aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-03f2fs: show compression in statxChao Yu1-1/+4
fstest reports below message when compression is on: generic/424 1s ... - output mismatch --- tests/generic/424.out +++ results/generic/424.out.bad @@ -1,2 +1,26 @@ QA output created by 424 +[!] Attribute compressed should be set +Failed +stat_test failed +[!] Attribute compressed should be set +Failed +stat_test failed We missed to set STATX_ATTR_COMPRESSED on compressed inode in getattr(), fix it. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2020-04-03f2fs: clean up dic->tpages assignmentChao Yu1-7/+3
Just cleanup, no logic change. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2020-04-03f2fs: compress: support zstd compress algorithmChao Yu6-3/+190
Add zstd compress algorithm support, use "compress_algorithm=zstd" mountoption to enable it. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2020-04-03dm integrity: fix logic bug in integrity tag testingMikulas Patocka1-1/+1
If all the bytes are equal to DISCARD_FILLER, we want to accept the buffer. If any of the bytes are different, we must do thorough tag-by-tag checking. The condition was inverted. Fixes: 84597a44a9d8 ("dm integrity: add optional discard support") Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-04-03docs: cgroup-v1: Document the cpuset_v2_mode mount optionWaiman Long2-2/+17
The cpuset in cgroup v1 accepts a special "cpuset_v2_mode" mount option that make cpuset.cpus and cpuset.mems behave more like those in cgroup v2. Document it to make other people more aware of this feature that can be useful in some circumstances. Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2020-04-03Revert "dm: always call blk_queue_split() in dm_process_bio()"Mike Snitzer1-2/+3
This reverts commit effd58c95f277744f75d6e08819ac859dbcbd351. blk_queue_split() is causing excessive IO splitting -- because blk_max_size_offset() depends on 'chunk_sectors' limit being set and if it isn't (as is the case for DM targets!) it falls back to splitting on a 'max_sectors' boundary regardless of offset. "Fix" this by reverting back to _not_ using blk_queue_split() in dm_process_bio() for normal IO (reads and writes). Long-term fix is still TBD but it should focus on training blk_max_size_offset() to call into a DM provided hook (to call DM's max_io_len()). Test results from simple misaligned IO test on 4-way dm-striped device with chunksize of 128K and stripesize of 512K: xfs_io -d -c 'pread -b 2m 224s 4072s' /dev/mapper/stripe_dev before this revert: 253,0 21 1 0.000000000 2206 Q R 224 + 4072 [xfs_io] 253,0 21 2 0.000008267 2206 X R 224 / 480 [xfs_io] 253,0 21 3 0.000010530 2206 X R 224 / 256 [xfs_io] 253,0 21 4 0.000027022 2206 X R 480 / 736 [xfs_io] 253,0 21 5 0.000028751 2206 X R 480 / 512 [xfs_io] 253,0 21 6 0.000033323 2206 X R 736 / 992 [xfs_io] 253,0 21 7 0.000035130 2206 X R 736 / 768 [xfs_io] 253,0 21 8 0.000039146 2206 X R 992 / 1248 [xfs_io] 253,0 21 9 0.000040734 2206 X R 992 / 1024 [xfs_io] 253,0 21 10 0.000044694 2206 X R 1248 / 1504 [xfs_io] 253,0 21 11 0.000046422 2206 X R 1248 / 1280 [xfs_io] 253,0 21 12 0.000050376 2206 X R 1504 / 1760 [xfs_io] 253,0 21 13 0.000051974 2206 X R 1504 / 1536 [xfs_io] 253,0 21 14 0.000055881 2206 X R 1760 / 2016 [xfs_io] 253,0 21 15 0.000057462 2206 X R 1760 / 1792 [xfs_io] 253,0 21 16 0.000060999 2206 X R 2016 / 2272 [xfs_io] 253,0 21 17 0.000062489 2206 X R 2016 / 2048 [xfs_io] 253,0 21 18 0.000066133 2206 X R 2272 / 2528 [xfs_io] 253,0 21 19 0.000067507 2206 X R 2272 / 2304 [xfs_io] 253,0 21 20 0.000071136 2206 X R 2528 / 2784 [xfs_io] 253,0 21 21 0.000072764 2206 X R 2528 / 2560 [xfs_io] 253,0 21 22 0.000076185 2206 X R 2784 / 3040 [xfs_io] 253,0 21 23 0.000077486 2206 X R 2784 / 2816 [xfs_io] 253,0 21 24 0.000080885 2206 X R 3040 / 3296 [xfs_io] 253,0 21 25 0.000082316 2206 X R 3040 / 3072 [xfs_io] 253,0 21 26 0.000085788 2206 X R 3296 / 3552 [xfs_io] 253,0 21 27 0.000087096 2206 X R 3296 / 3328 [xfs_io] 253,0 21 28 0.000093469 2206 X R 3552 / 3808 [xfs_io] 253,0 21 29 0.000095186 2206 X R 3552 / 3584 [xfs_io] 253,0 21 30 0.000099228 2206 X R 3808 / 4064 [xfs_io] 253,0 21 31 0.000101062 2206 X R 3808 / 3840 [xfs_io] 253,0 21 32 0.000104956 2206 X R 4064 / 4096 [xfs_io] 253,0 21 33 0.001138823 0 C R 4096 + 200 [0] after this revert: 253,0 18 1 0.000000000 4430 Q R 224 + 3896 [xfs_io] 253,0 18 2 0.000018359 4430 X R 224 / 256 [xfs_io] 253,0 18 3 0.000028898 4430 X R 256 / 512 [xfs_io] 253,0 18 4 0.000033535 4430 X R 512 / 768 [xfs_io] 253,0 18 5 0.000065684 4430 X R 768 / 1024 [xfs_io] 253,0 18 6 0.000091695 4430 X R 1024 / 1280 [xfs_io] 253,0 18 7 0.000098494 4430 X R 1280 / 1536 [xfs_io] 253,0 18 8 0.000114069 4430 X R 1536 / 1792 [xfs_io] 253,0 18 9 0.000129483 4430 X R 1792 / 2048 [xfs_io] 253,0 18 10 0.000136759 4430 X R 2048 / 2304 [xfs_io] 253,0 18 11 0.000152412 4430 X R 2304 / 2560 [xfs_io] 253,0 18 12 0.000160758 4430 X R 2560 / 2816 [xfs_io] 253,0 18 13 0.000183385 4430 X R 2816 / 3072 [xfs_io] 253,0 18 14 0.000190797 4430 X R 3072 / 3328 [xfs_io] 253,0 18 15 0.000197667 4430 X R 3328 / 3584 [xfs_io] 253,0 18 16 0.000218751 4430 X R 3584 / 3840 [xfs_io] 253,0 18 17 0.000226005 4430 X R 3840 / 4096 [xfs_io] 253,0 18 18 0.000250404 4430 Q R 4120 + 176 [xfs_io] 253,0 18 19 0.000847708 0 C R 4096 + 24 [0] 253,0 18 20 0.000855783 0 C R 4120 + 176 [0] Fixes: effd58c95f27774 ("dm: always call blk_queue_split() in dm_process_bio()") Cc: [email protected] Reported-by: Andreas Gruenbacher <[email protected]> Tested-by: Barry Marson <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-04-03Revert "cpuset: Make cpuset hotplug synchronous"Tejun Heo3-19/+17
This reverts commit a49e4629b5ed ("cpuset: Make cpuset hotplug synchronous") as it may deadlock with cpu hotplug path. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Tejun Heo <[email protected]> Reported-by: Qian Cai <[email protected]> Cc: Prateek Sood <[email protected]>
2020-04-03tracing: Do not allocate buffer in trace_find_next_entry() in atomicSteven Rostedt (VMware)1-1/+20
When dumping out the trace data in latency format, a check is made to peek at the next event to compare its timestamp to the current one, and if the delta is of a greater size, it will add a marker showing so. But to do this, it needs to save the current event otherwise peeking at the next event will remove the current event. To save the event, a temp buffer is used, and if the event is bigger than the temp buffer, the temp buffer is freed and a bigger buffer is allocated. This allocation is a problem when called in atomic context. The only way this gets called via atomic context is via ftrace_dump(). Thus, use a static buffer of 128 bytes (which covers most events), and if the event is bigger than that, simply return NULL. The callers of trace_find_next_entry() need to handle a NULL case, as that's what would happen if the allocation failed. Link: https://lore.kernel.org/r/20200326091256.GR11705@shao2-debian Fixes: ff895103a84ab ("tracing: Save off entry when peeking at next entry") Reported-by: kernel test robot <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-04-03KVM: SVM: Split svm_vcpu_run inline assembly to separate fileUros Bizjak3-90/+166
The compiler (GCC) does not like the situation, where there is inline assembly block that clobbers all available machine registers in the middle of the function. This situation can be found in function svm_vcpu_run in file kvm/svm.c and results in many register spills and fills to/from stack frame. This patch fixes the issue with the same approach as was done for VMX some time ago. The big inline assembly is moved to a separate assembly .S file, taking into account all ABI requirements. There are two main benefits of the above approach: * elimination of several register spills and fills to/from stack frame, and consequently smaller function .text size. The binary size of svm_vcpu_run is lowered from 2019 to 1626 bytes. * more efficient access to a register save array. Currently, register save array is accessed as: 7b00: 48 8b 98 28 02 00 00 mov 0x228(%rax),%rbx 7b07: 48 8b 88 18 02 00 00 mov 0x218(%rax),%rcx 7b0e: 48 8b 90 20 02 00 00 mov 0x220(%rax),%rdx and passing ia pointer to a register array as an argument to a function one gets: 12: 48 8b 48 08 mov 0x8(%rax),%rcx 16: 48 8b 50 10 mov 0x10(%rax),%rdx 1a: 48 8b 58 18 mov 0x18(%rax),%rbx As a result, the total size, considering that the new function size is 229 bytes, gets lowered by 164 bytes. Signed-off-by: Uros Bizjak <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-04-03KVM: SVM: Move SEV code to separate fileJoerg Roedel4-1221/+1257
Move the SEV specific parts of svm.c into the new sev.c file. Signed-off-by: Joerg Roedel <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-04-03KVM: SVM: Move AVIC code to separate fileJoerg Roedel4-1050/+1091
Move the AVIC related functions from svm.c to the new avic.c file. Signed-off-by: Joerg Roedel <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-04-03KVM: SVM: Move Nested SVM Implementation to nested.cJoerg Roedel4-1145/+1216
Split out the code for the nested SVM implementation and move it to a separate file. Signed-off-by: Joerg Roedel <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-04-03kVM SVM: Move SVM related files to own sub-directoryJoerg Roedel3-1/+1
Move svm.c and pmu_amd.c into their own arch/x86/kvm/svm/ subdirectory. Signed-off-by: Joerg Roedel <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-04-03dm integrity: fix ppc64le warningMike Snitzer1-1/+1
Otherwise: In file included from drivers/md/dm-integrity.c:13: drivers/md/dm-integrity.c: In function 'dm_integrity_status': drivers/md/dm-integrity.c:3061:10: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Werror=format=] DMEMIT("%llu %llu", ^~~~~~~~~~~ atomic64_read(&ic->number_of_mismatches), ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/device-mapper.h:550:46: note: in definition of macro 'DMEMIT' 0 : scnprintf(result + sz, maxlen - sz, x)) ^ cc1: all warnings being treated as errors Fixes: 7649194a1636ab5 ("dm integrity: remove sector type casts") Signed-off-by: Mike Snitzer <[email protected]>
2020-04-03ASoC: Intel: atom: Fix uninitialized variable compiler warningHans de Goede1-1/+1
GCC 10 gives a "variable might be used uninitialized" warning for the block variable in sst_prepare_and_post_msg(). This is a false-positive warning, but lets fix it anyways. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-04-03ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlockedHans de Goede1-0/+2
sst_fill_and_send_cmd_unlocked must be called with the drv->lock mutex locked already. In the past there have been cases where this was not the case, add a WARN_ON to check for drv->lock being locked. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-04-03ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()Hans de Goede1-0/+2
sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some places it is called with the drv->lock mutex already held. So it must always be called with the mutex locked. This commit adds missing locking in the sst_set_be_modules() code-path. Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by: Hans de Goede <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-04-03ASoC: SOF: Turn "firmware boot complete" message into a dbg messageHans de Goede1-1/+1
Using a Canon Lake machine with the SOF driver causes dmesg to fill up with a ton of these messages: [ 275.902194] sof-audio-pci 0000:00:1f.3: firmware boot complete [ 351.529358] sof-audio-pci 0000:00:1f.3: firmware boot complete [ 560.049047] sof-audio-pci 0000:00:1f.3: firmware boot complete etc. Since the DSP is powered down when not in used this happens everytime e.g. a notification plays, polluting dmesg. Turn this messages into a debug message, matching what the code already does for the ""booting DSP firmware" message. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-04-03ipmi: kcs: aspeed: Implement v2 bindingsAndrew Jeffery1-23/+121
The v2 bindings allow us to extract the resources from the devicetree. The table in the driver is retained to derive the channel index, which removes the need for kcs_chan property from the v1 bindings. The v2 bindings allow us to reduce the number of warnings generated by the existing devicetree nodes. Signed-off-by: Andrew Jeffery <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Reviewed-by: Haiyue Wang <[email protected]> Message-Id: <01ef3787e9ddaa9d87cfd55a2ac793053b5a69de.1576462051.git-series.andrew@aj.id.au> Signed-off-by: Corey Minyard <[email protected]>
2020-04-03ipmi: kcs: Finish configuring ASPEED KCS device before enableAndrew Jeffery1-3/+4
The interrupts were configured after the channel was enabled. Configure them beforehand so they will work. Signed-off-by: Andrew Jeffery <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Reviewed-by: Haiyue Wang <[email protected]> Message-Id: <c0aba2c9dfe2d0525e9cefd37995983ead0ec242.1576462051.git-series.andrew@aj.id.au> Signed-off-by: Corey Minyard <[email protected]>
2020-04-03dt-bindings: ipmi: aspeed: Introduce a v2 binding for KCSAndrew Jeffery1-6/+14
The v2 binding utilises reg and renames some of the v1 properties. Signed-off-by: Andrew Jeffery <[email protected]> Message-Id: <8aec8994bbe1186d257b0a712e13cf914c5ebe35.1576462051.git-series.andrew@aj.id.au> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2020-04-03perf python: Fix clang detection to strip out options passed in $CCArnaldo Carvalho de Melo1-1/+1
The clang check in the python setup.py file expected $CC to be just the name of the compiler, not the compiler + options, i.e. all options were expected to be passed in $CFLAGS, this ends up making it fail in systems where CC is set to, e.g.: "aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot" Like this: $ python3 >>> from subprocess import Popen >>> a = Popen(["aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot", "-v"]) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python3.6/subprocess.py", line 729, in __init__ restore_signals, start_new_session) File "/usr/lib/python3.6/subprocess.py", line 1364, in _execute_child raise child_exception_type(errno_num, err_msg, err_filename) FileNotFoundError: [Errno 2] No such file or directory: 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot': 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot' >>> Make it more robust, covering this case, by passing cc.split()[0] as the first arg to popen(). Fixes: a7ffd416d804 ("perf python: Fix clang detection when using CC=clang-version") Reported-by: Daniel Díaz <[email protected]> Reported-by: Naresh Kamboju <[email protected]> Tested-by: Daniel Díaz <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ilie Halip <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf tools: Support Python 3.8+ in MakefileSam Lunt1-1/+10
Python 3.8 changed the output of 'python-config --ldflags' to no longer include the '-lpythonX.Y' flag (this apparently fixed an issue loading modules with a statically linked Python executable). The libpython feature check in linux/build/feature fails if the Python library is not included in FEATURE_CHECK_LDFLAGS-libpython variable. This adds a check in the Makefile to determine if PYTHON_CONFIG accepts the '--embed' flag and passes that flag alongside '--ldflags' if so. tools/perf is the only place the libpython feature check is used. Signed-off-by: Sam Lunt <[email protected]> Tested-by: He Zhe <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf script: Fix invalid read of directory entry after closedir()Andreas Gerstmayr1-1/+1
closedir(lang_dir) frees the memory of script_dirent->d_name, which gets accessed in the next line in a call to scnprintf(). Valgrind report: Invalid read of size 1 ==413557== at 0x483CBE6: strlen (vg_replace_strmem.c:461) ==413557== by 0x4DD45FD: __vfprintf_internal (vfprintf-internal.c:1688) ==413557== by 0x4DE6679: __vsnprintf_internal (vsnprintf.c:114) ==413557== by 0x53A037: vsnprintf (stdio2.h:80) ==413557== by 0x53A037: scnprintf (vsprintf.c:21) ==413557== by 0x435202: get_script_path (builtin-script.c:3223) ==413557== Address 0x52e7313 is 1,139 bytes inside a block of size 32,816 free'd ==413557== at 0x483AA0C: free (vg_replace_malloc.c:540) ==413557== by 0x4E303C0: closedir (closedir.c:50) ==413557== by 0x4351DC: get_script_path (builtin-script.c:3222) Signed-off-by: Andreas Gerstmayr <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03ipmi: fix hung processes in __get_guid()Wen Yang1-2/+2
The wait_event() function is used to detect command completion. When send_guid_cmd() returns an error, smi_send() has not been called to send data. Therefore, wait_event() should not be used on the error path, otherwise it will cause the following warning: [ 1361.588808] systemd-udevd D 0 1501 1436 0x00000004 [ 1361.588813] ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40 [ 1361.677952] ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010 [ 1361.767077] 00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000 [ 1361.856199] Call Trace: [ 1361.885578] [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780 [ 1361.951406] [<ffffffff8173cfb6>] schedule+0x36/0x80 [ 1362.010979] [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler] [ 1362.091281] [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100 [ 1362.168533] [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler] [ 1362.258337] [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si] [ 1362.334521] [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si] [ 1362.411701] [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si] [ 1362.487917] [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si] [ 1362.568219] [<ffffffff810021a0>] do_one_initcall+0x50/0x180 [ 1362.636109] [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190 [ 1362.714330] [<ffffffff811b2ae1>] do_init_module+0x5f/0x200 [ 1362.781208] [<ffffffff81123ca8>] load_module+0x1898/0x1de0 [ 1362.848069] [<ffffffff811202e0>] ? __symbol_put+0x60/0x60 [ 1362.913886] [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80 [ 1362.998514] [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120 [ 1363.068463] [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120 [ 1363.140513] [<ffffffff811244be>] SyS_finit_module+0xe/0x10 [ 1363.207364] [<ffffffff81003c04>] do_syscall_64+0x74/0x180 Fixes: 50c812b2b951 ("[PATCH] ipmi: add full sysfs support") Signed-off-by: Wen Yang <[email protected]> Cc: Corey Minyard <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] # 2.6.17- Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2020-04-03perf script report: Fix SEGFAULT when using DWARF modeAndreas Gerstmayr1-0/+3
When running perf script report with a Python script and a callgraph in DWARF mode, intr_regs->regs can be 0 and therefore crashing the regs_map function. Added a check for this condition (same check as in builtin-script.c:595). Signed-off-by: Andreas Gerstmayr <[email protected]> Tested-by: Kim Phillips <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf script: add -S/--symbols documentationIan Rogers1-0/+8
Capture both that this option exists and that symbols can be hexadecimal addresses. Signed-off-by: Ian Rogers <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metricJin Yao12-12/+12
The kernel utilization metric does multiplexing currently and is somewhat unreliable. The problem is that it uses two instances of the fixed counter, and the kernel has to multipleplex which causes errors. So should use CPU_CLK_UNHALTED.THREAD instead. Before: # perf stat -M Kernel_Utilization -- sleep 1 Performance counter stats for 'sleep 1': 1,419,425 cpu_clk_unhalted.ref_tsc:k <not counted> cpu_clk_unhalted.ref_tsc (0.00%) After: # perf stat -M Kernel_Utilization -- sleep 1 Performance counter stats for 'sleep 1': 746,688 cpu_clk_unhalted.thread:k # 0.7 Kernel_Utilization 1,088,348 cpu_clk_unhalted.thread Signed-off-by: Jin Yao <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Reviewed-by: Kan Liang <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf events parser: Add missing Intel CPU events to parserAdrian Hunter1-5/+7
perf list expects CPU events to be parseable by name, e.g. # perf list | grep el-capacity-read el-capacity-read OR cpu/el-capacity-read/ [Kernel PMU event] But the event parser does not recognize them that way, e.g. # perf test -v "Parse event" <SNIP> running test 54 'cycles//u' running test 55 'cycles:k' running test 0 'cpu/config=10,config1,config2=3,period=1000/u' running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u' running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/' running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp' -> cpu/event=0,umask=0x11/ -> cpu/event=0,umask=0x13/ -> cpu/event=0x54,umask=0x1/ failed to parse event 'el-capacity-read:u,cpu/event=el-capacity-read/u', err 1, str 'parser error' event syntax error: 'el-capacity-read:u,cpu/event=el-capacity-read/u' \___ parser error test child finished with 1 ---- end ---- Parse event definition strings: FAILED! This happens because the parser splits names by '-' in order to deal with cache events. For example 'L1-dcache' is a token in parse-events.l which is matched to 'L1-dcache-load-miss' by the following rule: PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT opt_event_config And so there is special handling for 2-part PMU names i.e. PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc but no handling for 3-part names, which are instead added as tokens e.g. topdown-[a-z-]+ While it would be possible to add a rule for 3-part names, that would not work if the first parts were also a valid PMU name e.g. 'el-capacity-read' would be matched to 'el-capacity' before the parser reached the 3rd part. The parser would need significant change to rationalize all this, so instead fix for now by adding missing Intel CPU events with 3-part names to the event parser as tokens. Missing events were found by using: grep -r EVENT_ATTR_STR arch/x86/events/intel/core.c Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf script: Allow --symbol to accept hexadecimal addressesStephane Eranian1-4/+17
This patch extends the perf script --symbols option to filter on hexadecimal addresses in addition to symbol names. This makes it easier to handle cases where symbols are aliased. With this patch, it is possible to mix and match symbols and hexadecimal addresses using the --symbols option. $ perf script --symbols=noploop,0x4007a0 Signed-off-by: Stephane Eranian <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf report/top TUI: Fix title line formattingArnaldo Carvalho de Melo1-4/+4
In d10ec006dcd7 ("perf hists browser: Allow passing an initial hotkey") the hist_entry__title() call was cut'n'pasted to a function where the 'title' variable is a pointer, not an array, so the sizeof(title) continues syntactically valid but ends up reducing the real size of the buffer where to format the first line in the screen to 8 bytes, which makes the formatting at the title at each refresh to produce just the string "Samples ", duh, fix it by passing the size of the buffer. Cc: Adrian Hunter <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Fixes: d10ec006dcd7 ("perf hists browser: Allow passing an initial hotkey") Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf top: Support hotkey to change sort orderJin Yao1-2/+9
It would be nice if we can use a hotkey in perf top browser to select a event for sorting. For example: perf top --group -e cycles,instructions,cache-misses Samples Overhead Shared Object Symbol 40.03% 45.71% 0.03% div [.] main 20.46% 14.67% 0.21% libc-2.27.so [.] __random_r 20.01% 19.54% 0.02% libc-2.27.so [.] __random 9.68% 10.68% 0.00% div [.] compute_flag 4.32% 4.70% 0.00% libc-2.27.so [.] rand 3.84% 3.43% 0.00% div [.] rand@plt 0.05% 0.05% 2.33% libc-2.27.so [.] __strcmp_sse2_unaligned 0.04% 0.08% 2.43% perf [.] perf_hpp__is_dynamic_en 0.04% 0.02% 6.64% perf [.] rb_next 0.04% 0.01% 3.87% perf [.] dso__find_symbol 0.04% 0.04% 1.77% perf [.] sort__dso_cmp When user press hotkey '2' (event index, starting from 0), it indicates to sort output by the third event in group (cache-misses). Samples Overhead Shared Object Symbol 4.07% 1.28% 6.68% perf [.] rb_next 3.57% 3.98% 4.11% perf [.] __hists__insert_output 3.67% 11.24% 3.60% perf [.] perf_hpp__is_dynamic_e 3.67% 3.20% 3.20% perf [.] hpp__sort_overhead 0.81% 0.06% 3.01% perf [.] dso__find_symbol 1.62% 5.47% 2.51% perf [.] hists__match 2.70% 1.86% 2.47% libc-2.27.so [.] _int_malloc 0.19% 0.00% 2.29% [kernel] [k] copy_page 0.41% 0.32% 1.98% perf [.] hists__decay_entries 1.84% 3.67% 1.68% perf [.] sort__dso_cmp 0.16% 0.00% 1.63% [kernel] [k] clear_page_erms Now the output is sorted by cache-misses. v2: --- Zero the history if hotkey is pressed. Signed-off-by: Jin Yao <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf top: Support --group-sort-idx to change the sort orderJin Yao2-0/+9
'perf report' supports the option --group-sort-idx, which sorts the output by the event at the index n in event group. For example: perf record -e cycles,instructions,cache-misses perf report --group --group-sort-idx 2 --stdio The perf-report output is sorted by cache-misses. This patch supports --group-sort-idx in perf-top. For example: perf top --group -e cycles,instructions,cache-misses --group-sort-idx 2 The perf-top output is sorted by cache-misses. Signed-off-by: Jin Yao <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf symbols: Fix arm64 gap between kernel start and module endKemeng Shi2-0/+28
During execution of command 'perf report' in my arm64 virtual machine, this error message is showed: failed to process sample __symbol__inc_addr_samples(860): ENOMEM! sym->name=__this_module, start=0x1477100, addr=0x147dbd8, end=0x80002000, func: 0 The error is caused with path: cmd_report __cmd_report perf_session__process_events __perf_session__process_events ordered_events__flush __ordered_events__flush oe->deliver (ordered_events__deliver_event) perf_session__deliver_event machines__deliver_event perf_evlist__deliver_sample tool->sample (process_sample_event) hist_entry_iter__add iter->add_entry_cb(hist_iter__report_callback) hist_entry__inc_addr_samples symbol__inc_addr_samples __symbol__inc_addr_samples h = annotated_source__histogram(src, evidx) (NULL) annotated_source__histogram failed is caused with path: ... hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__hists annotated_source__alloc_histograms src->histograms = calloc(nr_hists, sizeof_sym_hist) (failed) Calloc failed as the symbol__size(sym) is too huge. As show in error message: start=0x1477100, end=0x80002000, size of symbol is about 2G. This is the same problem as 'perf annotate: Fix s390 gap between kernel end and module start (b9c0a64901d5bd)'. Perf gets symbol information from /proc/kallsyms in __dso__load_kallsyms. A part of symbol in /proc/kallsyms from my virtual machine is as follows: #cat /proc/kallsyms | sort ... ffff000001475080 d rpfilter_mt_reg [ip6t_rpfilter] ffff000001475100 d $d [ip6t_rpfilter] ffff000001475100 d __this_module [ip6t_rpfilter] ffff000080080000 t _head ffff000080080000 T _text ffff000080080040 t pe_header ... Take line 'ffff000001475100 d __this_module [ip6t_rpfilter]' as example. The start and end of symbol are both set to ffff000001475100 in dso__load_all_kallsyms. Then symbols__fixup_end will set the end of symbol to next big address to ffff000001475100 in /proc/kallsyms, ffff000080080000 in this example. Then sizeof of symbol will be about 2G and cause the problem. The start of module in my machine is ffff000000a62000 t $x [dm_mod] The start of kernel in my machine is ffff000080080000 t _head There is a big gap between end of module and begin of kernel if a samll amount of memory is used by module. And the last symbol in module will have a large address range as caotaining the big gap. Give that the module and kernel text segment sequence may change in the future, fix this by limiting range of last symbol in module and kernel to 4K in arch arm64. Signed-off-by: Kemeng Shi <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hewenliang <[email protected]> Cc: Hu Shiyuan <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] [ refreshed the patch on current codebase, added string.h include as strchr() is used ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf build-test: Honour JOBS to override detection of number of coresArnaldo Carvalho de Melo1-3/+7
When one does: $ make -C tools/perf build-test The makefile in tools/perf/tests/ will, just like the main one, detect how many cores are in the system and use it with -j. Sometimes we may need to override that, for instance, when using icecream or distcc to use multiple machines in the build process, then we need to, as with the main makefile, use: $ make JOBS=N -C tools/perf build-test Fix the tests makefile to honour that. Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf script: Add --show-cgroup-events optionNamhyung Kim2-0/+44
The --show-cgroup-events option is to print CGROUP events in the output like others. Committer testing: [root@seventh ~]# perf record --all-cgroups --namespaces /wb/cgtest [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.039 MB perf.data (487 samples) ] [root@seventh ~]# perf script --show-cgroup-events | grep PERF_RECORD_CGROUP -B2 -A2 swapper 0 0.000000: PERF_RECORD_CGROUP cgroup: 1 / perf 12145 11200.440730: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) perf 12145 11200.440733: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) -- cgtest 12145 11200.440739: 193472 cycles: ffffffffb90f6fbc commit_creds+0x1fc (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12145 11200.440790: 2691608 cycles: 7fa2cb43019b _dl_sysdep_start+0x7cb (/usr/lib64/ld-2.29.so) cgtest 12145 11200.440962: PERF_RECORD_CGROUP cgroup: 83 /sub cgtest 12147 11200.441054: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12147 11200.441057: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) -- cgtest 12148 11200.441103: 10227 cycles: ffffffffb9a0153d end_repeat_nmi+0x48 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12148 11200.441106: 273295 cycles: ffffffffb99ecbc7 copy_page+0x7 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12147 11200.441133: PERF_RECORD_CGROUP cgroup: 88 /sub/cgrp1 cgtest 12147 11200.441143: 2788845 cycles: ffffffffb94676c2 security_genfs_sid+0x102 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12148 11200.441162: PERF_RECORD_CGROUP cgroup: 93 /sub/cgrp2 cgtest 12148 11200.441182: 2669546 cycles: 401020 _init+0x20 (/wb/cgtest) cgtest 12149 11200.441247: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) [root@seventh ~]# Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf top: Add --all-cgroups optionNamhyung Kim2-0/+19
The --all-cgroups option is to enable cgroup profiling support. It tells kernel to record CGROUP events in the ring buffer so that 'perf top' can identify task/cgroup association later. Committer testing: Use: # perf top --all-cgroups -s cgroup_id,cgroup,pid Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Link: http://lore.kernel.org/lkml/[email protected] [ Extracted the HAVE_FILE_HANDLE from the followup patch ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf record: Add --all-cgroups optionNamhyung Kim5-2/+27
The --all-cgroups option is to enable cgroup profiling support. It tells kernel to record CGROUP events in the ring buffer so that perf report can identify task/cgroup association later. [root@seventh ~]# perf record --all-cgroups --namespaces /wb/cgtest [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.042 MB perf.data (558 samples) ] [root@seventh ~]# perf report --stdio -s cgroup_id,cgroup,pid # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 558 of event 'cycles' # Event count (approx.): 458017341 # # Overhead cgroup id (dev/inode) Cgroup Pid:Command # ........ ..................... .......... ............... # 33.15% 4/0xeffffffb /sub 9615:looper0 32.83% 4/0xf00002f5 /sub/cgrp2 9620:looper2 32.79% 4/0xf00002f4 /sub/cgrp1 9619:looper1 0.35% 4/0xf00002f5 /sub/cgrp2 9618:cgtest 0.34% 4/0xf00002f4 /sub/cgrp1 9617:cgtest 0.32% 4/0xeffffffb / 9615:looper0 0.11% 4/0xeffffffb /sub 9617:cgtest 0.10% 4/0xeffffffb /sub 9618:cgtest # # (Tip: Sample related events with: perf record -e '{cycles,instructions}:S') # [root@seventh ~]# Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Link: http://lore.kernel.org/lkml/[email protected] [ Extracted the HAVE_FILE_HANDLE from the followup patch ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf record: Support synthesizing cgroup eventsNamhyung Kim4-0/+129
Synthesize cgroup events by iterating cgroup filesystem directories. The cgroup event only saves the portion of cgroup path after the mount point and the cgroup id (which actually is a file handle). Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Link: http://lore.kernel.org/lkml/[email protected] [ Extracted the HAVE_FILE_HANDLE from the followup patch, added missing __maybe_unused ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf report: Add 'cgroup' sort keyNamhyung Kim5-0/+54
The cgroup sort key is to show cgroup membership of each task. Currently it shows full path in the cgroupfs (not relative to the root of cgroup namespace) since it'd be more intuitive IMHO. Otherwise root cgroup in different namespaces will all show same name - "/". The cgroup sort key should come before cgroup_id otherwise sort_dimension__add() will match it to cgroup_id as it only matches with the given substring. For example it will look like following. Note that record patch adding --all-cgroups patch will come later. $ perf record -a --namespace --all-cgroups cgtest [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.208 MB perf.data (4090 samples) ] $ perf report -s cgroup_id,cgroup,pid ... # Overhead cgroup id (dev/inode) Cgroup Pid:Command # ........ ..................... .......... ............... # 93.96% 0/0x0 / 0:swapper 1.25% 3/0xeffffffb / 278:looper0 0.86% 3/0xf000015f /sub/cgrp1 280:cgtest 0.37% 3/0xf0000160 /sub/cgrp2 281:cgtest 0.34% 3/0xf0000163 /sub/cgrp3 282:cgtest 0.22% 3/0xeffffffb /sub 278:looper0 0.20% 3/0xeffffffb / 280:cgtest 0.15% 3/0xf0000163 /sub/cgrp3 285:looper3 Signed-off-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf cgroup: Maintain cgroup hierarchyNamhyung Kim5-5/+109
Each cgroup is kept in the perf_env's cgroup_tree sorted by the cgroup id. Hist entries have cgroup id can compare it directly and later it can be used to find a group name using this tree. Signed-off-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf tools: Basic support for CGROUP eventNamhyung Kim13-1/+74
Implement basic functionality to support cgroup tracking. Each cgroup can be identified by inode number which can be read from userspace too. The actual cgroup processing will come in the later patch. Reported-by: kernel test robot <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> [ fix perf test failure on sampling parsing ] Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf tools: Add file-handle feature testNamhyung Kim4-2/+28
The file handle (FHANDLE) support is configurable so some systems might not have it. So add a config feature item to check it on build time so that we don't add the cgroup tracking feature based on that. Committer notes: Had to make the test use the same construct as its later use in synthetic-events.c, in the next patch in this series. i.e. make it be: struct { struct file_handle fh; uint64_t cgroup_id; } handle; To cope with: CC /tmp/build/perf/util/cloexec.o util/synthetic-events.c:428:22: error: field 'fh' with CC /tmp/build/perf/util/call-path.o variable sized type 'struct file_handle' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] struct file_handle fh; ^ 1 error generated. Deal with this at some point, i.e. investigate if the right thing is to remove that -Wgnu-variable-sized-type-not-at-end from our CFLAGS, for now do the test the same way as it is used looks more sensible. Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] [ split from a larger patch, removed blank line at EOF ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf python: Include rwsem.c in the pythong bidingArnaldo Carvalho de Melo1-0/+1
We'll need it for the cgroup patches, and its better to have it in a separate patch in case we need to later revert the cgroup patches. I.e. without this we have: [root@five ~]# perf test -v python 19: 'import perf' in python : --- start --- test child forked, pid 148447 Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: /tmp/build/perf/python/perf.cpython-37m-x86_64-linux-gnu.so: undefined symbol: down_write test child finished with -1 ---- end ---- 'import perf' in python: FAILED! [root@five ~]# Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03rtc: ds1307: check for failed memory allocation on wdtColin Ian King1-0/+2
Currently a failed memory allocation will lead to a null pointer dereference on point wdt. Fix this by checking for a failed allocation and just returning. Addresses-Coverity: ("Dereference null return") Fixes: fd90d48db037 ("rtc: ds1307: add support for watchdog timer on ds1388") Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2020-04-03Documentation: PM: sleep: Document system-wide suspend code flowsRafael J. Wysocki2-0/+271
Add a document describing high-level system-wide suspend code flows in Linux. Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-03cpufreq: Select schedutil when using big.LITTLELinus Walleij1-0/+1
When we are using a system with big.LITTLE HMP configuration, we need to use EAS to schedule the system. As can be seen from kernel/sched/topology.c: "EAS can be used on a root domain if it meets all the following conditions: 1. an Energy Model (EM) is available; 2. the SD_ASYM_CPUCAPACITY flag is set in the sched_domain hierarchy. 3. no SMT is detected. 4. the EM complexity is low enough to keep scheduling overheads low; 5. schedutil is driving the frequency of all CPUs of the rd;" This means that at the very least, schedutil needs to be available as a scheduling policy for EAS to work on these systems. Make this explicit by defaulting to the schedutil governor if BIG_LITTLE is selected. Currently users of the TC2 board (like me) has to figure these dependencies out themselves and it is not helpful. Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sudeep Holla <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-03ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirkFrantišek Kučera1-0/+42
Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card. The MIDI controller part is standard but the PCM part is "vendor specific". Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE. Input is not working. Signed-off-by: František Kučera <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-03Merge branch 'topic/pcm-oss-fix' into for-linusTakashi Iwai0-0/+0
An empty merge for the original fix for PCM OSS regression where the same fix is already applied in a different form. Signed-off-by: Takashi Iwai <[email protected]>
2020-04-03ALSA: pcm: oss: Fix regression by buffer overflow fix (again)Takashi Iwai1-10/+12
[ This is essentially the same fix as commit ae769d355664, but it's adapted to the latest code for 5.7; hence it contains no Fixes or other tags for avoid backport confusion -- tiwai ] The recent fix for the OOB access in PCM OSS plugins (commit f2ecf903ef06: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a regression on OSS applications. The patch introduced the size check in client and slave size calculations to limit to each plugin's buffer size, but I overlooked that some code paths call those without allocating the buffer but just for estimation. This patch fixes the bug by skipping the size check for those code paths while keeping checking in the actual transfer calls. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.