking by removing the private lock and using only the
xmit_lock for synchronization instead.
Signed-off-by: Lino Sanfilippo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Vivien Didelot says:
====================
net: bridge: fast ageing on topology change
802.1D [1] specifies that the bridges in a network must use a short
value to age out dynamic entries in the Filtering Database for a period,
once a topology change has been communicated by the root bridge.
This patchset fixes this for the in-kernel STP implementation.
Once the topology change flag is set in a net_bridge instance, the
ageing time value is shorten to twice the forward delay used by the
topology.
When the topology change flag is cleared, the ageing time configured for
the bridge is restored.
To accomplish that, a new bridge_ageing_time member is added to the
net_bridge structure, to store the user configured bridge ageing time.
Two helpers are added to offload the ageing time and set the topology
change flag in the net_bridge instance. Then the required logic is added
in the topology change helper if in-kernel STP is used.
This has been tested on the following topology:
+--------------+
| root bridge |
| 1 2 3 4 |
+--+--+--+--+--+
| | | | +--------+
| | | +------| laptop |
| | | +--------+
+--+--+--+-----+
| 1 2 3 |
| slave bridge |
+--------------+
When unplugging/replugging the laptop, the slave bridge (under test)
gets the topology change flag sent by the root bridge, and fast ageing
is triggered on the bridges. Once the topology change timer of the root
bridge expires, the topology change flag is cleared and the configured
ageing time is restored on the bridges.
A similar test has been done between two bridges under test.
When changing the forward delay of the root bridge with:
# echo 3000 > /sys/class/net/br0/bridge/forward_delay
the ageing time correctly changes on both bridges from 300s to 60s while
the TOPOLOGY_CHANGE flag is present.
[1] "8.3.5 Notifying topology changes",
http://profesores.elo.utfsm.cl/~agv/elo309/doc/802.1D-1998.pdf
No change since RFC: https://lkml.org/lkml/2016/10/19/828
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
802.1D [1] specifies that the bridges must use a short value to age out
dynamic entries in the Filtering Database for a period, once a topology
change has been communicated by the root bridge.
Add a bridge_ageing_time member in the net_bridge structure to store the
bridge ageing time value configured by the user (ioctl/netlink/sysfs).
If we are using in-kernel STP, shorten the ageing time value to twice
the forward delay used by the topology when the topology change flag is
set. When the flag is cleared, restore the configured ageing time.
[1] "8.3.5 Notifying topology changes ",
http://profesores.elo.utfsm.cl/~agv/elo309/doc/802.1D-1998.pdf
Signed-off-by: Vivien Didelot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a __br_set_topology_change helper to set the topology change value.
This can be later extended to add actions when the topology change flag
is set or cleared.
Signed-off-by: Vivien Didelot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME switchdev attr is actually set
when initializing a bridge port, and when configuring the bridge ageing
time from ioctl/netlink/sysfs.
Add a __set_ageing_time helper to offload the ageing time to physical
switches, and add the SWITCHDEV_F_DEFER flag since it can be called
under bridge lock.
Signed-off-by: Vivien Didelot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently data journalling is incompatible with encryption: enabling both
at the same time has never been supported by design, and would result in
unpredictable behavior. However, users are not precluded from turning on
both features simultaneously. This change programmatically replaces data
journaling for encrypted regular files with ordered data journaling mode.
Background:
Journaling encrypted data has not been supported because it operates on
buffer heads of the page in the page cache. Namely, when the commit
happens, which could be up to five seconds after caching, the commit
thread uses the buffer heads attached to the page to copy the contents of
the page to the journal. With encryption, it would have been required to
keep the bounce buffer with ciphertext for up to the aforementioned five
seconds, since the page cache can only hold plaintext and could not be
used for journaling. Alternatively, it would be required to setup the
journal to initiate a callback at the commit time to perform deferred
encryption - in this case, not only would the data have to be written
twice, but it would also have to be encrypted twice. This level of
complexity was not justified for a mode that in practice is very rarely
used because of the overhead from the data journalling.
Solution:
If data=journaled has been set as a mount option for a filesystem, or if
journaling is enabled on a regular file, do not perform journaling if the
file is also encrypted, instead fall back to the data=ordered mode for the
file.
Rationale:
The intent is to allow seamless and proper filesystem operation when
journaling and encryption have both been enabled, and have these two
conflicting features gracefully resolved by the filesystem.
Fixes: 4461471107b7
Signed-off-by: Sergey Karamov <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
|
|
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The channels are common for both ndevs in dual emac mode. Hence, keep
in sync their rates.
Signed-off-by: Ivan Khoronzhuk <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Don't re-split res in the following cases:
- speed of phys is not changed
- speed of phys is changed and no rate limited channels
- speed of phys is changed and all channels are rate limited
- phy is unlinked while dev is open
- phy is linked back but speed is not changed
The maximum speed is sum of "linked" phys, thus res are split taken
in account two interfaces, both for dual emac mode and for
switch mode.
Signed-off-by: Ivan Khoronzhuk <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Re-split weight along with budget. It simplify code a little
and update state after every rate change. Also it's necessarily
to move arguments checks to this combined function. Replace
maximum rate check for an interface on maximum possible rate.
Signed-off-by: Ivan Khoronzhuk <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
No need to start queues after cpsw is started as it will be done
while cpsw_adjust_link(), after phy connection.
Signed-off-by: Ivan Khoronzhuk <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use the same, more convenient macros, to get active slave.
Signed-off-by: Ivan Khoronzhuk <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|