aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-07net/mlx5: Release devlink object if adev failsLeon Romanovsky1-2/+5
Add missed freeing previously allocated devlink object. Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-01-07net/mlx5e: ethtool, Fix restriction of autoneg with 56GAya Levin1-6/+18
Prior to this patch, configuring speed to 50G with autoneg off over devices supporting 50G per lane failed. Support for 50G per lane introduced a new set of link-modes, on which driver always performed a speed validation as if only legacy link-modes were configured. Fix driver speed validation to force setting autoneg over 56G only if in legacy link-mode. Fixes: 3d7cadae51f1 ("net/mlx5e: ethtool, Fix analysis of speed setting") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-01-07net/mlx5e: In skb build skip setting mark in switchdev modeMaor Dickman1-0/+5
sop_drop_qpn field in the cqe is used by two features, in SWITCHDEV mode to restore the chain id in case of a miss and in LEGACY mode to support skbedit mark action. In build RX skb, the skb mark field is set regardless of the configured mode which cause a corruption of the mark field in case of switchdev mode. Fix by overriding the mark value back to 0 in the representor tc update skb flow. Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Raed Salem <[email protected]> Reviewed-by: Oz Shlomo <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-01-07net/mlx5: E-Switch, fix changing vf VLANIDAlaa Hleihel1-14/+13
Adding vf VLANID for the first time, or after having cleared previously defined VLANID works fine, however, attempting to change an existing vf VLANID clears the rules on the firmware, but does not add new rules for the new vf VLANID. Fix this by changing the logic in function esw_acl_egress_lgcy_setup() so that it will always configure egress rules. Fixes: ea651a86d468 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes") Signed-off-by: Alaa Hleihel <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-01-07net/mlx5e: Fix SWP offsets when vlan inserted by driverMoshe Shemesh3-7/+19
In case WQE includes inline header the vlan is inserted by driver even if vlan offload is set. On geneve over vlan interface where software parser is used the SWP offsets should be updated according to the added vlan. Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-01-07net/mlx5e: CT: Use per flow counter when CT flow accounting is enabledOz Shlomo1-28/+49
Connection counters may be shared for both directions when the counter is used for connection aging purposes. However, if TC flow accounting is enabled then a unique counter is required per direction. Instantiate a unique counter per direction if the conntrack accounting extension is enabled. Use a shared counter when the connection accounting extension is disabled. Fixes: 1edae2335adf ("net/mlx5e: CT: Use the same counter for both directions") Signed-off-by: Oz Shlomo <[email protected]> Reported-by: Marcelo Ricardo Leitner <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Paul Blakey <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-01-07net/mlx5: Use port_num 1 instead of 0 when delete a RoCE addressMark Zhang1-1/+1
In multi-port mode, FW reports syndrome 0x2ea48 (invalid vhca_port_number) if the port_num is not 1 or 2. Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic") Signed-off-by: Mark Zhang <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-01-07net/mlx5e: Add missing capability check for uplink followAya Levin2-2/+4
Expose firmware indication that it supports setting eswitch uplink state to follow (follow the physical link). Condition setting the eswitch uplink admin-state with this capability bit. Older FW may not support the uplink state setting. Fixes: 7d0314b11cdd ("net/mlx5e: Modify uplink state on interface up/down") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-01-07net/mlx5: Check if lag is supported before creating oneMark Zhang1-6/+5
This patch fixes a memleak issue by preventing to create a lag and add PFs if lag is not supported. comm “python3”, pid 349349, jiffies 4296985507 (age 1446.976s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ……………. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ……………. backtrace: [<000000005b216ae7>] mlx5_lag_add+0x1d5/0×3f0 [mlx5_core] [<000000000445aa55>] mlx5e_nic_enable+0x66/0×1b0 [mlx5_core] [<00000000c56734c3>] mlx5e_attach_netdev+0x16e/0×200 [mlx5_core] [<0000000030439d1f>] mlx5e_attach+0x5c/0×90 [mlx5_core] [<0000000018fd8615>] mlx5e_add+0x1a4/0×410 [mlx5_core] [<0000000068bc504b>] mlx5_add_device+0x72/0×120 [mlx5_core] [<000000009fce51f9>] mlx5_register_device+0x77/0xb0 [mlx5_core] [<00000000d0d81ff3>] mlx5_load_one+0xc58/0×1eb0 [mlx5_core] [<0000000045077adc>] init_one+0x3ea/0×920 [mlx5_core] [<0000000043287674>] pci_device_probe+0xcd/0×150 [<00000000dafd3279>] really_probe+0x1c9/0×4b0 [<00000000f06bdd84>] driver_probe_device+0x5d/0×140 [<00000000e3d508b6>] device_driver_attach+0x4f/0×60 [<0000000084fba0f0>] bind_store+0xbf/0×120 [<00000000bf6622b3>] kernfs_fop_write+0x114/0×1b0 Fixes: 9b412cc35f00 ("net/mlx5e: Add LAG warning if bond slave is not lag master") Signed-off-by: Mark Zhang <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-01-07Merge tag 'spi-fix-v5.11-rc2' of ↵Linus Torvalds4-21/+104
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of core fixes here, both to do with handling of drivers which don't report their maximum speed since we factored some of the handling for transfer speeds out into the core in the previous release. There's also some driver specific fixes, including a relatively large set for some races around timeouts in spi-geni-qcom" * tag 'spi-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix the divide by 0 error when calculating xfer waiting time spi: Fix the clamping of spi->max_speed_hz spi: altera: fix return value for altera_spi_txrx() spi: stm32: FIFO threshold level - fix align packet size spi: spi-geni-qcom: Print an error when we timeout setting the CS spi: spi-geni-qcom: Don't try to set CS if an xfer is pending spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case
2021-01-07Merge tag 'regulator-fix-v5.11-rc2' of ↵Linus Torvalds6-5/+70
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few minor driver specific fixes, mostly DT bindings document bits, plus a new device ID" * tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: add QCOM_COMMAND_DB dependency regulator: qcom-rpmh-regulator: correct hfsmps515 definition dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revision regulator: bd718x7: Add enable times regulator: pf8x00: Use specific compatible strings for devices
2021-01-07Fonts: font_ter16x32: Update font with new upstream Terminus releaseAmanoel Dawod1-3/+3
This is just a maintenance patch to update font_ter16x32.c with changes and minor fixes added in new upstream Terminus v4.49. >From release notes of new version 4.49, this brings: - Altered ascii grave in some sizes to be more useful as a back quote. - Fixed 21B5, added 21B2 and 21B3. Just as my initial submission of the font, above changes were obtained from new ter-i32b.psf font source. Terminus font sources are available for download at SourceForge: https://sourceforge.net/projects/terminus-font/files/terminus-font-4.49/ Simply running `make` in source directory will build the .psf font files. Signed-off-by: Amanoel Dawod <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-07tools: selftests: add test for changing routes with PTMU exceptionsSean Tranchetti1-2/+69
Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change. These tests explicitly test for a recently discovered problem in the IPv6 routing framework where PMTU exceptions were not properly released when replacing a route via "ip route change ...". After creating PMTU exceptions, the route from the device A to R1 will be replaced with a new route, then device A will be deleted. If the PMTU exceptions were properly cleaned up by the kernel, this device deletion will succeed. Otherwise, the unregistration of the device will stall, and messages such as the following will be logged in dmesg: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4 Signed-off-by: Sean Tranchetti <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07net: ipv6: fib: flush exceptions when purging routeSean Tranchetti1-3/+2
Route removal is handled by two code paths. The main removal path is via fib6_del_route() which will handle purging any PMTU exceptions from the cache, removing all per-cpu copies of the DST entry used by the route, and releasing the fib6_info struct. The second removal location is during fib6_add_rt2node() during a route replacement operation. This path also calls fib6_purge_rt() to handle cleaning up the per-cpu copies of the DST entries and releasing the fib6_info associated with the older route, but it does not flush any PMTU exceptions that the older route had. Since the older route is removed from the tree during the replacement, we lose any way of accessing it again. As these lingering DSTs and the fib6_info struct are holding references to the underlying netdevice struct as well, unregistering that device from the kernel can never complete. Fixes: 2b760fcf5cfb3 ("ipv6: hook up exception table to store dst cache") Signed-off-by: Sean Tranchetti <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07Merge tag 'regmap-fix-v5.11-rc2' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "A couple of small fixes for leaks when attaching a device to a preexisting regmap" * tag 'regmap-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init() regmap: debugfs: Fix a memory leak when calling regmap_attach_dev
2021-01-07misc: pvpanic: Check devm_ioport_map() for NULLAndy Shevchenko1-4/+15
Inconveniently devm_ioport_map() and devm_ioremap_resource() return errors differently, i.e. former uses simply NULL pointer, while the latter an error pointer. Due to this, we have to check each of them separately. Fixes: f104060813fe ("misc: pvpanic: Combine ACPI and platform drivers") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-07Merge tag 'linux-can-fixes-for-5.11-20210107' of ↵Jakub Kicinski5-40/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-01-07 The first patch is by me for the m_can driver and removes an erroneous m_can_clk_stop() from the driver's unregister function. The second patch targets the tcan4x5x driver, is by me, and fixes the bit timing constant parameters. The next two patches are by me, target the mcp251xfd driver, and fix a race condition in the optimized TEF path (which was added in net-next for v5.11). The similar code in the RX path is changed to look the same, although it doesn't suffer from the race condition. A patch by Lad Prabhakar updates the description and help text for the rcar CAN driver to reflect all supported SoCs. In the last patch Sriram Dash transfers the maintainership of the m_can driver to Pankaj Sharma. * tag 'linux-can-fixes-for-5.11-20210107' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: MAINTAINERS: Update MCAN MMIO device driver maintainer can: rcar: Kconfig: update help description for CAN_RCAR config can: mcp251xfd: mcp251xfd_handle_rxif_ring(): first increment RX tail pointer in HW, then in driver can: mcp251xfd: mcp251xfd_handle_tefif(): fix TEF vs. TX race condition can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver can: m_can: m_can_class_unregister(): remove erroneous m_can_clk_stop() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07Merge tag 'nvme-5.11-2021-01-07' of git://git.infradead.org/nvme into block-5.11Jens Axboe7-21/+50
Pull NVMe updates from Christoph: "nvme updates for 5.11: - fix a race in the nvme-tcp send code (Sagi Grimberg) - fix a list corruption in an nvme-rdma error path (Israel Rukshin) - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar) - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari) - fix two compiler warnings in nvme-fcloop (James Smart) - don't call sleeping functions from irq context in nvme-fc (James Smart) - remove an unused argument (Max Gurtovoy) - remove unused exports (Minwoo Im)" * tag 'nvme-5.11-2021-01-07' of git://git.infradead.org/nvme: nvme: remove the unused status argument from nvme_trace_bio_complete nvmet-rdma: Fix list_del corruption on queue establishment failure nvme: unexport functions with no external caller nvme: avoid possible double fetch in handling CQE nvme-tcp: Fix possible race of io_work and direct send nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context
2021-01-07Merge tag 'asoc-fix-v5.11-rc2' of ↵Takashi Iwai11256-218791/+792332
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.11 A collection of mostly driver specific fixes, plus a maintainership update for TI and a fix for DAPM driver removal paths.
2021-01-07drm/msm: Only enable A6xx LLCC code on A6xxKonrad Dybcio2-9/+17
Using this code on A5xx (and probably older too) causes a smmu bug. Fixes: 474dadb8b0d5 ("drm/msm/a6xx: Add support for using system cache(LLC)") Signed-off-by: Konrad Dybcio <[email protected]> Tested-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Jordan Crouse <[email protected]> Reviewed-by: Sai Prakash Ranjan <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-01-07cpufreq: intel_pstate: remove obsolete functionsLukas Bulwahn1-10/+0
percent_fp() was used in intel_pstate_pid_reset(), which was removed in commit 9d0ef7af1f2d ("cpufreq: intel_pstate: Do not use PID-based P-state selection") and hence, percent_fp() is unused since then. percent_ext_fp() was last used in intel_pstate_update_perf_limits(), which was refactored in commit 1a4fe38add8b ("cpufreq: intel_pstate: Remove max/min fractions to limit performance"), and hence, percent_ext_fp() is unused since then. make CC=clang W=1 points us those unused functions: drivers/cpufreq/intel_pstate.c:79:23: warning: unused function 'percent_fp' [-Wunused-function] static inline int32_t percent_fp(int percent) ^ drivers/cpufreq/intel_pstate.c:94:23: warning: unused function 'percent_ext_fp' [-Wunused-function] static inline int32_t percent_ext_fp(int percent) ^ Remove those obsolete functions. Signed-off-by: Lukas Bulwahn <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-07drm/msm: Add modparam to allow vram carveoutIskren Chernev5-6/+17
Using the GPU with a VRAM Carveout is a security vulnerability. Nevertheless it is sometimes required, especially when no IOMMU implementation is available for a certain platform. Signed-off-by: Iskren Chernev <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-01-07drm/msm: Call msm_init_vram before binding the gpuCraig Tatlor1-4/+4
vram.size is needed when binding a gpu without an iommu and is defined in msm_init_vram(), so run that before binding it. Signed-off-by: Craig Tatlor <[email protected]> Reviewed-by: Brian Masney <[email protected]> Tested-by: Alexey Minnekhanov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-01-07drm/msm/dp: postpone irq_hpd event during connection pending stateKuogee Hsieh2-3/+16
irq_hpd event can only be executed at connected state. Therefore irq_hpd event should be postponed if it happened at connection pending state. This patch also make sure both link rate and lane are valid before start link training. Signed-off-by: Kuogee Hsieh <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2021-01-07device property: add description of fwnode casesBard Liao1-0/+7
There are only four valid fwnode cases which are - primary --> secondary --> -ENODEV - primary --> NULL - secondary --> -ENODEV - NULL dev->fwnode should be converted between the 4 cases above no matter how/when set_primary_fwnode() and set_secondary_fwnode() are called. Describe it in the code so people will keep it in mind. Signed-off-by: Bard Liao <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> [ rjw: Comment edit ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-07Revert "device property: Keep secondary firmware node secondary by type"Bard Liao1-1/+1
While commit d5dcce0c414f ("device property: Keep secondary firmware node secondary by type") describes everything correct in its commit message, the change it made does the opposite and original commit c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") was fully correct. Revert the former one here and improve documentation in the next patch. Fixes: d5dcce0c414f ("device property: Keep secondary firmware node secondary by type") Signed-off-by: Bard Liao <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Cc: 5.10+ <[email protected]> # 5.10+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-07ACPI: Update Kconfig help text for items that are no longer modularPeter Robinson1-6/+0
The CONTAINER and HOTPLUG_MEMORY options mention modules but are bool only, so if selected are always built in. Drop the help text about modules. Signed-off-by: Peter Robinson <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-07ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPIShawn Guo1-0/+7
It adds a stub acpi_create_platform_device() for !CONFIG_ACPI build, so that caller doesn't have to deal with !CONFIG_ACPI build issue. Reported-by: kernel test robot <[email protected]> Signed-off-by: Shawn Guo <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-07ACPI: PM: s2idle: Drop unused local variables and related codeRafael J. Wysocki1-13/+1
Two local variables in drivers/acpi/x86/s2idle.c are never read, so drop them along with the code updating their values (in vain). Fixes: fef98671194b ("ACPI: PM: s2idle: Move x86-specific code to the x86 directory") Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-07cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get()Colin Ian King1-6/+3
Currently there is an unlikely case where cpufreq_cpu_get() returns a NULL policy and this will cause a NULL pointer dereference later on. Fix this by passing the policy to transition_frequency_fidvid() from the caller and hence eliminating the need for the cpufreq_cpu_get() and cpufreq_cpu_put(). Thanks to Viresh Kumar for suggesting the fix. Addresses-Coverity: ("Dereference null return") Fixes: b43a7ffbf33b ("cpufreq: Notify all policy->cpus in cpufreq_notify_transition()") Suggested-by: Viresh Kumar <[email protected]> Signed-off-by: Colin Ian King <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-07cpufreq: intel_pstate: Use HWP capabilities in intel_cpufreq_adjust_perf()Rafael J. Wysocki1-2/+3
If turbo P-states cannot be used, either due to the configuration of the processor, or because intel_pstate is not allowed to used them, the maximum available P-state with HWP enabled corresponds to the HWP_CAP.GUARANTEED value which is not static. It can be adjusted by an out-of-band agent or during an Intel Speed Select performance level change, so long as it remains less than or equal to HWP_CAP.MAX. However, if turbo P-states cannot be used, intel_cpufreq_adjust_perf() always uses pstate.max_pstate (set during the initialization of the driver only) as the maximum available P-state, so it may miss a change of the HWP_CAP.GUARANTEED value. Prevent that from happening by modifyig intel_cpufreq_adjust_perf() to always read the "guaranteed" and "maximum turbo" performance levels from the cached HWP_CAP value. Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Srinivas Pandruvada <[email protected]>
2021-01-07fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sbSatya Tangirala1-0/+2
freeze/thaw_bdev() currently use bdev->bd_fsfreeze_count to infer whether or not bdev->bd_fsfreeze_sb is valid (it's valid iff bd_fsfreeze_count is non-zero). thaw_bdev() doesn't nullify bd_fsfreeze_sb. But this means a freeze_bdev() call followed by a thaw_bdev() call can leave bd_fsfreeze_sb with a non-null value, while bd_fsfreeze_count is zero. If freeze_bdev() is called again, and this time get_active_super() returns NULL (e.g. because the FS is unmounted), we'll end up with bd_fsfreeze_count > 0, but bd_fsfreeze_sb is *untouched* - it stays the same (now garbage) value. A subsequent thaw_bdev() will decide that the bd_fsfreeze_sb value is legitimate (since bd_fsfreeze_count > 0), and attempt to use it. Fix this by always setting bd_fsfreeze_sb to NULL when bd_fsfreeze_count is successfully decremented to 0 in thaw_sb(). Alternatively, we could set bd_fsfreeze_sb to whatever get_active_super() returns in freeze_bdev() whenever bd_fsfreeze_count is successfully incremented to 1 from 0 (which can be achieved cleanly by moving the line currently setting bd_fsfreeze_sb to immediately after the "sync:" label, but it might be a little too subtle/easily overlooked in future). This fixes the currently panicking xfstests generic/085. Fixes: 040f04bd2e82 ("fs: simplify freeze_bdev/thaw_bdev") Signed-off-by: Satya Tangirala <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-07btrfs: reloc: fix wrong file extent type check to avoid false ENOENTQu Wenruo1-1/+6
[BUG] There are several bug reports about recent kernel unable to relocate certain data block groups. Sometimes the error just goes away, but there is one reporter who can reproduce it reliably. The dmesg would look like: [438.260483] BTRFS info (device dm-10): balance: start -dvrange=34625344765952..34625344765953 [438.269018] BTRFS info (device dm-10): relocating block group 34625344765952 flags data|raid1 [450.439609] BTRFS info (device dm-10): found 167 extents, stage: move data extents [463.501781] BTRFS info (device dm-10): balance: ended with status: -2 [CAUSE] The ENOENT error is returned from the following call chain: add_data_references() |- delete_v1_space_cache(); |- if (!found) return -ENOENT; The variable @found is set to true if we find a data extent whose disk bytenr matches parameter @data_bytes. With extra debugging, the offending tree block looks like this: leaf bytenr = 42676709441536, data_bytenr = 34626327621632 ctime 1567904822.739884119 (2019-09-08 03:07:02) mtime 0.0 (1970-01-01 01:00:00) otime 0.0 (1970-01-01 01:00:00) item 27 key (51933 EXTENT_DATA 0) itemoff 9854 itemsize 53 generation 1517381 type 2 (prealloc) prealloc data disk byte 34626327621632 nr 262144 <<< prealloc data offset 0 nr 262144 item 28 key (52262 ROOT_ITEM 0) itemoff 9415 itemsize 439 generation 2618893 root_dirid 256 bytenr 42677048360960 level 3 refs 1 lastsnap 2618893 byte_limit 0 bytes_used 5557338112 flags 0x0(none) uuid d0d4361f-d231-6d40-8901-fe506e4b2b53 Although item 27 has disk bytenr 34626327621632, which matches the data_bytenr, its type is prealloc, not reg. This makes the existing code skip that item, and return ENOENT. [FIX] The code is modified in commit 19b546d7a1b2 ("btrfs: relocation: Use btrfs_find_all_leafs to locate data extent parent tree leaves"), before that commit, we use something like "if (type == BTRFS_FILE_EXTENT_INLINE) continue;" But in that offending commit, we use (type == BTRFS_FILE_EXTENT_REG), ignoring BTRFS_FILE_EXTENT_PREALLOC. Fix it by also checking BTRFS_FILE_EXTENT_PREALLOC. Reported-by: Stéphane Lesimple <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected] Fixes: 19b546d7a1b2 ("btrfs: relocation: Use btrfs_find_all_leafs to locate data extent parent tree leaves") CC: [email protected] # 5.6+ Tested-By: Stéphane Lesimple <[email protected]> Reviewed-by: Su Yue <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-01-07btrfs: tree-checker: check if chunk item end overflowsSu Yue1-0/+7
While mounting a crafted image provided by user, kernel panics due to the invalid chunk item whose end is less than start. [66.387422] loop: module loaded [66.389773] loop0: detected capacity change from 262144 to 0 [66.427708] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 12 /dev/loop0 scanned by mount (613) [66.431061] BTRFS info (device loop0): disk space caching is enabled [66.431078] BTRFS info (device loop0): has skinny extents [66.437101] BTRFS error: insert state: end < start 29360127 37748736 [66.437136] ------------[ cut here ]------------ [66.437140] WARNING: CPU: 16 PID: 613 at fs/btrfs/extent_io.c:557 insert_state.cold+0x1a/0x46 [btrfs] [66.437369] CPU: 16 PID: 613 Comm: mount Tainted: G O 5.11.0-rc1-custom #45 [66.437374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.437378] RIP: 0010:insert_state.cold+0x1a/0x46 [btrfs] [66.437420] RSP: 0018:ffff93e5414c3908 EFLAGS: 00010286 [66.437427] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.437431] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.437434] RBP: ffff93e5414c3938 R08: 0000000000000001 R09: 0000000000000001 [66.437438] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d72aa0 [66.437441] R13: ffff8ec78bc71628 R14: 0000000000000000 R15: 0000000002400000 [66.437447] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.437451] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.437455] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.437460] PKRU: 55555554 [66.437464] Call Trace: [66.437475] set_extent_bit+0x652/0x740 [btrfs] [66.437539] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.437576] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.437621] read_one_chunk+0x33c/0x420 [btrfs] [66.437674] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.437708] ? kvm_sched_clock_read+0x18/0x40 [66.437739] open_ctree+0xb32/0x1734 [btrfs] [66.437781] ? bdi_register_va+0x1b/0x20 [66.437788] ? super_setup_bdi_name+0x79/0xd0 [66.437810] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.437854] ? __kmalloc_track_caller+0x217/0x3b0 [66.437873] legacy_get_tree+0x34/0x60 [66.437880] vfs_get_tree+0x2d/0xc0 [66.437888] vfs_kern_mount.part.0+0x78/0xc0 [66.437897] vfs_kern_mount+0x13/0x20 [66.437902] btrfs_mount+0x11f/0x3c0 [btrfs] [66.437940] ? kfree+0x5ff/0x670 [66.437944] ? __kmalloc_track_caller+0x217/0x3b0 [66.437962] legacy_get_tree+0x34/0x60 [66.437974] vfs_get_tree+0x2d/0xc0 [66.437983] path_mount+0x48c/0xd30 [66.437998] __x64_sys_mount+0x108/0x140 [66.438011] do_syscall_64+0x38/0x50 [66.438018] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.438023] RIP: 0033:0x7f0138827f6e [66.438033] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.438040] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.438044] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [66.438047] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [66.438050] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [66.438054] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [66.438078] irq event stamp: 18169 [66.438082] hardirqs last enabled at (18175): [<ffffffffb81154bf>] console_unlock+0x4ff/0x5f0 [66.438088] hardirqs last disabled at (18180): [<ffffffffb8115427>] console_unlock+0x467/0x5f0 [66.438092] softirqs last enabled at (16910): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20 [66.438097] softirqs last disabled at (16905): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20 [66.438103] ---[ end trace e114b111db64298b ]--- [66.438107] BTRFS error: found node 12582912 29360127 on insert of 37748736 29360127 [66.438127] BTRFS critical: panic in extent_io_tree_panic:679: locking error: extent tree was modified by another thread while locked (errno=-17 Object already exists) [66.441069] ------------[ cut here ]------------ [66.441072] kernel BUG at fs/btrfs/extent_io.c:679! [66.442064] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [66.443018] CPU: 16 PID: 613 Comm: mount Tainted: G W O 5.11.0-rc1-custom #45 [66.444538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.446223] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [66.450878] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [66.451840] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.453141] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.454445] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [66.455743] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [66.457055] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [66.458356] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.459841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.460895] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.462196] PKRU: 55555554 [66.462692] Call Trace: [66.463139] set_extent_bit.cold+0x30/0x98 [btrfs] [66.464049] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.490466] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.514097] read_one_chunk+0x33c/0x420 [btrfs] [66.534976] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.555718] ? kvm_sched_clock_read+0x18/0x40 [66.575758] open_ctree+0xb32/0x1734 [btrfs] [66.595272] ? bdi_register_va+0x1b/0x20 [66.614638] ? super_setup_bdi_name+0x79/0xd0 [66.633809] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.652938] ? __kmalloc_track_caller+0x217/0x3b0 [66.671925] legacy_get_tree+0x34/0x60 [66.690300] vfs_get_tree+0x2d/0xc0 [66.708221] vfs_kern_mount.part.0+0x78/0xc0 [66.725808] vfs_kern_mount+0x13/0x20 [66.742730] btrfs_mount+0x11f/0x3c0 [btrfs] [66.759350] ? kfree+0x5ff/0x670 [66.775441] ? __kmalloc_track_caller+0x217/0x3b0 [66.791750] legacy_get_tree+0x34/0x60 [66.807494] vfs_get_tree+0x2d/0xc0 [66.823349] path_mount+0x48c/0xd30 [66.838753] __x64_sys_mount+0x108/0x140 [66.854412] do_syscall_64+0x38/0x50 [66.869673] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.885093] RIP: 0033:0x7f0138827f6e [66.945613] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.977214] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.994266] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [67.011544] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [67.028836] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [67.045812] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [67.216138] ---[ end trace e114b111db64298c ]--- [67.237089] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [67.325317] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [67.347946] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [67.371343] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [67.394757] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [67.418409] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [67.441906] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [67.465436] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [67.511660] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [67.535047] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [67.558449] PKRU: 55555554 [67.581146] note: mount[613] exited with preempt_count 2 The image has a chunk item which has a logical start 37748736 and length 18446744073701163008 (-8M). The calculated end 29360127 overflows. EEXIST was caught by insert_state() because of the duplicate end and extent_io_tree_panic() was called. Add overflow check of chunk item end to tree checker so it can be detected early at mount time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 CC: [email protected] # 4.19+ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-01-07btrfs: prevent NULL pointer dereference in extent_io_tree_panicSu Yue1-3/+1
Some extent io trees are initialized with NULL private member (e.g. btrfs_device::alloc_state and btrfs_fs_info::excluded_extents). Dereference of a NULL tree->private as inode pointer will cause panic. Pass tree->fs_info as it's known to be valid in all cases. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 Fixes: 05912a3c04eb ("btrfs: drop extent_io_ops::tree_fs_info callback") CC: [email protected] # 4.19+ Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-01-07btrfs: print the actual offset in btrfs_root_nameJosef Bacik3-7/+7
We're supposed to print the root_key.offset in btrfs_root_name in the case of a reloc root, not the objectid. Fix this helper to take the key so we have access to the offset when we need it. Fixes: 457f1864b569 ("btrfs: pretty print leaked root name") Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Nikolay Borisov <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-01-07io_uring: synchronise ev_posted() with waitqueuesPavel Begunkov1-2/+8
waitqueue_active() needs smp_mb() to be in sync with waitqueues modification, but we miss it in io_cqring_ev_posted*() apart from cq_wait() case. Take an smb_mb() out of wq_has_sleeper() making it waitqueue_active(), and place it a few lines before, so it can synchronise other waitqueue_active() as well. The patch doesn't add any additional overhead, so even if there are no problems currently, it's just safer to have it this way. Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-07io_uring: dont kill fasync under completion_lockPavel Begunkov1-5/+8
CPU0 CPU1 ---- ---- lock(&new->fa_lock); local_irq_disable(); lock(&ctx->completion_lock); lock(&new->fa_lock); <Interrupt> lock(&ctx->completion_lock); *** DEADLOCK *** Move kill_fasync() out of io_commit_cqring() to io_cqring_ev_posted(), so it doesn't hold completion_lock while doing it. That saves from the reported deadlock, and it's just nice to shorten the locking time and untangle nested locks (compl_lock -> wq_head::lock). Reported-by: [email protected] Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-07io_uring: trigger eventfd for IOPOLLPavel Begunkov1-2/+11
Make sure io_iopoll_complete() tries to wake up eventfd, which currently is skipped together with io_cqring_ev_posted() for non-SQPOLL IOPOLL. Add an iopoll version of io_cqring_ev_posted(), duplicates a bit of code, but they actually use different sets of wait queues may be for better. Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-07iommu/vt-d: Fix ineffective devTLB invalidation for subdevicesLiu Yi L1-16/+37
iommu_flush_dev_iotlb() is called to invalidate caches on a device but only loops over the devices which are fully-attached to the domain. For sub-devices, this is ineffective and can result in invalid caching entries left on the device. Fix the missing invalidation by adding a loop over the subdevices and ensuring that 'domain->has_iotlb_device' is updated when attaching to subdevices. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Signed-off-by: Liu Yi L <[email protected]> Acked-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-01-07iommu/vt-d: Fix general protection fault in aux_detach_device()Liu Yi L2-29/+82
The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <[email protected]> Signed-off-by: Xin Zeng <[email protected]> Signed-off-by: Liu Yi L <[email protected]> Acked-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-01-07iommu/vt-d: Move intel_iommu info from struct intel_svm to struct intel_svm_devLiu Yi L2-5/+6
'struct intel_svm' is shared by all devices bound to a give process, but records only a single pointer to a 'struct intel_iommu'. Consequently, cache invalidations may only be applied to a single DMAR unit, and are erroneously skipped for the other devices. In preparation for fixing this, rework the structures so that the iommu pointer resides in 'struct intel_svm_dev', allowing 'struct intel_svm' to track them in its device list. Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode") Cc: Lu Baolu <[email protected]> Cc: Jacob Pan <[email protected]> Cc: Raj Ashok <[email protected]> Cc: David Woodhouse <[email protected]> Reported-by: Guo Kaijie <[email protected]> Reported-by: Xin Zeng <[email protected]> Signed-off-by: Guo Kaijie <[email protected]> Signed-off-by: Xin Zeng <[email protected]> Signed-off-by: Liu Yi L <[email protected]> Tested-by: Guo Kaijie <[email protected]> Cc: [email protected] # v5.0+ Acked-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-01-07iommu/arm-smmu-qcom: Initialize SCTLR of the bypass contextBjorn Andersson1-0/+2
On SM8150 it's occasionally observed that the boot hangs in between the writing of SMEs and context banks in arm_smmu_device_reset(). The problem seems to coincide with a display refresh happening after updating the stream mapping, but before clearing - and there by disabling translation - the context bank picked to emulate translation bypass. Resolve this by explicitly disabling the bypass context already in cfg_probe. Fixes: f9081b8ff593 ("iommu/arm-smmu-qcom: Implement S2CR quirk") Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-01-07iommu/vt-d: Fix lockdep splat in sva bind()/unbind()Lu Baolu1-6/+8
Lock(&iommu->lock) without disabling irq causes lockdep warnings. ======================================================== WARNING: possible irq lock inversion dependency detected 5.11.0-rc1+ #828 Not tainted -------------------------------------------------------- kworker/0:1H/120 just changed the state of lock: ffffffffad9ea1b8 (device_domain_lock){..-.}-{2:2}, at: iommu_flush_dev_iotlb.part.0+0x32/0x120 but this lock took another, SOFTIRQ-unsafe lock in the past: (&iommu->lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&iommu->lock); local_irq_disable(); lock(device_domain_lock); lock(&iommu->lock); <Interrupt> lock(device_domain_lock); *** DEADLOCK *** Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-01-07Revert "iommu: Add quirk for Intel graphic devices in map_sg"Lu Baolu1-27/+0
This reverts commit 65f746e8285f0a67d43517d86fedb9e29ead49f2. As commit 8a473dbadccf ("drm/i915: Fix DMA mapped scatterlist walks") and commit 934941ed5a30 ("drm/i915: Fix DMA mapped scatterlist lookup") fixed the DMA scatterlist limitations in the i915 driver, remove this temporary workaround. Cc: Tvrtko Ursulin <[email protected]> Cc: Tom Murphy <[email protected]> Cc: Logan Gunthorpe <[email protected]> Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-01-07iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb()Lu Baolu1-2/+2
Use IS_ALIGNED() instead. Otherwise, an unaligned address will be ignored. Fixes: 33cd6e642d6a ("iommu/vt-d: Flush PASID-based iotlb for iova over first level") Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-01-07drm/ttm: unexport ttm_pool_init/finiChristian König1-2/+0
Drivers are not supposed to use this directly any more. Signed-off-by: Christian König <[email protected]> Reviewed-by: Huang Rui <[email protected]> Link: https://patchwork.freedesktop.org/patch/412156/
2021-01-07drm/radeon: stop re-init the TTM page poolChristian König1-3/+0
Drivers are not supposed to init the page pool directly any more. Signed-off-by: Christian König <[email protected]> Reviewed-by: Huang Rui <[email protected]> Link: https://patchwork.freedesktop.org/patch/412153/
2021-01-07usb: dwc3: gadget: Clear wait flag on dequeueThinh Nguyen1-0/+2
If an active transfer is dequeued, then the endpoint is freed to start a new transfer. Make sure to clear the endpoint's transfer wait flag for this case. Fixes: e0d19563eb6c ("usb: dwc3: gadget: Wait for transfer completion") Cc: [email protected] Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/b81cd5b5281cfbfdadb002c4bcf5c9be7c017cfd.1609828485.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-07usb: typec: Send uevent for num_altmodes updatePrashant Malani1-0/+2
Generate a change uevent when the "number_of_alternate_modes" sysfs file for partners and plugs is updated by a port driver. Cc: Heikki Krogerus <[email protected]> Cc: Benson Leung <[email protected]> Signed-off-by: Prashant Malani <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.