aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-06leds: sort Makefile entriesPavel Machek1-50/+50
Sort Makefile entries to reduce risk of rejects. Signed-off-by: Pavel Machek <[email protected]>
2020-04-06leds: old enums are not really applicable to new codePavel Machek1-0/+1
Warn about old defines that probably should not be used. Signed-off-by: Pavel Machek <[email protected]>
2020-04-06leds: ip30: label power LED as suchPavel Machek1-1/+1
Make label "white:power" to be consistent with dt-bindings/leds/common.h . Signed-off-by: Pavel Machek <[email protected]>
2020-04-06leds: lm3532: make bitfield 'enabled' unsignedColin Ian King1-1/+1
The bitfield 'enabled' should bit unsigned, so make it unsigned. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Pavel Machek <[email protected]>
2020-04-06blk-mq: don't commit_rqs() if none were queuedKeith Busch1-3/+6
Unburden the drivers from checking if a call to commit_rqs() is valid by not calling it when there are no requests to commit. Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-04-06PM / sleep: handle the compat case in snapshot_set_swap_area()Christoph Hellwig1-32/+22
Use in_compat_syscall to copy directly from the 32-bit ABI structure. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-06PM / sleep: move SNAPSHOT_SET_SWAP_AREA handling into a helperChristoph Hellwig1-28/+29
Move the handling of the SNAPSHOT_SET_SWAP_AREA ioctl from the main ioctl helper into a helper function. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-06NFS: Clean up process of marking inode stale.Trond Myklebust5-8/+19
Instead of the various open coded calls to set the NFS_INO_STALE bit and call nfs_zap_caches(), consolidate them into a single function nfs_set_inode_stale(). Signed-off-by: Trond Myklebust <[email protected]>
2020-04-06Merge tag 'acpi-5.7-rc1-2' of ↵Linus Torvalds27-77/+155
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Additional ACPI updates. These update the ACPICA code in the kernel to the 20200326 upstream revision, fix an ACPI-related CPU hotplug deadlock on x86, update Intel Tiger Lake device IDs in some places, add a new ACPI backlight blacklist entry, update the "acpi_backlight" kernel command line switch documentation and clean up a CPPC library routine. Specifics: - Update the ACPICA code in the kernel to upstream revision 20200326 including: * Fix for a typo in a comment field (Bob Moore) * acpiExec namespace init file fixes (Bob Moore) * Addition of NHLT to the known tables list (Cezary Rojewski) * Conversion of PlatformCommChannel ASL keyword to PCC (Erik Kaneda) * acpiexec cleanup (Erik Kaneda) * WSMT-related typo fix (Erik Kaneda) * sprintf() utility function fix (John Levon) * IVRS IVHD type 11h parsing implementation (Michał Żygowski) * IVRS IVHD type 10h reserved field name fix (Michał Żygowski) - Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai) - Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri Kammela) - Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans de Goede) - Fix documentation of the "acpi_backlight" kernel command line switch (Randy Dunlap) - Clean up the acpi_get_psd_map() CPPC library routine (Liguang Zhang)" * tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86: ACPI: fix CPU hotplug deadlock thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID ACPI: Update Tiger Lake ACPI device IDs ACPI: video: Use native backlight on Acer Aspire 5783z ACPI: video: Docs update for "acpi_backlight" kernel parameter options ACPICA: Update version 20200326 ACPICA: Fixes for acpiExec namespace init file ACPICA: Add NHLT table signature ACPICA: WSMT: Fix typo, no functional change ACPICA: utilities: fix sprintf() ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support ACPICA: Change PlatformCommChannel ASL keyword to PCC ACPICA: Fix IVRS IVHD type 10h reserved field name ACPICA: Implement IVRS IVHD type 11h parsing ACPICA: Fix a typo in a comment field ACPI: CPPC: clean up acpi_get_psd_map()
2020-04-06drm/i915/gem: Flush all the reloc_gpu batchChris Wilson1-3/+5
__i915_gem_object_flush_map() takes a byte range, so feed it the written bytes and do not mistake the u32 index as bytes! Fixes: a679f58d0510 ("drm/i915: Flush pages on acquisition") Signed-off-by: Chris Wilson <[email protected]> Cc: Matthew Auld <[email protected]> Cc: <[email protected]> # v5.2+ Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 30c88a47f1abd5744908d3681f54dcf823fe2a12) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-04-06drm/i915/gem: Ignore readonly failures when updating relocsChris Wilson1-4/+2
If the user passes in a readonly reloc[], by the time we notice we have already committed to modifying the execobjects, or have indeed done so already. Reporting the failure just compounds the issue as we have no second pass to fall back to anymore. "Be damned if you do, and damned if you don't." Testcase: igt/gem_exec_reloc/readonly Fixes: 7dc8f1143778 ("drm/i915/gem: Drop relocation slowpath") References: fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error") Signed-off-by: Chris Wilson <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Joonas Lahtinen <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 97a37c919f6262fe75afc4a4eb838093bf18b032) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-04-06drm/i915/gt: Fill all the unused space in the GGTTChris Wilson1-10/+27
When we allocate space in the GGTT we may have to allocate a larger region than will be populated by the object to accommodate fencing. Make sure that this space beyond the end of the buffer points safely into scratch space, in case the HW tries to access it anyway (e.g. fenced access to the last tile row). v2: Preemptively / conservatively guard gen6 ggtt as well. Reported-by: Imre Deak <[email protected]> References: https://gitlab.freedesktop.org/drm/intel/-/issues/1554 Signed-off-by: Chris Wilson <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Imre Deak <[email protected]> Cc: [email protected] Reviewed-by: Matthew Auld <[email protected]> Reviewed-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4d6c18590870fbac1e65dde5e01e621c8e0ca096) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-04-06drm/i915/dp: Return the right vswing tablesJosé Roberto de Souza1-2/+3
DDI ports have its encoders initialized with INTEL_OUTPUT_DDI type and later eDP ports that have the type changed to INTEL_OUTPUT_EDP. But for all other DDI ports it can drive HDMI or DP depending on what user connects to the ports. ehl_get_combo_buf_trans() and tgl_get_combo_buf_trans() was checking for INTEL_OUTPUT_DP that was never true, causing wrong vswing tables being used. So here replacing the INTEL_OUTPUT_DP checks by the valid output types that this functions receives as parameters. HDMI cases will be correctly handled as it do not use encoder->type, instead it calls the functions with INTEL_OUTPUT_HDMI as type parameter and HDMI don't have retraining. v2: changed INTEL_OUTPUT_DDI to INTEL_OUTPUT_EDP and INTEL_OUTPUT_HDMI Fixes: bd3cf6f7ce20 ("drm/i915/dp/tgl+: Update combo phy vswing tables") Cc: Clinton A Taylor <[email protected]> Cc: Matt Roper <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 70988115ac69ecc249aa0f8e8265e8daf87bc28c) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-04-06drm/i915/icl+: Don't enable DDI IO power on a TypeC port in TBT modeImre Deak1-1/+5
The DDI IO power well must not be enabled for a TypeC port in TBT mode, ensure this during driver loading/system resume. This gets rid of error messages like [drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0) and avoids leaking the power ref when disabling the output. Cc: <[email protected]> # v5.4+ Signed-off-by: Imre Deak <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit f77a2db27f26c3ccba0681f7e89fef083718f07f) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-04-06macsec: fix NULL dereference in macsec_upd_offload()Davide Caratti1-0/+3
macsec_upd_offload() gets the value of MACSEC_OFFLOAD_ATTR_TYPE without checking its presence in the request message, and this causes a NULL dereference. Fix it rejecting any configuration that does not include this attribute. Reported-and-tested-by: [email protected] Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06skbuff.h: Improve the checksum related commentsDexuan Cui1-19/+19
Fixed the punctuation and some typos. Improved some sentences with minor changes. No change of semantics or code. Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> Reviewed-by: Randy Dunlap <[email protected]> Signed-off-by: Dexuan Cui <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06net: dsa: bcm_sf2: Ensure correct sub-node is parsedFlorian Fainelli1-1/+6
When the bcm_sf2 was converted into a proper platform device driver and used the new dsa_register_switch() interface, we would still be parsing the legacy DSA node that contained all the port information since the platform firmware has intentionally maintained backward and forward compatibility to client programs. Ensure that we do parse the correct node, which is "ports" per the revised DSA binding. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Vivien Didelot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06qed: remove redundant assignment to variable 'rc'Colin Ian King1-1/+1
The variable 'rc' is being assigned a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06wimax: remove some redundant assignments to variable resultColin Ian King1-5/+2
In function i2400m_bm_buf_alloc there is no need to use a variable 'result' to return -ENOMEM, just return the literal value. In the function i2400m_setup the variable 'result' is initialized with a value that is never read, it is a redundant assignment that can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06Merge tag 'pm-5.7-rc1-2' of ↵Linus Torvalds13-8/+389
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "Additional power management updates. These fix a corner-case suspend-to-idle wakeup issue on systems where the ACPI SCI is shared with another wakeup source, add a kernel command line option to set pm_debug_messages via the kernel command line, add a document desctibing system-wide suspend and resume code flows, modify cpufreq Kconfig to choose schedutil as the preferred governor by default in a couple of cases and do some assorted cleanups. Specifics: - Fix corner-case suspend-to-idle wakeup issue on systems where the ACPI SCI is shared with another wakeup source (Hans de Goede). - Add document describing system-wide suspend and resume code flows to the admin guide (Rafael Wysocki). - Add kernel command line option to set pm_debug_messages (Chen Yu). - Choose schedutil as the preferred scaling governor by default on ARM big.LITTLE systems and on x86 systems using the intel_pstate driver in the passive mode (Linus Walleij, Rafael Wysocki). - Drop racy and redundant checks from the PM core's device_prepare() routine (Rafael Wysocki). - Make resume from hibernation take the hibernation_restore() return value into account (Dexuan Cui)" * tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler() ACPI: PM: Add acpi_[un]register_wakeup_handler() Documentation: PM: sleep: Document system-wide suspend code flows cpufreq: Select schedutil when using big.LITTLE PM: sleep: Add pm_debug_messages kernel command line option PM: sleep: core: Drop racy and redundant checks from device_prepare() PM: hibernate: Propagate the return value of hibernation_restore() cpufreq: intel_pstate: Select schedutil as the default governor
2020-04-06Merge branch 'mlxsw-fixes'David S. Miller1-6/+12
Ido Schimmel says: ==================== mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_{VLAN_MANGLE, PRIORITY} Petr says: The handlers for FLOW_ACTION_VLAN_MANGLE and FLOW_ACTION_PRIORITY end by returning whatever the lower-level function that they call returns. If there are more actions lined up after one of these actions, those are never offloaded. Each of the two patches fixes one of those actions. v2: * Patch #1: Use valid SHA1 ID in Fixes line (Dave) ==================== Signed-off-by: David S. Miller <[email protected]>
2020-04-06mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLEPetr Machata1-3/+6
The handler for FLOW_ACTION_VLAN_MANGLE ends by returning whatever the lower-level function that it calls returns. If there are more actions lined up after this action, those are never offloaded. Fix by only bailing out when the called function returns an error. Fixes: a150201a70da ("mlxsw: spectrum: Add support for vlan modify TC action") Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_PRIORITYPetr Machata1-3/+6
The handler for FLOW_ACTION_PRIORITY ends by returning whatever the lower-level function that it calls returns. If there are more actions lined up after this action, those are never offloaded. Fix by only bailing out when the called function returns an error. Fixes: 463957e3fbab ("mlxsw: spectrum_flower: Offload FLOW_ACTION_PRIORITY") Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06r8169: change back SG and TSO to be disabled by defaultHeiner Kallweit1-15/+14
There has been a number of reports that using SG/TSO on different chip versions results in tx timeouts. However for a lot of people SG/TSO works fine. Therefore disable both features by default, but allow users to enable them. Use at own risk! Fixes: 93681cd7d94f ("r8169: enable HW csum and TSO") Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06net: dsa: bcm_sf2: Do not register slave MDIO bus with OFFlorian Fainelli1-1/+1
We were registering our slave MDIO bus with OF and doing so with assigning the newly created slave_mii_bus of_node to the master MDIO bus controller node. This is a bad thing to do for a number of reasons: - we are completely lying about the slave MII bus is arranged and yet we still want to control which MDIO devices it probes. It was attempted before to play tricks with the bus_mask to perform that: https://www.spinics.net/lists/netdev/msg429420.html but the approach was rightfully rejected - the device_node reference counting is messed up and we are effectively doing a double probe on the devices we already probed using the master, this messes up all resources reference counts (such as clocks) The proper fix for this as indicated by David in his reply to the thread above is to use a platform data style registration so as to control exactly which devices we probe: https://www.spinics.net/lists/netdev/msg430083.html By using mdiobus_register(), our slave_mii_bus->phy_mask value is used as intended, and all the PHY addresses that must be redirected towards our slave MDIO bus is happening while other addresses get redirected towards the master MDIO bus. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Vivien Didelot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06ipv6: rpl: fix loop iterationAlexander Aring1-3/+3
This patch fix the loop iteration by not walking over the last iteration. The cmpri compressing value exempt the last segment. As the code shows the last iteration will be overwritten by cmpre value handling which is for the last segment. I think this doesn't end in any bufferoverflows because we work on worst case temporary buffer sizes but it ends in not best compression settings in some cases. Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06tun: Don't put_page() for all negative return values from XDP programWill Deacon1-4/+6
When an XDP program is installed, tun_build_skb() grabs a reference to the current page fragment page if the program returns XDP_REDIRECT or XDP_TX. However, since tun_xdp_act() passes through negative return values from the XDP program, it is possible to trigger the error path by mistake and accidentally drop a reference to the fragments page without taking one, leading to a spurious free. This is believed to be the cause of some KASAN use-after-free reports from syzbot [1], although without a reproducer it is not possible to confirm whether this patch fixes the problem. Ensure that we only drop a reference to the fragments page if the XDP transmit or redirect operations actually fail. [1] https://syzkaller.appspot.com/bug?id=e76a6af1be4acd727ff6bbca669833f98cbf5d95 Cc: "David S. Miller" <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> CC: Eric Dumazet <[email protected]> Acked-by: Jason Wang <[email protected]> Fixes: 8ae1aff0b331 ("tuntap: split out XDP logic") Signed-off-by: Will Deacon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06Merge tag 'csky-for-linus-5.7-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds34-74/+1807
Pull csky updates from Guo Ren: - Add kproobes/uprobes support - Add lockdep, rseq, gcov support - Fixup init_fpu - Fixup ftrace_modify deadlock - Fixup speculative execution on IO area * tag 'csky-for-linus-5.7-rc1' of git://github.com/c-sky/csky-linux: csky: Fixup cpu speculative execution to IO area csky: Add uprobes support csky: Add kprobes supported csky: Enable LOCKDEP_SUPPORT csky: Enable the gcov function csky: Fixup get wrong psr value from phyical reg csky/ftrace: Fixup ftrace_modify_code deadlock without CPU_HAS_ICACHE_INS csky: Implement ftrace with regs csky: Add support for restartable sequence csky: Implement ptrace regs and stack API csky: Fixup init_fpu compile warning with __init
2020-04-06ASoC: rt5645: Add platform-data for Medion E1239THans de Goede1-0/+8
The Medion E1239T uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like other models following Intel's Brasswell's reference design. This commit adds a DMI quirk pointing to the intel_braswell_platform_data for this model. Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-04-06Merge tag 'fsnotify_for_v5.7-rc1' of ↵Linus Torvalds12-363/+637
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "This implements the fanotify FAN_DIR_MODIFY event. This event reports the name in a directory under which a change happened and together with the directory filehandle and fstatat() allows reliable and efficient implementation of directory synchronization" * tag 'fsnotify_for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: Fix the checks in fanotify_fsid_equal fanotify: report name info for FAN_DIR_MODIFY event fanotify: record name info for FAN_DIR_MODIFY event fanotify: Drop fanotify_event_has_fid() fanotify: prepare to report both parent and child fid's fanotify: send FAN_DIR_MODIFY event flavor with dir inode and name fanotify: divorce fanotify_path_event and fanotify_fid_event fanotify: Store fanotify handles differently fanotify: Simplify create_fd() fanotify: fix merging marks masks with FAN_ONDIR fanotify: merge duplicate events on parent and child fsnotify: replace inode pointer with an object id fsnotify: simplify arguments passing to fsnotify_parent() fsnotify: use helpers to access data by data_type fsnotify: funnel all dirent events through fsnotify_name() fsnotify: factor helpers fsnotify_dentry() and fsnotify_file() fsnotify: tidy up FS_ and FAN_ constants
2020-04-06Merge tag 'for_v5.7-rc1' of ↵Linus Torvalds3-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2/udf updates from Jan Kara: "Cleanups and fixes for ext2 and one cleanup for udf" * tag 'for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: fix empty body warnings when -Wextra is used ext2: fix debug reference to ext2_xattr_cache udf: udf_sb.h: Replace zero-length array with flexible-array member ext2: xattr.h: Replace zero-length array with flexible-array member ext2: Silence lockdep warning about reclaim under xattr_sem
2020-04-06Merge tag '9p-for-5.7' of git://github.com/martinetd/linuxLinus Torvalds5-75/+90
Pull 9p updates from Dominique Martinet: "Not much new, but a few patches for this cycle: - Fix read with O_NONBLOCK to allow incomplete read and return immediately - Rest is just cleanup (indent, unused field in struct, extra semicolon)" * tag '9p-for-5.7' of git://github.com/martinetd/linux: net/9p: remove unused p9_req_t aux field 9p: read only once on O_NONBLOCK 9pnet: allow making incomplete read requests 9p: Remove unneeded semicolon 9p: Fix Kconfig indentation
2020-04-06xfs: reflink should force the log out if mounted with wsyncChristoph Hellwig1-0/+4
Reflink should force the log out to disk if the filesystem was mounted with wsync, the same as most other operations in xfs. [Note: XFS_MOUNT_WSYNC is set when the admin mounts the filesystem with either the 'wsync' or 'sync' mount options, which effectively means that we're classifying reflink/dedupe as IO operations and making them synchronous when required.] Fixes: 3fc9f5e409319 ("xfs: remove xfs_reflink_remap_range") Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Brian Foster <[email protected]> [darrick: add more to the changelog] Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-04-06xfs: factor out a new xfs_log_force_inode helperChristoph Hellwig4-24/+22
Create a new helper to force the log up to the last LSN touching an inode. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-04-06ACPI: EC: Fix up fast path check in acpi_ec_add()Rafael J. Wysocki1-2/+2
The fast path check in acpi_ec_add() is not incorrect, because in fact acpi_device_hid(device) can be equal to ACPI_ECDT_HID only if boot_ec is not NULL, but it may confuse static checkers, so change it to explicitly check boot_ec upfront and use the slow path if that pointer is NULL. Link: https://lore.kernel.org/linux-acpi/20200406144217.GA68494@mwanda/ Fixes: 3d9b8dd8320d ("ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC") Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-06Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull vfs pathwalk fix from Al Viro: "Dumb braino in legitimize_path()..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a braino in legitimize_path()
2020-04-06fix a braino in legitimize_path()Al Viro1-1/+1
brown paperbag time... wrong order of arguments ended up confusing the values to check dentry and mount_lock seqcounts against. Reported-by: kernel test robot <[email protected]> Fixes: 2aa38470853a ("non-RCU analogue of the previous commit") Tested-by: kernel test robot <[email protected]> Signed-off-by: Al Viro <[email protected]>
2020-04-06Merge branches 'acpi-cppc', 'acpi-video' and 'acpi-drivers'Rafael J. Wysocki9-38/+30
* acpi-cppc: ACPI: CPPC: clean up acpi_get_psd_map() * acpi-video: ACPI: video: Use native backlight on Acer Aspire 5783z ACPI: video: Docs update for "acpi_backlight" kernel parameter options * acpi-drivers: thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID ACPI: Update Tiger Lake ACPI device IDs
2020-04-06Merge branch 'acpica'Rafael J. Wysocki15-31/+115
* acpica: ACPICA: Update version 20200326 ACPICA: Fixes for acpiExec namespace init file ACPICA: Add NHLT table signature ACPICA: WSMT: Fix typo, no functional change ACPICA: utilities: fix sprintf() ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support ACPICA: Change PlatformCommChannel ASL keyword to PCC ACPICA: Fix IVRS IVHD type 10h reserved field name ACPICA: Implement IVRS IVHD type 11h parsing ACPICA: Fix a typo in a comment field
2020-04-06ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tabletHans de Goede1-0/+11
The MPMAN MPWIN895CL tablet almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-04-06ASoC: stm32: sai: Add missing cleanupJulia Lawall1-1/+3
The commit 0d6defc7e0e4 ("ASoC: stm32: sai: manage rebind issue") converts some function calls to their non-devm equivalents. The appropriate cleanup code was added to the remove function, but not to the probe function. Add a call to snd_dmaengine_pcm_unregister to compensate for the call to snd_dmaengine_pcm_register in case of subsequent failure. Fixes: commit 0d6defc7e0e4 ("ASoC: stm32: sai: manage rebind issue") Signed-off-by: Julia Lawall <[email protected]> Acked-by: Olivier Moysan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-04-06Merge branches 'pm-sleep' and 'pm-cpufreq'Rafael J. Wysocki8-8/+288
* pm-sleep: Documentation: PM: sleep: Document system-wide suspend code flows PM: sleep: Add pm_debug_messages kernel command line option PM: sleep: core: Drop racy and redundant checks from device_prepare() PM: hibernate: Propagate the return value of hibernation_restore() * pm-cpufreq: cpufreq: Select schedutil when using big.LITTLE cpufreq: intel_pstate: Select schedutil as the default governor
2020-04-06drm/virtio: fix OOB in virtio_gpu_object_createJiri Slaby1-6/+8
After commit f651c8b05542 ("drm/virtio: factor out the sg_table from virtio_gpu_object"), virtio_gpu_create_object allocates too small space to fit everything in. It is because it allocates struct virtio_gpu_object, but should allocate a newly added struct virtio_gpu_object_shmem which has 2 more members. So fix that by using correct type in virtio_gpu_create_object. Signed-off-by: Jiri Slaby <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Fixes: f651c8b05542 ("drm/virtio: factor out the sg_table from virtio_gpu_object") Cc: Gurchetan Singh <[email protected]> Cc: Gerd Hoffmann <[email protected]> Signed-off-by: Gerd Hoffmann <[email protected]> (cherry picked from commit 0666a8d7f6a4530440e59f2d22ed4091f4d3818c)
2020-04-06s390/cio: generate delayed uevent for vfio-ccw subchannelsCornelia Huck1-0/+5
The common I/O layer delays the ADD uevent for subchannels and delegates generating this uevent to the individual subchannel drivers. The vfio-ccw I/O subchannel driver, however, did not do that, and will not generate an ADD uevent for subchannels that had not been bound to a different driver (or none at all, which also triggers the uevent). Generate the ADD uevent at the end of the probe function if uevents were still suppressed for the device. Message-Id: <[email protected]> Fixes: 63f1934d562d ("vfio: ccw: basic implementation for vfio_ccw driver") Reviewed-by: Eric Farman <[email protected]> Signed-off-by: Cornelia Huck <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-06s390/cio: avoid duplicated 'ADD' ueventsCornelia Huck1-4/+9
The common I/O layer delays the ADD uevent for subchannels and delegates generating this uevent to the individual subchannel drivers. The io_subchannel driver will do so when the associated ccw_device has been registered -- but unconditionally, so more ADD uevents will be generated if a subchannel has been unbound from the io_subchannel driver and later rebound. To fix this, only generate the ADD event if uevents were still suppressed for the device. Fixes: fa1a8c23eb7d ("s390: cio: Delay uevents for subchannels") Message-Id: <[email protected]> Reported-by: Boris Fiuczynski <[email protected]> Reviewed-by: Peter Oberparleiter <[email protected]> Reviewed-by: Boris Fiuczynski <[email protected]> Signed-off-by: Cornelia Huck <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-06s390/qdio: clear DSCI early for polling driversJulian Wiedmann3-26/+2
Polling drivers in a configuration with 1 Input Queue currently keep their DSCI armed all the way through the poll cycle, until qdio_start_irq() clears it. _Any_ intermittent QDIO interrupt delivered to tiqdio_thinint_handler() will thus cause 1) the 'adapter_int' statistic to be incremented, 2) a call to tiqdio_call_inq_handlers() for this device, and then 3) the 'int_discarded' statistics to be incremented. This causes overhead & complexity in the IRQ path, along with ambiguity in the statistics. On the other hand the device should be in IRQ avoidance mode during a poll cycle, so there won't be a lot of DSCI ping-pong that this micro-optimization could prevent. So align the DSCI handling with what we already do for devices with multiple Input Queues: clear it right away while processing the IRQ. For the non-polling path this means that we no longer need to handle the 1-queue case separately. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-06s390/qdio: inline shared_ind()Julian Wiedmann1-11/+8
This is just prep work for a subsequent patch, no functional change. For the non-polling path we can pull the code chunk in front of the for-loop, since it only evaluates to true for a 1-queue configuration. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-06s390/qdio: remove cdev from init_dataJulian Wiedmann4-10/+8
It's no longer needed. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-06s390/qdio: allow for non-contiguous SBAL array in init_dataJulian Wiedmann5-63/+25
Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers() for each individual queue. But when later passing the SBAL addresses to qdio_establish(), they need to be in a single array of pointers. So if the driver uses multiple Input or Output queues, it needs to allocate a temporary array just to present all its SBAL pointers in this layout. This patch slightly changes the format of the QDIO initialization data, so that drivers can pass a per-queue array where each element points to a queue's SBAL array. zfcp doesn't use multiple queues, so the impact there is trivial. For qeth this brings a nice reduction in complexity, and removes a page-sized allocation. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-06zfcp: inline zfcp_qdio_setup_init_data()Julian Wiedmann1-25/+17
In preparation for a subsequent patch, move the setup of init_data into the only caller. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.